Asus P5LD2 SE инструкция обслуживания

Motherboard P5LD2 SE[...]

i i E2377 Revised Edition V2 December 2005 Copyright © 2005 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the [...]

iii Contents Notices ................................................................................................vii Safety information ............................................................................. viii About this guide .................................................................................. ix P5LD2 SE specications[...]

i v Contents 2.7 Connectors ......................................................................... 2-23 2.7.1 Rear panel connectors .......................................... 2-23 2.7.2 Internal connectors ............................................... 2-25 Chapter 3: Powering up 3.1 Starting up for the rst time .............................[...]

v Contents 4.4.2 USB Conguration ................................................. 4-22 4.4.3 CPU Conguration ................................................. 4-23 4.4.4 Chipset .................................................................. 4-25 4.4.5 Onboard Devices Conguration ............................. 4-27 4.4.6 PCI PnP .......[...]

v i A.2 Enhanced Intel SpeedStep ® Technology (EIST) .................... A-1 A.2.1 System requirements .............................................. A-1 A.2.2 Using the EIST ......................................................... A-2 A.3 Intel ® Hyper-Threading Technology ...................................... A-3 Using the Hyper-Threading Te[...]

vii Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has [...]

viii Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect al[...]

i x About this guide This user guide contains the information you need when installing and conguring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports. • Chapter 2: Hardware informati[...]

x Conventions used in this guide To make sure that you perform certain tasks properly, take note of the following symbols used throughout this manual. Typography Bold text Indicates a menu or an item to select. Italics Used to emphasize a word or a phrase. <Key> Keys enclosed in the less-than and greater-than sign means that you must press th[...]

x i P5LD2 SE specications summary (continued on the next page) C P U Chipset Front Side Bus Memory Expansion slots Storage High Definition Audio U S B Wireless LAN (optional) L A N Overclocking Features LGA775 socket for Intel ® Pentium ® D/Pentium ® 4/ Celeron ® processor Compatible with Intel ® PCG 05B/05A and 04B/04A and the latest Intel[...]

xii ASUS Q-Fan ASUS CrashFree BIOS 2 ASUS MyLogo 2 1 x Parallel port 1 x Serial port 1 x PS/2 Keyboard 1 x PS/2 Mouse 1 x LAN (RJ45) port 1 x S/PDIF Out port 4 x USB 2.0 ports 6-channel audio ports 1 x WiFi-g™ antenna port (Wireless Edition only) 1 x Wireless LAN LED (Wireless Edition only) 1 x IDE connector 1 x Floppy disk drive connector 4 x SA[...]

1 Product introduction This chapter describes the motherboard features and the new technologies it supports.[...]

ASUS P5LD2 SE Chapter summary 1 1.1 Welcome! .............................................................................. 1-1 1.2 Package contents ................................................................. 1-1 1.3 Special features .................................................................... 1-2[...]

ASUS P5LD2 SE 1-15 1.1 Welcome! Th an k y ou f or bu yi ng an A SUS ® P5LD2 SE motherboard! The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards! Before you start installing the motherboard, and hardware devices on it, check the items in your package with [...]

1-16 Chapter 1: Product introduction 1.3 Special features 1.3.1 Product highlights Latest processor technology The motherboard comes with a 775-pin surface mount Land Grid Array (LGA) socket designed for the Intel ® Pentium ® 4 processor in the 775-land package. The motherboard supports the Intel ® Pentium ® 4 processor with 1066/800/533 MHz Fr[...]

ASUS P5LD2 SE 1-17 DDR2 memory support Th e mot he rb oar d su ppo rt s DDR 2 me mor y whi ch f eat ur es da ta t ran sf er ra te s of 667/533/400 MHz to meet the higher bandwidth requirements of the latest 3D graphics, multimedia, and Internet applications. The dual-channel DDR2 architecture doubles the bandwidth of your system memory to boost sys[...]

1-18 Chapter 1: Product introduction USB 2.0 technology The motherboard implements the Universal Serial Bus (USB) 2.0 specication, dramatically increasing the connection speed from the 12 Mbps bandwidth on USB 1.1 to a faster 480 Mbps on USB 2.0. USB 2.0 is backward compatible with USB 1.1. See pages 2-24 and 2-28 for details. Gigabit LAN soluti[...]

ASUS P5LD2 SE 1-19 1.3.2 ASUS AI Lifestyle features AI Quiet The ASUS AI Quiet function dynamically controls CPU speed and reduces temperature and fan speeds, thus minimizing noise and ensuring quiet operation. See page 4-33 for details. AI Overclocking This feature allows convenient overclocking up to 30% (depending on the installed CPU and DRAM) [...]

