APC AP89XX инструкция обслуживания

User Guide Switched Rack Power Distribution Unit AP89xx[...]

Contents Metered Rack PDU User Guide i Introduction ..................................................................... 1 Product Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Access Priorities for Logging on. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Types of User Accounts . . . . .[...]

Metered Rack PDU User Guide ii About the Main Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Using the Command Line Interface . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Command Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Command Response Codes . . . . . . .[...]

Metered Rack PDU User Guide iii Device Command Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 bkLowLoad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 bkNearOver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 bkOverLoad . . . . . . . .[...]

Metered Rack PDU User Guide iv Web Interface................................................................. 46 Supported Web Browsers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Logging On to the Web Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Overview . . . . . . . . . . . . . . . . . . . . . . . [...]

Metered Rack PDU User Guide v Outlet Settings for Outlets and Outlet Groups . . . . . . . . . . . . . . . . . 59 Initiate a control action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Configure outlet settings and the outlet name . . . . . . . . . . . . . . . 61 Scheduling Outlet Actions . . . . . . . . . . . . . . . . .[...]

Metered Rack PDU User Guide vi Administration: Network Features ............................... 73 TCP/IP and Communication Settings . . . . . . . . . . . . . . . . . . . . . . . . 73 TCP/IP settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 DHCP response options . . . . . . . . . . . . . . . . . . . . . .[...]

Metered Rack PDU User Guide vii Event Log and Temperature Units . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Color-code event log text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Change the default temperature scale . . . . . . . . . . . . . . . . . . . . . . . 92 Reset the Rack PDU . . . . . . . . . . . . . . .[...]

Metered Rack PDU User Guide viii Firmware File Transfer Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Using the Firmware Upgrade Utility . . . . . . . . . . . . . . . . . . . . . . . . 101 Use FTP or SCP to upgrade one Rack PDU . . . . . . . . . . . . . . . . . 101 Use XMODEM to upgrade one Rack PDU . . . . . . . . . . . . . . .[...]

Switched Rack PDU User Guide 1 Introduction Product Features The APC by Schneider Electric Switched Rack Power Distribution Unit (PDU) may be used as a stand- alone, network-manageable power distribution device or up to 4 devices can be connected together with one network connection. The Rack PDU provides real-time remote monitoring of connected lo[...]

2 Switched Rack PDU User Guide Access Priorities for Logging on Only one user at a time can log on to the Rack PDU. The priority for access, beginning with the highest priority , is as follows: • Local access to the command line interface from a computer with a direct serial connection to the Rack PDU • T elnet or Secure SHell (SSH) access to t[...]

Switched Rack PDU User Guide 3 W atchdog Features Overview T o detect internal problems and recover from unanticipated inputs, the Rack PDU uses internal, system- wide watchdog mechanisms. When it restarts to recover from an internal problem, a System: W armstart event is recorded in the event log. Network interface watchdog mechanism The Rack PDU [...]

4 Switched Rack PDU User Guide Specific assignment of Display IDs. Follow the instructions below before powering up any of the Rack PDUs in the group. If it is desired to have a specific assignment of Display IDs, this can be achieved by powering up the units for the first time in the desired order , 1 to 4. For example, before powering up any of t[...]

Switched Rack PDU User Guide 5 Establish Network Settings Note: Disregard the procedures described in this section if you have StruxureW are Data Center Expert as part of your system. See the documentation for your StruxureW are Data Center Expert for more information. Y ou must configure the following TCP/IP settings before the Rack PDU can operat[...]

6 Switched Rack PDU User Guide When the Rack PDU reboots, the BOOTP server provides it with the TCP/IP settings. • If you specified a bootup file name, the Rack PDU attempts to transfer that file from the BOOTP server using TFTP or FTP . The Rack PDU assumes all settings specified in the bootup file. • If you did not specify a bootup file name,[...]

Switched Rack PDU User Guide 7 Command Line Interface 1. Log on to the command line interface. See “Log on to the Command Line Interface” on page 14. 2. Contact your network administrator to obtain the IP address, subnet mask, and default gateway for the Rack PDU. 3. Use these three commands to configure network settings. (T ext in italics indi[...]

8 Switched Rack PDU User Guide Recovering from a Lost Password Y ou can use a local computer (a computer that connects to the Rack PDU or other device through the serial port) to access the command line interface. 1. Select a serial port at the local computer , and disable any service that uses that port. 2. Connect the serial cable (APC part numbe[...]

Switched Rack PDU User Guide 9 Rack PDU Front Panel Note: Y our APC product is configured so the display backlight turns off after 10 minutes of inactivity . The backlight can be turned on by depressing any button below the display . Item Function  Display Shows information about the Rack PDU. In normal operation, input voltage, current, and pow[...]

