Yamaha RX-A2010 manual

En 1 AV Receiver Owner’s Manual English for U.S.A. Be sure to read “Safety Brochure” (su pplied booklet) before using this unit.[...]

En 2 CO N T E N T S Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 What you can do with this unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Part names and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Fr[...]

En 3 Playing back iPod music/videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Connecting an iPod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Playback of iPod contents . . . . . . . . . . . . . . . . . . . . .[...]

En 4 Frequently asked q uestions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 Power and system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

En 5 Ac cessories Check that the following accessories are supplied with this product. ■ Remote control ■ Batteries (AAA, R03, UM-4) (x 4) Insert into the remo te control in the co rrect polarity (+/-) ■ Simplified remote control ■ Power cable * The figure of the supplied power cable differs depe nding on regions. ■ YPAO microphone ■ AM[...]

En 6 FEA TURES Wha t you can do with this unit Supports 2 to 9 channel speaker system and up to 2 subw oof er co nnections. Allo ws y ou to enjo y fav orite acoustic spaces in v arious styles. Plus, bi-amp conn ections, channel expansion (with ext ernal power -amp) and multi-zone c onfigurations to enhance your system p.21 A utomatically optimi zin[...]

En 7 F ull of useful functions! ● Connecting various devices (p .35) A number of HDMI jacks and various input/output jacks on this unit allow you to connect video devices su ch as BD/DVD players, audio devi ces such as CD players, game consoles and camcorders, and so on. ● Playing back TV audio in surr ound sound with a single HDMI cable connec[...]

En 8 Fro nt pa ne l 1 MAIN ZONE T urns on/off (standby) this unit. 2 Standby indicator Lights up when this u nit is in standby mode under any of the following conditions. - HDMI Control is enabled (p.150 ) - The standby through funct ion is enabled (p.117) - The network standby function is enable d (p.118) - The iPod is being charged (p.99) - An iP[...]

En 9 ■ Inside of the fron t panel co v er 9 ON SCREEN Displays the on-screen menu on th e TV . 0 Menu operation keys Cursor ke ys Select a menu or parameter . ENTER Confirms a selected item. RETURN Returns to the previous scre en. A OPTION Displays the option menu (p.95). B DISPLA Y Display the status information on the TV (p.94). C T ONE/B ALANC[...]

En 10 Fr ont displa y (indicators) 1 HDMI Lights up during normal HDMI communication. IN Lights up when HDMI signals are being input. OUT1/OUT2 Indicate the HDMI OUT jacks curr ently outputting an HDMI signal. 2 TA G Lights up when the selected HD Radio progra m (or song) supports iT unes T agging (p.61). HD Lights up when this unit is r eceiving a[...]

En 11 Rear panel 1 PHONO jacks For connecting a turntable (p.37). 2 DOCK jack For connecting an optional Y amaha pr oducts such as iPod dock (p.71), iPod wireless system (p.71), and Bluetooth receiver (p. 75). 3 A V1~4 jacks For connecting video /audio playback devices t o input video/ audio signals (p.35). 4 NETWORK jac k For connecting to the net[...]

En 12 Remote con trol 1 Remote control signal transmitt er T ransmits infrared signals. 2 SOURCE T urns on/off an external device. SOURCE/RECEIVER Switches the devices (thi s unit or external device) to operate with the r emote contr ol (p.130 ). Y ou can operat e this unit when this key lights up in orange, and a n external device when this key li[...]

En 13 ■ Ins ide o f th e rem ote cont rol cove r H Sound mode keys Select a sound mode (p.54). I INFO Selects the information displayed on the fron t display (p.94). J Numeric keys Enter numerical valu es such as radio fr equencies. K ZONE Switches the zones (main, Zone2 or Zone3 ) to operate with the remote control (p.89). L PA R T Y T urns on/o[...]

En 14 SETUP Now all the preparations are complete. Enjoy play ing movies, music, radio, etc. with this unit! General se tup proc edur e 1 Connecting speakers (p .15) Basic speaker configuration (p.16) Select the speaker layout an d connect the speakers to this unit. Adv anced speaker configuration (p.21) Apply bi-amp connectio ns, channel expansion[...]

En 15 This unit has 9 built-in amplifiers. Y ou can connect 2 to 11 speakers and up to 2 subwoofers (with built-in amplifier) to creat e the favorite acoustic space in your room. Y ou can also apply bi-amp connections, channel ex pansion (using an e xternal power amplif ier) or multi-zone configurations to en hance your system (p.21). Functions of [...]

En 16 Basic speaker c onfigur ation ■ Placing speak ers in y our room Depending on the number of speakers, place the speakers and subwoof er (with built-in amplifier) in your room. This section desc rib es the r epresentative sp eaker layout examples. ❑ 9.2+2 channel system (using both surround back and rear presence speak ers) This speaker sys[...]

En 17 ❑ 7.1 channel sy stem (using fr ont presence speakers) This speaker system uses the front presence speakers to pr oduce a natural stereoscopic sound field, and is suited for enjoying 5.1-channel c ontents. ❑ 7.1 channel sy stem (using surround back speak ers) This speaker system creates Virtual Presence Speaker (VPS) using the front, cent[...]

En 18 ■ Setting the speak er impedance This unit is configured for 8-ohm speakers at the factory . When con necting 6-ohm speakers, set the speaker imped ance to “6 Ω MIN”. In this case, you can also use 4-ohm speakers as the front speakers. 1 Before connecting speakers, conn ect the supplied po wer cable to this unit and then to an A C wall[...]

En 19 ■ C onnecting speakers Connect the speakers placed in your room to this unit. Speakers to be connected If you have 9 speake rs, use two of them as surround back speakers (*1) or rear presence speakers (*2). If you have 7 speakers, use two of them as surround back speakers (*3) or front presence speakers (*4). • Y ou can a lso connect up t[...]

En 20 ❑ C onnecting speaker cables Speaker cables have two wires. One is for conn ecting the negative (-) ter minal of the unit and the speaker , and th e other is for the positi ve (+) ter minal. If the wires ar e colored to prevent confusion, connect the black wire to the negativ e and the other wir e to the positive. a Remove approximately 10 [...]

En 21 Advanc ed speaker c onfigura tion In addition to the basic speaker configuratio n (p.1 6), this unit also allows you to apply the following speaker configurations to enhance your system. Using the four internal amplifiers for front speakers to have more high-quality sounds (Example) (Example) (Ex ample) Bi-amp connection Combining with an ext[...]

En 22 ■ A vailable speaker configur ations • When applying one of these configurations, you need to configure the “P ower Amp Assign” setting (p .109) in the “Setup” menu. • When applying a multi-zone configuration, you can select a zone (Zone2 or Zone3) to be assigned to the EXTRA SP1~2 jacks in “P ower Amp Assign” (p.109) in the[...]

En 23 ❑ 7ch +FRONT+1Z ONE ❑ 5ch +FRONT+2Z ONE via external amp Main zone Zone3 Speaker Connect to FRONT (PRE OUT) via external power amplifier CENTER SURROUND SURROUND BACK EXTRA SP1 (not used) SUBWOOFER 1~2 Zone3 speakers EXTRA SP2 Zone2 Zone3 Main zone via external amp Speaker Connect to FRONT (PRE OUT) via external power amplifier CENTER SUR[...]

En 24 ❑ 7ch +1Z ONE ❑ 9ch +1ZONE Main zone Zone2 Speaker Connect to FRONT CENTER SURROUND SURROUND BACK (not used) (not used) SUBWOOFER 1~2 Zone2 speakers EXTRA SP1 Main zone Zone3 • When Zone3 output is enabled (p.89), the surround back speak ers in the main zone do not output sound. Speaker Connect to FRONT CENTER SURROUND SURROUND BACK EXT[...]

