3M X62w инструкция обслуживания

1 This manual is only intended to explain Network Functions. ► Before using this product, read the “Product Safety Guide” and related manuals to ensure proper use of this product. After reading them, store them in a safe place for future reference. WARNING • The information in this manual is subject to change without notice. • The manufac[...]

2 Contents Contents Caution …………………………………………………………………………………… 3 1. Main Functions ……………………………………………………………………… 5 1.1 Live Mode (Project images from PC) ………………………………………… 5 1.2 PC-LESS Presentation (Displ[...]

3 Caution Caution Caution [Restriction in terms of inserts or pulls memory card and wireless LAN card] Do not pull out the memory card and the wireless card while the power is on. The memory card can be pulled out only while the card access LED (Red) is off. CA UTION  The accompanying 802.1 1g wireless LAN card uses the 2.4GHz radio frequency ba[...]

4[...]

5 1. Main functions 1. Main functions 1. Main functions 1.1 Liv e Mode (Project ima ges fr om PC ) The main function of MIU (Multi Information processing Unit) is the Live Mode. On Live Mode, the projector displays the screen appearing on the PC via network, supported by “MIU Live Viewer” (Fig.1.1.a). The “MIU Live Viewer” captures PC scree[...]

6 1. Main functions Other main function is “PC-LESS Presentation”. (Fig. 1.2.a) “PC-LESS Presentation” has 4 kinds of display modes. 1.2 PC-LESS Presentation (Display the images stor ed in SD car d/USB memor y .) 1) Thumbnail display: Display many stored images in SD card and USB memory at once. (From now on, it is called “memory card” [...]

7 1. Main functions 1.2 PC-LESS Presentation (Display the images stored in SD card/USB memory .) (Continued) Fig. 1.2.b Remote Control • There are following limitations for fi le name and directory name in PC-LESS Presentation. (1) The projector's language setting is Japanese. Only alpha-numeric characters and Japanese are supported. (2) Th[...]

8 Followings are required for 1 projector and 1 PC connection. Multiple PC connection is described in section 4.1. 2. Equipment connection and network setting 2. Equipment connection and network setting 2. Equipment connection and network setting 2.1 R equired equipment pr epar ation Projector: 1 unit PC: 1 set (“MIU Live Viewer” installation i[...]

9 2. Equipment connection and network setting 2.2 Network connection using “One-Click-Communication” function (Continued) e Press the Reset key on remote control. Then Reset Menu will be displayed. r Press the ▲ button to reset the Network settings. /+7 4'5'6 %#0%'. • SSID, WEP KEY will be set to factory default settings. •[...]

10 2. Equipment connection and network setting 4) Click “One-Click” button in fi g. 2.2.a. Projector is found. Then capture start button is pushed and real time display is started automatically . 2.2 Network connection using “One-Click-Communication” function (Continued) [Wireless LAN connection] 1) When projector network settings such as [...]

11 2. Equipment connection and network setting This is the explanation of network connection settings for Windows XP and Internet Explorer . 1) Log on to Windows XP as administrator authority . (*) 2) Open “Control Panel” from “Start” menu. 3) Open “Network and Internet Connections” in “Control Panel”. (Fig. 2.3.2.a) * Administrator[...]

12 2. Equipment connection and network setting 2.3 Manual network connection setting – In case of wired LAN - (Continued) 5) When more than 2 usable network devices exist, make only one device “valid” that you want to use and the rest of devices “invalid”. (In this case, “Local Area Connection” is selected.) 6) Open “Local Area Conn[...]

13 2. Equipment connection and network setting 2.3 Manual network connection setting – In case of wired LAN - (Continued) [About IP address] Network address portion of PC IP address should be common with projector’s one but the PC total IP address should not be overlapped with other networked equipments. For example, projector initial settings [...]

14 2.3 Manual network connection setting – In case of wired LAN - (Continued) 2. Equipment connection and network setting 1) Click “Internet Options” in “Network and Internet Connections” window (Fig. 2.3.3.a) to open “Internet Properties” window . (Fig. 2.3.3.b) 2.3.3 “Inter net Option” setting Fig. 2.3.3.a “Network and Interne[...]

15 2. Equipment connection and network setting 2.3 Manual network connection setting – In case of wired LAN - (Continued) Fig. 2.3.3.c “Local Area Network (LAN) Settings” window 3) Uncheck all boxes in “Local Area Network (LAN) Settings” window . (Fig. 2.3.3.c) Check PC and projector are connected properly here. If it is not connected, ch[...]

