Asus P5LD2 инструкция обслуживания

Motherboard P5LD2[...]

ii E2706 Revised edition V4 July 2006 Copyright © 2006 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purch[...]

iii Contents Notices ................................................................................................ vi Safety information .............................................................................. vii About this guide ................................................................................. viii P5LD2 specications s[...]

iv Contents Chapter 3: Powering up 3.1 Starting up for the rst time ................................................ 3-1 3.2 Powering off the computer ................................................... 3-2 3.2.1 Using the OS shut down function ........................... 3-2 3.2.2 Using the dual function power switch ..................... 3-2 C[...]

v Contents 4.5 Power menu ........................................................................ 4-33 4.5.1 Suspend Mode ....................................................... 4-33 4.5.2 Repost Video on S3 Resume ................................. 4-33 4.5.3 ACPI 2.0 Support .................................................. 4-33 4.5.4 ACPI APIC [...]

vi Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has b[...]

vii Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all[...]

viii About this guide This user guide contains the information you need when installing and conguring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports. • Chapter 2: Hardware informat[...]

ix Conventions used in this guide To make sure that you perform certain tasks properly, take note of the following symbols used throughout this manual. Typography Bold text Indicates a menu or an item to select. Italics Used to emphasize a word or a phrase. <Key> Key s enc losed in the l ess-t han a nd g reate r-tha n sig n mea ns th at y ou [...]

x LGA775 socket for Intel ® Pentium ® 4/Intel ® Core™ 2 Duo*/Intel ® Core™ 2 Extreme* processor * Only support PCB 2.0 or higher Compatible with Intel ® PCG 06*, 05B/05A and 04B/04A and the latest Intel ® Smitheld dual-core processor Sup por ts I nte l ® Enhanced Memory 64Technology(EM64T) Supports Enhanced Intel SpeedStep ® Technolo[...]

xi Precision Tweaker supports: • 8-step DRAM voltage control • Adjustable CPU core voltage at 0.0125 V increment • Adjustable PCI Express frequency from 90 MHz up to 150 MHz at 1 MHz increment • Stepless Frequency Selection (SFS) from 100 MHz up to 450 MHz at 1 MHz increment ASUS Q-Fan ASUS CrashFree BIOS 2 ASUS MyLogo 4 Mb FLASH ROM, AMI B[...]

xii Device drivers ASUS PC Probe II ASUS Update ASUS AI Booster Microsoft ® DirectX Anti-Virus Utility Adobe Acrobat Reader ASUS Screensaver P5LD2 specications summary Support CD contents *Specications are subject to change without notice.[...]

1 Product introduction This chapter describes the motherboard features and the new technologies it supports.[...]

ASUS P5LD2 Chapter summary 1 1.1 Welcome! .............................................................................. 1-1 1.2 Package contents ................................................................. 1-1 1.3 Special features .................................................................... 1-2[...]

ASUS P5LD2 1-1 1.1 Welcome! Th an k y ou f or bu yi ng an A SUS ® P5LD2 motherboard! The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards! Before you start installing the motherboard, and hardware devices on it, check the items in your package with the lis[...]

1-2 Chapter 1: Product introduction 1.3 Special features 1.3.1 Product highlights Latest processor technology The motherboard comes with a 775-pin surface mount Land Grid Array (LGA) socket designed for the Intel ® Pentium ® 4 processor in the 775-land package. The motherboard supports the Intel ® Pentium ® 4 processor with 1066/800/533 MHz Fro[...]

ASUS P5LD2 1-3 Serial ATA technology The motherboard supports the Serial ATA technology through the Serial ATA interfaces and the Intel ® ICH7R. The SATA specication allows for thinner, more exible cables with lower pin count, reduced voltage requirement, and up to 300 MB/s data transfer rate. See pages 2-25 to 2-26 for details. Onboard RAID[...]