En 25 ❑ 7ch +2Z ONE Zone2 Zone3 Main zone • When Zone3 output is enabled (p.89), the surround back speak ers in the main zone do not output sound. Speaker Connect to FRONT CENTER SURROUND SURROUND BACK (not used) (not used) SUBWOOFER 1~2 Zone2 speakers EXTRA SP1 Zone3 speakers EXTRA SP2 1 Speaker connections 2345678[...]

En 26 ■ Connecting front speakers tha t suppor t bi-amp connections When using front speakers that support b i-amp connections, connect them to the FRONT jacks and EXTRA SP1 jacks. T o enable the bi-amp function, configure the “Power Amp Assign” setting (p.109) in the “Setup” menu after connecting the power cable to an AC wall outlet. ■[...]

En 27 ■ C onnecting an external pow er amplifier When using an external pow er amplifier to enhance speaker output, connect the input jacks of the power amplifier to the PRE OUT jacks of this unit. The same channel signals are output from the PRE OUT jacks as fr om their corr esponding SPEAKERS term inals. 1 FRONT jacks Output fr ont channel soun[...]

En 28 ■ V ideo/audio jacks ❑ HDMI jacks T ransmit digital video and digi tal sound through a single jack. Use an HDMI cable. • Use a 19-pin HDMI cable with the HDMI logo. We recommend using a cable less than 5.0 m (16.4 ft) long to prev ent signal quality degradation. • T o connect a device that has a D VI jack, an HDMI/D VI-D cab le is req[...]

En 29 Connect a TV to this unit so that videos input to this unit can be output to the TV . Y ou can also enjoy playback of TV audio on this unit. The connection method varies depending on f unctions and video input jacks available on your TV . Refer to the instruction manual of the TV and choose a co nnection method. ■ Connection method 1 (HDMI [...]

En 30 ❑ Nec essar y settings T o use HDMI Control and ARC, you need to configur e the following settings. For details on settin gs and operations of your TV , refer to the instruction manua l of the TV . 1 After connecting external devices (TV , pla yback devices, etc.) and power cab le of this unit, t urn on this unit, TV and pla ybac k de vices[...]

En 31 ■ C onnection method 2 (HDMI Control-compatible TV ) Connect the TV to this unit with an HDMI ca bl e and an audio cable (digital optical or stereo pin cable). • The following e xplanation is based on the assumption that you hav e not changed the “HDMI” parameters (p.116) in the “Setup” menu. • HDMI Control is av ailable only on[...]

En 32 3 Configure the settings for HDMI Contr ol. a Enable HDMI Co ntrol on the TV a nd pla yback de vices (HDMI Contr ol-compatib le BD/ D VD play er , etc). b T ur n off th e main po wer of the TV a nd then turn off th is unit and pla ybac k de vice s. c T ur n on th is unit an d pla ybac k de vices and then turn on the mai n po wer of th e TV . [...]

En 33 ■ C onnection method 4 ( TV wit hout HDMI input jacks) Depending on the video input jacks available on your TV , choose one of the following connections. If you select “AUDIO1” as the input source by pressing AUDIO1 or SCENE(TV), the TV audio will be played back on this unit. • If you connect your TV to this unit with a cable other th[...]

En 34 ■ C onnecting another T V or a projector This unit has 2 HDMI output j acks. If you connect anothe r TV or a projector to this unit with an HDMI cable, you c an switch the TVs (or projector) to be used for watching videos with the remote control (p.51). • HDMI Control is not av ailable on the HDMI OUT 2 jack. DOCK FM 75Ω ANTENNA YP B P R[...]

En 35 This unit is equipped wit h a variety of in put jacks including HDM I input jacks to allow you to connect different types of playback devices. For information on how to connect an iPod, a Bluetooth component or a U SB storage device, see the following pages. - Connecting an iPod (p.70) - Connecting a Bluetooth receiver (p.75) - Connecting a U[...]

En 36 ■ C omponent video connection Connect a video device to this unit with a component vid eo cable and an audio cable (digital coaxial, digital optical or stereo pin cable). Choose a set of input jacks (on this unit) depending on the audio out put jacks available on your video device. If you select the input source by pressing A V1~4, the vide[...]

En 37 ■ C omposite video c onnection Connect a video device to this unit with a vi de o pin cable and an audio cable (digital coaxial, digital optical or stereo pin cable). Choose a set of input jacks (on this unit) depending on the audio output ja cks available on your video device. If you select the input source by pressing A V1~4, the video/au[...]

En 38 If you select the input source by pressing A V1~4, AUDIO1~4 or PHON O, the audio played back on the audio device wi ll be output from this unit. C onnecting to the jack s on the front panel Use the VIDEO AUX jacks on the front panel to temporarily connect devices such as a game console and a camcorder to this unit. Before making a connection,[...]

En 39 Connect the supplied FM/AM antennas to th is unit. Assembling and connectin g the AM antenna • Unwind the antenna cable from the AM antenna unit only the length needed. • The wires of the AM antenna have no polarity . Y ou can connect either wire to the AM jack or GND jack. If you connect the GND jack to a commercially-av ailable ground b[...]

En 40 Connect this unit to your router with a comme rcially-available STP network cable (CA T -5 or higher straight cable). Y ou can enjoy Internet radio or music files stored on PCs and DL NA servers such as Network Attached Storage (NAS ) on this unit. • When using a router that suppor ts the DHCP function, the network parameters (IP address, e[...]

En 41 Connecting video/audio rec ording devic es Y ou can connect video/audio recording devices to the A V OUT jacks. These jacks output video/audio signals selected as the input. • The A V OUT jac ks cannot output video/audio signals input through the HDMI or COMPONE NT VIDEO jack s. C onnecting a device with analog multi-channel output Y ou can[...]

En 42 Conn ec ti ng a d evi ce com pati ble with SCENE link playback (remote c onnection) If you have a Y amaha product that has the capability of the SC ENE control signal transmission, you can control the Y amaha product in conjunction with a sc ene selection (p.52) by connecting it to one of the REMO TE (OUT) jacks with a monaural mini-jack cabl[...]

En 43 After all the connections are complete, connect the supplied power cable to t his unit and then to an AC wall outlet. 7 C onnecting the pow er c able +12V 0.1A MAX. AC IN TRIGGER OUT P B P R 1 1 2 O R OUT/ZONE OUT IN OUT 2 IN OUT A V 5A V 6A V 7 1 2 REMOTE P EAKERS CENTER FRONT NE 3/R.PRESENCE BI–AMP ZONE 2/ZONE 3/F.PRESENCE/ R R L L L RS-2[...]

En 44 By using the Y amaha Parametric room Acoustic Optimizer (YP AO) function, this unit automatically detects speaker con nections and distances from the listening posi tion, and optimizes the speaker settings such as volume balance and acoustic parameters to suit your room. Please note the following when using YP AO. • Use YP AO after connecti[...]

En 45 The f ollo wing screen appears on th e TV . • T o cancel the operation, disconnect the YP AO microphone bef ore starting the measurement. 6 If desired, change th e measuring method (multi/ single). a Use the curso r k eys to select “Multi Position” and pres s ENTER. b Use the curs or k eys to select a setting and then press ENTER . Sett[...]

En 46 Measuring at one listening position (single measure) When “Multi Position” is set to “No”, follow the procedure below to make the measurement. • YP A O measurement is not performed correctly when any obstacles are in the room. • During the measurin g process (about 3 minutes), k eep stuff in the corners or remove it from the room.[...]

