Acer 710 Series инструкция обслуживания

700-e.book : 700-eCOP.fm Page i Tuesday, July 28, 1998 10:24 AM[...]

Copyright © 1998 Acer Incorpora ted All Rights Reser ved — Printed in T aiw an Changes may be made periodically to the infor mation in this publication without obligation to notify any person of such revision or changes. Such changes will be incorporated in new editions of this manual. This company makes no representations or warranties, either [...]

T able of Contents iii Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii Connecting the Computer . . . . . . . . . . . . . . . . . . . . xiv Getting Help Online . . . . . . . . . . . . . . . . . . . . . . . . xvii Sup[...]

T able of Contents iv Traveling Internationally with the Computer . . . . . . 69 Chapter 5 Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 System Software . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 PhDISK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Notebook Manager . . . . . . . . . .[...]

v FCC Notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against har mful inter ference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not insta[...]

Notices vi Caution Changes or modifications not expressly approved by the manufacturer could void the user’s authority, which is granted by the Federal Communications Commission, to operate this computer . Use Conditions This part complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not[...]

Notices vii Impor tant Safety Instr uctions 1. Read these instructions carefully. Save these instructions for future reference. 2. Follow all war nings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this[...]

Notices viii 10. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 11. Do not attempt to service this product yourself, as opening or removing covers may expose you to dange[...]

Notices ix 15. Use only the proper type of power supply cord set (provided in your accessories box) for this unit. It should be a detachable type: UL listed/CSA certified, type SP T -2, rated 7A 125V minimum, VDE appr oved or its equivalent. Maximum length is 15 feet (4.6 meters). 700-e.book : 700-eNOT.fm Page ix Tuesday, July 28, 1998 10:24 AM[...]

Notices x Laser Compliance Statement The CD-ROM drive in this computer is a laser product. The CD-ROM drive’s classification label (shown below) is located on the drive. CLASS 1 LASER PRODUCT CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. A VOID EXPOSURE TO BEAM. APPAREIL A LASER DE CLASSE 1 PRODUIT LASERA TTENTION: RADIATION DU FAISCEAU LASER INV[...]

Notices xi Lithium Batter y Statement CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer . Discard used batteries according to the manufacturer’s instructions. ADV ARSEL! Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske me[...]

Notices xii Y ear 2000 Compliance Statement The Extensa 700 series notebook computer is Y ear 2000- compliant and carries the “NSTL Hardware Tested Y ear 2000 Compliant” logo. This model has been tested both by Acer’s inter nal test labs and NSTL using NSTL’s YMARK2000 certification test. These tests certify that this model will successfull[...]

xiii This manual describes features of the Extensa 700/710 Series notebook computers. The Extensa series computers incorporate such features as CardBus, PCI-based 16-bit stereo audio, Fast Infrared, inter nal pointing device, Universal Serial Bus, and all-in-one media storage. This manual should answer most of the questions you have about the day-t[...]

Preface xiv Connecting the Computer Connecting the computer is as easy as 1-2-3. 1. Slide out the battery compartment cover and insert the battery pack into the battery compartment. Then slide the battery compartment cover in place. The battery pack has a pull loop at the end for easy remov al . 2. Connect one end of the AC adapter to the DC-in por[...]

Preface xv 3. Slide the display cover latch to the left to open the display. Slide the power switch towards the rear of the computer then release it to tur n on the power . The POST (Power On Self-Test) routine executes and Windows begins loading. 700-e.book : 700-ePRE.fm Page xv Tuesday, July 28, 1998 10:24 AM[...]

Preface xvi Note: To tur n off the power , press the power switch for more than four seconds. If you ar e using Windows 98 or Windows 95 operating system, we recommend that you use the Shutdown command to tur n off the computer . If you tur n off the computer and want to turn it on again, wait at least two seconds before powering up. 700-e.book : 7[...]

Preface xvii Getting Help Online This user’s guide provides clear and concise infor mation about the computer , so read it thoroughly. T o provide you with help when traveling, the computer also has a comprehensive online help. Accessing Online Help Follow these steps to access the online documentation: 1. Press the Windows logo button or Click o[...]

Preface xviii Suppor t Inf orma tion Y our computer is backed by an Inter national T raveler’s W arranty (ITW) that gives you security and peace of mind when traveling. Our worldwide network of service centers are there to give you a helping hand. An ITW passport comes with your computer . This passport contains all you need to know about the ITW[...]

Preface xix Care and Maintenance T aking Care of Y our Computer Y our computer will serve you well if you take care of it. ❑ Do not expose the computer to direct sunlight. Do not place near sources of heat, such as a radiator . ❑ Do not expose the computer to temperatures below 0ºC (32ºF) or above 50ºC (122ºF). ❑ Do not subject the comput[...]

Preface xx ❑ The total ampere ratings of the equipment plugged in should not exceed the ampere rating of the cord if you are using an extension cord. Also, the total current rating of all equipment plugged into a single wall outlet should not exceed the fuse rating. T aking Care of your Batter y Pac k Here are some ways to take care of your batte[...]

1 This computer combines high-per for mance, versatility, power management features and multimedia capabilities with a unique style and ergonomic design. W ork with unmatched productivity and reliability with your new power computing partner . This chapter gives an in-depth "tour" of the computer’s many features. Contents Features . . .[...]