1-4 Chapter 1: Product introduction USB 2.0 technology The motherboard implements the Universal Serial Bus (USB) 2.0 specication, dramatically increasing the connection speed from the 12 Mbps bandwidth on USB 1.1 to a fast 480 Mbps on USB 2.0. USB 2.0 is backward compatible with USB 1.1. See pages 2-23 and 2-28 for details. Gigabit LAN solution [...]

ASUS P5LD2 1-5 1.3.2 ASUS AI Lifestyle features AI Quiet The ASUS AI Quiet function dynamically controls CPU speed and reduces temperature and fan speeds, thus minimizing noise and ensuring quiet operation. See page 4-36 for details. WiFi-TV Card (optional) The ASUS WiFi-TV card complies with the IEEE 802.11a/b/g standard for wireless LAN and allow[...]

1-6 Chapter 1: Product introduction Precision Tweaker This feature allows you to ne-tune the CPU/memory voltage and gradually increase the Front Side Bus (FSB) and PCI Express frequency to achieve maximum system performance. See pages 4-20 to 4-21 for details. PEG Link Mode This feature enhances your PCI Express graphics card performance by allo[...]

2 Hardware information This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers and connectors on the motherboard.[...]

ASUS P5LD2 Chapter summary 2 2.1 Before you proceed .............................................................. 2-1 2.2 Motherboard overview .......................................................... 2-2 2.3 Central Processing Unit (CPU) .............................................. 2-6 2.4 System memory ........................................[...]

ASUS P5LD2 2-1 Onboard LED The motherboard comes with a standby power LED. The green LED lights up to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component. The illustration below shows the locati[...]

2-2 Chapter 2: Hardware information P5L D2 ® 2.2 Motherboard overview Before you install the motherboard, study the conguration of your chassis to ensure that the motherboard ts into it. Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so can cause you physical injury and damage motherboard comp[...]

ASUS P5LD2 2-3 2.2.3 Motherboard layout P5 LD 2 ® CR2032 3V Lithium Cell CMOS Power CD LPC I/O Winbond W83627EHF Intel FWH 4Mbit A TX12V FLOPPY AA FP DDR2 DIMM_A1 (64 bit,240-pin module) KBPWR SB_PWR 23cm (9in) 30.5cm (12.0in) P ANEL CHASSIS GAME USB78 USB56 USBPW56 USBPW78 SEC_EIDE PRI_EIDE CLRTC SA TA 1 PCIEX1_1 PCIEX1_2 PCIEX1_3 PCI2 PCI3 Intel[...]

2-4 Chapter 2: Hardware information 2.2.4 Layout contents Slots Page 1. DDR2 DIMM slots 2-13 2. PCI slots 2-19 3. PCI Express slot 2-19 Jumpers Page 1. Clear RTC RAM (3-pin CLRTC) 2-20 2. USB Device wake-up (3-pin USBPW12, USBPW34, 2-21 USBPW56, USBPW78) 3. Keyboard power (3-pin KBPWR) Rear panel connectors Page 1. PS/2 mouse port (green) 2-22 2. P[...]

ASUS P5LD2 2-5 Internal connectors Page 1. Floppy disk drive connector (34-1 pin FLOPPY) 2-24 2. ITE IDE connectors (40-1 pin PRI_EIDE [red], SEC_EIDE [red]) 2-24 3. ICH7R Primary IDE connector (40-1 pin PRI_IDE) 2-25 4. Serial ATA connectors (7-pin SATA1 [red], SATA2 [red], 2-25 SATA3 [black], SATA4 [black]) 5. Optical drive audio connector (4-pin[...]

2-6 Chapter 2: Hardware information 2.3.1 Installing the CPU To install a CPU: 1. Locate the CPU socket on the motherboard. 2.3 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA775 socket designed for the Intel ® Pentium ® 4 processor in the 775-land package Before installing the CPU, make sure that the cam box is facin[...]

ASUS P5LD2 2-7 3. Lift the load lever in the direction of the arrow to a 135º angle. 4. Lift the load plate with your thumb and forenger to a 100º angle (A), then push the PnP cap from the load plate window to remove (B). 5. Position the CPU over the socket, making sure that the gold triangle is on the bottom-left corner of the socket. The soc[...]

