Yamaha RX-V771 manual

AV Receiver Owner’s Manual English for Europe Be sure to read “Safety Brochure” (su pplied booklet) before using this unit.[...]

En 2 CO N T E N T S What you can do with this unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Part names and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

En 3 Playing back music stored on a USB storage device . . . . . . . . . . . . . . 60 Connecting a USB storage device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Playback of USB storage device content s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

En 4 Information on HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 1 HDMI Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 HDMI signal compatibility . . . . . . . . . . . . . . . .[...]

En 5 Ac cessories Check that the following accessories are supplied with this product. ■ Remote control ■ Batteries (AAA, R03, UM-4) (x 2) ■ YPAO microphone ■ VIDEO AUX input cover Insert into the remote control in the correct polarity (+/-) ■ AM antenna ■ FM antenna ■ CD-ROM (Owner’s Manual) ■ Easy Setup Guide ■ Safety Brochure[...]

En 6 FEA TURES Wha t you can do with this unit Supports 2 to 7.1 (plus presence) channel speaker system. Allows yo u to enjoy fa v orite acoustic spaces in various styles. A utomatically optimizing the speaker settings to suit y our room (YP A O) p.35 Sound field reproductions l ike actual movie theaters and concert halls from stereo or multi-chann[...]

En 7 F ull of useful functions! ● Connect ing various devices (p .26) A number of HDMI jacks and various input/output jacks on this unit allow you to connect video devices su ch as BD/DVD players, audio devi ces such as CD players, game consoles and camcorders, and so on. ● Playing back T V audio in surround sound with a single HDMI cable conne[...]

En 8 Fro nt pa ne l 1 MAIN ZONE T urns on/off (standby) this unit. 2 Standby indicator Lights up when this u nit is in standby mode under any of the following conditions. - HDMI Control is enabled (p.121 ) - The standby through funct ion is enabled (p.95) - The network standby function is enable d (p.96) - The iPod is being charged (p.80) - An iPod[...]

En 9 Fr ont displa y (indicators) 1 HDMI Lights u p when HDMI s ignals are being in put or output . OUT1/OUT2 Indicate the HDMI OUT jacks curr ently outputting an HDMI signal. 2 CINEMA DSP Lights up when CINEMA DSP (p.45) is working. CINEMA DSP Lights up when CINEMA DSP 3D (p.47) is working. 3 ENHANCER Lights up when Compressed Music Enhancer (p.48[...]

En 10 Rear panel 1 DOCK jack For connecting an optional Y amaha pr oducts such as iPod dock (p.54), iPod wireless system (p.54), and Bluetooth receiver (p. 58). 2 NETWORK jac k For connecting to the network (p.30 ). 3 PHONO jacks For connecting a turntable (p.29). 4 ANTENNA jacks For connecting F M and AM antennas ( p.30). 5 HDMI OUT 1~2 jacks For [...]

En 11 Remote con trol 1 Remote control signal transmitt er T ransmits infrared signals. 2 MAIN/ZONE2 Switches the zones (main or Zone2) to opera te with the remote c ontrol (p.70). 3 SOURCE T urns on/off an external device. 4 Input selection keys Select an input sour ce to play back. HDMI1~5 HDMI1~5 jacks V- A U X VIDEO AUX jacks (on the front pane[...]

En 12 SETUP Now all the preparations are complete. Enjoy play ing movies, music, radio, etc. with this unit! General se tup proc edur e 1 Placing speakers (p .13) Select the speaker layo ut depending on the number of speake rs and place the speakers in your room. 2 Connecting speakers (p .17) Connect the speakers to this unit. 3 Connect ing a TV (p[...]

En 13 Select the speaker layout depending on the nu mber of speakers and place the speakers and subwoofer (with built-in amplifier) in your room. This section describes the representative speaker layout examples. • For inf ormation on the ideal speaker lay out, see “Ideal speaker la yout” (p .116). • If you hav e 7 speakers , use two of the[...]

En 14 7.1+2 channel syst em 7.1 channel system (using surr ound back speak ers) 7.1 channel syst em (using pr esence speak ers) 6.1 channel system • The surround back speakers and presence speakers do not produce sounds simultaneously . This unit automatically switches the speakers to be used depending on a selected CINEMA DSP (p.45). 1 Speaker p[...]

En 15 5.1 channel syst em 4.1 channel system 3.1 channel syst em 2.1 channel system 1 Speaker placement 2 3 4 5 6 7 8 9 10[...]

En 16 ■ Setting the speak er impedance This unit is configured for 8-ohm speakers at the factory . When con necting 6-ohm speakers, set the speaker imped ance to “6 Ω MIN”. In this case, you can also use 4- ohm speakers as the front speakers. 1 Before connecting speakers, connect the power cable to an A C wall outlet. 2 While holding down ST[...]

En 17 Connect the speakers placed in your room to the unit. Here are connections of 7.1+2, 7.1 and 6.1 channel system as examples. If you select another system, connect speakers while referring to the connection of 6.1 channel system. Cables necessary for connection (commercially availab le) Speaker ca bles (x the number of speake rs) Audio pin ca [...]

En 18 7.1 channel syst em (using presence speak ers) 6.1 channel syst em When using only one surround back speaker , connect it to the SINGLE jack (L side ). This unit (rear) This unit (rear) 1 2 Speaker connections 3 4 5 6 7 8 9 10[...]