10 Switched Rack PDU User Guide Item Function  OK, W arning, Overload LED Indicates the status of the Rack PDU load. See “Load indicator LED” on page 13.  T emp/Humidity port Port for connecting an APC T emperature Sensor (AP9335T) or an APC T emperature/Humidity Sensor (AP9335TH).  In and Out ports For use with the Network Port Sharin[...]

Switched Rack PDU User Guide 11 Display T ree Example 1[...]

12 Switched Rack PDU User Guide Display T ree Example 2[...]

Switched Rack PDU User Guide 13 Network Status LED 10/100 LED Load indicator LED The load indicator LED identifies overload and warning conditions for the Rack PDU. Condition Description Off One of the following situations exists: • The Rack PDU is not receiving input power . • The Rack PDU is not operating properly . It may need to be repaired[...]

14 Switched Rack PDU User Guide Command Line Interface About the Command Line Interface Y ou can use the command line interface to view the status of and configure and manage the Rack PDU (and any connected Rack PDUs if using the Network Port Sharing Feature). In addition, the command line interface enables you to create scripts for automated opera[...]

Switched Rack PDU User Guide 15 Local access to the command line interface For local access, use a computer that connects to the Rack PDU through the serial port to access the command line interface: 1. Select a serial port at the computer and disable any service that uses that port. 2. Connect the serial cable (APC part number 940-0144A) from the [...]

16 Switched Rack PDU User Guide • A Stat field reports the Rack PDU status. Stat : P+ N4+ N6+ A+ Note: If P+ is not displayed, contact APC support staff. Using the Command Line Interface At the command line interface, use commands to configure the Rack PDU. T o use a command, type the command and press ENTER . Commands and arguments are valid in [...]

Switched Rack PDU User Guide 17 Command Syntax Example of a command that supports multiple options: user [-an <admin name>] [-ap <admin password>] In this example, the user command accepts the option -an , which defines the Administrator user name, and the option -ap , which defines the Administrator password. T o change the Administrat[...]

18 Switched Rack PDU User Guide Command Response Codes The command response codes enable scripted operations to detect error conditions reliably without having to match error message text: The CLI reports all command operations with the following format: E [0-9] [0-9] [0-9] : Error message Code Message E000 Success E001 Successfully Issued E002 Reb[...]

Switched Rack PDU User Guide 19 Network Management Card Command Descriptions Access: Administrator , Device User, Outlet User Description: V iew a list of all the CLI commands available to your account type. T o view help text for a specific command, type the command followed by a question mark. Example: T o view a list of options that are accepted[...]

20 Switched Rack PDU User Guide boot Access: Administrator only Description: Define how the Rack PDU will obtain its network settings, including the IP address, subnet mask, and default gateway . Then configure the BOOTP or DHCP server settings. Example: T o use a DHCP server to obtain network settings: 1. T ype boot -b dhcp 2. Enable the requireme[...]

Switched Rack PDU User Guide 21 console Access: Administrator only Description: Define whether users can access the command line interface using T elnet, which is enabled by default, or Secure SHell (SSH), which provides protection by transmitting user names, passwords, and data in encrypted form. Y ou can change the T elnet or SSH port setting for[...]

22 Switched Rack PDU User Guide date Access: Administrator only Definition: Configure the date used by the Rack PDU. T o configure an NTP server to define the date and time for the Rack PDU, see “Set the Date and T ime” on page 98. Example 1: T o display the date using the format yyyy-mm-dd, type: date -f yyyy-mm-dd Example 2: T o define the da[...]

Switched Rack PDU User Guide 23 dns Access: Administrator only Definition: Configure the manual Domain Name System (DNS) settings. eventlog Access: Administrator , Device User, Outlet User Description: V iew the date and time you retrieved the event log, the status of the Rack PDU, and the status of sensors connected to the Rack PDU. V iew the most[...]

24 Switched Rack PDU User Guide FTP Access: Administrator only Description: Enable or disable access to the FTP server . Optionally , change the port setting to the number of any unused port from 5001 to 32768 for added security . Example: T o change the TCP/IP port to 5001, type: ftp -p 5001 help Access: Administrator , Device User, Outlet User De[...]

Switched Rack PDU User Guide 25 ping Access: Administrator , Device User Description. Determine whether the device with the IP address or DNS name you specify is connected to the network. Four inquiries are sent to the address. Example: T o determine whether a device with an IP address of 150.250.6.10 is connected to the network, type: ping 150.250[...]

26 Switched Rack PDU User Guide radius Access: Administrator only Description: V iew the existing RADIUS settings, enable or disable RADIUS authentication, and configure basic authentication parameters for up to two RADIUS servers. For a summary of RADIUS server configuration and a list of supported RADIUS servers, see “Configure the RADIUS Serve[...]

Switched Rack PDU User Guide 27 resetT oDef Access: Administrator only Description: Reset all parameters to their default. Example: T o reset all of the configuration changes except the TCP/IP settings for the Rack PDU, type: resetToDef -p keepip snmp, snmpv3 Access: Administrator only Description: Enable or disable SNMP 1 or SNMP 3. Example: T o e[...]