En 47 Measuring at multiple listening positions (multi measure) When “Multi Position” is set to “Y es”, follow the procedure below to make the measurement. • YP A O measurement is not performed correctly when any obstacles are in the room. • During the measurin g process, k eep stuff in the corners or remove it from the room. It takes a[...]

En 48 Checking the measurement results Y ou can check the YP AO me asur ement results. 1 After the measurement, use the cursor keys to select “Result” and press ENTER. • Y ou can also select “Result” from “A uto Setup” (p .107) in the “Setup” menu. In this case, the previous measurement results are displa yed. The f ollo wing scre[...]

En 49 Error messages If any error message is displayed during the meas urement, resolve the problem and perform Y P AO again. Error m essage Cause Remedy E-1: No Front SP Front speakers are n ot detected. Follow the on-scr een instructions to exit YP AO, turn off this unit, and then chec k the speaker connections. E-2: No Sur . SP Either of surroun[...]

En 50 W arning messages Even if any war ning message is displayed after the measuremen t, you can save the measur ement results by following on-scr een ins tructions. However , we recommend you perform Y P AO again to use this unit with the optimal speaker settings. W arning m essage Cause Remedy W-1: Out of Ph ase Any of the speaker cables may be [...]

En 51 PLA Y BA CK 1 T urn on extern al devi ces (TV , BD/D VD play er , etc.) connected to this unit. 2 Use the input selection keys to select an input sour ce. 3 Start playback on the external de vice, or sele ct a radio station. Refer to the instruc tion manual of the extern al de vice. Fo r details o n the f ollo wing op erations , see th e corr[...]

En 52 The SCENE function allows you to select the assigned input source, sound program, HDMI output and variou s settings at once. Y ou can use up to 12 scenes to register your favorite settings and switch them depending on a playback sour ce. 1 Press SCENE. The input source and settings registered t o the corresponding scene are selected. This uni[...]

En 53 C onfiguring scene assignments Follow the procedure below to register the current status (input source, sound program, etc.) to a scene. As necessar y , you ca n select items to be included as the scene assignments (p.102). 1 Set this unit to the conditi on (input source, sound prog ram, etc.) that y ou wa nt to assign to a scene . 2 Hold dow[...]

En 54 This unit is equipped with a variety of sound programs and surround decoders that allow you to enjoy pla yback sour ces with a favorite sound mode (sound field effect, stereo playback, etc). Selecting a sound program suitable for movies - MOVIE THEA TER category (p .55): Press MOVIE repeatedly . - ENTERT AINMENT category (p.55): Press ENTERT [...]

En 55 Enjoying sound field eff ects (CINEMA DSP) This unit is equipped wit h a variety of sound programs that utilize Y amaha's original DSP technology (CINEMA DSP). It allows you to easily create sound fields like actual movie theaters or concer t halls in your r oom. ■ Sound pr ograms suitable f or movies (MOVIE) The following sound pr ogr[...]

En 56 ■ Sound pr ograms suitable f o r music/stereo play back (MUSIC) The following sound programs are opti mized for listening to music sources. Y ou can also select stereo playback. ❑ CLASSICAL ❑ LIVE/CL UB ❑ STEREO Hall in Mun ich This program simulates a concert hall with approximately 250 0 seats in Munich, using stylish wood for the i[...]

En 57 ■ Enjoying stereoscopic sound fields (CINEMA DSP 3D ) CINEMA DSP 3D enables to create a natural stereoscopic sound field in your r oom. CINEMA DSP 3D functions when both of the following condition s are met. - One of the sound programs (except 2ch Ster eo and 9ch Stereo) is selected (p.55). - “CINEMA DSP 3D Mode” (p.96) in the “Option[...]

En 58 • Y ou ca nnot select the Dolby Pro Logic IIx decoders when headphones are connected or when “Surround Back” in the “Setup” menu is set to “None”. • T o enable 6.1/7.1-channel pla yback from 5.1-channel sources when surround back speakers are used, set “Extended Surround” (p .97) in the “Option” menu to “ PLIIx Movie[...]

En 59 Y ou can tune into a radio station by specifying its fr equency or selecting from register ed radio stations. Since this unit supports the HD Ra dio featur e (p.60), you can select an audio program when this unit is tuned into an HD Radio station that provides multiple audio programs. • If you cannot hav e a good reception on the radio , ad[...]

En 60 • T o select a preset number to which the station will be registered, press MEMOR Y once after tuning into a desired radio station, use PRESET or numeric keys to select a preset number , and then p ress MEMOR Y again. ■ Selec ting a preset station T une into a registered radio station by selecting the preset number . 1 Press TUNER to sele[...]

En 61 ■ Selec ting an HD Radio™ audio progr am Y ou can select an audio program when this unit is tuned into an HD Radio station that provides mult iple audio programs (up to 8). 1 Press PRG SELECT repeatedly to select a desired audio pr ogram. Y ou can als o enter an audio pr ogr am number (1 t o 8) directly b y using the n umeric ke ys. For e[...]

En 62 Operat ing the radio on the TV Y ou can view the radio information or s elect a radio st ation on the TV . 1 Press TUNER to select “TUNER” as the input sour ce. The pla ybac k screen is displa y ed on the TV . ■ Playback scr een 1 T A G/HOLD indicators “T AG” lights up when tagging is available. “HOLD” flashes when the hold func[...]

En 63 ■ Brow se screen 1 Preset station list Displays the list of preset stations. Use the cursor keys to select a pr eset station and press ENTER to tune into it. 2 Preset number 3 Operation menu Use the cursor keys to select an item and pr ess ENTER to confirm the selection. T o close the submenu, pr ess RETURN. • If HD Radio stations are det[...]

En 64 T o listen to Satellite Radio, you’ll need to connect a SIRIUS Satellite Radio tuner (sold separately) to your SIRIUS-Ready receiver . SIRIUS Satellite Radio is available to residents of the US (except Alaska and Hawaii) and Canada. Satellite Radio delivers a variety of commercial-free music fr om categories ranging from Pop, Rock, Country [...]

En 65 Activating SIRIUS Satellite Radio™ subscription Before using the SIRIUS Satellite Radio feature, you need to activate your SIRIUS Satellite Radio subscription. T o activate the subscription, you need the SIRIUS ID which is uniquely assigned to the SiriusConnect tuner . SIRIUS ID is 12-digit number which is indicated on the package of the Si[...]

En 66 • This unit skips the following channels during All Channel Search or Categor y Search. This is not a malfunction. -Channels that are not currently in ser vice. -Channels that you do not subscribe to. -Channels that are locked (p .69). • T o listen to the lock ed channels (p.69), use the numeric ke ys to enter the channel number directly [...]

En 67 Displayi ng the SIRIU S Sate llite Radio ™ information Y ou can switch the SIRIUS Satellite Radio informa tion displayed on the front display . 1 Press INFO . Each time y ou press the k ey , the item sw itches. About 3 seconds later , the inf ormation is displa y ed. Operating SIRIUS Satellite Radio™ on the T V Y ou can view the SIRIUS Sa[...]

En 68 • Y ou ca n also use HOLD on the remote control to enable/disable the hold function. ■ Browse screen 1 Preset channel list Displays the list of preset channels. Use the cursor keys to sel ect a preset channel and press ENTER to r ecall it. 2 Preset number 3 Antenna reception level 4 Operation me nu Use the cursor keys to select an item an[...]

En 69 ■ Restric ting ac cess to specific channels (Parental Lock) Y ou can restrict access to specific SIRIUS Satellite Radio channe ls by setting a Parental Lock code numb er . The locked channel will be skipped during All Channel S ear ch or Category Search. 1 In the playbac k screen or browse screen, select “Parental Loc k”. 2 Use the curs[...]