1-20 Chapter 1: Product introduction CPU Lock Free This feature allows you to adjust the CPU multiplier to 14x. Setting the appropriate BIOS setting automatically reduces the CPU multiplier value for more exibility when increasing external FSB. See page 4‑23 for details. CrashFree BIOS 2 Th is fe at ur e a ll ow s y ou t o r es tor e th e o ri[...]

2 Hardware information This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers and connectors on the motherboard.[...]

ASUS P5LD2 SE Chapter summary 2 2.1 Before you proceed .............................................................. 2-1 2.2 Motherboard overview .......................................................... 2-2 2.3 Central Processing Unit (CPU) .............................................. 2-7 2.4 System memory .....................................[...]

ASUS P5LD2 SE 2-1 Onboard LED The motherboard comes with a standby power LED. The green LED lights up to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component. The illustration below shows the loc[...]

2-2 Chapter 2: Hardware information R P5LD2 SE R P5PL2 Below:Mic In Center:Line Out Top:Line In 2.2 Motherboard overview Before you install the motherboard, study the conguration of your chassis to ensure that the motherboard ts into it. Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so can cau[...]

ASUS P5LD2 SE 2-3 2.2.3 Motherboard layout Slot PCI 3 and port connector USB78 are only available in the Non-wireless Edition. Non-wireless Edition 4M b BIOS LGA775 Intel 945P Intel ICH7 CHASSIS CHA_FAN1 SB_PWR PCIEX16 PCI1 PCI2 PCIEX1_1 PCIEX1_2 RLT8 1 11 B Audio PS/2KBMS T :Mouse B:Keyboard SPDIF_O COM1 USB12 LAN_USB34 SA T A1 SA T A3 SA T A2 SA [...]

2-4 Chapter 2: Hardware information Wireless Edition 4M b BIOS LGA775 Intel 945P Intel ICH7 CHASSIS CHA_FAN1 SB_PWR PCIEX16 PCI1 PCI2 PCIEX1_1 PCIEX1_2 RLT8 1 11 B Audio PS/2KBMS T :Mouse B:Keyboard SPDIF_O COM1 USB12 LAN_USB34 SA T A1 SA T A3 SA T A2 SA T A4 Super I/O 30.5cm(12.0in) 19.0cm(7.5in) R P5LD2 SE CR2032 3V Lithium Cell CMOS Power DDR2 D[...]

ASUS P5LD2 SE 2-5 2.2.4 Layout contents Slots Page 1. DDR2 DIMM slots 2-14 2. PCI slots 2-20 3. PCI Express slots 2-20 Jumpers Page 1. Clear RTC RAM (3-pin CLRTC) 2-21 2. USB Device wake-up (3-pin USBPW12, USBPW34, 2-22 USBPW56, USBPW78) Rear panel connectors Page 1. PS/2 mouse port (green) 2-23 2. Parallel port 2-23 3. LAN (RJ-45) port 2-23 4. Lin[...]

2-6 Chapter 2: Hardware information Internal connectors Page 1. Floppy disk drive connector (34-1 pin FLOPPY) 2-25 2. ICH7R Primary IDE connector (40-1 pin PRI_IDE) 2-25 3. Serial ATA connectors (7-pin SATA1 [red], SATA2 [red], 2-26 SATA3 [black], SATA4 [black]) 4. Optical drive audio connector (4-pin CD) 2-27 5. Front panel audio connector (10-1 p[...]

ASUS P5LD2 SE 2-7 2.3.1 Installing the CPU To install a CPU: 1. Locate the CPU socket on the motherboard. 2.3 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA775 socket designed for the Intel ® Pentium ® D, Pentium ® 4 and Celeron ® processor in the 775-land package. Before installing the CPU, make sure that the cam [...]

2-8 Chapter 2: Hardware information 3. Lift the load lever in the direction of the arrow to a 135º angle. 4. Lift the load plate with your thumb and forenger to a 100º angle (A), then push the PnP cap from the load plate window to remove (B). 5. Position the CPU over the socket, making sure that the gold triangle is on the bottom-left corner o[...]

ASUS P5LD2 SE 2-9 The CPU ts in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the socket and damaging the CPU! 6. Close the load plate (A), then push the load lever (B) until it snaps into the retention tab. A B The motherboard supports Intel ® Pentium ® 4 LGA775 processors with the Int[...]

2-10 Chapter 2: Hardware information Fastener Motherboard hole 2.3.2 Installing the CPU heatsink and fan The Intel ® Pentium ® 4 LGA775 processor requires a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance. To install the CPU heatsink and fan: 1. Place the heatsink on top of the installed CPU, makin[...]