En 19 ■ C onnecting speaker cables Speaker cables have two wires. One is for connecting the negative (-) ter minal of the unit and the speaker , and the other is for the positive (+) ter minal. If the wires are color ed to prevent confusion, con nect the black wire to the negative and the other wire to the positive. a Remove appro ximately 10 mm [...]

En 20 ■ V ideo/audio jacks HDMI jacks T ransmit digital video and digi tal sound through a single jack. Use an HDMI cable. • Use a 19-pin HDMI cable with the HDMI logo. We recommend using a cable less than 5.0 m long to prev ent signal quality degradation. • T o connect a device that has a D VI jack, an HDMI/D VI-D cab le is required. • The[...]

En 21 Connect a TV to this unit so that videos input to this unit can be output to the TV . Y ou can also enjoy playback of TV audio on this unit. The connection method varies depending on f unctions and video input jacks available on your TV . Refer to the instruction manual of the TV and choose a co nnection method. ■ C onnection method 1 (HDMI[...]

En 22 Necessary settings T o use HDMI Control and ARC, you need to configur e the following settings. For details on settings a nd operations of your TV , refer to the instruction manual of the TV . 1 After connecting external devices (TV , pla yback devices, etc.) and power cab le of this unit, t urn on this unit, TV and pla ybac k de vices. 2 Con[...]

En 23 ■ C onnection method 2 (HDMI Control-compatible TV ) Connect the TV to this unit with an HDMI ca ble and a digital optical cable. • The following e xplanation is based on the assumption that you hav e not changed the “HDMI” parameters (p.94) in the “Setup” menu. • HDMI Control is av ailable only on the HDMI OUT 1 jack. • If yo[...]

En 24 3 Configure the settings for HDMI Contr ol. a Enable HDMI Co ntrol on the TV a nd pla yback de vices (HDMI Contr ol-compatib le BD/ D VD play er , etc). b T ur n off th e main po wer of the TV a nd then turn off th is unit and pla ybac k de vice s. c T ur n on th e main po wer of the TV and then turn on this unit and p la ybac k de vices . d [...]

En 25 ■ C onnection method 4 ( TV wit hout HDMI input jacks) Depending on the video input jacks available on your TV , choose one of the following connections. If you select “A V4” as th e input source by pr essing A V4 or SCENE(TV ), the TV audio will be played back on this unit. • If you connect your TV to this unit with a cable other tha[...]

En 26 This unit is equipped wit h a variety of in put jacks including HDM I input jacks to allow you to connect different types of playback devices. For information on how to connect an iPod, a Bluetooth component or a U SB storage device, see the following pages. - Connecting an iPod (p.53) - Connecting a Bluetooth receiver (p.58) - Connecting a U[...]

En 27 ■ S-video connection Connect a video device to this unit with an S-video cable and a ster eo pin cable. If you select the input source by pressing A V5, the video/audio played b ack on the video device will be output from this unit. • When video signals are input through the S VIDEO jack and VIDEO jack of the A V5 jack at the same time, p[...]

En 28 ■ Changing the combinat ion of video/audio input jacks If the combination of video/audio input jacks prepared on this unit does not match your video device, change its combination according to the output jacks of your device. It enables you to connect a video device that has the following video/audio output jacks. Necessary setting For exam[...]

En 29 Connecting audio devic es ( CD pla yers , etc .) Connect audio devices such as CD p layers, MD players and a turntable to this unit. Depending on the audio output jacks availabl e on your audio device, choose one of the following connections. If you select the input source by pressing A V1~6, AUDIO1~2 or PHON O, the audio played back on the a[...]

En 30 Connect the supplied FM/AM antennas to th is unit. Assembling and connectin g the AM antenna • Unwind the antenna cable from the AM antenna unit only the length needed. • The wires of the AM antenna have no polarity . Connect this unit to your router with a comme rcially-available STP network cab le (CA T -5 or higher straight cable). Y o[...]

En 31 • Some security software installed on your PC or the firewall settings of your netw ork devices (such as a router) may b lock the access of this unit to the network devices or the Internet. In such cases, configure the security software or firewall settings appropriately . • Y ou can co nnect this unit to up to 16 music servers (PC , etc.[...]

En 32 Connecting video/audio recording devices Y ou can connect video/audio recording devices to the A V OUT and AUDIO OUT jacks. These jacks output analog vid eo/audio signals selected as the input. • T o cop y video/audio from a video device, connect the video de vice to the A V5~6 jac ks or V -AUX (VIDEO/ A UDIO) jacks of this unit. • T o co[...]

En 33 Co nnecting a device c ompatible with the trigger function The trigger function can control an external d evice in conjunction with operations (power -on/off, input selection, etc.) on this unit. If you have a Y a maha subwoofer that supports a system connection or a device wi th a trig ger input jack, you can use the trigger function by conn[...]

En 34 Select a desired on-screen menu language from English (default), Japanese, French, German, Spanish and Russian. 1 Press RECEIVER to turn on this unit. 2 T urn on the TV and s witc h the TV input to displa y the video from this unit. 3 Press ON SCREEN. 4 Use the cursor keys to select “Setup” and press ENTER. 5 Use the cursor keys ( / ) to [...]

