Advantech PPC-150 инструкция обслуживания

PPC-150 Pentium ® MMX processor-based panel PC with 15" LCD flat panel display[...]

ii Copyright Notice This document is copyrighted, 1999, by Advantech Co. Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to alter the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written per[...]

iii FCC Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses and can radiate rad[...]

iv Packing List Before installing your panel PC, ensure that the following materials have been received: • PPC-150 series panel PC • User's manual • Accessories for PPC-150 - Y-shaped adapter for PS/2 mouse and A T keyboard - Power cord (1.8 m) - USA type (other types are available on request) - Floppy disk with CD-ROM drive driver - &qu[...]

v Additional Information and Assistance 1. V isit the Advantech W eb sites at ww w .advantech.com or www .advantech.com.tw where you can find the latest information about the product. 2. Contact your distributor , sales representative, or Advantech's customer service center for technical support if you need additional assistance. Please have t[...]

vi Safety Instructions 1. Read these safety instructions carefully . 2. Keep this User's Manual for later reference. 3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning. 4. For plug-in equipment, the power outlet socket must be located near the equipment and must[...]

vii Wichtige Sicherheishinweise 1. Bitte lesen sie Sich diese Hinweise sorgfältig durch. 2. Heben Sie diese Anleitung für den späteren Gebrauch auf. 3. V or jedem Reinigen ist das Gerät vom Stromnetz zu trennen. V erwenden Sie Keine Flüssig-oder Aerosolreiniger . Am besten dient ein angefeuchtetes Tuch zur Reinigung. 4. Die NetzanschluBsteckdo[...]

viii Contents Chapter 1 General Information 1 1.1 Introduction ................................................................... 2 1.2 How to Use This Manual ............................................... 4 1.3 Specifications ................................................................ 6 General ..............................................[...]

ix 3.5 PS/2 Mouse and Keyboard ......................................... 27 3.6 PCI/ISA Bus Expansion .............................................. 27 3.7 Parallel Port ................................................................ 29 3.8 Serial COM Ports ........................................................ 29 3.9 VGA Port ..................[...]

x 5.2.5 Cyrix linear mode enable (JP10) .......................................... 56 5.2.6 Reset system (JP16) ........................................................... 57 5.3 COM-port Interface ..................................................... 58 5.3.1 COM2 RS-232/422/485 setting (JP3, JP4, JP5) .................. 58 5.3.2 COM3/COM4/RI pin [...]

xi 8.2.1 Installation of MS-DOS ........................................................ 90 8.2.2 Changing settings in DOS ................................................... 91 8.2.3 Controlling volume in DOS .................................................. 92 8.2.4 Installation for WINDOWS 3.1 ............................................. 93 8.[...]

xii Appendix A LCD Specifications and Selection Settings 139 Appendix B Programming the W atchdog Timer 141 Programming the W atchdog Timer ................................... 142 Appendix C Full Disassembly Procedures 145 Appendix D in Assignments 153 IR Connector (J1) (*Reserved) .......................................... 154 Flat Panel Display C[...]

xiii T ables T able 5-1: Jumpers and their functions ................................................... 45 T able 5-2: Panel PC connectors ............................................................. 47 T able 5-3: System/PCI clock setting (JP1 1) ............................................ 50 T able 5-4: PCI bus clock setting (JP8) ............[...]

xiv T able D-13: PCI/ISA Slot Pin Assignments (Pins E&F) ......................... 165 T able D-14: PCI/ISA Slot Pin Assignments (Pins G&H) ........................ 16 6 T able D-15: Fan Power Connector (J12) .............................................. 167 T able D-16: A T Power Connector (J13) ...........................................[...]

xv Figures Figure 1-1:The panel PC in perspective .................................................... 3 Figure 1-2: How to read the PPC-150 manual .......................................... 5 Figure 1-3: Dimensions of the PPC-150 ................................................. 10 Figure 2-1: Front view of the panel PC ...........................[...]

xvi Figure 9-9: IDE HDD auto detection screen .......................................... 1 18 Figure 9-10: Save and exit setup screen .............................................. 1 19 Figure C-1: Steps 1 - 4 ......................................................................... 147 Figure C-2: Steps 5 - 6 ......................................[...]

1 General Information This chapter gives background information on the PPC-150 panel PC. • Introduction • How to Use This Manual • Specifications CHAPTER[...]

2 PPC-150 User's Manual 1.1 Introduction The PPC-150 panel PC is a multimedia Pentium ® MMX processor-based computer that is designed to serve as a human machine interface (HMI) and as a desktop computer . It is a PC-based system with 15" color TFT LCD display , on-board PCI Ethernet controller , multi-COM port interfac- es and a 16-bit [...]

Chapter 1 General Information 3 Figure 1-1:The panel PC in perspective CRT Monitor Fax modem Network Speakers Keyboard Joystick Printer Mouse T ouchscreen[...]

4 PPC-150 User's Manual 1.2 How to Use This Manual This manual contains all the information you need to set up and use the panel PC. In addition to this manual, you may also want to consult the manuals for your operating system, software applications and peripherals. Whether you are a new or an experienced user , you will benefit more from thi[...]

Chapter 1 General Information 5 Appendix E helps users install the panel PC, which is mountable in a variety of ways. If you are a commercial user and the panel PC unit you bought is a complete set with CPU, hard disk drive, SDRAM, CD-ROM drive, floppy disk drive and PCMCIA expansion slots included, you may only need to read Chapters 1 through 3 re[...]

6 PPC-150 User's Manual 1.3 Specifications General • Dimensions (W x H x D): 420 x 323 x 106 mm (16.54" x 12.72" x 4.17") • W eight: 6.5 kg (14.4 lbs) • Power supply: 80 watts Input voltage: 90 V AC / 3 A ~ 260V AC / 1.5A @ 47 ~ 63 Hz Output voltage: +5 V @ 12 A, +12 V @ 1 A • Cooling fan dimensions (L x W x H): 40 x 40 [...]

Chapter 1 General Information 7 • Serial ports: Four serial ports with three RS-232 ports (COM1, 3, and 4), one RS-232/422/485 port (COM2). All ports are compatible with 16C550 UAR T s. • Universal serial bus (USB) port: Supports up to two USB ports • PCI/ISA bus expansion slot: Accepts either one ISA card or one PCI bus card • W atchdog ti[...]

8 PPC-150 User's Manual PCI bus Ethernet interface • Chipset: Realtek R TL 8139A PCI local bus Ethernet controller • Ethernet interface: Full compliance with IEEE 802.3u 100Base-T and 10 Base-T specifications. Includes software drivers and boot ROM • 100/10Base-T auto-sensing capability T ouchscreen (optional) • T ype: Analog resistive[...]

Chapter 1 General Information 9 Optional modules • CPU: Intel Pentium ® 75 ~ 233 MHz with MMX, P55C/P54C, AMD K5, K6, K6-2 Cyrix M1, M2 • Memory: 16/32/64/128 MB SDRAM • HDD: 2.5" HDD • T ouchscr een: Analog resistive or Surface Acoustic W ave • CD-ROM drive: Compact 24X CD-ROM or above • PCMCIA interface: Complies with 1995 PCMCI[...]

10 PPC-150 User's Manual 1.4 Dimensions Figure1-3: Dimensions of the PPC-150[...]

2 System Setup  A Quick T our of the Panel PC  Preparing for First-time Usage  Running the Setup Program  Installing the System Software  Installing the Drivers CHAPTER[...]