ASUS P5LD2 SE 2-11 3. Connect the CPU fan cable to the connector on the motherbo ard labeled CPU_FAN. 2. Push down two fasteners at a time in a diagonal sequence to secure the heatsink and fan assembly in place. B B A A A B B DO NOT forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector. A C[...]

2-12 Chapter 2: Hardware information 2.3.3 Uninstalling the CPU heatsink and fan To uninstall the CPU heatsink and fan: 1. Disconnect the CPU fan cable from the connector on the motherboard. 2. Rotate each fastener counterclockwise. 3. Pull up two fasteners at a time in a diagonal sequence to disengage the heatsink and fan assembly from the motherb[...]

ASUS P5LD2 SE 2-13 5. Rotate each fastener clockwise to ensure correct orientation when reinstalling. The narrow end of the groove should point outward after resetting. (The photo shows the groove shaded for emphasis.) Narrow end of the groove Refer to the documentation in the boxed or stand-alone CPU fan package for detailed information on CPU fan[...]

2-14 Chapter 2: Hardware information 2.4 System memory 2.4.1 Overview The motherboard comes with four Double Data Rate 2 (DDR2) Dual Inline Memory Modules (DIMM) sockets. A DDR2 module has the same physical dimensions as a DDR DIMM but has a 240-pin footprint compared to the 184-pin DDR DIMM. DDR2 DIMMs are notched differently to prevent installati[...]

ASUS P5LD2 SE 2-15 Qualified Vendors Lists (QVL) Side(s): SS - Single-sided DS - Double-sided CL: CAS Latency DIMM support: A - Supports one module inserted into either slot, in Single-channel memory conguration. B - Supports one pair of modules inserted into either the yellow slots or the black slots as one pair of Dual-channel memory congur[...]

2-16 Chapter 2: Hardware information D D R 2 - 6 6 7 D D R 2 - 8 0 0 Side(s): SS - Single-sided DS - Double-sided CL: CAS Latency DIMM support: A - Supports one module inserted into either slot, in Single-channel memory conguration. B - Supports one pair of modules inserted into either the yellow slots or the black slots as one pair of Dual-chan[...]

ASUS P5LD2 SE 2-17 2.4.3 Installing a DIMM Unplug the power supply before adding or removing DIMMs or other system components. Failure to do so can cause severe damage to both the motherboard and the components. To install a DIMM: 1. Unlock a DIMM socket by pressing the retaining clips outward. 2. Align a DIMM on the socket such that the notch on t[...]

2-18 Chapter 2: Hardware information 2.5 Expansion slots In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support. 2.5.1 Installing an expansion card To install an expansion card: 1. Before installing the expansion card, read the documentation that came with it a[...]

ASUS P5LD2 SE 2-19 2.5.3 Interrupt assignments IRQ Priority Standard Function 0 1 System Timer 1 2 Keyboard Controller 2 — Re-direct to IRQ#9 3 11 — 4 12 Communications Port (COM1)* 5 13 IRQ holder for PCI steering* 6 14 Floppy Disk Controller 7 15 Printer Port (LPT1)* 8 3 System CMOS/Real Time Clock 9 4 IRQ holder for PCI steering* 10 5 IRQ ho[...]

2-20 Chapter 2: Hardware information 2.5.4 PCI slots The PCI slots support cards that comply with PCI specications, such as a LAN card, SCSI card, USB card. The gure shows a LAN card installed on a PCI slot. 2.5.5 PCI Express x16 slot This motherboard supports PCI Express x16 graphics cards that comply with the PCI Express specications. Th[...]

ASUS P5LD2 SE 2-21 2.6 Jumpers 1. Clear RTC RAM (CLRTC) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information such as system p[...]

2-22 Chapter 2: Hardware information 2. USB device wake-up jumpers (3-pin USBPW12, USBPW34, USBPW56, USBPW78) Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU, DRAM i[...]

ASUS P5LD2 SE 2-23 1 1 3 4 5 8 9 2 3 11 12 10 6 7 2.7 Connectors 2.7.1 Rear panel connectors 1. PS/2 mouse port (green). This port is for a PS/2 mouse. 2. Parallel port. This 25-pin port connects a parallel printer, a scanner, or other devices. 3. LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN) through a network [...]

2-24 Chapter 2: Hardware information 7. WiFi-g™ antenna port. This port connects to the optional dipolar antenna for the onboard ASUS WiFi-g™ solution. (Wireless Edition only) 8. Microphone phone (pink). This port connects a microphone. Light Blue Line In Front Speaker Out Front Speaker Out Lime Line Out Rear Speaker Out Rear Speaker Out Pink M[...]

