Asus P5E инструкция обслуживания

Motherboard P5E[...]

ii E3392 First Edition V1 September 2007 Copyright © 2007 ASUST eK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the p[...]

iii Contents Notices ....................................................................................................... viii Safety information ...................................................................................... ix About this guide .......................................................................................... x P[...]

iv Contents 2.5.4 PCI slots ........................................................................ 2-21 2.5.5 PCI Express x1 slots ..................................................... 2-21 2.5.6 PCI Express 2.0 x16 slots ............................................. 2-21 2.6 Switch ................................................................[...]

v Contents 4.3.3 Legacy Diskette A .............................................................................. 4-12 4.3.4 Language ...................................................................... 4-12 4.3.5 SA T A 1-6 ....................................................................... 4-13 4.3.6 SA T A Conguration ..................[...]

vi Contents 4.8 T ools menu ................................................................................. 4-37 4.8.1 ASUS EZ Flash 2 .......................................................... 4-37 4.8.2 ASUS O.C. Prole ......................................................... 4-38 4.8.3 Ai Net 2 ..............................................[...]

vii Chapter 6: A TI ® CrossFire™ technology support 6.1 Overview ....................................................................................... 6-1 6.1.1 Requirements .................................................................. 6-1 6.1.2 Before you begin ............................................................. 6-1 6.2 Install[...]

viii Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has[...]

ix Safety information Electrical safety • T o prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all[...]

x About this guide This user guide contains the information you need when installing and conguring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports. • Chapter 2: Hardware information[...]

xi Conventions used in this guide T o make sure that you perform certain tasks properly , take note of the following symbols used throughout this manual. T ypography Bold text Indicates a menu or an item to select. Italics Used to emphasize a word or a phrase. <Key> Key s encl osed i n the less- than a nd gre ater-t han s ign mea ns tha t you[...]

xii P5E specications summary CPU LGA775 socket for Intel ® Core™2 Quad / Core™2 Extreme / Core™2 Duo / Pentium ® Extreme / Pentium ® D / Pentium ® 4 Processors Supports Intel ® next-generation 45nm multi-core CPUs Compatible with Intel ® 06/05B/05A processors * Refer to www .asus.com for Intel CPU support list Chipset Intel ® X38 / [...]

xiii P5E specications summary ASUS AI Lifestyle Unique features ASUS Power Saving Solution: - ASUS EPU (Energy Processing Unit) - ASUS AI Gear 3 (ASUS EPU Utility) - ASUS AI Nap ASUS Quiet Thermal Solution: - ASUS New Generation 8-Phase Power Design - ASUS Fanless Design: Heat-pipe solution - ASUS Fanless Design: StackCool 2 - ASUS Q-Fan 2 - ASU[...]

xiv Back Panel I/O Ports 1 x PS/2 Keyboard (purple) 1 x S/PDIF Out (Coaxial + Optical) 1 x IEEE1394a port 1 x LAN (RJ45) port 6 x USB 2.0 ports Internal I/O Connectors 3 x USB connectors support additional 6 USB ports 1 x Floppy disk drive connector 1 x IDE connector for two devices 6 x SA T A connectors 4 x Fan connectors (1 x CPU / 1 x Power / 2 [...]

1 Product introduction This chapter describes the motherboard features and the new technologies it supports.[...]

ASUS P5E Chapter summary 1 1.1 Welcome! ...................................................................................... 1-1 1.2 Package contents ......................................................................... 1-1 1.3 Special features ............................................................................ 1-2[...]

ASUS P5E 1-1 1.1 Welcome! Thank you for buying an ASUS ® P5E motherboard! The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards! Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below . I[...]

1-2 Chapter 1: Product Introduction 1.3 Special features 1.3.1 Product highlights Green ASUS This motherboard and its packaging comply with the European Union’s Restriction on the use of Hazardous Substances (RoHS). This is in line with the ASUS vision of creating environment-friendly and recyclable products/packaging to safeguard consumers’ he[...]

ASUS P5E 1-3 Native DDR2 1066 memory support T o attain top performance, ASUS engineers have successfully unleashed the true potential of DDR2 memory . While in DDR2 1066 mode, ASUS’s exclusive technology offers a choice of FSB 1333, providing great performance for 3D graphics and other memory demanding applications. See page 2-19 for details. Du[...]

1-4 Chapter 1: Product Introduction High Denition Audio Enjoy high-end sound quality on your PC! The onboard 8-channel HD audio (High Denition Audio, previously codenamed Azalia) CODEC enables high-quality 192KHz/24-bit audio output, jack-sensing feature, retasking functions, and multi- streaming technology that simultaneously sends different[...]

ASUS P5E 1-5 Q-Fan 2 ASUS Q-Fan 2 technology intelligently adjusts both CPU fan and chassis fan speeds according to system loading to ensure quiet, cool and efcient operation. See page 4-28 and 5-23 for details. Fanless Design - Pure Copper Heat-pipe The Heat Pipe design effectively directs the heat generated by the chipsets to the heatsink near[...]

1-6 Chapter 1: Product Introduction ASUS EZ DIY ASUS EZ DIY feature collection provides you easy ways to install computer components, update the BIOS or back up your favorite settings. ASUS AI Direct Link AI Direct Link can easily and efciently transfer large amounts of data via the network cable - saving up to 70% of the total time taken. With [...]

ASUS P5E 1-7 Smart Support DVD It provides a checklist to allow the user to see which drivers are already installed, as well as those that aren’t. When using ASUS PC Probe II, you can easily see the critical parts of the computer . ASUS MyLogo3™ This feature allows you to convert your favorite photo into a 256-color boot logo for a more colorfu[...]

1-8 Chapter 1: Product Introduction[...]

2 Hardware information This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers and connectors on the motherboard.[...]

ASUS P5E Chapter summary 2 2.1 Before you proceed ..................................................................... 2-1 2.2 Motherboard overview ................................................................. 2-2 2.3 Central Processing Unit (CPU) ................................................... 2-6 2.4 System memory .......................[...]

ASUS P5E 2-1 2.1 Before you proceed T ake note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, bef[...]

2-2 Chapter 2: Hardware information P5E ® 2.2 Motherboard overview Before you install the motherboard, study the conguration of your chassis to ensure that the motherboard ts into it. Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so can cause you physical injury and damage motherboard compone[...]

ASUS P5E 2-3 2.2.3 Motherboard layout PANEL P5E ® CHASSIS 24.5cm (9.6in) 30.5cm (12.0in) CPU_FAN DDR2 DIMM_A1 (64 bit,240-pin module) FLOPPY Super I/O CLRTC_SW Intel ® ICH9R EA TXPWR CR2032 3V Lithium Cell CMOS Power Intel ® X38 KB_USB56 USB34 JMB368 CHA_FAN1 SPDIF_OUT LGA775 IE1394_2 USB78 EATX12V PWR_FAN DDR2 DIMM_A2 (64 bit,240-pin module) DD[...]

