ACTi ACM-4200 инструкция обслуживания

Megapixel IP Cube Camera ACM-4200 Ver. 090730 Hardware User’s Manual[...]

0-1 0 PRECAUTIONS 1. Read these instructions All the safety and operating instructions should be read before the product is operated. 2. Heed all warnings All warnings on the product and in the instruction manual should be adhered to. The symbol indicates the following item s, please carefully read the description next to each symbol. a. Failure to[...]

0-2 and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harm ful interference to radio communications. Operation of this equipment in a reside ntial are a is likely to cause harmf ul interference in which case the user will be required to correct th e interference at his own exp[...]

0-3 Table of Contents 0 PRECAUTIONS________________________________________________ 0-1 Trademarks ________________________________________________________________ 0-1 Liability ___________________________________________________________________ 0-1 FCC/CE R egulati on __________________________________________________________ 0-1 1 INTRODUCTION __[...]

1-1 1 INTRODUCTION 1.1 Package Contents ACM-4200 series Power Adaptor (Option) Product CD Camera Stand Warranty Card Accessory 1[...]

1-2 1.2 Features and Benefits This IP device is a cutting-edge digi tal video transmission device. It can compress and transmit real tim e images with outstanding images quality (SXGA, 1280x1024) at reasonable bandwidth through a standard TCP/IP network. That is because it is Ethern et ready and has the powerful ARM9 SoC with excellent system perfo[...]

1-3 powerful surveillance program is incl uded in the package and is very free to use. Users can easily utilize the existing PC to be a digital video recorder. Schedule recording and manual recording keep every important image recorded in the local hard d i sk. Reliable and accurate motion detection with instant warn ing makes you responsive in eve[...]

1-4 1.3 Safety Instructions Don’t use the power supply with other voltages This device is likely to be damaged or damage other equipm ents / personnel, if you use a power supply with different voltage than the one included with this device. A ll warranty of this product will be voided in the situations above. Don’t open the housing of the produ[...]

1-5 4. If the video product does not ope rate normally by following the operating Instructions in this ma nual. Adjust only those controls that are covered by the instru ction manual as an improper adjustment . Other controls m ay result in damage and will often require extensive work by a qualif ied technician to restore the video product to its n[...]

1-6 1.4 Physical Description 1. Action LED Indicator The LED will light up after IP camera has successfully completed the boot process 2. Microphone Input Sensitivity: -42dB ± 3 d B (0dB=1V/Pa at 1KHz) S/N Ratio: More than 58dB Directivity: Omni directional[...]

1-7 3. Power Input If your power input is DC3.3V. 4. Reset Button Step 1: Switch off IP device by di sconnecting the power cable Step 2: Press and continue to hold the Reset Button. Reconnect the power cable while continui ng to hold the reset button. Step 3: Keep holding the reset button depressed around 6 seconds, release the reset button. The un[...]

1-8 1.5 Basic Connections Follow the procedures below to conn ect the IP device to the respective apparatuses. 1. Connect the power adaptor to IP device 2. Connect IP device’s ethern et port to an Ethernet (RJ45 connectors). If your IP device has PoE built-in, you can re gard it as a PD and connect it directly to a PSE device like PoE switch. 3. [...]

1-9 1.6 Product Specification[...]