ASUS P5LD2 SE 2-25 2. ICH7 Primary IDE connector (40-1 pin PRI_IDE) Thi s con necto r is for an Ul tra DMA 133/1 00/6 6 sig nal c able . The Ultr a DMA 133/100/66 signal cable has three connectors: a blue connector for the primary IDE connector on the motherboard, a black connector for an Ultra DMA 133/100/66 IDE slave device (optical drive/hard di[...]

2-26 Chapter 2: Hardware information 3. Serial ATA connectors (7-pin SATA1 [red], SATA2 [red], SATA3 [black], SATA4 [black]) These connectors are for the Serial ATA signal cables for Serial ATA hard disk drives. Important note on Serial ATA Wh en us ing th e con nec to rs in Standard IDE mode, connect the primary (boot) hard disk drive to the SATA1[...]

ASUS P5LD2 SE 2-27 5. Front panel audio connector (10-1 pin AAFP) Th is co nn ec tor i s for a c has si s-m ou nt ed fr on t p an el au di o I /O m odu le th at su pp or ts HD A udi o st and ar d. Connect one end of the front panel audio I/O module cable to this connector. 4. Optical drive audio connector (4-pin CD) This connector is for the 4-pin [...]

2-28 Chapter 2: Hardware information 6. USB port connectors (10-1 pin USB56, USB78) These connectors are for USB 2.0 ports. Connect the USB/GAME module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specication that supports up to 480 Mbps co[...]

ASUS P5LD2 SE 2-29 8. CPU, Chassis, and Power Fan connectors (4 -p in CP U_ FAN , 3-pin CHA_FAN1, PWR_FAN) The fan conne ctors sup port cooli ng f ans o f 350 mA ~ 2000 mA (24 W max.) or a total of 1 A ~ 3.48 A (41.76 W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matc[...]

2-30 Chapter 2: Hardware information 10 . ATX power connectors (24-pin EATXPW, 4-pin ATX12V) These connectors are for ATX power supply plugs. The power supply plugs are designed to t these connectors in only one orientation. Find the proper orientation and push down rmly until the connectors completely t. • Use of an ATX 12 V Specicat[...]

ASUS P5LD2 SE 2-31 • System power LED (Green 3-pin PLED) This 3-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode. • Hard disk drive activity LED (Red 2-pin IDE_LED) This 2-pin connector i[...]

2-32 Chapter 2: Hardware information[...]

3 Powering up This chapter describes the power up sequence, the vocal POST messages, and ways of shutting down the system.[...]

ASUS P5LD2 SE Chapter summary 3 3.1 Starting up for the rst time ................................................ 3-1 3.2 Powering off the computer ................................................... 3-2[...]

ASUS P5LD2 SE 3-1 3.1 Starting up for the rst time 1. After making all the connections, replace the system case co ver. 2. Make sure that all switches are off. 3. Connect the power cord to the power connector at the back of the system chassis. 4. Connect the power cord to a power outlet that is equipped w ith a surge protector. 5. Turn on the de[...]

3-2 Chapter 3: Powering up 3.2 Powering off the computer 3.2.1 Using the OS shut down function If you are using Windows ® 2000: 1. Click the Start button then click Shut Down... 2. Make sure that the Shut Down option button is selected, then click the OK button to shut down the computer. 3. The power supply should turn off after Windows ® shuts d[...]

4 BIOS setup This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.[...]

ASUS P5LD2 SE Chapter summary 4 4.1 Managing and updating your BIOS ........................................ 4-1 4.2 BIOS setup program ............................................................ 4-11 4.3 Main menu ........................................................................... 4-14 4.4 Advanced menu ...................................[...]

ASUS P5LD2 SE 4-1 4.1 Managing and updating your BIOS The following utilities allow you to manage and update the motherboard Basic Input/Output System (BIOS) setup. 1. ASUS AFUDOS (Updates the BIOS in DOS mode using a bootable oppy disk.) 2. ASUS CrashFree BIOS 2 (Updates the BIOS using a bootable oppy disk or the motherboard support CD when [...]

4-2 Chapter 4: BIOS setup 4.1.2 AFUDOS utility The AFUDOS utility allows you to update the BIOS le in DOS environment using a bootable oppy disk with the updated BIOS le. This utility also allows you to copy the current BIOS le that you can use as backup when the BIOS fails or gets corrupted during the updating process. Copying the curr[...]

ASUS P5LD2 SE 4-3 The utility returns to the DOS prompt after copying the current BIOS le. 3. Press <Enter>. The utility copies the current BIOS le to the oppy disk. A:>afudos /oOLDBIOS1.ROM AM I Fir mw ar e U pd at e U ti li ty - Ver si on 1. 19 (A SUS V 2. 07( 03 .1 1.2 4B B) ) Cop yri ght (C) 200 2 A meri can Meg atr ends , I [...]

