AEG F 88400 VI инструкция обслуживания

FAVORIT 88400 I EN DISHWASHER USER MANUAL[...]

CONTENTS 4 SAFETY INSTRU CTIONS 6 PRODUCT DES CRIPTION 7 CONTROL PANE L 8P R O G R A M M E S 10 OPTIONS 11 BEFORE F IRST USE 14 DAILY USE 17 CARE AND CLEANING 18 TROUBLESHO OTING 20 TECHNICAL IN FORMATION ENVIRONMENT CONCERNS Recycle the material s with the symb ol . Put the packaging in applicab le containers to recycle it. Help protect the enviro[...]

FOR PERFECT RESULTS Thank you for choosing this AEG product. We hav e created it to give you impeccable performance for many years , wi th innovative technologies tha t help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading t o get the very best from it. ACCESSORIES AND CONSUMABLES In the A[...]

SAFETY INSTRUCTIONS Before the installation and use of the ap- pliance, carefully read the supplied in- structions. The manufa cturer is not re- sponsible if an incorre ct installation and use causes inju ries and damages. Always keep the instructions with the appliance for future reference. CHILDREN AND VULNERABLE PEOPLE SAFETY WARNING! Risk of su[...]

• Use this appliance in a household envi- ronment. • Do not change the specification of this appliance. • Put knives and cutl ery with sharp points in the cutlery basket with the points down or in a hori zontal position. • Do not keep the appliance door open without supervision to prevent to fall on it. • Do not sit or stand on the open d[...]

PRODUCT DESCRIPTION 11 1 2 3 4 7 9 5 6 8 10 1 Upper spray arm 2 Lower spray arm 3 Filters 4 Rating plate 5 Salt container 6 Water hardness dial 7 Rinse aid dispenser 8 Detergent disp enser 9 Cutlery basket 10 Lower basket 11 Upper basket 6 www.ae g.com[...]

CONTROL PANEL 1 2 3 5 4 6 9 8 7 A B C 1 On/off button 2 Programme guide 3 Program touchpad 4 Programme indicators 5 Display 6 Delay touchpad 7 Start touchpad 8 Indicators 9 Option touchp ad Indicators Description Multitab indicator. ProBoost indicator. Extra Hygiene indicator. Washing phase indicator. Rinsing phase indicator. Drying phase indicator[...]

PROGRAMMES Programme Degree of soil Type of load Programme phases Options 1) All Crockery, cutler y, pots and pans Prewash Wash 45 °C or 70 °C Rinses Dry ÖKO PLUS 2) Heavy soil Crockery, cutler y, pots and pans Prewash Wash 70 °C Rinses Dry ÖKO PLUS ProBoost 3) Normal s oil Crockery and cut- lery Prewash Wash 50 °C Rinses Dry 4) Fresh soil Cr[...]

Consumption v alues Programme 1) Energy (kWh) Water (l) 0.6 - 1.2 7 - 13 1.1 - 1.2 10 - 11 0.8 - 0.9 8 - 9 0.7 7 0.7 - 0.8 8 - 9 0.9 - 1.0 8 - 9 1.1 - 1.2 12 - 13 0.6 - 0.7 8 - 9 1) The display shows the programme duration. The water pressure and temperature, the variations of the mains supp ly, the options and the quantity of dishes can change the[...]

OPTIONS MULTITAB OPTION Activate this option only when you use the combi detergent tablets. This option deactivates the flow of rinse aid and salt. The related indicators are off. The programme durati on can increase. ÖKO PLUS This function decreases the temperature in the drying phase. The en ergy consump- tion decrease s by 25%. The dishes can b[...]

BEFORE FIRST USE 1. Make sure that the set level of the w a- ter softener agrees with the water hardness in your area. If not, adjust the water softener. Contact your local wa- ter authority to know the water hard- ness in you r area. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open the water tap. 5. Processing residu es can sta[...]

Manual adjustment Turn the water hardness dial to the posi- tion 1 or 2. Electronic adjustment 1. Press the on/off button to activate the appliance. 2. Make sure that the appliance is in set- ting mode. Refer to ‘SETTING AND STARTING A PROGRAMME’. 3. Press and hold Delay and Start at the same time until the indicators ( A ), ( B ) and ( C ) fla[...]

FILLING THE RINSE AID DISPENSER M A X 1 2 3 4 + - A B D C CAUTION! Only use rinse aid for dishwas hers. Other products can cau se dam- age to the applianc e. The rinse aid, during the last rins- ing phase, helps to dry the dishes without streaks and stains. 1. Press the release button ( D ) to ope n the lid ( C ). 2. Fill the rinse ai d dispenser ([...]

DAILY USE 1. Open the water tap. 2. Press the on/off button to activate the appliance. Make su re that the appli- ance is in setting mode. Refer to ’S ET- TING AND STARTING A PRO- GRAMM E’. • If the salt indicator is on, fill the salt container. • If the rinse aid indic ator is on, fill the rinse aid dispenser. 3. Load the basket s. 4. Add [...]

SETTING AND STARTING A PROGRAMME Setting mode The appliance must be in setting mode to accept some operations. The appliance is in setting mode when, after the activation: • All the programme indicators come on. • The display shows two horizontal status bars. If the control pane l shows other condi- tions, press and hold Delay and Start at the [...]

• Let the dishes become cold before you remove them from the appliance. Hot dishes can be easily damaged. • First remove the items from the lower basket, then from the upper basket. There can be water on the sides and on the door of the appliance. Stainless steel becomes cool more quickly th an the dishes. 16 www.ae g.com[...]

CARE AND CLEANING WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. Dirty filters and clogged spray arms decrease the washing re- sults. Make a check regularly and, if necessary, clean th em. CLEANING THE FILTERS C B A 1. Turn the filter ( A ) counterclockwise and remove it. A1 A2 2. To disas[...]

TROUBLESHOOTING The appliance does not start or it stops during operation. Before you contact the Service, refer to the information that follows for a solution to the problem. With some problems, the display shows an alarm code: • - The appliance does not fill with water. • - The a ppliance does no t drain the water. • - The anti-flood device[...]

THE WASHING RESULTS AND DRYING RESULTS ARE NOT SATISFACTORY Problem Possible cause Possible solution The dishes are not clean . The filters are clogged. Clean the filters. The filters are not correctly assembled and installed. Make sure that the filters are correctly assembled and in- stalled. The spray ar ms are clog- ged. Remove remaining soil wi[...]

Problem Possible cause Possible solution The quantity of detergent was too much. Make sure that you add the correct quantity of detergent in the dispenser before you start a programme. Dry water drop stains on glasses and dishes. The released quantity o f rinse aid was not sufficient . Increase the released quanti- ty of rinse ai d. The quality of [...]

2) If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian energy), use the hot water supply to decrease energy consumption. ENGLISH 21[...]

22 www.ae g.com[...]

ENGLISH 23[...]

www.aeg.com/shop 117911670 -A-412012[...]