Asrock M3A785GXH/128M инструкция обслуживания

1 1 1 1 1 M3A785GXH/128M User Ma nual V ersion 1.0 Published July 2009 Copyright©2009 ASRock INC. All rights reserved.[...]

2 2 2 2 2 Copyright Notice: Copyright Notice: Copyright Notice: Copyright Notice: Copyright Notice: No part of this manual may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purcha ser for ba ckup purpose, without written consent of ASRock Inc. Products[...]

3 3 3 3 3 Contents Contents Contents Contents Contents 1. 1. 1. 1. 1. Introduction Introduction Introduction Introduction Introduction ........................................................... ........................................................... ........................................................... ...................................[...]

4 4 4 4 4 2.18.2 Installing Windows ® Vista TM / Vista TM 64-bit Without RAID Functions ...................................................................... 52 2.19 U ntied Overclocking T echnology .............................................. 53 3. 3. 3. 3. 3. BIOS S BIOS S BIOS S BIOS S BIOS S ETUP UTILITY ETUP UTILITY ETUP UTILITY ETUP UTILI[...]

5 5 5 5 5 1. 1. 1. 1. 1. Introduction Introduction Introduction Introduction Introduction Tha nk you for purcha sing ASRock M3A785GXH/128M motherboard, a relia ble motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performa nce with robust design conf orming to ASRock’s commitment to qual- ity a nd[...]

6 6 6 6 6 1.2 1.2 1.2 1.2 1.2 Specifications Specifications Specifications Specifications Specifications Platform - A TX Form Fa ctor: 12.0-in x 8.8-in, 30.5 cm x 22.4 cm - All Solid Ca pacitor de sign (100% Ja pa n-made high-quality Conductive Polymer Ca pa citors) CPU - Support f or Socket AM3 processors: AMD Phenom TM II X4 / X3 / X2 (except 920[...]

7 7 7 7 7 LAN - PCIE x1 Gigabit LAN 10/100/1000 Mb/s - Realtek RTL81 1 1DL - Supports Wake-On-LAN Rear Panel I/O I/O Panel - 1 x PS/2 Keyboard Port - 1 x V GA/D-Sub Port - 1 x V GA/D VI-D Port - 1 x HDMI Port - 1 x Optical SPDIF Out Port - 1 x IEEE 1394 Port - 1 x eSA T AII Port - 6 x Ready-to-Use USB 2.0 Ports - 1 x RJ-45 LAN Port with LED (ACT/LI[...]

8 8 8 8 8 WARNING Plea se realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, a pplying U ntied Overclocking T e chnology , or using the third- party overclocking tools. Overclocking may affect your system stability, or even cause da mage to the components and devices of your system. It shou[...]

9 9 9 9 9 4. Due to the operating system limitation, the a ctual memory size may be less tha n 4GB for the reservation f or system usage under Windows ® XP and Windows ® V ista TM . For Windows ® XP 64-bit a nd Windows ® Vista TM 64-bit with 64-bit CPU, there is no such limitation. 5. If you wa nt to use CrossFireX TM or 3-W ay CrossFireX TM fu[...]

10 10 10 10 10 14. ASRock In stant Fla sh is a BIOS fla sh utility embedded in Fla sh ROM. This convenient BIOS update tool allows you to update system BIOS without entering operating systems first like MS-DOS or Windows ® . With this utility, you can press <F6> key during the POST or press <F2> key to BIOS setup menu to a ccess ASRock[...]

11 11 11 11 11 1.3 1.3 1.3 1.3 1.3 T T T T T wo CrossF wo CrossF wo CrossF wo CrossF wo CrossF ireX ireX ireX ireX ireX TM TM TM TM TM Graphics Card Suppor Graphics Card Suppor Graphics Card Suppor Graphics Card Suppor Graphics Card Suppor t List t List t List t List t List (for Windows ® XP / XP 64-bit / Vista TM / Vista TM 64-bit) Chipset Model [...]

12 12 12 12 12 1.5 1.5 1.5 1.5 1.5 Minimum Hardware Requirement for 1080p Blu-ray Minimum Hardware Requirement for 1080p Blu-ray Minimum Hardware Requirement for 1080p Blu-ray Minimum Hardware Requirement for 1080p Blu-ray Minimum Hardware Requirement for 1080p Blu-ray (BD) / HD (BD) / HD (BD) / HD (BD) / HD (BD) / HD -D -D -D -D -D VD Playback Sup[...]

