AOC l2080SW инструкция обслуживания

[...]

2 Safety ............................................................................................................................... ......................................... 4 National C onventio ns .......................................................................................................... ............................... 4 Power[...]

3 Regulati on .................................................................................................................... ........................................... 55 FCC Noti ce .................................................................................................................... .................................. 55 Energ[...]

4 Safety National Conventions The following subsections describe n otational conventions used in this document. Notes, Cautions, and W arnings Throughout this guide, blocks of text ma y be accompanied by an icon and printed in b old type or in italic type. These blocks are notes, cautions, and warn ings, and they are used as follows: NOTE: A NOTE i[...]

5 Power The monitor should be operat ed only from the type of power source indicated on the lab el. If you are not sure of the type of power supplied to your hom e, consu lt your dealer or local power company . Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect the monitor from damage du[...]

6 Inst allation Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product. Follo w the manufacturer ’s instructions when installing[...]

7 Cleaning Clean the cabinet regularly with cloth. Y ou can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the pro duct cabi net. When cleaning, make sure no detergent is leaked into the product. T he cleaning cloth should not be too roug h as it will scratch the screen surface. Please disconnect the po w[...]

8 Other If the product is emitting a strange smell, sound or smoke, disconnect the po wer plug IMMEDIA TEL Y and contact a Service Center . Make sure that the ventilating openin gs are not blocked by a table or curtain. Do not engage the LCD monitor in sever e vib r ation or high impact conditions during o per ation. Do not knock or drop the monito[...]

9 Setup Content of the Box Monitor CD Manual S tand Base Adapter Analog Cable Power C able *  * * Not all signal cables (A dapter , power ) will be prov ided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation.[...]

10 Setup S t and & Base Please setup or remove the S tand following the steps as below . Setup Remove:[...]

11 Adjusting V iewing Angle For optimal viewing it is recommended to look at the full fa ce of the monitor , then adjust the monitor's angle to your own preference. Hold the stand so you will not toppl e the mon i tor when you change the monitor's angl e. Y ou are able to adjust the monitor's angle from -5° to 23 °. NOTE: Do not to[...]

12 Connecting the Monitor Cable Connections In Back of Monitor an d Computer: E2180SWN 1. Analog (D-Sub ) 2. Power T o protect equipment, always turn off the PC and LCD monitor before connecting. 1. Connect the power cable to the AC port on the back of the monitor. 2. Connect one end of the 15-pi n D-Sub cable to the back of the monitor and connect[...]

13 W all Mounting Preparing to Install An Optional Wa ll Mounting Arm. This monitor can be attached to a wall mounting arm you p urchase separately . Disconnect po wer before this procedure. Follow these steps: 1. Remove the base 2. Follow the manufacturer's instr uctions to assemble the wall mounting arm. 3. Place the wall mounti ng arm onto [...]

14 Adjusting Setting Optimal Resolution Windows 8 For Windows 8: 1. Right click and click A ll apps at the bottom-right of the screen. 2. Set the “ View by ” to “ Category ”. 3. Click Appearance and Person alization.[...]

15 4. Click DISPLAY. 5. Set the resolution SLIDE-BAR to Optimal preset resolution[...]

16 Windows 7 For Windows 7: 1. Click ST ART . 2. Click CONTROL P ANEL. 3. Click Appearance. 4. Click DISPLAY.[...]

17 5. Set the resolution SLIDE-BAR to Optimal preset resolution[...]

18 Windows Vist a For Window s Vista: 1. Click ST ART . 2. Click CONTROL P ANEL. 3. Click Appearance and Personalization. 4. Click Personalization[...]

19 5. Click Display Settings. 6. Set the resolution SLIDE-B AR to Optimal pr eset resolution[...]

20 Windows XP For Windows XP: 1 Click ST ART . 2 Click SETTINGS. 3 Click CONTROL P ANEL. 4 Click Appearan ce and Themes. 5 Double click DISPLA Y .[...]

21 6 Click SETTINGS. 7 Set the resolution SLIDE-BAR to Optimal preset resolution Windows ME/2000 For Windows ME/2000: 1 Click ST ART . 2 Click SETTINGS. 3 Click CONTROL P ANEL. 4 Double click DISPLA Y . 5 Click SETTINGS. 6 Set the resolution SLIDE-BAR to Optimal preset resolution[...]

22 Hotkeys 1 Menu/Enter 2 4:3 or wide / ∧ 3 Clear Vision / ∨ 4 Auto/Exit 5 Power Power Press the Power button to turn on/off the monitor . Menu/Enter Press to display the OSD or confirm the sele ction 4:3 or wide image ratio/ ∧ When there is no OSD, press ∧ hotkey continuously to chan ge 4:3 or wide image ratio.(if the product screen size i[...]