2 User’s Guide Securing your Computer . . . . . . . . . . . . . . . . . . . . . 29 Security Notch . . . . . . . . . . . . . . . . . . . . . . . . . 29 Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 700-e.book : 700-1e.fm Page 2 Tuesday, July 28, 1998 10:24 AM[...]

Fea tu r e s Chapter 1 Getting Familiar with y our Computer 3 Fea tu r e s This computer was designed with the user in mind. Here are just a few of its many features: Perf or mance ❑ Intel Pentium® II processor or Intel Pentium® processor with MMX™ technology ❑ 64-bit main memory and exter nal (L2) cache memory ❑ Large LCD display and PCI[...]

Fe a t u r e s 4 User’s Guide Human-centric Design and Ergonomics ❑ Lightweight and slim ❑ Sleek, smooth and stylish design ❑ Full-sized keyboard ❑ Wide and curved palm rest ❑ Ergonomically-centered touchpad pointing device Expansion ❑ CardBus PC card (for merly PCMCIA) slots (two type II/I or one type III) with ZV (Zoomed Video) port[...]

Display Chapter 1 Getting Familiar with y our Computer 5 Display The large graphics display of fers excellent viewing, display quality and desktop per for mance graphics. The computer supports two dif ferent display configurations — Super Clear Color (SCC) or Thin-Film T ransistor (TF T). Video P erformance PCI local bus video with 128-bit graphi[...]

Display 6 User’s Guide Opening and Closing the Display To open the display, slide the display cover latch to the left and lift up the cover . Then tilt it to a comfortable viewing position. The computer employs a microswitch that tur ns of f the display (and enters standby mode) to conserve power when you close the display cover , and tur ns it b[...]

Indicator s Chapter 1 Getting Familiar with y our Computer 7 Indicator s The computer has six easy-to-read status indicators (LEDs) under the display screen. The Power and Standby indicators are visible even when you close the display cover so you can see the status of the computer while the cover is closed. Icon Function Description P ower Lights [...]

Indicator s 8 User’s Guide Caps Lock Lights when Ca ps Lock is activ ated Num Lock Lights when Numer ic Lock is activ ated Icon Function Description 700-e.book : 700-1e.fm Page 8 Tuesday, July 28, 1998 10:24 AM[...]

K e yboard Chapter 1 Getting Familiar with y our Computer 9 K eyboar d The keyboard has full-sized keys and an embedded keypad, separate cursor keys, two Windows 98/W indows 95 keys and twelve function keys. Special K eys Lock K eys The keyboard has three lock keys which you can toggle on and of f. Lock K ey Description Caps Lock When Caps Lock is [...]

Ke y b o a r d 10 User’s Guide Embedded Numeric Ke ypad The embedded numeric keypad functions like a desktop numeric keypad. It is indicated by small characters located on the upper right cor ner of the keycaps. To simplify the keyboard legend, cursor -control key symbols are not printed on the keys. Desired Access Num Lock On Num Lock Of f Numbe[...]

K e yboard Chapter 1 Getting Familiar with y our Computer 11 Windo ws 98/Windo ws 95 K eys The keyboard has two keys that per for m Windows 98-/ Windows 95-specific functions. Key Descr iption Windows logo ke y Start button. Combinations with this key perf orms special functions . Below are a fe w examples: á + T ab (Activate next T askbar button)[...]

Ke y b o a r d 12 User’s Guide Hot K eys The computer employs hot keys or key combinations to access most of the computer’s controls like screen contrast and brightness, volume output and the BIOS setup utility. Hot Ke y Icon Function Description Fn-F1 Hot ke y help Displays a list of the hotke ys and their functions. Fn-F2 Setup Accesses the n[...]

K e yboard Chapter 1 Getting Familiar with y our Computer 13 Fn-F4 Hibernation Puts the computer in Hiberna tion mode (if PHDISK, the hibernation utility , is installed, valid and enabled). Press the power switch to resume. Otherwise, the computer enters Standby mode. See “Hibernation Mode” on page 42 f or more about Hiberna tion mode. Fn-F5 Di[...]

Ke y b o a r d 14 User’s Guide Activ ating Hot K eys When activating hot keys, press and hold the first key Fn before pressing the other key in the hot key combination. Fn- → Brightness up Increases the screen brightness . Fn- ← Brightness down Decreases the screen brightness . Fn-H T urbo mode on/of f T oggles turbo mode on and of f. With tu[...]

K e yboard Chapter 1 Getting Familiar with y our Computer 15 K eyboard Ergonomics Located below the keyboard, the wide and curved palm rest is ergonomically designed to provide you with a very comfortable place to rest your hands while you type. 700-e.book : 700-1e.fm Page 15 Tuesday, July 28, 1998 10:24 AM[...]

T ouchpad 16 User’s Guide T ouchpad The built-in touchpad is a PS/2-compatible pointing device that senses movement on its sur face. This means the cursor responds as you move your finger on the sur face of the touchpad. The central location on the palm rest provides optimum comfort and support. T ouchpad Basics The following items teach you how [...]

T ouchpad Chapter 1 Getting Familiar with y our Computer 17 Function Left Button Right Button Ta p Execution Click twice quic kly T ap twice (at the same speed as double- clicking the mouse button) Selection Click once T ap once Drag Click and hold, then use f inger to drag the cursor on the touchpad T ap twice (at the same speed as double- clickin[...]

