AMX 68 инструкция обслуживания

AMX 68 Owner's Manual 12/29/9 7[...]

Standard Feature s þ Life time War ranty — We guarantee the operation of the control uni t and remote controls for as long as you own your car (see the enclose d warranty card for details). þ A Pair of Avi Gl o  3-Button/6-Channel Remote Con trols — Thes e remotes allow you to command your system from up to 100 feet away . Once exposed to [...]

þ In te rior Light Il lu mi na tion Ca pa bil ity — When remotely disarmed , the alarm system turns on the interior lights for 30 seconds or until th e ignition key is turned on (requires an optional relay) . þ Multi- Zone Pro tec tion — Offers full perimeter security with separate trigger connections for the doors, hood and trunk (may requir[...]

þ Re mote Con trol Door Lock Ca pa bil ity — Allows you to lock an d unlock your doors without using your key (may require optional relays). þ User Pro gram ma ble Pas sive Door Lock ing — Allows you t o program the system to automatically lock the doors every time the alar m passively arms . þ Key less En try in Valet Mode — Allows you to[...]

Operating Instruction s n Remote Control — Each of the pair of remote controls is a miniatur e radio transmitter with a typical range of up to 100 feet. Obstructions, radio interference, cellular transmissions or a weak remote control battery may reduce the range or interrupt transmission. (If the syste m does not immediately respond, release and[...]

n To Silently Arm or Disarm the System — Press remote button #3 for 1-2 seconds. n Si lent Arm In di ca tions. The parking lights will flash twice, th e doors will lock, the starter will be disabled and the LED will flash slowly . n Si lent Dis arm In di ca tions. The parking lights will flash once, the doors will unlock, the starter will be enab[...]

n Turn off Valet Mode 1 . Turn your ignition key to the "ON" position or start the vehicle. 2 . Flick the valet switch to the "OFF" position . 3. The LED will turn off to indicate the alarm is no longer in V alet Mode . n User Programmable Passive Door Locking — The system wil l not automatically lock the doors when the alarm [...]

n Previous Intrusion Alert — If the vehicle had been tampered wit h and the alarm has been triggered, the siren will chirp 3 times upo n remote disarm instead of the usual 1 chirp . n Specific Intrusion Identification — If the alarm had been triggered in your absence, the siren will chirp 3 times upon remote disar m ( Previous Intrusion Alert )[...]

n How to Interpret the Chirps and Parking Light Flashes  When you press the remote control buttons, the system will respond wit h chirps (unless you have the chirp muting feature turned on or the syste m is in V alet Mode) and flashes of the parking lights to indicate the syste m status. An explanation of these chirp/flash acknowledgments is a s[...]

Programming Alarm System Features All programmable alarm features are accomplished by turning the ignitio n key on (or starting the vehicle) and flicking the valet switch on and off a preset number of times . 1. Remove the alarm from V alet Mode. Programming cannot be accessed while the alarm is in V alet Mode, indicated by the LED on solid red . 2[...]

Programming Your Remote Control s The alarm allows the user to add new remote controls in one step, delete lost or stolen remote controls or rearrange the factory preset remote contro l configuration . All remote control programming features are accomplished by turning the ignition key on (or starting the vehicle) and flicking the valet switch on a[...]

Fea tur e Fac tor y Set ting # o f Chirp s Re mote Con trol Sec on dary Ac tio n Instant Cod e Deletio n — 13 Wait 3 seconds. The siren will chirp twice. All remote controls are erased from memory . 12 AMX 68 Owner's Manual 12/29/9 7[...]