2-8 Chapter 2: Hardware information The CPU ts in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the socket and damaging the CPU! 6. Close the load plate (A), then push the load lever (B) until it snaps into the retention tab. A B The motherboard supports Intel ® Pentium ® 4 LGA775 proce[...]

ASUS P5LD2 2-9 Fastener Motherboard hole 2.3.2 Installing the CPU heatsink and fan The Intel ® Pentium ® 4 LGA775 processor requires a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance. To install the CPU heatsink and fan: 1. Place the heatsink on top of the installed CPU, making sure that the four f[...]

2-10 Chapter 2: Hardware information 3. Connect the CPU fan cable to the connector on the motherboard labeled CPU_FAN. 2. Push down two fasteners at a time in a diagonal sequence to secure the heatsink and fan assembly in place. B B A A A A B B Do not forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug [...]

ASUS P5LD2 2-11 2.3.3 Uninstalling the CPU heatsink and fan To uninstall the CPU heatsink and fan: 1. Disconnect the CPU fan cable from the connector on the motherboard. 2. Rotate each fastener counterclockwise. 3. Pull up two fasteners at a time in a diagonal sequence to disengage the heatsink and fan assembly from the motherboard. B B A A A A B B[...]

2-12 Chapter 2: Hardware information 5. Rotate each fastener clockwise to ensure correct orientation when reinstalling. The narrow end of the groove should point outward after resetting. (The photo shows the groove shaded for emphasis.) Narrow end of the groove Refer to the documentation in the boxed or stand-alone CPU fan package for detailed info[...]

ASUS P5LD2 2-13 2.4 System memory 2.4.1 Overview The motherboard comes with four Double Data Rate 2 (DDR2) Dual Inline Memory Modules (DIMM) sockets. A DDR2 module has the same physical dimensions as a DDR DIMM but has a 240-pin footprint compared to the 184-pin DDR DIMM. DDR2 DIMMs are notched differently to prevent installation on a DDR DIMM sock[...]

2-14 Chapter 2: Hardware information Qualied Vendors Lists (QVL) Size Vendor Model CL Brand S i d e ( s ) Component A B C D IM M s up po rt DDR2-533 512 MB SAMSUNG M378T6553BG0-CD5 N/A N/A SS K4T51083QB-GCD5 • • • 256 MB SAMSUNG M378T3253FG0-CD5 4 N/A SS K4T56083QF-GCD5 • • • 512 MB SAMSUNG M378T6453FG0-CD5 4 N/A DS K4T56083QF-GCD5 ?[...]

ASUS P5LD2 2-15 Side(s): SS - Single-sided DS - Double-sided CL: CAS Latency DIMM support: A - Supports one module inserted into either slot, in Single-channel memory conguration. B - Supports one pair of modules inserted into either the yellow slots or the black slots as one pair of Dual-channel memory conguration. C - Supports two pairs of [...]

2-16 Chapter 2: Hardware information 2.4.3 Installing a DIMM Unplug the power supply before adding or removing DIMMs or other system components. Failure to do so can cause severe damage to both the motherboard and the components. To install a DIMM: 1. Unlock a DIMM socket by pressing the retaining clips outward. 2. Align a DIMM on the socket such t[...]

ASUS P5LD2 2-17 2.5 Expansion slots In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support. 2.5.1 Installing an expansion card To install an expansion card: 1. Before installing the expansion card, read the documentation that came with it and make the necessary[...]

2-18 Chapter 2: Hardware information 2.5.3 Interrupt assignments * These IRQs are usually available for ISA or PCI devices. Standard interrupt assignments IRQ Priority Standard Function 0 1 System Timer 1 2 Keyboard Controller 2 — Re-direct to IRQ#9 3 11 — 4 12 Communications Port (COM1)* 5 13 IRQ holder for PCI steering* 6 14 Floppy Disk Contr[...]

