Advantech 2006957006 5th Edition инструкция обслуживания

PCM-9570/S Socket 370 Celeron™/Pentium ® III SBC with LCD, Ethernet and SCSI User's Manual[...]

Copyright notice This document is copyrighted, 2000. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permiss[...]

Acknowledgments AMD is a trademark of Advanced Micro Devices, Inc. Award is a trademark of Award Software International, Inc. Cyrix is a trademark of Cyrix Corporation. IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Corporation. Intel, Celeron, Pentium and Pentium II are trademarks of Intel Corporation. Microsoft Windows[...]

Packing list Before you begin installing your card, please make sure that the following materials have been shipped: • 1 PCM-9570/S all-in-one single board computer • 1 CD disc with utility and drivers • 1 Startup Manual If any of these items are missing or damaged, contact your distributor or sales representative immediately. Please refer to[...]

Contents Chapter 1 General Information ....................... 1 1.1 Introduction ........................................................................ 2 Highly integrated Socket 370 SBC ...................................... 2 1.2 Features ............................................................................... 3 1.3 Specifications .....[...]

2.9 Floppy drive connector (CN9) ........................................ 17 2.9.1 Connecting the floppy drive ...................................... 18 2.10 Parallel port connector (CN12) ....................................... 18 2.11 Keyboard and PS/2 mouse connector (CN5) ................. 19 2.12 Front panel connector (CN18) ..................[...]

Chapter 3 Software Configuration ................ 31 3.1 Introduction ...................................................................... 32 3.2 Ethernet software configuration ..................................... 33 Chapter 4 Award BIOS Setup ........................ 35 4.1 System test and initialization .......................................[...]

Chapter 6 SCSI Setup and Configurations .. 59 6.1 Introduction ...................................................................... 60 6.2 Before you begin ............................................................... 61 6.3 Basic rules for SCSI host adapter and device installation ...............................................................[...]

C.8 IDE hard drive connector (CN11) .................................. 92 C.9 Parallel port connector (CN12) ....................................... 93 C.10 Backlight connector (CN13) ............................................ 94 C.11 Peripheral power connector (CN14) .............................. 94 C.12 CRT display connector (CN15) ...........[...]

Tables Table 2-1: Jumpers .............................................................................. 8 Table 2-2: Connectors ......................................................................... 9 Table 2-3: CMOS clear (J1) ............................................................... 15 Table 2-4: Buzzer enable/disable (J9) .............[...]

Table C-20: CompactFlash card connector (CN21) ......................... 102 Table C-21: PanelLink connector (CN22) ........................................ 103 Table C-22: Fan power connector (FAN1) ....................................... 104 Table D-1: System I/O ports ............................................................ 106 Table D-2: 1s[...]

Figures Figure 1-1: PCM-9570/S dimensions ................................................... 6 Figure 2-1: Locating jumpers ............................................................. 10 Figure 2-2: Locating connectors (component side) ............................ 11 Figure 2-3: Locating connectors (solder side) .................................[...]

General Information This chapter gives background information on the PCM-9570/S. Sections include: • Introduction • Features • Specifications • Board layout and dimensions CHAPTER 1[...]

2 PCM-9570/S User's Manual 1.1 Introduction The PCM-9570/S is an all-in-one Celeron ™ /Pentium ® III level single board computer (SBC) with an Ultra2 SCSI controller (PCM-9570S), a 2x AGP LCD controller, a PCI Fast Ethernet interface and one PCI expansion slot. With the Intel Celeron TM processor, the PCM-9570/S achieves outstanding perform[...]

Chapter 1 General Information 3 1.2 Features • Ultra2 SCSI interface: Supports up to 80 MB/sec transfer rates (PCM-9570S only) • 3D VGA/LCD interface: Supports a 2x AGP interface, 3D 64-bit engine, as well as a 2.5 MB embedded Trident 9525 DVD chip • Display resolution: Up to 1024 x 768 @ 64 K colors, for both LCD and CRT displays • PanelLi[...]

4 PCM-9570/S User's Manual • Serial ports: Four serial ports with +5 V / +12 V power capability (COM1, 3, 4: RS-232; and COM2: RS-232/422/485) • Watchdog timer: Software enabled/disabled. 62-level interval from 1 to 62 seconds. Jumperless selection. Generates system reset or IRQ11 • Keyboard/mouse connector: 8-pin header connector for ke[...]

Chapter 1 General Information 5 PCI bus Ethernet interface • Chipset: Realtek RTL8139 PCI-bus Ethernet controller • Ethernet interface: PCI 100/10 Mbps, IEEE 802.3U compatible • Remote boot ROM: For diskless system Ultra2 SCSI (PCM-9570S only) • Chipset: SYM 53C895 chips • Performance: Ultra2 SCSI interface, up to 80 MB/sec transfer rates[...]

6 PCM-9570/S User's Manual 1.4 Board layout and dimensions Figure 1-1: PCM-9570/S dimensions[...]

Installation This chapter tells how to set up the PCM-9570/S hardware, including instructions on setting jumpers and connecting peripherals, switches and indicators. Be sure to read all the safety precautions before you begin the installation procedure. CHAPTER 2[...]