En 70 Y ou can play back iPod music/videos on this unit using a USB cable supplied with iPod, an optional Y amaha iPod dock (such as YDS- 12) or an optional Y amaha iPod wireless system (YID-W10). • This manual describes both the “iPod” and “iPhone” as the “iP od”. “iP od” means both “iP od” and “iPhone” unless the explana[...]

En 71 ■ Using an iP od dock Refer to the instruction manual of the iPod dock in addition. 1 Set this unit to standb y mode and co nnect the iP od dock to the DOCK jac k. Locate the iP od dock a t the distance as f ar as from th is unit. 2 Connect your iPod to the iP od dock and turn on this unit. • While an iPod is connected to the iP od d oc k[...]

En 72 Playback of iP od conten ts When using a USB cable or an iP od dock, you can control the iPod with the menu displayed on the TV . • When using an iPod wireless system, y ou cannot control the iP od from the TV screen. Operate your iP od itself to select the content and star t pla yback. 1 When using a USB cable: press USB to select “USB?[...]

En 73 ■ Playback scr een 1 Status indicators Display the current sh uffle/r epeat se ttings (p. 74) and playback st atus (play/pause, etc). 2 Playback inf ormation Displays the artist name, album name, song title and elapsed/remai ning time. Use the cursor keys to select information to be scrolled. 3 Album image 4 Operation menu Use the cursor ke[...]

En 74 ■ Shuffle/repeat settings Y ou can configure the shuffle/r epeat settings of your iPod. • When using an iPod wireless system, configure the shuffle/repeat settings directly on your iP od. • During simple play , configure the shuffle/repeat settings directly on your iPod, or press MODE to display the TV menu screen and then f ollow the p[...]

En 75 Y ou can play back music stored on a Bluetooth component on this unit using a Y amaha Bluetooth wireless audio receiver (such as YBA-10, optional). Refer to the instruction manuals of the Bluetooth receiver and your Bluetooth component in addition. This unit supports A2DP (Ad vanced Audio Distribution Profile) of the Bluetooth profile. • Wh[...]

En 76 4 Select the Bluetooth receiver fr om the device list and enter the pass key “0000”. “Completed” appears when the pai ring is complete. • Depending on Bluetooth components, “BT connected” appears when the pairing is complete. In this case, the wireless connection has been already established. Y ou just need to star t pla yback o[...]

En 77 Y ou can play back music files stored on a USB storage device on this unit. Refer to the instruction manuals of the USB storage device in addition. This unit supports USB mass storag e class devices (F A T16 or F A T32 f ormat, except USB HDDs). • This unit supports playback of W AV (PCM format only), MP3, WMA, MPEG-4 AA C and FLAC files. ?[...]

En 78 ■ Brow se screen 1 Status indicators Display the current sh uffle/r epeat se ttings (p. 79) and playback st atus. 2 List name 3 Contents list Displays the list of USB storage device contents. Use the cursor keys to select an item and press ENTER to confi rm the selection. 4 Item number/total 5 Operation menu Use the cursor keys to select an[...]

En 79 ■ Shuffle/repeat settings Y ou can configure the shuffle/r epeat settings for playback of USB storage device contents. • The shuffle/repeat settings are shared by USB and network sources. 1 When “USB” is selected as the input sour ce, press OPTION. 2 Use the cursor keys to sele ct “Shuffle” (Shuffle) or “Repeat” (Repeat) and p[...]

En 80 Y ou can play back music files stored on your PC or DLNA- compatible NAS on this unit. • T o use this function, this unit and your PC must be connected to the network properly (p.40). Y ou can check whether the network parameters (IP address, etc.) are properly assigned to this unit in “Networ k” (p .124) in the “Inf ormation”. • [...]

En 81 • T o return to the previous screen, press RETURN. • Files not suppor ted by this unit are not listed (or cannot be selected ev en if listed). • Y ou can register y our fa vorite items as shortcuts (p.91) and access them directly by selecting the shortcut numbers. ■ Brow se screen 1 Status indicators Display the current sh uffle/r epe[...]

En 82 ■ Shuffle/repeat settings Y ou can configure the shuffle/r epeat settings for playback of PC music contents. • The shuffle/repeat settings are shared by USB and network sources. 1 When “PC” is selected as the input source, press OPTION. 2 Use the cursor keys to sele ct “Shuffle” (Shuffle) or “Repeat” (Repeat) and press ENTER. [...]

En 83 Y ou can listen to Internet radio sta tions using the vT uner Internet radio station database service par t icularly customized for this unit, providing a database of numerous radio stations in the world. • T o use this function, this unit must be connected to the Inter net (p .40). Y ou can check whether the network parameters (IP address,[...]

En 84 • By adding your fa v orite Inter net radio stations to “Bookmarks”, you can access to them quickly from “Bookmarks”. T o remov e stations from “Bookmarks”, select the station in “Bookmarks” and then “Bookmar k Off ”. • Y ou ca n also register y our fa vorite Internet radio stations by accessing the following w ebsite [...]

En 85 The multi-zone function allows you to play back separate input sources in the room wher e this unit is installed (main zone) and other rooms (Zone2 and Zone3). For example, while you are watching a TV in the living room (main zone), another person can listen to radio in the bedroom (Zone2), and another can listen to PC music in the study room[...]

En 86 ■ Using an e xternal amplifier Connect the external amplifier placed in Zone2 or Zone3 to this unit with a stereo pin cable. P B P R YP B P R YP B P R HDMI (1 BD/DVD) MONITOR OUT/ZONE OUT I AV 1 AV 3 AV 2 AV 3 AV 4 AV 5 COMPONENT VIDEO MULTI CH INPUT ZONE OUT CENTER SUBWOOFER ZONE 2 ZONE 3 FRONT SURROUND SUR. BACK SPEAKERS ZONE 2/ZONE 3/R.P[...]

En 87 ■ Connecting a zone video monito r Connect a zone video monitor to watch video s at Zone2 or Zone3. Depending on the video input j acks available on your video monitor , choose one of the video connection methods. • The following f eatures are also av ailab le for Zone2 or Zone3. - Navigating contents on the browse screen or vie wing inf [...]

En 88 ■ Operating this unit from another room (remote connection) By connecting an infrared signal receiver/emitter to the REMOTE1 (IN/OUT) or REMOTE2 (IN/OUT) j acks of th is unit, you can operate this unit and externa l devices fr om Zone2 or Zone3 with the supplied remote control. • T o operate e xternal devices with the supplied remote cont[...]

En 89 Cont rol lin g Zon e2 o r Zon e3 1 Press ZONE repeatedly to select a zone. Each time y ou press the k ey , the zone to be oper ated swi tc he s. 2 Press RECEIVER . Each time y ou press the k ey , audio output to the selecte d zone is enab led or disab led. When audio output to an y of z ones is enab led, the corresponding zon e indicator ligh[...]

En 90 ■ Other operations for Zone2 or Z one3 The following functions are also available when audio output to the zone you want to operate is enab led. Adjusting the volume Press VOLUME or MUTE. Selecting the input source and settings at once (SCEN E) Press SCENE. • T o register the current settings (input source, volume and tone control) to a s[...]

En 91 Registering fav orite items (shortcut) Y ou can register up to 40 favorite USB and network contents as shortcuts and access them dir ectly by selecting the shortcut numbers. • Y ou ca n also use the “Bookmarks” feature to register Internet radio stations (p.83). ■ Registering an item Select a desired item and register it to a shortcut[...]