13 13 13 13 13 1.6 1.6 1.6 1.6 1.6 P P P P P assed 1080p Blu-ray (BD) / HD assed 1080p Blu-ray (BD) / HD assed 1080p Blu-ray (BD) / HD assed 1080p Blu-ray (BD) / HD assed 1080p Blu-ray (BD) / HD -D -D -D -D -D VD F VD F VD F VD F VD F ilms in Our L ilms in Our L ilms in Our L ilms in Our L ilms in Our L ab ab ab ab ab T T T T T est est est est est [...]

14 14 14 14 14 1.7 Motherboard Layout 1.7 Motherboard Layout 1.7 Motherboard Layout 1.7 Motherboard Layout 1.7 Motherboard Layout IDE1 SOCKET AM3 FSB800 DDR3_A1 (64 bit, 240-pin module) DDR3_B1 (64 bit, 240-pin module) FSB800 DDR3_A2 (64 bit, 240-pin module) DDR3_B2 (64 bit, 240-pin module) AMD SB710 Chipset PS2_USB_PW1 1 ATX12V1 CPU_FAN1 8Mb BIOS [...]

15 15 15 15 15 1.8 1.8 1.8 1.8 1.8 I/O P I/O P I/O P I/O P I/O P anel anel anel anel anel ** If you use 2-channel spe aker , plea se connect the spea ker’s plug into “Front Spea ker Ja ck”. See the table below f or connection details in a ccordance with the type of spe aker you use. T ABLE for Audio Output Connection Audio Output Cha nnels Fr[...]

16 16 16 16 16 2. 2. 2. 2. 2. Installation Installation Installation Installation Installation This is a n A TX form fa ctor (12.0-in x 8.8-in, 30.5 cm x 22.4 cm) motherboard. Before you install the motherboard, study the conf iguration of your cha ssis to en- sure that the motherboard fits into it. Pre-installation Precautions Pre-installation Pre[...]

17 17 17 17 17 2.1 2.1 2.1 2.1 2.1 CPU Installation CPU Installation CPU Installation CPU Installation CPU Installation Step 1. U nlock the socket by lifting the lever up to a 90 o a ngle. Step 2. Position the CPU directly above the socket such that the CPU corner with the golden triangle matches the socket corner with a small triangle. Step 3. Car[...]

18 18 18 18 18 2.3 Installation of Memory Modules (DIMM) 2.3 Installation of Memory Modules (DIMM) 2.3 Installation of Memory Modules (DIMM) 2.3 Installation of Memory Modules (DIMM) 2.3 Installation of Memory Modules (DIMM) This motherboard provides f our 240-pin DDR3 (Double Data Rate 3) DIMM slots, a nd supports Dual Cha nnel Memory T echnology [...]

19 19 19 19 19 notch break notch break Installing a DIMM Installing a DIMM Installing a DIMM Installing a DIMM Installing a DIMM Plea se make sure to disconnect power supply bef ore adding or removing DIMMs or the system components. Step 1. Unlock a DIMM slot by pressing the retaining clips outward. Step 2. Align a DIMM on the slot such that the no[...]

20 20 20 20 20 2.4 Expansion Slots (PCI and PCI Express Slots) 2.4 Expansion Slots (PCI and PCI Express Slots) 2.4 Expansion Slots (PCI and PCI Express Slots) 2.4 Expansion Slots (PCI and PCI Express Slots) 2.4 Expansion Slots (PCI and PCI Express Slots) There are 2 PCI slots and 4 PCI Expre ss slots on this motherboard. PCI Slots: PCI slots are us[...]

21 21 21 21 21 Installing an expansion card Installing an expansion card Installing an expansion card Installing an expansion card Installing an expansion card Step 1. Before in stalling the expa nsion card, plea se ma ke sure that the power supply is switched off or the power cord is unplugged. Ple a se read the documentation of the expa nsion car[...]

22 22 22 22 22 2. If you have installed onboard V GA driver from our support CD to your system alrea dy , you ca n freely enjoy the benefits of dual monitor function after your system boots. If you haven’t installed onboard V GA driver yet, ple a se install onboard V GA driver from our support CD to your system a nd re start your computer . Then [...]