16 2. Equipment connection and network setting By installing SD-Link1 1g card, PC and wireless LAN are able to communicate in both Ad-Hoc and Infrastructure modes. How to set up wireless LAN connection manually . 2.4 Manual network connection setting – For wireless LAN 2.4.1 Prepar ation f or wir eless LAN connection Fig. 2.4.1.a Without access p[...]

17 2. Equipment connection and network setting 2.4 Manual network connection setting – For wireless LAN (Continued) Using wireless LAN utility for Windows XP standard. Wireless LAN initial settings for the projector is as follows. Connection Control : Ad-Hoc SSID : wireless Channel : 1ch Encryption rating : None Communication speed : AUT O IP add[...]

18 2. Equipment connection and network setting 2.4 Manual network connection setting – For wireless LAN (Continued) 4) Set used protocol as “TCP/IP” and open TCP/IP property . Set IP address and other settings as same as wired LAN connection set up. (   12 ) 5) Open “Wireless Networks” tab. (Fig. 2.4.2.c) Fig. 2.4.2.c “Wireless Ne[...]

19 2. Equipment connection and network setting 2.4 Manual network connection setting – For wireless LAN (Continued) 8) Set each item as follows. Network name (SSID): wireless Data encryption: Invalid (Default setting is invalid.) * This explanation meets the projector default setting. If access point is used or data encryption is used, if needs t[...]

20 When con fi guring or controlling the projector via a web browser , an ID and password are required. There are two types of IDs, Administrator IDs and User IDs. The following chart describes the dif ferences between user and administrator IDs. Below are the factory default settings for administrator IDs, user IDs and passwords. Item Description[...]

21 2. Equipment connection and network setting Refer to the following for con fi guring or controlling the projector via a web browser . Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter [http://192.168.1.10/] into the address bar of the web browser and the screen in Fig. 2.5.a will be displayed. 2) Enter your ID and pas[...]

22 2. Equipment connection and network setting 2.5.1 Network Infor mation All screen images displayed in this manual are screens of a logon using an administrator ID. Any administrator only functions will not be displayed when using a user ID. Refer to the descriptions in each table. Displays the projector ’s current network con fi guration sett[...]

23 2. Equipment connection and network setting 2.5.2 Network Settings Displays and con fi gures network settings. Item Description NETWORK MODE Select Network mode "wired" or "wireless". IP Con fi guration Con fi gures network settings. DHCP ON Enables DHCP . DHCP OFF Disables DHCP . IP Address Con fi gures the IP address wh[...]

24 Click the [Apply] button to save the settings. • The new con fi guration settings are activated after restarting the network connection. When the con fi guration settings are changed, you must restart the network connection. Y ou can restart the network connection by clicking [Network Restart] on the main menu. • If you connect the project[...]

25 2. Equipment connection and network setting 2.5.3 P or t Settings Displays and con fi gures communication port settings. Click the [Apply] button to save the settings. • The new con fi guration settings are activated after restarting the network connection. The network connection must be restarted when the con fi guration settings are chang[...]

26 2. Equipment connection and network setting 2.5.4 Mail Settings Displays and con fi gures e-mail addressing settings. Click the [Apply] button to save the settings. • Y ou can con fi rm whether the mail settings work correctly using the [Send T est Mail] button. • If you connect the projector to an existing network, consult a network admin[...]

27 2. Equipment connection and network setting 2.5.5 Aler t Settings Displays and con fi gures failure & warning alerts. Item Description Cover Error Con fi gures Cover Error alert settings. SNMP T rap Click the [Enable] check box to enable SNMP Trap alerts for this item. Send Mail Click the [Enable] check box to enable e-mail alerts for this[...]

28 2. Equipment connection and network setting 2.5.5 Alert Settings (Continued) Item Description Lamp Error Con fi gures Lamp Error alert settings. SNMP T rap Click the [Enable] check box to enable SNMP Trap alerts for this item. Send Mail Click the [Enable] check box to enable e-mail alerts for this item. Mail Subject Con fi gures the subject li[...]

29 2. Equipment connection and network setting 2.5.5 Alert Settings (Continued) Item Description Lamp Time Error Con fi gures Lamp T ime Error alert settings. SNMP T rap Click the [Enable] check box to enable SNMP Trap alerts for this item. Send Mail Click the [Enable] check box to enable e-mail alerts for this item. Mail Subject Con fi gures the[...]