2-4 Chapter 2: Hardware information 2.2.5 Layout contents Slots Page 1. DDR2 DIMM slots 2-14 2. PCI slots 2-21 3. PCI Express x 1 slots 2-21 4. PCI Express 2.0 x 16 slots 2-21 Onboard switch Page 1. Clear RTC RAM (Gaming Level Switch Design) 2-22 Rear panel connectors Page 1. PS/2 keyboard port (purple) 2-24 2. Coaxial S/PDIF Out port 2-24 3. LAN ([...]

ASUS P5E 2-5 Internal connectors Page 1. Floppy disk drive connector (34-1 pin FLOPPY) 2-26 2. IDE connector (40-1 pin PRI_EIDE) 2-27 3. ICH9R Serial A T A connectors (7-pin SA T A1~6) 2-28 4. USB connectors (10-1 pin USB78, USB910, USB1 1 12) 2-29 5. IEEE 1394a port connector (10-1 pin IE1394_2) 2-29 6. CPU, chassis, and optional fan connectors (4[...]

2-6 Chapter 2: Hardware information 2.3 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA775 socket designed for the Intel ® Core™2 Quad / Core™2 Extreme / Core™2 Duo / Pentium ® D / Pentium ® 4 / Pentium ® Extreme processors. • Upon purchase of the motherboard, make sure that the PnP cap is on the socket and [...]

ASUS P5E 2-7 3. Lift the load lever in the direction of the arrow to a 135º angle. 2. Press the load lever with your thumb (A), then move it to the left (B) until it is released from the retention tab. Retention tab Load lever This side of the socket box should face you. PnP cap A B T o prevent damage to the socket pins, do not remove the PnP cap [...]

2-8 Chapter 2: Hardware information 5. Position the CPU over the socket, making sure that the gold triangle is on the bottom-left corner of the socket then t the socket alignment key into the CPU notch. Alignment key Gold triangle mark 6. Close the load plate (A), then push the load lever (B) until it snaps into the retention tab. 7. If installi[...]

ASUS P5E 2-9 Fastener Motherboard hole 2.3.2 Installing the CPU heatsink and fan The Intel ® LGA775 processor requires a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance. T o install the CPU heatsink and fan: 1. Place the heatsink on top of the installed CPU, making sure that the four fasteners match[...]

2-10 Chapter 2: Hardware information 3. Connect the CPU fan cable to the connector on the motherboard labeled CPU_F AN. 2. Push down two fasteners at a time in a diagonal sequence to secure the heatsink and fan assembly in place. B A A A B B DO NOT forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug thi[...]

ASUS P5E 2-1 1 2.3.3 Uninstalling the CPU heatsink and fan 3. Pull up two fasteners at a time in a diagonal sequence to disengage the heatsink and fan assembl y from the motherboard. B B A A A A B B 4. Carefully remove the heatsink and fan assembly from the motherboard. T o uninstall the CPU heatsink and fan: 1. Disconnect the CPU fan cable from th[...]

2-12 Chapter 2: Hardware information 5. Rotate each fastener clockwise to ensure correct orientation when reinstalling. Narrow end of the groove Refer to the documentation in the boxed or stand-alone CPU fan package for detailed information on CPU fan installation. The narrow end of the groove should point outward after resetting. (The photo shows [...]

ASUS P5E 2-13 2.3.4 Installing the optional fans Install the optional fan only if you are using a passive cooler or a water cooler . Installing the optional fan with an active CPU cooler will interfere with the airow and destabilize the system. 1. Position the fan above the pipe and heatsink assembly . 2. Fit the fan to the grooved edge of the h[...]

2-14 Chapter 2: Hardware information Channel Sockets Channel A DIMM_A1 and DIMM_A2 Channel B DIMM_B1 and DIMM_B2 2.4 System memory 2.4.1 Overview The motherboard comes with four Double Data Rate 2 (DDR2) Dual Inline Memory Modules (DIMM) sockets. The gure illustrates the location of the DDR2 DIMM sockets: • *If you install a DDR2-1066 memory m[...]

ASUS P5E 2-15 2.4.2 Memory congurations Y ou may install 256 MB, 512 MB, 1 GB, and 2 GB unbuffered ECC and non-ECC DDR2 DIMMs into the DIMM sockets. Recommended Memory Congurations • Y ou may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel conguration[...]

2-16 Chapter 2: Hardware information P5E Motherboard Qualied V endors Lists (QVL) DDR2-800 MHz capability Size V endor Chip No. CL Chip Brand SS/ DS Part No. DIMM socket support (Optional) A* B* C* 512MB KINGSTON K4T51083QC 5 SEC SS KVR800D2N5/512 * * * 1024MB KINGSTON Heat-Sink Package 4-4-4-12 N/A DS KHX6400D2LL/1G * * 1024MB KINGSTON V59C1512[...]

ASUS P5E 2-17 Visit the ASUS website for the latest DDR2 QVL. P5E Motherboard Qualied V endors Lists (QVL) DDR2-667MHz capability SS - Single-sided DS - Double-sided DIMM support: A - Supports one module inserted into either slot, in Single-channel memory conguration. B - Supports one pair of modules inserted into either Channel A or Channel [...]

2-18 Chapter 2: Hardware information 2.4.3 Installing a DIMM Unplug the power supply before adding or removing DIMMs or other system components. Failure to do so can cause severe damage to both the motherboard and the components. T o install a DIMM: 1. Unlo ck a DIM M so cket by pres sing the retaining clips outward. 2. Align a DIMM on the socket s[...]

ASUS P5E 2-19 2.5 Expansion slots In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support. 2.5.1 Installing an expansion card T o install an expansion card: 1. Before installing the expansion card, read the documentation that came with it and make the necessary [...]

2-20 Chapter 2: Hardware information 2.5.3 Interrupt assignments IRQ assignments for this motherboard A B C D E F G H PCI slot 1 shared ––––––– PCI slot 2 – shared –––––– LAN (8001) – – shared ––––– SA T A (368) shared ––––––– PCIe x16_1 shared ––––––– PCIe x16_2 shared –––[...]

ASUS P5E 2-21 2.5.4 PCI slots The PCI slots support cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI specications. Refer to the gure below for the location of the slots. 2.5.5 PCI Express x1 slots This motherboard supports PCI Express x1 network cards, SCSI cards and other cards that comply with the PCI Expr[...]

2-22 Chapter 2: Hardware information 2.6 Switch 1. Clear RTC RAM (Gaming Level Switch Design) This switch allows you to clear the Real T ime Clock (RTC) RAM in CMOS. Y ou can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include s[...]

