AMX MXD-2000XL-PAN инструкция обслуживания

Operation/Reference Guide Touch Panels MXT/D-2000XL-PAN 20.3" Modero X Series® Pano ramic Tabletop Touch Panel 20.3" Modero X Series® Pa noramic Wall Touch Panel Last Updated: 10/24/201 2[...]

AMX Limited Warranty and Disclaimer This Limited W arranty and Disclaimer extends only to products purchased directly from AMX or an AMX Authorized Partn er which include AMX Dealers, Distributors, VIP’s or other AMX authorized entity . AMX warrants its products to be free of defects in material and workmanship under normal use for three (3) ye a[...]

AMX Software License and Warranty Agreement • LICENSE GRANT . AMX grants to Licensee the non-exclusive right to use the AMX Software in the manner described in this License. The AMX Software is licensed, no t sold. This license does not grant Licensee the right to create derivative wor ks of t he AMX Software. The AMX Software consists of general[...]

[...]

Table of Contents i MXD/T-2000XL-PAN 20.3" Modero X Series® Panora mic Touch Panels Table of Contents Modero X Series® Touch Panels ........................................................................ 1 Overview .............................. ......................... ................... .................... .................... 1 Featur[...]

ii MXD/T-2000XL-PAN 20.3" Modero X Series ® Panoramic Touch Panels Table of Contents Configuration and Programming ......................... .............................. ............... 25 Modero X Series Programming Guide ............ ................... .................... ................. 25 Upgrading Firmware .........................[...]

Modero X Series® Touch Panels 1 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touc h Panels Modero X Series ® Touch Panels Overview See more and do more with the most ele gant interf ace designed sp ecific ally for dedicated room control. The Modero X Series ® T ouch Panels provide se veral industry f irsts, including a beautiful, pano[...]

Modero X Series® Touch Panels 2 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touch Panels MXT-2000XL-PAN The MXT -2000XL-P AN ( FG5968-01 ) (FIG. 1) is ideal for boardrooms, conference rooms, or aud itoriums where a panoramic control surf ace is needed to pro v ide access to mu ltiple func tions simultaneously while remaining elegantly [...]

Modero X Series® Touch Panels 3 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touc h Panels MXT-2000XL-PAN Specifications Power Requirements: 12VDC, 4.4A: 2-pin, locking 3.5mm captive wire connecto r Power Consumption: • Constant current: 2.7A (32W) @ 12VDC • S tart up current: 4.05A (48W) @ 12VDC • S tandby current: 0.3A (3.1W) @ [...]

Modero X Series® Touch Panels 4 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touch Panels MXT-2000XL-PAN Specif ications (Cont.) Communications: Ethernet: 10/100 port, RJ-45 connector USB: 3 - USB host 2.0, T ype A ports Near Field Communications (NFC): Supports standards ISO/IEC 15693, ISO/IEC 14443A, ISO/IEC 14443B; Unique Identifier [...]

Modero X Series® Touch Panels 5 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touc h Panels Connector Locations W ith the unit facing you, the tw o T ype A USB ports for pe ripherals are located on the rear right corner of the dev ice (FIG. 3). The po wer and Ethern et connectors, as well as an additional USB port and a 5-pin Micro-USB p[...]

Modero X Series® Touch Panels 6 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touch Panels MXD-2000XL-PAN The MXD-2000XL-P AN 19.4” Modero X Seri es Panoramic W all T ouch Panels ( P ortrait W all Mount: FG5968-05 ; Landscape W all Mount: FG5968-11 ) are ideal for boardrooms, conf erence rooms, or auditoriums where a panoramic control [...]

Modero X Series® Touch Panels 7 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touc h Panels MXD-2000XL-PAN Sp ecifications Power Requirements: 12VDC, 4.4A: 2-pin, locking 3.5mm captive wire connecto r Power Consumption: • Constant current: 2.7A (32W) @ 12VDC • S tart up current: 4.05A (48W) @ 12VDC • S tandby current: 0.3A (3.1W) @[...]

