Zanussi ZDT 6253 manual

DISHW ASHER ZDT 6253 INST R UCTION BOOK 152975 52/0 UK COP04[...]

In this fully integrated appliance the controls are located on the top of the door . When selecting a programme, the door needs to be open. 1. On/Off push button 2. Half load push button This option is very useful and economical when only a few dishes need washing. Load crockery and cutlery only in the lower basket. 3. Salt indicator light See Inst[...]

3 * T esting programme for EN 50242 (see "Hints for T est Centres). ** This is a special programme for quick washing a full load of lightly soiled dishes, glasses and crockery (except pots) so that you may re-use them promptly W ashing programmes Programme T ype of load and degree of soil Required push buttons Any . Partial load (to be complet[...]

1. Check the filters Ensure they are clean and properly positioned (see "Maintenance and cleaning"). 2. Press the On/Off push button The On/Off indicator light comes on. 3. Check that there is rinse aid and salt 4. Load the dishes Remove any scraps of food. Pull the lower basket out and arrange the saucepans, plates and cutlery in it. Pul[...]

Loading your appliance Before placing dishes in the machine, remove any scraps of food, to avoid clogging the filters and consequently reducing the performance. Do not load very small items which can fall through the baskets. Open the door and slide out the baskets to load the dishes. The lower basket The lower basket is designed to take saucepans,[...]

6 Hints for test centres Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser . T est standard EN 50242 Reference programme: BIO 50°c Load: 12 standard place settings Rinse aid selector: position 5 Detergent dosage : 25 g in the dispenser 5 g on the dispenser lid Arrang[...]

7 In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Service Force Centre by telephoning: 08705 929929 Y our telephone call will be automatically routed to the Service Force centre covering your post code area. For the address of your local Service Force Centre and further information [...]

From the Electrolux Group. The world’ s No.1 choice. The Electrolux Group is the world’ s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. 14 billion U[...]

1 Instruction Book - Before use - Maintenance - Installation Contents Before use 2 Setting the water softener 2 Filling with salt 2 Filling with rinse aid and adjusting the dose 3 Use of detergent 3 Hints and tips 4 Maintenance and cleaning 5 Internal cleaning 5 Cleaning the filters 5 External cleaning 5 Prolonged periods of non-operation 5 Frost p[...]

Before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with salt 5. Fill the rinse aid dispenser . 6. Run a "Rinse a[...]

Rinse aid Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser , which is positioned inside the door , holds about 1 10 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting. Filling with rinse aid 1. Open the container [...]

4 T o save energy Place dishes in the machine immediately after every meal and wait until the dishwasher is full before washing. If necessary run the Rinse and Hold programme (see "W ashing Programmes" chart) so that any food scraps do not become caked on the dishes while you are waiting to run the complete wash programme. Do not prewash [...]

Internal cleaning Ensure that the seals around the door , the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend the use of Finish Dishwasher Cleaner every 3 months or run a 65°C wash without dishes using detergent. Regular use of Finish Dishwasher Cleaner cleans inaccessible parts, eliminates unpleasant food [...]

Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an enginee r. The dishwasher is fitted with a number of alarm systems which can help you to quickly determine the cause of any problems. In the case of alarm intervention the dishwasher will not start or stops during operation, all p[...]

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap[...]

2 01/02 152981 51/2 This appliance complies with the following E.E.C. Directives: - 73/23 or 19.2.73 (Low V oltage Directive) and subsequent modifications; - 89/336 or 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.[...]