30 2. Equipment connection and network setting 2.5.5 Alert Settings (Continued) Item Description Other Error Con fi gures Other Error alert settings. SNMP T rap Click the [Enable] check box to enable SNMP Trap alerts for this item. Send Mail Click the [Enable] check box to enable e-mail alerts for this item. Mail Subject Con fi gures the subject [...]

31 2. Equipment connection and network setting 2.5.5 Alert Settings (Continued) Item Description Filter Time Alarm Con fi gures Filter T ime Alarm alert settings. Alarm Time Con fi gures the fi lter time to alert. SNMP T rap Click the [Enable] check box to enable SNMP Trap alerts for this item. Send Mail Click the [Enable] check box to enable e-[...]

32 2. Equipment connection and network setting 2.5.6 Schedule Settings Displays and con fi gures schedule settings. Item Description Daily Con fi gures the daily schedule. Schedule Click the [Enable] check box to enable daily scheduling. Schedule List Displays the current daily schedule. Sunday Con fi gures the Sunday schedule. Schedule Click th[...]

33 2. Equipment connection and network setting 2.5.6 Schedule Setting (Continued) Item Description Speci fi c date No1 Con fi gures the speci fi c date (No.1) schedule. Schedule Click the [Enable] check box to enable speci fi c date (No.1) scheduling. Month/Day Con fi gures the Month and date. Schedule List Displays the current speci fi c dat[...]

34 2. Equipment connection and network setting T o add additional functions and events click the [Add] button and set the following items. Item Description Time Con fi gures the time to execute commands. Command Con fi gures the commands to be executed. Power Parameter Con fi gures the parameters for power control. Input Source Parameter Con fi[...]

35 2. Equipment connection and network setting 2.5.7 Date/Time Settings (Continued) Click the [Apply] button to save the settings. Item Description Daylight Savings Time Click the [ON] check box to enable daylight savings time and set the following items. SNTP Server IP Address Con fi gures the SNTP server address in IP format. Cycle Con fi gures[...]

36 2. Equipment connection and network setting 2.5.8 Security Settings Item Description Administrator authority Con fi gures the Administrator ID and Password. Administrator ID Con fi gures the Administrator ID. The length of the text can be up to 32 alphanumeric characters. Administrator Password Con fi gures the Administrator Password. The len[...]

37 2. Equipment connection and network setting Click the [Apply] button to save the settings. Authentication Password Con fi gures the Authentication Password. The length of the text can be up to 16 alphanumeric characters. Re-enter Authentication Password Used to re-enter the above password for veri fi cation. SNMP Con fi gures the community na[...]

38 2. Equipment connection and network setting 2.5.9 Projector Contr ol The items shown in the table below can be performed using the [Projector Control] menu. Select an item using the up and down arrow keys on the PC. Most of the items have a submenu. Refer to the table below for details. Controls the projector . Item Description Main Power T urns[...]

39 2. Equipment connection and network setting 2.5.9 Projector Control (Continued) Item Description Image Aspect Selects the Aspect setting. Over Scan Selects the Over Scan setting. V Position Adjusts the V Position. H Position Adjusts the H Position. H Phase Adjusts the H Phase. H Size Adjusts the H Size. Auto Adjust Performs Auto Adjustment. 2.5 [...]

40 2. Equipment connection and network setting Language Selects the Language for the OSD. Menu Position V Adjusts the vertical Menu Position. Menu Position H Adjusts the horizontal Menu Position. Blank Selects the Blank mode. Startup Selects the Startup screen mode. MyScreen Lock T urns MyScreen Lock On/Off. Message T urns the Message function On/O[...]

41 2. Equipment connection and network setting 2.5.11 Network Restar t Restarts the projector ’s network connection. Item Description Restart Restarts the projector ’s network connection in order to activate new con fi guration settings. • Restarting requires you to re-log on in order to further control or con fi gure the projector via a we[...]

42 Open browser when it is possible to communicate with projector . Corresponding browser is Internet Explorer 5.5 or later . Specify http://(projector IP address)/ to start. For example, http://192.168.1.10/ (Input this URL when IP address is not changed.) After start up, enter your ID and password, and click [Logon]. Following window appears as s[...]

43 2.6 Utilize Web Remote Control (Continued) Click “Remote Control” in this window to display Web Remote Control as shown in fi g.2.6.b. The same operation as the bundled remote control will done. UP/LEFT/RIGHT/DOWN corresponds to ▲ / ◄ / ► / ▼ respectively . Each mode will be activated by clicking these buttons. • LIVE MODE • THU[...]

