Yamaha RX-A1030 manual

English AV Receiver Owner’s Manual Read the supplied booklet “Safety Brochure” before using the unit.[...]

En 2 CO N T E N T S Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 FEATURES 6 What you can do with the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Part names and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

En 3 Playing back iPod music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Connecting an iPod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Playback of iPod content . . . . . . . . . . . . . . . .[...]

En 4 APPENDIX 129 Frequently asked q uestions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 Power, system and remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

Accessories En 5 Ac cessories Check that the following accessories are supplied with the product.  Remote control  Batteries (AAA, R03, UM-4) (x2)  AM antenna  FM antenna *One of the abo ve is supplie d depending on the region of purchase.  YPAO microphone  Power cable *The supplied po wer cable varies depe nding on the regio n of[...]

FEATURES ➤ What you can do with the unit En 6 FEA TURES Wha t you can do with the unit Speakers BD /D V D playe r HDMI Control Audio/Video TV remote control Audio HDMI Control Audio Audio/Video TV Sequential operat ion of a TV , A V receiver , and BD/D VD play er (HDMI Control) . p.141 Supports 2- to 7-channel (plus fr ont presence) speaker syste[...]

FEATURES ➤ What you can do with the unit En 7 F ull of useful func tions! ❑ Connecting various devices (p .31) A number of HDMI jacks and various inp ut/output jacks on the unit allow you to connect video devices (such as BD/DVD players), audio de vices (such as CD players), game consoles, camcorders, and other devices. ❑ Playing back TV audi[...]

FEATURES ➤ Part names and functions En 8 Fro nt p an el 1 MAIN ZONE z key T urns on/of f (standby) the u nit. 2 Standby indicator Lights up when the unit is in standby mode under any of the following conditions. • HDMI Control is enabled (p.109) • Standby Through is enabled (p.110) • Network Standby is enabled (p.111) • An iPod is being c[...]

FEATURES ➤ Part names and functions En 9 ■ Inside of the front panel door 9 ON SCREEN key Displays the on-screen menu on th e TV . 0 Menu operations keys Cursor ke ys Select a menu or a parameter . ENTER Confirms a selected item. RETURN Returns to the previous screen. A OPTIO N ke y Displays the option menu (p.87). B DISPLA Y ke y Displays stat[...]

FEATURES ➤ Part names and functions En 10 Fr ont display (indicators) 1 HDMI Lights u p when HDMI s ignals are being in put or output . IN Lights up when HDMI signals are being input. OUT1/OUT2 Indicates the HDMI OUT jacks curr ently out putting an HDMI signal. 2 STEREO Lights up when the unit is r eceiving a stereo FM radio signa l. TUNED Lights[...]

FEATURES ➤ Part names and functions En 11 Rear panel 1 PHONO jacks For connecting to a turntable (p.33). 2 DC OUT jack For connecting to an optional accessory . 3 NETWORK jack For connecting to a network (p.37). 4 A V 1–4 jacks For connecting to video/audio playback devices and inputting video/audio signals (p.31 ). 5 A V OUT jacks For outputti[...]

FEATURES ➤ Part names and functions En 12 F ANTENNA jacks For connecting to FM and AM antennas (p. 36). G A UDIO 1–4 jacks For connecting to audio playback devices and inputting audio signals (p.33). H MUL TI CH INPUT jacks For connecting to a device that supports multi-chann el output and inputting audio signals (p. 38). I ZONE OUT ja c ks For[...]

FEATURES ➤ Part names and functions En 13 Remote control 1 Remote c ontr ol s ignal transmitter T ransmits infrar ed signals. 2 SOURCE z key T urns on/off an external device. SOURCE key Sets the remote control to operat e external devices (p.124). This key lights up in green after pr essed. RECEIVER key Sets the r emote control to o perate the u [...]

PREPARATIONS ➤ General setup procedure En 14 PREP ARA TIONS This completes all the preparations. Enjoy playing movies, music, ra dio and other content with the unit! General se tup proc edure 1 Connecting speakers (p .15) Basic speaker configuration (p.16) Select the speaker layout and con nect the speakers to the unit. Advanced speaker configura[...]

PREPARATIONS ➤ Connecting speakers En 15 The unit has 7 built-in amplifiers. Y ou can connect 2 to 9 speakers and up to 2 subwoofers to create the favorite acoustic spac e in your room. Y ou can also apply bi-amp connections, channel ex pansion (using an external pow er amplif ier) or multi-zone configurations to en hance your system (p.20). Func[...]

PREPARATIONS ➤ Connecting speakers En 16 Basic speaker c onfiguration ■ Placing speakers in your r oom Depending on the number of speakers, place the speakers and subwoof er in your room. This section describes the repr esentative s peaker layout examples. ❑ 7.1+2-channel syst em (using both surround back and front pr esence speakers) This sp[...]

PREPARATIONS ➤ Connecting speakers En 17 ❑ 5.1-channel system This speaker system creates Virtual Presence Speaker (VPS) using the front, center and surround speakers to produce a 3-dimensional sound field, and is suited for enjoyin g 5.1-channel contents. ❑ Fr ont 5.1-channel system This speaker system uses the front presence speakers to pr [...]

PREPARATIONS ➤ Connecting speakers En 18 ■ Setting the speaker impedance Under its default settings, the unit is config ur ed for 8-ohm speakers. When connecting 6-ohm speakers, set the speaker impedance to “6  MIN”. In this case, you can also use 4-ohm speakers as the front speakers. 1 Before connecting speakers, connect the power cable[...]

PREPARATIONS ➤ Connecting speakers En 19 Cables necessary for connection (commercially av a ilable) Speaker cables (x the number of speakers) Audio pin cable (two for connecting two subwoofers) Connectio n diag ram Refer to the following diagram and connec t the speakers to the unit. • When using only one surround back speaker , connect it to t[...]

PREPARATIONS ➤ Connecting speakers En 20 Advanc ed sp eak er configuration In addition to the basic speaker configuration (p.16), the unit al so allows you to apply the fo llowing speaker configurations t o enhance your system. Using the four internal amplifiers for front speakers to have more high-quality sounds (Example) (Example) (Example) Bi-[...]

PREPARATIONS ➤ Connecting speakers En 21 ■ Available speak er configurations • When applying one of these configurations, you need to configure the “P ower Amp Assign” setting (p.103) in the “Setup” menu. ❑ 5ch BI-AMP Main zone Multi-zone P ower Amp Assign (p.103) Pag e Output channel (max) Bi-amp External power amplifier (required)[...]