23 Clear Vision When there is no OSD, Press the “ ∨ ” button to activate Clear Vision. 1. Use the “ ∧ ” or “ ∨ ” buttons to select bet ween w eak, medium, str ong, or off settings. Default setting is always “off”. 2. Press and hold “ ∨ ” button for 5 seconds to ac tivate the Cle ar V ision Demo, and a message of “Cle a[...]

24 OSD Setting Basic and simple instruction o n the control keys. 1. Press the MENU-button to activate the OSD window . 2. Press ∨ or ∧ to navigate through the functions. Once the desir ed function is highlighted, press the MENU-button to activate. Press ∨ or ∧ to navigate through the sub-menu. Once the desire d functio n is highlighted, pr[...]

25 Luminance 1. Press (Menu) to display menu. 2. Press ∨ or ∧ to select (Luminance), and press to enter. 3. Press ∨ or ∧ to select submenu, and press to enter . 4. Press ∨ or ∧ to adjust. 5. Press (Auto) to exit . Brightness 0-100 Backlight Adju stment. Contrast 0-100 Contra st from Digital-register. Eco mode Standard Standard Mode. Tex[...]

26 Image Setup 1. Press (Menu) to display menu. 2. Press ∨ or ∧ to select (Image Setup), and press to enter. 3. Press ∨ or ∧ to select submenu, and press to enter . 4. Press ∨ or ∧ to adjust. 5. Press (Auto) to exit Clock 0-100 Adjust picture Clock to reduce Vertical-Lin e nois e. Phase 0-100 Adjust Picture Phase to reduce Horiz ontal-L[...]

27 Color Setup 1. Press (Menu) to display menu. 2. Press ∨ or ∧ to select (Color Setup), and press to enter . 3. Press ∨ or ∧ to select submenu, and press to enter . 4. Press ∨ or ∧ to adjust. 5. Press (Auto) to exit Color Temp. Warm Recall Warm Color Temperature from EEPROM. Normal Recall Normal Color Temperature from EEPROM. Cool Reca[...]

28 Picture Boost 1. Press (Menu) to display menu. 2. Press ∨ or ∧ to select (Picture Boost), and press to enter . 3. Press ∨ or ∧ to select submenu, and press to enter . 4. Press ∨ or ∧ to adjust. 5. Press (Auto) to exit Frame Size 14-100 Adjust Frame Size. Brightness 0-100 Adjust Frame Brightness. Contrast 0-100 Adjust Frame Contrast. [...]

29 OSD Setup 1. Press (Menu) to display menu. 2. Press ∨ or ∧ to select (OSD Setup), and press to enter . 3. Press ∨ or ∧ to select submenu, and press to enter . 4. Press ∨ or ∧ to adjust. 5. Press (Auto) to exit H. Position 0-100 Adjust the horizontal position of OSD. V. Position 0-100 Adjust t he vertical pos ition of OSD. Timeout 5-1[...]

30 Extra 1. Press (Menu) to display menu. 2. Press ∨ or ∧ to select (Extra), and press to enter . 3. Press ∨ or ∧ to select submenu, and press to enter . 4. Press ∨ or ∧ to adjust. 5. Press (Auto) to exit Input Select Auto/Analog The item is disable to adjust. Auto Config yes or no Auto adjust the picture to default. Off timer 0-24hrs S[...]

31 Exit 1. Press (Menu) to display menu. 2. Press ∨ or ∧ to select (Exit), and press or AUTO to enter . Exit Exit the main OSD.[...]

32 LED Indicator St atus LED Colo r Full Power Mode Green Active-off Mode Orange[...]

33 Driver Monitor Driver Windows 8 1. S tart Windows® 8 2. Right click and click All app s at the bottom-right of the screen. 3. Click on the “Control panel” icon 4. Set the “Vie w by” to “Large icons” or “Small icons” .[...]

34 5. Click on the “Display” icon. 6. Click on the “Change display settings” button. 7. Click the “ Advanced Settings” button .[...]

35 8. Click the “Monitor” tab and then click the “Properties” button . 9. Click the “Driver” tab. 10. Open the “Up date Driver Software-Generic PnP Monitor” window by clicking on “Update Driver ... “ and then click the "Browse my co mputer for driver soft w are" button.[...]

36 11. Select "Let me pick from a list of device driv ers on my computer" . 12. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory: X:Drivermodule name ( where X is the driv e letter designator for the CD-RO M drive). 13. Select the "xxx.inf" file and click the “Open”[...]