44 3. How to use Projector software – Basics - This section explains how to use the “MIU Live Viewer”. 3.1 How to use “MIU Liv e Viewer” 3.1.1. Install “MIU Liv e Viewer” In order to use the projector with a PC for Live Mode, you will fi rst need to install the accompanying software on all the PCs you will be using. • OS: Windows 2[...]

45 3. How to use Projector software – Basics - 3.1.2. Software Installation Procedure 1) T urn on the PC. 2) Shut down all applications. 3) Insert the X62w Operator's Guide CD-ROM into the PC's CD-ROM drive. Also visit www .3m.com/meetings for "MIU Live Viewer" software update. 4) After a moment, the Welcome to MIU Utilities S[...]

46 3.1 How to use “MIU Live V iewer” (Continued) Fig. 3.1.3.a “MIU Live Viewer” Window 3.1.3 Explanation of “MIU Live Viewer” Double click “LiveViewer .exe” to start up. Fig. 3.1.3.a appears on your screen. w r q e s y u t a o i 3. How to use Projector software – Basics - 8) The Hardware Installation dialog appears. Press Continue[...]

47 3. How to use Projector software – Basics - [“MIU Live Viewer” window: Fig. 3.1.3.a] 1) “File” button Display fi le menu. 2) “Help” button Display “MIU Live Viewer” information. 3) Stop button Disconnect projector connection. 4) Capture start button Start real time display . 5) Minimize button Close “MIU Live Viewer” windo[...]

48 3. How to use Projector software – Basics - 3.1 How to use “MIU Live V iewer” (Continued) 1) CPU Share Set up any capturing performance on the PC screen by using control bar Low (At the far left): Set this position when many CPU resources are required by applications other than “MIU Live Viewer”. This setting is not good for displaying[...]

49 3. How to use Projector software – Basics - 1) JPEG Quality When “MIU Live Viewer” is used, it captures PC screen image. Then that is compressed as JPEG and sent to projector . By control bar in this tab, you can set compression rate. Low (At the far left, Low picture quality): Make JEPG compression rate high. Screen refresh interval becom[...]

50 3. How to use Projector software – Basics - This section explains basic of how to use “MIU Live Viewer” functions. • Before start up the MIU Live Viewer , you have to set the projector into LIVE MODE by either of following way . 1) from Web Remote Control (1) Select LIVE MODE 2) from OSD Menu (1) Set the port into MIU menu by remote cont[...]

51 3. How to use Projector software – Basics - 2) Start Web Remote Control (refer to 2.6 Utilize W eb Remote Control), and click “LIVE MODE” button on Web Remote Control to change projector mode to “MIU Live Viewer”. After changing, screen of the output monitor connected with projector turn all blue. 3) Perform following operations on “[...]

52 3. How to use Projector software – Basics - (3) Click Capture start button. 3.1 How to use “MIU Live V iewer” (Continued) Fig. 3.1.4.d Start capturing Based on the above operation, if captured picture of PC screen is displayed real time on monitor connected with projector , it is succeeded. Much easier to connect if you utilize “One-Clic[...]

53 3. How to use Projector software – Basics - Y ou can also activate “PC-LESS Presentation” from the OSD Menu. 1) Open the OSD Menu from the Menu button on the remote control or ▲ / ◄ / ► / ▼ button on Keypad. 2) Select “PC-LESS Presentation” on the MIU Menu. And press the Enter button on the remote control or ► button on Keypa[...]

54 4. Utilize projector – Advanced - 4. Utilize projector – Advanced - 4. Utilize projector – Advanced - This section explains how to connect multiple PCs. 4.1. Utilize “MIU Liv e V iewer” – Advanced - 4.1.1. Connect multiple PCs with one projector (Multiple PCs connection) A projector can be connected with up to 4 PCs to display multip[...]

55 4. Utilize projector – Advanced - 4.1. Utilize “MIU Live V iewer” – Advanced - (Continued) [Connection] 1) Connect all PCs and projector using LAN cables and hub as shown in fi g. 4.1.1.a. Connect projector and output monitor with RGB cable. 2) Start up “MIU Live Viewer” in each PC. Check the IP address in PCs and con fi rm xxx of [...]