En 92 C ontrolling this unit from the w eb bro wser (web c ontrol) Y ou can control this unit with the web control scr een displayed in the web browser . • T o use this function, this unit a nd y our PC must be connected to the netw ork properly (p.40). • Some security software installed on your PC may bloc k the access of this unit to your PC.[...]

En 93 ■ Control screen 1 PLA Y INFO Selects an input source or co ntrols playback for the sel ected zone. 2 TO P M E N U Moves to the top menu screen. 3 SCENE Select a scene for the select ed zone. 4 PO WER T urns on/off the power for the selected zone. 5 VO L U M E Adjusts the volume or mutes the audio output for the select ed zone. Y ou can als[...]

En 94 V iewing the current status ■ Switching inf ormation on the front display 1 Press INFO . Each time y ou press the k ey , the displa y item s witches . About 3 seconds later , the corresponding inf ormation appears. • Av ailable items v ary depending on the selected input so urce . Also , the display item can be applied separately to each [...]

En 95 Y ou can configure the playback-related setti ngs in accor dance with a playback source. Since this menu is operational on the front panel (or on the TV screen), you can easily configure the settings during playback. 1 Press OPTION. Front display TV screen 2 Use the cursor keys to select an item and press ENTER. • T o return to the previous[...]

En 96 ■ T o n e Co nt rol ( T on e Co nt ro l) Adjusts the high-frequency range (T reble) and low-frequency range (Bass) of speaker sounds. When connecting headphon es, you can adjust high-frequency range and low- frequency range of sounds output from headphones. Choices T reble (T reble), Bass (Bass) Setting range -6.0db ~ Bypass (Bypass) ~ +6.0[...]

En 97 ■ Extended Surround (EXTD Surround) Selects how to play back 5.1- to 7. 1-channel sources when su rround back speakers are used. Settings ■ V olume T rim ( V olume T rim) Corrects volume differ ences between input sources. If you are bothered by volume differences when switching between input s ources, use this function to correct it. •[...]

En 98 C ONFIGURA TIONS Y ou can change the input source settings using the TV screen. 1 Press ON SCREEN. 2 Use the cursor keys to select “Input” and press ENTER. 3 Use the cursor keys ( / ) to select an input source to be configured and press the cursor key ( ). The input source of thi s unit also changes . • Y ou can still s witch the input [...]

En 99 ■ Rename/Ic on Selec t Changes the input source name and icon displayed on the front display or TV screen. Input sources A V1~7, V- AUX, AUDIO1~4, PHONO, USB , DOCK, MUL TI CH ■ Setup procedure 1 Use the cursor keys ( / ) to select an icon an d press the cursor key ( ). 2 Press ENTER, use th e cur sor keys to rename, and then press ENTER [...]

En 100 ■ V ideo Out Selects a video to be output with the au dio input sour ce. Input sources TUNER, Sirius Satellite Radio, (network sources), USB, MUL TI CH Settings ■ DMC C ontrol Selects whether to allow DLNA-compatible Digital Media Controller (DMC) to control playbac k. Input source PC Settings • A Digital Media Controller (DMC) is a de[...]

En 101 5 Use the cursor keys and ENTER to ch ange the setting. 6 T o exit from t he menu, press ON SCREEN. Scene menu items ■ Sa v e Registers the settings currently applied to this unit (input source, sound program, etc.) to the selected scene. • If you hav e changed the input assignment for a scene, y ou also need to change the external devic[...]

En 102 ❑ Detail Selects items to be included as the scene as signments. Y ou can also view the settings currently assigned to the selected scene. T o include items as the scene assignments, use the cursor keys to selec t an item and press ENTER to check the box (or uncheck the box to exclude). For example, if you often adjust the volume while wat[...]

En 103 Y ou can change the settings of the sound programs and surround decoders using the TV screen. 1 Press ON SCREEN. 2 Use the cursor keys to select “S ound Program” and pres s ENTER. 3 Use the cursor keys ( / ) to select a sound pr ogram to be configured and press the cursor ke y ( ). • Y ou can still s witch the sound program by using cu[...]

En 104 Sou nd P ro gr am m en u i te ms • Av ailab le items vary depending on the selected sound program or surround decoder. ■ Settings f or sound programs The following items are available when you select “2ch Stereo” or “9ch Stereo”. • Av ailable items in “9ch Stereo” v ary depending on the speaker system being used. Item Funct[...]

En 105 ■ Settings f or decoders The following items are available when you set “Decode T ype” of “Surround Decoder” to “PLIIx Music” or “Neo:6 Music”. Decode T ype Item Function Settings PLIIx Mus ic Panorama Adjusts the broadening effect of the fr ont sound field. Off (default) , On Select “On” to wrap front right/left channe[...]

En 106 Y ou can configure the various functions of this unit using the TV screen. 1 Press ON SCREEN. 2 Use the cursor keys to select “Setup” and press ENTER. 3 Use the cursor keys ( / ) to select a menu. 4 Use the cursor keys (/) to select an item and press ENTER. • T o return to the previous screen during menu operations, press RETURN. 5 Use[...]

En 107 Setu p me nu it e ms Menu Item Function Pag e Speaker Auto Setup Optimizes th e speaker setting s automatically (Y P AO). 44 Manual Setup Setting Pa ttern Registers t wo speaker set ting patterns and switch es between them. 109 Setting Data Copy Copies the “Setting Pattern” parameters in the specif ied direction. 109 P ower Amp Assign Se[...]

En 108 Netw ork IP Address Configur es the network parameters (IP addr ess, etc). 117 Network Standb y Selects whethe r or not to turn on this unit by the command fr om other network devices. 118 MA C Address Filter Sets the MAC address filter to limit access to this unit f rom other network devices. 118 Multi Zone Zone2 Set Zone3 Set Vo l u m e En[...]

En 109 Speaker (Manual Setup ) Configures the speaker settings manually . ■ Setting P a ttern Registers two speaker setting patter ns and switches between them. When you configure the following speaker settings, the settings will be memorized in the selected patter n. - Measurement r esults (Auto Setup) - Power Amp Assign - Configuration - Distan[...]

En 110 ■ C onfigura tion Configures the output characteristics of the speakers. • When you configure the speaker size , select “Large” if the woofer diameter of y our speaker is 16 cm (6-1/4”) or larger or “Small” if it is smaller than 16 cm (6-1/4”). ❑ Front Selects the size of the front speakers. Settings • “F ront” is aut[...]

En 111 ❑ Subwoo fer 1, Su bwoofer 2 Selects whether or not subwoofer is connected to the S UBWOOFER 1 or SUBWOOFER 2 jack and its phase. Settings • When the bass sound is lacking or unclear , switch the subwoof er phase . ❑ SWFR Lay out Selects a subwoofer layout when 2 subwo ofers ar e used. Settings • This setting is not availab le when ?[...]

En 112 ■ Para met ri c EQ Adjusts sound quality of tone with an equalizer . ❑ PEQ Select Selects a type of equalizer to be used. Settings • “YP A O:Flat”, “YP A O:F ront” and “YP A O:Natural” are av ailable only when the measurement results of “Auto Setup” have already been sa ved (p .44). ❑ PEQ Data C opy Copies the paramet[...]

En 113 Sou nd Configures the audio output settings. ■ Lipsync Adjusts the delay between video and audio output. ❑ Auto Adjusts the delay between video and audio output automatically when a TV that supports an automatic lipsync function is con nected to this unit via HDMI. If necessary , you can fine-adjust the audio output ti ming. “Offset”[...]

