AMX R-2 инструкция обслуживания

Operation/Reference Guide Mio Remote Controls Mio Modero ® R-2 Remote Control Device Last Revised: 8/2/2007[...]

AMX Limited Warranty and Disclaimer AMX warrants its products to be free of defects in material and workmanship under n ormal use for three (3) years from the date of purchase fr om AMX, with the following exceptions: • Electroluminescent and LCD Control P ane ls are warranted for three (3) years, except for the display and touch overlay componen[...]

Software License and Warranty Agreement LICENSE GR ANT . AMX grants to Licens ee the non-exc lusive right to use the AMX Software in the manner de scribed in th is License. The AMX Softwar e is licensed, not sold. This lic ense does no t grant Licensee th e right to create derivative works of t he AMX Software . The AMX So ft ware consists of gener[...]

[...]

Table of Contents i Mio Modero R-2 Table of Contents Overview ...................... ...................................................................... ................ 1 The Mio Modero® R-2 ......................... ........................ .................... ......................... 1 Touch And T ilt Sensor ... ............. .............[...]

ii Mio Modero R-2 Table of Contents[...]

Overview 1 Mio Modero R-2 Overview The Mio Modero ® R-2 The Mio Modero ® R-2 remote provides custom control features, contained in an elegant handheld rechargeable de vice. The Mio R-2 co ntrols 6 differ ent de vice modes, supports 3 macro functions, and is capable of ex ecuting 219 functions. The Mio R-2 can transmit in 38 KHz IR, 455 KHz IR, 41[...]

Overview 2 Mio Modero R-2 Touch And Tilt Sensor The Mio R-2 wakes up upon touching either the chrome side rails or pressing a button. When holding the remote and it times out, you can reawaken the de vice by tilting it. Errant jostling such as a bumped table will not wake the device unless you are holding it. Specific ations The Mio R-2 device spec[...]

Overview 3 Mio Modero R-2 FCC compliance This de vice complies with Part 15 of the FCC rules. Subject to the follo win g two conditions: 1. This device must not cause harmful interference and 2. This device must accept all interference, including interference that interferes with the operation of this device. Changes or modifications not expressly [...]

Overview 4 Mio Modero R-2[...]

Mio R-2 Setup 5 Mio Modero R-2 Mio R-2 Setup Installing Your Custom Buttons 3. Flip and turn the Mio R-2 de vice so that the buttons are facing away from you and t he device is upside down. 4. Holding the device in both hands, place your thumbs on the battery door and push up to slide the battery door free. 5. Unscre w the 6 screw points indicated [...]

Mio R-2 Setup 6 Mio Modero R-2[...]

Programming The Mio R-2 7 Mio Modero R-2 Programming The Mio R-2 Most functionality of the Mio R-2 is handled using the application, K e ypadBuilder . Go to www .amx.com for the Ke y padBuilder Instruction Manual . The Mio R-2 recognizes a select number o f Serial Commands. For a full list and descriptions, consult the P ersistent Serial Commands s[...]

Programming The Mio R-2 8 Mio Modero R-2 IR/RF Code Matrix The IR/RF Code emitted dep ends upon which of the 6 c onfigurable modes is selected. Below is the list of codes for each button within each mode. IR/RF Code Matrix Button Label Mode 1 Mode 2 Mode 3 Mode 4 Mode 5 Mode 6 1 Power Symbol 9 49 89 129 169 209 2 GUIDE 38 78 1 18 158 198 238 3 EXIT[...]

Programming The Mio R-2 9 Mio Modero R-2 Configuration Mode The configuration mode allo ws you to set the following de vice features:  IR T ransmit Mode (38 KHz, 455 KHz or both 38 KHz IR and RF)  T imeout Adjustment  Download Mode  Debug Mode  Battery T ype  LED A wake Brightnes s  LED Sleep Brightness T o enter configuration [...]

Programming The Mio R-2 10 Mio Modero R-2 Download Mode Pressing "3" on the remote toggles the Download mode OFF and ON. The Download mode must be ON before you can download a file to the Mio R-2 devi ce. While the Do wnload mode is ON the device will not go to sleep. A po wer cycle will return the de vice to Download OFF . Debug Mode Pre[...]

Programming The Mio R-2 11 Mio Modero R-2 Updating Mio R-2 Firmware Updating firmware in the Mio R-2 is also done through the programming jac k. T o update the main firmw are for the Mio R-2: 1. Connect the Mio R-2 to your computer via the programming jack (FIG. 3). 2. Put the device into Down load mode, as shown on page 10. 3. Open NetLinx Studio.[...]

Programming The Mio R-2 12 Mio Modero R-2 Persistent Serial Commands There are a select number of persistent commands the Mio R-2 recognizes. Establish a HyperT erminal session with your device to use the following commands: Serial Commands @BRT Set Brightness level Syntax: "'BRIT-<awake brightness level>,<sleep brightness level&[...]

Mio Remote Charging Base 13 Mio Moder o R-2 Mio Remote Charging Base The Mio remotes are complemented either with a Mio-RCC charging base ( FG147-02) or the Mio-RCC rechargeable upgrade kit ( FG147-03K) . One charging base, a new back housing and a Mio-RBP rechargeable lithium ion battery ( FG147-10 ) are included with the rechargeable upgrade kit.[...]

Mio Remote Charging Base 14 Mio Modero R-2 Specifications The specifications for the Mio remote char ging base and kit are as follo ws: FIG. 6 Mio Remote Charging Bas e (Top and Bottom view ) Mio-RCC Remote Charging Kit (FG147-03K ) with Base (FG147-02) Specificatio ns Dimensions (HWD) Charging Base - 1.61 (4.09 cm) ( height); 4.25 (10.80 cm) (diam[...]

Mio Remote Charging Base 15 Mio Moder o R-2 Installing The Rechargeable Battery 1. Flip and turn the Mio R-2 so that the buttons are f acing aw ay from you and the de vice is upside down. 2. Holding the device in both hands, place your thumbs on the battery door and push up to slide the battery door free. 3. If present, remov e AAA batteries. 4. Re[...]

Mio Remote Charging Base 16 Mio Modero R-2 9. Press the battery between the rubber pads, with sticker sho wing, in the housing area of the Mio remote. Conf irm battery is flush with bottom of battery enclosure on bottom housing. 10. Replace the battery door and slide to lock it in place. 11. Begin charging the battery . Charging The Mio Remote with[...]

Mio Remote Charging Base 17 M io Modero R-2[...]

8/07 © 2007 AMX. All rights reserved. AMX and the AM X logo are register ed trademarks of AMX. AMX reserves the ri ght to alter specifica tions without notice at any time. It’s Your World - Take Con trol™ 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 USA • 800.222.0193 • 469.624.8000 • 469-624-7153 fax • 800.932.6993 technical support • [...]