En 35 By using the Y amaha Parametric room Acoustic Optimizer (YP AO) function, this unit automatically detects speaker con nections and distances from the listening posi tion, and optimizes the speaker settings such as volume balance and acoustic parameters to suit your room. Please note the following when using YP AO. • Use YP AO after connecti[...]

En 36 The f ollo wing screen appears on th e TV . • T o cancel the operation, disconnect the YP AO microphone bef ore starting the measurement. 5 If desired, change th e measuring method (multi/ single). a Use the curso r k eys to select “Multi Position” and pres s ENTER. b Use the curs or k eys to select a setting and then press ENTER . Sett[...]

En 37 Measuring a t on e liste ning positio n (single measure) When “Multi Position” is set to “No”, follow the procedure below to make the measurement. • YP A O measurement is not performed correctly when any obstacles are in the room. • During the measurin g process (about 3 minutes), k eep stuff in the corners or remove it from the r[...]

En 38 Measuring at multiple list ening positions (multi measure) When “Multi Position” is set to “Y es”, follow the procedure below to make the measurement. • YP A O measurement is not performed correctly when any obstacles are in the room. • During the measurin g process, k eep stuff in the corners or remove it from the room. It takes [...]

En 39 Checking the meas urement r esults Y ou can check the YP AO me asur ement results. 1 After the measurement, use the cursor keys to select “Result” and press ENTER. • Y ou can also select “Result” from “Auto Setup” (p .87) in the “Setup” menu. In this case, the previous measurement results are displa yed. The f ollo wing scre[...]

En 40 Error messages If any error message is displayed during the meas urement, resolve the problem and perform Y P AO again. Error m essage Cause Remedy E-1: No Front SP Front speakers are n ot detected. Follow the on-scr een instructions to exit YP AO, turn off this unit, and then chec k the speaker connections. E-2: No Sur . SP Either of surroun[...]

En 41 W arni ng messages Even if any war ning message is displayed after the measuremen t, you can save the measur ement results by following on-scr een ins tructions. However , we recommend you perform Y P AO again to use this unit with the optimal speaker settings. W arning m essage Cause Remedy W-1: Out of Ph ase Any of the speaker cables may be[...]

En 42 PLA Y BA CK 1 T urn on extern al devi ces (TV , BD/D VD play er , etc.) connected to this unit. 2 Use the input selection keys to select an input sour ce. 3 Start playback on the external de vice, or sele ct a radio station. Refer to the instruc tion manual of the extern al de vice. Fo r details o n the f ollo wing op erations , see th e corr[...]

En 43 The SCENE function allows you to select the assigned input sour ce, sound program, Compressed Music Enhancer on/off, and HDMI output jack at once. 1 Press SCENE. The input source and settings registered t o the corresponding scene are selected. This unit t urns on automatically when it is in standb y mode. By default, the following settings a[...]

En 44 This unit is equipped with a variety of sound programs and surround decoders that allow you to enjoy pla yback sour ces with a favorite sound mode (sound field effect, stereo playback, etc). Selecting a sound program suitable for movies (p.45) Press MOVIE repeatedly . Selecting a sound program suitable for music or stereo playback (p.46) Pres[...]

En 45 Enjoying sound field eff ects (CINEMA DSP) This unit is equipped wit h a variety of sound programs that utilize Y amaha's original DSP technology (CINEMA DSP). It allows you to easily create sound fields like actual movie theaters or concer t halls in your r oom. • When you pla y back DTS-HD sources, the DTS decoder is automatically se[...]

En 46 ■ Sound pr ograms suitable f o r music/stereo play back (MUSIC) The following sound programs are optimize d for listening to music sources such as music CDs. Y ou can also select stereo playback. ❑ CLASSICAL ❑ LIVE/CL UB ❑ STEREO Hall in Mun ich This program simulates a concert hall with approximately 250 0 seats in Munich, using styl[...]

En 47 ■ Enjoying stereoscopic sound fields ( CINEMA DSP 3D ) CINEMA DSP 3D enables to create a natural stereoscopic sound field in your r oom. CINEMA DSP 3D functions when both of the following condition s are met. - One of the sound programs (except 2ch Ster eo and 7ch Stereo) is selected (p.45). - “CINEMA DSP 3D MODE” (p.77) in the “Optio[...]

En 48 • Y ou ca nnot select the Dolby Pro Logic IIx decoders when headphones are connected or when “Surround Back” in the “Setup” menu is set to “None”. Enjoying pur e high fidelity sound (Pure Direc t) When the Pure Direct mode is enabled, this unit plays back the selected source with the least ci rcuitry to reduce the electrical noi[...]

En 49 Y ou can tune into a radio station by specifying its fr equency or selecting from register ed radio stations. • If you cannot hav e a good reception on the radio , adjust the direction of the FM/ AM antennas. Selecting a frequency for rece ption 1 Press TUNER to select “TUNER” as the input sour ce. 2 Press FM or AM to select a band. 3 U[...]

En 50 ■ Selec ting a preset station T une into a registered radio station by selecting the preset number . 1 Press TUNER to select “TUNER” as the input sour ce. 2 Press PRESET repeatedly to select a desired radio station. Y ou can also enter a prese t number (01 to 40) direct ly by using the numeric k eys af ter pressing PRESET once . • “[...]