ASUS P5LD2 2-19 2.5.4 PCI slots The PCI slots support cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI specications. The gure shows a LAN card installed on a PCI slot. 2.5.5 PCI Express x16 slot This motherboard supports PCI Express x16 graphic cards that comply with the PCI Express specications. The foll[...]

2-20 Chapter 2: Hardware information 2.6 Jumpers 1. Clear RTC RAM (CLRTC) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup informatio[...]

ASUS P5LD2 2-21 3. Keyboard power (3-pin KBPWR) Thi s jum per a llow s you to e nable or disab le th e ke yboar d wak e-up fea ture. Set this jump er to pins 2-3 (+5V SB) to wa ke up the comp uter whe n you pres s a key o n the keyb oard (the defa ult is th e Spa ce Ba r). Thi s fea ture requ ires an AT X pow er s upply that can supp ly at leas t 1[...]

2-22 Chapter 2: Hardware information 2.7 Connectors 2.7.1 Rear panel connectors 1. PS/2 mouse port (green). This port is for a PS/2 mouse. 2. Parallel port. This 25-pin port connects a parallel printer, a scanner, or other devices. 3. LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN) through a network hub. Refer to[...]

ASUS P5LD2 2-23 10. USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices. 11. USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices. 12. Serial port. This port connects a mouse, modem, or other devices that conform with ser[...]

2-24 Chapter 2: Hardware information 2.7.2 Internal connectors 1. Floppy disk drive connector (34-1 pin FLOPPY) This connector is for the provided oppy disk drive (FDD) signal cable. Insert one end of the cable to this connector, then connect the other end to the signal connector at the back of the oppy disk drive. Pin 5 on the connector is r[...]

ASUS P5LD2 2-25 4. Serial ATA connectors (7-pin SATA1 [red], SATA2 [red], SATA3 [black], SATA4 [black]) These connectors are for the Serial ATA signal cables for Serial ATA hard disk drives. If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID 1, RAID 5, or RAID 10 conguration with the Intel ® Matrix Storage Technology th[...]

2-26 Chapter 2: Hardware information Important notes on Serial ATA • You must install Windows ® 2000 Service Pack 4 or the Windows ® XP Service Pack 1 before using Serial ATA hard disk drives. The Serial ATA RAID feature (RAID 0/RAID 1/RAID 5/ RAID 10) is available only when you are using Windows ® 2000/XP. • Wh en us ing th e con nec to rs [...]

ASUS P5LD2 2-27 6. Front panel audio connector (10-1 pin AAFP) Th is co nn ec tor i s for a c has si s-m ou nt ed fr on t p an el au di o I /O m odu le th at su pp or ts ei th er HD A udi o or le ga cy AC ’9 7 a ud io st an da rd. • We recommend that you connect a high-denition front panel audio module to this connector to avail the motherbo[...]

2-28 Chapter 2: Hardware information 7. USB port connectors (10-1 pin USB56, USB78) These connectors are for USB 2.0 ports. Connect the USB/GAME module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specication that supports up to 480 Mbps co[...]

ASUS P5LD2 2-29 9. CPU, Chassis, and Power Fan connectors (4 -p in CP U_ FAN , 3-pin CHA_FAN1, CHA_FAN2, PWR_FAN) The fan conne ctors sup port cooli ng f ans o f 350 mA ~ 2000 mA (24 W max.) or a total of 1 A ~ 3.48 A (41.76 W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cab[...]

2-30 Chapter 2: Hardware information 11. AT X pow er c onn ec to rs (2 4- pin E ATX PW , 4-p in A TX1 2V ) These connectors are for ATX power supply plugs. The power supply plugs are designed to t these connectors in only one orientation. Find the proper orientation and push down rmly until the connectors completely t. • Use of an ATX 12[...]

ASUS P5LD2 2-31 • System power LED (Green 3-pin PLED) This 3-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode. • Hard disk drive activity LED (Red 2-pin IDE_LED) This 2-pin connector is f[...]

2-32 Chapter 2: Hardware information[...]

3 Powering up This chapter describes the power up sequence, the vocal POST messages, and ways of shutting down the system.[...]