Modero X Series® Touch Panels 8 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touch Panels Memory The MXD-2000XL-P AN comes with 512 MB of SDRAM and 4 GB of Flash memory , neither of which can be upgraded. A maximum of 2.4 GB is a vailable to the u ser for projects. Basic Operation The MXD-2000XL-P AN is operated using its in tegral touc[...]

Modero X Series® Touch Panels 9 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touc h Panels MXD-2000XL-PAN-NC The MXD-2000XL-P AN-P-NC ( FG5968-33 ) and MXD-2000XL-P AN-L-NC ( FG5968-34 ) No Comm touch panels do not ha ve camera, microphone, or NFC capability . These otherwise hav e all of the functionality of the MXD-2000XL-P AN panels.[...]

Modero X Series® Touch Panels 10 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touch Panels MXD/T-2000XL-PAN Features Picture View By connecting a USB dri ve via one of the de vice’ s USB ports (FIG. 3), Pictur e V iew allo ws the MXT - 2000XL-P AN to access JPEG images on that card and display them on the touchscreen (FIG. 6). Individ[...]

Modero X Series® Touch Panels 11 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touc h Panels 3. On the leftmost amber button, select between Rand (images display at random) and A-Z (images display in alphabetical order based on the name of the file ). 4. The four gray buttons allo w scrolling thr ough save d images and the rate of displa[...]

Modero X Series® Touch Panels 12 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touch Panels Picture View Send Co mmand The ^PIC Send Command stops either mode of Picture V iew , or starts Pre vie w Mode. For more information, please refer to the Moder o X Series Pro gramming Guide , available at www .amx.com . Configuration The MXT -2000[...]

Modero X Series® Touch Panels 13 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touc h Panels Cleaning the To uch Overlay and Case Both the MXT -2000XL-P AN and the MXD-2000XL-P AN come with the MXA-CLK Modero X Series Cleaning Kit ( FG5968-16 ), which may be used to clean fingerprint s and dirt from the device. This kit comes with cleani[...]

Modero X Series® Touch Panels 14 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touch Panels[...]

Installation 15 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touc h Panels Installation MXT-2000XL-PAN Installation Other than the two USB ports on the back of the de vice (FIG. 3), the power and da ta connectors for the MXT - 1900-P AN are located on the underside of the de vice (FIG . 9). The Micro-USB port is used for camera video out[...]

Installation 16 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touch Panels Wiring a Power Connection T o use the 2-pin 3.5 mm captiv e wire connector wi th a 12 VDC-compliant po we r supply , the incoming PWR and GND wires from the external source must be connected to their co rresponding locations on the connector (FIG. 11). The connecto[...]

Installation 17 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touc h Panels A Note About Wall and Rack Installation Some products are installed in areas of differing temperature and coo ling methodologies. These include products installed in walls, racks, ca binets, etc. Those areas may hav e di fferent temperatures and/or coo ling approa[...]

Installation 18 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touch Panels Installation Recommendations During any installation, a lack of ve ntilation may produce conditions that may adversely affect the device’ s operation. In t hese circumsta nces, special c are must be made to make sure that temperatures within enc losed areas do no[...]

Installation 19 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touc h Panels FIG . 15 Side view of installed MXD-2000XL-PAN (Landscape) FIG . 16 Side view of installe d MXD-2000XL-PAN (Portrait) Wa l l T emporary Mounting Posts MXD-2000XL-P AN (front) Back Box Back box knockou ts Wa l l Back box knockouts Locking tabs MXD-2000XL-P AN (fron[...]

Installation 20 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touch Panels T o install the back box: 1. Prepare the area by removing any scre ws or nails fro m the drywall before begi nning the cutout process. 2. Since the cutout for the back box is off-center fro m the edges of the touch panel, use the MXD-2000XL- P AN Installation T emp[...]

Installation 21 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touc h Panels 5. Remov e any knock outs as needed on either long dimension of the back box (FIG. 18 and FIG. 19) to facilitate inc oming wiring and pull the wiring through the resul tant holes. 6. Push the back box into the w all opening. Insure th at the locking tabs lie flush[...]

Installation 22 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touch Panels 7. Extend the locking tabs on the sides of the back box by tightening the scre ws in side the box until snug. Not all of the tabs must be ext ended to lock the ba ck box in place, b ut exte nding a minimum of the top and bottom tabs is highly recommende d. Apply en[...]