8 PCM-9570/S User's Manual 2.1 Jumpers The PCM-9570/S has a number of jumpers that allow you to configure your system to suit your application. The table below lists the function of each of the board ’ s jumpers: T able 2-1: Jumpers Label Function J1 CMOS clear J2 Watchdog timer action J3 SCSI terminator power enable/disable J4 A TX power sw[...]

Chapter 2 Installation 9 2.2 Connectors On-board connectors link the PCM-9570/S to external devices such as hard disk drives, a keyboard, or floppy drives. The table below lists the function of each of the board ’ s connectors: T able 2-2: Connectors Label Function CN1 Ethernet 100/10Base-T connector CN2 A TX feature connector CN4 SCSI connector [...]

10 PCM-9570/S User's Manual 2.3 Locating jumpers Figure 2-1: Locating jumpers[...]

Chapter 2 Installation 11 2.4 Locating connectors 2.4.1 Component side Figure 2-2: Locating connectors (component side)[...]

12 PCM-9570/S User's Manual 2.4.2 Solder side Figure 2-3: Locating connectors (solder side)[...]

Chapter 2 Installation 13 2.5 Setting jumpers You configure your card to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To “ close ” a jumper you connect [...]

14 PCM-9570/S User's Manual 2.6 CPU installation and upgrading You can upgrade to a higher power Pentium processor at any time. Simply remove the old CPU, install the new one, and set the jumpers for the new CPU type and speed. W arning! Alwa ys disconnect the power cord from y our chassis when you are w orking on it. Do not make connections w[...]

Chapter 2 Installation 15 When the CPU is installed, the lever should snap into place at the side of the socket. Note: To remove a CPU, pull the lever out to the side a little and raise it as far as it will go. Lift out the CPU chip. 2.6.2 CMOS clear (J1) W arning: T o a void damaging the computer , alwa ys turn off the power supply bef ore setting[...]

16 PCM-9570/S User's Manual 2.7 Installing DRAM (SODIMMs) 2.7.1 Introduction You can install anywhere from 16 MB to 128 MB of on-board DRAM memory using 16, 32, 64 or 128 MB 144-pin SODIMMs (Small Outline Dual In-Line Memory Modules). 2.7.2 Installing SODIMMs Note: The modules can only fit into a sock et one wa y and their gold pins must point[...]

Chapter 2 Installation 17 2.8.1 Connecting the hard drive Connecting drives is done in a daisy-chain fashion and requires one of two cables (not included in this packing), depending on the drive size. 1.8" and 2.5" drives need a 1 x 44-pin to 2 x 44-pin flat-cable connector. 3.5" drives use a 1 x 44-pin to 2 x 40-pin connector. Wire [...]

18 PCM-9570/S User's Manual 2.9.1 Connecting the floppy drive 1. Plug the 34-pin flat-cable connector into CN9. Make sure that the red wire corresponds to pin one on the connector. 2. Attach the appropriate connector on the other end of the cable to the floppy drive(s). You can use only one connector in the set. The set on the end (after the t[...]

Chapter 2 Installation 19 2.11 Keyboard and PS/2 mouse connector (CN5) The PCM-9570/S board provides a keyboard connector that supports both a keyboard and a PS/2 style mouse. In most cases, especially in embedded applications, a keyboard is not used. The standard PC/AT BIOS will report an error or fail during power-on self-test (POST) after a rese[...]

20 PCM-9570/S User's Manual 2.12.4 Reset switch If you install a reset switch, it should be an open single pole switch. Momentarily pressing the switch will activate a reset. The switch should be rated for 10 mA, 5 V. If you need to make your own cable, you can find the pin assignments for the board ’ s connector in Appendix C. 2.13 Power co[...]

Chapter 2 Installation 21 2.14 ATX power control connector (CN2, J4) 2.14.1 ATX feature connector (CN2) and power button (J4) The PCM-9570/S can support an advanced power button if an ATX power supply is used. To enable the power button: 1. Take the specially designed optional ATX-to-PS/2 power cable (part no. 1703200201). 2. Connect the 3-pin plug[...]

22 PCM-9570/S User's Manual 2.15 ATX power on function select (J11) Table 2-5: A T W po wer on function select (J1 1) Default on Default off * J1 1 * default setting Note1: J11 select 1-2, that while A C power is turned on, the system cannot boot up without A TX power s witch button J4. Note2: J11 select 2-3, that while A C power is turned on,[...]

Chapter 2 Installation 23 T able 2-6: COM2 RS-232/422/485 setting (J10) * RS-232 RS-422 RS-485 J10 * default setting The IRQ and the address range for COM1, 2, 3, 4 are fixed. However, if you wish to disable the port or change these parameters later you can do this in the system BIOS setup. The table below shows the settings for the PCM-9570/S ’ [...]

24 PCM-9570/S User's Manual T able 2-8: COM1 RI pin setting (J6) +5 V J6 +12 V J6 * RI (default setting) J6 T able 2-9: COM2 RI pin setting (J6) +5 V J6 +12 V J6 * RI (default setting) J6 1 2 23 24 1 2 23 24 4 3 1 2 23 24 6 5 1 2 23 24 8 7 1 2 23 24 9 10 1 2 23 24 12 11[...]

Chapter 2 Installation 25 T able 2-10: COM3 RI pin setting (J6) +5 V J6 +12 V J6 * RI (default setting) J6 T able 2-11: COM4 RI pin setting (J6) +5 V J6 +12 V J6 * RI (default setting) J6 1 2 23 24 14 13 1 2 23 24 16 15 1 2 23 24 18 17 1 2 23 24 20 19 1 2 23 24 22 21 1 2 23 24[...]