ASUS P5E 2-23 2.7 Audio card installation 2.7.1 Audio card Installation 1. T ake out the Audio card from the package. 2. Locate the audio slot on the motherboard. 3. Align the card connector with the slot and press rmly until the card sits on the slot completely . 4. The photo below shows the audio card installed on the motherboard.[...]

2-24 Chapter 2: Hardware information 2.8 Connectors 2.8.1 Rear panel connectors 1. PS/2 keyboard port (purple). This port is for a PS/2 keyboard. 2. Coaxial S/PDIF Out port. This port connects an external audio output device via a coaxial S/PDIF cable. 3. LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN) through a [...]

ASUS P5E 2-25 4. Line In port (light blue). This port connects the tape, CD, DVD player , or other audio sources. 5. Line Out port (lime). This port connects a headphone or a speaker . In 4-channel, 6-channel, and 8-channel conguration, the function of this port becomes Front Speaker Out. 6. Microphone port (pink). This port connects a microphon[...]

2-26 Chapter 2: Hardware information 2.8.2 Internal connectors 1. Floppy disk drive connector (34-1 pin FLOPPY) This connector is for the provided oppy disk drive (FDD) signal cable. Insert one end of the cable to this connector , then connect the other end to the signal connector at the back of the oppy disk drive. Pin 5 on the connector is [...]

ASUS P5E 2-27 P5E ® P5E IDE connector NOTE: Orient the red markings (usually zigzag) on the IDE cable to PIN 1. PRI_EIDE 2. IDE connector (40-1 pin PRI_EIDE) The onboard IDE connector is for the Ultra DMA 133/100 signal cable. There are three connectors on each Ultra DMA 133/100 signal cable: blue, black, and gray . Connect the blue connector to t[...]

2-28 Chapter 2: Hardware information 3. ICH9R Serial A T A connectors (7-pin SA T A1~6) These connectors are for the Serial A T A signal cables for Serial A T A hard disk drives. If you installed Serial A T A hard disk drives, you can create a RAID 0, RAID 1, RAID 5, RAID 10 conguration with the Intel ® Matrix Storage T echnology through the on[...]

ASUS P5E 2-29 4. USB connectors (10-1 pin USB 78, USB 910, USB 1 1 12) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specication that supports up to 480 Mbps connection speed. Ne[...]

2-30 Chapter 2: Hardware information 6. CPU, chassis, and optional fan connectors (4-pin CPU_F AN, 3-pin CHA_F AN1~2, 3-pin PWR_F AN) The fan c onnect ors su pport cooli ng fan s of 3 50 mA~1000 mA (24 W max.) or a total of 1 A~3.48 A (41.76 W max.) at +12V . Connect the fan cables to the fan connectors on the motherboard, making sure that the blac[...]

ASUS P5E 2-31 7. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector . The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or rep[...]

2-32 Chapter 2: Hardware information 9. AT X p owe r c on ne cto rs (24-pin EA TXPWR, 8-pin EA TX12V) These connectors are for A TX power supply plugs. The power supply plugs are designed to t these connectors in only one orientation. Find the proper orientation and push down rmly until the connectors completely t. • Make sure to remove [...]

ASUS P5E 2-33 • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector . The system power LED lights up when you turn on the system power , and blinks when the system is in sleep mode. • Hard disk drive activity LED (2-pin IDE_LED) This 2-pin connector is for the HDD[...]

2-34 Chapter 2: Hardware information ASUS Q-Connector (system panel) Y ou can use the ASUS Q-Connector to connect/disconnect chassis front panel cables in a few steps. Refer to the instructions below to install the ASUS Q- Connector . 1. Connect the front panel cables to the ASUS Q-Connector . Refer to the labels on the Q-Connector to know the deta[...]

3 Powering up This chapter describes the power up sequence, the vocal POST messages, and ways of shutting down the system.[...]

ASUS P5E Chapter summary 3 3.1 Starting up for the rst time ........................................................ 3-1 3.2 T urning off the computer ............................................................. 3-2[...]

ASUS P5E 3-1 3.1 Starting up for the rst time 1. After making all the connections, replace the system case cover . 2. Be sure that all switches are off. 3. Connect the power cord to the power connector at the back of the system chassis. 4. Connect the power cord to a power outlet that is equipped with a surge protector . 5. T urn on the devices [...]

3-2 Chapter 3: Powering up 3.2 Turning off the computer 3.2.1 Using the OS shut down function If you are using Windows ® XP: 1. Click the Start button then select T urn Off Computer . 2. Click the T urn Off button to shut down the computer . 3. The power supply should turn off after Windows ® shuts down. If you are using Windows ® Vista™: 1. C[...]

4 BIOS setup This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.[...]

Chapter summary 4 ASUS P5E 4.1 Managing and updating your BIOS ............................................ 4-1 4.2 BIOS setup program .................................................................... 4-9 4.3 Main menu .................................................................................. 4-12 4.4 Ai T weaker ........................[...]

ASUS P5E 4-1 4.1 Managing and updating your BIOS The following utilities allow you to manage and update the motherboard Basic Input/Output System (BIOS) setup. 1. ASUS Update (Updates the BIOS in Windows ® environment.) 2. ASUS EZ Flash 2 (Updates the BIOS using a oppy disk or USB ash disk.) 3. ASUS AFUDOS (Updates the BIOS using a bootable [...]

4-2 Chapter 4: BIOS setup Quit all Windows ® applications before you update the BIOS using this utility . 3. Select the ASUS FTP site nearest you to avoid network trafc, or click Auto Select . Click Next . Updating the BIOS through the Internet T o update the BIOS through the Internet: 1. Launch the ASUS Update utility from the Windows ® deskt[...]

ASUS P5E 4-3 Updating the BIOS through a BIOS le T o update the BIOS through a BIOS le: 1. Launch the ASUS Update utility from the Windows ® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate . The ASUS Update main window appears. 2. Select Update BIOS from a le option from the drop-down menu, then click Nex[...]

4-4 Chapter 4: BIOS setup 4.1.2 Creating a bootable oppy disk 1. Do either one of the following to create a bootable oppy disk. DOS environment a. Insert a 1.44MB oppy disk into the drive. b. At the DOS prompt, type format A: / S then press <Enter>. Windows ® XP environment a. Insert a 1.44 MB oppy disk to the oppy disk drive.[...]

ASUS P5E 4-5 T o update the BIOS using EZ Flash 2: 1. Visit the ASUS website (www .asus.com) to download the latest BIOS le for the motherboard. 2. Save the BIOS le to a oppy disk or a USB ash disk, then restart the system. 4.1.3 ASUS EZ Flash 2 utility The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go throu[...]