PREPARATIONS ➤ Connecting speakers En 22 ❑ 5ch BI-AMP +SB ❑ 7ch +1ZONE 1 3 45 6 99 7 2 Bi-amp via external amp Speaker Connect to 12 FRONT and EXTRA SP (bi-amp connection) 3 CENTER 45 SURROUND 67 SUR.BACK (PRE OUT) via external power amplifier ER (not used) 9 SUBWOOFER 1–2 2 1 12 3 4 6 99 7 5 Main zone Zone2 • When Zone2 output is enabled[...]

PREPARATIONS ➤ Connecting speakers En 23 ■ C onnecting front speak ers that suppor t bi-amp connections When using front speakers that support b i-amp connections, connect them to the FRONT terminals and E XTRA SP terminals. T o enable the bi-amp function, configure the “Power Amp Assign” setting (p.103) in the “Setup” menu after connec[...]

PREPARATIONS ➤ Connecting speakers En 24 ■ Connecting an external power amplifier When connecting an exter nal power amplifier (pre-main amplifier) to enhance speaker output, connect the input jacks of the power amplifier to the PRE OUT jacks of the unit. The same channel signals are output from the PRE OUT jacks as from their corresponding SPE[...]

PREPARATIONS ➤ Input/output jacks and cables En 25 ■ Video/audio jacks ❑ HDMI jacks T ransmit digital video and digi tal sound through a single jack. Use an HDMI cable. • Use a 19-pin HDMI cable with the HDMI logo. We recommend using a cable less than 5.0 m (16.4 ft) long to prev ent signal qua lity degradation. • The unit’ s HDMI jacks[...]

PREPARATIONS ➤ Connecting a TV En 26 Connect a TV to the unit so that video input to the unit can be outp ut to the TV . Y ou can also enjoy playback of TV audio on the unit. The connection method varies depending on the functions and video input jacks available on your TV . Refer to the instruction manual of the TV and choose a co nnection metho[...]

PREPARATIONS ➤ Connecting a TV En 27 ❑ Necessary settings T o use HDMI Control and ARC, you need to configure the following settings. For details on settings a nd operating your TV , refer to the instruction manual for the TV . 1 After connecting external devices (such as a TV and playback de vice s) and the power cable to the uni t, turn on th[...]

PREPARATIONS ➤ Connecting a TV En 28 ■ Connection Method 2 (HDMI Control-compatible TV ) Connect the TV to the unit with a n HDMI cable and an audio cable (digital optical or stereo pin cable). • The following e xplanation is based on the assumption that y o u ha ve not changed the “HDMI” parameters (p.109) in the “Setup” menu. • HD[...]

PREPARATIONS ➤ Connecting a TV En 29 3 Configure the settings for HDMI Contr ol. a Enable HDMI Contro l on the TV and playback de vi ces (such as a HDMI Control-compatib le BD/D VD play er). b T ur n off the TV’ s main power and then tur n off the unit and pla yba c k devices. c T ur n on the unit and playback devices and then tur n on the TV .[...]

PREPARATIONS ➤ Connecting a TV En 30 ■ Connection Method 4 ( T V wit hout HDMI input jacks) Depending on the video input jacks available on your TV , choose one of the following connections. If you select “AUDIO 1” as the input source by pressing AUDIO 1 or SCENE(TV) on the remote control, the TV audio will be played back on the unit. • I[...]

PREPARATIONS ➤ Connecting playback devices En 31 ■ Connecting another T V or a projector The unit has two HDMI output jacks. If you connect another TV or a pr ojector to the unit with an HDMI cable, you c an switch the TV (or projector) to be used for watching videos with the remote control (p.49). • HDMI Control is not av ailable on the HDMI[...]

PREPARATIONS ➤ Connecting playback devices En 32 ■ Component video connection Connect a video device to the unit with a component video cable and an audio cable (digital coaxial, digital optical or stereo pin cable). Choose a set of input jacks (on the unit) depending on the audio out put jacks available on your video device. If you select the [...]

PREPARATIONS ➤ Connecting playback devices En 33 ■ Composite video connec tion Connect a video device to the unit with a vi deo pin cable and an audio cable (digital coaxial, digital optical, or stereo pin cable). Choose a set of inp ut jacks (on the unit) depending on the audio output ja cks available on your video device. If you select the in[...]

PREPARATIONS ➤ Connecting playback devices En 34 If you select the input source by pressing A V 1–4, AUDIO 1–4 or PHONO on the r emote control, the audio played back on the audio device will be output from the unit. C onnec ting to the jack s on the fron t panel Use the VIDEO AUX jack to temporaril y connect a playback d evice to the unit. Us[...]

PREPARATIONS ➤ Connecting playback devices En 35 ❑ MHL connection Connect an MHL-compatible mobile device (such as smartphones) to the unit with an MHL cable. Y ou ca n enjoy full HD videos and multichannel audio sources stored on the mobile device. The VIDEO AU X (HDMI/MHL IN ) jack of the unit enables you to input videos and audio directly fr[...]

PREPARATIONS ➤ Connecting the FM/AM antennas En 36 Connect the supplied FM/AM antennas to th e unit. Fix the end of the FM antenna to a wall, and place the AM ante nna on a flat surface. Assembling the AM antenna Connecting the AM antenn a • Unwind only the length of cable needed from the AM antenna unit. • The wires of the AM antenna have no[...]

PREPARATIONS ➤ Connecting to a network En 37 Connect the unit to your router with a comme rcially-available STP network cable (CA T -5 or higher straight cable). Y ou can enjoy Inter net radio or music files stored on media servers, such as PCs and Network Attached Storage (NAS ), on the unit. • If you are using a router that suppor ts DHCP , y[...]

PREPARATIONS ➤ Connecting other devices En 38 Connecting a device with analog multi- channel output Y ou can conn ect an analog multi-channel output device such as a DVD player and an SACD player to the MUL TI CH INPUT jacks. If you select “MUL TI CH” as the input source by pressing MUL TI on the remote control, the audio played back on the d[...]

PREPARATIONS ➤ Connecting the power cable En 39 After all the connections are complete, connect the supplied power cable to the unit and then to an AC wall outlet. 7 C onnecting the pow er cable Before connecting the power cable (General model only) Set the switch position of VOL T AGE SELE CTOR according to your local voltage. V oltages are AC 1[...]