Storage 18 User’s Guide Storage This computer supplies you with all-in-one media storage: ❑ High-capacity Enhanced-IDE hard disk ❑ Standard ultra-slim inter nal 3.5-inch floppy drive ❑ High-speed CD-ROM drive (swaps with other high- capacity media modules) Hard Disk The removable hard disk module can be upgraded when you need more storage s[...]

Storage Chapter 1 Getting Familiar with y our Computer 19 Ejecting the CD-ROM Tray To eject the CD-ROM drive tray when the computer is tur ned on, press the CD-ROM eject button. Sw apping Modules The flexible media bay allows you to swap the standard CD- ROM drive with other high-capacity media modules such as a DVD-ROM drive, an LS-120 drive or a [...]

Storage 20 User’s Guide 4. Insert a module into the media bay until it clicks in place. 700-e.book : 700-1e.fm Page 20 Tuesday, July 28, 1998 10:24 AM[...]

Por t s Chapter 1 Getting Familiar with y our Computer 21 Por t s Ports allow you to connect peripheral devices to your computer as you would with a desktop PC. Left Ports Note: See Chapter 3 on how to connect exter nal devices to the computer . Icon Por t Connects to... S-video jack T elevision with S-video input jack Infrared port Infrared de vic[...]

Por t s 22 User’s Guide S-Video Y ou can connect a television set with a s-video input jack to the computer , useful for large audience presentations and entertainment. Fast Infrared The computer’s fast infrared (FIR) port allows you to do wireless data transfer with other IR-aware computers and peripherals such as infrared printers. The infrar[...]

Por t s Chapter 1 Getting Familiar with y our Computer 23 Rear P orts Icon Por t Connects to... Speaker -out jack Speake rs or headphones Line-in/ Microphone- in jack Audio line-in de vice with a 3.5mm minijack (e.g., condenser microphone, audio CD play er , stereo walkm an). Serial por t Serial device (e.g., serial mouse) Modem jack Phone line Par[...]

Por t s 24 User’s Guide Fax/Data Modem The computer has a built-in fax/data modem. To use the fax/data modem port, connect a phone cable from the modem port to a telephone jack. Start your communications software program. See your communications manual for instructions. DC-in jack A C adapter and power outlet Caution: This modem port is not compa[...]

Por t s Chapter 1 Getting Familiar with y our Computer 25 Right Ports PC Card Slots There are two type II/I or one type III CardBus PC Card slots found on the right panel of the computer . These slots accept credit-card-sized cards that enhance the usability and expandability of the computer . PC Cards (for merly PCMCIA) are add-on cards for portab[...]

Por t s 26 User’s Guide Inserting a Card Insert the card into the desired slot and make the proper connections (e.g., network cable), if necessary. See your card manual for details. For type III cards, insert the card into the lower slot. Ejecting a Card Before ejecting a PC card: ❑ Exit the application using the card. ❑ Left-click on the PC [...]

Por t s Chapter 1 Getting Familiar with y our Computer 27 Then press the slot eject button to eject the card. Bottom P or t Icon Por t Connects to... Mini docking connector Mini docking station Docking Connector 700-e.book : 700-1e.fm Page 27 Tuesday, July 28, 1998 10:24 AM[...]

A udio 28 User’s Guide A udio The standard computer configuration includes 16-bit high- fidelity stereo audio with further enhancements that include 3D sound for true audio immersion. Dual speakers located on each side of the display hinge direct sound towards to further enhance sound output. A sensitive microphone is located above the display sc[...]

Secur ing y our Computer Chapter 1 Getting Familiar with y our Computer 29 Secur ing y our Computer Security features include hardware and software locks — a security notch and a two-level password scheme. Securi ty Notch A security notch located on the rear panel of the computer lets you connect a Kensington-compatible key-based computer securit[...]

Secur ing y our Computer 30 User’s Guide Setting a Password Y ou can set the password using: ❑ Notebook Manager -- go to page 78. ❑ Setup Utility -- go to page 92. Important: Do not forget your password! If you forget your password, you need to contact your dealer . Note: Y ou must set the supervisor password befor e you can set the user pass[...]

31 The computer operates on AC or battery power . This chapter contains the infor mation you need to know to operate the computer on battery power . It also includes infor mation on how your computer manages and saves power . Contents Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Battery Pack Characteristics . . . . . [...]

Batter y P ack 32 User’s Guide Batter y P a c k The computer uses a battery pack that gives you long use between charges. Batter y P ac k Characteri stics The battery pack has the following characteristics: ❑ Employs Current Battery Technology Standards The computer uses a Lithium-Ion battery pack which does not have the memory effect pr oblem [...]

Batter y P ack Chapter 2 Operating on Ba tter y Pow er 33 3. Disconnect the adapter to use up the battery before recharging again. Y ou only need to do this once with a new battery or with a battery that's been stored without being used for a long time. If the computer is to be stored for more than two weeks, we suggest you remove the battery [...]

Batter y P ack 34 User’s Guide 2. Insert the battery pack into the battery bay. 3. Replace the battery bay cover . To remove the battery pack, remove the battery bay cover; then pull out the battery pack using the pull loop. Charg ing the Batter y To charge the battery, place the battery pack inside the battery bay and plug the AC adapter into th[...]