En 114 ■ A daptive DSP Le vel Selects whether to automatically adjust the CINEMA DSP effect level in conjunction with volume adjustments. Settings Vi de o Configures the video output settings. ■ Analog to Ana log Con version Enables/disables the video conve rsion (p .149) between the analog video jacks (COMPONENT VID EO, S VIDEO and VIDEO). Set[...]

En 115 ❑ Adjus tment Configures the video adjustments when “Proces sing” is set to “On”. Y ou can r egister the video adjustments a s pr esets (up to 6). ■ Setup procedure 1 Use the cursor keys ( / ) to s elect a preset number and pre ss ENTER. 2 Use the cursor keys ( / ) to s elect an item. 3 Use the cursor keys ( / ) to select a setti[...]

En 116 HDMI Configures the settings related to HDMI. ■ HDMI C ontrol Enables/disables HDMI Control (p.150). Settings • T o use HDMI control, you need to perf orm the HDMI Control link setup (p.150) after connecting HDMI Control-compatible devices . ❑ TV Audio Input Selects an audio input jack of this unit to be used for TV audio input when ?[...]

En 117 ■ Aud io O ut pu t Selects a device to output audio. • The “Amp” and “HDMI OUT1” settings are availab le only when “HDMI Control” is set to “Off ”. ❑ Amp Enables/disables the audio output from the speakers connected to this unit. Settings ❑ HDMI OUT1, HDMI OUT2 Enables/disables the audio output from a TV connected to [...]

En 118 ■ Netw ork Standby Selects whether to tur n on this unit by the command from other network devices (network standby). Settings ■ MA C Address F ilter Sets the MAC address filter to limit acces s to this unit from other network devices. ❑ Mode Enables/disables the MAC address filter . Settings ❑ A ddress Setup Specifies the MAC addres[...]

En 119 ❑ Mon o Switches between stereo and monaural for Zone2 or Zone3 outpu t. Settings ■ Monitor Out A ssign Select the zone for which the MONITOR OUT/ZONE OUT (COMPONENT VID EO, S VIDEO and VIDEO) jacks are used. Settings Main (default), Zone2, Zone3 • The video conversion between the analog video jac ks does not work for multi-z one video[...]

En 120 ■ Zo ne Rename Changes the zone names displayed on the front display or TV screen. ■ Setup procedure 1 Use the cursor keys to sele ct a zone to be renamed and pr ess ENTER. 2 Press ENTER, use th e cur sor keys to rename, and then press ENTER again. 3 Use the cursor keys to sele ct “OK” and press ENTER. • T o clear the entry , selec[...]

En 121 ■ Displa y Set Configures the settings related to the front display and TV screen display . ❑ F ront P anel Display Configures the front display settings. Dimmer Adjusts the brightness of the front display . Setting range -4 ~ 0 (high er to brighten) Defau lt 0 Scroll Sets the scrolling manner of the front display . The display scrolls a[...]

En 122 ❑ T arget Sourc e Specifies the output level of the electronic signal transmitted with each input switching when “T rigger Mode” is set to “Source”. Choices A V1~7, V-AUX, AUDIO1~4, PHON O, TUNER, Sirius Satellite Ra dio, (network so urces), USB , DOCK, MUL TI CH Settings ❑ Man ual Switches the output level for electronic signal [...]

En 123 Y ou can view inform ation about this unit using the TV screen. 1 Press ON SCREEN. 2 Use the cursor keys to select “Information” and press ENTER. 3 Use the cursor keys ( / ) to select an information type. 4 T o exit from t he menu, press ON SCREEN. Ty p e s o f i n f o r m a t i o n ■ Aud io Sig na l Displays information ab out the cur[...]

En 124 ■ Network Displays the network information on this u nit. ■ Syste m Displays the system infor mation on this unit. • If this unit detects a newer firmware over the netw ork, “!” (exclamation mark) appears at the upper r ight of the “Information” and “System” icons, and the corresponding message will be displayed in this scr[...]

En 125 ADV ANCED SETUP menu items Changing the speaker impedance setting (SPEAKER IMP .) Change the speaker impedance settings of unit depending on the impedance of the speakers connected. Settings T urning on/off the remo te c ontrol sensor (REMO TE SENSOR) T urn on/off the remote control sensor on the main unit. While the remote contr ol sensor i[...]

En 126 5 Press ENTER to confirm the settin g. Once the re mote control ID is regis tered successfully , “ OK” appears in the display window . If “ERROR” appears, regi stration failed. Repeat from step 3. 6 T o exit fr om the setup men u, press SET UP . • The registered remote control codes (p.128) are not cleared ev en if you change the r[...]

En 127 Restoring the default settings (INITIALIZE) Restores the default settings for the selected item. Choices Updating the firm ware (FIRM UP D A TE) New firmware will be releas ed irregularly for the purpose o f additional featur es or product improvements. It can be downloaded from our website. If this unit is connected to the Internet, you can[...]

En 128 2 3 5 1 46 TUN./ CH ENHANCER SUR. DECODE HDMI OUT MEMORY INFO AM PAR TY FM 0 10 LEVEL ENT SETUP ZONE 8 7 SLEEP 9 CATEGOR Y SOURCE RECEIVER AV AUDIO 1 2 3 4 5 6 7 V-A UX 1 2 3 4 MULTI PHONO USB NET TUNER DOCK SIRIUS [ A ] CLASSICAL LIVE CLUB ENTERT AIN MOVIE STEREO STRAIGHT INPUT PURE DIRECT MUTE TV SCENE 1 2 3 4 PROGRAM VOLUME TV VOL MUTE MO[...]

En 129 5 Use the numeric keys or cur sor keys to enter the 4-digit remote contr ol and press ENTER. Once the remote control code is set successfully , “OK” appears in the displa y window . If “ERROR” appears , registr ation f ailed. Repeat from step 3. 6 T o exit fr om the setup menu , press SETUP . ❑ TV o pe r at io n s Once you have set[...]

En 130 7 T o exit fr om the setup menu , press SETUP . • For details on how to register the input selection ke y applied the remote control code on a corresponding SCENE key , ref er to “Configuring scene assignments” (p.53). ❑ Pl aybac k dev ice op erati ons Once you have registered the remote control code for your playback device, you can[...]

En 131 5 Aim the infrared transmitters of the remote controls at each other . 6 Pe rform the f ollo wing steps ( a and b ) within 10 seconds. a On this unit, pres s one of the f ollo wing k e ys to which y ou w ant to assign a fu nction. For playback device: SOURCE , menu operations keys, DISPLA Y , MODE, exter nal de vice operation keys, n umeric [...]

En 132 4 Press ENTER. 5 Use the cursor keys to rename. T o locate the position, use the cursor k e ys ( / ). T o sele ct a character (A to Z, a to z, 0 to 9, space, symbols), use th e cursor ke ys ( / ). 6 Press ENTER to set the new name. Once the new na me is set successful ly , “OK” appears i n the displa y windo w . 7 T o edit another device[...]

En 133 ■ Programming macr o operations Y ou can program up to 10 remote contr ol commands for each macro operation key . If you pr ess the corresponding macro operation key , the multiple operations will be carried out sequentially according to the programmed remote contr ol commands. • Before programming macro operations , you need to set the [...]

En 134 Resetting the remote c ontrol c onfigura tions ■ Clearing the remote control configurations Y ou can clear remote contr ol configurat ions by selecting a type of settings or clear all the remote control configurations. 1 Press SETUP . P erf or m each of the f ollo wing st eps within 30 seconds. Otherwise, the setting will be ca nceled. In [...]