PREPARATIONS ➤ Selecting an on-screen menu language En 40 Select the desired on-screen menu language from English (default), Japanese, French, German, S panish, Russian, Italian and Chinese. 1 Press RECEIVER z to turn o n the unit. 2 T urn on the TV and switc h the TV inpu t to display video fr om the unit (HDMI OUT jack). 3 Press ON SCREEN. 4 Us[...]

PREPARATIONS ➤ Optimizing the speaker settings automati cally (YPAO) En 41 The Y amaha Parametric room Acoustic Optimizer (YP AO) function detects speaker connections, measures the distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as volume balanc e and acoustic parameters, to suit your[...]

PREPARATIONS ➤ Optimizing the speaker settings automati cally (YPAO) En 42 The f ollo wing screen appears on th e TV . • T o cancel the oper ation, disconnect the YP AO microphone before starting the measurement. 6 If desired, change th e measuring method (mul ti/single). a Use the cursor k eys to select “Multi P osition” and pre ss ENTER. [...]

PREPARATIONS ➤ Optimizing the speaker settings automati cally (YPAO) En 43 Measuring a t one liste ning positio n (single measure) When “Multi Position” is set to “No”, follow the procedure below for measurement. • Do not stand between the speakers and the YP AO microphone during the measurement process (about 3 minutes). • Move to th[...]

PREPARATIONS ➤ Optimizing the speaker settings automati cally (YPAO) En 44 Measuring at multiple list ening positions (multi measure) When “Multi Position” is set to “Y es”, follow the procedure below for measurement. • Do not stand between the speakers and the YP AO microphone during the measurement process. It takes about 10 minutes t[...]

PREPARATIONS ➤ Optimizing the speaker settings automati cally (YPAO) En 45 6 Disconnect the YP A O micr op hone fr om the unit. This completes optimization of the speaker settings. Checking the meas urement r esults Y ou can c heck the YP AO me asur eme nt r esu lts. 1 After the measurement, use the cursor keys to select “Result” and press EN[...]

PREPARATIONS ➤ Optimizing the speaker settings automati cally (YPAO) En 46 Reloading the previous Y P A O adjustments When the speaker settings you have configured manually are not suitable, follow the procedure below to discard the manual settings and reload the previous YP AO adjustments. 1 In the “Setup” menu, select “Speaker”, “A ut[...]

PREPARATIONS ➤ Optimizing the speaker settings automati cally (YPAO) En 47 Error messages If any error message is displayed during the meas urement, resolve the problem and perform Y P AO again. Error messag e Cause Remedy E-1: No Front SP Front speakers are n ot detected. Follow the on-scr een instructions to exit YP AO, turn off t he unit, and [...]

PREPARATIONS ➤ Optimizing the speaker settings automati cally (YPAO) En 48 W arning messages If a warnin g message is displayed after the measurement, you can still save the measurement r esults by following on-screen inst ructions. However , we recommend you per form YP AO again in or der to use the unit with the optimal speaker settings. War ni[...]

PLAYBACK ➤ Basic playback procedure En 49 PLA Y BA CK 1 T urn on the external devices (such as a TV or BD/D VD player) connected to the unit. 2 Use the input selection keys to select an input sour ce . 3 Start playback on the external de vice or select a radio station. Refer to the instruc tion manual for the e xter nal device. Fo r details o n t[...]

PLAYBACK ➤ Selecting th e input source and favori te settings with one touch ( SCENE) En 50 The SCENE function allows you to select the assigned input sour ce, sound program, HDMI output and variou s settings with just on e touch. Y ou can use up to 12 scenes to register your favorite se ttings and switch them depending on a playback source. 1 Pr[...]

PLAYBACK ➤ Selecting th e input source and favori te settings with one touch ( SCENE) En 51 C onfiguring scene assignments 1 Set the unit to t he condition (suc h as input sour ce and sound pr ogram) that y ou want to assign to a scene. 2 Hold down the desired SCENE ke y until “SET Complete” appears on the front displa y . 3 If you want to co[...]

PLAYBACK ➤ Selecting the sound mode En 52 The unit is equipped with a variety of sound programs and surround decoders that allow you to enjoy playback sources with your favorite sound mode (such as sound field effect or stereo playback). ❑ Selecting a sound program suitable for movies • Pre ss M OVI E rep eate dl y . This mode lets you enjoy [...]

PLAYBACK ➤ Selecting the sound mode En 53 Enjoying stereosc opic sound fields (CINEMA DSP 3D) The unit is equipped with a variety of sou nd pr o grams that utilize Y amaha’ s original DSP tec hnology (CINEMA DSP 3D). It allows you to easily create sound fields like actual movie theaters or concert halls in your room and enjoy nat ural stereosco[...]

PLAYBACK ➤ Selecting the sound mode En 54 ■ Sound programs suitable for movies (MOVIE) The following sound programs are optimi zed for viewing video sources, such as movies, TV programs, and games. ❑ MOVIE THEA TER ❑ ENTERT AINMENT Standard This program cr eates a sound field t hat emphasizes the surround feeling without disturbing the orig[...]

PLAYBACK ➤ Selecting the sound mode En 55 ■ S ound programs suitable for music/stereo playback (MUSIC) The following sound programs are opti mized for listening to music sources. Y ou can also select ster eo playback. ❑ CLASSIC AL ❑ LIVE/CL UB ❑ STEREO • CINEMA DSP 3D (p.53) and Virtual CINEMA DSP (p.53) do not work when “2ch Stereo?[...]

PLAYBACK ➤ Selecting the sound mode En 56 Enjoying unp roc essed playback Y ou can pla y back input sources without any sound field effect processing. ■ Playing back in original channels (straight decode) When the straight decode mode is e nabled, the unit produces stereo sound from the front speakers for 2-channel sources such as CDs, and prod[...]

PLAYBACK ➤ Selecting the sound mode En 57 Enjoying pure high fidelity sound (Pur e Direc t) When the Pure Direct mode is enabled, the unit plays back the selected source with the least circuitry in order to reduce the electrical noise from other circui try (such as the front display). It allows you to enjoy Hi-Fi sound quality . 1 Press PURE DIRE[...]

PLAYBACK ➤ Listening to FM/AM radio En 58 Y ou can t une into a radio station by specifying its frequency or selecting from register e d radio stations. • The radio frequencies differ depending on the country or region where the unit is being used. The explanation of this section uses a display with frequencies used in U.K. and Europe models. ?[...]

PLAYBACK ➤ Listening to FM/AM radio En 59 Registering fav orite radio stations (presets) Y ou can register up to 40 radio st ations as presets. Once you have registered stations, you can easily tune into them by selecting their preset numbers. • Y ou can automatically register FM radio stations that have strong signals and HD Radio stations (U.[...]