Batter y P ack Chapter 2 Operating on Ba tter y Pow er 35 ❑ Charge-in-use mode When the computer is in use with the AC adapter plugged in, the computer also charges the battery pack if installed. This mode will take longer to fully charge a battery than rapid mode. In charge-in-use mode, a fully depleted battery gets fully charged in approximatel[...]

Batter y P ack 36 User’s Guide Optimizing Batter y Life This section helps you get the most out of battery operation. Optimizing battery life prolongs the charge/recharge cycle and improves recharge ef ficiency. Follow these suggestions to optimize and maximize battery power: ❑ Purchase an extra battery pack. ❑ Use the PhDISK utility to reser[...]

Batter y P ack Chapter 2 Operating on Ba tter y Pow er 37 Batter y-low W arning Y ou never have to worry about battery power as long as you are using the AC adapter . However , when you operate the computer on battery power , pay extra attention to the war ning beeps and the power indicator on the display panel. The following signals indicate a bat[...]

Batter y P ack 38 User’s Guide The following table shows the recommended course of action to take when you encounter a battery-low condition. Situation Recommended Action AC a d a p t er and pow er outlet a v ailable 1. Connect the A C adapter to the computer . 2. Sav e all necessary f iles. 3. Resume w ork. P ower of f the computer if y ou wish [...]

Heuristic Po w er Management Chapter 2 Operating on Ba tter y Pow er 39 Heur istic P o w er Management This computer has a built-in heuristic power management unit that monitors system activity. System activity refers to any activity involving one or more of the following devices: keyboard, mouse, floppy drive, hard disk, peripherals connected to t[...]

Heur istic P o w er Management 40 User’s Guide P ow er Management Modes Display Standby Mode Screen activity is deter mined by the keyboard, the built-in touchpad, and an exter nal PS/2 pointing device. If these devices are idle for the period deter mined by the computer’s HPM unit, the display shuts off until you pr ess a key or move the touch[...]

Heuristic Po w er Management Chapter 2 Operating on Ba tter y Pow er 41 There is one necessary condition for the computer to enter Standby mode: ❑ Heuristic Power Management must be set to [ENABLED]. There are four ways to enter Standby mode: ❑ Pressing the Standby hot key Fn-F3 ❑ If the waiting time deter mined by the computer’s HPM unit e[...]

Heur istic P o w er Management 42 User’s Guide ❑ Experience an incoming PC card modem event Hiber nation Mode In Hiber nation mode, all power shuts of f (the computer does not consume any power). The computer saves all system infor mation onto the hard disk before it enters Hiber nation mode. Once you tur n on the power , the computer restores [...]

Heuristic Po w er Management Chapter 2 Operating on Ba tter y Pow er 43 To exit Hiber nation mode, pr ess the power switch. The computer also resumes from Hiber nation mode if the resume timer is set and matched. The computer also resumes via the network if the W ake On LAN parameter is enabled. W ar ning: Do not change any devices (such as add mem[...]

Heur istic P o w er Management 44 User’s Guide Adv anced Pow er Management This computer supports the APM standard designed to further reduce power consumption. APM is a power - management approach defined jointly by Microsoft and Intel. An increasing number of software packages support APM to take advantage of its power -saving features and allo[...]

45 Y our computer of fers excellent expansion capabilities with its built-in ports and connectors. This chapter describes how to connect peripherals and hardware options that help you use your computer with ease. When connecting peripherals, read the manual included with the peripheral for operating instructions. Y ou can purchase most of these and[...]

Exter nal Monitor 46 User’s Guide Exter nal Monitor To show graphical ef fects on a larger display, connect an exter nal monitor to the CR T port. Read the monitor manual for additional instructions. Y ou can also choose to connect other output display devices to the computer via its S-video output jack. Useful for presentations and entertainment[...]

Exter nal K eyboar d Chapter 3 Peripherals and Options 47 Exter nal K eyboard This computer has a keyboard with full-sized keys and an embedded keypad. If you feel more comfortable using a desktop keyboard, you can install a PS/2-compatible exter nal keyboard. To connect an exter nal keyboard, plug the exter nal keyboard into the PS/2 connector . 7[...]

Exter nal K eypad 48 User’s Guide Exter nal K eypad Y ou can also use a 17-key numeric keypad for number - sensitive data entry applications. To connect the keypad, plug the keypad connector into the PS/2 port. 700-e.book : 700-3e.fm Page 48 Tuesday, July 28, 1998 10:24 AM[...]

Exter nal P ointing De vice Chapter 3 Peripherals and Options 49 Exter nal P ointing De vice This computer accepts either a PS/2-compatible or serial mouse or similar pointing device. External PS/2 Mouse The built-in touchpad works alter nately with an exter nal PS/2 mouse which is hot-pluggable. To use a PS/2- compatible mouse, simply plug it into[...]

Exter nal Pointing De vice 50 User’s Guide Exter nal Serial Mouse If you use a serial mouse, plug it into the serial port. To enable the serial mouse, use the Add New Hardware tool in the Windows 98/W indows 95 Control Panel. 700-e.book : 700-3e.fm Page 50 Tuesday, July 28, 1998 10:24 AM[...]