4-4 Chapter 4: BIOS setup 5. The utility returns to the DOS prompt after the BIOS update process is completed. Reboot the system from the hard disk drive. 4. The utility veries the le and starts updating the BIOS. DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure! A:>afudos /iP5LD2-SE.ROM AMI Firm[...]

ASUS P5LD2 SE 4-5 4.1.3 ASUS CrashFree BIOS 2 utility The ASUS CrashFree BIOS 2 is an auto recovery tool that allows you to restore the BIOS le when it fails or gets corrupted during the updating process. You can update a corrupted BIOS le using the motherboard support CD or the oppy disk that contains the updated BIOS le. Recovering th[...]

4-6 Chapter 4: BIOS setup The recovered BIOS may not be the latest BIOS version for this motherboard. Visit the ASUS website (www.asus.com) to download the latest BIOS le. Recovering the BIOS from the support CD To recover the BIOS from the support CD: 1. Remove any oppy disk from the oppy disk drive, then turn on the system. 2. Insert the[...]

ASUS P5LD2 SE 4-7 4.1.4 ASUS EZ Flash utility The ASUS EZ Flash feature allows you to update the BIOS without having to go through the long process of booting from a oppy disk and using a DOS-based utility. The EZ Flash utility is built-in the BIOS chip so it is accessible by pressing <Alt> + <F2> during the Power-On Self-Test (POST)[...]

4-8 Chapter 4: BIOS setup Installing ASUS Update To install ASUS Update: 1. Place the support CD in the optical drive. The Drivers menu appears. 2. Click the Utilities tab, then click Install ASUS Update VX.XX.XX . See page 5-3 for the Utilities screen menu. 3. The ASUS Update utility is copied to your system. 4.1.5 ASUS Update utility The ASUS Upd[...]

ASUS P5LD2 SE 4-9 3. Select the ASUS FTP site nearest you to avoid network trafc, or click Auto Select. Click Next. Updating the BIOS through the Internet To update the BIOS through the Internet: 1. Launch the ASUS Update utility from the Windows ® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate. The ASUS Updat[...]

4-10 Chapter 4: BIOS setup Updating the BIOS through a BIOS file To update the BIOS through a BIOS le: 1. Launch the ASUS Update utility from the Windows ® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate. The ASUS Update main window appears. 2. Select Update BIOS from a le option from the drop-down menu, the[...]

ASUS P5LD2 SE 4-11 4.2 BIOS setup program This motherboard supports a programmable rmware chip that you can update using the provided utility described in section “4.1 Managing and updating your BIOS.” Use the BIOS Setup program when you are installing a motherboard, reconguring your system, or prompted to “Run Setup”. This section ex[...]

4-12 Chapter 4: BIOS setup Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure system time. Select Screen Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit System Time [11:51:19] System Date [Thu 09/22/2005] Legacy Diskette A [1.44M, 3.5 in] Primary IDE Master : [ST320413A] Primary [...]

ASUS P5LD2 SE 4-13 4.2.4 Menu items The highlighted item on the menu bar displays the specic items for that menu. For example, selecting Main shows the Main menu items. The other items (Advanced, Power, Boot, and Exit) on the menu bar have their respective menu items. 4.2.5 Sub-menu items A solid triangle before each item on any menu screen mean[...]

4-14 Chapter 4: BIOS setup 4.3 Main menu When you enter the BIOS Setup program, the Main menu screen appears, giving you an overview of the basic system information. 4.3.1 System Time [xx:xx:xx] Allows you to set the system time. 4.3.2 System Date [Day xx/xx/xxxx] Allows you to set the system date. 4.3.3 Legacy Diskette A [1.44M, 3.5 in.] Sets the [...]

ASUS P5LD2 SE 4-15 4.3.4 Primary, Third and Fourth IDE Master/Slave The BIOS automatically detects the connected IDE devices. There is a separate sub-menu for each IDE device. Select a device item, then press <Enter> to display the IDE device information. The BIOS automatically detects the values opposite the dimmed items (Device, Vendor, Siz[...]

4-16 Chapter 4: BIOS setup PIO Mode [4] Selects the PIO mode. Conguration options: [Auto] [0] [1] [2] [3] [4] DMA Mode [Auto] Selects the DMA mode. Conguration options: [Auto] [SWDMA0] [SWDMA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5] SMART Monitoring [Auto] Sets the Smart Monitoring, Analysis, and R[...]

ASUS P5LD2 SE 4-17 Onboard IDE Operate Mode [Enhanced Mode] Allows selection of the IDE operation mode depending on the installed operating system (OS). Set to [Enhanced Mode] if you are using native OS including Windows ® 2000/XP. Conguration options: [Disabled] [Compatible Mode] [Enhanced Mode] Enhanced Mode Support On [S-ATA] Allows you to u[...]