PLAYBACK ➤ Listening to FM/AM radio En 60 HD Radio™ tuning (U.S.A. model only) HD Radio T echnology is a new technology that enables FM/AM radio stations to broadcast progra ms digitally . Digital broadcasting provides listeners with radicall y improved audio quality and reception as well as new data services. Furthermore, supplemental program [...]

PLAYBACK ➤ Listening to FM/AM radio En 61 ■ Holding HD R adio™ inf ormation displa y Y ou can hold the HD Radio information currently displayed on the TV (playback screen) and front display by using the hold function. 1 When the desired HD Radio information is displa yed, press OPTION. 2 Use the cursor keys to select “Hold/Unhold” (Hold/U[...]

PLAYBACK ➤ Listening to FM/AM radio En 62 ■ Browse scr een 1 Preset station list Displays the list of preset stat ions. Use the cursor keys ( q / w ) t o select a preset station and pr ess ENTER to tune int o it. 2 Preset number 3 Operation menu Press the cu rsor keys ( r ) and then use the cursor keys ( q / w ) to select an item. Press ENTER t[...]

PLAYBACK ➤ Listening to FM/AM radio En 63 • “Program Service”, “Program T ype”, “Ra dio T ext”, and “Clock Time” are not display ed if the radio station does no t pro vide the Radio Data System service. ■ Receiving traffic information automatically When “TUNER” is selected as the input source, the unit automatically receiv[...]

PLAYBACK ➤ Listening to FM/AM radio En 64 ■ Bro wse screen 1 Preset station list Displays the list of prese t stations. Use the curso r keys ( q / w ) to select a preset station and pr ess ENTER to tune into it. 2 Preset number 3 Operation menu Press the cur s or keys ( r ) and then use the cursor keys ( q / w ) to select an item. Press ENTER t[...]

PLAYBACK ➤ Playing back iPod music En 65 Y ou can pla y back iPod music on the unit using a USB cable supplied with the iPod. • An iP od may not be detected by the unit or some features may not be compatib le, depending on the model or software version of the iP od. • T o play back iP od videos on the unit, an Apple Composite A V Cable (not s[...]

PLAYBACK ➤ Playing back iPod music En 66 Playback of iP od con tent Follow the procedure below to operate the iPod contents and start playback. Y ou c an contr o l the iPod with the menu displayed on the TV screen. 1 Press USB to select “USB” as the input source. The browse screen i s disp la yed on the TV . • If playback is ongoing on y ou[...]

PLAYBACK ➤ Playing back iPod music En 67 ■ Playback screen 1 Status in dicators Display the current sh uffle/r epeat se ttings (p.68) and playback stat us (such as play/pause). 2 Playback information Displays the artist name, album name, song title, and elapsed/r emaining time. Use the cursor ke ys ( q / w ) to select scr ollable information. 3[...]

PLAYBACK ➤ Playing back iPod music En 68 ■ Shuffle/repeat settings Y ou can config ur e the shuffle/repeat settings of your iPod. • During simple play , configure the shuffle/repeat settings directly on your iP od or press MODE to display the TV menu screen and then f ollow the procedure below . 1 When “USB” is selected as the input sour [...]

PLAYBACK ➤ Playing back music stored on a USB storage device En 69 Y ou can play back music files stored on a USB storage device on the unit. Refer to the instruction manuals for the USB storage device for more information. The unit supports USB mass storage class de vices (F A T16 or F A T32 format). • The unit suppor ts W A V (PCM format only[...]

PLAYBACK ➤ Playing back music stored on a USB storage device En 70 2 Use the cursor keys to select an item and press ENTER. If a song is selecte d, pla yback starts and the playbac k screen is displa yed. • T o retur n to the pre vious screen, press RETURN. • Files not suppor ted by the unit cannot be selected. • If the unit detects a ser i[...]

PLAYBACK ➤ Playing back music stored on a USB storage device En 71 ■ Playback screen 1 Status in dicators Display the current sh uffle/r epeat se ttings (p.71) and playback stat us (such as play/pause). 2 Playback information Displays the artist name, album name, song title, and elapsed time. Use the cursor ke ys ( q / w ) to select scr ollable[...]

PLAYBACK ➤ Playing back music stored on media servers (PCs/NAS) En 72 Y ou can play back music files stored on your PC or DLNA-compatible NAS on the unit. • T o use this function, the unit and y ou r PC must be connected to the same router (p.37). Y ou can check whether the network parameters (such as the IP address) are properly assigned to th[...]

PLAYBACK ➤ Playing back music stored on media servers (PCs/NAS) En 73 3 Use the cursor keys to select an item and press ENTER. If a song is selecte d, pla yback starts and the playbac k screen is displa yed. • T o retur n to the pre vious screen, press RETURN. • Files not suppor ted by the unit cannot be selected. • If the unit detects a se[...]

PLAYBACK ➤ Playing back music stored on media servers (PCs/NAS) En 74 ■ Playback screen 1 Status in dicators Display the current sh uffle/r epeat se ttings (p.74) and playback stat us (such as play/pause). 2 Playback information Displays the artist name, album name, song title, and elapsed time. Use the cursor ke ys ( q / w ) to select scr olla[...]

PLAYBACK ➤ Listening to Internet radio En 75 Y ou can listen to Internet radio stations from all over the world. • T o use this function, the unit m ust be connected to the Inter net (p .37). Y ou can check whether the network parameters (such as the IP address) are properly assigned to the unit in “Network” (p.118) in the “Information”[...]

PLAYBACK ➤ Listening to Internet radio En 76 ■ Browse scr een 1 Playbac k indicator 2 List name 3 Cont ents list Displays the list of Internet radi o content . Use the cursor keys ( q / w ) to select an item and press ENTER to confi rm the selection. 4 Item number/total 5 Operation menu Press the cu rsor keys ( r ) and then use the cursor keys [...]

PLAYBACK ➤ Playing back iTunes/iPod mu sic via a netw ork (AirPlay) En 77 The AirPlay function allows you to play back iT unes/iPod music on the unit via network. • T o use this function, the unit and your PC or iP od must be connected to the same router (p.37). Y ou can check whether the network parameters (such as the IP address) are properly[...]

PLAYBACK ➤ Playing back iTunes/iPod mu sic via a netw ork (AirPlay) En 78 • Y ou can tur n on the unit automatically when star ting pla yback on iT unes or iP od by setting “Network Standby” (p.111) in the “Setup” menu to “On”. • Y ou can edit the network name (the unit’s name on the network) display ed on iT unes/iPod in “Net[...]