Pr inter Chapter 3 Peripherals and Options 51 Pr inter This computer supports both serial and parallel printers. For a serial printer , plug the printer cable into a serial port. For a parallel printer , plug the printer cable into the parallel port. See your printer manual for operating instructions. Note: If the printer does not function, enter S[...]

A udio De vices 52 User’s Guide A udio De vices Audio devices are easy to connect with the audio ports accessible from the left rear side of the computer . Y ou can plug in an exter nal microphone or audio line-in device to the line-in/microphone-in jack. Amplified speakers or headphones connect to the speaker/headphone-out jack. Setting the Inpu[...]

Mini Docking Station Chapter 3 Peripherals and Options 53 Mini Doc king Station For one-step connection and disconnection from your peripherals, use the optional full-featured port replicator . This port replicator includes all the ports on your computer and adds a few more. It also has a unique dock bay which accepts a CardBus module for additiona[...]

PC Cards 54 User’s Guide PC Cards The computer has two CardBus PC card slots that accommodate two type I/II or one type III PC card(s). Please consult your dealer for PC card options available that you can purchase for your computer . 700-e.book : 700-3e.fm Page 54 Tuesday, July 28, 1998 10:24 AM[...]

USB De vices Chapter 3 Peripherals and Options 55 USB De vices The computer has a USB (Universal Serial Bus) port that allows you to connect peripherals without occupying too many resources. Common USB devices include the mouse and keyboard. Most USB devices also include a built-in USB port connector which allows you to daisy-chain other USB device[...]

Miscellaneous Options 56 User’s Guide Miscellaneous Options Additional P ow er Packs Y ou can order spare batteries and an AC adapter . Batter y Pac k It is good practice to have a spare battery around, especially when you travel. The Lithium-Ion battery, coupled with heuristic power management features, supplies you with more power on-the-go. A [...]

Miscellaneous Options Chapter 3 Peripherals and Options 57 Connect the single connector end of the Y-bridge cable to the computer’s PS/2 port and the double connector ends to the two PS/2 devices. File T ransfer Cable Besides using the infrared port, you can also transfer files between computers using a file transfer cable. Connect the file trans[...]

K ey Component Upgrades 58 User’s Guide K ey Component Upgrades Y our computer delivers superior power and per for mance. However , some users and the applications they use may demand more. This computer allows you to upgrade key components when you need increased per for mance. Memor y Upgrade Memory is upgradeable from 16 to 128 MB, employing 1[...]

K ey Component Upgrades Chapter 3 Peripherals and Options 59 Installing Memor y Follow these steps to install memory: 1. Tur n of f the computer , unplug the AC adapter (if connected) and remove the battery pack. Then tur n the computer over to access its base. 2. Remove the screw from the memory door; then lift up and remove the memory door . 16 M[...]

K ey Component Upgrades 60 User’s Guide 3. Insert the memory module diagonally into the slot, then gently press down until it clicks into place. 4. Replace the memory door and secure it with the screw. The computer automatically detects and reconfigures the total memory size. 700-e.book : 700-3e.fm Page 60 Tuesday, July 28, 1998 10:24 AM[...]

K ey Component Upgrades Chapter 3 Peripherals and Options 61 Hard Disk Upgrade Y ou can upgrade your hard disk with a higher capacity drive when you need more storage space. The computer uses a 12.7mm or 9.5mm 2.5-inch Enhanced-IDE hard disk. Installing a Replacement Hard Disk Follow these steps to install a hard disk: 1. Tur n of f the computer , [...]

K ey Component Upgrades 62 User’s Guide 3. Pull out the hard disk. 4. Insert a new hard disk module into the hard disk bay and tighten the coin-screw by tur ning it clockwise. 700-e.book : 700-3e.fm Page 62 Tuesday, July 28, 1998 10:24 AM[...]

63 This chapter gives you tips and hints on things to consider when moving around or traveling with your computer . Contents Disconnecting from the Desktop . . . . . . . . . . . . . . . 64 Moving Around . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Preparing the Computer . . . . . . . . . . . . . . . . . 65 What To Bring to Short Meeti[...]

Disconnecting from the Desktop 64 User’s Guide Disconnecting from the Desktop Follow these steps to disconnect your computer from exter nal accessories: 1. Save your work in progress. 2. Shut down the operating system. 3. Tur n of f the computer . 4. Disconnect the cord from the AC adapter . 5. Disconnect the keyboard, pointing device, printer , [...]

Mo ving Around Chapter 4 Moving with y our Computer 65 Mo ving Around when you are just moving within short distances, for example, from your office desk to a meeting r oom Preparing the Computer Before moving the computer , close and latch the display cover to place it in standby mode. Y ou can now safely take the computer anywhere you go within t[...]

T aking the Computer Home 66 User’s Guide T aking the Computer Home when you are moving from your of fice to your home or vice versa Preparing the Computer After disconnecting the computer from your desktop, follow these steps to prepare the computer for the trip home: 1. Remove all media from the drives. Failure to remove the media can damage th[...]

T aking the Computer Home Chapter 4 Moving with y our Computer 67 ❑ If you need to stop for an extended period of time and cannot bring the computer with you, leave the computer in the trunk of the car to avoid exposing the computer to excessive heat. ❑ Changes in temperature and humidity can cause condensation. Allow the computer to retur n to[...]