26 PCM-9570/S User's Manual 2.18 VGA interface connections The PCM-9570/S ’ s PCI SVGA interface can drive conventional CRT displays and is capable of driving a wide range of flat panel displays, including electroluminescent (EL), gas plasma, passive LCD and active LCD displays. The board has two connectors to support these displays, one for[...]

Chapter 2 Installation 27 2.18.4 Panel type select (SW1) SW1 is a 6-pin dip switch for selecting the type of panel and display mode. T able 2-12: Panel type select (SW1) Panel type Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 TFT 640 x 480 18-bit O FF ON ON O N ON - TFT 800 x 600 18-bit O FF OFF ON ON ON - TFT 1024 x 768 24-bit OF F ON OFF O N ON - TFT 1024[...]

28 PCM-9570/S User's Manual 2.19 Ethernet configuration The PCM-9570/S is equipped with a high performance 32-bit PCI-bus Ethernet interface which is fully compliant with IEEE 802.3U 10/100Mbps CSMA/CD standards. It is supported by all major network operating systems. The medium type can be configured via the RSET8139.EXE program included on t[...]

Chapter 2 Installation 29 2.20 Watchdog timer configuration An on-board watchdog timer reduces the chance of disruptions which EMP (electro-magnetic pulse) interference can cause. This is an invaluable protective device for standalone or unmanned applications. Setup involves one jumper and running the control software (refer to Appendix A). 2.20.1 [...]

30 PCM-9570/S User's Manual 2.22 SCSI connectors (CN4) The PCM-9570/S has a 68-pin D-sub connector for Ultra2 SCSI devices. Connection of SCSI devices requies special attention, especially when determining the last drive on the SCSI chain. Refer to Chapter 6 and your device ’ s operating manual for detailed installation information. 2.23 Pan[...]

Software Configuration This chapter details the software configuration information. It shows you how to configure the card to match your application requirements. AWARD System BIOS is covered in Chapter 4. Sections include: • Introduction • Ethernet interface configuration CHAPTER 3[...]

32 PCM-9570/S User's Manual 3.1 Introduction The PCM-9570/S system BIOS and custom drivers are located in a 256 Kbyte, 32-pin (JEDEC spec.) Flash ROM device, designated U15. A single Flash chip holds the system BIOS, VGA BIOS, and network Boot ROM image. The display can be configured via CMOS settings. This method minimizes the number of chips[...]

Chapter 3 Software Configuration 33 3.2 Ethernet software configuration The PCM-9570/S ’ s on-board Ethernet interface supports all major network operating systems. To configure the medium type, to view the current configuration, or to run diagnostics, do the following: 1. Power the PCM-9570/S on. Make sure that the RSET8139.EXE file is located i[...]

34 PCM-9570/S User's Manual[...]

Award BIOS Setup This chapter describes how to set BIOS configuration data. CHAPTER 4[...]

36 PCM-9570/S User's Manual 4.1 System test and initialization These routines test and initialize board hardware. If the routines encounter an error during the tests, you will either hear a few short beeps or see an error message on the screen. There are two kinds of errors: fatal and non-fatal. The system can usually continue the boot up sequ[...]

Chapter 4 Award BIOS Setup 37 4.2 Award BIOS setup Award’s BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off. 4.2.1 Entering setup Power on the computer and press <D[...]

38 PCM-9570/S User's Manual 4.2.2 Standard CMOS setup When you choose the STANDARD CMOS SETUP option from the INITIAL SETUP SCREEN menu , the screen shown below is displayed. This standard Setup Menu allows users to configure system components such as date, time, hard disk drive, floppy drive and display. Once a field is highlighted, on-line h[...]

Chapter 4 Award BIOS Setup 39 4.2.3 BIOS features setup By choosing the BIOS FEATURES SETUP option from the INITIAL SETUP SCREEN menu, the screen below is displayed. This sample screen contains the manufacturer’s default values for the PCM-9570/S. Figure 4-3: BIOS features setup[...]

40 PCM-9570/S User's Manual 4.2.4 Chipset features setup By choosing the CHIPSET FEATURES SETUP option from the INITIAL SETUP SCREEN menu, the screen below is displayed. This sample screen contains the manufacturer’s default values for the PCM-9570/S. Figure 4-4: Chipset features setup[...]

Chapter 4 Award BIOS Setup 41 4.2.5 Power management setup By choosing the POWER MANAGEMENT SETUP option from the INITIAL SETUP SCREEN menu, the screen below is displayed. This sample screen contains the manufacturer’s default values for the PCM-9570/S. Figure 4-5: Power management setup[...]

42 PCM-9570/S User's Manual 4.2.6 PnP/PCI configuration By choosing the PnP/PCI CONFIGURATION option from the Initial Setup Screen menu, the screen below is displayed. This sample screen contains the manufacturer’s default values for the PCM-9570/S. Figure 4-6: PnP/PCI configuration[...]

Chapter 4 Award BIOS Setup 43 4.2.7 Integrated peripherals By choosing the INTEGRATED PERIPHERALS option from the INITIAL SETUP SCREEN menu, the screen below is displayed. This sample screen contains the manufacturer’s default values for the PCM-9570/S. The PANEL TYPE by default supports an 18-bit 640 x 480 TFT LCD panel display. Figure 4-7: Inte[...]