En 135 3 Press one of the following keys to select the device for which key assignments will be cl eared. For pla yback devi ce: press the input selec tion ke y . For TV : press TV . 4 Press ENTER. 5 Hold down the ke y to be reset until “OK” appears on the window display . If “NG” or “ERROR” appe ars, clearing f ailed. Repeat from step [...]

En 136 1 Remote control signal transmitt er T ransmits infrared signals. 2 NET/USB Press r epeatedly to select a desired network sour ce or “USB”. 3 SCENE Selects the assigned input sour ce, sound pro gram, HDMI output and various settings at on ce. Additionally , you can turn on this unit when it is in standby mode (p.52). 4 INPUT Selects an i[...]

En 137 If this unit is connecte d to the Internet, the corresponding message will be displayed on the TV when a newer firm war e is available. In this case, follow the procedure below to update the firmware of this unit. • Y ou ca n also update the firmware using the USB memor y de vice from the “AD V ANCED SETUP” menu (p.127). If the followi[...]

En 138 APPENDIX The new spea ker sy stem does not pr ovide an ideal sound balance ... If you have changed sp eakers or speaker s ystem, use “Auto Setup” to optimize the speaker settings again (p .44). If you want to adjust the speaker settings manually , use “Manual Setup” in the “Setup” menu (p.109). Since w e hav e small children, w e[...]

En 139 Refer to the table below when this unit does no t function pr operly . If the problem you are experiencing is not listed below , or if the instructions below do not help, tur n off this unit, disconnect the power cable, and contact the nearest authorized Y amaha dealer or service center . First , check the follo wings: a The po wer cables of[...]

En 140 Aud io Problem Cause Re medy No sound. Another input source is select ed. Select an appropriate inpu t source with the input selection keys Signals that this unit cannot repr oduce ar e being input. Some digital audio formats cannot be played back on this unit. T o check the audio format of the input signal, use “Audio Signal” in the “[...]

En 141 Vi de o Only the fr ont speaker s w ork on multi - channel audio. The playback device is set to ou tput 2-channel audio (PCM, etc.) only . Change the digital audio output setting on the playback device. Noise/hum is heard . This unit is too close to other digital or radio frequenc y device. Move this unit further away from such device. The c[...]

En 142 FM/AM r adio USB and netw ork Problem Cause Re medy FM radio reception is weak or noisy . There is multi-path int erference. Adjust the FM antenna height or orientation , or place it in a differ ent location. Y our area is too far fr om the FM station transmitte r . Press MODE to sel ect “Mono” (monaural r eception) (p.59) . Use an outdo[...]

En 143 Remote control This unit does not detect the PC. The media sharing sett ing is not corr ect. Configur e the sharing setting and select this unit as a device to which music contents are shar ed (p.80). Some security softwar e installed on your PC is blocking the access of this unit to your PC. Check the settings of security soft ware installe[...]

En 144 Error indications on the front displa y Messag e (alphabetic al or der) Cause Remed y Access denied Access to the PC is denied. Configure t he sharing setting and se lect this unit as a device to which musi c contents ar e shared (p .80). Access err or This unit cannot access the USB device. T urn off this uni t and re c onnect your USB devi[...]

En 145 Error indications for SI RIUS Satellit e Radio™ Error indications for iT unes T agging Messag e (alphabetic al or der) Cause Remed y AC QU I RI N G S I G The signal is too weak. Adjust the orientation of the antenna of the SiriusConnect tune r by checking the antenna rec eption level displayed in the front disp lay (p.67) or TV (p.67). ANT[...]

En 146 Aud io i nfor mati on Audio and video synchr onization (Lipsync) Lip sync, an abbreviati on for lip synchronization, i s a technical term that involves both a problem, and the capabilit y of maintaining audio and video signals synchroni zed during post-production and trans mission. Whereas the audio and video l atency requires complex end-us[...]

En 147 DTS Digital Surround DTS Digital Su rround w as developed to replace t he analog soundtracks of movies wit h a 5.1-channel digital s ound track, and is now rapidly gaining populari ty in movie theaters around the world. DTS, I nc. has developed a home theater system so that you can enjoy the depth of sound and nat ural spatial representation[...]

En 148 Vi de o i n fo rm a ti o n Component video signal With the component vi deo signal system, the vi deo signal is separated into the Y signal for luminance and the Pb and Pr signals f or chrominance. Color can be reproduced more faithfully with thi s system because each of these sign als is independent. The component signal is also called t he[...]

En 149 Vi de o s i gn a l f l ow Video signals input from a video device to this unit are output to a TV as shown below . (solid line) is always av ailable. (dotted line) is available only when “Analo g to Analog Co nversion” (p.114) in the “Setup” menu is set to “On” (default). ■ V ideo con v ersion table • Y ou can select a resolu[...]

En 150 HDMI C ontrol HDMI Control allows you to operate exter nal devices via HDMI. If you connect a TV that supports HDMI Control to this unit with an HDMI cable, you can contr ol this unit (power , volume, etc.) in conjunction with TV remo te control operations. Y ou can also control playback devices (HDMI Control-compatible BD/DVD players, etc.)[...]

En 151 HDMI signal c ompa tibility Audio signals Vid e o si gn al s This unit is compatible with the vide o signals of the following resolutions: - 480i/60 Hz - 720 p/60 Hz, 50 Hz - 576i/50 Hz - 108 0i/60 Hz, 50 Hz - 480p/60 Hz - 1080p/60 Hz, 50 Hz, 24 Hz - 576p/50 Hz • When CPPM copy-protected D VD-Audio is pla yed bac k, video/audio signals ma [...]

En 152 • The area around the video/audio output jacks is marked in white on the actual product. Refer ence diagr am (rear panel) +12V 0.1A MAX. AC IN TRIGGER OUT DOCK FM 75Ω ANTENNA YP B P R YP B P R YP B P R OPTICAL A V OUT R L HDMI OUT ARC 1 1 1 2 2 HDMI (1 BD/DVD) MONITOR OUT/ ZONE OUT MONITOR OUT/ZONE OUT IN OUT 2 IN OUT AV 1 AV 1 AV 3 A V 2[...]

En 153 Manufactured under license from Dolby Laboratori es. Dolby , Pro Logic and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent #’ s: 5,451,942; 5,956, 674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7, 392,195; 7,272,567 & other U.S. and worldwide patent s issued[...]

En 154 ❑ Input jacks • Analog Audio Audio x 10 (A V1~4, AUDIO1~4, P HONO, V -A UX) MUL TI CH INPUT (8ch) x 1 (FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK L/R, SUBWOOFER) • Digital Audio (Suppor t fs: 32 kHz to 96 kHz) Optical x 4 (A V3~4, AUDIO1 , V -AUX) Coaxial x 3 (A V1~2, AU DIO2) •V i d e o Composite x 5 (A V1~4, V -AUX) S-video x 5[...]

En 155 ❑ C ompatible Decoding Formats • Decoding Format - Dolby T rueHD, Dolby Digital Plus - DTS-HD Master Audio, DTS-HD High Resolution, DTS Express - Dolby Digital, Dolby Digital EX - DTS, DTS 96/24, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1 • Post Decoding Format - Dolby Pro Logic - Dolby Pro Lo gic II Music, Dolby Pr o Logic II Movie, Dolby[...]

En 156 ❑ FM Se cti on • T uning Range [U.S.A. and Canada models] .............. 87.5 MHz to 107. 9 MHz [Asia and General models] ......... ..................... ......... 87.5/8 7.50 MHz to 108. 0/108.00 MHz [Other mode ls]................ ................. 87.50 MHz to 108.00 MH z • 50 dB Quiet Sensitivity (IHF , 1 kHz, 100% MOD.) Mono .....[...]