T rav eling with the Computer 68 User’s Guide T rav eling with the Computer when you are moving within a larger distance, for instance, from your office building to a client’s of fice building or traveling locally Preparing the Computer Prepare the computer as if you were taking it home. Be sure the battery in the computer is charged. Airport s[...]

T rav eling Inter na tionally with the Computer Chapter 4 Moving with y our Computer 69 T rav eling Inter nationally with the Computer when you are moving fr om country to country Preparing the Computer Prepare the computer as you would nor mally prepare it for traveling. What T o Br ing with Y ou Bring the following items with you. ❑ AC adapter [...]

T rav eling Inter n ationally with the Computer 70 User’s Guide ❑ If you are using the modem, check if the modem and connector is compatible with the telecom system of the country you are traveling in. 700-e.book : 700-4e.fm Page 70 Tuesday, July 28, 1998 10:24 AM[...]

71 This chapter discusses the important system utilities bundled with your computer . Contents System Software . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 PhDISK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Notebook Manager . . . . . . . . . . . . . . . . . . . . . . . . . 74 Infor mation Viewer . . . . . . . .[...]

System Softw are 72 User’s Guide System Softw are The computer comes preloaded with the following software: ❑ Windows 98, W indows 95 (or Windows NT) operating system ❑ DMI-compliant hardware BIOS utility ❑ Support for LDCM (LANDesk Client Manager) ❑ System utilities, drivers and application software Note: To access Windows 98, Windows 95[...]

PhDISK Chapter 5 Software 73 PhDISK The PhDISK utility allows your computer to enter hiber nation mode. Before entering hiber nation mode, your computer saves all necessary inforcomputer mation into a file or partition created by PhDISK, then shuts of f power to all system components. On the next startup, the computer reloads the infor mation from [...]

Notebook Manager 74 User’s Guide Notebook Manager The computer has a built-in system setup program called Notebook Manager . The Windows 98-/W indows 95-based Notebook Manager allows you to set passwords, the startup sequence of the drives and power management settings. It also shows current hardware configurations. To start the Notebook Manager [...]

Notebook Manager Chapter 5 Software 75 Information Vie wer Infor mation Viewer summarizes and lists information about the specifications and settings of the dif ferent components of your computer . Note: Items in this table may differ slightly fr om the ones onscreen. Item Description CPU Brand, type and cloc k speed of the CPU (Central Pr ocessing[...]

Notebook Manager 76 User’s Guide The current version of the computer’s BIOS shows before the Device-Configuration table. Boot Sequence Boot Sequence defines the boot sequence to follow when your computer boots up. The Boot Sequence screen displays the bootable devices in your computer and the order in which the booting sequence will occur . The[...]

Notebook Manager Chapter 5 Software 77 ❑ Floppy Drive ❑ IDE Hard Drive ❑ CD-ROM Drive (or other bootable media bay module) Simply drag and drop the devices the change the booting order . Click on Apply to accept. Passw ord Password is used to set, modify or delete the password(s) for your computer . There are two passwords used in the system:[...]

Notebook Manager 78 User’s Guide Setting the Super visor Passw ord To set the Supervisor Password, follow these steps: 1. Click on the Change Supervisor Password button. The following dialog box displays: 2. Click on the Enable Supervisor Password checkbox. 3. Click in the New Password textbox and type in up to seven alphanumeric characters (A-Z,[...]

Notebook Manager Chapter 5 Software 79 Setting the User Passw ord To set the User Password, follow these steps: 1. Click on the Change User Password button. 2. Click on the Enable User Password checkbox. 3. Click in the New Password textbox and type in up to seven alphanumeric characters (A-Z, a-z, 0-9) which you want to be your User Password. 4. C[...]

Notebook Manager 80 User’s Guide P ow er Management Power Management is used to set various settings related to power management. This includes the following power -saving-related features: ❑ Enable Heuristic Power Management. Select to enable heuristic power management. See “Power Management Modes” on page 40 for more infor mation on heuri[...]

Notebook Manager Chapter 5 Software 81 ❑ Enable system resume timer . Select to allow the computer to wake-up from standby mode if the resume timer is set and matched. ❑ System Resume T imer . (When Enable system resume timer is selected) click on the button to set the System Resume T imer . Display Device Display Device is used to control vari[...]

Notebook Manager 82 User’s Guide ❑ Brightness for LCD Panel/Contrast for LCD Panel. Click and drag to set the LCD screen brightness and contrast levels. Click on the radio button of the desired item, then click on Apply to accept. To modify the brightness and/or contrast levels, click and hold the slider control and move to the right to increas[...]

Setup Utility Chapter 5 Software 83 Setup Utility The Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/Ouput System). Y our computer is already pr operly configured and optimized, and you do not need to run this utility. However , if you encounter configuration problems, you may need to run Setup. Ple[...]

Setup Utility 84 User’s Guide Main The Main screen contains parameters involving basic computer settings and hardware infor mation. The following table describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. Parameter Description System Time Sets the system time. Format: HH:MM:SS (hour:minut[...]

Setup Utility Chapter 5 Software 85 Boot Device Prio rity Press Enter to access the Boot Device Priority submenu. Speaker Enables or disa bles the internal speaker s on boot- up. Y ou can override this b y toggling Fn-F8 during computer operation. Options: Enabled or Disabled Boot Display Device Sets the display on boot-up. When set to Auto, the co[...]

