AEG F 55402 IM инструкция обслуживания

FAVORIT 55402 VI 0P EN User manual[...]

CONTENTS 1. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3. CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

1. SAFETY INSTRUCTIONS Before the installation and use of the ap- pliance, carefully read the supplied in- structions. The manufa cturer is not re- sponsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the ap pliance for future reference. 1.1 Children and vulnerable people safety WARNING! Risk[...]

WARNING! Dangerous voltage. • If the water inlet hose is damaged, im- mediately disconnect the mains plug from the mains socket. Contact the Service to replace the water inlet hose. 1.3 Use • This appliance is intended to be used in household and similar applications such as: – Staff kitchen areas in shops, offices and other working environm [...]

2. PRODUCT DESCRIPTION 11 1 2 3 4 7 9 5 6 8 10 1 Upper sp ray arm 2 Lower spray arm 3 Filters 4 Rating plate 5 Salt container 6 Air vent 7 Rinse aid dispenser 8 Detergent dispenser 9 Cutler y basket 10 Lower basket 11 Upper basket 2.1 Light beam • When a programme ope rates, a red light beam shows on the floor below the appliance door. When the p[...]

Indicators Description Salt indicator. It is always off while the programme operates. Rinse aid indicator. It is always off while the programme oper- ates. Multitab indicator. 4. PROGRAMMES Pro- gramme 1) Degree of soil Type of load Programme phases Duration (min) Energy (kWh) Water (l) 2) All Crockery, cut- lery, pots and pans Prewash Wash 45 °C [...]

Information for test institutes For all the necessary info rmat ion for t est per forma nce. send a n email to: info.test@dishwasher-productio n.com Write down the product numb er (PNC ) that is on the rating plate. 5. OPTIONS Activate the Multitab option be- fore you set a programme. You cannot activate the option while a programme operates. 5.1 M[...]

water authority to know the wat er hardness in your area. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open the water tap. 5. Processing residues can stay in the appliance. Start a programme to re- move them. Do not use dete rgent and do not load the baskets. 6.1 Adjusting the water softener Water hardness Water softener adjustme[...]

6.2 Filling the salt container 1. Turn the cap counterclockwise and open the salt container. 2. Put 1 litre of water in the salt con- tainer (only for the first time). 3. Fill the salt container with dishwash- er salt. 4. Remove the salt around the opening of the salt container. 5. Turn the cap clockwise to close the salt container. CAUTION! Water [...]

5. Set and start the correct programme for the type of load and the degree of soil. 7.1 Using the detergent 20 30 M A X 1 2 3 4 + - A B C 1. Press the release button ( B ) to open the lid ( C ). 2. Put the detergent in the compart- ment ( A ) . 3. If the programme has a prewash phase, put a small quantity of deter- gent on the inner part of the app[...]

1. Press and hold at the same time but- tons and until all the programme indicators come on. Cancelling the programme 1. Press and hold at the same time but- tons and until all the programme indicators come on. Make sure that there is detergent in the detergent disp enser be- fore you start a new program me. At the end of the programme When the pro[...]

• Put hollow items (cups, glasses and pans) with the opening down. • Make sure that cutlery and dishes do not bond together. Mix spoons with other cutlery. • Make sure that glasses do not touch other glasses. • Put the small items in the cutlery bas- ket. • Put the light items in the upper bas- ket. Make sure that they do not move. • Ma[...]

6. Make sure that the filter ( B ) is cor- rectly positioned under the 2 guides ( C ). 7. Assemble the filter ( A ) and put it back in filter ( B ). Turn it clockwise until it locks. An incorrect position of the filters can cause bad washing results and damage to the appliance. 9.2 Cleaning the spray arms Do not remove the spray arms. If the holes [...]

Problem Possible solution Make sure that the pr essure of the water supply is not too low. For this information, contact your local water authority. Make sure that the water tap is not clogged. Make sure that the filter in the inlet hose is not clogged. Make sure that the inlet hose has no kinks or bends. The appliance does not drain the water. Mak[...]

6. Adjust the released quantity of rinse aid. 7. Fill the rinse aid dispenser. 11. TECHNICAL INFORMATION Dimensions Width / Height / Depth (mm) 446 / 818 - 898 / 550 Electrical connection Refer to the rating plate. Volta ge 220-240 V Frequency 50 Hz Water supply pressure Min. / max. (bar / MPa) (0.5 / 0.05 ) / (8 / 0.8 ) Water supply 1) Cold water [...]

www.aeg.com/shop 117932982-A-212013[...]