PLAYBACK ➤ Playing bac k m usic in multiple rooms (multi-zone) En 79 The multi-zone function allows you to play back different input sources in the room wher e the u nit is installed (main zone) and in another room (Zone2). For example, while you are watching TV in the living room (main zone), another person can listen to radio in the study r oom[...]

PLAYBACK ➤ Playing bac k m usic in multiple rooms (multi-zone) En 80 ❑ Enjoying videos/music using only a TV Connection TV : p.82 • Only HDMI video/audio sources can be output to Zone2. T o enjoy the pla yback of an external device in Zone2, you need to connect the de vice to an HDMI jac k of the unit. Prepari ng Zone2 Connect the device that[...]

PLAYBACK ➤ Playing bac k m usic in multiple rooms (multi-zone) En 81 ❑ Using an e xternal amplifier Connect the external amplifier (with volume contr ol) p laced in Zone2 to the unit with a stereo pin cable and connect speakers to the external amplifier . ■ C onnec ting a video moni tor to p lay back analog videos Connect a video monitor to w[...]

PLAYBACK ➤ Playing bac k m usic in multiple rooms (multi-zone) En 82 ■ Connecting an HDMI- compa tible device to play back videos/audio Connect an HDMI-compatible device (s uch as a TV) to play back videos/audio at Zone2. If yo u connect an A V amp lifier , you can enjoy multi-channel playback in another room (Zone2). • T o watch videos playe[...]

PLAYBACK ➤ Playing bac k m usic in multiple rooms (multi-zone) En 83 ■ Operating the unit from Z one2 (remote c onnection) Y ou can operate the unit and exter nal devices fr om Zone2 using the supplied remote control if you connect an infrared signal receiver/emitter to the unit’ s REMOTE IN/OUT jacks. • T o operate external devices with th[...]

PLAYBACK ➤ Playing bac k m usic in multiple rooms (multi-zone) En 84 Co nt ro ll in g Zon e 2 1 Set MAIN/ZONE2 to “ZONE2”. 2 Press RECEIVER z . Each time y ou press the key , Zone2 is enabled or disab led. When Zone2 is enab led, “ZONE2” lights up in the front displa y . 3 Use the input selection keys to select an input sour ce . • Vide[...]

PLAYBACK ➤ Playing bac k m usic in multiple rooms (multi-zone) En 85 ■ O ther opera t ions f or Zone2 The following functions are also available when Zone2 is enabled. Adjusting the volume Press VOLUME or MUTE. Selecting the input source and settings at once (SCEN E) Press SCENE. • T o register the current s ettings (input source , volume and[...]

PLAYBACK ➤ Viewing the current status En 86 Sw itching informa tion on the fron t disp lay 1 Press INFO. Each time y ou press the key , the display ed item changes. About 3 seconds later , the corresponding info rmation for the displa yed item appears . • Av ailable items vary depending on the selected input source . The display ed item can als[...]

PLAYBACK ➤ Configuring playback settings for di fferent p layback sources (Option menu) En 87 Y ou can configure separate playback settin gs for different playback sour ces. This menu is available on the front panel (or on the TV screen), allowing you to easily configure settings during playback. 1 Press OPTION. Front display TV screen 2 Use the [...]

PLAYBACK ➤ Configuring playback settings for di fferent p layback sources (Option menu) En 88 ■ T o ne Cont ro l ( T o ne Con tro l ) Adjusts the high-frequency range (T reble) and low-frequency range (Bass) of sounds. Choices T reble (T reble), Bass (Bass) Setting range -6.0 dB to Bypass (Bypass) to +6. 0 dB, *0.5 dB inc rements Default Bypass[...]

PLAYBACK ➤ Configuring playback settings for di fferent p layback sources (Option menu) En 89 ■ Dialogue Adjust (Dialog Adjust) Adjusts the volume or perceive height of dialogue sounds. ❑ Dialo gue Level (Dialo g L vl) Adjusts the volume of dialogue sounds. If dialogue sounds cannot be heard clearly , you can turn up its volume b y incr easin[...]

PLAYBACK ➤ Configuring playback settings for di fferent p layback sources (Option menu) En 90 ❑ S u b w o o f e r Tr i m ( S W. Tr i m ) Fine-adjusts the subwoofer volume. Setting range -6.0 dB to + 6.0 dB (0.5 dB increments) Default 0.0 dB ■ Enhancer (Enhancer) Enables/disables Compressed Music Enhancer (p.57). • This setting is applied se[...]

PLAYBACK ➤ Configuring playback settings for di fferent p layback sources (Option menu) En 91 ■ FM Mode (FM Mode) (Except for U.S.A. model) Switches between stereo and monaural for FM radio reception. Settings Stereo (St ereo) (default) Receives FM radio in stere o sounds. Mono (Mono) Receives FM radio in monaural sounds.[...]

CONFIGURATIONS ➤ Configuring input sources ( Input menu) En 92 C ONFIGUR A TIONS Y ou can chan ge the input source settings using the TV screen. 1 Press ON SCREEN. 2 Use the cursor keys to select “Input” and press ENTER. 3 Use the cursor keys ( e / r ) to select an input sour ce to be configured and press the cursor key ( q ). The input sourc[...]

CONFIGURATIONS ➤ Configuring input sources ( Input menu) En 93 ■ Rename/Icon Selec t Changes the input source name and icon displayed on the front display or TV screen. Input sources A V 1–7, V -AUX, A UDIO 1–4, PH ONO, USB, MU L TI C H ■ Setup procedure 1 Use the cursor keys ( e / r ) to select a template and pres s the cursor key ( w ).[...]

CONFIGURATIONS ➤ Configuring the SCENE function (Scene menu) En 94 ■ DMC Control Selects whether to allow DLNA-compatible Digital Media Controller (DMC) to control playbac k. Input source SERVER Settings • A Digital Media Controller (DMC) is a device that can control other network devices through the network. When this function is enabled, yo[...]

CONFIGURATIONS ➤ Configuring the SCENE function (Scene menu) En 95 4 Use the cursor keys ( q / w ) to select an item and press ENTER. 5 Use the cursor keys and ENTER to ch ange the setting. 6 T o exit from t he menu, press ON SCREEN. Scene menu items ■ Sav e Registers the unit’ s current settings (such as input source and sound program) in th[...]