ASUS P5LD2 Chapter summary 3 3.1 Starting up for the rst time ................................................ 3-1 3.2 Powering off the computer ................................................... 3-2[...]

ASUS P5LD2 3-1 3.1 Starting up for the rst time 1. After making all the connections, replace the system case cover. 2. Be sure that all switches are off. 3. Connect the power cord to the power connector at the back of the system chassis. 4. Connect the power cord to a power outlet that is equipped with a surge protector. 5. Turn on the devices i[...]

3-2 Chapter 3: Powering up 3.2 Powering off the computer 3.2.1 Using the OS shut down function If you are using Windows ® 2000: 1. Click the Start button then click Shut Down... 2. Make sure that the Shut Down option button is selected, then click the OK button to shut down the computer. 3. The power supply should turn off after Windows ® shuts d[...]

4 BIOS setup This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.[...]

ASUS P5LD2 Chapter summary 4 4.1 Managing and updating your BIOS ........................................ 4-1 4.2 BIOS setup program ............................................................ 4-11 4.3 Main menu ........................................................................... 4-14 4.4 Advanced menu ......................................[...]

ASUS P5LD2 4-1 4.1 Managing and updating your BIOS The following utilities allow you to manage and update the motherboard Basic Input/Output System (BIOS) setup. 1. ASUS AFUDOS (Updates the BIOS in DOS mode using a bootable oppy disk.) 2. ASUS CrashFree BIOS 2 (Updates the BIOS using a bootable oppy disk or the motherboard support CD when the[...]

4-2 Chapter 4: BIOS setup 4.1.2 AFUDOS utility The AFUDOS utility allows you to update the BIOS le in DOS environment using a bootable oppy disk with the updated BIOS le. This utility also allows you to copy the current BIOS le that you can use as backup when the BIOS fails or gets corrupted during the updating process. Copying the curr[...]

ASUS P5LD2 4-3 The utility returns to the DOS prompt after copying the current BIOS le. 3. Press <Enter>. The utility copies the current BIOS le to the oppy disk. A:>afudos /oOLDBIOS1.rom AM I Fi rm wa re U pd at e Ut il it y - Ve rs io n 1. 19 (A SU S V2 .0 7( 03 .1 1. 24 BB )) Co pyr igh t ( C) 200 2 A mer ican Me gat ren ds, I[...]

4-4 Chapter 4: BIOS setup 5. The utility returns to the DOS prompt after the BIOS update process is completed. Reboot the system from the hard disk drive. A:>afudos /iP5LD2.rom AM I Fi rm wa re U pd at e Ut il it y - Ve rs io n 1. 19 (A SU S V2 .0 7( 03 .1 1. 24 BB )) Co pyr igh t ( C) 200 2 A mer ican Me gat ren ds, In c. All ri ght s r ese rv[...]

ASUS P5LD2 4-5 4.1.3 ASUS CrashFree BIOS 2 utility The ASUS CrashFree BIOS 2 is an auto recovery tool that allows you to restore the BIOS le when it fails or gets corrupted during the updating process. You can update a corrupted BIOS le using the motherboard support CD or the oppy disk that contains the updated BIOS le. Recovering the B[...]

4-6 Chapter 4: BIOS setup The recovered BIOS may not be the latest BIOS version for this motherboard. Visit the ASUS website (www.asus.com) to download the latest BIOS le. Recovering the BIOS from the support CD To recover the BIOS from the support CD: 1. Remove any oppy disk from the oppy disk drive, then turn on the system. 2. Insert the[...]

ASUS P5LD2 4-7 4.1.4 ASUS EZ Flash utility The ASUS EZ Flash feature allows you to update the BIOS without having to go through the long process of booting from a oppy disk and using a DOS-based utility. The EZ Flash utility is built-in the BIOS chip so it is accessible by pressing <Alt> + <F2> during the Power-On Self Tests (POST). [...]