© 2011 Y a m a h a Corpor a tion YD505A0/OMEN1[...]

1 TV A.R. Sy stems 0320 Acme 0342 Acura 0323, 0343 ADC 0337 Admiral 005 4, 0178, 0336, 0337, 0339, 0346, 0347 Adve nt 0158 Adventura 0057 Adyson 027 7, 0282, 0342 Agashi 0277, 0282 Agazi 03 37 Aiko 0277, 0282, 0320 , 0323, 0342, 034 3 Aim 0320 Aiwa 00 78, 037 9 Akai 0050, 0055, 0109, 0159, 0181, 0277, 0282, 0320, 0323, 0340, 0343, 0349, 0350 Akiba [...]

2 Crown 0058, 0161, 0171, 0179, 0320, 0323, 0343, 0349, 0350, 035 1 CS Electroni cs 0 277, 0340, 0342 CTC Clatroni c 0341 CTX 0205 Curtis Mathes 0007, 0008, 0010, 0019, 0021, 0026, 0049, 0050, 0178 CXC 0058, 0179 Cybertro n 0340 Cytron 0152 Daewoo 000 7, 0008, 0026, 0037, 0053, 0167, 0266, 0275, 0277, 0282, 0315, 0320, 0323, 0331, 0335, 0342, 0343,[...]

3 Infini ty 0010 InFocus 025 0, 0327, 0363, 0479, 0508 Ingelen 0347 Ingersol 0323, 0343 Initial 0153 Inno Hit 0171, 0282, 0320, 0323, 0340, 0342, 0343, 0349, 0350 Innovation 0337, 03 43 Insignia 0131, 0228, 0236, 0238 Inteq 0030 Interact i ve 0161 Interb uy 0323, 0 343 Interfun k 0161, 0320, 0339 , 0347, 0349, 035 0 Internat ional 0277 Intervis ion[...]

4 Orion 0043, 0146, 0283, 03 20, 0323, 0328, 0343, 0349, 0350 Orline 0320 Osaki 0282, 0320, 0337, 03 40, 0342 Oso 0340 Otto V ersand 0282, 0320, 0336 , 0342, 0344, 0348, 0349, 0350 Pael 0277, 0342 Palladium 0161, 0282, 0320, 0342, 0351 Palsoni c 0282 Panama 0277, 0282, 0320, 0323, 0337, 0342, 0343 Panasonic 0016, 00 17, 0020, 0022, 0023, 0035, 0052[...]

5 0252, 0254, 0326, 0343, 0344, 0371, 0374, 0457, 0475, 048 6 Sound & V ision 0340, 0341 Soundesign 000 8, 0026, 0031, 0058, 0059, 017 9 Soundwave 0 320, 0349, 0350 Square vie w 0051 SSS 0008, 0058, 0179 Standard 0282, 0320, 0323, 0340, 0342, 0343, 0350 Starlite 0058, 0179, 0320, 0323, 0349 Stenway 03 48 Stern 0346, 0347 Strato 0320, 032 3 Styl[...]

6 Catron 1030 CGE 1 026, 1027 Cimline 1 008, 1024, 1029 CineV ision 1104 Citizen 1070, 1071 Clatroni c 1008, 1030 Colortyme 106 4 Condor 1 009, 1025, 1030 Craig 107 0, 1071 Crown 1008, 1009, 1025, 1029, 1030 Curtis Mathes 1064, 1068, 1070 Cyberne x 1070 CyberPo wer 10 16 Daewoo 100 9, 1025, 1030, 1038, 1069, 122 3 Dansai 100 8, 1009, 1029 Dantax 10[...]

7 Philips 1006, 1013, 1028, 1035, 1040, 1045, 1046, 1050, 1058, 1059, 1061, 1068, 1076, 1101, 1110, 1113, 1116, 1117, 1122, 1126, 1210, 121 1 Philips Magnav ox 1076 Phonola 10 28 Pilot 1071 Pioneer 1 028, 1036 Polaroid 1088, 1099 Portland 100 9, 1025, 1030 Prinz 1026 Profe x 1029 Proline 1026 Proscan 10 19 Prosonic 1009, 1024 Pulsar 1114 Pye 1028, [...]

8 Californi a Audio La bs 2151 Cambridge Audio 2354 CA T 2 352, 2353 CA VS 2192 Centrum 23 53 CGV 2354, 2362 Changhong 2 140 Cinetec 23 63 CineV ision 2133, 2237 Clatroni c 2358, 2367 Coby 2031, 2046, 2360 Conia 2383 Continen tal Edison 2363 Cro wn 2362 C-T ech 2355 Curtis Mathes 2139 CVG 237 7 CyberHome 2022, 2098, 2138, 2187, 2336 Cytron 2244 Dae[...]

9 2212, 2269, 2272, 2299, 2304, 2305, 2306, 2307, 2308, 2309, 2310, 2311, 2344, 2345, 2347, 2379 Pointer 2362 Polaroid 2125, 2215, 2235 Portland 23 62 Pow erpoint 23 63 Prima 2252 Proceed 2130 Proscan 21 56 Prosonic 2360, 2377 Protron 2202 Provisi on 2358 Pye 2144 Qwestar 214 8 Raite 2380 RCA 2021, 2029, 2104, 2105 , 2131, 2149, 2156, 2157, 2229 Re[...]

10 Pye 2144 Samsung 2000, 2112, 2216 Sansui 2073 Sanyo 22 17 Sony 2004, 2005, 2007, 20 52, 2068, 2069, 2074, 2208, 2210, 221 1 Sylv ania 2239 T oshiba 2032, 2036, 2037, 2039, 2049, 2054, 2055, 2076 Y amaha 2056 Cabl e ABC 3002, 3003, 3017, 3066 , 3067, 3086, 3093, 3119, 3122 ADB 3020 Adelphia 30 81 Alcatel 30 16 Americast 3 124 Amstrad 3022, 30 98 [...]

11 Astro 4004, 4008, 4010, 4015, 4024, 4213, 4218, 4219 AudioT on 4004, 4048 Aurora 4222 Austar 4222 Axiel 4216 Axis 4008, 4009, 40 24, 4050 Best 4008, 4024 Blaupunk t 4015 Blue Sky 421 7 Boca 4011, 4054, 4059, 42 17 Boston 4216 Brain W a ve 4013 Broadcas t 4012 Broco 4217 BSkyB 4 035, 4041 BT 4216 Bubu Sat 4 217 Bush 4006, 4045 Cambridg e 4218 Can[...]

12 Medison 4217 Mega 4 053, 4055 Memorex 4127 Metronic 4001, 4004, 40 05, 4010, 4028, 4031, 4217 Metz 4015 Micro elect ronic 421 7, 4218, 4219 Micro T echnology 4217 MicroGem 4106 Micromaxx 4008, 40 24 Microstar 4008 Microtec 4217 Minerva 4015 Mitsubishi 4006, 40 15, 4202 Mitsumi 4054 Morgan's 4011, 4053, 4054, 4055, 4217 Motorola 4 019, 4088,[...]

V e ga 4024 V entana 4053, 40 55 Vi ew s a t 4 0 9 8 V isiosat 4013, 4048, 4216, 4217 V oom 4019 V ortec 4001 W elltech 4212 W eT eK om 4212, 42 18 We v a s a t 4 0 0 6 W ewa 40 06 W inersat 40 13 W isi 400 6, 4014, 4015, 4218, 4219 W oorisat 4010 W orldsat 4216 Xrypton 4024 XSat 4217 Zehnder 400 8, 4010, 4024, 4209, 4215 Zenith 4102, 4107, 4195 Zo[...]