Yamaha CRW2216E-NB manual

User Guide Guide de l’utilisateur Bedienungsanleitung CR W2216E SERIES ON / DISC READ / WRITE English Français Deutsch[...]

COMPLIANCE INFORMA TION ST A TEMENT (DECLARA TION OF CONFORMITY PROCEDURE) Responsible P ar ty: Y amaha Systems T echnology , Inc. Address: 100 Centur y Center Cour t San Jose, Calif ornia 95112 T elephone: (408) 467-2330 F AX: (408) 437-8791 T ype of Equipment: CD Recorder Model Name: CR W2216E CR W2216E-NB This de vice complies with Part 15 of th[...]

T his output is value measured at a distance 200mm from the objective lens surface on the optical pick-up block. ANSI Class : Class 1 Material : GaAlAs Wavelength : 783-789 nm Emission Duration : Continuous Laser Output Power : Less than 44.6 µ W* * Laser Diode Properties CLASS 1 LASER PRODUCT LASER KLASSE 1 PRODUKT This compact disc player is cla[...]

WARNING i W ARNING ❢ W ARNING ❢ • The temperature where CR W2216E is located should be between 5ºC and 40ºC (41ºF – 104ºF), when used in a fan-cooled system. • Do not disassemble the CR W2216E cov er to reduce the risk of electric shock. • Always remo ve the disc before transporting CR W2216E.[...]

Important Precautions ii Impor tant Precautions Please read the follo wing precautions before attempting to operate the CR W2216E. • Before recording a disc, be sure to clean the disc and tray using an air aerosol-type dust remov er . A dust particle on the disc may cause recording to fail, producing an unusable disc. • Always record in a dust-[...]

Table of Contents iii Table of Contents Introduction ............................................................................... 1 CRW2216E Features ....................................................... 1 Orange Book Compatible Recording .............................. 2 Chapter 1 - System Configuration ....................................... [...]

Introduction 1 Intr oduction Thank you for purchasing a Y amaha CR W2216E driv e. Please read this manual before using the driv e in order to mak e the best use of the superior CR W2216E functions. After reading, please retain this manual for future reference. CR W2216E Features ■ 2xS Recording (Re writable) - 2xS Recording (Recor dable) - 16xS R[...]

Introduction 2 Orange Book Compatible Recording T rack at Once In this mode, data can be recorded to disc one track at a time. Discs recorded in this mode cannot be played in CD players or CD- R OM driv es other than a CD-R W or a CD-R driv e until the session is closed. Multisession In this mode, data can be recorded to disc in stages (one session[...]

Chapter 1 - System Configuration 3 Chapter 1 - System Configuration Before using the CR W2216E, make sure that you have all of the items on the list of included items. In order to use the CR W2216E, you will require the following. Computer The following operating en vironment is required: • An IBM/A T compatible computer with a 100 MHz or faster[...]

Chapter 1 - System Configuration 4 T ools Phillips screwdriver This is used to remov e the cov er of your computer, and to install the Y amaha CR W2216E driv e. Long nose pliers These are used to insert or remov e the jumper pin when setting the MASTER/SLA VE settings of the Y amaha CR W2216E driv e. Discs ■ CD-R discs Please use discs that are c[...]

Chapter 2 - Installing the Yamaha CRW2216E Drive 5 Chapter 2 - Installing the Y amaha CR W2216E Drive MASTER/SLA VE settings Before you install the CR W2216E in your computer, you must make the MASTER/SLA VE setting. This setting is set by inserting a jumper pin in the jumper switch located on the rear panel of the CR W2216E drive. Important: When [...]

Chapter 2 - Installing the Yamaha CRW2216E Drive 6 Setting the CR W2216E as the MASTER As shown in the diagram at the right, insert the jumper pin into the right edge of the jumper switch. Note: If only the CRW2216E will be connected to the IDE interface connector , connect the CRW2216E to the end of the connector . Setting the CR W2216E as the SLA[...]

Chapter 2 - Installing the Yamaha CRW2216E Drive 7 Installing the CR W2216E drive The following steps will dif fer slightly depending on the type of com- puter you are using. For details on remo ving the cover from your computer , and installing or removing internal de vices, refer to the manual for your computer . (This user guide assumes that a S[...]