4-6 Chapter 4: BIOS setup 4.1.4 AFUDOS utility The AFUDOS utility allows you to update the BIOS le in DOS environment using a bootable oppy disk with the updated BIOS le. This utility also allows you to copy the current BIOS le that you can use as backup when the BIOS fails or gets corrupted during the updating process. Copying the curr[...]

ASUS P5E 4-7 2. Copy the AFUDOS utility (afudos.exe) from the motherboard support DVD to the bootable oppy disk you created earlier . 3. Boot the system in DOS mode, then at the prompt type: afudos /i[lename] where [lename] is the latest or the original BIOS le on the bootable oppy disk. A:>afudos /iP5E.ROM Write the BIOS lena[...]

4-8 Chapter 4: BIOS setup 4.1.5 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS le when it fails or gets corrupted during the updating process. Y ou can update a corrupted BIOS le using the motherboard support DVD or the USB ash disk that contains the updated BIOS le. [...]

ASUS P5E 4-9 4.2 BIOS setup program This motherboard supports a programmable Serial Peripheral Interface (SPI) chip that you can update using the provided utility described in section 4.1 Managing and updating your BIOS . Use the BIOS Setup program when you are installing a motherboard, reconguring your system, or prompted to “Run Setup.” Th[...]

4-10 Chapter 4: BIOS setup Select Screen Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2007, American Megatrends, Inc. BIOS SETUP UTILITY Main Ai Tweaker Advanced Power Boot Tools Exit System Time [10:55:25] System Date [Mon 07/23/2007] Legacy Diskette A [1.44M, 3.5 in.] Language [E[...]

ASUS P5E 4-1 1 4.2.4 Menu items The highlighted item on the menu bar displays the specic items for that menu. For example, selecting Main shows the Main menu items. The other items (Advanced, Power , Boot, and Exit) on the menu bar have their respective menu items. 4.2.5 Sub-menu items A solid triangle before each item on any menu screen means t[...]

4-12 Chapter 4: BIOS setup 4.3 Main menu When you enter the BIOS Setup program, the Main menu screen appears, giving you an overview of the basic system information. 4.3.1 System Time [xx:xx:xx] Allows you to set the system time. 4.3.2 System Date [Day xx/xx/xxxx] Allows you to set the system date. 4.3.3 Legacy Diskette A [1.44M, 3.5 in.] Sets the [...]

ASUS P5E 4-13 4.3.5 SA T A 1-6 While entering Setup, the BIOS automatically detects the presence of Serial A T A devices. There is a separate sub-menu for each SA T A device. Select a device item then press <Enter> to display the SA T A device information. Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v[...]

4-14 Chapter 4: BIOS setup DMA Mode [Auto] Selects the DMA mode. Conguration options: [Auto] [SWDMA0] [SWDMA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5] SMART Monitoring [Auto] Sets the Smart Monitoring, Analysis, and Reporting T echnology . Conguration options: [Auto] [Disabled] [Enabled] 32Bit Data [...]

ASUS P5E 4-15 Hard Disk Write Protect [Disabled] Disables or enables device write protection. This will be ef fective only if the device is accessed through BIOS. Conguration option: [Disabled] [Enabled] SA T A Detect Time Out (Sec) [35] Selects the time out value for detecting A T A/A T API devices. Conguration options: [0] [5] [10] [15] [20[...]

4-16 Chapter 4: BIOS setup 4.3.8 System Information This menu gives you an overview of the general system specications. The BIOS automatically detects the items in this menu. ASUS BIOS Displays the auto-detected BIOS information. Processor Displays the auto-detected CPU specication. System Memory Displays the auto-detected system memory . Sel[...]

ASUS P5E 4-17 4.4 Ai Tweaker menu The Ai T weaker menu items allow you to congure overclocking-related items. T ake caution when changing the settings of the Ai T weaker menu items. Incorrect eld values can cause the system to malfunction. Select Screen Select Item Enter Go to Sub Screen +- Change Option F1 General Help F10 Save and Exit ESC [...]

4-18 Chapter 4: BIOS setup FSB Frequency [XXX] Displays the frequency sent by the clock generator to the system bus and PCI bus. The value of this item is auto-detected by the BIOS. Use the <+> and <-> keys to adjust the FSB frequency . Y ou can also type the desired CPU frequency using the numeric keypad. The values range from 200 to 8[...]

ASUS P5E 4-19 CAS# Latency [5 DRAM Clocks] Conguration options: [3 DRAM Clocks] [4 DRAM Clocks] [5 DRAM Clocks] [6 DRAM Clocks].....[17 DRAM Clocks] [18 DRAM Clocks] RAS# to CAS# Delay [5 DRAM Clocks] Conguration options: [3 DRAM Clocks] [4 DRAM Clocks] [5 DRAM Clocks] [6 DRAM Clocks].....[17 DRAM Clocks] [18 DRAM Clocks] RAS# Precharge [5 DR[...]

4-20 Chapter 4: BIOS setup Read to Precharge T ime [Auto] Conguration options: [Auto] [1 DRAM Clocks]~[15 DRAM Clocks] 4.4.6 DRAM Command Rate [Auto] Conguration options: [Auto] [1T] [2T] 4.4.7 DRAM Static Read Control [Auto] Conguration options: [Auto] [Disabled] [Enabled] 4.4.8 T ransaction Booster [Auto] Conguration options: [Auto] [[...]

ASUS P5E 4-21 DRAM V oltage [Auto] Allows you to set the DRAM voltage. The values range from 1.80V to 2.66V with a 0.02V interval. North Bridge V oltage [Auto] Allows you to set the North Bridge voltage. The values range from 1.25V to 1.75V with a 0.02V interval. • Setting the CPU PLL Voltage, FSB T ermination V oltage, DRAM V oltage and North Br[...]

4-22 Chapter 4: BIOS setup North Bridge V oltage Reference [Auto] Conguration options: [Auto] [0.67x] [0.63x] [0.60x] [0.57x] [0.56x] [0.53x] [0.51x] [0.49x] SB 1.5V V oltage [Auto] Conguration options: [Auto] [1.50V] [1.55V] [1.60V] [1.65V] [1.70V] [1.75V] [1.80V] VCC EXT PLL OV [Auto] Conguration options: [Auto] [Disabled] [Enabled] 4.4.[...]

ASUS P5E 4-23 4.5 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. T ake caution when changing the settings of the Advanced menu items. Incorrect eld values can cause the system to malfunction. Select Screen Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit v[...]

4-24 Chapter 4: BIOS setup Ratio CMOS Setting: [9] Allows you to set the ratio between the CPU Core Clock and the FSB Frequency . Use <+> and <-> to adjust the value. Conguration options: [ 6] [ 7] [ 8] [ 9] The options vary depending on the CPU you install. C1E Support [Enabled] Allows you to enable or disable C1E Support. Congur[...]