12 PPC-150 User's Manual 2.1 A Quick T our of the Panel PC Before you start to set up the panel PC, take a moment to become familiar with the locations and purposes of the controls, drives, connectors and ports, which are illustrated in the figures below . When you place the panel PC upright on the desktop, its front panel appears as shown in [...]

Chapter 2 System Setup 13 When you look at the left side of the panel PC, you will see the floppy disk drive, CD-ROM drive and PCMCIA expansion sockets, as shown in Fig. 2-2. Figure 2-2: Left side view of the panel PC Compact CD-ROM drive CD-ROM drive activity light CD-ROM eject button PCMCIA socket PCMCIA eject button FDD eject button FDD slot FDD[...]

14 PPC-150 User's Manual When you turn the panel PC around and look at its rear cover , you will find the PCI/ISA expansion slot located on the left side. This slot is covered by a side panel cover . The sunken I/O section is at the bottom of the panel PC, as shown in Fig. 2-3. (The I/O section includes various I/O ports, including serial port[...]

Chapter 2 System Setup 15 Figure 2-4 shows the I/O section and power switch of the panel PC. Figure 2-4: Tilted rear view of the panel PC 2.2 Preparing For First-time Use Before you start to set up the panel PC system, you should have at least the following items ready:  Power cord (in the accessory box)  Y-shaped connector (in the accessory [...]

16 PPC-150 User's Manual 2.3 Installation Procedures 2.3.1 Connecting the power cord The panel PC can only be powered by an AC electrical outlet (90 ~ 260 volts, 47 ~ 63 Hz). Be sure to always handle the power cords by holding the plug ends only . Follow these procedures in order: 1. Connect the female end of the power cord to the AC inlet of [...]

Chapter 2 System Setup 17 2.3.2 Connecting the keyboard and mouse 1. Connect the Y-shaped adapter to the PS/2 mouse and keyboard port on the I/O section of the panel PC. (See Fig. 2-6.) 2. Connect the PS/2 mouse and keyboard to the Y-shaped adapter . (See Fig. 2-6.) If you use a serial mouse and your panel PC has a touchscreen, you can connect the [...]

18 PPC-150 User's Manual 2.4 Running the BIOS Setup Program Y our panel PC is likely to have been properly set up and configured by your dealer prior to delivery . Y ou may still find it necessary to use the panel PC's BIOS (Basic Input-Output System) setup program to change system configuration information, such as the current date and t[...]

Chapter 2 System Setup 19 If required, insert your operating system's installation or setup diskette into the diskette drive until the release button pops out. (See Fig. 3-1.) The BIOS of the panel PC supports system boot-up directly from the CD-ROM drive. Y ou may also insert your system installation CD-ROM into the CD-ROM drive. (See Fig. 3-[...]

20 PPC-150 User's Manual For your reference, the directory of drivers on the "Drivers and Utilities" CD-ROM is: The utility directory includes multimedia programs. Refer to the README.TXT file inside the BIOS folder for more detailed information. The various drivers and utilities in the CD-ROM disc have their own text files which hel[...]

3 Using the Panel PC  Floppy Drive  CD-ROM Drive  PCMCIA Sockets  PS/2 Mouse and Keyboard  Audio Interface  PCI/ISA Bus Expansion  Parallel Port  Serial COM Ports  VGA Port  Game Port  USB Ports  Audio Interface  Ethernet  Adjusting the LCD Contrast and Brightness  T ouchscreen (Optional) CHAPTER[...]

22 PPC-150 User's Manual 3.1 Introduction This chapter describes basic features and procedures for using the panel PC. T opics covered include the floppy drive, CD-ROM drive, I/O ports, touchscreen, and so on. 3.2 Floppy Drive T o insert a diskette, hold it with your left hand, between your thumb and your other fingers, and push it toward the [...]

Using the Panel PC 23 Chapter 3 3.3 CD-ROM Drive T o insert a CD-ROM disc, press the eject button of the CD-ROM drive. The yellow activity light will flash and the front panel will come out a short distance. Using your fingertips, hold the top and bottom of the front panel and pull it outward to the very end. (See Fig 3-2.) Align the center hole of[...]

24 PPC-150 User's Manual 3.4 PCMCIA PCMCIA cards are inserted and ejected in much the same way as diskettes. T o insert a PCMCIA card, align the card with the socket and slide the card into the socket until it locks into place. Note that some PCMCIA memory cards must be prepared by your operating system before you can use them for data storage[...]

Using the Panel PC 25 Chapter 3 Figure 3-4: Using the I/O interface (upper level ports excluding COM ports) USB keyboard Printer Network PS/2 mouse[...]

26 PPC-150 User's Manual Figure 3-5: Using the I/O interface (lower level ports and COM ports) Microphone Headphones CD-ROM player Joystick CRT monitor Serial mouse[...]

Using the Panel PC 27 Chapter 3 3.5 PS/2 Mouse and Keyboard If you wish to use a full-size desktop keyboard and PS/2 mouse with your panel PC, follow these instructions: 1. Be sure the panel PC is turned of f. 2. Connect the Y-shaped adapter to the PS/2 mouse and keyboard port on the rear bottom side of the rear cover . (See Fig. 3-4 and Fig. 2-6.)[...]

28 PPC-150 User's Manual Figure 3-6: PCI/ISA bus expansion PCI/ISA bus card Metal plate PCI/ISA expansion slot cover[...]

Using the Panel PC 29 Chapter 3 3.7 Parallel Port The panel PC supports the latest EPP and ECP parallel port protocols for improved performance and versatility with compatible printers or other devices. T o connect the panel PC to a printer or other devices: 1. Be sure both the panel PC and the printer/devices are turned of f. 2. Connect the 25-pin[...]

30 PPC-150 User's Manual 3.9 VGA Port An external VGA-compatible device may be connected to the system through the 15-pin external port located on the rear of the system unit. The panel PC simultaneously supports an external CR T monitor in addition to its own LCD display . 1. Be sure the panel PC is turned of f. 2. Connect the external monito[...]

Using the Panel PC 31 Chapter 3 3.12 Audio Interface The audio interface includes three jacks: microphone in, line out and line in. (See Fig. 3-5.) Their functions are: Microphone in: Use an external microphone to record voice and sound. Line out: Output audio to external devices such as speakers or earphones. Line in: Input audio from an external [...]

32 PPC-150 User's Manual 3.15 T ouchscreen (Optional) The touchscreen is connected to COM4. Its function is similar to that of a mouse. The only dif ference is that you put your fingertip on the screen to move the cursor . Y ou will need to install the touchscreen driver before it will work. The touchscreen drivers for various operating system[...]

4 Hardware Installation and Upgrading  Overview of Hardware Installation and Upgrading  Disassembling the Panel PC  Installing the 2.5" Hard Disk Drive (HDD)  Installing the Central Processing Unit (CPU)  Installing the SDRAM Memory Module  Installing the Floppy Disk Drive (FDD)  Installing the CD-ROM Drive CHAPTER[...]

34 PPC-150 User's Manual 4.1 Overview of Hardware Installation and Upgrading The panel PC consists of a PC-based computer that is housed in a plastic rear panel and a shielding case. Y our HDD, SDRAM, power supply , CPU, and so on are all readily accessible by removing the rear panel and shielding case. Any maintenance or hardware upgrades can[...]