CONFIGURATIONS ➤ Configuring the SCENE function (Scene menu) En 96 ❑ Detail Selects items to be included as the scene as signments. Y ou can also view the settings currently assigned to the selected scene. T o include it ems as the scene assignments, use the cursor keys to select an item and press ENTER to check the box (or uncheck the box to e[...]

CONFIGURATIONS ➤ Configuring sound programs/surro und decoders (Sound Program menu ) En 97 Y ou can chan ge the settings of the sound programs and surr ound decoders using the TV screen. 1 Press ON SCREEN. 2 Use the cursor keys to select “Sound Pr ogram” and press ENTER. 3 Use the cursor keys ( e / r ) to select a sound program to be configur[...]

CONFIGURATIONS ➤ Configuring sound programs/surro und decoders (Sound Program menu ) En 98 Sou nd P rogr am m enu i tem s • Av ailable items vary depending on the selected sound program or surround decoder. ■ Settings for sound programs The following items are available when you select “2ch Stereo” or “7ch Stereo”. • Av ailable item[...]

CONFIGURATIONS ➤ Configuring sound programs/surro und decoders (Sound Program menu ) En 99 ■ Settings for decoders The following items are available when you set “Decode T ype” of “SURROUND DECODER” to “ b PLIIx Music” ( b PLII Music) or “Neo:6 Music”. Decode T ype Item Function Settings b PLIIx Mu sic ( b PLII Music) Panorama A[...]

CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 100 Y ou can configure the unit’ s various function with the menu displayed on the TV screen. 1 Press ON SCREEN. 2 Use the cursor keys to select “Setup” and press ENTER. 3 Use the cursor keys ( e / r ) to se lect a menu. 4 Use the cursor keys ( q / w ) to select an item and pre[...]

CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 101 Setu p me nu item s Menu Item Function Pag e Speaker Auto Setup Automatically optimizes the speaker settings (YP AO). 41 Manual Setup Setting Pa ttern Registers two spea ker setting patt erns and switches between t hem. 103 Setting Data Copy Copies the “Setting Pattern” param[...]

CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 102 Netw ork IP Address Configur es the network parameters (such as IP address). 110 Network Standb y Selects whether to enabl e/disable the function that turns on the unit fr om other network devices. 111 MA C Address Filter Sets the MAC addr ess filter to limit access to th e unit [...]

CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 103 Speaker (Manual Setup) Configures the speaker settings manually . ■ Setting Patt ern Registers two speaker setting patter ns and switches between them. When you configure the following speaker settings, the settings will be memorized in the selected patter n. • Measurement re[...]

CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 104 ❑ Cen ter Selects whether or not a center spea ker is connected and its size. Settings ❑ Surround Selects whether or not surround speakers are connected and their sizes. Settings ❑ Surround Back Selects whether or not surround back speakers are connected and their sizes. Se[...]

CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 105 ❑ Extra Bass Sets the speakers to produce the front channel low-frequency components. Settings • This setting is not av ailable when “Subwoof er” is se t to “None”, or when “F ront” is set to “Small”. ❑ Bass C ross Ov er Sets the lower limit of the low-frequ[...]

CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 106 4 Use the cursor keys ( e / r ) to select a center frequen c y from the 7 preset bands and the cursor keys ( q / w ) to adjust the gain. Setting range Gain: -20.0 dB to +6 .0 dB 5 T o fine-a djust the center fre q ue ncy or Q factor (bandwid th), press ENTER repeatedly to sel ect[...]

CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 107 ❑ Adj ustm ent Adjusts the delay between video and audio output manually when “Auto/Manual Select” is set to “Manual”. Y ou can fine- adjust the audio output timing when “Auto/Manual Select” is set to “Auto”. Setting range 0 ms to 500 ms (1 ms increments) Defaul[...]

CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 108 Vi de o Configures the video output settings. ■ Video Mode Enables/disables the video signal pro cessing (resolution and aspect ratio). Settings • When “Video Mode” is set to “Direct”, the unit transmits video signals with the least circuitr y in order to reduce video[...]

CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 109 HDMI Configures the HDMI settings. ■ HDMI Control Enables/disables HDMI Control (p.141). Settings • T o use HDMI control, you need to perform the HDMI Control link setup (p.141) after connecting HDMI Control-compatible devices . ❑ TV A ud io In pu t Selects an audio input j[...]

CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 110 ❑ HDMI OUT1, HDMI OUT2 Enables/disables the audio output from a TV connected to the HDMI OUT 1 jack or HDMI OUT 2 jack. Settings • The HDMI OUT 1–2 jacks output 2-channel audio signals when the unit is tur ned on. ■ Standby Through Select whether to output videos/audio (i[...]

CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 111 6 T o save the changes, us e the cursor keys to select “OK” and press ENTER. 7 T o exit from the menu, press ON SCREEN. ■ Network Standby Selects whether the unit can be tur ned on from other network devices (network standby). Settings ■ MAC A ddress F ilter Sets the MAC [...]

CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 112 Multi Zone Configures the multi zone settings. ■ Main Zone Set Configures the main zone setting. ❑ Zone Rename Changes the zone name (for main zone) displayed on the fr on t display or TV scr een. ■ Procedure 1 Press ENTER to enter the n ame edit screen. 2 Use the cursor ke[...]

CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 113 ❑ Mono Switches between stereo and monaural for Zone2 output. Settings ❑ Zone Scene Rename Changes the scene names (for Zone2) displayed on the front display . ■ Procedure 1 Use the cursor keys to selec t a scene to be renamed and pr ess ENTER. 2 Press ENTER to enter the n [...]

CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 114 Fu nc t io n Configures the functions that make the unit easier to use. ■ Input Assignment Assigns the COMPONENT VIDEO, COAXIAL and OPTICAL jacks to another input source. ■ Procedure Example: assigning the OPTICAL ( e ) jack to the input sour ce “A V 2” 1 Use the cursor k[...]

CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 115 ■ T rigger Output1, T rigger Output2 Sets the TRIGGER OUT 1–2 jacks to function in sync with the power status of each zone or input switching. ❑ Tr i g g e r M o d e Specifies the condition for the TRIGGER OUT jack to func tion. Settings Source Specifies the output level of[...]

CONFIGURATIONS ➤ Configurin g various functions (Setup menu) En 116 ■ Memor y Guard Prevents accidental changes to the settings. Settings • When “Memory Guard” is se t to “On”, the loc k icon ( o ) is display ed on the menu screen. EC O Configures the power supply settings. ■ A uto P ow er Standby Sets the amount of time for the aut[...]