44 PCM-9570/S User's Manual 4.2.8 Load BIOS defaults LOAD BIOS DEFAULTS loads the default system values directly from ROM. If the stored record created by the Setup program becomes corrupted (and therefore unusable), these defaults will load automatically when you turn the PCM-9570/S on. Figure 4-8: Load BIOS defaults[...]

Chapter 4 Award BIOS Setup 45 4.2.9 Change password To change the password, choose the PASSWORD SETTING option form the Setup main menu and press <Enter>. 1. If the CMOS is bad or this option has never been used, a default password is stored in the ROM. The screen will display the following messages: Enter Password: Press <Enter>. 2. If[...]

46 PCM-9570/S User's Manual 4.2.10 Auto detect hard disk The IDE HDD AUTO DETECTION utility can automatically detect the IDE hard disk installed in your system. You can use it to self-detect and/or correct the hard disk type configuration. Figure 4-9: IDE HDD auto detection screen 4.2.11 Save & exit setup If you select this option and pres[...]

PCI SVGA Setup • Introduction • Installation of SVGA driver for - Windows 95 - Windows 98 - Windows NT CHAPTER 5[...]

48 PCM-9570/S User's Manual 5.1 Introduction The PCM-9570/S has an on-board PCI flat panel/VGA interface. The specifications and features are described as follows: 5.1.1 Chipset The PCA-9570/S uses a Trident 9525DVD chipset for its PCI/SVGA controller. It supports many popular LCD, EL, and gas plasma flat panel displays and conventional analog[...]

Chapter 5 PCI SVGA Setup 49 5.1.4 Dual/simultaneous display The PCM-9570/S uses a Trident Cyber 9525DVD LCD controller that is capable of providing multiple views and simultaneous display with mixed video and graphics on a flat panel and CRT. To set up dual display under Windows 98, follow these steps: 1. Select “Windows98”, “Control panel”[...]

50 PCM-9570/S User's Manual 5.2 Installation of SVGA driver Complete the following steps to install the SVGA driver. Follow the procedures in the flow chart that apply to the operating system that you are using within your PCM-9570/S. Impor tant: The follo wing windows illustrations are examples only . Y ou must f ollow the flo w char t instru[...]

Chapter 5 PCI SVGA Setup 51 a. Select "S tart" , "Settings" , "Control Panel" , "Display" , "Settings". b. Press "Advanced Properties". a. Choose the "Adapter" label. b. Press the "Change..." button. 1. 2. a. Select the second item. 3. a. Press the "Have Disk"[...]

52 PCM-9570/S User's Manual a. Insert the disc into the CD-ROM drive. b. Type "D:Biscuit9570 VGA.100Win9X". 5. c. Press "OK". D:Biscuit9570VGA.100Win9X a. Click the "Next" button. 7. "Trident Cyber9525DVD PCI/AGP" appears in the Adapter. a. Click the "Apply" button. b. 8. 6. For Windows[...]

Chapter 5 PCI SVGA Setup 53 9. Pr e ss " Y e s" t o r eboot . a. a. R epeat St ep 1 on t he pr evi ous page of t hi s m anual . l abel appear s i n "Di spl ay" . b. A dj ust r esol ut i on and col or . The "Trident" 10. Click "Advanced" for further adjustment. a. Click "OK" to exit. b. 11. END[...]

54 PCM-9570/S User's Manual 5.2.2 Installation for Windows NT a. Select "Start", "Settings", "Control Panel". b. Double click the "Display" icon. a. Choose the "Settings" label. b. Press the "Display Type" button. a. Press the "Change..." button. 1. 2. 3. 4. a. Click the &qu[...]

Chapter 5 PCI SVGA Setup 55 a. S el ect the hi ghl i ght ed ite m . b. P r ess t he "O K " but ton. a. P r ess "Y es" t o p r oceed. a. P r ess "O K " t o r eboot . 6. 7. 8. D:Biscuit9570VGA.100Winnt a . In s e rt th e d is c int o th e CD- RO M dr i ve . b. Type "D:Biscuit9570 VGA.100Winnt" in the bl[...]

56 PCM-9570/S User's Manual 9. a. Repeat Step 1 in this manual, to select the "Settings" label. b. Adjust resolution and color. c. Click "Test" to see the result. END d. Click "OK" to save the setting.[...]

Chapter 5 PCI SVGA Setup 57 5.3 Further information For further information about the PCI/SVGA installation in your PCM-9570/S, including driver updates, troubleshooting guides and FAQ lists, visit the following web resources: Trident website: www.trid.com Advantech websites: www.advantech.com www.advantech.com.tw[...]

58 PCM-9570/S User's Manual[...]

SCSI Setup and Configurations The PCM-9570/S features an on-board SCSI interface. This chapter provides basic SCSI concepts and instructions for installing the software drivers with the SCSI driver disks/CD included in your package. CHAPTER 6[...]

60 PCM-9570/S User's Manual 6.1 Introduction The PCM-9570/S is equipped with a Symbios SYM53C895 single-chip PCI-to-SCSI host adapter which provides a powerful Ultra2 multitasking interface between your computer ’ s PCI bus and SCSI devices (disk drives, CD-ROM drives, scanners, tape backups, removable media drives, etc.). Up to a total of 1[...]