28 Switched Rack PDU User Guide tcpip Access: Administrator only Description: V iew and manually configure these network settings for the Rack PDU: Example 1: T o view the network settings of the Rack PDU, type tcpip and press E NTER . Example 2: T o manually configure an IP address of 150.250.6.10 for the Rack PDU, type: tcpip -i 150.250.6.10 tcpi[...]

Switched Rack PDU User Guide 29 user Access: Administrator only Description: Configure the user name, password, and inactivity timeout for the Administrator , Device User , and Read-Only User account types. For information on the permissions granted to each account type, see “T ypes of User Accounts” on page 2. Example 1: T o change the Adminis[...]

30 Switched Rack PDU User Guide xferINI Access: Administrator only Description: Use XMODEM to upload an INI file while you are accessing the command line interface through a serial connection. After the upload completes: • If there are any system or network changes, the command line interface restarts and you must log on again. • If you selecte[...]

Switched Rack PDU User Guide 31 Device Command Descriptions Network Port Sharing Commands The Command Line Interface allows commands to be sent to guest Rack PDUs. The user may specify the Display ID of the Rack PDU to be commanded, followed by a colon, before the first argument (or as the first argument, if the command does not normally have ar gu[...]

32 Switched Rack PDU User Guide bkOverLoad Access: Administrator , Device User Description: Set or view the bank overload threshold current in amps. Y ou can specify all banks, a single bank, a range, or a comma-separated list of single banks and/or ranges. Example 1: T o set the bank overload threshold for all banks to 13A, type: apc> bkOverLoa[...]

Switched Rack PDU User Guide 33 devLowLoad Access: Administrator , Device User Description: Set or view the low-load threshold in kilowatts for the device. Example 1: T o view the low-load threshold, type: apc> dev E000: Success 0.5 kW Example 2: T o set the low-load threshold to 1 kW , type: apc> dev 1.0 E000: Success Example 3: T o set the [...]

34 Switched Rack PDU User Guide devReading Access: Administrator , Device User Description: V iew the total power in kilowatts or total energy in kilowatt-hours for the device. Example 1: T o view the total power , type: apc> devReading power E000: Success 5.2 kW Example 2: T o view the total energy , type: apc> devReading energy E000: Succes[...]

Switched Rack PDU User Guide 35 humLow Access: Administrator , Device User Description: Set or view the low humidity threshold as a percent of the relative humidity . Example 1: T o view the low humidity threshold, type: apc> humLow E000: Success 10 %RH Example 2: T o set the low humidity threshold, type: apc> humLow 12 E000: Success Example [...]

36 Switched Rack PDU User Guide olAssignUsr Access: Administrator Description: Assign control of outlets to an outlet user that exists in the local database. Example 1: T o assign a user named Bobby to outlets 3, 5 through 7, and 10, type: apc> olAssignUsr 3,5-7,10 bobby E000: Success Example 2: T o assign a user named Billy to all outlets, type[...]

Switched Rack PDU User Guide 37 olDlyOff Access: Administrator , Device User, and Outlet User , but only for outlets to which the user is assigned. Description: T urns off an outlet or group of outlets after the Power Of f Delay (see “olOffDelay” on page 41). Example 1: T o turn off outlets 3, 5 through 7, and 10, type: apc> olDlyOff 3,5-7,1[...]

38 Switched Rack PDU User Guide olDlyReboot Access: Administrator , Device User, and Outlet User , but only for outlets to which the user is assigned. Description: Cycles power to an outlet or a group of outlets. The specified outlets will be turned of f based on the configured Power Off Delay (see “olOf fDelay” on page 41). After the longest R[...]

Switched Rack PDU User Guide 39 olGroups Access: Administrator , Device User, and Outlet User . Description: List the outlet synchronization groups defined on the switched rack PDU. (See “Configure and Control Outlet Groups” on page 61 for more information.) Example 1: T o list outlet synchronization groups on the Host Rack PDU, type: apc> o[...]

40 Switched Rack PDU User Guide olName Access: Administrator , Device User, and Outlet User , but only for outlets to which the user is assigned. Description: Set or view the name configured for an outlet. Example: T o configure the name for outlet 3 to BobbysServer , type: apc> olName 3 BobbysServer E000: Success 3: BobbysServer 5: BillysServer[...]

Switched Rack PDU User Guide 41 olOffDelay Access: Administrator , Device User, and Outlet User , but only for outlets to which the user is assigned. Description: Set or view the time delay for the Off Delayed command (see “olDlyOf f” on page 37) and for a Reboot Delayed command (see “olDlyReboot” on page 38). Example 1: T o set a 9-second [...]