4-18 Chapter 4: BIOS setup 4.3.6 System Information This menu gives you an overview of the general system specications. The BIOS automatically detects the items in this menu. AMI BIOS Displays the auto-detected BIOS information. Processor Displays the auto‑detected CPU specication. System Memory Displays the auto-detected total, appropriate[...]

ASUS P5LD2 SE 4-19 4.4 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. JumperFree Conguration USB Conguration CPU Conguration Chipset Onboard Devices Conguration PCIPnP 4.4.1 JumperFree Configuration AI Overclocking [Auto] Allows you to select the overclocking options to achie[...]

4-20 Chapter 4: BIOS setup FSB/CPU External Frequency Synchronization Front Side Bus CPU External Frequency FSB 1066 266 MHz FSB 800 200 MHz FSB 533 133 MHz The following item appears only when you set the AI Overclocking item to [Manual]. CPU Frequency [XXX] Displays the frequency sent by the clock generator to the system bus and PCI bus. The valu[...]

ASUS P5LD2 SE 4-21 Memory Voltage [Auto] Allows you to select the DDR2 reference voltage. Conguration options: [Auto] [1.80V] [1.90V] [1.95V] [2.00V] Refe r to the D DR2 d ocumen tatio n bef ore ad justi ng th e memo ry vo ltage . Sett ing a very high memor y vol tage may da mage the m emory modul e(s)! CPU VCore Voltage [Auto] Allows you to sel[...]

4-22 Chapter 4: BIOS setup 4.4.2 USB Configuration The items in this menu allows you to change the USB-related features. Select an item then press <Enter> to display the conguration options. The Module Version and USB Devices Enabled items show the auto-detected values. If no USB device is detected, the item shows None. USB Conguration [...]

ASUS P5LD2 SE 4-23 4.4.3 CPU Configuration The items in this menu show the CPU-related information that the BIOS automatically detects. CPU Lock Free [Auto] Allows you to adjust the CPU multiplier to 14x. Setting this item to [Auto] allows the motherboard to automatically reduce the CPU multiplier value for more exibility when increasing the ext[...]

4-24 Chapter 4: BIOS setup Enhanced C1 Control [Auto] When set to [Auto], the BIOS automatically checks CPU capability to enable the C1E support. In C1E mode, the CPU power consumption is lower when idle. Conguration options: [Auto] [Disabled] • Refer to the Appendix for details on how to use the EIST feature. • The motherboard comes with a [...]

ASUS P5LD2 SE 4-25 Advanced Chipset Settings Configure DRAM Timing by SPD [Enabled] When this item is enabled, the DRAM timing parameters are set according to the DRAM SPD (Serial Presence Detect). When disabled, you can manually set the DRAM timing parameters through the DRAM sub-items. The following sub-items appear when this item is disabled. Co[...]

4-26 Chapter 4: BIOS setup Hyper Path 3 [Auto] Allows you to enable or disable the ASUS Hyper Path 3 feature. Conguration options: [Disabled] [Enabled] [Auto] DRAM Throttling Threshold [Auto] Allows you to set DRAM throttling threshold to auto or disabled. Conguration options: [Disabled] [Auto] Boot Graphic Adapter Priority [PCI Express/PCI] [...]

ASUS P5LD2 SE 4-27 4.4.5 Onboard Devices Configuration HD Audio Controller [Enabled] Allows you to enable or disable the high‑denition audio CODEC. Conguration options: [Enabled] [Disabled] OnBoard PCIEX GbE LAN [Enabled] Allows you to enable or disable the onboard PCI Express Gigabit LAN controller. Conguration options: [Disabled] [Enab[...]

4-28 Chapter 4: BIOS setup Parallel Port Mode [ECP] Allows you to select the Parallel Port mode. Conguration options: [Normal] [Bi‑directional] [EPP] [ECP] ECP Mode DMA Channel [DMA3] Appears only when the Parallel Port Mode is set to [ECP]. This item allows you to set the Parallel Port ECP DMA. Conguration options: [DMA0] [DMA1] [DMA3] Par[...]

ASUS P5LD2 SE 4-29 PCI Latency Timer [64] Allows you to select the value in units of PCI clocks for the PCI device latency timer register. Conguration options: [32] [64] [96] [128] [160] [192] [224] [248] Allocate IRQ to PCI VGA [Yes] When set to [Yes], BIOS assigns an IRQ to PCI VGA card if the card requests for an IRQ. When set to [No], BIOS d[...]