23 23 23 23 23 Surround Display Feature This motherboard supports surround display upgrade. With the internal V GA output support (D VI-D, D-Sub a nd HDMI) a nd external add-on PCI Express V GA cards, you ca n ea sily enjoy the benefits of surround display feature. Plea se refer to the following steps to set up a surround display environment: 1. Re[...]

24 24 24 24 24 HDCP Function HDCP function is supported on this motherboard. T o use HDCP function with this motherboard, you need to adopt the monitor that supports HDCP function a s well. Theref ore, you ca n enjoy the superior display quality with high-definition HDCP encryption contents. Ple a se refer to below instruction for more details abou[...]

25 25 25 25 25 1. If a customer incorrectly configures their system they will not see the performa nce benefits of CrossFireX TM . All three CrossFireX TM components, a CrossFireX TM Rea dy gra phics card, a CrossFireX TM Rea dy motherboard and a CrossFireX TM Edition co-processor gra phics card, must be installed correctly to benefit from the Cros[...]

26 26 26 26 26 Step 2. T o cha nge it to CrossFireX TM mode, you need to reverse the direction of ASRock SLI/XFire Switch Card. Plea se simulta neously pull open both the retention arms that hold the card in position. The card itself will spring away from the retention slot. T a ke it out gently by holding its edges, a nd keep away from touching th[...]

27 27 27 27 27 Step 6. Install one Ra deon gra phics card to PCIE3 slot. For the proper installation procedures, plea se refer to section “Expa nsion Slots”. CrossFire TM Bridge Step 8. Connect the D VI monitor cable to the D VI connector on the Radeon gra phics card on PCIE2 slot. (Y ou may use the D VI to D-Sub ada pter to convert the D VI co[...]

28 28 28 28 28 2.6.1.2 Installing Three CrossFireX 2.6.1.2 Installing Three CrossFireX 2.6.1.2 Installing Three CrossFireX 2.6.1.2 Installing Three CrossFireX 2.6.1.2 Installing Three CrossFireX TM TM TM TM TM -Ready Graphics -Ready Graphics -Ready Graphics -Ready Graphics -Ready Graphics Cards Cards Cards Cards Cards Step 1. Follow ste p 1 to 4 on[...]

29 29 29 29 29 CrossFire TM Bridge Step 6. Connect the D VI monitor cable to the D VI connector on the Radeon gra phics card on PCIE2 slot. (Y ou may use the D VI to D-Sub ada pter to convert the D VI connector to D-Sub interface, a nd then connect the D-Sub monitor cable to the D VI to D-Sub a da pter .) Step 7. Connect a 4-pin A TX power cable to[...]

30 30 30 30 30 Step 6. Double-click “A TI Catalyst Control Center”. Click “View”, select “CrossFireX TM ”, a nd then check the item “Ena ble CrossFireX TM ”. Select “2 GPUs” a nd click “Apply” (if you install two Ra deon gra phics cards). Select “3 GPUs” a nd click “OK” (if you install three Radeon gra phics cards). [...]

31 31 31 31 31 Although you have selected the option “Enable CrossFire TM ”, the CrossFireX TM function may not work a ctually . Y our computer will automatically reboot. After restarting your computer , plea se confirm whether the option “Ena ble CrossFire TM ” in “A TI Catalyst Control Center” is selected or not; if not, plea se selec[...]

32 32 32 32 32 2.7 2.7 2.7 2.7 2.7 Hybrid CrossFireX Hybrid CrossFireX Hybrid CrossFireX Hybrid CrossFireX Hybrid CrossFireX TM TM TM TM TM Operation Guide Operation Guide Operation Guide Operation Guide Operation Guide This motherboard supports A TI TM Hybrid CrossFireX TM feature. A TI TM Hybrid CrossFireX TM brings multi-GPU performa nce capa bi[...]

33 33 33 33 33 * Hybrid CrossFireX TM a ppearing here is a registered tra demark of A TI TM T echnologies Inc., and is used only f or identification or expla nation a nd to the owners’ benefit, without intent to infringe. * For further information of A TI TM Hybrid CrossFireX TM technology , please che ck AMD website for up dates a nd details. St[...]