CONFIGURATIONS ➤ Viewing information about the unit (Information menu) En 117 ■ ECO Mode Enables/disables the eco (power saving) mode. When the eco mode is enabled , you can r educe the unit’ s power consumption. Settings • The new setting will take eff ect after the unit is resta rted. • When “ECO Mode” is set to “On”, the front [...]

CONFIGURATIONS ➤ Viewing information about the unit (Information menu) En 118 T y pes of inf o rma tion ■ Audio Signal Displays information about the current audio signal. • Even when the unit is set to output bitstream signals directly , the signal may be con ver ted depending on the specifications and settings of the playback de vice. ■ V[...]

CONFIGURATIONS ➤ Configuring the system sett ings (ADVANCED S ETUP menu) En 119 Configure the system settings of the unit while viewing the front display . 1 Set the unit to standby mode. 2 While holding down STRAIGHT on the fr ont panel, press MAIN ZONE z . 3 Press PROGRAM to select an item. 4 Press STRAIGHT to select a setting. 5 Press MAIN ZON[...]

CONFIGURATIONS ➤ Configuring the system sett ings (ADVANCED S ETUP menu) En 120 T urn ing on /off the re mote co ntrol senso r (REMO TE SENSOR) T ur n on/off the r emote control sensor on the main unit. While the remote control sensor is turned off, you cannot control the unit from the r emot e contr ol. Settings Selecting the remote c ontrol ID [...]

CONFIGURATIONS ➤ Configuring the system sett ings (ADVANCED S ETUP menu) En 121 Removing the limita tion on HDMI video output (MONIT OR CHECK) The unit automatically detects resolutions suppor ted by a TV connected to the HDMI OUT jack. Disable the monitor check function if you want to specify a resolution in “Resolution” (p.108) when the uni[...]

CONFIGURATIONS ➤ Configuring the system sett ings (ADVANCED S ETUP menu) En 122 Updating the firm war e (FIRM UPD A TE) New firmware that provides additional f eatures or product improvements will be released as needed. Updates can be downloaded fr om the Y amaha website. If the unit is connected to the Intern et, you can download the firmware vi[...]

CONFIGURATIONS ➤ Controlling external devices with the remote control En 123 Y ou can u se the unit’ s remote control to operate externa l devices (such as BD/DVD players) if you have registered the remote contr ol code of the external d evice. • Y ou cannot control an external device that does not hav e a remote control sensor . • Ensure t[...]

CONFIGURATIONS ➤ Controlling external devices with the remote control En 124 Registering the remote con trol codes fo r playback devic es Y ou can use the unit’ s remote control to operate playback devices if you have registered their r emote control codes. Y ou can also use the input selection keys to change the playback devices that are contr[...]

CONFIGURATIONS ➤ Controlling external devices with the remote control En 125 Progr amming from other remote controls (learning) (China, Korea, U.K. and Europe models only) The remote control of the unit can r eceive remote contr o l signals from other infrar ed remote contr ols and learn the remote control operation. If you cannot find a remote c[...]

CONFIGURATIONS ➤ Controlling external devices with the remote control En 126 Clearing functions learned from o ther remo te contro ls (China, Korea, U.K. and Europe models only) ■ Clearing the assignment for each key 1 Press CODE SET. SOURCE blinks twice. P erfo rm each of the f ollowing steps within 1 min ute. Otherwise , the settin g will be [...]

CONFIGURATIONS ➤ Controlling external devices with the remote control En 127 Resetting remote control c odes Y ou can reset a remote control code register ed to each input selection key . 1 Press CODE SET. SOURCE blinks twice. P erfo rm each of the f ollowing steps within 1 min ute. Otherwise , the settin g will be canceled . If this happens , re[...]

CONFIGURATIONS ➤ Updating the unit’s firmware via the network En 128 New firmware that provides a dditional features or product improvements will be released as needed. If the unit is connected to the Internet, you can download the firmware via the network and update it. • Y ou can also update the fir mw are using the USB memor y de vice from[...]

APPENDIX ➤ Frequentl y asked questions En 129 APPENDIX The new spea ker sy stem does not provide an ideal sound balance ... If you have changed sp eakers or have a new speaker system, use “Auto Setup” to optimize the speaker settings again (p.41). If you want to adjust the speaker settings manually , u se “Manual Setup” in the “Setup”[...]

APPENDIX ➤ Troubleshooting En 130 Refer to the table below when the unit doe s not function properly . If the problem you are experiencing is not listed below or if the instructions below do not help, tur n off the unit, disconnect the power cable, and contact the nearest authorized Y amaha de aler or service center . First , check the follo wing[...]

APPENDIX ➤ Troubleshooting En 131 The unit cannot be controlled using the remote control. The unit is out of the operating range. Use the remote control with in the operating range (p.5). The batteries are weak. Replace with new batteries. The unit’ s remote contr ol sensor is exposed to direct sunlight or strong l ighting. Adjust the lighting [...]

APPENDIX ➤ Troubleshooting En 132 Aud io Proble m Cause Remedy No sound. Another input sour ce is selected. Select an appropriate inpu t source with the input select ion keys. Signals that the unit cannot r e pr oduce are being input. Some digital audio formats cannot be played back on the unit. T o check the audio format of the input signal, use[...]

APPENDIX ➤ Troubleshooting En 133 Vi de o No sound from the TV (when HDMI Control is used). The TV is set to output audio from the TV speakers. Change the audio output setting on your TV so tha t the TV audio is output from the speakers connected to the unit. A TV that does not support ARC is connected to the unit only with an HDMI cable. Use a d[...]

APPENDIX ➤ Troubleshooting En 134 FM/AM r adio The video is interrupted. (If you are using 2 TVs in the main zone) Another TV is turned off when “HDMI OUT 1+2” is selected. Select “HDMI OUT 1” or “HDMI OUT 2” to output the signals only to the TV you are using (p. 49). (If the HDMI OUT 2 jack is assigned to Zone2) HDMI audio output may[...]

APPENDIX ➤ Troubleshooting En 135 USB and netw ork Proble m Cause Remedy The unit does not detect the USB device. The USB device is not connected to the USB jack secur ely . T ur n of f the unit, reconnect your USB device, and turn the unit on aga in. The file system of the USB device is not F A T16 or FA T32. Use a USB device with F A T16 or F A[...]

APPENDIX ➤ Error indications on the front display En 136 Error indications on the front displa y Message Cause Remedy Access denied Access to the PC is denied. Configure the sharing se ttings and select t he unit as a device to which music contents ar e shared (p.72). Access err or The unit cannot access the USB device. T urn off the unit an d re[...]

