Abocom WB2000 инструкция обслуживания

M73-APO01-500 802.11b Wireless CardBus PC Card Quick Installation[...]

REGULATORY STATEMENTS FCC Certification The United States Federal Communication Commission (FCC) and the Canadian Department of Communications have established certain rules governing the use of electronic equipment. Part15, Class B This device complies with Part 15 o f FCC rules. Operation is subject to the following two conditions: 1) This device[...]

Installing the Utility Precaution : Installing the Adapter's u tility before install ing the device i s highly recommended for saving y our time . Precaution for Windows XP users : There are two op tions for you to choose: c Follow below instructions to install the utility. d Skip this section. Go to Installing the Device – Manually - In Win[...]

- 2 - Installing the Device Automatically If the Application setup in Installing the Utility section has been completed, follow below steps to install the device. 1. Locate the CardBus slot of your system . 2. Align the Wireless PC Card toward the CardBus slot. Push evenly an d steadily until it is seated. After the device has been connected to you[...]

- 3 - Manually If you want to install the device before installing the u tility, please follow below sections. 1. Locate the CardBus slot of your system . 2. Align the Wireless PC Card toward the CardBus slot. Push evenly an d steadily until it is seated. After the device has been connected to your computer, Windows will detect the new hardware aut[...]

- 4 - In Windows ME 1. Select Specify the location of the driver (Advanced) , click Next . 2. Insert the device dr iver CD -ROM into t he CD-ROM drive. Select Search for the best driver for your device (Recommended ) and click Browse to provide the appropriate path (e .g. D:Win9xMe ). Click Next . 3. Clic k Next , Windows will copy all the necessa[...]

- 5 - In Windows XP 1. Once the device is well c onnected to your computer, Windows XP will autom atically detect the new device. Select Install from a list or specific location (Advanced) and click Next. 2. Insert the device driver CD-ROM into the CD-ROM drive. Select Include this location in the search: and click Browse to provide the appropriate[...]

- 6 - Network Status Icon The Status Icon Icon Link Status Access Point mode . ( Green ) Peer-to-Peer mode . ( White ) No connection . ( Red ) Link Info The Link Info tab will display the current status of the Wireless Network Adapter.[...]

- 7 - Item Description Status It displays the information about the status of the communication (the BSSID of the Access Point to which the card is ass ociated). SSID The SSID is the unique n ame shared among all points in your wireless network. The name must be identical for all devices and points attempting to connect to the sam e network. It sho[...]

- 8 - Item Description SSID SSID is the unique name shared among all points in your wireless net work. It must be identical for all po ints in the network. It is case-sensitive and must not exceed 32 characters. Make sure that all points in the network ar e set the same. Operating Mode It displays the current operating mode. ( Access Point or Peer-[...]

Item Description ~ Auto Select Auto for the Network adapter to select the Preamble t ype automaticall y depending on the Access Point Preamble type. ~ Long Preamble If in a "noisy" network env ironment, the Preamble Type should be set to Long Preamble . ~ Short Preamble The Short Preamble is intended for applications where minimum overhea[...]

- 10 - Item Description Data Encryption WEP is a data privacy mechani sm based on a 64 Bit/128 Bit shared key algorithm. Check this box to enable WEP encryption. Auth. Mode The authentication mode defines configuration options for the sharing of wireless networks to verify identity and ac cess privileges of roaming wireless network cards. You may c[...]

- 11 - Site Survey The Site Survey tab shows all the available Access Points and their features. Item Description SSID It displays the current SSID setting of the Wireless Network Adapter. WEP It displays the status of WEP Encryption. Channel It displays the selected channel that is currently used . Signal It displays the signal strength of the con[...]

Item Description Re-Scan Search for all avail able networks. Clicking on the button, the de vice will start to rescan and list all available sites. Connect Select one from the list to connect. About You can view basic informa tion about the Utility like the Driver and Utilit y Version. Configuration for Windows XP 1. Go to Start Æ Control Panel Æ[...]

Click Configure to enable Windows configuration. Property Description Antenna ( Diversity, Antenna A or Antenna B ): These settings determine which antenna will be used to tr ansmit or receive. Channel Select the appropriate channel from the list provided to correspond with your network settings . All devices in the wireless LAN must be configured [...]

- 14 - Preamble A preamble is a signal used in wireless environment to synchronize the transmitting timing including Synchronization and Start frame delimiter. ( Note : Please check the setting of AP first.) ~ Auto Select Auto for the Network adapter to select the P reamble type automatically depending on th e Access Point Preamble type. ~ Long Pre[...]

- 15 - 4. In Wireless Network Connecti on Properties window, select the Wireless Networks ta b.  Use Windows to configure… *Use the Configuration Utility for 802.11b Wireless CardBus PC Card Note : If you want to use the utility in Configuration Utility section to configure the wireless sett ings. Make s ure the check box is NOT enabled (pleas[...]

- 16 - * Use Windows to configure Note : Right-click the Network Status icon in the taskbar, cli ck Disable Utility . The Network Status icon in the taskbar will disapp ear, and then you can use Windo ws to configure the wireless settings. Available networks Displays all available networks.[...]

- 17 - Configure Click the button to set up a new network or WEP configuration as illustrated as below. Refresh Click the button to refresh and search for all available netw orks. Preferred networks From avail able networ k(s) liste d above, y ou can select preferre d one(s) i n an order t hat you ca n arrange. The marked one is the currently used [...]

- 18 - Move down Move the selec ted networ k back one position Add… Click the button and th e Wireless Network Properties window will appe ar. In the Network name field, enter you r desired net work name listed in the above Available network s box, and click OK . Note : The new settings will be active o nly after you click on OK in the Wireless N[...]