4-8 Chapter 4: BIOS setup Installing ASUS Update To install ASUS Update: 1. Place the support CD in the optical drive. The Drivers menu appears. 2. Click the Utilities tab, then click Install ASUS Update VX.XX.XX. See page 5-4 for the Utilities screen menu. 3. The ASUS Update utility is copied to your system. 4.1.5 ASUS Update utility The ASUS Upda[...]

ASUS P5LD2 4-9 3. Select the ASUS FTP site nearest you to avoid network trafc, or click Auto Select. Click Next. Updating the BIOS through the Internet To update the BIOS through the Internet: 1. Launch the ASUS Update utility from the Windows ® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate. The ASUS Update m[...]

4-10 Chapter 4: BIOS setup Updating the BIOS through a BIOS le To update the BIOS through a BIOS le: 1. Launch the ASUS Update utility from the Windows ® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate. The ASUS Update main window appears. 2. Select Update BIOS from a le option from the drop-down menu, th[...]

ASUS P5LD2 4-11 4.2 BIOS setup program This motherboard supports a programmable rmware chip that you can update using the provided utility described in section “4.1 Managing and updating your BIOS.” Use the BIOS Setup program when you are installing a motherboard, reconguring your system, or prompted to “Run Setup”. This section expla[...]

4-12 Chapter 4: BIOS setup Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure system time. Select Screen Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit System Time [11:51:19] System Date [Thu 05/07/2004] Legacy Diskette A [1.44M, 3.5 in] Primary IDE Master : [ST320413A] Primary [...]

ASUS P5LD2 4-13 4.2.4 Menu items The highlighted item on the menu bar displays the specic items for that menu. For example, selecting Main shows the Main menu items. The other items (Advanced, Power, Boot, and Exit) on the menu bar have their respective menu items. 4.2.5 Sub-menu items A solid triangle before each item on any menu screen means t[...]

4-14 Chapter 4: BIOS setup 4.3 Main menu When you enter the BIOS Setup program, the Main menu screen appears, giving you an overview of the basic system information. 4.3.1 System Time [xx:xx:xx] Allows you to set the system time. 4.3.2 System Date [Day xx/xx/xxxx] Allows you to set the system date. 4.3.3 Legacy Diskette A [1.44M, 3.5 in.] Sets the [...]

ASUS P5LD2 4-15 4.3.4 Primary, Third and Fourth IDE Master/Slave The BIOS automatically detects the connected IDE devices. There is a separate sub-menu for each IDE device. Select a device item, then press <Enter> to display the IDE device information. The BIOS automatically detects the values opposite the dimmed items (Device, Vendor, Size, [...]

4-16 Chapter 4: BIOS setup PIO Mode [4] Selects the PIO mode. Conguration options: [Auto] [0] [1] [2] [3] [4] DMA Mode [Auto] Selects the DMA mode. Conguration options: [Auto] [SWDMA0] [SWDMA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5] SMART Monitoring [Auto] Sets the Smart Monitoring, Analysis, and R[...]

ASUS P5LD2 4-17 Onboard IDE Operate Mode [Enhanced Mode] Allows selection of the IDE operation mode depending on the installed operating system (OS). Set to [Enhanced Mode] if you are using native OS including Windows ® 2000/XP. Conguration options: [Disabled] [Compatible Mode] [Enhanced Mode] Enhanced Mode Support On [S-ATA] Allows you to use [...]

4-18 Chapter 4: BIOS setup 4.3.6 System Information This menu gives you an overview of the general system specications. The BIOS automatically detects the items in this menu. AMI BIOS Displays the auto-detected BIOS information. Processor Displays the auto-detected CPU specication. System Memory Displays the auto-detected total, appropriated [...]

ASUS P5LD2 4-19 4.4 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. JumperFree Conguration LAN Cable Status USB Conguration CPU Conguration Chipset Onboard Devices Conguration PCIPnP 4.4.1 JumperFree Conguration AI Overclocking [Auto] Allows you to select the overclocking o[...]

