Zanussi ZHC 935 manual

COOKER HOOD ZHC 935 INSTRUCTION BOOKLET[...]

2 Customer Care Department Zanussi 55 - 77 High Street Slough Berkshire SL1 1DZ T el: 08705 727 727 T o register ownership, please ensure you complete and return the guarantee card sup- plied with the appliance. Thank you for buying a Zanussi product. T o enable you to use your appliance ef fectively and safely , please read this instruction book c[...]

3 These warnings are provided in the interests of safety . Ensure that you understand them all be- fore installing or using this appliance. Y our safety is of paramount importance. If you are unsure about any of the meanings of these warnings contact the Customer Care Department. • Installation • Any installation work must be undertaken by a qu[...]

4 YOUR APPLIANCE This cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam. Cooker Hood Controls The cooker hood functions are controlled by five push button switches located centrally in the control fascia. L Push to switch ON the worktop lighting. S Red neon indicates the fan motor is switched ON. V1 Pu[...]

5 T o Operate Select the required fan speed and light if required. The appliance can be installed to recirculate or extract contaminated air . The cooker hood is more effective when used in the extraction mode. Recirculation The cooker hood is supplied specified for use in the recirculation mode with the charcoal filter fitted. The contaminated air[...]

6 Before carrying out any maintenance or cleaning isolate the cooker hood from the mains supply . The cooker hood must be kept clean, as a build up of grease or fat can be a fire hazard. External Cleaning The metal casing, visor and chimney should be cleaned at least once a month to keep the hood looking like new . Wipe over the hood with a soft cl[...]

7 MAINTENANCE AND CLEANING Charcoal Filter The charcoal filter cannot be cleaned or regenerated, it should be replaced approximately every three months or more frequently if the hood is used for more than three hours per day . T o Remove the Charcoal Filter Remove the metal grease filter . Release the fixing hooks and remove the charcoal filter fro[...]

8 If, having followed these instructions carefully , your cooker hood fails to work properly please carry out the following checks. SOMETHING NOT WORKING Symptom The cooker hood will not start • Check the hood is connected to the electricity supply . • Make sure the switch is in the ‘ON’ position. • The fan speed is set high enough for th[...]

9 GUARANTEE CONDITIONS We, Zanussi, undertake that if within twenty four months of the date of the purchase this Zanussi built-in product or any part thereof is proved to be defective by reason only of faulty workmanship or materials, the company will, at our option repair or replace the same FREE OF ANY CHARGE for labour, materials or carriage on [...]

10 INST ALLA TION INSTRUCTIONS It is dangerous to alter the specifications or attempt to modify this product in any way . T echnical information DIMENSIONS HEIGHT OF CANOPY : 73mm HEIGHT OF CHIMNEY : (UPPER SECTION) 215mm (LOWER SECTION) 740mm WIDTH OF CANOPY : 898mm DEPTH OF CANOPY : 500mm WEIGHT : (GROSS) 24.00kg WEIGHT : (NET) 19.40kg ELECTRICAL[...]

11 Please ensure that when the appliance is installed it is easily accessible to an engineer in the event of a breakdown. All installations must comply with the local authorities requirements for the discharge of exhaust air . Incorrect installation may affect the safety of this cooker hood. Installation Requirements Before installation check that [...]

12 Clearance Heights The cooker hood is designed to be fitted over a cooking appliance at the clearance heights stated, providing the maximum output of the appliance beneath does not exceed the maximums quoted in the T echnical Specifications. If the output of the appliance below the cooker hood exceeds the maximum outputs quoted, please refer to t[...]

13 Fitting the W all Brackets Draw a vertical line on the wall from the centre of the cooking appliance up to the ceiling, or as high as the adjoing wall cabinets using a spirit level and marker pen. This is to ensure the correct vertical alignment of the appliance. - Draw a horizontal line 965mm above the hob - Place bracket item 7.2.1 on the wall[...]

15 Ducting the Cooker Hood When installing the cooker hood in the ducting mode, connect the hood using either Ø150 or 120mm flexi ble or rigi d p ipe. The choice of ducting should be specified by the installer but Ø150mm rigid ducting will ensure the best performance possible. The ducting used must be manufactured from fire retardent material con[...]

1 5 Fitting the Chimney Stack The chimney consists of two sections. The upper chimney measures 215mm and the lower chimney (with the holes for recirculation on either side) measures 740mm. - Upper Chimney Stack - Expand the sides of the upper chimney stack item 2.1 and place the chimney over the two brackets 7.2.1 ensuring they are well seated. - S[...]

1 6[...]

1 7[...]

1 8[...]

436000659 02 - 020626 © Electrolux plc 2002[...]