Chapter 4 Hardware Installation and Upgrading 35 4.2 Disassembling the Panel PC The following are standard procedures for disassembling the panel PC before you upgrade your system. All procedures are illustrated in Fig. 4-1. 1. Unscrew the seven screws that secure the rear cover , then remove the cover . 2. Unscrew the two screws of the PCI/ISA exp[...]

36 PPC-150 User's Manual Figure 4-1: Disassembling the rear panel of the panel PC PCI/ISA expansion PCB Side panel CPU cover Rear panel[...]

Chapter 4 Hardware Installation and Upgrading 37 4.3 Installing the 2.5" Hard Disk Drive (HDD) Y ou can attach one enhanced Integrated Device Electronics (IDE) hard disk drive to the panel PC's internal controller which uses a PCI local-bus interface. The advanced IDE controller supports faster data transfer and allows the IDE hard drive [...]

38 PPC-150 User's Manual 4.4 Installing the Central Processing Unit (CPU) The panel PC's central processing unit (CPU) can be upgraded to improve system performance. The panel PC provides one 321-pin ZIF (Zero Insertion Force) socket (Socket 7) which is backward compatible with ZIF Socket 5 processors. The CPU must come with an attached h[...]

Chapter 4 Hardware Installation and Upgrading 39 10. Connect the power cable of the CPU fan to the 2-pin connector (J12). 1 1. After changing the CPU, you must set jumpers, including those for the PCI bus clock (JP8), system/PCI clock (JP1 1), frequency ratio (JP14), and voltage (JP13). (See Section 5.2.) 12. T o remove the CPU, pull the lever out [...]

40 PPC-150 User's Manual 4.5 Installing the SDRAM Memory Module Y ou can install from 16 MB to 128 MB of SDRAM memory . The panel PC system provides one 168-pin DIMM (Double Inline Memory Module) socket and supports 3.3 V SDRAM with a minimum speed of 12 ns. Note: The module can fit into the sock et only one wa y . Pin 1 of the DIMM module mus[...]

Chapter 4 Hardware Installation and Upgrading 41 4.6 Installing the Floppy Disk Drive (FDD) Installation of a floppy disk drive is similar to that for a hard disk drive. The metal plate for holding the FDD is on the left side of the shielding case. The 26-pin yellow FPC cable is for connecting the FDD. Only 3.5" floppy disk drives (720 KB and [...]

42 PPC-150 User's Manual 4.7 Installing the CD-ROM Drive The compact CD-ROM drive used in the panel PC is not the common 5.25" CD-ROM drive seen in computer shops. It is the kind widely used in notebook computers. Install the CD-ROM drive as follows: 1. Detach and remove the rear cover , side panel and CPU cover . 2. Fasten the retaining [...]

5 Jumper Settings and Connectors This chapter tells how to set up the panel PC hardware, including instructions on setting jumpers and connecting peripherals, switches and indicators. Be sure to read all the safety precautions before you begin the installation procedures.  Jumpers and Connectors  CPU Installation and Upgrading  COM Port In[...]

44 PPC-150 User's Manual 5.1 Jumpers and Connectors 5.1.1 Setting jumpers Y ou can configure your panel PC to match the needs of your application by setting jumpers. A jumper is the simplest kind of electrical switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect [...]

Chapter 5 Jumper Settings and Connectors 45 5.1.2 Jumpers The motherboard of the panel PC has a number of jumpers that allow you to configure your system to suit your applications. The table below lists the function of each of the board s jumpers. Table 5-1: Jumpers and their functions Label Function JP1 COM3 RI pin setting (Reserved) JP2 COM4 R[...]

46 PPC-150 User's Manual 5.1.3 Locating jumpers Figure 5-1: Locating jumpers on the PPC-150 motherboard JP17: CMOS clear for internal RTC JP15: Watchdog timer action JP16: Reset JP12: CMOS clear for external RTC JP4: COM2 RS-232/422/485 setting JP3: COM2 RS-232/422/485 setting JP1: COM3 RI pin setting (Reserved) JP2: COM4 RI pin setting (Reser[...]

Chapter 5 Jumper Settings and Connectors 47 5.1.4 Connectors On-board connectors link the panel PC to external devices such as hard disk drives or floppy drives. The table below lists the function of each of the board s connectors. Table 5-2: Panel PC connectors Label Function J1 IR connector (Reserved) J2 Flat panel display connector J3 Flat pa[...]

48 PPC-150 User's Manual 5.1.5 Locating connectors Figure 5-2: Locating connectors on the PPC-150 motherboard J15: Internal speaker connector (Reserved) J16: Inverter power connector J12: Fan power connector J4: Internal COM4 connector J3: Flat panel display connector J1: IR connector (Reserved) J2: Flat panel display connector J5: T ouchscree[...]

Chapter 5 Jumper Settings and Connectors 49 5 . 2 CPU Installation and Upgrading Y ou can upgrade to a higher power Pentium ® , AMD or Cyrix processor at any time. Simply remove the old CPU, install the new one, and set the jumpers for the new CPU type and speed. 5.2.1 System clock setting (JP1 1, JP8) JP1 1 and JP8 are used to set the CPU and PCI[...]

50 PPC-150 User's Manual Table 5-3: System/PCI clock setting (JP11) PCI clock CPU clock 25 MHz 50 MHz 30 MHz 60 MHz 33 MHz 66 MHz 28 MHz 55 MHz 38 MHz 75 MHz 42 MHz 83 MHz (Reserved) 1 1 1 1 1 1[...]

Chapter 5 Jumper Settings and Connectors 51 Table 5-4: PCI bus clock setting (JP8) PCI clock * CPUCLK/2 32MHz * default setting 5.2.2 CPU core voltage setting (JP13) JP13 must be set to match the CPU type. The following chart shows the proper jumper settings for their respective V CC (CORE) . (The V CC (I/O) for the CPU is fixed at 3.3 V .) 1 1[...]

52 PPC-150 User's Manual Table 5-5: CPU voltage setting (JP13) V CC (CORE) V CC (CORE) V CC (CORE) V CC (CORE) 1.30 V 1.35 V 1.40 V 1.45 V 1.50 V 1.55 V 1.60 V 1.65 V 1.70 V 1.75 V 1.80 V 1.85 V 1.90 V 1.95 V 2.00 V 2.05 V 10 2 4 6 8 9 1 3 7 10 2 4 6 8 9 1 3 5 7 10 2 4 6 8 9 1 3 5 7 10 2 4 6 8 9 1 3 5 7 10 2 4 6 8 9 1 3 5 7 10 2 4 6 8 9 1 3 5 [...]

Chapter 5 Jumper Settings and Connectors 53 V CC (CORE) V CC (CORE) V CC (CORE) V CC (CORE) NONE 2.10 V 2.20 V 2.30 V 2.40 V 2.50 V 2.60 V 2.70 V 2.80 V 2.90 V 3.00 V 3.10 V 3.20 V 3.30 V 3.40 V 3.50 V 9 1 3 5 7 10 2 4 6 8 9 1 3 5 7 10 2 4 6 8 9 1 3 5 7 10 2 4 6 8 9 1 3 5 7 10 2 4 6 8 9 1 3 5 7 10 2 4 6 8 9 1 3 5 7 10 2 4 6 8 9 1 3 5 7 10 2 4 6 8 9[...]