En 51 • “Program Service”, “Program T ype”, “Radio T ext” and “Cloc k Time” do not appear when the radio station does not provide the Radio Data System service. ■ Receiving tr affic information automatically When “TUNER” is selected as the input source, this unit automatically receives traf fic inform ation. T o enable this [...]

En 52 ■ Browse screen 1 Preset station list Displays the list of prese t stations. Use the curso r keys to select a preset station and press ENT ER to tune into it. 2 Preset number 3 Operation men u Use the cursor keys to select an item and pr ess ENTER to confirm the selection. T o close the submenu, pr ess RETURN. Menu Submenu Function Manual T[...]

En 53 Y ou can play back iPod music/videos on this unit using a USB cable supplied with iPod, an optional Y amaha iPod dock (such as YDS- 12) or an optional Y amaha iPod wireless system (YID-W10). • This manual describes both the “iPod” and “iPhone” as the “iP od”. “iP od” means both “iP od” and “iPhone” unless the explana[...]

En 54 ■ Using an iP od dock Refer to the instruction manual of the iPod dock in addition. 1 When this unit is in standb y mode , co nnect the iP od dock to the DOCK jac k. Locate the iP od dock a t the distance as f ar as from th is unit. 2 Connect your iPod to the iP od dock and turn on this unit. • While an iPod is connected to the iP od d oc[...]

En 55 Playback of iP od conten ts When using a USB cable or an iP od dock, you can control the iPod with the menu displayed on the TV . • When using an iPod wireless system, y ou cannot control the iP od from the TV screen. Operate your iP od itself to select the content and star t pla yback. 1 When using a USB cable: press USB to select “USB?[...]

En 56 ■ Playback scr een 1 Status indicators Display the current sh uffle/r epeat se ttings (p. 57) and playback st atus (play/pause, etc). 2 Playback inf ormation Displays the artist name, album name, song title and elapsed/remai ning time. Use the cursor keys to select information to be scrolled. 3 Album image 4 Operation menu Use the cursor ke[...]

En 57 ■ Shuffle/repeat settings Y ou can configure the shuffle/r epeat settings of your iPod. • When using an iPod wireless system, configure the shuffle/repeat settings directly on your iP od. • During simple play , configure the shuffle/repeat settings directly on your iPod, or press MODE to display the TV menu screen and then f ollow the p[...]

En 58 Y ou can play back music stored on a Bluetooth component on this unit using a Y amaha Bluetooth wireless audio receiver (such as YBA-10, optional). Refer to the instruction manuals of the Bluetooth receiver and your Bluetooth component in addition. This unit supports A2DP (Ad vanced Audio Distribution Profile) of the Bluetooth profile. • Wh[...]

En 59 4 Select the Bluetooth receiver fr om the device list and enter the pass key “0000”. “Completed” appears when the pai ring is complete. • Depending on Bluetooth components, “BT connected” appears when the pairing is complete. In this case, the wireless connection has been already established. Y ou just need to star t pla yback o[...]

En 60 Y ou can play back music files stored on a USB storage device on this unit. Refer to the instruction manuals of the USB storage device in addition. This unit supports USB mass storag e class devices (F A T 16 or F A T 32 format, except USB HD Ds). • This unit suppor ts playbac k of W A V (PCM format only), MP3, WMA, MPEG-4 AA C and FLAC fil[...]

En 61 ■ Brow se screen 1 Status indicators Display the current sh uffle/r epeat se ttings (p. 62) and playback st atus. 2 List name 3 Contents list Displays the list of USB storage device contents. Use the cursor keys to select an item and press ENTER to confi rm the selection. 4 Item number/total 5 Operation menu Use the cursor keys to select an[...]

En 62 ■ Shuffle/repeat settings Y ou can configure the shuffle/r epeat settings for playback of USB storage device contents. • The shuffle/repeat settings are shared by USB and network sources. 1 When “USB” is selected as the input sour ce, press OPTION. 2 Use the cursor keys to sele ct “Shuffle” (Shuffle) or “Repeat” (Repeat) and p[...]

En 63 Y ou can play back music files stored on your PC or DLNA- compatible NAS on this unit. • T o use this function, this unit and your PC must be connected to the network properly (p.30). Y ou can check whether the network parameters (IP address, etc.) are properly assigned to this unit in “Networ k” (p .100) in the “Inf ormation”. • [...]

En 64 3 Use the cursor keys to select an item and press ENTER. If a song is selecte d, pla ybac k starts and the pla yback screen is displa yed. • T o return to the previous screen, press RETURN. • Files not suppor ted by this unit are not listed (or cannot be selected ev en if listed). • Y ou can register y our fa vorite items as shortcuts ([...]

En 65 • Y ou can also use the e xternal device operation k eys ( , , , , ) on the remote control to control playback. • Y ou can also use a DLNA-compatible Digital Media Controller (DMC) to control playbac k. For details , see “DMC Control” (p.81). ■ Shuffle/repeat settings Y ou can configure the shuffle/r epeat settings for playback of P[...]

En 66 Y ou can listen to Internet radio sta tions using the vT uner Internet radio station database service par t icularly customized for this unit, providing a database of numerous radio stations in the world. • T o use this function, this unit must be connected to the Inter net (p .30). Y ou can check whether the network parameters (IP address,[...]