56 “PC-LESS Presentation” reads image data from memory cards inserted into SD or USB slot and perform followings. SD Memory and SD Wireless card can not be inserted at the same time. - Thumbnail display (Section 4.2.1) - Display in full screen (Section 4.2.2) - Slide show (Section 4.2.3) - Directory display (Section 4.2.4) 4.2 Utilize “PC-LES[...]

57 6*7/$0#+.=5&? +OCIG ;'5 '06'4 5.+&'5*19 2%.'55 24'5'06#6+10 /'07 +06'48#.5 5612 /1&' 10'6+/&ap[...]

58 4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued) Following operations can be accessible while thumbnail is displayed. * These operations are not accessible while projector OSD menu is displayed. • Thumbnail display shows 12 pictures in 1 page as maximum. • It is not possible to change the input port by INPUT button when THUM[...]

59 4.2.2 Display in full screen Full screen display ( fi g.4.2.2) shows a full display image on the PC. T o make Full- screen display , click [MENU] button in the Web Remote Control menu on the screen. When select [PC-LESS Presentation], then [Thumbnail] from the menu, click [ENTER] so that moves to be full-screen display . Fig.4.2.2 Full-screen D[...]

60 4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued) Y ou can display the image fi le with your desired size. 1) Select the DISPLA Y SIZE in PC-LESS PRESENT A TION Menu. 2) Press the Enter button on the remote control or ► button on the Keypad. 3) Then DISPLA Y SIZE menu appears. 4) Select your desired DISPLA Y SIZE. • REAL : D[...]

61 4.2.3. Slide show Slide show ( fi g.4.2.3) displays a full screen image and move to the next interval. Click the “SLIDE SHOW” button in Web Remote Control, then Slide show will be played. Display time can be set by the Playlist (refer to section 4.3) and menu. Fig. 4.2.3 Slide show 4.2 Utilize “PC-LESS Presentation” – Advanced - (Cont[...]

62 4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued) Y ou can also play the Slide show with the projector Menu. Select “SLIDE SHOW” on PC-LESS PRESENT A TION Menu. And press the Enter button on the remote control or ► button on Keypad. Then Slide show will start. Y ou can play the Slide show at your desired con fi guration. C[...]

63 4.2.4 Director y display Directory display (Fig.4.2.4) shows saved directories and fi les including undisplayable fi les in the memory card on the tree structure. Click the “DIRECTOR Y” button in the Web Remote Control, then the directory tree will be displayed. While displaying directory , preview picture of selected fi le is shown on th[...]

64 4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued) Following operations can be accessible while directory is displayed. * These operations are not accessible while projector OSD menu is displayed. • It is not possible to change the input port by INPUT button when THUMBNAIL, SLIDE SHOW , or DIRECTOR Y is displayed. • Displays t[...]

65 4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued) Y ou can also display the directory with the projector Menu. Select “DIRECTOR Y” in PC-LESS PRESENT A TION Menu. And press the Enter button on remote control or ► button on Keypad. Then directory will be displayed. [File information display] File information display shows fo[...]

66 4.2.5 “PC-LESS Presentation” er r or message Error message is displayed at a speci fi c condition while “PC-LESS Presentation” mode. It appears at the bottom and the gray area of screen. Fig. 4.2.5 “PC-LESS Presentation” error message 4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued) “PC-LESS Presentation” error [...]

67 Playlist is a DOS format text fi le, which decides the order of displayed still image fi les or moving image fi les in the thumbnail or the slide show . Playlist fi le name is [imagelistdir .txt]. It is created in each folder when “PC-LESS Presentation” is displayed. The timing of playlist creation is when “PC-LESS Presentation” is d[...]

68 4. Utilize projector – Advanced - The projector can automatically send an alert to speci fi ed e-mail addresses when the projector requires maintenance or has encountered an error . • Up to fi ve e-mail addresses can be speci fi ed. • The projector may be not able to send e-mail if the projector suddenly loses power . NO TE Mail Setting[...]

69 4. Utilize projector – Advanced - 8) Con fi gure the Failure/Warning Alerts via E-mail settings. Click [Alert Settings] on the main menu. 9) Select and con fi gure each alert item. Refer to [Alert Settings] in [Con fi guring and Controlling the Projector via a Web Browser] for further information. 10) Click the [Apply] button to save the se[...]

70 When SNMP is enabled, the projector is able to send Failure/W arning Alerts to a speci fi ed PC. • It is recommended that SNMP functions be carried out by a network administrator . • SNMP management software must be installed on the computer to monitor the projector via SNMP . NO TE SNMP settings (   25 ) Con fi gure the following it[...]