ASUS P5E 4-25 BIOS SETUP UTILITY Advanced 4.5.2 Chipset The Chipset menu allows you to change the advanced chipset settings. Select an item then press <Enter> to display the sub-menu. Advanced Chipset Settings WARMING: Setting wrong values in below sections may cause system to malfunction. North Bridge Conguration Congure North Bridge f[...]

4-26 Chapter 4: BIOS setup 4.5.3 Onboard Device Conguration Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2007, American Megatrends, Inc. BIOS SETUP UTILITY Advanced Onboard Device Conguration High Denition Audio [Enabled] Front Panel Type [HD Audio] J-Micron PATA Controller [...]

ASUS P5E 4-27 4.5.4 USB Conguration The items in this menu allows you to change the USB-related features. Select an item then press <Enter> to display the conguration options. The USB Devices Enabled item shows the auto-detected values. If no USB device is detected, the item shows None . USB Functions [Enabled] Allows you to enable or d[...]

4-28 Chapter 4: BIOS setup 4.5.5 PCIPnP The PCIPnP menu items allow you to change the advanced settings for PCI/PnP devices. T ake caution when changing the settings of the PCIPnP menu items. Incorrect eld values can cause the system to malfunction. Plug And Play O/S [NO] When set to [NO], BIOS congures all the devices in the system. When set[...]

ASUS P5E 4-29 4.6 Power menu The Power menu items allow you to change the settings for the Advanced Power Management (APM). Select an item then press <Enter> to display the conguration options. 4.6.1 Suspend Mode [Auto] Allows you to select the Advanced Conguration and Power Interface (ACPI) state to be used for system suspend. Congu[...]

4-30 Chapter 4: BIOS setup 4.6.5 APM Conguration Restore On AC Power Loss [Power Off] When set to [Power Off], the system goes into of f state after an AC power loss. When set to [Power On], the system goes on after an AC power loss. When set to [Last State], the system goes into either off or on state, whatever the system state was before the A[...]

ASUS P5E 4-31 4.6.6 Hardware Monitor Select Screen Select Item +- Change Field F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2007, American Megatrends, Inc. BIOS SETUP UTILITY Power Hardware Monitor CPU Temperature [47ºC/116.5ºF] MB Temperature [32ºC/89.5ºF] CPU Fan Speed [4500RPM] CPU Q-Fan Control [Disabled] Chassis Q-Fa[...]

4-32 Chapter 4: BIOS setup Chassis Q-Fan Controls [Disabled] Allows you to enable or disable the Chassis Q-fan. Conguration options: [Disabled] [Enabled] The following items appear only when you enable Chassis Q-Fan Control. Chassis Fan Ratio [Auto] Allows you to select a fan speed ratio in the low CPU temperature. Conguration options [Auto] [...]

ASUS P5E 4-33 4.7 Boot menu The Boot menu items allow you to change the system boot options. Select an item then press <Enter> to display the sub-menu. Select Screen Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2007, American Megatrends, Inc. BIOS SETUP UTILITY Main Ai Tweaker Advanced[...]

4-34 Chapter 4: BIOS setup 4.7.2 Boot Settings Conguration Quick Boot [Enabled] Enabling this item allows the BIOS to skip some power on self tests (POST) while booting to decrease the time needed to boot the system. When set to [Disabled], BIOS performs all the POST items. Conguration options: [Disabled] [Enabled] Full Screen Logo [Enabled] [...]

ASUS P5E 4-35 4.7.3 Security The Security menu items allow you to change the system security settings. Select an item then press <Enter> to display the conguration options. Change Supervisor Password Select this item to set or change the supervisor password. The Supervisor Password item on top of the screen shows the default Not Installed [...]

4-36 Chapter 4: BIOS setup User Access Level [Full Access] This item allows you to select the access restriction to the Setup items. Conguration options: [No Access] [View Only] [Limited] [Full Access] [No Access] prevents user access to the Setup utility . [View Only] allows access but does not allow change to any eld. [Limited] allows chang[...]

ASUS P5E 4-37 4.8 Tools menu The T ools menu items allow you to congure options for special functions. Select an item then press <Enter> to display the sub-menu. Select Screen Select Item +- Change Field Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2007, American Megatrends, Inc. BIOS SETUP UTI[...]

4-38 Chapter 4: BIOS setup Select Screen Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2007, American Megatrends, Inc. BIOS SETUP UTILITY Tools O.C. PROFILE Conguration O.C. Prole 1 Status : Not Installed O.C. Prole 2 Status : Not Installed Save to Prole 1 Load from Prole 1 Sav[...]

ASUS P5E 4-39 ASUSTek O.C. Prole Utility V1.06 4.8.3 Ai Net 2 Marvell POST Check LAN Cable [Disabled] Enables or disables checking of the Marvell LAN cable during the Power-On Self-T est (POST). Conguration options: [Disabled] [Enabled] v02.61 (C)Copyright 1985-2007, American Megatrends, Inc. Pair Status Length 1-2 N/A Marvell Controller 0 3-[...]

4-40 Chapter 4: BIOS setup 4.9 Exit menu Pressing <Esc> does not immediately exit this menu. Select one of the options from this menu or <F10> from the legend bar to exit. The Exit menu items allow you to load the optimal or failsafe default values for the BIOS items, and save or discard your changes to the BIOS items. Select Screen Sel[...]

5 Software support This chapter describes the contents of the support DVD that comes with the motherboard package.[...]

ASUS P5E Chapter summary 5 5.1 Installing an operating system ................................................... 5-1 5.2 Support DVD information ............................................................ 5-1 5.3 Software information ................................................................... 5-9 5.4 RAID congurations .................[...]

ASUS P5E 5-1 If Autorun is NOT enabled in your computer , browse the contents of the support DVD to locate the le ASSETUP .EXE from the BIN folder . Double-click the ASSETUP .EXE to run the DVD. 5.1 Installing an operating system This motherboard supports Windows ® XP/64-bit XP/Vista/64-bit V ista operating systems (OS). Always install the late[...]

5-2 Chapter 5: Software support 5.2.2 Drivers menu The drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices. ASUS InstAll - Installation Wizard for Drivers Launches the ASUS InstAll driver installation wizard. Intel Chipset Inf Update Program Installs the Inte[...]

ASUS P5E 5-3 5.2.3 Utilities menu The Utilities menu shows the applications and other software that the motherboard supports. ASUS InstAll-Installation Wizard for Utilities Installs all of the utilities through the Installation Wizard. Marvell Y ukon VCT Application Installs the Marvell ® Y ukon Virtual Cable T ester™ (VCT) application that diag[...]