En 67 • By adding your fa v orite Inter net radio stations to “Bookmark”, you can access to them quickly from “Bookmark”. T o remove stations from “Bookmark”, select the station in “Bookmark” and then “Bookmar k Off ”. • Y ou ca n also register y our fa vorite Internet radio stations by accessing the following w ebsite with [...]

En 68 The multi-zone function allows you to play back separate input sources in the room wher e this unit is installed (main zone) and another room (Zone2). For example, while you are watching a TV in the living room (main zone), another person can listen to radio in the bedroom (Zone2). • Only analog audio signals (including radio, USB and netwo[...]

En 69 ■ Using an e xternal amplifier Connect the external amplifier placed in Zone2 t o this unit with a stereo pin cable. ■ Opera ting this unit from Z one2 (remote connection) By connecting an infrared signal receiver/emitter to the REMOTE IN/OUT jacks of this unit, you can operate this unit and exter nal devices from Zone2 with the supplied [...]

En 70 Remote c onnections between Y amaha products If you are using Y amaha pr oducts that support remote connections like this unit, an infrared signal transmitter is unnecessary . Y ou can transmit remote contr ol signals by connecting the REMOTE IN/OUT jacks with monaural mini-jack ca bles and an infrared signal receiver . Co nt ro ll in g Zo ne[...]

En 71 • The on-screen operations are not availab le for Zone2. Use the front displa y or web control (p.73) to control Zone2. • T o set the sleep timer (120 min, 90 min, 60 min, 30 min, off), press SLEEP repeatedly . The Zone2 output will be disabled after a specified per iod of time. • T o adjust the Zone2 volume, press V OLUME or MUTE (av a[...]

En 72 Registering fav orite items (shortcut) Y ou can register up to 40 favorite USB and network contents as shortcuts and access them dir ectly by selecting the shortcut numbers. • Y ou ca n also use the “Bookmark” feature to register Internet radio stations (p.66). ■ Registering an item Select a desired item and register it to a shortcut [...]

En 73 C ontrolling this unit from the w eb bro wser (web c ontrol) Y ou can control this unit with the web control scr een displayed in the web browser . • T o use this function, this unit a nd y our PC must be connected to the netw ork properly (p.30). • Some security software installed on your PC may bloc k the access of this unit to your PC.[...]

En 74 ■ Control screen 1 PLA Y INFO Selects an input source or co ntrols playback for the sel ected zone. 2 TO P M E N U Moves to the top menu screen. 3 SCENE Select a scene for the main zo ne. 4 PO WER T urns on/off the power for the selected zone. 5 VO L U M E Adjusts the volume or mutes the audio output for the select ed zone. Y ou can also sw[...]

En 75 V iewing the current status ■ Switching inf ormation on the front display 1 Press INFO . Each time y ou press the k ey , the displa y item s witches . About 3 seconds later , the corresponding inf ormation appears. • Av ailable items v ary depending on the selected input so urce . Also , the display item can be applied separately to each [...]

En 76 Y ou can configure the playback-related setti ngs in accor dance with a playback source. Since this menu is operational on the front panel (or on the TV screen), you can easily configure the settings during playback. 1 Press OPTION. Front display TV screen 2 Use the cursor keys to select an item and press ENTER. • T o return to the previous[...]

En 77 ■ T o n e Co nt rol ( T on e Co nt ro l) Adjusts the high-frequency range (T reble) and low-frequency range (Bass) of speaker sounds. When connecting headphon es, you can adjust high-frequency range and low- frequency range of sounds output from headphones. Choices T reble (T reble), Bass (Bass) Setting range -6.0db ~ Bypass (Bypass) ~ +6.0[...]

En 78 ■ Extended Surround (EXTD Surround) Selects how to play back 5.1- to 7. 1-channel sources when su rround back speakers are used. Settings ■ V olume T rim ( V olume T rim) Corrects volume differ ences between input sources. If you are bothered by volume differences when switching between input s ources, use this function to correct it. •[...]

En 79 C ONFIGURA TIONS Y ou can change the input source settings using the TV screen. 1 Press ON SCREEN. 2 Use the cursor keys to select “Input” and press ENTER. 3 Use the cur sor ke ys ( / ) to select an input sour ce to be configured and press the cursor key ( ). The input source of thi s unit also changes . • Y ou can still s witch the inp[...]

En 80 ■ Rename/Ic on Selec t Changes the input source name and icon displayed on the front display or TV screen. Input sources HDMI1~5, A V1~6, V -AUX, AUDIO1~ 2, PHONO, USB, DOCK ■ Setup procedure 1 Use the cursor keys ( / ) to sele ct an icon and press the cursor key ( ). 2 Press ENTER, use th e cur sor keys to rename, and then press ENTER ag[...]

En 81 ■ iP od Interlock Selects whether to control this unit in conjunction with operations of the iP od connected to the iPod wireless system. Input sources DOCK (iPod) • This function is availab le only when an iP od wireless system is connected to this unit. ❑ Powe r & In pu t Selects whether to control the power and input source selec[...]

En 82 Y ou can change the settings of the SCENE function (p.43 ) using the TV screen. 1 Press ON SCREEN. 2 Use the cursor keys to sel ect “Scene” and press ENTER. 3 Use the cursor ke ys ( / ) to select a scene to be config ured and press the cursor key ( ). • Y ou can still s witch the scene by using cursor ke ys ( / ) after ste p 3. 4 Use th[...]