42 Switched Rack PDU User Guide olOnDelay Access: Administrator , Device User, and Outlet User , but only for outlets to which the user is assigned. Description: Set or view the time delay for the On Delayed command (see “olDlyOn” on page 37) and for or a Reboot Delayed command (see “olDlyReboot” on page 38). Example 1: T o set a 6-second d[...]

Switched Rack PDU User Guide 43 olRbootTime Access: Administrator , Device User, and Outlet User , but only for outlets to which the user is assigned. Description: Set or view the amount of time an outlet will remain off for a Reboot Delayed command (see “olDlyReboot” on page 38). Example 1: T o view the time set for outlets 3 and 5 through 7 t[...]

44 Switched Rack PDU User Guide olReboot Access: Administrator , Device User, and Outlet User , but only for outlets to which the user is assigned. Description: Cycle power to an outlet or group of outlets without any delays. If more than one outlet is specified, then those outlets will be cycled together . Example: T o reboot outlets 3 and 5 throu[...]

Switched Rack PDU User Guide 45 olUnasgnUsr Access: Administrator Description: Remove control of outlets from an outlet user that exists in the local database. Example 1: T o remove a user named Bobby from control of outlets 3, 5 through 7, and 10, type: apc> olUnasgnUsr 3,5-7,10 bobby E000: Success Example 2: T o remove a user named Billy from [...]

46 Switched Rack PDU User Guide phNearOver Access: Administrator , Device User Description: Set or view the phase near-overload threshold in kilowatts. T o specify phases, choose from the following options. T ype: all , a single phase, a range, or a comma-separated list of phases. Example 1: T o set the near-overload threshold for all phases to 10 [...]

Switched Rack PDU User Guide 47 phReading Access: Administrator , Device User Description: V iew the current, voltage, or power for a phase. Set or view the phase near-overload threshold in kilowatts. Y ou can specify all phases, a single phase, a range, or a comma-separated list of phases. Example 1: T o view the measurement for current for phase [...]

48 Switched Rack PDU User Guide prodInfo Access: Administrator , Device User, Outlet User Description: V iew information about the Rack PDU. Example 1: T o view the product information for this Rack PDU, type: apc> prodInfo E000: Success AOS X.X.X Switched Rack PDU X.X.X Model: AP8XXX Present Outlets: XX Switched Outlets: XX Metered Outlets: XX [...]

Switched Rack PDU User Guide 49 tempHigh Access: Administrator , Device User Description: Set or view the high-temperature threshold in either Fahrenheit or Celsius. Example 1: T o set the high-temperature threshold to 70º Fahrenheit, type: apc> tempHigh F 70 E000: Success Example 2: T o view the high-temperature threshold in Celsius, type: apc[...]

50 Switched Rack PDU User Guide userAdd Access: Administrator Description: Add an outlet user to the local user database. Example: T o add a user named Bobby , type: apc> userAdd Bobby E000: Success userDelete Access: Administrator Description: Remove an outlet user from the local user database. Example: T o remove a user named Bobby , type: apc[...]

Switched Rack PDU User Guide 51 whoami Access: Administrator , Device User, Outlet User Description: V iew the user name of the active user . Example: apc> whoami E000: Success admin[...]

52 Switched Rack PDU User Guide W eb Interface Supported W eb Browsers Y ou can use Microsoft ® Internet Explorer ® (IE) 7.x and higher (on W indows ® operating systems only) or Mozilla ® Firefox ® 3.0.6 or higher (on all operating systems) to access the Rack PDU through its W eb interface. Other commonly available browsers may work but have n[...]

Switched Rack PDU User Guide 53 URL address formats T ype the DNS name or IP address of the Rack PDU in the W eb browser ’ s URL address field and press E NTER . When you specify a non-default W eb server port in Internet Explorer , you must include http:// or https:// in the URL. Common browser error messages at log-on. URL format examples. • [...]

54 Switched Rack PDU User Guide W eb Interface Features Read the following to familiarize yourself with basic W eb interface features for your Rack PDU. T abs The following tabs are available: • Home : Appears when you log on. V iew active alarms, the load status of the Rack PDU , and the most recent Rack PDU events. For more information, see “[...]

Switched Rack PDU User Guide 55 Quick Links At the lower left on each page of the interface, there are three configurable links. By default, the links access the URLs for these W eb pages: • Link 1 : The home page of the APC W eb site • Link 2 : Demonstrations of APC W eb-enabled products • Link 3: Information on APC Remote Monitoring Service[...]

56 Switched Rack PDU User Guide Network Port Sharing on the W eb Interface Group Control using Network Port Sharing The web interface of the Rack PDU will have additional capabilities if the Rack PDU is part of a group. These capabilities are only displayed if the Rack PDU is part of a group. This includes a "Group Status" page, and the a[...]

Switched Rack PDU User Guide 57 Most of the web pages under the Home, Device Manager , and Environment tabs allow you to switch between Rack PDUs for viewing status and configuration/control. This switching is accomplished by selecting the Rack PDU Display ID of the unit you would like to view . This is located at the top right of each table that s[...]