Chapter 6 SCSI Setup and Configurations 61 6.2 Before you begin SDMS software requires an IBM PC/AT or compatible computer with an 80486 or higher microprocessor. An understanding of basic operating system commands is assumed. In addition, users should have a general knowledge of the SCSI standard. Before using the SDMS software, you should configu[...]

62 PCM-9570/S User's Manual 6.4 Configuring the SCSI adapter Access the SCSI BIOS by holding down both the CTRL and C keys when you see the BIOS banner message listing the driver name and the attached devices. For example: Symbios Inc. SDMS (TM) V 4.0 PCI SCSI BIOS PCI Rev. 2.0, 2.1 Copyright 1995, 1998 Symbios Inc. PCI-4.12.00 Press Ctrl-C to[...]

Chapter 6 SCSI Setup and Configurations 63 6.5 SCSI terminators To ensure reliable communication, the SCSI bus must be properly terminated. Termination is controlled by a set of electrical resistors, called terminators. Terminators must be placed (or enabled) at the two extreme ends of the SCSI bus. All devices that lie between the ends must have t[...]

64 PCM-9570/S User's Manual 6.6 SDMS drivers The SDMS device drivers translate an operating system I/O request into a SCSI request. Each Symbios SCSI device driver is operating system specific and is designed to work on standard Symbios chip implementations. We provide PCI SDMS device drivers for the following operating systems: • MS-DOS/Win[...]

Chapter 6 SCSI Setup and Configurations 65 6.7 Utility user's guide and installation instructions The utility user's guide and installation instructions are provided in HTM format in the driver CD-ROM. Users can browse the instructions by using a java-aware browser such as Microsoft Internet Explorer v3.0 or later, or Netscape 2.0 or late[...]

66 PCM-9570/S User's Manual For Windows NT: • WINNT.HTM : Installation guide for device drivers for Windows NT • NEWASNT.HTM : Windows NT 4.0 guided installation for installing SYMC8XX or SYM_HI drivers • NTCONFG.HTM : Windows NT configuration utility (NTCONFIG) • NTDMI.HTM : Installation guide for the NT DMI 1.0 component instrumentat[...]

Chapter 6 SCSI Setup and Configurations 67 Other tools and utilities: • BIOS.HTM : User's guide for SCSI BIOS configuration utility • FLASH.HTM : SDMS host adapter Flash utility • FORMAT.HTM : SDMS SCSI low-level format utility • RAWRITE.HTM : Description of RaWrite 1.3 • UTILMAIN.HTM : SDMS utilities user's guides 6.8 Driver an[...]

68 PCM-9570/S User's Manual[...]

7 CHAPTER PCI Bus Ethernet Interface This chapter provides information on Ethernet configuration. • Introduction • Installation of Ethernet driver for Windows 95/98/NT • Further information[...]

70 PCM-9570/S User's Manual 7.1 Introduction The PCM-9570/S is equipped with a high performance 32-bit Ethernet chipset which is fully compliant with IEEE 802.3 100 Mbps CSMA/CD standards. It is supported by major network operating systems. It is also both 100Base-T and 10Base-T compatible. The medium type can be configured via the RSET8139.ex[...]

Chapter 7 PCI Bus Ethernet Interface 71 7.2.2 Installation for Windows 95/98 a. Select "Start", "Settings", "Control Panel". b. Double click "Network". a. Click "Add" and prepare to install network functions. a. Select the "Adapter" item to add the Ethernet card. a. Click "Have Disk&q[...]

72 PCM-9570/S User's Manual Note 1: The correct file path f or Windo ws 98 is: Biscuit9570Lan.1008139bWin98 Note 2: In the file path, choose " 8139a " or " 8139b " according to the type of Ether net chip used. D:Biscuit9570Lan.1008139bWin95 5. 7. END 6. a. Insert the CD into the D: drive. b. Fill in D:Biscuit 9[...]

Chapter 7 PCI Bus Ethernet Interface 73 7.2.3 Installation for Windows NT a. Select "Start", "Settings", "Control Panel". b. Double click "Network". a. Choose the "Adapters" label. b. Click the "Add" button. a. Press "Have Disk". a. Type "D:". b. Press "OK". 1[...]

74 PCM-9570/S User's Manual 5. D:Biscuit9570Lan.1008139bWinnt a. Choose the "Realtek" item. b. Click "OK". 6. a. Make sure the configurations of relevant items are set correctly. b. Click "OK" to reboot. 7. END a. Insert the CD into the D: drive. b. Fill in "D:Biscuit 9570Lan.100 8139bWinnt"[...]

Chapter 7 PCI Bus Ethernet Interface 75 7.3 Further information Realtek website: www.realtek.com Advantech website: www.advantech.com www.advantech.com.tw[...]

76 PCM-9570/S User's Manual[...]

Programming the Watchdog Timer The PCM-9570/S is equipped with a watchdog timer that resets the CPU or generates an interrupt if processing comes to a standstill for whatever reason. This feature ensures system reliability in industrial standalone, or unmanned, environments. APPENDIX A[...]