En 83 Defau lt SCENE1 (BD/DVD), SCENE2 (TV): HDMI Control SCENE3 (CD): IR: Y am aha CD SCENE4 (RADIO): Off • T o control playbac k of an HDMI Control-compatible device b y SCENE link playbac k, you need to set “HDMI Control” in the “Setup” menu to “On” and perform the HDMI Control link setup (p.121). ❑ Detail Displays the assignment[...]

En 84 Y ou can change the settings of the sound programs and surround decoders using the TV screen. 1 Press ON SCREEN. 2 Use the cursor keys to select “S ound Program” and pres s ENTER. 3 Use the cursor keys ( / ) to select a sound program to be configured and press the cursor ke y ( ). • Y ou can still s witch the sound program by using curs[...]

En 85 The following items are available when y ou select “2ch Stereo” or “7ch Stereo”. • Av ailable items in “7ch Stereo” v ary depending on the speaker system being used. ■ Settings for decoders The following items are available when you set “Decode T ype” of “Surround Decoder” to “PLIIx Music” or “Neo:6 Music”. Sur[...]

En 86 Y ou can configure the various functions of this unit using the TV screen. 1 Press ON SCREEN. 2 Use the cursor keys to select “Setup” and press ENTER. 3 Use the cursor keys ( / ) to select a menu. 4 Use the cursor keys (/) to select an item and press ENTER. • T o return to the previous screen during menu operations, press RETURN. 5 Use [...]

En 87 Setu p me nu it e ms Menu Item Function Pag e Speaker Auto Setup Optimizes th e speaker setting s automatically (Y P AO). 35 Manual Setup P ower Amp Assign Selects a speaker system. 89 Configuration Front Selects the size of the fro nt speakers. 89 Cente r Selects whether or not a center speaker is connected and i ts size. 89 Surround Selects[...]

En 88 Multi Zone Zone2 Set Max V olume Sets the Zone2 maximum volume so that sound is not too loud. 96 Initial V olum e Sets the Zone2 initial volume for when this unit is turned on. 96 Party Mode Set Enables/disables switching to the party mode. 97 Zone Rename Changes the zone n ames displayed on the TV scr een. 97 Function Auto P ower Down Sets t[...]

En 89 Speaker (Manual Setup ) Configures the speaker settings manually . ■ P ower Amp Assign Selects a speaker system. In addition to the 5.1- or 7.1-channel sp eak er system, various sp eaker configurations are possible using the presence speaker s, Zone2 speakers or bi-amp connection. Settings ■ C onfigura tion Configures the output character[...]

En 90 ❑ Surround Back Selects whether or not surround back speakers are connected and its size. Settings ❑ F ront P resence Selects whether or not presence speakers are connected. Settings ❑ Subw oofer Selects whether or not subwoofer is connected and its phase. Settings • When the bass sound is lacking or unclear , switch the subwoof er ph[...]

En 91 ■ Level Adjusts the volume of each speaker . Choices Front L, Fr ont R, Center , Surr ound L, Surro und R, Surround Back L, Surround Back R, Fr ont Presence L, Fr ont Presen ce R, Subwoofer Setting range -10.0dB ~ +10.0dB (0.5dB steps) Defau lt 0.0dB ■ Para met ri c EQ Adjusts sound quality of tone with an equalizer . ❑ PEQ Select Selec[...]

En 92 Sou nd Configures the audio output settings. ■ Lipsync Adjusts the delay between video and audio output. ❑ Auto Adjusts the delay between video and audio output automatically when a TV that supports an automatic lipsync function is con nected to this unit via HDMI. If necessary , you can fine-adjust the audio output ti ming. “Offset” [...]

En 93 Vi de o Configures the video output settings. ■ Analog to Ana log Con version Enables/disables the video conve rsion (p .120) between the analog video jacks (COMPONENT VID EO, S VIDEO and VIDEO). Settings • This unit does not convert 480-line and 576-line video signals interchangeably . • 480p/576p-, 1080i- and 720p-resolution video sig[...]

En 94 HDMI Configures the settings related to HDMI. ■ HDMI C ontrol Enables/disables HDMI Control (p.121). Settings • T o use HDMI control, you need to perf orm the HDMI Control link setup (p.121) after connecting HDMI Control-compatible devices . ❑ TV Audio Input Selects an audio input jack of this unit to be used for TV audio input when “[...]

En 95 ■ Aud io O ut pu t Selects a device to output audio. • The “Amp” a nd “HDMI OUT1” settings are av ailab le only when “HDMI Control” is set to “Off ”. ❑ Amp Enables/disables the audio output from the speakers connected to this unit. Settings ❑ HDMI OUT1, HDMI OUT2 Enables/disables the audio output from a TV connected to[...]

En 96 ■ Netw ork Standby Selects whether to tur n on this unit by the command from other network devices (network standby). Settings ■ MA C Address F ilter Sets the MAC address filter to limit acces s to this unit from other network devices. ❑ Mode Enables/disables the MAC address filter . Settings ❑ A ddress Setup Specifies the MAC address[...]

En 97 ■ P art y Mode Set Enables/disables switching to the par ty mode (p.71). Choice T arget: Zone 2 Settings ■ Zo ne Rename Changes the zone names displayed on the TV screen. ■ Setup procedure 1 Use the cursor keys to sele ct a zone to be renamed and pr ess ENTER. 2 Press ENTER, use th e cur sor keys to rename, and then press ENTER again. 3[...]