54 PPC-150 User's Manual 5.2.3 CPU frequency ratio setting (JP14) Table 5-6: CPU frequency ratio (for Intel) (JP14) P55C P54C 3.5x 1.5x 2x 2x 3x 3x 2.5x 2.5x 1 3 5 2 4 6 1 3 5 2 4 6 1 3 5 2 4 6 1 3 5 2 4 6[...]

Chapter 5 Jumper Settings and Connectors 55 Table 5-7: CPU frequency ratio (for AMD K6, K6-2) (JP14) 2 x 2.5x 3x 3.5x 4x 4.5x 5x 5.5x 1 3 5 2 4 6 1 3 5 2 4 6 1 3 5 2 4 6 1 3 5 2 4 6 1 3 5 2 4 6 2 4 6 1 3 5 2 4 6 1 3 5 2 4 6 1 3 5[...]

56 PPC-150 User's Manual 5.2.4 CMOS clear for external RTC (JP12) W arning: T o av oid damaging the computer , alwa ys tur n off the pow er supply bef ore setting “Clear CMOS”. Set the jumper back to “3.0 V Battery On” bef ore turning on the pow er supply . Table 5-8: Clear CMOS/External RTC (JP12) * normal operation Clear CMOS * defau[...]

Chapter 5 Jumper Settings and Connectors 57 5.2.6 Reset system (JP16) Table 5-10: Reset system (JP16) * open = normal operation closed = reset system * default setting 2 2 1 1[...]

58 PPC-150 User's Manual 5.3 COM-port Interface The panel PC provides four serial ports (COM1, 3, 4: RS-232; COM2: RS- 232/422/485) in one COM port connector . 5.3.1 COM2 RS-232/422/485 setting (JP3, JP4, JP5) COM2 can be configured to operate in RS-232, RS-422, or RS-485 mode. This is done via JP3, JP4 and JP5. Table 5-11: COM2 RS-232/422/485[...]

Chapter 5 Jumper Settings and Connectors 59 COM1 and COM2 are one set. Y ou can exchange the address range and interrupt IRQ of COM1 for the address range and interrupt IRQ of COM2. After exchanging, COM1's address range is 2F8 ~ 2FF and its request IRQ is IRQ3: and COM2's address range is 3F8 ~ 3FF and its interrupt IRQ is IRQ4. COM3 and[...]

60 PPC-150 User's Manual 5 . 4 VGA Interface The panel PC's s PCI SVGA interface can drive conventional CR T displays and is capable of driving a wide range of flat panel displays, including electroluminescent (EL), gas plasma, passive LCD and active LCD displays. The board has two connectors to support these displays simultaneously; o[...]

Chapter 5 Jumper Settings and Connectors 61 5.4.2 Panel type select (JP9) Table 5-17: Panel type select (JP9) Maximum Display Maximum Display Resolution T ype Resolution T ype 1. 1024 x 768 DSTN color 2. 1280 x 1024 TFT color 3. 640 x 480 DSTN color 4. 800 x 600 DSTN color 5. 640 x 480 SHARP TFT color 6. 640 x 480 18-bit TFT color 7. 1024 x 768 TFT[...]

62 PPC-150 User's Manual Maximum Display Maximum Display Resolution T ype Resolution T ype 9. 800 x 600 TFT color 10. 800 x 600 TFT color (44 K BIOS only) 11. 800 x 600 DSTN color 12. 800 x 600 DSTN color (44 K BIOS only) 13.1024 x 768 TFT color 14. 1280 x 1024 DSTN color (44 K BIOS only) (44 K BIOS only) 15. 1024 x 600 TFT color 16. 1024 x 60[...]

Chapter 5 Jumper Settings and Connectors 63 5.5 W atchdog Timer Configuration An on-board watchdog timer reduces the chance of disruptions which EMP (electromagnetic pulse) interference can cause. This is an invaluable protective device for standalone or unmanned applications. Setup involves one jumper and running the control software. (Refer to Ap[...]

64 PPC-150 User's Manual[...]

6 PCI Bus Ethernet Interface This chapter provides information on Ethernet configuration.  Introduction  Installation of Ethernet Driver - Installation for MS-DOS & WINDOWS 3.1 - Installation for WINDOWS 95/98 - Installation for WINDOWS NT  Further Information CHAPTER[...]

66 PPC-150 User's Manual 6.1 Introduction The PPC-150 is equipped with a high performance 32-bit Ethernet chipset which is fully compliant with IEEE 802.3 100 Mbps CSMA/CD stan- dards. It is supported by major network operating systems. It is also both 100Base-T and 10Base-T compatible. The medium type can be config- ured via the RSET8139.exe [...]

Chapter 6 PCI Bus Ethernet Inter face 67 6.2.1 Installation for MS-DOS & WINDOWS 3.1 If you want to set up your Ethernet connection under the MS-DOS or W indows 3.1 environment, you should first check your server operation system. For example, MS-NT , IBM-LAN server ,Netware and so on. Then choose the correct driver to install in your panel PC.[...]

68 PPC-150 User's Manual 6.2.2 Installation for WINDOWS 95 4. 2. 3. 1. a.Se lect " Start ", " Set tin gs ", " Cont rol Pa nel ", and " Ne twork " ic on. b. C lick " Add " but ton. a. S ele ct " Adapter ", and then c lick " OK" bu tton. a. S ele ct " Start ", "[...]

Chapter 6 PCI Bus Ethernet Inter face 69 8. 5. a. Type the path " D: L AN W I N9 5 ". b. Cl ick " OK " bu tton. 6. 7. a.Ch oose th e li ghtene d " R ealtek. .. " item. b. Cl ick " OK " butt on. a. Pres s " A dd.. . " button to sel e ct suital be serv ices or pro tocal. b. Pres s " OK " [...]

70 PPC-150 User's Manual 6.2.3 Installation for WINDOWS 98 1. a. Sel ect " Sta rt ", " Set tin gs ", " Control P anel ", " Syst e m ". b. Click " Device Manager ", " Other Dev ices " item. c. Remov e " PCI Et hern et Con tro ller " item. 2. a. Sel ect " St art ", &[...]

Chapter 6 PCI Bus Ethernet Inter face 71 8. 5. a. T y p e the path " D:LANWIN9 8 ". b. Click " OK " butt on. 6. a.Choos e the lig htened " Rea ltek.. . " item. b. Click " OK " button . 7. a. Pr ess " OK " butt on t o resta rt y our comput er. b. A fter re booting, win98 c an reco gnise R TL81 39 a[...]

72 PPC-150 User's Manual 6.2.4 Installation for WINDOWS NT 1. a. Sel ec t " St a r t ", " Settings ", " Co n tr ol Pa n e l ", and then double cl ick " Net w o r k " icon. b. Choose the " Ad a p te r s " label. c. Click t he " Ad d " button. 2. a.Pr es s " Have D is k ... " [...]

Chapter 6 PCI Bus Ethernet Inter face 73 5. a. Choo se s uitabl e RTL 8 13 9 D uplex mode for y our application . b. Click " OK " button . 6. a. F ini s h ne t work c o nf ig ur at i on , an d th en click th e " OK " bu tton. 7. a. Pr ess " Yes " button to resta rt y our computer. end[...]

74 PPC-150 User's Manual 6.3 Further Information Realtek web: www .realtek.com.tw Advantech web: www .advantech-usa.com or www .advantech.com.tw[...]

7 PCI SVGA Setup  Introduction  Installation of SVGA Driver - Installation for WINDOWS 3.1 - Installation for WINDOWS 95/98 - Installation for WINDOWS NT - Installation for OS/2  Further Information CHAPTER[...]

