Airlink101 AR660W3G инструкция обслуживания

``` Quick Installation Guide Wireless N 3G / 3.5G Mobile Router Model # AR660W3G Ver. 1A[...]

Congra tulations o n your purc hase of AR660W3G Wireless N 3G/3.5G Mobile Router. This product is specifically design ed for business trav elers o r SOHO needs. It provides an extended WAN solution , 3G Mobile USB modem card for Internet surfing beside s regular Cable or DSL mod em and is easy to share the Internet conne ct ivity wherever 3G mobile[...]

Step 1 Option 1 Plug the 3G/3.5G USB modem card into the USB slot on the front panel of the router. Option 2 Connect one end of a network ca ble to the WAN port of the router and connect the other end of the cabl e to the DSL/Ca ble mode m. Power on the modem. Step 2 With another network cable, co nnect one end of the cable to your computer’s Eth[...]

Step 3 Plug the power adapter to the router and con nect it to an outlet or power strip. Step 4 Power on your computer. Step 5 Make sure either WAN or USB , WLAN , an d the LAN port that the computer is connected to are lit. If not, try the above steps again. LED Indicators: LED Light Status Description POWER On Router is powered on. On WPS setup i[...]

Configuring the Router Step 1 Open the web browser (Int ernet Explorer or Mozilla Firefox) from the computer that is wired to the Router, type 192.168.2.1 in the Addre ss bar and press Enter . Step 2 Enter admin for both the username and pa ssword fields a nd click OK . Flashing WAN port is transferring or receivin g dat a. On USB modem is connecte[...]

Step 3 Click Setup Wi zard on the left menu.[...]

Step 4 Configure the Time Zone Settings of the Router. Click Nex t . Step 5 Select WAN type by which Internet service you are using. This guide will provide instructions on these WA N types: 3G/3.5G, Cable, and DSL.[...]

3G/3.5G Click on 3G/3.5G if you are connecting to Internet through a 3G USB modem. When the 3G/3.5G detailed settings co me up, enter the Internet connection parameters if it is required by your wi reless 3G Internet Service Provider. There are 2 types of Services: CDMA2000 or 3G/3.5G Only (UMTS/HSPA/HSDPA) . You may try both service types if you a[...]

DSL For DSL users, your Internet type is either Dy na m ic IP or PPPoE . If you are not sure which one you have, it is suggested to sel ect PPPoE xDSL for your WAN type, and if you cannot connect to the Internet after the Setup Wizard finished, go through the Setup Wi zard again a nd select Cable Modem . Otherwise, you can call your ISP to confirm [...]

Note: Depending on the ISP, you may need to inclu de the domai n name with your username. Example: username@sbcglobal.net Option 2: Dynamic IP Settings Click on Cable Modem for your WA N type. When the Dynamic IP settings come u p, leave click Clone MAC and click Next . Step 6 Keep the default SSID (wireless network name) or cha nge it to a desired[...]

Step 7 Set up Wireless Security for your router. WPA2(AES) is the most secured encr yption mode for general users. WEP is the most common encryption but the lea st se cu red. It is recommended to use WPA2 (AES) for your wirel ess securi ty if all wireless devices on your network can support this mode. WPA2(AES) Select WPA pre -shared key for Encryp[...]

WPA Unicast Cipher Suite: Select WPA2(AES) Pre-Shared Key Forma t: Select Passphrase Pre-shared Key: Enter a key between 8 to 63 charact ers (alphanumeri c, case sensitive). This is the secu rity ke y for your wireless network Click OK to save the settings. WEP Select WEP for Security Mode.[...]

• Key Length: Select 64-bit or 128-bit • Key Format: Select Hex or ASCII • Default Tx Key: Select Key 1 • Encryption Key 1: If you selected 64-bit key length and ASCII key format, enter 5 alphanumeric char acters. If you sele cted 128-bit key length and ASCII key format, enter 13 alphanumeric characters. If you selecte d 64- bit key length [...]

If either section has valid IP addresse s being a ssigned, the router is connected to the Internet. Connecting to the Router Wirelessly You must configure your wirele ss computer in order to establi sh a wireless connection to the router. In this section, you can find t he instructions of how to connect to the router wirelessly with your Vista comp[...]

Step 1 Click on this icon on the task bar of your desktop, then clic k on Wireless networks are available. Step 2 Click on the wireless netwo rk you want to connect to and cl ick Connect .[...]

Step 3 Enter the Security key you configur ed for the Router (se e Step 8 in Section 2). Cl ick Connect . Step 4 Click on Close . Now the wireless conne ction has been established successfully with the Router.[...]

Connecting to the Router with Easy Setup Button The AR660W3G Airlink10 1 Wireless N 3G/3.5G Mobile Router has a Easy Setup Button built-in which allows you to connect your wireless computer with the router easily and safely. Your wireless adapter must supp ort this feature (WiFi Protected Setup™) as well. If not, you will need to set up the wirel[...]

You will see this window pops up on the monitor: Step 3 Within the following 2 minutes, push the Ea sy Setup Button on the Router. The WLAN LED on the Router will stay solid green instead of blinking. Step 4 The Router will now start to synchr onize the security settings with the wire less a dapte r . When you see a similar window as below, the con[...]

Troubleshooting If you have trouble connecting to the Internet with the Cable/DSL modem , try the following steps: Step 1 Power off the Cable/DSL modem, router, and computer and wait for 5 minutes . Step 2 Turn on the Cable/DSL mod em and wait for the lights on the modem to settle down. Step 3 Turn on the router and wait for the lights on the route[...]

Step 6 Verify that the Internet IP Address , Subnet Mask , and Default Gateway have valid numb ers a ssigned to them (instead of all 0’s). If you have trouble connecting to the Internet with the 3G/3.5G USB modem , there are few things your can try: 1. Make sure your 3G/3.5G modem is co mpatible with AR660W3G Wireless N 3G/3.5G Router. Pl ease ch[...]