APPENDIX ➤ Glossary En 137 Aud io i nfor mati on ■ Audio decoding format Dolb y Digital Dolby Digital is a compressed digital audio format developed by Dolby Laboratories , Inc. that supports 5.1-channel audio. This technology is used for audio on most DVD disc s. Dolby Digital EX Dolby Digital EX creates total 6.1-channel audio from 5.1-channe[...]

APPENDIX ➤ Glossary En 138 Sampling frequency/Quantization bit Sampling frequency and quantization bits indicate the quantity of inform ation when an analog audio signal is digitized. These values are noted as in the following example: “48 kHz/24-bit”. • Sampling frequency Sampling frequency (the number of times the signal is sampled per se[...]

APPENDIX ➤ Glossary En 139 Ya m a h a t e c h n o l o g i e s CINEMA DSP (Digital Sound Field Processor) Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their effect is best experienced in a theater that has many speakers designed for acoustic effects. Since home conditions (such as room size, wall mat[...]

APPENDIX ➤ Glossary En 140 Vi de o s i gn a l f l ow Video signals input from a video device to the unit are output to a TV as shown below . ■ Video c onv ersion table • Y ou can select the resolution and the aspect ratio applied to HDMI-output vide o processing in “Video Mode” (p .108) in the “ Set up” menu. • The unit does not con[...]

APPENDIX ➤ Information on HDMI En 141 Multi-zone output ■ Audio output m : A vailab le *1 Av ailable when “HDMI OUT2 Assign” (p.113) in the “Setup” menu is set to “Zone2” *2 Stereo output [down mixed to 2-channels] when the input source selected in the main zone is selected ■ Video output m : A vailab le *3 Av ailable when “Moni[...]

APPENDIX ➤ Information on HDMI En 142 (Example) T o use HDMI Control, you need to per form the following HDMI Control link setup after connecting the TV and playback devices. • This setup is required ev er y time you add a new HDMI Control-compatible de vice to your system. 1 T urn on the unit, TV , and playback de vices. 2 Enable HDMI Contr ol[...]

APPENDIX ➤ Information on HDMI En 143 HDMI signal c ompatibility Au dio sign als Video signals The unit is compatible with the video signals of the following r esolutions: • When CPPM copy-protected D VD-A udio is play ed back, video/audio signals may not be output, depending on the type of the D VD player . • The unit is not compatible with [...]

APPENDIX ➤ Reference diagram (rear panel) En 144 • The area around the video/audio output jacks is marked in white on the actual product to prevent improper connections. Refer ence diagr am (rear panel) NETWORK DC OUT 5V 0.5A ( 3 NET ) MONITOR OUT/ ZONE OUT HDMI OUT ARC (ZONE OUT) 12 HDMI (1 BD/DVD) A V 1 AV 2 AV 3 A V 4 AV 5 A V 6 A V 7 TRIGGE[...]

APPENDIX ➤ Trademarks En 145 Manufactured under license from Dolby Laboratories. Dolby , Pro Logic, Surround EX and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide pa ten[...]

APPENDIX ➤ Specifications En 146 Input jacks • Analog Audio Audio x 10 (A V 1–4, AUDIO 1–4, PHONO, V -AUX) MUL TI CH INPUT x 1 (8 ch) (FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK L/R, SUBWOOFER) • Digital Audio (Suppor ted fr equencies: 32 kHz to 96 kHz) Optical x 4 (A V 3–4, AUDIO 1, V -AUX) Coaxial x 3 (A V 1–2, AUDIO 2) •V i d[...]

APPENDIX ➤ Specifications En 147 USB • Capable of iPod, Mass Storage Class USB Memory • Current Supply Capacity: 2.1 A Network • PC Client Function • Compatible with DLNA ver . 1.5 • AirPlay suppor ted • Internet Radio Compatible Decoding Formats • Decoding Format - Dolby T rueHD, Dolby Digital Plus - Dolby Digital, Dolby Digital EX[...]

APPENDIX ➤ Specifications En 148 Vid e o S ec t ion • Video Signal T ype [U.S.A., Canada, Korea a nd General models] ................ NTSC [Other mode ls]................ ..................... ..................... .......... P AL • Video Signa l T ype ( V ide o Conversion) ................... .. NTSC/P AL • Video Signal Level Composite ...[...]

APPENDIX ➤ Index En 149 Symbols Exclamation mark (!) 128 Lock icon ( o ) 116 Numerics 16:9 Normal (Aspect, Setup menu) 108 2.1-channel system 17 2ch Stereo (sound program) 55 3.1-channel system 17 4K signal (video signal resolution) 143 5.1-channel system 17 5ch BI-AMP (Power Amp Assign, Setup menu) 103 5ch BI-AMP (speaker configuration) 21 5ch B[...]

APPENDIX ➤ Index En 150 DHCP (IP Address, Setup menu) 110 Dialog Adjust (Option menu) 89 Dialog Lift (Dialog Adjust, Op tion menu) 89 Dialog Lvl (Dialog Adjust, Option menu) 89 Dialogue (Audio Signal, Information menu) 118 Dialogue Adjust (Option menu) 89 Dialogue Level (Dialogue Adjust , Option menu) 89 Dialogue Lift (Dialogue Adjust, Option men[...]

APPENDIX ➤ Index En 151 Input (Audio Signal, Information menu) 118 Input Assignment (Function, Setup menu) 114 Input jack assignment 114 Input menu 92 Input selection key (remote control) 13 Input Trim (Volume Trim, Option menu) 89 Internal Error (error indication) 136 Internal Error (YPA O error message) 47 Internet radio listening 75 IP Address[...]

APPENDIX ➤ Index En 152 PHONO jack 11 Playback device connection 31 Playback device operation (remote control) 124 Please wait (error indication) 136 Power Amp Assign (Speaker, Setup menu) 103 Power cable connection 39 Power management 11 6 Power Mode (DC OUT, Setup menu) 115 PRE OUT jack 12 Preset station selection (FM/AM radio) 59 Program Servi[...]

APPENDIX ➤ Index En 153 Subwoofer (Speaker, Se tup menu) 104 Subwoofer connection 19 Subwoofer Trim (Volume Trim, Option menu) 90 SUR.DECODE (sound mode) 56 Surround (Speaker, Setup menu) 104 Surround Back (Speaker, Setup menu) 104 Surround Back Initial Dela y (Sound Program menu) 98 Surround Back Liveness (Sound Program menu) 98 Surround Back Ro[...]

© 2013 Yamaha Corporation YF341A0/EN[...]