76 PPC-150 User's Manual 7.1 Introduction The PPC-150 has an on-board PCI flat panel/VGA interface. The specifi- cations and features are described as follows: Chipset The PPC-150 uses a C&T 65555 chipset for its PCI/SVGA controller . It supports many popular LCD, EL, and gas plasma flat panel displays and conventional analog CR T monitors[...]

Chapter 7 PCI SVGA Setup 77 7.2 Installation of SVGA driver Complete the following steps to install the SVGA driver . Follow the procedures in the flow chart that apply to the operating system that you you are using within your PPC-150. Impor tant: The f ollowing windows illustr ations are examples only . Y ou m ust f ollow the flo w char t instruc[...]

78 PPC-150 User's Manual 7.2.1 Installation for Windows 3.1[...]

Chapter 7 PCI SVGA Setup 79[...]

80 PPC-150 User's Manual 7.2.2 Installation for Windows 95/98[...]

Chapter 7 PCI SVGA Setup 81[...]

82 PPC-150 User's Manual[...]

Chapter 7 PCI SVGA Setup 83 7.2.3 Installation for Windows NT[...]

84 PPC-150 User's Manual[...]

Chapter 7 PCI SVGA Setup 85[...]

86 PPC-150 User's Manual 7.2.4 Installation for OS/2[...]

Chapter 7 PCI SVGA Setup 87[...]

88 PPC-150 User's Manual 7.3 Further Information For further information about the PCI/SVGA installation in your PPC-150, including driver updates, troubleshooting guides and F AQ lists, visit the following web resources: C&T web site: www .chips.com Advantech web sites: www .advantech.com www .advantech.com.tw[...]

8 Audio  Introduction  Installation of Audio Driver - Installation for MS-DOS & WINDOWS 3.1 - Installation for WINDOWS 95/98 - Installation for WINDOWS NT - Installation for OS/2 CHAPTER[...]

90 PPC-150 User's Manual 8.1 Introduction The PPC-150 on-board audio interface provides high-quality stereo sound and FM music synthesis (ESFM) by using the ES1869 audio controller from ESS T echnology , Inc. The audio interface can record, compress, and play back voice, sound, and music with a built-in mixer control. The PPC-150 on board audi[...]

Chapter 8 Audio 91 8.2.2 Changing settings in DOS The audio controller settings can be changed in the DOS environment by using the DOS SETUP utility located in the UTILITY subdirectory of the CD-ROM. T o change the settings, simply type DOSSET at the DOS prompt. Follow the instructions on screen to choose the new settings for the ES1869 audio contr[...]

92 PPC-150 User's Manual 8.2.3 Controlling volume in DOS The ES1869 audio controller provides software control of the settings for audio volumes. The VOLUME CONTROL utility located in the UTILITYAudio subdirectory of the CD-ROM is used to control the volume settings in DOS. T o control the volume settings, simply type "ESSVOL" at t[...]

Chapter 8 Audio 93 8.2.4 Installation for WINDOWS 3.1 Note: The f ollowing windows illustr ations are examples only . Y ou m ust f ollow the flo w char t instructions and pay attention to the instructions which then appear on your screen.[...]

94 PPC-150 User's Manual 8.2.5 Installation for WINDOWS 95/98 4. a. Press " Have Disk... " button . 2. a. Sel ect " No " , an d th en clic k " Next " button. 3. a. Choose " Sou nd, Vi deo and g ame controlle rs " item. b. Cl ick " Next " bu tton. 1. a. R emo ve i tems rel ate d to ESS186 9 in &[...]

Chapter 8 Audio 95 8. a. P ress " Yes " button to start y our compute r. 6. a. S elect " ES1 869 Contr ol inter face " item. b. Pres s " Ok " button . 7. a. Inse rt "W in dows 9 5" CD-ROM to loa d re lated f iles. b. C lick " OK " button . 5. a. In sert " Drivers a nd Utilit ies " CD-ROM. [...]

96 PPC-150 User's Manual 8.2.6 Installation for WINDOWS NT 1. a. Se lect " Sta r t ", " Sett ing s ", " Cont ro l Pan el ". b. D oub le click " Mu lt imed ia " ic o n. 3. a. Choos e " Un li s te d or Upd at e d D r iver " ite m . b. Cl i ck th e " OK " b utto n. 2. a. Se lect the &quo[...]

Chapter 8 Audio 97 5. a. Select the highlighted ESS item. b. Press t he " Ok " button. 4. a. Inser t "Drivers and Utilities " CD-ROM. b. Type the path " D:AudioNT40 " c. Click " OK " button. 6. a. Press t he " Restart Now " button to reboot your com puter. END[...]

98 PPC-150 User's Manual[...]

9 Award BIOS Setup This chapter describes how to set BIOS configuration data. CHAPTER[...]

100 PPC-150 User's Manual 9.1 A ward BIOS Setup The PPC-150 comes with an A ward BIOS chip that contains the ROM setup for your system. This chip serves as an interface between the processor and the rest of the mainboard's components. This chapter explains the information contained in the setup program and tells you how to modify the sett[...]

Chapter 9 Award BIOS Setup 101 A setup program, built into the system BIOS, is stored in the CMOS RAM that allows the configuration settings to be changed. This program is executed when the user changes the system configuration; when the user changes the system backup battery; or when the system detects a configuration error and asks the user to ru[...]

102 PPC-150 User's Manual 9.3.1 Hard Disk Configurations TYPE: Select from 1 to 45 to fill the remaining fields with predefined values for disk drives. Select "User" to fill the remaining fields. Select "Auto" to detect the HDD type automatically . SIZE: Hard disk size. The unit is megabytes (MB). CYLS: The cylinder number [...]

Chapter 9 Award BIOS Setup 103 9.4 BIOS Features Setup Figure 9-3: BIOS features setup screen Moving around the BIOS Features and Chipset Features setup programs works the same way as moving around the Standard CMOS setup program. (Refer to the next section for Chipset Features setup.) The BIOS Features setup program is shown above. Users are not e[...]

104 PPC-150 User's Manual External Cache When enabled, supports an external cache SRAM. The options are: Enabled (Default), Disabled. Quick Power On Self Test When enabled, allows the BIOS to bypass the extensive memory test. The options are: Disabled (Default), Enabled. Boot Sequence Allows the system BIOS to first try to boot the operating s[...]

Chapter 9 Award BIOS Setup 105 Typematic Rate (Chars/Sec) Sets the rate of a character repeat when the key is held down. The options are: 6 (Default), 8, 10, 12, 15, 20, 24, 30. Typematic Delay (msec) Sets the delay time before a character is repeated. The options are: 250 (Default), 500, 750, 1000 milliseconds. Security Option Allows you to set th[...]

106 PPC-150 User's Manual 9.5 Chipset Features Setup Note: It is strongly recommended that setup items in this section NO T be changed, because advanced knowledge is required to eff ect such changes. Figure 9-4: Chipset features setup screen System BIOS Cacheable When enabled, allows the ROM area FOOOH-FFFFH to be cacheable when the cache cont[...]

Chapter 9 Award BIOS Setup 107 Memory Hole at 15M-16M When enabled, the memory hole at the 15 MB address will be relocated to the 15 ~ 16 MB address range of the ISA cycle when the processor accesses the 15 ~ 16 MB address area. When disabled, the memory hole at the 15 MB address will be treated as a DRAM cycle when the processor accesses the 15 ~ [...]

