Zanussi ZWH 6160 P manual

EN User manual Washing Machine ZWH 6120 P ZWH 6140 P ZWH 6160 P[...]

Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Frost precaution _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 Firs[...]

not pressing the electrical supply cable against the wall. • Install the appliance on a flat hard floor. • Never place cardboard, wood or similar materials un- der the appliance to compe nsate for any unevenness in the floor. • If the appliance is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely u[...]

To activate this device, ro- tate t he b utton (wi thout pressing it) inside the door clockwise until the groove is horizontal. If necessary use a coin. To disable this device and restore the possibility of closing the door, rotate the button anti-clockwise until the groove is vertical. Frost precaution If the appliance is installed in a place wher[...]

>PP<=polypropylene This means that they can be recycled by disposing of them properly in appropriate collection containers. Ecological hints To save water, energy and to help protect the environment, we recommend that you follow these tips: • Normally soiled laundry may be washed without pre- washing in order to save detergent, water and ti[...]

Electrical connection Information on the electrical connection is given on the rating plate, on the inner edge of the appliance door. Water supply pressure Minim um Maxi mum 0,05 MPa 0,8 MPa Maximum Load Cotton 7 kg Spin Speed Maxi mum 1200 rpm (ZWH 6120P) 1400 rpm (ZWH 6140P) 1600 rpm (ZWH 6160P) Installation Unpacking Warning! • Read carefully [...]

• Return appliance to it's upright position. • Open the door and re- move the plastic hose guide, the bag contain- ing the instruction booklet and the plastic plug caps from the drum. • Remove the power supply cable and the draining and inlet hose from the hose holders ( C ) on the rear of the appliance. • Unscrew the three bolts ( A )[...]

Positioning and lev elling x 4 Level the appliance by raising or lowering the feet. The appliance MUST be level and stable on a flat hard floor. If necessary, check the setting with a spirit level. Any necessary adjustment can be made with a spanner. Accurate levelling prevents vibration, noise a nd dis- placement of the appliance during operation.[...]

Push the drain hose onto the spigot and secure with a clip, ensure a loop is formed in the drain hose to pre- vent waste from the sink entering the appliance. If the outlet spigot has not been used before, remove any blanking plug that may be in place. • Directly into a drain pipe at a height of not less than 60 cm and not more than 100 cm. MAX 1[...]

In the interest of the environment The appliance should be connected to the FOUL drainage system, the water will then be taken to a sewage works for treatment before being discharged safely into a river. It is essential that these appliances are not connected to the surface water drainage system as this water is dis- charged directly into a river o[...]

Before Loading The Laundry Important! Make sure that no metal objects are left in the laundry (e.g. hair clips, safety pins, pins). Button up pillowcases, close zip fasteners, hooks and pop- pers. Tie any belts or long tapes. Remove any hooks (e.g curtains). • Never wash whites and coloureds together. Whites may lose their «whiteness» in the wa[...]

Although biodegradable, detergents contain substances which, in large quantities, can upset the delicate balance of nature. The choice of detergent will depend on the type of fabric (delicates, woollens, cottons, etc.), the colour, washing temperature and degree of soiling. All commonly available washing machine detergents may be used in this appli[...]

• Measure out the deter- gent. • Pour the powder deter- gent into the main wash compartment . The flap is up and you wish to use liquid detergent: • Rotate the flap down- wards. • Carefully put the drawer back. • Measure out the detergent. For the quantity of detergent, refer always to what is written on the product packing and ensure tha[...]

7 6 4 3 2 1 5 1 Programme selector dial Specials Cottons Cottons +Prewash Economy Synthetics Mixed F abric Delicates Wool Handwash Rinse Drain Spin Easy Iron Blanket Mini 30 Jeans Turn the programme selector dial to the required programme. The selector dial can be turned either clockwise or counter-clockwise. The green pilot light of the button 6 s[...]

3 Autom atic Spin r educt ion an d Rinse Hold Spin By selecting a programme, the appliance proposes automatically the maxi- mum spin speed provided for that programme. By selecting Automatic Spin reduction ( ) the spin speed is reduced to a half, but not less than 400 rpm. The relevant light illuminates. Rinse Hold By selecting this function the wa[...]

Important! The selected delay c an be changed only after s electing the wash- ing programme again. The door will be locked throughout the delay time. If you need to open the door, you must set the appliance to PAUSE (by press- ing the button 6 ) and then wait a few minutes. After you have closed the door, press the button 6 again. 6 Start /Pause St[...]

another wash, close the water tap. Leave the door open to prevent the formation of mildew and unpleasant smells. Warning! If there are children or pets in the house, activate the child safety device in the inner side of the door frame (for more details read " Child safety" in the chapter "Safety Information"). Stand by : during [...]

Programme - Maximum and Minimum Temperature - Cycle De- scription - Maximum Spin Speed - Maximum Fabrics Load - Type of Laundry Options Detergent Com- partment SYNTHETICS 60° - C old Main wash - Rinses - Maximum spin speed at 1200 rpm Max. load 3,5 kg - Reduced load 2 kg Synthetic or mixed fabrics : underwear, coloured garments, non- shrink shirts[...]

Programme - Maximum and Minimum Temperature - Cycle De- scription - Maximum Spin Speed - Maximum Fabrics Load - Type of Laundry Options Detergent Com- partment SPIN Drain and long spin at maximum spin speed: 1200 rpm for model ZWH 6120P; 1400 rpm for model ZWH 6140P; 1600 rpm for model ZWH 6160P Max. load 7 kg Separate spin for hand washed garments[...]

Consumption values Programme Energy consumption (KWh) 1) Water consumption (litre) 1) Programme duration (Minutes) 1) White Cottons 90 °C 2.2 79 180 Cottons 60 °C 1.3 73 170 Cottons 40 °C 0.85 73 145 Synthetics 40 °C 0.65 58 95 Delicates 40 °C 0.65 71 77 Wool/ Handwash 30 °C 0.3 48 55 1) The consumption info rmation shown in this chart is in [...]

• Use a stiff brush to clean and remove all washing powder residue. • Clean all the removed parts of the dispenser drawer under a tap to remove any traces of accumulated powder. • Use the previous brush to clean the recess, en- suring that upper and lower part of it is well cleane d. After having cleaned the dispenser and the drawer re- cess,[...]

The filter is inserted correctly when the indicator on its top is visible and blocked. • close the filter cover; • insert the mains plug again. Cleaning th e water inle t filters Important! If the appliance doesn't fill, it takes a long time to fill with water, the starting button flashes red or the display (if available) shows the relevan[...]

The water tap is closed. • Open the water tap. The inlet hose is squashed or kinked. • Check the inlet hose connection. The filter in the inlet hose or the inlet valve filter are blocked • Clean the water inlet filters (read "Cleaning the water inlet filters" for more details). The light of button 6 flashes and the light 7.2 illumin[...]

Malfunction Possible cause / Solution The appliance does not start: The plug is not properly inserted in the power socket. • Insert the plug into the power socket. There is no power at the socket. • Please check your domestic electrical installation. The main fuse has blown. • Replace the fuse. The programme selector dial is not correctly pos[...]

Malfunction Possible cause / Solution Spinning starts late or the ap- pliance does not spin: The electronic unbalance detection device has cut in because the laundry is not even- ly distributed in the drum. The laundry is redistributed by reverse rotation of the drum. This may happen several times before the unbalance disappears and normal spinning[...]

26[...]

27[...]

www.zanussi.com/shop 192987300-A-092011[...]