5-4 Chapter 5: Software support Y ou can also install the following utilities from the ASUS Superb Software Library DVD. Anti-Virus Utility The anti-virus application detects and protects your computer from viruses that destroys data. Y ou can also download the utility by clicking the Security tab. Anti-Virus Utility Download Allows you to choose t[...]

ASUS P5E 5-5 5.2.4 Make Disk menu The Make Disk menu contains items to create the Intel ICH9R or JMicron ® JMB368 RAID/AHCI driver disk. Intel ICH9 32/64 bit RAID/AHCI Driver Allows you to create an ICH9R 32/64bit RAID/AHCI driver disk.[...]

5-6 Chapter 5: Software support 5.2.5 Manuals menu The Manuals menu contains a list of supplementary user manuals. Click an item to open the folder of the user manual. Most user manual les are in Portable Document Format (PDF). Install the Adobe ® Acrobat ® Reader from the Utilities menu before opening a user manual le. 5.2.6 ASUS Contact i[...]

ASUS P5E 5-7 5.2.7 Other information The icons on the top right corner of the screen give additional information on the motherboard and the contents of the support DVD. Click an icon to display the specied information. Motherboard Info Displays the general specications of the motherboard. Browse this DVD Displays the support DVD contents in g[...]

5-8 Chapter 5: Software support Filelist Displays the contents of the support DVD and a brief description of each in text format. T echnical support form Displays the ASUS T echnical Support Request Form that you have to ll out when requesting technical support.[...]

ASUS P5E 5-9 5.3 Software information Most of the applications in the support DVD have wizards that will conveniently guide you through the installation. View the online help or readme le that came with the software application for more information. 5.3.1 ASUS MyLogo3 ™ The ASUS MyLogo3 ™ utility lets you customize the boot logo. The boot lo[...]

5-10 Chapter 5: Software support 9. When the screen returns to the ASUS Update utility , ash the original BIOS to load the new boot logo. 10. After ashing the BIOS, restart the computer to display the new boot logo during POST . 8. Adjust the boot image to your desired size by selecting a value on the Ratio box. 7. When the logo images appear[...]

ASUS P5E 5-1 1 3. Click the Run button to perform a cable test. 5.3.2 AI NET 2 The AI NET 2 features the Marvell ® V irtual Cable T ester™ (VCT). VCT is a cable diagnostic utility that reports LAN cable faults and shorts using the T ime Domain Reectometry (TDR) technology . The VCT detects and reports open and shorted cables, impedance mismat[...]

5-12 Chapter 5: Software support 5.3.3 AI Audio 2 (SoundMAX ® High Denition Audio utility) The ADI AD1988B High Denition Audio CODEC provides 8-channel audio capability through the SoundMAX ® audio utility with AudioESP™ software to deliver the ultimate audio experience on your PC. The software implements high quality audio synthesis/rend[...]

ASUS P5E 5-13 A. SoundMAX BlackHawk (AI Audio 2) If you are using Windows Vista™ operating system, from the taskbar , double-click on the SoundMAX ® BlackHawk icon to display the SoundMAX ® control panel. Enabling AI Audio 2 Click the power button to activate digital signal processing. AI Audio 2, with the new SoundMAX ® BlackHawk by Sonic Foc[...]

5-14 Chapter 5: Software support Playback Settings T o congure the playback settings, click the Playback button on the control panel. Y ou can adjust the volume of the Speakers and SPDIF Interface or mute the audio. Preset settings Click and expand the drop-down menu to select your preferred Digital Signal Processing (DSP) preset. Move the slide[...]

ASUS P5E 5-15 More Settings Click for the further congurations. Equalizer Allows you to congure and customize all the DSP presets frequencies. Recording Settings T o change the recording settings, click the Recording button on the control panel. Y ou can adjust the speaker delay of Microphone or Line In by moving the slider rightward or leftw[...]

5-16 Chapter 5: Software support Speakers Allows you to adjust the Speaker T rim and Speaker Delay . Bass Allows you to do the Bass management. Preferences Displays the preference options for this utility , version information, AudioESP , etc.[...]

ASUS P5E 5-17 B. SoundMAX If you are using Windows XP operating system, from the taskbar , double-click on the SoundMAX ® icon to display the SoundMAX ® Control Panel. Audio Setup Wizard By clicking the icon from the SoundMAX ® control panel, you can easily congure your audio settings. Simply follow the succeeding screen instructions and begi[...]

5-18 Chapter 5: Software support Jack configuration This screen helps you congure your computer’s audio ports, depending on the audio devices you have installed. Adjust speaker volume This screen helps you adjust speaker volume. Click the T est button to hear the changes you have made. Adjust microphone volume This screen helps you adjust micr[...]

ASUS P5E 5-19 Audio preferences Click the icon to go to the Preferences page. This page allows you to change various audio settings. General options Click the General tab to choose your playback and recording devices, enable/ disable the AudioESP™ feature, and enable/disable digital output. Listening Environment options Click the Listening Enviro[...]

5-20 Chapter 5: Software support Microphone options Click the Microphone tab allows you to optimize your microphone input settings.[...]

ASUS P5E 5-21 5.3.4 ASUS PC Probe II PC Probe II is a utility that monitors the computer’s vital components, and detects and alerts you of any problem with these components. PC Probe II senses fan rotations, CPU temperature, and system voltages, among others. Because PC Probe II is software-based, you can start monitoring your computer the moment[...]

5-22 Chapter 5: Software support Button Function Opens the Conguration window Opens the Report window Opens the Desktop Management Interface window Opens the Peripheral Component Interconnect window Opens the Windows Management Instrumentation window Opens the hard disk drive, memory , CPU usage window Shows/Hides the Preference section Minimize[...]

ASUS P5E 5-23 Changing the monitor panels position T o change the position of the monitor panels in the desktop, click the arrow down button of the Scheme options, then select another position from the list box. Click OK when nished. Moving the monitor panels All monitor panels move together using a magnetic effect. If you want to detach a monit[...]

5-24 Chapter 5: Software support Monitoring sensor alert The monitor panel turns red when a component value exceeds or is lower than the threshold value. Refer to the illustrations below . Large display Small display WMI browser Click to display the WMI (Windows Management Instrumentation) browser . This browser displays various Windows® managemen[...]

ASUS P5E 5-25 PCI browser Click to display the PCI (Peripheral Component Interconnect) browser . This browser provides information on the PCI devices installed on your system. Click the plus sign (+) before the PCI Information item to display available information. Usage The Usage browser displays real-time information on the CPU, hard disk drive s[...]