37 Windows 7 1.S tart Windo ws® 7 2.Click on the 'St art' button and then click on 'Control Panel'. 3. Click on the 'Display' icon.[...]

38 4.Ckick on the “Change display se ttings” button. 5. Click the “ Advanced Settings” button. 6. Click the “Monitor” tab and then click the “Properties” button.[...]

39 7.Click the “Driver” tab. 8. Open the "Update Driver Soft ware-Generi c PnP Monitor" window by clicking on “Update Driver... “ and then click the "Browse my computer for driver software" button. 9. Select "Let me pick from a list of device driv ers on my computer" .[...]

40 10. Click the “Have Disk” button. Click on the “Brow se” button and navigate to the following directory: X:Drivermodule name( where X is the driv e letter designator for the CD-ROM drive). 11. Select the "xxx.inf" file and click the “Open” button. Click the “OK” button. 12. Select your monitor model and click the “ [...]

41 Windows Vist a 1. Click "S tart " and "Control P ane l". Then, doubl e-click on " Appearance and Personalization". 2. Click "Personalization" and then "Dis play Settings". 3. Click "Advanced Settings...".[...]

42 4. Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means the configuration for your monitor is completed. The monitor can be used as is. If the message "Windows needs..." is displayed, as shown in the figure below , click "Continue". 5. Click "Update Dr[...]

43 Windows XP 1. S tart Windows® XP 2. Click on the 'S tart' button and t hen click on 'Control Panel'. 3. Select and click on the categor y ‘Ap pe aran ce and Themes’ 4. Click on the 'Display' Item.[...]

44 5. Select the 'Settings' tab then click on the 'Advanced' butt on. 6. Select 'Monitor' tab - If the 'Properties' button is inactive, it means your m onitor is properly configur ed. Please stop installation. - If the 'Properties' button is active, click on 'Properties' button. Please fol[...]

45 8. Select the 'Install from a list or specific location [ advanced]' radio button and the n click on the 'Next' button. 9. Select the 'Don't Search. I will choose the driver to install' radio button. Then click on the 'Next' button. 10. Click on the 'Have disk...' button, then click on the &[...]

46 Windows 2000 1. S tart Windows® 2000 2. Click on the 'St art' button, point to 'Se ttings', and then click on 'Control Panel'. 3. Double click on the ' Display' Icon. 4. Select the 'Settings' tab then click on 'Advanced...'. 5. Select 'Monitor' - If the 'Properties'[...]

47 i-Menu Welcome to “i-Menu” software by AOC. i-Menu makes it easy to adjust your monitor disp la y setting by using on screen menus instead of the OSD button on the monitor . T o complete installation, please follow the installation guide.[...]

48 e-Saver Welcome to use AOC e-Saver monitor po wer management software! The AOC e-Saver features Smart Shutdown functions for your monitors, all ows your monitor to timely shutdo wn when PC unit is at any status (On, Off, Sleep or Screen Saver); the actual shutdown time depends on your p references (see example below). Please click on "drive[...]

49 Screen+ Welcome to "Screen+" software by AOC, Screen+ software is a desktop screen splitting tool, it splits the desktop into different panes, each pane displays a different window . Y ou only need to drag the windo w to a correspondi ng pane, when you want to access it. It supports multiple m onitor display to make your task easier . [...]

50 T roubleshoot Problem & Question Possible Solutions Power LED Is Not ON Make sure the power button is ON and the Power Cord is properly connecte d to a grounded power outlet and to the monitor . No images on the screen Is the power cord connected properly? Check the power cord connection an d po wer supply . Is the signal cable connected cor[...]

51 Monitor Is Stu ck In A ctive Off-Mode" The Computer Power Switch should be in the ON position. The Computer Video Card should be snugly fitted in its slot. Make sure the monitor's video cable is prop erly connected to the computer . Inspect the monitor's video cable and mak e sure no pin is bent. Make sure your computer is operati[...]

52 S pecification General S pecification Panel Product name I2080SW Driving system TFT Color LCD Viewable Image Size 49.4cm diagonal Pixel pitch 0.2907mm(H) x 0.2915mm(V) Vi deo R, G, B Analog lnterface Separate Sy nc. H/V TTL Display Color 16.7M Colors Dot Clock 106.5MHz Extra Horizontal scan range 30 kHz - 83 kHz Horizontal scan Size (Maxi mum) 4[...]