78 PCM-9570/S User's Manual A.1 Programming the watchdog timer In order to program the watchdog timer, you must write a program which writes I/O port address 443 (hex). The output data is a value of time interval. The value range is from 01(hex) to 3E(hex), and the related time interval is 1 sec. to 62 sec. Data Time Interval 01 1 sec. 02 2 se[...]

Appendix A Programming the Watchdog Timer 79 The following example shows how you might program the watchdog timer in BASIC: 10 REM Watchdog timer example program 20 OUT &H443, data REM Start and restart the watchdog 30 GOSUB 1000 REM Your application task #1 40 OUT &H443, data REM Reset the timer 50 GOSUB 2000 REM Your application task #2 6[...]

80 PCM-9570/S User's Manual[...]

Installing PC/104 Modules This appendix gives instructions for installing PC/104 modules. APPENDIX B[...]

82 PCM-9570/S User's Manual B.1 Installing PC/104 modules The PCM-9570/S's PC/104 connectors give you the flexibility to attach PC/104 modules. Installing these modules on the PCM-9570/S is quick and simple. The following steps show how to mount the PC/104 modules: 1. Remove the PCM-9570/S from your system paying particular attention to t[...]

Appendix B Installing PC/104 Modules 83 Figure B-1: PC/104 module mounting diagram Figure B-2: PC/104 module dimensions (mm) (±0.1) PCM -9570/ S Female PC/104 Mounti ng Support Mal e PC/104 modul e 8. 9 95. 9 90. 8 5. 1 0 0 5. 1 90. 2 85. 1 5. 1 90. 8 82. 5 ∅ 6. 4 ∅ 3. 2[...]

84 PCM-9570/S User's Manual T able B-1: PC/104 connectors (CN10) Pin Signal Signal Number Row A Row B Row C Row D 0— — 0 V 0 V 1 IOCHCHK* 0 V SBHE* MEMCS16* 2 SD7 RESETDRV LA23 IOCS16* 3 SD6 +5 V LA22 IRQ10 4 SD5 IRQ9 LA21 IRQ11 5 SD4 -5 V LA20 IRQ12 6 SD3 DRQ2 LA19 IRQ15 7 SD2 -12 V LA18 IRQ14 8 SD1 ENDXFR* LA17 DACK0* 9 SD0 +12 V MEMR* D[...]

Pin Assignments This appendix contains information of a detailed or specialized nature. It includes: • Ethernet 10/100Base-T connector • ATX power feature connector • SCSI connector • Keyboard and PS/2 mouse connector • Main power connector • IR connector • Floppy drive connector • IDE hard drive connector • Parallel port connecto[...]

86 PCM-9570/S User's Manual C.1 Ethernet 10/100Base-T connector (CN1) T able C-1: Ethernet 10Base-T connector (CN1) Pin Signal 1V CC 2 CRS LED 3 RCV+ 4 RCV- 5 BNC LED 6 GND 7 N/C 8 GND 9X M T + 10 XMT - C.2 ATX power feature connector (CN2) T able C-2: A TX power feature connector (CN2) Pin Signal 1 5 V SB (stand-by voltage) 2N C 3 VPSON 3 21 [...]

Appendix C Pin Assignments 87 C.3 SCSI Connector (CN4) T able C-3: SCSI connector (CN4) Pin Function Pin Function 1 SD12+ 35 SD12- 2 SD13+ 36 SD13- 3 SD14+ 37 SD14- 4 SD15+ 38 SD15- 5 SDP1+ 39 SDP1- 6 SD0+ 40 SD0- 7 SD1+ 41 SD1- 8 SD2+ 42 SD2- 9 SD3+ 43 SD3- 10 SD4+ 44 SD4- 11 SD5+ 45 SD5- 12 SD6+ 46 SD6- 13 SD7+ 47 SD7- 14 SDP0+ 48 SDP0- 15 GND 49[...]

88 PCM-9570/S User's Manual T able C-3: SCSI connector (CN4) [continued] Pin Function Pin Function 21 A TN+ 55 A TN- 22 GND 56 GND 23 BSY+ 5 7 BSY - 24 ACK+ 5 8 ACK- 25 RST+ 59 RST - 26 MSG+ 60 MSG- 27 SEL+ 61 SEL- 28 CD+ 62 CD- 29 REQ+ 63 REQ- 30 IO+ 64 IO- 31 SD8+ 65 SD8- 32 SD9+ 66 SD9- 33 SD10+ 67 SD10- 34 SD11+ 68 SD11-[...]

Appendix C Pin Assignments 89 C.4 Keyboard and PS/2 mouse connector (CN5) T able C-4: Keyboard and mouse connector (CN5) Pin Signal 1 GND 2 MS VCC 3 MS DA T A 4 MS CLOCK 5 GND 6 KB VCC 7 KB DA T A 8 KB CLOCK 8 1[...]

90 PCM-9570/S User's Manual C.5 Main power connector (CN6) T able C-5: Main power connector (CN6) Pin Signal 1 +12 V 2 GND 3 GND 4 +5 V C.6 IR connector (CN8) T able C-6: IR connector (CN8) Pin Signal 1V CC 2N C 3 IR IN 4 GND 5 IR OUT 5 1 4 3 2 1 4 3 2[...]