5-26 Chapter 5: Software support Memory usage The Memory tab shows both used and available physical memory . The pie chart at the bottom of the window represents the used (blue) and the available Conguring PC Probe II Click to view and adjust the sensor threshold values. The Cong window has two tabs: Sensor/Threshold and Preference. The Senso[...]

ASUS P5E 5-27 5.3.5 ASUS AI Suite ASUS AI Suite allows you to launch AI Gear 2, AI N.O.S., AI Booster , AI Nap, and Q-Fan 2 utilities easily . Install the ASUS EPU + AI Gear 3 Driver before the ASUS AI Suite utility . Otherwise, the ASUS AI Suite will not function properly . Installing AI Suite T o install AI Suite on your computer: 1. Place the su[...]

5-28 Chapter 5: Software support Other feature buttons Click on right corner of the main window to open the monitor window . Click on right corner of the expanded window to switch the temperature from degrees Centigrade to degrees Fahrenheit. Displays the CPU/ system temperature, CPU/memory/PCIE voltage, and CPU/ chassis fan speed Displays the FSB/[...]

ASUS P5E 5-29 Auto Mode Calibration T urbo Mode High Performance Mode Medium Power Saving Mode Max Power Saving Mode Settings 5.3.6 ASUS AI Gear 3 (ASUS EPU Utility) ASUS AI Gear 3 is a utility designed to congure and support all ASUS EPU (Energy Processing Unit) features. This easy-to-use utility provides four system performance proles that [...]

5-30 Chapter 5: Software support 5.3.7 ASUS AI Nap This feature allows you to minimize the power consumption of your computer whenever you are away . Enable this feature for minimum power consumption and a quieter system operation. After installing AI Suite from the bundled Support DVD, you can launch the utility by double-clicking the AI Suite ico[...]

ASUS P5E 5-31 5.3.8 ASUS Q-Fan 2 This ASUS Q-Fan 2 Control feature allows you to set the appropriate performance level of the CPU Q-Fan 2 or the Chassis Q-Fan 2 for more efcient system operation. After enabling the Q-Fan 2 function, the fans can be set to automatically adjust depending on the temperature, to decrease fan speed, or to achieve the[...]

5-32 Chapter 5: Software support 5.3.9 ASUS AI Booster The ASUS AI Booster application allows you to overclock the CPU speed in WIndows ® environment without the hassle of booting the BIOS. After installing AI Suite from the bundled Support DVD, you can launch the utility by double-clicking the AI Suite icon on the Windows ® OS taskbar and click [...]

ASUS P5E 5-33 5.3.10 ASUS AI Direct Link ASUS AI Direct Link allows you to form a computer-to-computer network via a network cable to share les with high transfer rate. Y ou must rst connect two computers (at least one of them is ASUS product) using a network cable, and then install the utility to both computers to avail the AI Direct Link fe[...]

5-34 Chapter 5: Software support The default path of the AIDirectLinkIncoming folder is C:Program FilesASUSAI Direct Link. T o change its location, disable the incoming folder rst. Then, select Incoming folder > Change incoming folder to open the system directories, and move the AIDirectLinkIncoming folder under another directory . T o con[...]

P5E 5-35 5.4 RAID congurations The motherboard comes with the Intel ® ICH9R Southbridge RAID controller that allows you to congure IDE and Serial A T A hard disk drives as RAID sets. 5.4.1 RAID denitions RAID 0 (Data striping) optimizes two identical hard disk drives to read and write data in parallel, interleaved stacks. T wo hard disks [...]

5-36 Chapter 5: Software support 5.4.3 Intel ® RAID congurations This motherboard supports RAID 0, RAID 1, RAID 5, RAID 10 (0+1) and Intel ® Matrix Storage congurations for Serial A T A hard disks drives through the Intel ® ICH8R Southbridge chip. Setting the RAID item in BIOS Y ou must set the RAID item in the BIOS Setup before you can cr[...]

P5E 5-37 Intel ® Matrix Storage Manager Option ROM Utility The Intel ® Matrix Storage Manager Option ROM utility allows you to create RAID 0, RAID 1, RAID 10 (RAID 0+1), and RAID 5 set(s) from Serial A T A hard disk drives that are connected to the Serial A T A connectors supported by the Southbridge. T o enter the Intel ® Application Accelerato[...]

5-38 Chapter 5: Software support Creating a RAID 0 set (striped) T o create a RAID 0 set: 1. From the utility main menu, select 1. Create RAID V olume, then press <Enter>. This screen appears. 2. Enter a name for the RAID 0 set, then press <Enter>. 3. When the RAID Level item is highlighted, press the up/down arrow key to select RAID 0([...]

P5E 5-39 6. Use the up/down arrow key to select the stripe size for the RAID 0 array , then press <Enter>. The available stripe size values range from 4 KB to 128 KB. The default stripe size is 128 KB. TIP: We recommend a lower stripe size for server systems, and a higher stripe size for multimedia computer systems used mainly for audio and v[...]

5-40 Chapter 5: Software support Creating a RAID 1 set (mirrored) T o create a RAID 1 set: 1. From the utility main menu, select 1. Create RAID V olume, then press <Enter>. This screen appears. 2. Enter a name for the RAID 1 set, then press <Enter>. 3. When the RAID Level item is highlighted, press the up/down arrow key to select RAID 1[...]

P5E 5-41 Creating a RAID 10 set (RAID 0+1) T o create a RAID 10 set: 1. From the utility main menu, select 1. Create RAID V olume, then press <Enter>. This screen appears. Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH9R wRAID5 Copyright(C) 2003-05 Intel Corporation. All Rights Reserved. [ CREATE ARRAY MENU ] [ DISK/VOLUME INFORMA[...]

5-42 Chapter 5: Software support Creating a RAID 5 set (parity) T o create a RAID 5 set: 1. From the utility main menu, select 1. Create RAID V olume, then press <Enter>. This screen appears. Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH9R wRAID5 Copyright(C) 2003-05 Intel Corporation. All Rights Reserved. [ CREATE ARRAY MENU ] [[...]

P5E 5-43 4. The Disks item is highlighted, press <Enter> to select the hard disk drives to congure as RAID. The following pop-up screen appears. [ SELECT DISKS ] [ ↑↓ ]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete Port Drive Model Serial # Size Status 0 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk 1 XXXXXXXXXXXX XXXXXXXX XX.X[...]

5-44 Chapter 5: Software support 5.5 Creating a RAID driver disk A oppy disk with the RAID driver is required when installing Windows ® XP operating system on a hard disk drive that is included in a RAID set. For Windows ® Vista™ operating system, use either a oppy disk or a USB device with the RAID driver . 5.5.1 Creating a RAID driver d[...]

P5E 5-45 T o install the RAID driver in Windows ® Vista™: 1. Insert the oppy disk/USB device with RAID driver into the oppy disk drive/U SB port. 2. During the OS installation, select Intel ICH9R . 3. Follow the succeeding screen instructions to complete the installation.[...]