En 98 Settings ❑ Short Me ssage Selects whether to display shor t messages on the TV scr een when this unit is operated (input selection, volume adjustment, etc ). Settings ❑ W all Paper Selects a wall paper displayed on the TV . Settings ■ Tr i g g e r O u t p u t Sets the TRIGGER OUT jack to funct ion synchr onized with power status of each[...]

En 99 Language Select an on-screen menu language. Settings • The information on the front display is provided in English only . Y ou can view informatio n about this unit using the TV screen. 1 Press ON SCREEN. 2 Use the cursor keys to select “Information” and press ENTER. 3 Use the cursor keys ( / ) to select an information type. 4 T o exit [...]

En 100 T ypes of information ■ A udio Signal Displays information about the current audio signal. • Even when this unit is set to output bitstream signals directly , the signal may be conv erted depen ding on the specifications and settings of the playback de vice. ■ V i deo Signal Displays information about the current video signal. ■ HDMI[...]

En 101 Y ou can configure the system settings of this unit using the front display . 1 Set this unit to standby mode. 2 While holding down STRAIGHT on the font panel, press MA IN ZONE . 3 Press PROGRAM to select an item. 4 Press STRAIGHT to select a setting. 5 Press MAIN ZONE to set this unit to standb y mode and turn it on again. The new sett ings[...]

En 102 1 Press CODE SET on th e remote control using a pointed object such as the tip of a ballpoint pe n. 2 Press SOURCE/RECEIVER . 3 Use the numeric keys to ent er “5019” (ID1) or “5020 ” (ID2). Once the remote control ID is register ed successfully , SOURCE/RECEIVER blinks twic e. If it bl inks 6 time s, re gistra tion f ailed. Repeat fr[...]

En 103 Updating the firm ware (UPD A TE) New firmware will be releas ed irregularly for the purpose o f additional featur es or product improvements. It can be downloaded from our website. If this unit is connected to the Internet, you can download the firmware via the network. For details, refer to the information supplied w ith updates. ■ F irm[...]

En 104 By setting the code for external devices (BD/ DVD players, etc.), you can operate it with the remote control of this unit. • Y ou ca nnot control an e xternal device that does not hav e a remote control sensor . • Make sure the remote control ID of the external device is set to “ID1”. If any other ID is selected, the remote control o[...]

En 105 Setting the remote control c odes for playback devic es By setting the remote control codes for your playback devices, you can operate those devices with the remote control of this unit. Since the codes are assigned to each input source key , you can select the input source and device to control with the remote contr ol concurrently . • At[...]

En 106 Progr amming from other remote con trols (learning) The remote control of this unit can r eceive remote control signals from other r emote controls and learn the remote contr ol operation. If you cannot find a remote control code for your playback device or if any key on the remote control does not work after you set the remote contr ol code[...]

En 107 Resetting remote control c odes ■ Resetting all remote c ontrol c odes Y ou can clear all remote control codes (including functions learned from other r emote controls) and r estore the default settings. • The settings f or controlling playbac k devices after selecting a scene (p .43) will be also cleared. 1 Press CODE SET using a pointe[...]

En 108 If this unit is connecte d to the Internet, the corresponding message will be displayed on the TV when a newer firm war e is available. In this case, follow the procedure below to update the firmware of this unit. • Y ou ca n also update the firmware using the USB memor y de vice from the “AD V ANCED SETUP” menu (p.103). If the followi[...]

En 109 APPENDIX The new spea ker sy stem does not pr ovide an ideal sound balance ... If you have changed sp eakers or speaker s ystem, use “Auto Setup” to optimize the speaker settings again (p .35). If you want to adjust the speaker settings manually , use “Manual Setup” in the “Setup” menu (p.89). Since w e hav e small children, w e [...]

En 110 Refer to the table below when this unit does no t function pr operly . If the problem you are experiencing is not listed below , or if the instructions below do not help, tur n off this unit, disconnect the power cable, and contact the nearest authorized Y amaha dealer or service center . First , check the follo wings: a The power cables of [...]

En 111 Aud io Problem Cause Remed y No sound. Another input source is select ed. Select an appropriate inpu t source with the input selection keys Signals that this unit cannot repr oduce ar e being input. Some digital audio formats cannot be played back on this unit. T o check the audio format of the input signal, use “Audio Signal” in the “[...]

En 112 Vi de o No sound fr om the TV (w hen HDMI Control is used). (If the TV is connected to this unit with an audio cabl e) The TV audio input setting does not match the actual connection. Use “TV Audio Input” in the “Setup” menu to selec t the correct audio input jack (p.94). (If you are trying to use ARC) ARC is disabled on this unit or[...]

En 113 FM/AM r adio USB and netw ork Problem Cause Remed y FM radio reception is weak or noisy . There is multi-path int erference. Adjust the FM antenna height or orientation , or place it in a differ ent location. Y our area is too far fr om the FM station transmitte r . Press MODE to sel ect monaural F M radio rece ption (p.49). Use an outdoor F[...]