58 Switched Rack PDU User Guide About the Home T ab Use the Home tab to view active alarms, the load status of the Rack PDU, and the most recent Rack PDU events. The Overview view Path: Home > Overview The top of the Overview indicates the alarm status. If one or more alarms are present, the number and type of alarms are indicated with a link to[...]

Switched Rack PDU User Guide 59 Device Management About the Device Manager T ab Path: Device Manager Use the Device Manager tab to: • V iew the load status for the Rack PDU • Manage and control outlets • Configure a name and location for the Rack PDU • V iew and manage the peak load measurement • Click user-configurable links to open web [...]

60 Switched Rack PDU User Guide Configure the Name and Location of the Rack PDU Path: Device Manager > Device Load The name and location you enter appear on the Home tab. Note: Y ou can set the Name and Location through either the Device Manager tab or the Administration tab. A change in one affects the other . 1. Click the Device Manager tab, t[...]

Switched Rack PDU User Guide 61 Set the Overload Outlet Restrictions Path: Device Manager > Phase Load and Bank Load Prevent users from applying power to outlets during an overload condition. Y ou can set the following restrictions for each phase and bank: • None : Users can apply power to outlets regardless of an Overload Alarm or Near Overlo[...]

62 Switched Rack PDU User Guide Purpose and benefits of outlet groups By using groups of synchronized outlets on Rack PDUs, you can ensure that outlets turn on, turn off, and reboot in a synchronized manner . Synchronizing control group actions through outlet groups provides the following benefits. • Synchronized shutdown and startup of the power[...]

Switched Rack PDU User Guide 63 Enable outlet groups Click the Device Manager tab and select Group Configuration from the Outlet Gr oups left navigation menu. Configure the following parameters, and click Apply . Enable creation of outlet groups. Enable support for global outlet groups (linked groups). Setting parameters for outlet groups using Net[...]

64 Switched Rack PDU User Guide Create multiple global outlet groups T o set up multiple global outlet groups that link to outlet groups on other Rack PDUs: 1. From the Device Manager tab, select Information from the Outlet Groups left navigation menu. 2. Make sure outlet groups are enabled. (See “Enable outlet groups” on page 63.) 3. Click Cre[...]

Switched Rack PDU User Guide 65 T ypical outlet group configurations The following configuration shows two Rack PDUs, each with eight outlet groups. Each outlet group consists of a single global outlet. Each outlet group  on the first Rack PDU is linked to the outlet group  in the same location on the second Rack PDU. One power cord of a dual[...]

66 Switched Rack PDU User Guide V erify your setup and configuration for global outlet groups T o ensure that your setup meets all system requirements for outlet groups and that you have configured the outlet groups correctly , select Information from the Outlet Groups left navigation menu in the W eb interface to view the groups and their connecti[...]

Switched Rack PDU User Guide 67 Control actions you can select . Option Description No Action Do nothing. On Immediate Apply power to the selected outlets. On Delayed Apply power to each selected outlet according to its value for Power On Delay . † Off Immediate Remove power from the selected outlets. Off Delayed Remove power from each selected o[...]

68 Switched Rack PDU User Guide Configure outlet settings and the outlet name The following settings are available: T o configure outlet settings or outlet names, select the Device Manager tab and then Configuration from the left navigation menu. Click the Configure Multiple Outlets button in the Outlet Configuration section or click the outlet nam[...]

Switched Rack PDU User Guide 69 Schedule Outlet Actions Actions you can schedule T o configure values for Power On Delay , Power Off Delay , and Reboot Duration for each outlet, see “Configure outlet settings and the outlet name” on page 68. Although you must use the W eb interface to schedule outlet actions, you can set these values in either [...]

70 Switched Rack PDU User Guide Edit, disable, enable, or delete a scheduled outlet event 1. At the W eb interface, select the Device Manager tab and then Scheduling from the left navigation menu. 2. In the event list in the Scheduled Outlet Action section of the Scheduling page, click on the name of the event. 3. On the Daily/W eekly scheduled act[...]

Switched Rack PDU User Guide 71 Environment Configure T emperature and Humidity Sensors Path: Environment Through the Environment tab, when you have a temperature or a temperature and humidity sensor connected to the Rack PDU, you can set thresholds for W arning and Critical alarm generation (see “Device status icons” on page 54 for details on [...]

72 Switched Rack PDU User Guide Logs Use the Event and Data Logs Event log Path: Logs > Events > options Y ou can view , filter , or delete the event log. By default, the log displays all events recorded during the last two days in reverse chronological order . For lists of all configurable events and their current configuration, select the A[...]

Switched Rack PDU User Guide 73 T o filter the log (Logs > Events > log): • Filtering the log by date or time: T o display the entire event log, or to change the number of days or weeks for which the log displays the most recent events, select Last . Select a time range from the drop-down menu, then click Apply . The filter configuration is[...]

