Airlink101 AWLC6070 инструкция обслуживания

150N Draft 802.11n Wireless Cardbus Adapter Model # AWLC6070 User’s Manual Rev. 1.0[...]

2 Table of Contents 1. Intr oducti on ................................................................................................................ .3 1.1 Package Contents ................................................................................................. 3 1.2 Feat ures .............................................................[...]

3 1. Introduction Congratulations on your purchase of the 150N Draft 802.11n Wireless Cardbus Adapter. The 150N Cardbus Adapter provides wirele ss data rate of up to 300 Mbps* downlink and 150Mbps* uplink when used with other AirLink101® 150N or 300N wireless products. The high bandwidth combined with ex tended wireless coverage delivers fast and [...]

4 2. Inst allation This section provides instructions on how to install the 150N Draft 802.11n Wireless Cardbus Adapter . The driver is install ed along with the utility. Step 1 Insert the Cardbus adapter into an ava ilable Cardbus slot and turn on your computer. Step 2 After turning on the comput er, Windows will launch the Found New Hardware Wiza[...]

5 Note: If the Autorun screen doesn’t appear automat ically, or if you get a blank white screen, go to Start , Run , and type D:UtilitySetup.exe (where D is the letter of your CD drive) and click OK . Windows Vista users : At this point, you may get a warning message like the one below. Make sure that you click Allo w to continue with the insta[...]

6 Step 4 Click Next at the welcome screen.[...]

7 Step 5 Click Next to accept the default destination folder.[...]

8 Step 6 Click Continue Anyway at the Windows Logo Screen. (For Windows 2000, click Yes at the Digital Signatu re Not Found prompt). For Windows Vista, click the Install this driver software anyway button when the security warning appears.[...]

9 Step 7 Click Yes, I want to restart my computer now and then Finish to restart your computer. Step 8 After the computer is re started, Windows will ask to connect to Windows Update, select No, not this time and click Next . If this screen does not appear, you can skip to section 2.2.[...]

10 Step 9 Select Install the software automatically and click Next .[...]

11 Step 10 Click Continue Anyway at the Windows Logo Screen. (For Windows 2000, click Yes at the Digital Signatur e Not Found prompt). For Windows Vista, click the Install this driver software anyway button when the security warning appears.[...]

12 Step 11 Click Finish .[...]

13 3. Configuring the Adapter This section describes how to connect your wireless adapter to a wireless network. Note to Windows XP Users: You must disable the Wireless Zero Configur ation Utility in order to use the bundled Wireless Utility. Please follow the steps below to disable XP’s wireless utility. Windows Vista users can skip the followin[...]

14 Step 1 To open the utility, double click on the Wireless Monitor icon in the system tray at the bottom right-hand corner of your screen. Step 2 Go to the AP List tab, select the SSID (Network Name) of the wireless network you wish to connect to, and click Connect .[...]

15 If the network you are attempting to connect to is configured for encryption, you will see an orange lock icon next to the network.[...]

16 When you click on it and click connect, a box will pop up requesting the wireless encryption key for the router. Enter t he encryption key into the box and click OK .[...]

17 Step 3 You should now be connected. You shoul d see “Connected” in the top, right hand corner, and there will be a blue circle ar ound the antenna icon next to the network name. Troubleshooting : If you are experi encing problems with the connection (unable to connect, low signal strength, slow connection speed, not working, unstable wireles[...]

18 4. Wireless Monitor This section describes the various functi ons of the Wireless Monitor that you can configure, including the setti ngs of wireless encryption. 4.1 Wireless Information The Wireless Information box at the top of t he window provides you with the status of the current connection, includ ing signal, network name (SSI D), IP Addre[...]

19 4.2 AP List The AP List tab displays all the available wire less networks detected by the Wireless Adapter. Simply select the wireless network you wish to connect to and click Connect . If you have created multiple profiles, you can use the profile chooser at the bottom to select the specific profile you want to use. Then click Activate to enabl[...]

20 4.3 Profile Settings This section provides instructions on using the Profile Settings section of the wireless monitor. The My Wireless Networks box lists the different pr ofiles you’ve created for the different networks that you us e. Profiles are automatical ly created and added to this list when you connect to new networks. You can also manu[...]