34 34 34 34 34 +5V 1_2 +5VSB 2_3 2.8 2.8 2.8 2.8 2.8 Jumpers Setup Jumpers Setup Jumpers Setup Jumpers Setup Jumpers Setup The illustration shows how jumpers are setup. When the jumper ca p is placed on pin s, the jumper is “Short”. If no jumper ca p is placed on pins, the jumper is “Open”. The illustration shows a 3-pin jumper whose pin1 a[...]

35 35 35 35 35 FLOPPY 1 Pin 1 the red-striped side to Pin1 2.9 Onboard Headers and Connectors 2.9 Onboard Headers and Connectors 2.9 Onboard Headers and Connectors 2.9 Onboard Headers and Connectors 2.9 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper ca ps over these hea ders a nd connectors. Placi[...]

36 36 36 36 36 USB 2.0 Headers Besides six default USB 2.0 (9-pin USB10_1 1) ports on the I/O pa nel, there are (see p.14 No. 27) three USB 2.0 headers on this motherboard. Ea ch USB 2.0 hea der ca n support two USB 2.0 ports. (9-pin USB8_9) (see p.14 No. 29) (9-pin USB6_7) (see p.14 No. 28) Infrared Module Header This hea der supports a n (5-pin I[...]

37 37 37 37 37 1. High Definition Audio supports Ja ck Sensing, but the pa nel wire on the cha ssis must support HDA to function corre ctly . Plea se follow the instruction in our ma nual a nd cha ssis manual to in stall your system. 2. If you use AC’97 audio panel, ple a se install it to the front panel audio header a s below: A. Connect Mic_IN [...]

38 38 38 38 38 A TX 12V Power Connector Plea se connect an A TX 12 V (8-pin A TX12V1) power supply to this connector. (see p.14 No. 1) CPU Fan Connector Ple a se connect the CPU fa n (4-pin CPU_FAN1) cable to this connector and (see p.14 No. 3) match the bla ck wire to the ground pin. Though this motherboard provides 4-Pin CPU fan (Quiet Fan) suppo[...]

39 39 39 39 39 Serial port Header This COM1 header supports a (9-pin COM1) serial port module. (see p.14 No.32) CCTS#1 DDSR#1 DDTR#1 RRXD1 DDCD#1 TTXD1 GND RRTS#1 RRI#1 1 HDMI_SPDIF Header HDMI_SPDIF header, providing (3-pin HDMI_SPDIF1) SPDIF audio output to HDMI V GA (see p.14 No. 35) card, allows the system to c o n nect HDMI Digital TV/ project[...]

40 40 40 40 40 C B G N D + 5 V S P D IFO U T blue black blue black G N D S P D IFO U T blue black G N D S P D IFO U T A HDMI_SPDIF Cable P l ease connect the bla ck end (A) (Optional) of HDMI_SPDIF cable to the HDMI_SPDIF header on the motherboard. Then connect the white end (B or C) of HDMI_SPDIF cable to the HDMI_SPDIF connector of HDMI V GA card[...]

41 41 41 41 41 2.10 HDMI_SPDIF Header Connection Guide 2.10 HDMI_SPDIF Header Connection Guide 2.10 HDMI_SPDIF Header Connection Guide 2.10 HDMI_SPDIF Header Connection Guide 2.10 HDMI_SPDIF Header Connection Guide HDMI (High-Definition Multi-media Interfa ce) is a n all-digital audio/video specification, which provides a n interfa ce between any c[...]

42 42 42 42 42 2.11 2.11 2.11 2.11 2.11 SA SA SA SA SA T T T T T AII Hard Disk Setup Guide AII Hard Disk Setup Guide AII Hard Disk Setup Guide AII Hard Disk Setup Guide AII Hard Disk Setup Guide Before installing SA T AII hard disk to your computer , plea se carefully read below SA T AII hard disk setup guide. Some default setting of SA T AII hard [...]

43 43 43 43 43 2.12 eSA 2.12 eSA 2.12 eSA 2.12 eSA 2.12 eSA T T T T T AII Inter AII Inter AII Inter AII Inter AII Inter face Introduction face Introduction face Introduction face Introduction face Introduction What is eSA T AII? This motherboard supports eSA T AII interfa ce, the external SA T AII specification. eSA T AII allows you to enjoy the SA[...]