Setup Utility 86 User’s Guide Hard Disk 0 Submenu The hard disk 0 submenu allows you to set parameters related to your hard disk. Press Enter to access this submenu. The following table describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. Note: The BIOS versions are important information [...]

Setup Utility Chapter 5 Software 87 CD-ROM/AT API Devices Submenu The CD-ROM/ATAPI Devices submenu allows you to set parameters related to the module installed in the media bay. Press Enter to access this submenu. This screen resembles the Hard Disk submenu screen. Y ou can refer to the Item Specific help to the right of the screen or the previous [...]

Setup Utility 88 User’s Guide Boot Device Priority Submenu The Boot Device Priority submenu allows you to set the boot sequence of the bootable devices in your computer . Press Enter to access this submenu. The computer boots-up using the sequence specified in this submenu. To set the boot device priority, use the plus/ minus +- keys. Note: W e s[...]

Setup Utility Chapter 5 Software 89 Adv anced The Advanced screen contains parameters that are related to computer hardware. The following table describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. Caution: The parameters in this screen are for advanced users only. Y ou do not need to chang[...]

Setup Utility 90 User’s Guide Security The Security screen contains parameters that help safeguard and protect your computer from unauthorized use. IrD A P ort Ena bles or disables the infrared port. Options: Enabled or Disabled Par allel P ort Enables or disa bles the parallel port. Options: Enabled or Disabled Mode Sets the operation mode of th[...]

Setup Utility Chapter 5 Software 91 The following table describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. Par am et er Descr iption User Passw ord is When set, this passw ord pr otects the computer and this Setup Utility from unauthorized entr y . When Passw ord on boot and/or P assword [...]

Setup Utility 92 User’s Guide Setting a Passw ord Follow these steps: 1. Use the ↑ and ↓ keys to highlight a Set Password parameter (Supervisor or User) and press the Enter key. The password box appears: 2. Type a password. The password may consist of up to seven characters (A-Z, a-z, 0-9). 3. Press Enter . Retype the password to verify your [...]

Setup Utility Chapter 5 Software 93 The password box appears: 2. Press Enter twice without entering anything in the password box to remove the existing password. 3. Press Esc to go to the Exit menu. 4. Press Save Change & Exit to save the password and exit the Setup Utility. Po wer Sa ving The Power Saving screen contains parameters that are re[...]

Setup Utility 94 User’s Guide Parameter Description Heuristic P ow er Management Enables or disa bles heuristic power management. See “P ow er Management Modes” on page 40 f or more inf or mation on pow er management modes Options: Enabled or Disabled Display Always On When enabled, the computer display is always on. Y ou may w ant to set thi[...]

Setup Utility Chapter 5 Software 95 Exit When you select the Exit menu or press Esc from any screen, the Exit options screen displays. The following table describes the parameters in this screen. W ake On LAN When enabled, the computer wakes up fr om standby mode if the computer is accessed through the netw or k. Consult your netw or k administrato[...]

Setup Utility 96 User’s Guide Get Def ault Va l u e s Resets all parameters to their f actor y-default val u e s . Load Previous Va l u e Disregards an y changes made in the current session and reloads their previous v alues . Sav e Changes Saves an y changes ma de. Note: If you make any parameter changes, select Save Change & Exit or Save Ch[...]

97 This chapter instructs you on how to deal with common system problems. Read it before calling a technician if a problem occurs. Solutions to more serious problems require opening up the computer . Do not attempt to open the computer by yourself. Contact your dealer or an authorized service center for assistance. Contents Frequently-Asked Questio[...]

Frequently-Ask ed Questions 98 User’s Guide Frequently-Ask ed Questions This is a list of possible situations that may arise during the use of your computer , and gives easy answers and solutions to these questions. I pressed the pow er switch and opened the display , but the computer does not star t or boot-up. Look at the Power indicator: ❑ I[...]

Frequently-Ask ed Questions Chapter 6 Tr oubleshooting 99 If pressing a key does not tur n the display back on, two things might be the cause: ❑ The contrast and/or brightness level might be too low. Press Fn- ↑ and Fn- ↓ to adjust the contrast level (only for models with SCC LCDs). Press Fn- ← and Fn- → to adjust the brightness level. ?[...]

Frequently-Ask ed Questions 100 User’s Guide If headphones, earphones or exter nal speakers are connected to the line-out port on the computer’s rear panel, the inter nal speakers automatically tur n of f. External microphone or audio line-in device does not w ork. Check the following: ❑ Make sure the exter nal microphone or audio line-in dev[...]

Frequently-Ask ed Questions Chapter 6 Tr oubleshooting 101 The k eyboard does not respond. T ry attaching an exter nal keyboard to the PS/2 connector on the computer’s rear . If it works, contact your dealer or an authorized service center as the inter nal keyboard cable may be loose. The serial mouse does not work. Check the following: ❑ Make [...]

Frequently-Ask ed Questions 102 User’s Guide The infrared port does not work. Check the following: ❑ Make sure that the infrared ports of the two devices are facing each other (+/- 15 degrees) a maximum of 1 meter apart. ❑ Make sure there is a clear path between the two infrared ports. Nothing should be blocking the ports. ❑ Make sure you h[...]