53 Preset Display Modes ST AND RESOLUTION HORIZONT AL FREQUENCY(kHZ) V ERTICAL FREQUENCY(Hz) VGA 640×480 @60Hz 31.46 9 59.940 640×480 @72Hz 37.86 1 72.809 640×480 @75Hz 37.50 0 75.000 MAC MODE VGA 640 × 480@67Hz 35.000 66.667 IBMMODEDOS 720×400@70Hz 31.469 70.087 SVGA 800×600 @56Hz 35.15 6 56.250 800×600 @60Hz 37.87 9 60.317 800×600 @72Hz 4[...]

54 Pin Assignment s 15-Pin Color Display Signal Cable Pin No. Signal Name Pin No. Signal Name 1 Video-Red 9 +5V 2 Video-Green 10 Ground 3 Video-Blue 1 1 N.C. 4 N.C. 12 DDC-Serial data 5 Detect Cable 13 H-sync 6 GND-R 14 V -sync 7 GND-G 15 DDC-Serial clock 8 GND-B[...]

55 Regulation FCC Notice FCC Class B Radio Freq uency Interference St at ement W ARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to compl y with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pr ovide reasonabl e protectio n ag ainst harmfu l interference[...]

56 EPEA T Declaration EPEA T is a system to help purchasers in the public an d private sectors evaluate, compare and select des ktop computers, notebooks and monitors ba sed on their environmental attributes . EPEA T also provides a clear and consistent set of performance criteria for the design of products, and provides an opportunit y for manufac[...]

57 WEEE Declaration Disposal of W aste Equipment by Users in Pr ivate Household in the European Un ion. This symbol on the product or on its packaging indicates t hat this product must not be di sposed of with your other household wast e.Instead, it is yo ur responsibility to dis pose of your waste equipment by handing it ov er to a designated coll[...]

58 Service W arranty S t atement for Europe LIMITED THREE-YEAR W ARRANTY* For AOC LCD Monitors sold within Europe, AOC International (Europe) B. V . warrants this product to be free from defects in material and workmanship for a period of Three (3) years after the original date of consumer purchase. During this period, AOC Internation al (Europe) B[...]

59 All AOC LCD Monitors ar e produced according to the ISO 9241- 307 Class 1 pixel policy standards. If your warranty has expired, you still have access to all ava ilable service options, but you will be responsible for the cost of service, including parts, labor , shipping (if any) and applicable taxes. AOC Cert ified or Authorized Service Center [...]

60 W arranty St atement for Middle East and Africa (MEA) And The Commonwealth of Indepe ndent States (CIS) LIMITED ONE to THREE YEARS W ARRANTY* For AOC LCD Monitors sold within the Middle East and Africa (MEA) and the Common wealth of Independent S tates (CIS), AOC International (Europe) B.V . warrant s this product to be free from defects in mate[...]

61  Adjustment by non-authorized source  Repair , modification, or installation of options or parts by anyone other than an AOC Certified or Authorized Service Center  Improper environments like humidity , water damage and d usts  Damaged by violence, earthquakes and terr orist attacks  Excessive or inadequ ate heating or air conditi[...]

62 AOC International (Europe) B.V . Prins Bernhardplein 200 / 6th floor, Amsterdam, The Nethe rlands Tel: +31 (0)20 504 6962 • Fax: +31 (0)20 504693 3 AOC Pixel Policy ISO 9241-307 Class 1 July 25 th , 2013 AOC strives to deliver the highest quality products. W e us e some of the industry’s most advanced manufactu ring processes and practice st[...]

63 W arranty St atement for North & South America (excluding Brazil) W ARRANTY ST A TEMENT for AOC Color Monitors Including those Sold within North America as S pecified Envision Peripherals, Inc. warrants this product to be free from defects in material and workmanship for a period of three (3) years for parts & labor and one (1) year for [...]

64 MERCHANT ABILITY AND FIT NESS FOR A P ARTICULAR PURPOSE) ARE LIMIT ED IN DURA T ION TO A PERIOD OF THREE (3) YEA RS FOR P ARTS AND LABOR AND ONE (1) YEAR FOR CR T TUBE OR LCD P ANEL FROM THE ORIGINAL DA TE OF CONSUMER PURCHASE. NO W ARRANTIES (EITHER EXPRESSED OR IMPLIED) APPL Y AFTER THIS PERIOD. IN THE UNITE D ST A TES OF AMERICA, SOME ST A T [...]

65 EASE PROGRAME Only for AOC branded monitors sold w ithin the continental United States. All AOC branded monitors are now covered by the EASE Program . If your monitor malfunctions at any time during the first three months, AOC will provi de a replacement monitor within 72 hours after you are approved for our program. If your monitor qualifies fo[...]