4-30 Chapter 4: BIOS setup 4.5 Power menu The Power menu items allow you to change the settings for the ACPI and Advanced Power Management (APM) features. Select an item then press <Enter> to display the conguration options. 4.5.1 Suspend Mode [Auto] Allows you to select the Advanced Conguration and Power Interface (ACPI) state to be us[...]

ASUS P5LD2 SE 4-31 4.5.5 APM Configuration Power Button Mode [On/Off] Allows the system to go into On/Off mode or suspend mode when the power button is pressed. Conguration options: [On/Off] [Suspend] Restore on AC Power Loss [Power Off] When set to Power Off, the system goes into off state after an AC power loss. When set to Power On, the syste[...]

4-32 Chapter 4: BIOS setup RTC Alarm Minute [30] To set t he al arm minut e, hi ghlig ht t his i tem and press the <+> or <‑> key to make the selection. Conguration options: [00] [1]...[59] RTC Alarm Second [30] To set t he al arm second, highlight this item and press the <+> or <‑> key to make the selection. Congu[...]

ASUS P5LD2 SE 4-33 4.5.6 Hardware Monitor Hardware Monitor AI Quiet [Disabled] CPU Temperature [32.5ºC/90.5ºF] MB Temperature [36.0ºC/96.5ºF] CPU Fan Speed (RPM) [3813RPM] CPU Q-Fan Control [Disabled] Chassis Fan1 Speed (RPM) [N/A] Chassis Q-Fan1 Control [Disabled] Power Fan Speed (RPM) [N/A] VCORE Voltage [ 1.320V] 3.3V Voltage [ 3.345V] 5V Vo[...]

4-34 Chapter 4: BIOS setup CPU Fan Speed (RPM) [xxxxRPM] or [N/A] The onboard hardware monitor automatically detects and displays the CPU fan speed in rotations per minute (RPM). If the fan is not connected to the motherboard, the eld shows N/A. CPU Q-Fan Control [Disabled] Allows you to enable or disable the ASUS Q-Fan feature that smartly adju[...]

ASUS P5LD2 SE 4-35 4.6 Boot menu The Boot menu items allow you to change the system boot options. Select an item then press <Enter> to display the sub-menus. Select Screen Select Item Enter Go to Sub-screen F1 General Help F10 Save and Exit ESC Exit APM Conguration Boot Device Priority Boot Settings Conguration Security 4.6.1 Boot Devic[...]

4-36 Chapter 4: BIOS setup 4.6.2 Boot Settings Configuration Quick Boot [Enabled] Enabling this item allows the BIOS to skip so me i te m s of P ow er -O n Se l f- Te st (P O ST ) wh il e bo ot in g t o de cr ea se t he ti me n ee de d to bo ot t he s ys te m. Wh en se t t o [D is ab le d] , B IO S pe rf or ms all the POST items. Conguration opt[...]

ASUS P5LD2 SE 4-37 Interrupt 19 Capture [Disabled] When set to [Enabled], this function allows the option ROMs to trap Interrupt 19. Conguration options: [Disabled] [Enabled] 4.6.3 Security The Security menu items allow you to change the system security settings. Select an item then press <Enter> to display the conguration options. Sele[...]

4-38 Chapter 4: BIOS setup After you have set a supervisor password, the other items appear to allow you to change other security settings. User Access Level [Full Access] This item allows you to select the access restriction to the Setup items. Conguration options: [No Access] [View Only] [Limited] [Full Access] No Access prevents user access t[...]

ASUS P5LD2 SE 4-39 Clear User Password Select this item to clear the user password. Password Check [Setup] When set to [Setup], BIOS checks for user password when accessing the Setup utility. When set to [Always], BIOS checks for user password both when accessing Setup and booting the system. Conguration options: [Setup] [Always] Exit system set[...]

4-40 Chapter 4: BIOS setup Exit & Discard Changes Select this option only if you do not want to save the changes that you made to the Setup program. If you made changes to elds other than System Date, System Time, and Password, the BIOS asks for a conrmation before exiting. Discard Changes Allows you to discard the selections you made and[...]

5 Software support This chapter describes the contents of the support CD that comes with the motherboard package.[...]

ASUS P5LD2 SE Chapter summary 5 5.1 Installing an operating system .............................................. 5-1 5.2 Support CD information ........................................................ 5-1 5.3 Software information ............................................................ 5-8[...]

ASUS P5LD2 SE 5-1 If Autorun is NOT enabled in your computer, browse the contents of the support CD to locate the le ASSETUP.EXE from the BIN folder. Double‑ click the ASSETUP.EXE to run the CD. Click an item to install 5.1 Installing an operating system This motherboard supports Windows ® 2000/2003 Server/XP operating systems (OS). Always in[...]