Error Messages Chapter 6 Tr oubleshooting 103 Error Messages If you receive an error message, note the message and take the corrective action. The following table lists the error messages in alphabetical order together with the recommended course of action. Error Messages Corrective Action CMOS Batter y Bad Contact your dealer or an authorized ser [...]

Error Messages 104 User’s Guide Insert system diskette and press <Enter> ke y to reboot Insert a system (boota ble) diskette in the f loppy drive (A:), then pr ess Enter to reboot. Ke yboard Error or No Ke yboard Connected Contact your dealer or an authorized ser vice center . Ke yboard Interf ace Error Contact y o ur dealer or an authorize[...]

Error Messages Chapter 6 Tr oubleshooting 105 If you still encounter problems after going through the corrective measures, please contact your dealer or an authorized service center for assistance. Some problems may be solved using the BIOS Setup Utility. See “Setup Utility” on page 83. RAM BIOS Bad Contact yo ur dealer or an authorized ser vic[...]

106 User’s Guide 700-e.book : 700-6e.fm Page 106 Tuesday, July 28, 1998 10:24 AM[...]

107 This appendix lists the general specifications of your computer . Microprocessor Intel Mobile Module (IMM) with: ❑ Intel Pentium® II processor or Intel Pentium® processor with MMX™ technology ❑ Integrated 256KB or 512KB Level 2 cache memory Memor y ❑ 16MB main memory expandable to 128 MB ❑ Two 144-pin soDIMM sockets (SDRAM - Synchro[...]

Specifications 108 User’s Guide Aud i o ❑ 16-bit stereo audio (PCI) ❑ 3-dimensional sound with built-in wavetable synthesizer ❑ Dual speakers ❑ Sound Blaster Pro- and Windows Sound System- compatible ❑ Separate audio ports for line-out and line-in/ microphone-in devices K eyboard and Pointing De vice ❑ 84-/85-/88-key Windows 98/W indo[...]

Specifi cations Appendix A Specifications 109 W eight and Dimensions ❑ 3.18 kg (7 lb) ❑ 308 x 251 x 45 mm (12.1 x 9.9 x 1.8 in) T emperature ❑ Operating: 10°C ~ 35°C ❑ Non-operating: -20°C ~ 60°C Humidity (non-condensing) ❑ Operating: 20% ~ 80% RH ❑ Non-operating: 20% ~ 80% RH System ❑ Windows 98, W indows 95, or W indows NT (opti[...]

Specifications 110 User’s Guide Options ❑ 16-/32-/64-MB SDRAM memory upgrade module ❑ Higher -capacity hard disk drive ❑ Media bay modules: DVD-ROM drive, LS-120 drive, 2nd hard disk ❑ PS/2 Y-cable ❑ Full-function mini docking station ❑ Additional AC adapter and battery pack 700-e.book : 700-ae.fm Page 110 Tuesday, July 28, 1998 10:24[...]

Inde x Index 111 A AC adapter caring for ,x i x connecting ,x i v Advanced Power Management ,4 4 APM. See Advanced Power Management audio ,2 8 connecting externally ,5 2 controlling volume ,2 8 setting input source in Notebook Manager ,8 2 setting input source in Setup Utility ,8 5 troubleshooting , 99-100 B battery installing ,x i v battery pack b[...]

Inde x 112 User’s Guide turning on ,x v connections AC adapter ,x i v audio ,5 2 computer ,x i v file transfer cable ,5 7 keyboard, external ,4 7 keypad, external ,4 8 monitor ,4 6 mouse ,4 9 mouse, PS/2 ,4 9 mouse, serial ,5 0 printer ,5 1 PS/2 y-bridge cable ,5 6 s-video ,4 6 USB ,5 5 contrast hot keys ,1 3 setting in Notebook Manager ,8 2 D da[...]

Inde x Index 113 resuming from ,4 3 utility ,7 3 hot keys ,1 2 HPM. See Heuristic Power Management I indicator lights ,7 infrared ,2 2 troubleshooting ,1 0 2 turning on and off ,9 0 ITW. See warranty K keyboard ,9 connecting externally ,4 7 embedded numeric keypad ,1 0 hot keys ,1 2 lock keys ,9 troubleshooting ,1 0 1 Windows 98/Windows 95 keys ,1 [...]

Inde x 114 User’s Guide P palm rest ,1 5 parallel port setting in Setup Utility ,9 0 password ,2 9 changing in Setup Utility ,9 2 checking during boot ,9 1 checking during resume ,9 1 removing in Setup Utility ,9 2 setting in Notebook Manager ,7 8 - 7 9 setting in Setup Utility ,9 2 types ,2 9 PC Card ,2 5 ejecting ,2 6 inserting ,2 6 peripherals[...]

Inde x Index 115 serial mouse connecting ,5 0 serial port setting in Setup Utility ,8 9 service when to call ,x x Setup Utility , 83-96 Advanced menu ,8 9 Boot Device Priority submenu ,8 8 CD-ROM/ATAPI Devices submenu ,8 7 entering ,8 3 Exit menu ,9 5 Hard Disk 0 submenu ,8 6 Main menu ,8 4 navigating ,8 3 Power Saving menu ,9 3 Security menu ,9 0 [...]