44 44 44 44 44 Connect one end of the eSA T AII device cable to eSA T AII device 2. Use the eSA T AII device cable to connect eSA T AII device and the eSA T AII port of the I/O shield. Connect the SA T A data Cable to the ora nge SA T AII connector (SA T AII_6) Connect the SA T A data ca ble to the eSA T AII connector (eSA T AII_TOP) 1. In order to[...]

45 45 45 45 45 Comparison between eSA T AII a nd other devices IEEE 1394 400Mb/s USB 2.0 480Mb/s SA T A 1.5Gb/s (1500Mb/s) eSA T AII/SA T AII 3.0Gb/s (3000Mb/s)[...]

46 46 46 46 46 2.14 Hot Plug and Hot Swap F 2.14 Hot Plug and Hot Swap F 2.14 Hot Plug and Hot Swap F 2.14 Hot Plug and Hot Swap F 2.14 Hot Plug and Hot Swap F unctions for SA unctions for SA unctions for SA unctions for SA unctions for SA T T T T T A / SA A / SA A / SA A / SA A / SA T T T T T AII AII AII AII AII HDDs HDDs HDDs HDDs HDDs This mothe[...]

47 47 47 47 47 Caution 1. Without SA T A 15-pin power conne ctor interface, the SA T A / SA T AII Hot Plug cannot be processed. 2. Even some SA T A / SA T AII HDDs provide both SA T A 15-pin power conne ctor a nd IDE 1x4-pin conventional power connector interfa ces, the IDE 1x4-pin conventional power connector interfa ce is definitely not able to s[...]

48 48 48 48 48 How to Hot Plug a SA T A / SA T AII HDD: Points of attention, before you process the Hot Plug: Plea se do follow below instruction sequence to process the Hot Plug, i mproper procedure will cause the SA T A / SA T AII HDD da mage a nd data loss. Connect SA T A data cable to the motherboard’s SA TAII conne ctor . Connect SA T A 15-p[...]

49 49 49 49 49 2.16 2.16 2.16 2.16 2.16 Driver Installation Guide Driver Installation Guide Driver Installation Guide Driver Installation Guide Driver Installation Guide T o install the drivers to your system, plea se insert the support CD to your optical drive first. Then, the drivers compatible to your syste m can be auto-dete cted and listed on [...]

50 50 50 50 50 NOTE. If you install Windows ® XP / Windows ® XP 64-bit on IDE HDDs a nd want to ma nage (create, convert, delete, or rebuild) RAID functions on SA T A / SA T AII HDDs, you still need to set up “SA T A Operation Mode” to [RAID] first. Then, plea se set the RAID configuration by using the Windows RAID installation guide in the f[...]

51 51 51 51 51 2.18 2.18 2.18 2.18 2.18 Installing Windows Installing Windows Installing Windows Installing Windows Installing Windows ® ® ® ® ® XP / XP 64-bit / Vista XP / XP 64-bit / Vista XP / XP 64-bit / Vista XP / XP 64-bit / Vista XP / XP 64-bit / Vista TM TM TM TM TM / / / / / Vista Vista Vista Vista Vista TM TM TM TM TM 64-bit W 64-bit[...]

52 52 52 52 52 2.18.2 Installing Windows 2.18.2 Installing Windows 2.18.2 Installing Windows 2.18.2 Installing Windows 2.18.2 Installing Windows ® ® ® ® ® Vista Vista Vista Vista Vista TM TM TM TM TM / Vista / Vista / Vista / Vista / Vista TM TM TM TM TM 64-bit Without 64-bit Without 64-bit Without 64-bit Without 64-bit Without RAID F RAID F R[...]

53 53 53 53 53 2.19 2.19 2.19 2.19 2.19 Untied Overclocking T Untied Overclocking T Untied Overclocking T Untied Overclocking T Untied Overclocking T echnology echnology echnology echnology echnology This motherboard supports U ntied Overclocking T echnology , which mean s during overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses.[...]