108 PPC-150 User's Manual PM Control by APM The option "No" allows the BIOS to ignore the APM (Advanced Power Management) specification. Selecting "Y es" will allow the BIOS to wait for APM's prompt before it enters Doze mode, Standby mode, or Suspend mode. If the APM is installed, it will prompt the BIOS to set the sy[...]

Chapter 9 Award BIOS Setup 109 Hot Key Power Off This function is designated as "Disabled". HDD Off After Selecting "Disabled" will turn of f the hard disk drive (HDD) motor . Selecting "1 Min.. 15 Min" allows you to define the HDD idle time before the HDD enters Power Saving Mode. The options "1 Min.. 15 Min"[...]

110 PPC-150 User's Manual HDD Ports Activity Selecting "Enabled" will enable the power management timer when a no activity event is detected in the hard disk drive. Selecting "Disabled" will disable the PM timer even if a no activity event is detected. The options are: Enabled (Default), Disabled. VGA Activity Selecting &qu[...]

Chapter 9 Award BIOS Setup 111 Note: Under cer tain operating systems such as Windoes NT 4.0 (Build 1381), the CD auto-inser tion f eature might hav e some eff ect on power management. It is recommended that the CD-ROM driv e use the secondar y channel, and that the follo wing P ower Management Setup features be set: HDD & FDD: Off IRQ15 (Reser[...]

112 PPC-150 User's Manual Reset Configuration Data When enabled, this feature allows the system to clear the last BIOS configuration data and then reset the data with the default BIOS configuration data. The options are: Disabled (Default), Enabled. PCI IRQ Activated By If your IDE card is triggered by edge, set it at "Edge". The opt[...]

Chapter 9 Award BIOS Setup 113 9.8 Load BIOS Defaults Figure 9-7: Load BIOS defaults screen The BIOS defaults screen contains the most appropriate values of the system parameters that allow minimum system performance. 9.9 Load Setup Defaults Selecting this field loads the factory defaults for BIOS and Chipset Features. The system will automatically[...]

114 PPC-150 User's Manual 9.10 Integrated Peripherals Figure 9-8: Integrated peripherals screen Internal PCI/IDE When you select "Both", two PCI/IDE ports will be enabled. If you select "Disabled", both PCI/IDE ports will be enabled. Y ou can also select one of two ports to be enabled by selecting "Primary" or &qu[...]

Chapter 9 Award BIOS Setup 115 PIO means Programmed Input/Output. Rather than having the BIOS issue a series of commands to ef fect a transfer to or from the disk drive, PIO allows the BIOS to tell the controller what it wants and then let the controller and the CPU perform the task by themselves. Y our system supports five modes, numbered from 0 t[...]

116 PPC-150 User's Manual WDT Active When Power ON This is Advantech's patented watchdog function which can reboot the system should the computer hang in the BIOS checkup. The options are: 63 sec (Default), Disabled, 31 sec, 15 sec. Onboard Serial Ports 1 & 2 If the serial ports use the onboard I/O controller , you can modify your ser[...]

Chapter 9 Award BIOS Setup 117 ECP Mode Use DMA Y ou can choose different DMA modes for data transfer . The options are: 3 (Default), 1. PS/2 mouse function When enabled, the PS/2 mouse is activated. The options are: Disabled (Default), Enabled. USB Controller When enabled, the USB devices are activated. The options are: Disabled (Default), Enabled[...]

118 PPC-150 User's Manual ROM PC I/ISA BIOS (2A 5IIAKA) IDE HD D AUTO DET ECTI ON HARD D ISK TY PE SIZE CY LS. HE ADS PREC OMP LA NDZ SECTOR S MODE DRIVE C: (MB) 79 0 15 6 5535 789 5 7 Note: Some OSs (su ch as SCO- UNIX) must us e NORMAL for AWARD SOFTWARE, INC. SELECT SECO NDARY SLAVE OPTION (N=Sk ip): N . instal lation 9.12 IDE HDD Aut[...]

Chapter 9 Award BIOS Setup 119 9.13 Save and Exit Setup Figure 9-10: Save and exit setup screen After you have made changes in the BIOS setup, press "Esc" to return to the main menu. Move the cursor to "Save and Exit Setup", or press "F10" and then press "Y", to change the CMOS Setup. If you did not change an[...]

120 PPC-150 User's Manual[...]

10 T ouchscreen  Introduction  Installation of T ouchscreen Driver - Installation for MS-DOS & WINDOWS 3.1 - Installation for WINDOWS 95/98 - Installation for WINDOWS NT - Installation for OS/2 CHAPTER[...]

122 PPC-150 User's Manual 10.1 Introduction 10.1.1 General information The PPC-150's optional touchscreen incorporates advanced second-generation 5-wire resistive or surface acoustic wave technology . They allow 75% and 91% light transmission respectively . The resistive model has an antiglare surface, but the SA W model has not. Anyway ,[...]

Chapter 10 T o uchscreen 123 Chemical Resistance: The active area of the touchscreen is resistant to the following chemicals when exposed for a period of one hour at a temperature of 21° C (71° F): - Acetone - Methylene chloride - Methyl ethyl ketone - Isopropyl alcohol - Hexane - Ammonia-based glass cleaners - Turpentine - Mineral spirits - Food[...]

124 PPC-150 User's Manual[...]

Chapter 10 T o uchscreen 125[...]

126 PPC-150 User's Manual[...]

Chapter 10 T o uchscreen 127[...]

128 PPC-150 User's Manual 10.2.2 Installation for WINDOWS 95/98 If you want to use the touchscreen driver CD-ROM accompanying your panel PC, refer to the following flow chart instructions.[...]

Chapter 10 T o uchscreen 129 1. 2. 3. 4. a. In sert the "D river s and U tilities v 2.0" CD-ROM. b. C li ck "Sta rt" bu tt on, an d th en "R un". c. Type the path "D:elotouchwin95 setu p". a. Select " Smart serial controlle r on C OM 4" item . b. Press "Ok" button. a. C li ck "Y es[...]

130 PPC-150 User's Manual 10.2.3 Installation for WINDOWS NT a. Press the "Next" button. a. Set the directory path. 1. 2. 3. 4. a. Choose "Typical". a. Insert the "Drivers and Utilities" CD-ROM. b. Select "Start", "Run". c. Type the path. eg. "D:Elotouch monmousewinnt setup.exe" D[...]

Chapter 10 T ouchscreen 131 5. 6. 7. 8. a. Click "OK" but do not reboot. a. Choose the COM port which is not used by other devices. Click "OK". b. a. From the left window, select: "Hkey_Local_Machine" "System", "CurrentControlSet", "Services", "Monmouse", "Parameters". [...]

132 PPC-150 User's Manual[...]

Chapter 10 T ouchscreen 133 10.2.4 Installation for OS/2 (MonitorMouse) BEFORE YOU BEGIN First be sure OS/2 is installed and operating properly with your mouse. As you will be modifying the CONFIG.SYS file, it is best to have the OS/2 installation disks or a bootable DOS disk readily available. This way , any problems in CONFIG.SYS which cause the [...]

134 PPC-150 User's Manual STEP 2 - COPY THE SOFTWARE The following files are on the MonitorMouse for OS/2 disk: !READ.ME! T ext file containing any additions or changes made after this manual was printed. MONMOU01.SYS T ouchscreen driver for serial touchscreen controllers on PC bus systems. MONMOU02.SYS T ouchscreen driver for serial touchscre[...]