4-20 Chapter 4: BIOS setup FSB/CPU External Frequency Synchronization The following item appears only when you set the AI Overclocking item to [Manual]. CPU Frequency [XXX] Displays the frequency sent by the clock generator to the system bus and PCI bus. The value of this item is auto-detected by the BIOS. Use the <+> and <-> keys to ad[...]

ASUS P5LD2 4-21 The following items also appear when the AI Overclocking item is set to [AI NOS]. Memory Voltage [Auto] Allows you to select the DDR2 reference voltage. Conguration options: [Auto] [1.80V] [1.90V] [1.95V] [2.00V] [2.10V] [2.15V] [2.20V] [2.30V] Refe r to the D DR2 d ocumen tatio n bef ore ad justi ng th e memo ry vo ltage . Sett [...]

4-22 Chapter 4: BIOS setup The following item appears only when the AI Overclocking item is set to [AI NOS]. N.O.S. Mode [Auto] Sets the Non-Delay Overclocking System mode. Setting to [Auto] loads the optimum sensitivity and overclocking percentage setting. Conguration options: [Auto] [Manual] The following items appear only when the N.O.S. Mode[...]

ASUS P5LD2 4-23 4.4.2 LAN Cable Status This menu displays the status of the Local Area Network (LAN) cable connected to the LAN (RJ-45) port. POST Check LAN Cable [Disabled] Allows you to enable or disable LAN cable check during POST. When enabled, the menu reports the cable faults or shorts, and displays the point (length) where the fault or short[...]

4-24 Chapter 4: BIOS setup 4.4.3 USB Conguration The items in this menu allows you to change the USB-related features. Select an item then press <Enter> to display the conguration options. USB Function [Enabled] Allows the BIOS to auto-detect the number of USB ports in your system. Setting this item to [Disable] disables the USB device [...]

ASUS P5LD2 4-25 4.4.4 CPU Conguration The items in this menu show the CPU-related information that the BIOS automatically detects. Ratio CMOS Setting [ 8] Sets the ratio between the CPU core clock and the Front Side Bus frequency. The BIOS auto-detects the default value of this item. Use the <+> or <-> keys to adjust the values. Con?[...]

4-26 Chapter 4: BIOS setup Max CPUID Value Limit [Disabled] Setting this item to [Enabled] allows legacy operating systems to boot even without support for CPUs with extended CPUID functions. Conguration options: [Disabled] [Enabled] Execute Disable Function [Disabled] Allows you to enable or disable the no execution on page protection technolog[...]

ASUS P5LD2 4-27 Advanced Chipset Settings Congure DRAM Timing by SPD [Enabled] When this item is enabled, the DRAM timing parameters are set according to the DRAM SPD (Serial Presence Detect). When disabled, you can manually set the DRAM timing parameters through the DRAM sub-items. The following sub-items appear when this item is Disabled. Con?[...]

4-28 Chapter 4: BIOS setup Hyper Path 3 [Auto] Allows you to enable or disable the ASUS Hyper Path 3 feature. Conguration options: [Disabled] [Enabled] [Auto] Booting Graphic Adapter Priority [PCI Express/PCI] Allows selection of the graphics controller to use as primary boot device. Conguration options: [PCI Express/PCI] [PCI/PCI Express] PE[...]

ASUS P5LD2 4-29 4.4.6 Onboard Devices Conguration HD Audio Controller [Enabled] Allows you to enable or disable the high-denition audio CODEC. Conguration options: [Enabled] [Disabled] Front Panel Support Type [HD Audio] Al lo ws yo u to se t the f ro nt pa nel a ud io co nn ect or ( AAA F) m ode t o leg ac y AC ‘9 7 o r hi gh– de n[...]

4-30 Chapter 4: BIOS setup Detecting Device Time [Quick Mode] Sets the time the ITE8211F IDE controller detects devices connected to the IDE connectors. This item appears only when the ITE8211F Controller is set to IDE Mode. Conguration options: [Standard Mode] [Quick Mode] Serial Port1 Address [3F8/IRQ4] Allows you to select the Serial Port1 ba[...]

