ADS Technologies PYRO Digital Video None инструкция обслуживания

PYR O PYR O PYR O PYR O PYR O PYR O PYR O PYR O PYR O PYR O PYR O PYR O PYR O PYR O PYR O PYR O PYR O PYR O PYR O Digital V ideo Users Guide www .adstec h.com[...]

[...]

© 2001 ADS T echnologies. All Rights Reserved First Edition: Revision 2.1 Feb, 2001 Microsoft, MS-DOS, Windows, Windows 95 and Windows 98 are registered trademarks of Microsoft Corporation. IBM is a registered trademark of the International Business Machines, Inc. ADS is a registered trademark of ADS T echnologies Inc. ADS T echnologies (ADS) make[...]

A letter from the President of ADS . . . . . . . . . 5 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . 6 System Requirements . . . . . . . . . . . . . . . . . . 6 Package Contents . . . . . . . . . . . . . . . . . . . . . 7 What you ned to install PYRO . . . . . . . . . . . . 7 PYRO 1394 Installation Guide . . . . . . . . . . . . .[...]

5 A Letter from the President of ADS T echnologies “Connect, Create, and Store” At ADS T echnologies, Inc. we bring the best and latest multimedia technology to your PC. Our products allow you to “Connect, Create and Store”. CONNECT with our line of USB and 1394 Host and Hub devices. T oday , exter- nal bus technologies such as USB and Fire[...]

6 Introduction Add 3 FireWire Ports to your PC Use the PYRO Digital V ideo card to transfer video from your digital camcorder to your PC, edit the video, add titles, effects, background music and more. Then send your edited video back to your digital recorder . Display your broadcast quality production on your TV or copy to your VCR. Y our friends [...]

7 Package Contents 1. PYRO Card 2. Software CD (Drivers and V ideo Editing Package) 3. 1394 to DV Editing Cable 4. User ’s Manual Note : If you did not receive one or more of the contents listed above inside the PYRO package, please contact the vendor you purchased it from or contact ADS directly . What you need to install PYRO: • Screwdriver ?[...]

8 INST ALLA TION GUIDE[...]

9 Note to beginning V ideographers: If you are new to video editing, we recommend that you learn the basic concepts of video capture and editing with V ideo Studio, then when you are ready , move on to Media Studio Pro 6.0VE. Media Studio Pro 6.0VE is located on CD #2 and you can install this when you are ready . Media Studio Pro 6.0VE is a profess[...]

10 1.) HARDW ARE INST ALLA TION Follow the steps below to Install the PYRO hardware. Move on to connecting your camcorder and installing the V ideo Studio software only if the PYRO hardware is properly installed. If the PYRO card is listed in Device Manager under 1394 Bus Controller with no exclamation marks and no conflicts, then the PYRO is prope[...]

11 Step 3 Carefully remove the shell from your computer . Step 4 With the power cable disconnected from your computer , touch the metal part of the case to ground yourself. This will discharge any static electricity from your body which can damage your computer . Step 5 Locate an available PCI expansion slot. This will be in the area of your comput[...]

12 Step 7 If necessary , remove the knockout on the back of your computer which cor- responds to the PCI slot you have confirmed as your selection. If there is a screw , place it in a safe place as you will be using it to attach the PYRO 1394 PCI Card. Step 8 Push the PYRO 1394 PCI Card firmly into the PCI slot. Apply pressure as needed (but do not[...]

13 Step 11 Replace the computer ’ s shell and screw it back in place with the screws you removed in step 2. Step 12 Now that your PYRO 1394 PCI Card is installed and the shell is in place, you can safely connect the power cable. Now restart your computer and install the drivers from the CD. When you turn on your computer you will be guided throug[...]

14 Step 1 T o the left is a picture of the dialog box that will notify you that Windows has detected your new hardware. Step 2 Windows will now automatically run the “Add New Hardware Wizard.” Select the first option “Search for the best driver ...” and click the “Next” button. Step 3 Y ou will now see a box that asks where you would li[...]

15 Step 5 Windows will now inform you it is ready to install your new driver . V erify that the path is the same as the picture to the left. It should read “C:WINDOWSINF 1394.INF” Now click the “Next” button. Step 6 Congratulations! Y ou are now done with the driver installation. All that is needed from you now is to click the “Finish?[...]

16 4. Y our Camcorder will be recognized, as a new device by Windows and the camcorder driver will be loaded. In some cases Windows may ask for the Windows 98, WinME or Win2000 CD to load other needed files. 5. Open Device Manager (Start, Settings,Control Panel, System, Device Manager T ab). Check to see how your camcorder is listed. If you are usi[...]

17 Win98SE, W inME or Win2000 Microsoft DV camcorder driver Listed in Device Manager: “Imaging Device” Shown as: DV camera or VCR File name: MSDV .sys Device Control Selection: MS 1394 Device Control Output to camcorder Selection: MS DV Record 4.) INST ALL Video Studio 1. Connect your camcorder . T urn on to VTR/VCR Mode. 2. INST ALL V ideo Stu[...]