71 The projector can be automatically controlled via scheduling. • Y ou can schedule the following control events: Power ON/OFF , Input Source and T ransferred Image Display . • There are 3 types of Scheduling, 1) daily 2) day of the week 3) speci fi c date. • The priority for scheduled events is as follows 1) speci fi c date 2) day of the [...]

72 Date/Time Settings (   34 ) The Date/T ime setting can be adjusted via a web browser . Example: If the IP address of the projector is set to 192.168.1.10/: • A Network Restart is required after the Daylight Savings T ime or SNTP con fi guration settings have been changed. • The battery for the built in clock may be dead if the clock l[...]

73 Schedule Settings (   32 ) Schedule settings can be con fi gured from a web browser . Example: If the IP address of the projector is set to 192.168.1.10: There are three types of scheduling. 1) Daily: Perform the speci fi ed operation at a speci fi ed time every day . 2) Sunday ~ Saturday: Perform the speci fi ed operation at the speci[...]

74 The projector can display a still image that is transferred via the network. e-SHOT transmission requires an exclusive application for your PC. Please visit www .3m.com/meetings to obtain the application and software update. Refer to the manual for the application for instructions. 4. Utilize projector – Advanced - 4.7 e-SHO T (Still Ima ge T [...]

75 Y ou can con fi gure and control the projector via the network using RS-232C commands. Communication P or t The following two ports are assigned for the command control. TCP #23 TCP #9715 Command Control Settings (   25 ) Con fi gure the following items from a web browser when command control is used. Example: If the IP address of the pr[...]

76 Command Control Settings (Continued) When the authentication setting is enabled, the following settings are required. (   36 ) 7) Click [Security Settings] on the main menu. 8) Click [Network Control] and enter the desired authentication password. * See NOTE1. 9) Click the [Apply] button to save the settings. * See NOTE2. • The Authentic[...]

77 Command for mat Command formats differ among the dif ferent communication ports. TCP #23 Y ou can use the RS-232C commands without any changes. The reply data format is the same as the RS-232C commands. However , the following reply will be sent back in the event of authentication failure when authentication is enabled. <Reply in the event of[...]

78 Reply Data f or mat The connection ID (the data is same as the connection ID data on the sending data format) is attached to the RS-232C commands reply data. <ACK reply> Reply Connection ID 0x06 1 byte <NAK reply> Reply Connection ID 0x15 1 byte <Error reply> Reply Error code Connection ID 0x1C 2 bytes 1 byte <Data reply>[...]

79 Automa tic Connection Break The TCP connection will be automatically disconnected after there is no communication for 30 seconds after being established. Authentication The projector does not accept commands without authentication success when authentication is enabled. The projector uses a challenge response type authentication with an MD5 (Mes[...]

80 5. T r oubleshooting 5. T roubleshooting 5. T roubleshooting Problem Likely Cause Things to Check Reference Page Number No image The projector is not turned on. Is the projector's lamp on? *17 The projector's input source isn't switched to MIU. Is the projector switched to MIU? *18 Wireless / Wired Live Mode The projector that you[...]

81 5. T r oubleshooting Problem Likely Cause Things to Check Reference Page Number Wireless / Wired Live Mode Lots of interference in the images The compression rate being used for transferring the images is too high. T ry setting the image compression to "High." • Y ou may experience a drop in speed. 49 T wo cursors appear Cursor of th[...]

82 6. Speci fi cations 6. Speci fi cations 6. Speci fi cations Item Specifications Product name Liquid crystal projector File format JPEG, PNG, BMP and MPEG4 Control software Dedicated PC application and Web browser Corresponding protocol TCP/IP , DHCP client and HTTP server Firmware OS μ ITORN4.0 compliance Network Wireless LAN (IEEE802.1 1g) [...]

83 7. Warr anty and After-sales ser vice 7. W arranty and After-sales service 7. W arranty and After-sales service If a problem occurs with the equipment, fi rst refer to the “5. T roubleshooting” (   80 ) section and run through the suggested checks. If this does not resolve the problem, contact your dealer or service company . They wil[...]

Intended Use Before operating this machine, please read this entire manual thor ough ly . The 3M TM Multimedia Projectors are designed, built, and tested for use indoors, using 3M lamps, 3M ceiling mount hardware, and nominal local voltages. The use of other replacement lamps, outdoor operation, or different volt ag es has not been tested and could[...]