AEG F78400VI0P инструкция обслуживания

FAVORIT 78400 VI DISHWASHER USER MANUAL[...]

CONTENTS 4 SAFETY INFORMATION 6 PRODUCT DE SCRIPTIO N 7 CONTR OL PANEL 8P R O G R A M M E S 10 OPTIONS 11 BEFORE FIRST USE 14 DAILY USE 17 CARE AND CLEANING 18 TROUBLE SHOOTING 20 TE CHNICAL INFOR MATION ENVIRONMENT CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environmen[...]

FOR PERFECT RESULTS Thank you for choosing this AEG product. We hav e created it to give you impeccable performance for many years , wi th innovative technologies tha t help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading t o get the very best from it. ACCESSORIES AND CONSUMABLES In the A[...]

SAFETY INFORMATION Before the installatio n and use of th e appliance, carefully read the supplied instructions. The manufacturer is not re- sponsible if an incorrect installation and use causes injuries and damages. Al- ways keep the instructions with the ap- pliance for future ref erence. CHILDREN AND VULNERABLE PEOPLE SAFETY WARNING! Risk of suf[...]

ble. Contact Service or an electrician to change a damaged mains cable. • Connect the mains plug to the mains socket only at the end of the in stalla- tion. Make sure that there is access to the mains plug after the installa- tion. • Do not pull the mains cable to dis- connect the appliance. A lways pull the mains plug. • Only for UK and Irel[...]

PRODUCT DESCRIPTION 11 1 2 3 4 7 9 5 6 8 10 1 Upper spray arm 2 Lower spray arm 3 Filters 4 Rating plate 5 Salt container 6 Water hardness dial 7 Rinse aid dispenser 8 Detergent dispenser 9 Cutlery basket 10 Lower basket 11 Upper basket LIGHT BEAM • When a program me operates, a red light beam shows on the floor below the appliance door. When the[...]

CONTROL PANEL 1 2 3 4 5 6 7 8 9 1 On/off button 2 Display 3 Delay button 4 Programme button (down) 5 Programme butto n (up) 6 ÖKO PLUS button 7 Multitab button 8 RESET button 9 Indicators Indicators Salt indicator. This indicator is off while the programme operates. Rinse aid indicator. This indicator is off while the programme op- erates. End ind[...]

PROGRAMMES Programme Type of soil Type of load Programme ph ases Options 1 1) All Crockery, cutlery, pots and pans Prewash Wash 45 °C or 70 °C Rinses Dry ÖKO PLUS 2 2) Heavy soil Crockery, cutlery, pots and pans Prewash Wash 70 °C Rinses Dry ÖKO PLUS 3 3) Normal soil Crockery and cutlery Prewash Wash 50 °C Rinses Dry 4 4) Fresh soil Crockery [...]

Consumption v alues Programme 1) Duration (min) Energy (kWh) Water (l) 1 80 - 140 0.7 - 1.3 8 - 14 2 130 - 150 1.1 - 1.2 10 - 11 3 180 - 200 0.9 - 1.0 8 - 9 4 30 0.8 7 5 170 - 190 0.7 - 0.8 8 - 9 6 40 - 50 0.8 - 0.9 8 - 9 7 70 - 80 0.6 - 0.7 9 - 10 8 10 0.01 3 1) The water pressure and temperature, the variations of the mains supply, the options an[...]

OPTIONS MULTITAB FUNCTION Activate this function only when you use the combi detergent tablets. This function deactivates the flow of rinse a id and salt. The related indicators are off. The programme duration can increase. Activating the multitab function Activate or deactivate the multi- tab function before th e start of a programme. You cannot a[...]

BEFORE FIRST USE 1. Make sure that the set level of the water softener agrees w ith the water hardness in your area. If not, adjust the water softener. Contact your lo- cal water authority t o know the wa- ter hardness in your area. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open the w ater tap . 5. Processing residues can stay[...]

Manual adjustment Turn the water hardness dial to t he po- sition 1 or 2. Electronic adjustment 1. Press the on/off button to activate the appliance. 2. Make sure that the appliance is in setting mode. Refer to ‘SETTING AND STARTING A PROGRAMME’. 3. Press and hold buttons ( 4 ) and ( 5 ) at the same time until the indicators of buttons ( 3 ), ([...]

FILLING THE RINSE AID DISPENSER M A X 1 2 3 4 + - A B D C CAUTION! Only use rinse aid for dishwas h- ers. Other products can cause damage to the appliance. The rinse aid, during the last rinsing phase, helps to dry the dishes without streaks and stains. 1. Press the release button ( D ) to open the lid ( C ). 2. Fill the rinse aid dispenser ( A ), [...]

DAILY USE 1. Open the w ater tap . 2. Press the on/off button to activate the appliance. Make sure that the appliance is in setting mode. Refer to ’SETTING AND STARTING A PROGRAMME’. • If the salt indicator is on, fill the salt container. • If the rinse aid indicator is on, fill the rinse aid dispenser. 3. Load the baskets. 4. Add the deter[...]

USING THE DETERGENT 20 30 M A X 1 2 3 4 + - A B C CAUTION! Use only deterge nts for dish- washers. 1. Press the release button ( B ) to open the lid ( C ). 2. Put the detergent in the compart- ment ( A ) . 3. If the programme has a prewash phase, put a small quantity of de- tergent on the inner pa rt of the ap- pliance door. 4. If you use detergent[...]

lay time you want to set (from 1 to 24 hours). • The delay time flashes in the dis- play. • The delay indicator is on. 3. Close the appliance door. The countdown starts. • If you open the door, the display shows the countdown of the de- lay start that decreases with steps of 1 hour. • When the countdown is completed, the programme starts . [...]

CARE AND CLEANING WARNING! Before maintenance, deactivate the ap- pliance and disconnect th e mains plug from the mains socket. Dirty filters and clogged spray arms decrease the washing re- sults . Make a check regularly and, if necessary, clean them. CLEANING THE FILTERS C B A A1 A2 1. Turn the filter ( A ) counter- clockwise and remove it. 2. To [...]

TROUBLESHOOTING The appliance does not start or it stops during operation. First try to find a solution to the prob- lem (refer to the table). If not, contact Service. With some prob lems, the dis play shows an alarm code: • - The appliance does not fill with water. • - The appliance does not drain the water. • - The anti-flood device is on. [...]

THE WASHING RESULTS AND DRYING RESULTS ARE NOT SATISFACTORY Problem Possible cause Possible solution The dishes are not clean . The filters are clogged. Clean the filters. The filters are not correctly assembled and installed. Make sure that the filters are correctly assembled and in- stalled. The spray ar ms are clog- ged. Remove remaining soil wi[...]

Problem Possible cause Possible solution The quantity of detergent was too much. Make sure that you add the correct quantity of detergent in the dispenser before you start a programme. Dry water drop stains on glasses and dishes. The released quantity o f rinse aid was not sufficient . Increase the released quanti- ty of rinse ai d. The quality of [...]

Water supply 1) Cold water or hot water 2) max. 60 °C Capacity Place settings 9 1) Connect the water inlet hose to a water tap with a 3/4'' thread. 2) If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian energy), use the hot water supply to decrease energy consumption. ENGLISH 21[...]

22[...]

ENGLISH 23[...]

www.aeg.com/shop 117929050-A- 192011[...]