18 3. a. Select Change Capture Plug-in and choose Ulead Direct Show Capture Plug-in., Click OK. b . Select Device Control and set the current device to TI 1394 Device Control or MS1394 depending upon which driver you are using (See Connecting Digital Camcorder section above). Click OK. c. Click on Preferences to turn on/of f the user guide and the [...]

19 INST ALLA TION SUMMAR Y : 1.) Install PYRO Card and install 1394 bus controller drivers from the Windows CD. 2.) Install camcorder drivers from PYRO CD #1 3.) Apply external power to your camcorder 4.) T urn Camcorder on to VCR/VTR mode 5.) Plug camcorder into PYRO card. Camcorder is recognized as new device. 6.) Check Device Manager to determin[...]

20 Using Ulead V ideoStudio[...]

21 Y our First Movies USING VIDEO WIZARD BEFORE YOU ST ART : W atch the T utorials V iew the V ideo Studio T utorials on PYRO CD #1 – Click Install V ideo Studio and then click T utorials. NOTE: W e strongly recommend that your read the Video Studio Manual which is located on PYRO CD #1 and can be viewed by clicking the HELP Button. When using V [...]

22 your movies and project information to be stored. 5. Once you click OK you will be taken to Capture Mode(if your camcorder is connected and turned on in VCR/VTR mode). If you are not taken to Capture Mode, then V ideo Studio is not properly recognizing your camcorder , or you opened an existing project and therefore will go directly to Storyboar[...]

23 while the camcorder is in play mode.. 14. Still images are captured at 720 x 480 24 bit, bitmap images 15. Still images can be viewed in any photo software such as the “P AINT” program on every Windows computer . Y ou can also save as .jpg images from the Paint program and you can print the image from this application as well. File Size Limi[...]

24 3. Give your movie a name 4. Choose the “Save As T ype”. Here you can choose from many video file types. Choose the file type you desire for your video output. ONL Y .A VI that is DV Encoded can be transmitted back to the camcorder . 5. Click “Options” 6. Select the options you want for your movie, Resolution size, and compression method[...]

25 video production. Y ou have just created a video that is truly broadcast quality . The movies you can create with the PYRO 1394DV are the same quality as movies created with systems costing hundreds, even thousands of dollars more. DV Smart Play DV Smart Play allows you to transmit video to your digital camcorder without saving as a new movie fi[...]

26 T ips for Smooth V ideo Capture If your system is not optimized, the result may be dropped video frames. V ideo with dropped frames will look jittery and will have audio dropouts. T o ensure that you capture the highest quality video you may want to fol- low these steps: 1. Run Disk Defragmenter . Creating, modifying and deleting files causes fr[...]

27 F . Click and drag the “Read Ahead” optimization slider all the way to full. G. Click OK H. Y ou must restart your machine for these changes to take ef fect. 4. Be sure that DMA is enabled for IDE hard disks. DMA access has lower CPU overhead and transfers of data faster . Note: Not all hardware supports DMA access. If DMA is not supported b[...]

28 Set you camcorder audio to match the Video Studio audio: W e have found that selecting 16-bit stereo audio is the best match to V ideo Studio. If you record your videotapes in 16-bit stereo you should have excellent results. In turn, be sure to set the V ideo Studio audio record settings to PCM 16-bit stereo or CD quality for the best results. T[...]

29 HELP RESOURCES V ideo Studio Help – T ouch “F1” on your keyboard at any time. V ideo Studio User Manual – on PYRO CD #1 V ideo Studio Guide – T urn this on by clicking on “G” (global properties) and selecting preferences. ADS W eb Site www .adstech.com ON-LINE HELP W e are constantly adding more information to the On-Line Help sect[...]

30 For Specific V ideo Studio software questions: Check the Ulead web site: www .ulead.com E-mail Ulead for help: http://www .ulead.com.tw/ulead/suppform.cfm Call Ulead for help: 1-310-896-6391 For PYRO Hardware questions: Check the ADS web site: www .adstech.com E-mail ADS for help: support@adstech.com Call ADS for help: 1-562-926-4338 Support Hou[...]

31 Ser vice and W ar rant y: Ser vice : If yo u requ ire ass ista nce wi th the ins tal lati on, ope rat ion, or appl icati on of your A DS T echn olog ies , I nc. pro duc t t here ar e seve ral opt ions avail able to you as des cribe d i n th e tec hnic al suppo rt sect ion of thi s m anu al. Y our pri mary so urc e f or info rma tion and ass ista[...]

32 tra nsfe rable . Thi s wa rran ty does no t cov er any in compa tibi litie s d ue to the use r ’ s comp uter , har dwar e, softw are or oth er rela ted sys tem co nfigu rati on in whic h th e p roduc t i nterf aces . Pro of of pur chas e wi ll be requ ired befo re an y warr anty con side ratio n b y ADS occ urs. Thi s w arran ty does no t cov [...]

European Office Shannon Industrial Estate Shannon Co. Clare, Ireland Phone: +353.61.702042 North America Office 12627 Hidden Creek W ay Cerritos, CA 90703 Phone: (562) 926-1928 Fax: (562) 926-0518 Support: (562) 926-4338 www .adstec h.com[...]