En 114 Remote control The files i n the PC cannot be view ed or pla yed bac k. The files are not supported by this unit or the media server . Use the file format supported by both this unit and t he media server . For infor mation about t he file form ats suppor ted by this unit, see “Pla ying back music stored o n PCs” (p.63). The Internet rad[...]

En 115 Error indications on the front displa y Messag e (alphabetic al or der) Cause Remed y Access denied Access to the PC is denied. Configure t he sharing setting and se lect this unit as a device to which musi c contents ar e shared (p .63). Access err or This unit cannot access the USB device. T urn of f this uni t and re c onnect your USB dev[...]

En 116 Use this diagram as guide. Y ou do not need to adjust the speaker layout to the following diagram exactly . Ideal speaker la y out 60° 60° 80° 80° 30 cm or more 0.5 to 1 m 1.8 m 0.5 to 1 m 1.8 m Turn it slightly inward to reduce wall reflections. Turn it slightly inward to reduce wall refle ctions. Front spea ker (L) Front spea ker (R) C[...]

En 117 Aud io i nfor mati on Audio and video synchr onization (Lipsync) Lip sync, an abbreviati on for lip synchronization, i s a technical term that involves both a problem, and the capabilit y of maintaining audio and video signals synchroni zed during post-production and trans mission. Whereas the audio and video l atency requires complex end-us[...]

En 118 DTS Digital Surround DTS Digital Su rround w as developed to replace t he analog soundtracks of movies wit h a 5.1-channel digital s ound track, and is now rapidly gaining populari ty in movie theaters around the world. DTS, I nc. has developed a home theater system so that you can enjoy the depth of sound and nat ural spatial representation[...]

En 119 Vi de o i n fo rm a ti o n Component video signal With the component vi deo signal system, the vi deo signal is separated into the Y signal for luminance and the Pb and Pr signals f or chrominance. Color can be reproduced more faithfully with thi s system because each of these sign als is independent. The component signal is also called t he[...]

En 120 Vi de o s i gn a l f l ow Video signals input from a video device to this unit are output to a TV as shown below . (solid line) is always av ailable. (dotted line) is available only when “Analo g to Analog Co nversion” (p.93) in the “Setup” menu is set to “On” (default). ■ V ideo con v ersion table • Y ou can select a resolut[...]

En 121 HDMI C ontrol HDMI Control allows you to operate exter nal devices via HDMI. If you connect a TV that supports HDMI Control to this unit with an HDMI cable, you can contr ol this unit (power , volume, etc.) in conjunction with TV remo te control operations. Y ou can also control playback devices (HDMI Control-compatible BD/DVD players, etc.)[...]

En 122 HDMI signal c ompa tibility Audio signals Vid e o si gn al s This unit is compatible with the vide o signals of the following resolutions: - 480i/60 Hz - 720p/60 Hz, 50 Hz - 576i/50 Hz - 1080i/60 Hz, 50 Hz - 480p/60 Hz - 1080p/60 Hz, 50 Hz, 24 Hz - 576p/50 Hz • When CPPM copy-protected D VD-Audio is pla yed bac k, video/audio signals ma y [...]

En 123 Refer ence diagr am (rear panel) COMPONENT VIDEO VIDEO +12V 0.1A MAX. TRIGGER OUT DOCK NETWORK PHONO GND S VIDEO FM AM 75Ω ANTENNA P R P B Y P R P B Y AUDIO 2 AUDIO 1 AV 6 AV 5 AV 4 AV 3 ( CD )( TV ) VIDEO AV 2 AV 1 COAXIAL OPTICAL COAXIAL OPTICAL AV OUT COMPONENT VIDEO R L R L HDMI OUT ARC 12 HDMI 1 (BD/DVD) HDMI 2 HDMI 3 HDMI 4 HDMI 5 MON[...]

En 124 Manufactured under license from Dolby Laboratori es. Dolby , Pro Logic and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent #’ s: 5,451,942; 5,956, 674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7, 392,195; 7,272,567 & other U.S. and worldwide patent s issued[...]

En 125 Input jacks • Analog Audio Audio x 6 (A V5~ 6, AUDIO1~2, PHONO, V -AUX) • Digital Audio (Suppor t fs: 32 kHz to 96 kHz) Optical x 2 (A V1, A V4) Coaxial x 2 (A V2, A V3) •V i d e o Composite x 5 (A V3~6, V -AUX) S-Video x 1 (A V5) [U.K. and Europe models] Component x 2 (A V1~2) • HDMI Input HDMI (Front Panel) x 1 (V -AUX) HDMI (Rear [...]

En 126 Aud io S ect ion • Rated Output Power (20 Hz to 20 kHz, 0.09% THD, 8 Ω ) Front L/R .. .................. ..................... .................. ...... 95 W+95 W (1 kHz, 0.9% THD, 8 Ω ) Front L/R ..... ......... .......... ........ .......... 130 W/ch (110 W+1 10 W) Center .......... ........ .......... .......... ......... ........ ...[...]

En 127 • Standby Power Consumption HDMI Control Off / Standby Thr ough Off ... ........... 0.1 W or less HDMI Control On/Stand by Through On (T ypical ) ............ 2.0 W Network Stan dby On (T ypical) ............. ..................... ....... 2.0 W • Maximum Power Consumption [Asia and Gener al models]............ ............... ..........[...]

© 2011 Y a m a h a Corpor a tion YD454A0/OMEN1[...]