74 Switched Rack PDU User Guide Data log Path: Logs > Data > options The data log records the current and power for the device, phase, and banks, as well as temperature and humidity at the specified time interval. Each entry is listed by the date and time the data was recorded. T o display the data log (Logs > Data > log): • By defaul[...]

Switched Rack PDU User Guide 75 T o configure data log rotation (Logs > Data > rotation): Set up a password-protected data log repository on a specified FTP server . Enabling rotation causes the contents of the data log to be appended to the file you specify by name and location. Updates to this file occur at the upload interval you specify .[...]

76 Switched Rack PDU User Guide Use FTP or SCP to retrieve log files An Administrator or Device User can use FTP or SCP to retrieve a tab-delineated event log file ( event.txt ) or data log file ( data.txt ) and import it into a spreadsheet. • The file reports all events or data recorded since the log was last deleted or (for the data log) trunca[...]

Switched Rack PDU User Guide 77 Administration: Security Local Users Setting user access Path: Administration > Security > Local Users > options The Administrator user account always has access to the Rack PDU. The Device User and Read-Only User accounts are enabled by default. T o disable the Device User or Read-Only User accounts, select[...]

78 Switched Rack PDU User Guide Select one of the following: • Local Authentication Only : RADIUS is disabled. Local authentication is enabled. • RADIUS, then Local Authentication : RADIUS and local authentication are enabled. Authentication is requested from the RADIUS server first. If the RADIUS server fails to respond, local authentication i[...]

Switched Rack PDU User Guide 79 Configure the RADIUS Server Summary of the configuration procedure Y ou must configure your RADIUS server to work with the Rack PDU. For examples of the RADIUS users file with V endor Specific Attributes (VSAs) and an example of an entry in the dictionary file on the RADIUS server , see the Security Handbook . 1. Add[...]

80 Switched Rack PDU User Guide RADIUS and Network Port Sharing Note: See the Security Handbook for APC Network Management Cards for more information on using RADIUS. For RADIUS users file with VSAs, outlets on guest Rack PDUs can be associated to RADIUS users by using the following method. # give user access to outlets 1, 2, and 3 on unit 1, # out[...]

Switched Rack PDU User Guide 81 Administration: Network Features TCP/IP and Communication Settings TCP/IP settings Path: Administration > Network > TCP/IP The TCP/IP option on the left navigation menu, selected by default when you choose Network on the top menu bar , displays the current IPv4 address, subnet mask, default gateway , MAC addres[...]

82 Switched Rack PDU User Guide DHCP response options Each valid DHCP response contains options that provide the TCP/IP settings that the Rack PDU needs to operate on a network, and other information that affects the operation of the Rack PDU. V endor Specific Information (option 43). The Rack PDU uses this option in a DHCP response to determine wh[...]

Switched Rack PDU User Guide 83 Path: Administration > Network > TCP/IP > IPv6 settings Port Speed Path: Administration > Network > Port Speed The Port Speed setting defines the communication speed of the TCP/IP port. • For Auto-negotiation (the default), Ethernet devices negotiate to transmit at the highest possible speed, but if [...]

84 Switched Rack PDU User Guide DNS Path: Administration > Network > DNS > options Use the options under DNS to configure and test the Domain Name System (DNS): • Select Primary DNS Server or Secondary DNS Server to specify the IPv4 or IPv6 addresses of the primary and optional secondary DNS server . For the Rack PDU to send e-mail, you [...]

Switched Rack PDU User Guide 85 W eb Path: Administration > Network > Web > options Option Description access T o activate changes to any of these selections, log off from the Rack PDU: • Disable : Disables access to the W eb interface. (T o re-enable access, log in to the command line interface, then type the command http -S enable . Fo[...]

86 Switched Rack PDU User Guide Console Path: Administration > Network > Console > options Note: T o use SSH, you must have an SSH client installed. Most Linux and other UNIX platforms include an SSH client, but Microsoft W indows operating systems do not. Clients are available from various vendors. Option Description access Choose one of [...]

Switched Rack PDU User Guide 87 SNMP All user names, passwords, and community names for SNMP are transferred over the network as plain text. If your network requires the high security of encryption, disable SNMP access or set the access for each community to Read. (A community with Read access can receive status information and use SNMP traps.) Whe[...]

88 Switched Rack PDU User Guide SNMPv1 Path: Administration > Network > SNMPv1 > options Option Description access Enable SNMPv1 Access: Enables SNMP version 1 as a method of communication with this device. access control Y ou can configure up to four access control entries to specify which Network Management Systems (NMSs) have access to [...]