54 54 54 54 54 3. 3. 3. 3. 3. BIOS SETUP UTILITY BIOS SETUP UTILITY BIOS SETUP UTILITY BIOS SETUP UTILITY BIOS SETUP UTILITY 3.1 Introduction 3.1 Introduction 3.1 Introduction 3.1 Introduction 3.1 Introduction This section explains how to use the BIOS SETUP UTILITY to configure your system. The SPI Memory on the motherboard stores the BIOS SETUP UT[...]

55 55 55 55 55 BIOS SETUP UTILITY Main OC T weaker H/W Monitor Boot Security Exit Advanced Use [Enter], [TAB] or [SHIFT-T AB] to select a field. Use [+] or [-] to configure system Time. Select Screen Select Item +- Change Field T ab Select Field F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2005, American Meg[...]

56 56 56 56 56 3.3 3.3 3.3 3.3 3.3 OC T OC T OC T OC T OC T weak weak weak weak weak er Screen er Screen er Screen er Screen er Screen In the OC T weaker screen, you ca n set up overclocking features. BIOS SETUP UTILITY Main Advanced H/W Monitor Boot Security Exit Overclocking may cause damage to your CPU and motherboard. It should be done at your [...]

57 57 57 57 57 Proce ssor Maximum V oltage It will display Processor Maxi mum V oltage for reference. Multiplier/V oltage Cha nge This item is set to [Auto] by default. If it is set to [Manual], you may adjust the value of Processor Frequency and Proce ssor V oltage. However , it is recommended to keep the default value for system stability. BIOS S[...]

58 58 58 58 58 Memory Configuration Memory Clock This item ca n be set by the code using [Auto]. Y ou ca n set one of the sta ndard values a s listed: [400 MHz (DDR3 800)], [533 MHz (DD R3 1066)], [667 MHz (DDR3 1333)] and [800MHz (DDR3 1600)]. DRAM V oltage Use this to select DRAM voltage. Configuration options: [Auto], [1.48V] to [2.40V]. The def[...]

59 59 59 59 59 TRP Use this to adjust TRP values. Configuration options: [Auto], [5CLK] to [12CLK]. The default value is [Auto]. TRAS Use this to adjust TRAS values. Configuration options: [Auto], [15CLK] to [30CLK]. The default value is [Auto]. TRTP Use this to adjust TRTP values. Configuration options: [Auto], [4CLK] to [7CLK]. The default value [...]

60 60 60 60 60 MA Timing Use this to adjust values for MA timing. Configuration options: [Auto], [2T], [1T]. The default value is [Auto]. CHA Addr/Cmd Fine Delay Use this to adjust value s for CHA Addr/Cmd Fine Delay feature. Configura- tion options: [Auto], [No Delay], [1/64CLK] to [31/64CLK]. The default value is [Auto]. CHA Addr/Cmd Setup Time U[...]

61 61 61 61 61 CHA CLK Drive Strength Use this to adjust values f or CHA CLK Drive Strength. Configuration options : [Auto], [0.75x], [1.00x], [1.25x] and [1.50x]. The default value is [Auto]. CHA DA T A Drive Strength Use this to adjust values f or CHA DA T A Drive Strength. Configuration options: [Auto], [0.75x], [1.00x], [1.25x] and [1.50x]. The[...]

62 62 62 62 62 Chipset Settings SidePort Clock Speed This allows you to select sideport clock speed. The default value is [Auto]. Configuration options: [Auto], [400 MHz], [533 MHz], [667 MHz], [800 MHz], [1066 MHz] a nd [1333 MHz]. This option only a ppears when you set “Inter- nal Gra phics Mode” to [SIDEPORT] or [UMA+SIDEPOR T]. Onboard GPU [...]

63 63 63 63 63 3.4 3.4 3.4 3.4 3.4 Advanced Screen Advanced Screen Advanced Screen Advanced Screen Advanced Screen In this section, you may set the configurations for the following items: CPU Configuration, Chi pset Configuration, ACPI Configuration, Storage Conf iguration, PCIPnP Configuration, Floppy Configuration, SuperIO Configuration, and USB [...]

64 64 64 64 64 Boot Failure Guard Enable or disa ble the feature of Boot Failure Guard. Cool ‘n’ Quiet Use this item to en able or disable AMD’s Cool ‘n’ Quiet TM technology . The default value is [Auto]. Configuration options: [Auto], [Enabled] and [Disabled]. If you install Windows ® Vista TM and want to enable this function, plea se s[...]