Chapter 10 T ouchscreen 135 STEP 3 - MODIFY CONFIG.SYS MonitorMouse for OS/2 is installed by commands in CONFIG.SYS. Use your system editor to make these changes. In general, the changes are as follows: 1. Comment-out the existing DEVICE command(s) for your mouse. 2. Add a DEVICE command for the appropriate MonitorMouse for the OS/2 touchscreen dri[...]

136 PPC-150 User's Manual Example MonitorMouse for OS/2 DEVICE command: Device=c:elomonmou01.sys 2210,1,9600 No Mouse If you do not wish to have a mouse connected, change the stype=elomou$ flag to type=elomou$ on the DEVICE=MOUSE.SYS command. Disabling the COM Drivers If your system COM ports are being used by the touchscreen and[...]

Chapter 10 T ouchscreen 137 STEP 4 - INSTALL THE TOUCHSCREEN CONTROL PANEL The touchscreen control panel software program, ELOCAL2.EXE, is a presentation manager application for calibrating the touchscreen and setting various options. Add the ELOELOCAL2.EXE program to the System Setup folder and label the icon T ouchscreen. This is accompli[...]

138 PPC-150 User's Manual[...]

Appendix A LCD Specifications and Selection Settings 138 LCD Specifications and Selection Settings APPENDIX A[...]

140 PPC-150 User's Manual T able A-1: PPC-150 series LCD specifications * The VR control knobs are located on the I/O section on the rear cover of the panel PC. Note: The color LCD displa y installed in the panel PC is high-quality and reliable . Howe ver , it may contain a f e w def ectiv e pix els which ma y not alw a ys illuminate . With cu[...]

B Programming the Watchdog Timer The PPC-150 is equipped with a watchdog timer that resets the CPU or generates an interrupt if processing comes to a stand- still for any reason. This feature ensures system reliability in industrial standalone or unmanned environments. APPENDIX[...]

142 PPC-150 User's Manual Programming the W atchdog Timer T o program the watchdog timer , you must write a program which writes I/O port address 443 (hex). The output data is a time interval value. The value range is from 01 (hex) to 3F (hex), and the related time interval is from 1 sec. to 63 sec. Data Time Interval 01 1 sec. 02 2 sec. 03 3 [...]

Appendix B Programming the Watchdog T imer 143 The following example shows how you might program the watchdog timer in BASIC: 10 REM Watchdog timer example program 20 OUT &H443, data REM Start and restart the watchdog 30 GOSUB 1000 REM Your application task #1, 40 OUT &H443, data REM Reset the timer 50 GOSUB 2000 REM Your application task #[...]

144 PPC-150 User's Manual[...]

C Full Disassembly Procedures APPENDIX[...]

146 PPC-150 User’ s Manual If you want to completely disassemble the panel PC, follow the step-by-step procedures below . Users should be aware that Advantech Co., Ltd. takes no responsibility whatsoever for any problems or damage caused by the user disassembly of the panel PC. Make sure the power cord of the panel PC is unplugged before you star[...]

Appendix C Full Disassembly Procedures 147 Figure C-1: Steps 1 - 4 Step 1 & Step 2 Step 4 Step 3[...]

148 PPC-150 User’ s Manual 5. Unscrew the fourteen screws of the I/O bracket with a hexagonal screwdriver . The EMI protection cover lies below the I/O bracket. Y ou can now remove both the bracket and the cover from the I/O ports. 6. Detach the flat cables of the LCD inverter , touchscreen and LCD from the motherboard. Y ou can remove the mother[...]

Appendix C Full Disassembly Procedures 149 Figure C-2: Steps 5 - 6 Step 5 Step 6 EMI protection cover I/O bracket Motherboard[...]

150 PPC-150 User’ s Manual 7. Unscrew the four screws on the power supply board. The power supply board can be detached from the plastic housing after unplug- ging the cables from the motherboard. 8. Remove the front panel by hand. 9. Unscrew the ten screws on the LCD holding plate to seperate the plastic housing and LCD holding plate.The LCD inv[...]

Appendix C Full Disassembly Procedures 151 Figure C-3: Steps 7 - 12 Step 8 Step 10 Step 1 1 Step 12 Step 7 Step 9 Front panel T ouchscreen Power supply Plastic housing LCD LCD holding plate[...]

152 PPC-150 User’ s Manual[...]

D Pin Assignments  IR Connector (J1) (Reserved)  Flat Panel Display Connector (J2)  Flat Panel Display Connector (J3)  Internal COM4 Connector (J4)  T ouchscreen Power Connector (J5)  Sandisk SSD Connector (J6)  EIDE Hard Disk Drive Connector (J7)  Floppy Drive Connector (J8)  CD-ROM Connector (J9)  CPU Fan Power Conne[...]

154 PPC-150 User’ s Manual IR Connector (J1) (*Reserved) T able D-1: IR Connector (J1) Pin Signal 1V CC 2 Mode_Select 3 IR_IN 4 GND 5 IR_out 12345[...]

Appendix D Pin Assignments 155 T able D-2: Flat Panel Display Connector (J2) Pin Signal Pin Signal 1 +12 V 2 +12 V 3 GND 4 GND 5V DD SAFE 6 V DD SAFE 7 ENA VEE 8 GND 9P 0 1 0 P 1 11 P2 12 P3 13 P4 14 P5 15 P6 16 P7 17 P8 18 P9 19 P10 2 0 P11 21 P12 2 2 P13 23 P14 2 4 P15 25 P16 2 6 P17 27 P18 2 8 P19 29 P20 3 0 P21 31 P22 3 2 P23 33 GND 34 GND 35 S[...]

156 PPC-150 User’ s Manual Flat Panel Display Connector (J3) T able D-3: Flat Panel Display (J3) Pin Signal Pin Signal 1V DD SAFE 2 +5 V 3 P24 4 P25 5 P26 6 P27 7 P28 8 P29 9 P30 1 0 P31 11 P32 12 P33 13 P34 14 P35 15 GND 16 GND Internal COM4 Connector (J4) T able D-4: Internal COM4 Connector (J4) Pin Signal Pin Signal 1 DCD 2 DSR 3R X 4R T S 5 T[...]

Appendix D Pin Assignments 157 T ouchscreen Power Connector (J5) T able D-5: T ouchscreen Power Connector (J5) Pin Signal 1 +5 V 2 GND 1 2[...]

158 PPC-150 User’ s Manual Sandisk SSD Connector (J6) T able D-6: Sandisk SSD Connector (J6) Pin Signal Pin Signal 1 IDE RESET # 2 GND 3D A T A 7 4 D A T A 8 5D A T A 6 6 D A T A 9 7D A T A 5 8 D A T A 1 0 9 D ATA 4 1 0 D ATA 1 1 11 DA T A 3 12 DA T A 12 13 DA T A 2 14 DA T A 13 15 DA T A 1 16 DA T A 14 17 DA T A 0 18 DA T A 15 19 SIGNAL GND 20 N[...]