Switched Rack PDU User Guide 89 SNMPv3 Path: Administration > Network > SNMPv3 > options For SNMP GET s, SET s, and trap receivers, SNMPv3 uses a system of user profiles to identify users. An SNMPv3 user must have a user profile assigned in the MIB software program to perform GET s and SET s, browse the MIB, and receive traps. Note: T o us[...]

90 Switched Rack PDU User Guide FTP Server Path: Administration > Network > FTP Server The FTP Server settings enable (by default) or disable access to the FTP server and specify the TCP/IP port (21 by default) that the FTP server uses to communicate with the Rack PDU. The FTP server uses both the specified port and the port one number lower [...]

Switched Rack PDU User Guide 91 Administration: Notification Event Actions Path: Administration > Notification > Event Actions > options T ypes of notification Y ou can configure event actions to occur in response to an event or group of events. These actions notify users of the event in any of several ways: • Active, automatic notificat[...]

92 Switched Rack PDU User Guide Configure by event. T o define event actions for an individual event: 1. Select the Administration tab, Notification on the top menu bar, and by event under Event Actions on the left navigation menu. 2. In the list of events, review the marked columns to see whether the action you want is already configured. (By defa[...]

Switched Rack PDU User Guide 93 Active, Automatic, Direct Notification E-mail notification Overview of setup. Use the Simple Mail T ransfer Protocol (SMTP) to send e-mail to up to four recipients when an event occurs. T o use the e-mail feature, you must define the following settings: • The IP addresses of the primary and, optionally , the second[...]

94 Switched Rack PDU User Guide E-mail test. Path: Administration > Notification > E-mail > test Send a test message to a configured recipient. SMTP Server Select one of the following methods for routing e-mail: • Local : Through the Rack PDU’ s SMTP server . This setting (recommended) ensures that the e-mail is sent before the Rack PD[...]

Switched Rack PDU User Guide 95 SNMP traps T rap Receivers. Path: Administration > Notification > SNMP T raps > trap receivers V iew trap receivers by NMS IP/Host Name. Y ou can configure up to six trap receivers. • T o configure a new trap receiver , click Add T rap Receiver . • T o modify or delete a trap receiver , first click its I[...]

96 Switched Rack PDU User Guide Remote Monitoring Service Path: Administration > Notification > Remote Monitoring The APC Remote Monitoring Service (RMS) is an optional service that monitors your system from a remote operation center 24 hours a day , 7 days a week, and notifies you of device and system events. T o purchase the APC RMS service[...]

Switched Rack PDU User Guide 97 Syslog settings. Path: Logs > Syslog > settings Syslog test and format example. Path: Logs > Syslog > test Send a test message to the Syslog servers configured through the servers option. 1. Select a severity to assign to the test message. 2. Define the test message, according to the required message fiel[...]

98 Switched Rack PDU User Guide Administration: General Options Identification Path: Administration > General > Identification Define the Name (the device name), Location (the physical location), and Contact (the person responsible for the device) used by StruxureW are Data Center Expert and the SNMP agent of the Rack PDU. These settings are [...]

Switched Rack PDU User Guide 99 Daylight saving Path: Administration > General > Date & Time > daylight saving Enable traditional United States Daylight Saving T ime (DST), or enable and configure a customized daylight saving time to match how Daylight Saving T ime is implemented in your local area. DST is disabled by default. When cus[...]

100 Switched Rack PDU User Guide Event Log and T emperature Units Path: Administration > General > Preferences Color-code event log text This option is disabled by default. Mark the Event Log Color Coding checkbox to enable color -coding of alarm text recorded in the event log. System-event entries and configuration-change entries do not chan[...]

Switched Rack PDU User Guide 101 Configure Links Path: Administration > General > Quick Links Select the Administration tab, General on the top menu bar , and Quick Links on the left navigation menu to view and change the URL links displayed at the bottom left of each page of the interface. By default, these links access the following W eb pa[...]

102 Switched Rack PDU User Guide Device IP Configuration Wizard Capabilities, Requirements, and Installation How to use the Wizard to configure TCP/IP settings The Device IP Configuration W izard configures the IP address, subnet mask, and default gateway of one or more Rack PDUs or network-enabled devices (devices containing an embedded APC Networ[...]

Switched Rack PDU User Guide 103 Run the Wizard to perform the configuration. T o discover and configure the unconfigured Rack PDUs or network-enabled devices over the network: 1. From the Start menu, launch the W izard. The W izard detects the first Rack PDU or network- enabled device that is not configured. 2. Select Remotely (over the network) ,[...]

104 Switched Rack PDU User Guide How to Export Configuration Settings Retrieving and Exporting the .ini File Summary of the procedure An Administrator can retrieve the .ini file of a Rack PDU and export it to another Rack PDU or to multiple Rack PDUs. 1. Configure a Rack PDU to have the settings you want to export. 2. Retrieve the .ini file from th[...]