Appendix C Pin Assignments 91 C.7 Floppy drive connector (CN9) T able C-7: Floppy drive connector (CN9) Pin Signal Pin Signal 1 GND 2 DENSITY SELECT* 3 GND 4 N/C 5 GND 6 DRIVE TYPE 7 GND 8 INDEX* 9 GND 10 MOTOR 0* 11 GND 12 DRIVE SELECT 1* 13 GND 14 DRIVE SELECT 0* 15 GND 16 MOTOR 1* 17 GND 18 DIRECTION* 19 GND 20 STEP* 21 GND 22 WRITE DA T A* 23 G[...]

92 PCM-9570/S User's Manual C.8 IDE hard drive connector (CN11) T able C-8: IDE hard drive connector (CN11) Pin Signal Pin Signal 1 IDE RESET* 2 GND 3D A T A 7 4D A T A 8 5D A T A 6 6D A T A 9 7D A T A 5 8D A T A 1 0 9 D AT A 4 1 0 D AT A 1 1 11 DA T A 3 12 DA T A 12 13 DA T A 2 14 DA T A 13 15 DA T A 1 16 DA T A 14 17 DA T A 0 18 DA T A 15 19[...]

Appendix C Pin Assignments 93 C.9 Parallel port connector (CN12) T able C-9: Parallel port connector (CN12) Pin Signal Pin Signal 1 STROBE* 2 AUTOFD* 3 D0 4 ERR 5 D1 6 INIT* 7 D2 8 SLCTINI* 9 D3 10 GND 11 D4 12 GND 13 D5 14 GND 15 D6 16 GND 17 D7 18 GND 19 ACK* 2 0 GND 21 BUSY 22 GND 23 PE 24 GND 25 SLCT 26 N/C * low active 4 26 25 3 24 23 1 2[...]

94 PCM-9570/S User's Manual C.10 Backlight connector (CN13) T able C-10: Backlight connector (CN13) Pin Signal 1 +12 V 2 GND 3 Enable 4 Reserved 5 N.C. C.11 Peripheral power connector (CN14) T able C-11: Peripheral power connector (CN14) Pin Function 1 -5 V 2 GND 3 -12 V 5 1 4 3 2 1 2 3[...]

Appendix C Pin Assignments 95 C.12 CRT display connector (CN15) Table C-12: CRT displ ay c onnect or (CN15) Pin Signal Pin Signal 1 RED 9 SIGNAL GND 2 DDC POWER 10 H-SYNC 3 GREEN 11 SIGNAL GND 4 SIGNAL GND 12 V -SYNC 5 BLUE 13 SIGNAL GND 6 N/C 14 N/C 7 N/C 15 SIGNAL GND 8 DDT_DA T 16 CHASSIS GND 4 14 15 3 16 13 1 2[...]

96 PCM-9570/S User's Manual C.13 24-bit LCD display connector (CN16) T able C-13: 24-bit LCD display connector (CN16) Pin Signal Pin Signal 1 VDD 5 V 2 VDD 5 V 3 GND 4 GND 5 VDD 3.3 V 6 VDD 3.3 V 7 Vcon 8 GND 9 PD23 (B ∅ ) 10 PD22 (B1) 11 PD17 (B2) 12 PD16 (B3) 13 PD11 (B4) 14 PD10 (B5) 15 PD9 (B6) 16 PD8 (B7) 17 PD21 (G ∅ ) 18 PD20 (G1) 1[...]

Appendix C Pin Assignments 97 C.14 Ext. LCD display connector (CN17) T able C-14: Ext. LCD display connector (CN17) Pin Signal Pin Signal 1 GND 2 GND 3 PD24 4 PD25 5 PD26 6 PD27 7 PD28 8 PD29 9 PD30 10 PD31 11 PD32 12 PD33 13 PD34 14 PD35 15 GND 16 GND 17 N/C 18 N/C 19 N/C 20 N/C Note 1: The model number of the CN17 connector is DF13A-20DP-1.25V (H[...]

98 PCM-9570/S User's Manual Pi n N ame LCD 16- bit DSTN 18- bi t TFT 2 4-bi t TFT 3 6-bi t TFT PD0 LD 0 R5 R7 R o 5 PD1 LD 1 R4 R6 R o 4 PD2 LD 2 R3 R5 R o 3 PD3 LD 3 R2 R4 R o 2 PD4 LD 4 G5 G7 Go5 PD5 LD 5 G4 G6 Go4 PD6 LD 6 G3 G5 Go3 PD7 LD 7 G2 G4 Go2 PD8 UD 0 B 5 B7 B o 5 PD9 UD 1 B 4 B 6 B o 4 PD10 UD 2 B 3 B5 B o 3 PD1 1 UD 3 B 2 B 4 B o[...]

Appendix C Pin Assignments 99 C.16 Front panel connector (CN18) T able C-16: Front panel connector (CN18) Pin Signal 1 HDD LED- (HARD DISK ACTIVE) 2 HDD LED+ (V CC ) 3 SPEAKER+ 4 SPEAKER- (GND) 5 GND 6 WA TCHDOG OUTPUT* 7 RESET SWITCH- (GND) 8 RESET SWITCH+ * low active C.17 USB connectors (CN19) T able C-17: USB connectors (CN19) Pin Signal Pin Si[...]