5-46 Chapter 5: Software support[...]

6 This chapter tells how to install A TI ® CrossFire™ graphics cards to avail of A TI’s Multi-Video Processing technology . ATI ® CrossFire™ technology support[...]

ASUS P5E Chapter summary 6 6.1 Overview ....................................................................................... 6-1 6.2 Installing CrossFire™ graphics cards ....................................... 6-2 6.3 Software information ................................................................... 6-5[...]

ASUS P5E 6-1 6.1 Overview The motherboard supports the A TI ® CrossFire™ technology that allows you to install multi-graphics processing units (GPU) graphics cards. Follow the installation procedures in this section. 6.1.1 Requirements • CrossFire™ Edition graphics card (Master) • CrossFire™-ready graphics card (Slave) • CrossFire™-r[...]

6-2 Chapter 6: A TI ® MVP technology support Slave graphics card Master graphics card 2. Insert the CrossFire™ Edition (Master) graphics card into the PCI Express x16_1 slot. Make sure that the card is properly seated on the slot. 6.2 Installing CrossFire™ graphics cards Before installing a CrossFire™ system, refer to the user guide that cam[...]

ASUS P5E 6-3 3. Insert the CrossFire™-ready (Slave) graphics card into the PCI Express x16_2 slot. Make sure that the card is properly seated on the slot. 4. Connect an auxiliary power source from the power supply to the graphics cards.[...]

6-4 Chapter 6: A TI ® MVP technology support 6. Connect the other end of the external cable to the Slave graphics card. 7. Connect the loose end to the corresponding port on your monitor . 5. Connect one end of the external cable to the Master graphics card. 7 6[...]

ASUS P5E 6-5 6.3 Software information 6.3.1 Installing the device drivers Refer to the documentation that came with your graphics card package to install the device drivers. The A TI CrossFire™ technology supports only the following operating systems: • Windows ® XP 32-bit (Home or Professional) with Service Pack 2 (SP2) • Windows ® XP Prof[...]

6-6 Chapter 6: A TI ® MVP technology support 6. Select the components that you want to install, then click Next . Setup prepares the installation wizard that will guide you to setup process. Windows automatically congures the A TI Catalyst Control Center . The status windows indicates the progress of the installation. 7. The Setup Complete wind[...]

ASUS P5E 6-7 6.3.2 Using the Catalyst™ Control Center The Catalyst™ Control Center allows you to access display features of the A TI hardware and software you installed. Use this application to adjust your graphic settings, enable/disable connected devices, and change your desktop orientation. Launching the Catalyst™ Control Center There are [...]

6-8 Chapter 6: A TI ® MVP technology support The Catalyst™ Control Center Dialog Box View The Catalyst™ Control Center provides two views: Standard - simple view with wizards for beginners Advance - allows advanced users to access and congure the complete features of the software Set to Advance view to enable the CrossFire™ function.[...]

ASUS P5E 6-9 T o enable CrossFire™: 1. Set the view to Advance . 2. Click the Crossre™ item in Graphics Settings. 3. In the CrossFire™ Settings dialog, tick the box opposite Enable CrossFire™ . 4. Click OK to effect the setting. 2 3 4 Hotkeys Click the Hotkeys tab on the Catalyst™ Control Center to access the Hotkeys Manager , which al[...]

6-10 Chapter 6: A TI ® MVP technology support Profiles Click the Proles tab on the Catalyst™ Control Center to access the Proles Manager , which allows you to create customized environments for your desktop, video, and 3D applications. Preferences Click the Preferences tab on the Catalyst™ Control Center to select a language, restore def[...]

ASUS P5E 6-1 1 Help Click the Help tab on the Catalyst™ Control Center to access the online help system, generate a Problem Report, and get the Catalyst™ Control Center version information.[...]

6-12 Chapter 6: A TI ® MVP technology support[...]

A CPU features The Appendix describ es the CPU features and technologies that the motherboard supports as well as the debug code table for the LCD Poster .[...]

P5E Chapter summary A A.1 Intel ® EM64T .................................................................................. A-1 A.2 Enhanced Intel SpeedStep ® T echnology (EIST) ........................ A-1 A.3 Intel ® Hyper-Threading T echnology ........................................... A-3 A.4 Debug Code T able ...............................[...]

P5E A-1 A.1 Intel ® EM64T • The motherboard is fully compatible with Intel ® LGA775 processors running on 32-bit operating systems. • The motherboard comes with a BIOS le that supports EM64T . Y ou can download the latest BIOS le from the ASUS website (www .asus.com/ support/download/) if you need to update the BIOS le. See Chapter 4[...]

A-2 Appendix: CPU features A.2.2 Using the EIST T o use the EIST feature: 1. T urn on the computer , then enter the BIOS Setup. 2. Go to the Advanced Menu, highlight CPU Conguration, then press <Enter>. 3. Set the Intel(R) SpeedStep T echnology item to [Automatic], then press <Enter>. See page 4-26 for details. 4. Press <F10> t[...]

P5E A-3 A.3 Intel ® Hyper-Threading Technology • The motherboard supports Intel ® Pentium ® 4 LGA775 processors with Hyper-Threading T echnology . • Hy per -Thr ead ing Te chn ol ogy is sup por ted und er Win dow s ® Vista/XP and Linux 2.4.x (kernel) and later versions only . Under Linux, use the Hyper- Threading compiler to compile the cod[...]

A-4 Appendix: CPU features A.4 Debug Code Table Code Description CPU INIT CPU Initiation DET CPU T est CMOS R/W functionality . CHIPINIT Early chipset initialization: -Disable shadow RAM -Disable L2 cache (socket 7 or below) -Program basic chipset registers DET DRAM Detect memory -Auto-detection of DRAM size, type and ECC. -Auto-detection of L2 cac[...]

P5E A-5 CPUSPEED 1. Program CPU internal MTRR (P6 & PII) for 0-640K memory address. 2. Initialize the APIC for Pentium class CPU. 3. Program early chipset according to CMOS setup. Example: onboard IDE controller . 4. Measure CPU speed. 5. Invoke video BIOS. TESTVRAM 1. Initialize multi-language 2. Put information on screen display , including A[...]

A-6 Appendix: CPU features CPU CHG CPU change CPR F AIL CPR error F AN F AIL Fan error UCODEERR UCODE error FLOPYERR Floppy error KB ERROR Keyboard error HD ERR HDD error CMOS ERR CMOS error MS ERROR Mouse error 80P ERR 80 port error BOOT CHG Boot device change SMARTERR HDD smart function error HM ERROR Hard monitor error AINETERR AI NET error CASE[...]