Appendix D Pin Assignments 159 EIDE Hard Disk Drive Connector (J7) T able D-7: EIDE Hard Disk Drive Connector (J7) Pin Signal Pin Signal 1 IDE RESET # 2 GND 3D A T A 7 4 D A T A 8 5D A T A 6 6 D A T A 9 7D A T A 5 8 D A T A 1 0 9 D ATA 4 1 0 D ATA 1 1 11 DA T A 3 12 DA T A 12 13 DA T A 2 14 DA T A 13 15 DA T A 1 16 DA T A 14 17 DA T A 0 18 DA T A 1[...]

160 PPC-150 User’ s Manual Floppy Drive Connector (J8) T able D-8: Floppy Drive Connector (J8) Pin Signal Pin Signal 1V CC (+5 V) 14 STEP 2 INDEX 15 GND 3V CC (+5 V) 16 WRITE DA T A 4 DRIVE SELECT 17 GND 5V CC (+5 V) 18 WRITE DA T A 6 DISK CHANGE 19 GND 7 NC 20 TRACK 0 8 NC 21 GND 9 NC 22 WRITE PROTECT 10 MOTOR ON 23 GND 11 NC 24 READ DA T A 12 D[...]

Appendix D Pin Assignments 161 CD-ROM Connector (J9) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 T able D-9: CD-ROM Connector (J9) Pin Signal Pin Signal 1 Audio_L 2 Audio_R 3 GND 4 GND 5 IDE RESET # 6 DA T A8 7 DA TA7 8 DA TA9 9 DA T A6 10 DA T A10 11 DA T A5 12 DA T A11 13 DA T A4 [...]

162 PPC-150 User’ s Manual PCI/ISA Bus Expansion Connector (J1 1) side view B1 E1 A1 F1 B2 E2 A2 F2 B3 E3 A3 F3 B4 E4 A4 F4 B5 E5 A5 F5 B6 A6 B8 E8 A8 F8 B7 E7 A7 F7 B9 E9 A9 F9 B10 E10 A10 F10 B11 E11 A11 F11 B12 E12 A12 F12 B13 E13 A13 F13 B14 E14 A14 F14 B15 E15 A15 F15 B16 A16 B17 E17 A17 F17 B18 E18 A18 F18 B19 E19 A19 F19 B20 E20 A20 F20 B2[...]

Appendix D Pin Assignments 163 T able D-1 1: PCI/ISA Slot Pin Assignments (Pins A and B) Pin Signal Pin Signal A1 IOCHK B1 GND A2 SD7 B2 RST A3 SD6 B3 V CC A4 SD5 B4 IRQ9 A5 SD4 B5 -5 V A6 SD3 B6 DRQ2 A7 S D2 B7 -12 V A8 SD1 B8 OWS A9 S D0 B9 +12 V A10 IORDY B 10 GND A11 AEN B11 SMW A12 SA19 B12 SMR A13 SA18 B13 IOW A14 SA17 B14 IOR A15 SA16 B15 DA[...]

164 PPC-150 User’ s Manual T able D-12: PCI/ISA Slot Pin Assignments (Pins C and D) Pin Signal Pin Signal C1 SBHE D1 MEM16 C2 LA23 D2 IO16 C3 LA22 D3 IRQ10 C4 LA21 D4 IRQ11 C5 LA20 D5 IRQ12 C6 LA19 D6 IRQ15 C7 LA18 D7 IRQ14 C8 LA17 D8 DACKO C9 MEMR D9 DRQ0 C10 MEMW D10 DACK5 C11 SD8 D11 DRQ5 C12 SD9 D12 DACK6 C13 SD10 D13 DRQ6 C14 SD11 D14 DACK7 [...]

Appendix D Pin Assignments 165 T able D-13: PCI/ISA Slot Pin Assignments (Pins E and F) Pin Signal Pin Signal E1 GND F1 GND E2 GND F2 GND E3 INT 1 F3 INT3 E4 INT 2 F4 INT4 E5 V CC F5 V CC E6 --- F6 --- E7 V CC F7 V CC E8 RST F8 PCLK2 E9 GNT2 F 9 (V) E10 REQ2 F10 GNT3 E11 GND F11 GND E12 PCLK1 F12 REQ3 E13 GND F13 AD31 E14 AD30 F14 AD29 E15 NC F15 N[...]

166 PPC-150 User’ s Manual T able D-14: PCI/ISA Slot Pin Assignments (Pins G and H) Pin Signal Pin Signal G1 --- H1 SERR G2 --- H2 AD15 G3 CBE1 H3 AD14 G4 P AR H4 AD12 G5 GND H5 GND G6 --- H6 KEY G7 GND H7 GND G8 AD13 H8 AD10 G9 AD11 H9 AD8 G10 AD9 H10 AD7 G11 CBEO H11 AD5 G12 AD6 H12 AD3 G13 AD4 H13 AD1 G14 AD2 H14 AD0 G15 --- H15 KEY G16 V CC H[...]

Appendix D Pin Assignments 167 Fan Power Connector (J12) T able D-15: Fan Power Connector (J12) Pin Signal 1 +12 V 2 GND A T Power Connector (J13) 2 1 12 11 10 9 8 7 6 5 4 3 2 1 T able D-16: A T Power Connector (J13) Pin Signal 1N C 2 +5 V 3 +12 V 4 -12 V 5 GND 6 GND 7 GND 8 GND 9 -5 V 10 +5 V 11 +5 V 12 +5 V[...]

168 PPC-150 User’ s Manual 1234 Internal Speaker Connector (J15) (*Reserved) T able D-18: Internal Speaker Connector (J15) Pin Signal 1 Speaker out_L 2 GND 3 GND 4 Speaker out_R Inverter Power Connector (J16) T able D-19: Inverter Power Connector (J16) Pin Signal 1 +12 V 2 GND 3 ENABKL 4 Brightness Adj. 5 +5 V 1 2 3 4 5[...]

Appendix D Pin Assignments 169 COM2 T able D-20: COM2 Pin Signal RS-232 RS-422 RS-485 1 DCD TX- D A TA- 2 RX TX+ DA T A+ 3 TX RX+ --- 4 DTR RX- --- 5 GND GND --- 6 DSR --- --- 7 RTS --- --- 8 CTS --- --- 9 RI --- --- 1 5 9 6 67 8 9 5 4 3 2 1[...]

170 PPC-150 User’ s Manual[...]

E Mounting Instructions  Introduction  Panel Mounting  Desktop Stand Mounting APPENDIX[...]

172 PPC-150 User’ s Manual E.1 Introduction The PPC-150 can be placed as is on a shelf or table, mounted into a panel, or mounted on a customized desktop stand. E.2 Panel Mounting Panel mounting can help system integrators conveniently integrate the panel PC into their system. T o construct a suitable panel, refer to the following cutout dimensio[...]

Appendix E Mounting Instructions 173 T o mount the PPC-150 into a panel: 1. Remove the front panel. There are ten holes located along the four sides of the panel PC. 2. Insert the screws from the front side into the holes and tighten them with the nuts provided. (See Fig. E-2) 3. Put the front panel back and make sure it stable. Note: The panel thi[...]

174 PPC-150 User’ s Manual E.3 Desktop Stand Mounting The PPC-150 has a customized stand suitable for desktops and other horizontal locations. A unique spring inside the stand enables the panel PC s vertical tilt to be adjusted about 30 degrees. The stand is available from Advantech Co. Follow these procedures to set up the stand: 1. Remove th[...]

Appendix E Mounting Instructions 175 Figure E-3: Desktop stand mounting Rear cover of panel PC Main body Holding plate Base T op cover Cap Rear cover[...]

176 PPC-150 User’ s Manual[...]