65 65 65 65 65 BIOS SETUP UTILITY v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. Chipset Settings Onboard HD Audio Front Panel CD-In OnBoard Lan Graphics Adapter Share Memory Onboard HDMI HD Audio Primary [PCI] [Auto] [Auto] [Enabled] [Enabled] [Enabled] [Disabled] Select Screen Select Item + - Change Option F1 General Help F10 Save and [...]

66 66 66 66 66 Onboard HDMI HD Audio This allows you to ena ble or disable the onboard HDMI HD Audio in AMD 785G. Surround View This allows you to enable or disable the Surround View feature or Hybrid CrossFireX TM feature.[...]

67 67 67 67 67 BIOS SETUP UTILITY ACPI Settings Select auto-detect or disable the STR feature. Select Screen Select Item +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. Advanced Suspend To RAM A way Mode Support Restore on AC / Power Loss Ring-In Power On PCI Dev[...]

68 68 68 68 68 BIOS SETUP UTILITY Storage Configuration v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. Advanced Onboard SA T A Controller SA T A Operation Mode IDE1 Master IDE1 Slave SA T AII_1 SA T AII_2 SA T AII_3 SA T AII_4 SA T AII_5 SA T AII_6 [Enabled] [IDE] [Hard Disk] [Not Detected] [Not Detected] [Not Detected] [Not Detected] [N[...]

69 69 69 69 69 TYPE Use this item to configure the type of the IDE device that you specify. Configuration options: [Not Installed], [Auto], [CD/D V D], a nd [ARMD]. [Not Installed]: Select [Not Installed] to disable the use of IDE device. [Auto]: Select [Auto] to automatically detect the hard disk drive. After selecting the hard disk information in[...]

70 70 70 70 70 BIOS SETUP UTILITY Advanced PCI / PnP Settings V a l u ei nu n i t so fP C I clocks for PCI device latency timer regi ste r . Select Screen Select Item +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. PCI Latency Timer PCI IDE BusMaster [32] [Enable[...]

71 71 71 71 71 BIOS SETUP UTILITY Floppy Configuration Select the type of floppy drive connected to the system. Select Screen Select Item +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. Advanced Floppy A [1.44 MB 3 "] 1 2 BIOS SETUP UTILITY Configure Super I[...]

72 72 72 72 72 BIOS SETUP UTILITY USB Configuration T o enable or disable the onboard USB controllers. Select Screen Select Item +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. Advanced USB Controller USB 2.0 Support Legacy USB Support [Enabled] [Enabled] [Enable[...]

73 73 73 73 73 BIOS SETUP UTILITY Hardware Health Event Monitoring Select Screen Select Item F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. CPU Temperatur e M / B T emperature CPU Fan Speed Chassis Fan Speed Vcore + 3.30V + 5.00V + 12.00V Power Fan Speed : 3 7C/9 8F : 4722 RPM :[...]

74 74 74 74 74 BIOS SETUP UTILITY Main OC T weaker Advanced H/W Monitor Security Exit Boot Settings Configure Settings during System Boot. Select Screen Select Item Enter Go to Sub Screen F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. Boot Boot Settings Configuration 1st Boot De[...]

75 75 75 75 75 BIOS SETUP UTILITY Main OC T weaker Advanced H/W Monitor Boot Exit Install or Change the password. Select Screen Select Item Enter Change F1 General Help F10 Save and Exit ESC Exit F9 Load Defaults v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. Security Change Supervisor Password Change User Password Security Settings Supe[...]

76 76 76 76 76 BIOS SETUP UTILITY Main OC T weaker Advanced H/W Monitor Boot Security Exit system setup after saving the changes. F10 key can be used for this operation. Select Screen Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit F9 Load Defaults v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. Exit Save Cha[...]

77 77 77 77 77 4. 4. 4. 4. 4. Sof Sof Sof Sof Sof tware Suppor tware Suppor tware Suppor tware Suppor tware Suppor t t t t t 4.1 Install Operating System 4.1 Install Operating System 4.1 Install Operating System 4.1 Install Operating System 4.1 Install Operating System This motherboard supports various Microsoft ® Windows ® operating systems: XP [...]