21 The Profile Settings box will appear allowing you to specify the settings for your new profile or change settings for your existing profile. Once you are finished entering the settings, click OK to save the changes.[...]

22 4.4 Configuring Encryption This section describes the different types of encryption available and how to configure them. In most cases, encry ption will be automatically configured and all that will need to be entered is the key, as described in Section 3 Step 2 . The only time you will need to manually configure the encryption settings is if yo[...]

23 These three are meant for the home user: None: No encryption in use WEP: The most popular but least se cure form of encryption WPA/WPA2-PSK: The most secure and recommended level of encryption The remaining two are for use in a corporat e environment that utilizes authentication servers. If you do not know if you have an authentication server, y[...]

24 Configuring WEP encryption Select WEP from the Set Security Option box. Under Wired Equivalent Privacy (WEP) , you will want to select Shared or Open , depending on the router settings. In the Key box, you will want to type in the encrypt ion key for the rout er. If you check the Show text in the passw ord field box, your key will appear in the [...]

25 Configuring WPA/WPA2-PSK Encryption (for home users) Select WPA/WPA2-PSK from the Set Security Option box. Under Passphrase Settings select either TKIP or AES depending on the settings for your router. Enter the encryption key into the KEY box.[...]

26 Configuring WPA/WPA2 Encryption (for corporate networks) Select WPA/WPA2 from the Set Security Option box. Under Advanced Security Settings select either TKIP or AES depending on the settings for your router. Click on Advanced Config to enter your aut hentication settings. The adapter supports EAP-TLS, LEAP, EAP- TTLS, and PEAP authentication me[...]

27 Configuring 802.1x authentication (for corporate networks) Select 802.1x from the Set Security Option box. Click on Advanced Config to enter your aut hentication settings.[...]

28 The adapter supports EAP-TLS, LEAP, EAP- TTLS, and PEAP authentication methods. Refer to your system administrator for inform ation about what sett ings you should enter here. 4.5 Ad-hoc and Peer-to-Peer Wireless Networks Ad-hoc networking is used when you want to connect two or more computers together but you don’t have a router. In ad-hoc mo[...]

29 Open the Wireless Monitor. Click on Profile Setting , then click on New . The profile settings box will appear. First change the network type to Adhoc . (Infrastructure is for when you are using a router). Enter a profile name into the Profile Name box so that you can identify the profile. Type in a network nam e (SSID) into the SSID box Select [...]

30 Once that is done, click on the AP List . Select your new profile from the profile chooser and click Activate to enable the profile. You will need to configure all other comput ers that you are planni ng on connecting to your ad-hoc network with the same settings that you input on this screen. Every computer has to be set up exactly the same. If[...]

31 4.6 About The About tab shows the Utility, Driver, and Firmware version as well as the MAC address of the adapter.[...]

32 Appendix A – Features Frequency Band • 2.4~2.5 GHz Standards • IEEE 802.11b / 802.11g • 802.11n draft 2.0 Interface • Cardbus Security • WPA-PSK (TKIP) • WPA2-PSK (AES) Transmitted Power • 802.11b: 17 dBm@1TX; 20 dBm@2TX • 802.11g: 13 dBm@1TX; 16 dBm@2TX • Draft 11n: 13 dBm@1TX; 16 dBm@2TX Data Rate • Receiving: Up to 3000*[...]

33 Appendix B – Information Federal Communication Commission Interference S t atement This equipment has been tested and found to co mply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rule s. These limits are designed to provide reasonable protection against harmful interferenc e in a residential installation. This [...]

34 European Union Notice: Radio products with the CE marking comply with the R&TTE Direct ive (1999/5/EC), the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. Compliance with these directives implies co nformity to the following European Norms: z EN 60950 Product Safety z [...]

35 T echnical Support E-mail: support@airlink101.com Toll Free: 1-888-746-3238 Web Site: www.airlink101.com *Theoretical maximum wireless signal rate derived from IEEE 802.11g standard and IEEE 802.11n draft specification version 2.0. Actual data throughput will vary. Network conditions and environmenta l factors, including volume of network traffi[...]