5-2 Chapter 5: Software support 5.2.2 Drivers menu The Drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices. Intel Chipset Drivers Installs the Intel ® Chipset drivers for the Intel ® 945P chipset. ADI Audio Driver Installs the ADI 1986A audio driver and app[...]

ASUS P5LD2 SE 5-3 5.2.3 Utilities menu The Utilities menu shows the applications and other software that the motherboard supports. ASUS PC Probe II This smart utility monitors the fan speed, CPU temperature, and system voltages, and alerts you of any detected problems. This utility helps you keep your computer in healthy operating condition. ASUS U[...]

5-4 Chapter 5: Software support 5.2.4 Manuals menu The Manuals menu contains a list of supplementary user manuals. Click an item to open the folder of the user manual. Most user manual les are in Portable Document Format (PDF). Install the Adobe ® Acrobat ® Reader from the Utilities menu before opening a user manual le. Intel LGA775 CPU Ins[...]

ASUS P5LD2 SE 5-5 5.2.5 ASUS Contact information Click the Contact tab to display the ASUS contact information. You can also nd this information on the inside front cover of this user guide. 5.2.6 Other information The icons on the top right corner of the screen give additional information on the motherboard and the contents of the support CD. C[...]

5-6 Chapter 5: Software support Browse this CD Displays the support CD contents in graphical format. Technical support Form Displays the ASUS Technical Support Request Form that you have to ll out when requesting technical support.[...]

ASUS P5LD2 SE 5-7 Filelist Displays the contents of the support CD and a brief description of each in text format.[...]

5-8 Chapter 5: Software support 5.3 Software information Most of the applications in the support CD have wizards that will conveniently guide you through the installation. View the online help or readme le that came with the software application for more information. 5.3.1 ASUS MyLogo2™ The ASUS MyLogo2™ utility lets you customize the boot l[...]

ASUS P5LD2 SE 5-9 9. When the screen returns to the ASUS Update utility, ash the original BIOS to load the new boot logo. 10. After ashing the BIOS, restart the computer to display the n ew boot logo during POST. 8. Adjust the boot image to your desired size by selecting a value on the Ratio box. 7. When the logo images appear on the right wi[...]

5-10 Chapter 5: Software support 5.3.2 Audio configurations The ADI AD1986 Azalia audio CODEC provides 6-channel audio capability through the SoundMAX ® Digital Audio System to deliver the ultimate audio experience on your PC. The software implements high quality audio synthesis/rendering, 3D sound positioning, and advanced voice-input technologie[...]

ASUS P5LD2 SE 5-11 Audio preferences The Preferences page of the SoundMAX Digital Audio System allows you to change various audio settings. Listening environment options The section includes the Speaker Setup, Acoustic Environment models, Virtual Ear™ models and the Virtual Theater™ Surround feature. Follow screen instructions to adjust the lis[...]

5-12 Chapter 5: Software support Microphone Follow the screen instructions to congure the microphone to your desired settings. The functions of the Line Out (lime), Line In (blue), and Mic (pink) ports on the rear panel change when you select the 4-channel or 6-channel audio conguration. See the audio conguration table on page 2‑24 for d[...]

A CPU features The Appendix describes the CPU features that the motherboard supports.[...]

ASUS P5LD2 SE Chapter summary A A.1 Intel ® EM64T ......................................................................... A-1 A.2 Enhanced Intel SpeedStep ® Technology (EIST) .................... A-1 A.3 Intel ® Hyper-Threading Technology ...................................... A-3[...]

ASUS P5LD2 SE A-1 A.1 Intel ® EM64T • The motherboard is fully compatible with Intel ® Pentium ® 4 LGA775 processors running on 32-bit operating systems. • The motherboard comes with a BIOS le that supports EM64T. You can download the latest BIOS le from the ASUS website (www.asus. com/support/download/) if you need to update the BIOS [...]

A-2 Appendix: CPU features A.2.2 Using the EIST To use the EIST feature: 1. Tu rn o n t he co mp ut er, t he n e nt er th e BI OS Se tup . 2. Go t o the A dva nc ed Me nu , h ig hl igh t CP U C on g ura ti on , then press <Enter>. 3. Set the Int el (R) S pe edS te p Tec hn olo gy item to [Automatic], then press <Enter>. See page 4-24[...]

ASUS P5LD2 SE A-3 A.3 Intel ® Hyper-Threading Technology • The motherboard supports Intel ® Pentium ® 4 LGA775 processors with Hyper-Threading Technology. • Hyp er -Th rea di ng Tec hn olo gy is su pp ort ed un der Wi nd ows ® XP/2003 Server and Linux 2.4.x (kernel) and later versions only. Under Linux, use the Hyper-Threading compiler to c[...]

A-4 Appendix: CPU features[...]