Switched Rack PDU User Guide 105 Detailed procedures Retrieving. T o set up and retrieve an .ini file to export: 1. If possible, use the interface of a Rack PDU to configure it with the settings to export. Directly editing the .ini file risks introducing errors. 2. T o use FTP to retrieve config.ini from the configured Rack PDU: a. Open a connectio[...]

106 Switched Rack PDU User Guide T ransferring the file to a single Rack PDU. T o transfer the .ini file to another Rack PDU, do either of the following: • From the W eb interface of the receiving Rack PDU, select the Administration tab, General on the top menu bar , and User Config File on the left navigation menu. Enter the full path of the fil[...]

Switched Rack PDU User Guide 107 The Upload Event and Error Messages The event and its error messages The following event occurs when the receiving Rack PDU completes using the .ini file to update its settings. Configuration file upload complete, with number valid values If a keyword, section name, or value is invalid, the upload by the receiving R[...]

108 Switched Rack PDU User Guide File T ransfers How to Upgrade Firmware Benefits of upgrading firmware When you upgrade the firmware on the Rack PDU: • Y ou obtain the latest bug fixes and performance improvements. • New features become available for immediate use. Keeping the firmware versions consistent across your network ensures that all R[...]

Switched Rack PDU User Guide 109 Using the Firmware Upgrade Utility This Firmware Upgrade Utility is part of the firmware upgrade package available on the APC W eb site. ( Never use an Upgrade Utility designated for one product to upgrade the firmware of another product). Using the Utility for upgrades on Windows systems. On any supported W indows [...]

110 Switched Rack PDU User Guide SCP . T o use Secure CoPy (SCP) to upgrade firmware for the Rack PDU, follow these steps (this procedure assumes bootmon does not need upgrading, it is always necessary to upgrade the other two though): 1. Locate the firmware modules, see “Using the Utility for manual upgrades, primarily on Linux.” . 2. Use an S[...]

Switched Rack PDU User Guide 111 How to upgrade multiple Rack PDUs Firmware Upgrade Utility . Use this for multiple firmware updates in IPv4 if you have W indows. The utility records all upgrade steps in a log as a good reference to validate the upgrade. Export configuration settings. Y ou can create batch files and use a utility to retrieve config[...]

If you are unsure whether to upgrade any particular module, then upgrading all three is recommended. 1. Obtain the latest firmware files. See “T o extract the firmware files:” on page 109. 2. Create a folder on your flash drive called apcfirm . 3. From the latest firmware files that you downloaded, add to the apcfirm folder the binary files for[...]

Switched Rack PDU User Guide 113 V erifying Upgrades and Updates V erify the success or failure of the transfer T o verify whether a firmware upgrade succeeded, use the xferStatus command in the command line interface to view the last transfer result, or use an SNMP GET to the mfiletransferStatusLastT ransferResult OID. Last T ransfer Result codes [...]

114 Switched Rack PDU User Guide T roubleshooting Rack PDU Access Problems For problems that persist or are not described here, see the back cover of this manual. Problem Solution Unable to ping the Rack PDU If the Rack PDU’ s Status LED is green, try to ping another node on the same network segment as the Rack PDU. If that fails, it is not a pro[...]

Switched Rack PDU User Guide 115 Appendix A: List of Supported Commands Network Management Card Command Descriptions ? about alarmcount [-p [all | warning | critical]] appcli boot [-b <dhcpBootp | dhcp | bootp | manual>] [-c <dhcp cookie> [enable | disable]] [-v <vendor class>] [-i <client id>] [-u <user class>] cd dat[...]

116 Switched Rack PDU User Guide radius [-a <local | radiusLocal | radius> (Access)] [-p1 <primary server>] [-s1 <primary server secret>] [-t1 <primary server timeout>] [-p2 <secondary server>] [-s2 <secondary server secret>] [-t2 <secondary server timeout>]reboot reboot resetT oDef [-p [all | keepip]] snmp[...]

Switched Rack PDU User Guide 117 Device Command Descriptions bkLowLoad [[id#:]<“all” | bank#> <current>] bkNearOver [[id#:]<“all” | bank#> <current>] bkOverLoad [<“all” | bank#> <current>] bkReading [[id#:]<“all” | bank#>] devLowLoad [[id#:]<power>] devNearOver [[id#:]<power>] de[...]

118 Switched Rack PDU User Guide olOn [[id#:]<“all” | outlet name | outlet#>] olOnDelay [[id#:]<“all” | outlet name | outlet#> <time>] olRbootT ime [[id#:]<“all” | outlet name | outlet#> <time>] olReading [[id#:]<all | outlet name | outlet#> <current | power | energy>] olReboot [[id#:]<“all[...]

10/2012 990-3430C-001 APC W orldwide Customer Support Customer support for this or any other APC product is available at no charge in any of the following ways: • V isit the APC W eb site to access documents in the APC Knowledge Base and to submit customer support requests. – www .apc.com (Corporate Headquarters) Connect to localized APC W eb s[...]