Chapter 2 - Installing the Yamaha CRW2216E Drive 8 3. Y our hands or body may be holding a char ge of static elec- tricity . T ouch a metallic portion of the chassis or power suppl y to release any suc h charge. 4. Remove the fr ont cover of a v acant half-height drive bay . For details refer to the manual of your computer . 5. Slide the CR W2216E [...]

Chapter 2 - Installing the Yamaha CRW2216E Drive 9 6. Connect the IDE interface connector . Connect the 40-pin IDE interface connector to the IDE interface located on the rear panel of the CR W2216E drive. Position the connector so that the colored line is at pin 1 (your lower right). 7. Connect the A UDIO cable. Connect the single 4-pin connector [...]

Chapter 2 - Installing the Yamaha CRW2216E Drive 10 A UDIO cable 8. Connect the power suppl y cable. Connect the +12V and +5V 4-pin power cable to the po wer supply interface located on the rear panel of the CR W2216E drive. The shape of the connector makes it impossible to re verse the connec- tions. If you hav e difficulty when inserting the con[...]

Chapter 2 - Installing the Yamaha CRW2216E Drive 11 9. Tighten the four fastening scre ws securely . 10. Attach the cover of y our computer . 11. Connect the power cable to an A C outlet, and switch on your computer . Make sure that the LED located on the panel of the CR W2216E drive is lit. 12. Star t up your operating system, and verify that the [...]

Chapter 3 - Operation 12 Chapter 3 - Operation Front P anel 1 Disc tray The disc is inserted and ejected here. Pressing the eject button will open the tray . 2 Headphone jack This stereo mini jack allows you to connect headphones and listen to audio. 3 Headphone v olume control This control adjusts the volume le vel of the headphone output. Rotatin[...]

Chapter 3 - Operation 13 6 Eject button This button is used to open or close the tray . 7 Manual Eject hole This is used to manually eject a disc that cannot be ejected in the nor- mal way . It is for emergenc y use only . Loading a Disc 1. Press the eject button to open the tra y . 2. Carefully place the disc, label-side up, on the disc tra y . 3.[...]

Chapter 3 - Operation 14 Ejecting the Disc If the CR W2216E is powered on: Press the eject button to eject the disc. Note: Y ou cannot eject the disc if the AT API command prohibits the eject operation while the CRW2216E is r eading data. Caution: Be sur e to r emove the disc after it is completely ejected. (T rying to r emove the disc befor e it i[...]

Chapter 3 - Operation 15 Manual Eject (emer gency use) Here we explain ho w to eject the disc when it cannot be ejected in the normal way; for example, the po wer is shut of f inadvertently or the loading mechanism fails. This technique should be used only as a last resort. Frequent use may lead to malfunction. Y ou’ll need a pin-like object of 2[...]

Troubleshooting 16 T r oubleshooting If CR W2216E is not performing as expected, look up the symptoms in the following table, and take the appropriate correcti ve action. Caution: Applying physical shock or vibration to the CRW2216E while a CD-R disc or CD-RW disc is being written may pr oduce writing errors. Note: In the case of CD-RW fixed packe[...]

Appendix 17 Appendix Specifications Specifications are subject to change without prior notice. Interface A T API (E-IDE) Data Capacity 650MB (74 minutes disc) 550MB (63 minutes disc) Record/Read Speed Writing (CD-R W): 2X speed Writing (CD-R): 1X speed (real-time), 2X speed playback: 9 - 16X speed [Max] (partial CA V) Note) Read CD-D A : 10X spee[...]

Appendix 18 Front P anel Indicator Key ● on: green flashing: green — off ❍ on: orange flashing: orange Status ON/DISC READ/WRITE Reset ❍ ➠ — ❍ ➠ — Ready (no disc) ❍ — Inserting disc ➠ — Ejecting disc — Ready (disc inserted) ● — Seeking ● Preparing to write ● Writing ●❍ Writing (test mode) ● Playback ●?[...]

English: If you hav e any questions, please contact your dealer or one of the following companies. French: Pour plus de détails sur les produits, veuillez v ous adresser à Y amaha ou au distributeur le plus proche figurant dans la liste suiv ante : German: Bei weiteren Fragen wenden Sie sich Sitte an Ihren Händler oder eine der folgenden Firmen[...]