Installation 23 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touc h Panels FIG . 21 MXD-2000XL-PAN in stallation (Landscape) FIG . 22 MXD-2000XL-PAN insta llation (Portrait) Mounting posts Side cover Mounting post openings Wa l l Mounting post openings Wa l l Side cover Side cover Screws Screws[...]

Installation 24 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touch Panels 12. Use the six provided screws, three a t each end, to secure the touch panel to the back box (FIG. 22 and FIG. 23). Use only the provided screws, as ot her scre ws may damage the touch panel. 13. Snap the decorati ve side cov ers (FIG. 2 3) onto each end of the t[...]

Configuration and Programming 25 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touc h Panels Configuration and Programming Modero X Series Programming Guide Information on Settings pages, panel configur ation, a nd programming is included in the Moder o X Series Pr ogramming Guide , av ailable at www .amx.com . Programming the MXT -2000XL[...]

Configuration and Programming 26 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touch Panels[...]

Upgrading Firmware 27 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touc h Panels Upgrading Firmware Overview The latest f irmware (*.kit) f ile for eac h panel is a v ailable to do wnload from www .amx.com. T o download firmw are files, go to the catalog page for your panel t ype, and click the link under " Fi rmware Files " on[...]

Upgrading Firmware 28 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touch Panels 4. Eject or unmount the flash dri ve from the PC. Transfer the Fi rmware File From th e Flash Drive to the Tou ch Panel 1. Connect the USB Flash Driv e to one of the USB T ype A ports on th e panel. 2. Go to the Install Firmwar e setup page ( Configur ation-&[...]

Upgrading Firmware 29 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touc h Panels Upgrading from Previous Firmware The MXT -2000XL-P AN and MXD-2000XL-P AN allow the opt ion to rev ert the de vice to the prev ious firmw a re run before an upgrade. T o upgrade th e de vice from pre v iously loaded fi rmware: 1. From the Settings page, sele[...]

Upgrading Firmware 30 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touch Panels Upgrading Firmware Via NetLinx Studio The MXT -2000XL-P AN and MXD-2000XL-P AN use an Et hernet connection for progr amming, f irmware updates, and touch panel file transfer via NetLinx Studio. If you hav e access to the panel’ s network, you may transfer f[...]

Upgrading Firmware 31 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touc h Panels 6. W ithin this dialog, enter the Master System number . The default is 1 . 7. In the A vailable Connections section, click on the IP address for the touch panel to select it. 8. In the V irtual NetLinx Master Settin gs dialog box, click OK to close the box.[...]

Upgrading Firmware 32 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touch Panels Viewing devices on the Virtual System 1. After the Communication V erification dialog windo w ve rifies acti ve communication between the V irtual Master and the p anel, click the Online T ree tab in the W orkspace window (FIG. 32) to view the de vices on the[...]

Upgrading Firmware 33 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touc h Panels 5. Select the panel ’ s Kit file from the Files sectio n. 6. Enter the Device v al ue associated with the panel and the System number associat ed with the Master ( listed in the OnLine T r ee tab of the W orkspace window ). The P ort field is gr eyed-out. [...]

Upgrading Firmware 34 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touch Panels[...]

Appendix: Troubleshooting 35 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touc h Panels Appendix: Troubleshooting Overview This section describes the solutions to possible hardware/firmware issues that could arise during the common operation of a Modero X touch panel. Panel Doesn’t Respond To Touche s Symptom: The de vice either does n[...]

Appendix: Troubleshooting 36 MXD/T-2000XL-PAN 20.3" Modero X Series® Panoramic Touch Panels[...]

Appendix B - Troubleshooting 37 MXD/T-2000XL-PAN 20.3" Modero X Series® Panora mic Touch Panels[...]

10/12 © 2012 AMX. All rights reserved. AMX an d the AMX logo are register ed trademarks of AMX. AMX reserv es the right to alter specifica tions without notic e at any time. It’s Your World - Take Con trol™ 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 USA • 800.222.0193 • 469.624.8000 • 469-624-7153 fax • 800.932.6993 technical support ?[...]