100 PCM-9570/S User's Manual C.18 COM port connector (CN20) T able C-18: COM port connector (CN20) Pin Signal Pin Signal 1 DCD1 2 DSR1 3 RX1 4 RTS1 5 TX1 6 CTS1 7 DTR1 8 RI1 9 GND 10 NC 11 DCD2 12 DSR2 13 RX2 14 RTS2 15 TX 2 16 CTS2 17 DTR2 18 RI2 19 GND 20 NC 21 DCD3 22 DSR3 23 RX3 24 RTS3 25 TX 3 26 CTS3 27 DTR3 28 RI3 29 GND 30 NC 31 DCD4 3[...]

Appendix C Pin Assignments 101 T able C-19: COM2 port for RS-232, RS-422 and RS-485 (CN20) Pin Signal RS-232 RS-422 RS-485 11 DCD2 TX- DA T A - 13 RxD2 TX + DA T A+ 15 TxD2 RX+ NC 17 DTR2 RX- NC 19 GND GND GND 12 DSR2 DSR2 (not used) DSR2 (not used) 14 RTS2 RTS2 (not used) DSR2 (not used) 16 CTS2 CTS2 (not used) DSR2 (not used) 18 RI2 RI2 (not used[...]

102 PCM-9570/S User's Manual C.19 CompactFlash card connector (CN21) T able C-20: CompactFlash card connector (CN21) Pin Signal Pin Signal 1 GND 2 D03 3 D04 4 D05 5 D06 6 D07 7 -CS0 8 A10 2 9 -A T A SEL 10 A09 2 11 A08 2 12 A07 2 13 VCC 14 A06 2 15 A05 2 16 A04 2 17 A03 2 18 A02 19 A01 20 A00 21 D00 22 D01 23 D02 24 -IOCS16 25 -CD2 26 -CD1 27 [...]

Appendix C Pin Assignments 103 C.20 PanelLink connector (CN22) T able C-21: PanelLink connector (CN22) Pin Signal Pin Signal 1 TX1+ 2 TX1- 3 TX1 GND 4 TXC GND 5 TXC+ 6 TXC- 7 DDC GND 8 VDD 5 V 9 VDD 5 V 10 VDD 5 V 11 TX2+ 12 TX2- 13 TX2 GND 14 TX0 GND 15 TX0+ 16 TX0- 17 NC 18 NC 19 DDC/SDA (reser ved) 20 DDC/SCL (reserved) 20 1 2 19 18 17 34[...]

104 PCM-9570/S User's Manual C.21 Fan power connector (FAN1) T able C-22: Fan power connector (F AN1) Pin Signal 1N C 2 +12 V 3 GND 3 21[...]

System Assignments • System I/O ports • 1st MB memory map • DMA channel assignments • Interrupt assignments D APPENDIX[...]

106 PCM-9570/S User's Manual D.1 System I/O ports T able D-1: System I/O ports Addr . range (Hex) Device 000-01F DMA controller 020-021 Interrupt controller 1, master 022-023 Chipset address 040-05F 8254 timer 060-06F 8042 (keyboard controller) 070-07F Real-time clock, non-maskable interrupt (NMI) mask 080-09F DMA page register , 0A0-0BF Inter[...]

Appendix D System Assignments 107 D.2 1st MB memory map T able D-2: 1st MB memory map Addr . range (Hex) Device F000h - FFFFh System ROM E000h - EFFFh Unused D000h - DFFFh SCSI ROM *CC00h - CFFFh Ethernet ROM C000h - CBFFh Expansion ROM B800h - BFFFh CGA/EGA/VGA text B000h - B7FFh Unused A000h - AFFFh EGA/VGA graphics 0000h - 9FFFh Base memor y * I[...]

108 PCM-9570/S User's Manual D.4 IRQ mapping chart T able D-4: IRQ mapping chart 0 Interval timer 1 Keyboard 2 Interrupt from Controller 2 3 COM2 4 COM1 5 COM4 6 FDD 7 LPT1 8R T C 9 Reserved 10 COM3 11 Reserved (watchdog timer) 12 PS/2 mouse 13 INT from co-processor 14 Primary IDE 15 Secondary IDE (reserved for CompactFlash) * Ethernet interfa[...]

Optional Extras APPENDIX E[...]

110 PCM-9570/S User's Manual E.1 PCM-10586-4 cable kit for PCM-9570/S The PCM-9570/S requires several cables for normal operation. You can make them yourself or purchase an optional cable kit assembly, which includes the following: . o N t r a P e l b a C n o i t p i r c s e d S / 0 7 5 9 - M C P r o t c e n n o c g n i t a n i m r e T r o t c[...]

Appendix E Optional Extras 111 E.2 USB cable Optional USB cable, part no: 1703100260 E.3 SCSI cables Optional Ultra Wide SCSI cable, 60 cm, part no: 1701680600 (HPP68M/HPP68M/HPP68M) Optional Ultra2 Wide SCSI cable, 120 cm, part no. 1701060000 E.4 24-bit LCD cable adapter This converts from the Hirose “ DF20A ” type connector transfer to a 20 x[...]

112 PCM-9570/S User's Manual[...]

Mechanical Drawings APPENDIX F[...]

114 PCM-9570/S User's Manual F.1 Component side Figure F-1: PCM-9570/S mechanical drawing - component side[...]

Appendix F Mechanical Drawings 115 F.2 Solder side Figure F-2: PCM-9570/S mechanical drawing - solder side[...]

116 PCM-9570/S User's Manual[...]