ASUS P5LD2 4-31 4.4.7 PCI PnP The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices. The menu includes setting IRQ and DMA channel resources for either PCI/PnP or legacy ISA devices, and setting the memory size block for legacy ISA devices. Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit E[...]

4-32 Chapter 4: BIOS setup IRQ-xx assigned to [PCI Device] When set to [PCI Device], the specic IRQ is free for use of PCI/PnP devices. When set to [Reserved], the IRQ is reserved for legacy ISA devices. Conguration options: [PCI Device] [Reserved][...]

ASUS P5LD2 4-33 4.5 Power menu The Power menu items allow you to change the settings for the ACPI and Advanced Power Management (APM) features. Select an item then press <Enter> to display the conguration options. 4.5.1 Suspend Mode [Auto] Allows you to select the Advanced Conguration and Power Interface (ACPI) state to be used for syst[...]

4-34 Chapter 4: BIOS setup 4.5.5 APM Conguration Power Button Mode [On/Off] Allows the system to go into On/Off mode or suspend mode when the power button is pressed. Conguration options: [On/Off] [Suspend] Restore on AC Power Loss [Power Off] When set to Power Off, the system goes into off state after an AC power loss. When set to Power On, [...]

ASUS P5LD2 4-35 RTC Alarm Minute To set t he al arm minut e, hi ghlig ht t his i tem and press the <+> or <-> key to make the selection. Conguration options: [00] [1]... ~ [59] RTC Alarm Second To set t he al arm second, highlight this item and press the <+> or <-> key to make the selection. Conguration options: [00] [[...]

4-36 Chapter 4: BIOS setup 4.5.6 Hardware Monitor Hardware Monitor AI Quiet [Disabled] CPU Q-Fan Control [Disabled] CPU Temperature [32.5ºC/90.5ºF] MB Temperature [36.0ºC/96.5ºF] CPU Fan Speed (RPM) [3813RPM] Chassis Fan1 Speed (RPM) [N/A] Chassis Fan2 Speed (RPM) [N/A] Power Fan Speed (RPM) [N/A] VCORE Voltage [ 1.320V] 3.3V Voltage [ 3.345V] [...]

ASUS P5LD2 4-37 CPU Fan Prole Mode [Optimal] Allows you to set the appropriate CPU fan performance level. When set to [Optimal], the CPU fan speed automatically adjusts depending on the CPU temperature. Set this item to [Silent Mode] for silent CPU fan operation or [Performance Mode] to achieve the maximum CPU fan speed. Conguration options: [...]

4-38 Chapter 4: BIOS setup 4.6 Boot menu The Boot menu items allow you to change the system boot options. Select an item then press <Enter> to display the sub-menu. Select Screen Select Item Enter Go to Sub-screen F1 General Help F10 Save and Exit ESC Exit APM Conguration Boot Device Priority Boot Settings Conguration Security 4.6.1 Boo[...]

ASUS P5LD2 4-39 4.6.2 Boot Settings Conguration Quick Boot [Enabled] Enabling this item allows the BIOS to skip some power on self tests (POST) while booting to decrease the time needed to boot the system. When set to [Disabled], BIOS performs all the POST items. Conguration options: [Disabled] [Enabled] Full Screen Logo [Enabled] Allows you [...]

4-40 Chapter 4: BIOS setup Interrupt 19 Capture [Disabled] When set to [Enabled], this function allows the option ROMs to trap Interrupt 19. Conguration options: [Disabled] [Enabled] 4.6.3 Security The Security menu items allow you to change the system security settings. Select an item then press <Enter> to display the conguration optio[...]

ASUS P5LD2 4-41 After you have set a supervisor password, the other items appear to allow you to change other security settings. User Access Level [Full Access] This item allows you to select the access restriction to the Setup items. Conguration options: [No Access] [View Only] [Limited] [Full Access] No Access prevents user access to the Setup[...]

4-42 Chapter 4: BIOS setup Clear User Password Select this item to clear the user password. Password Check [Setup] When set to [Setup], BIOS checks for user password when accessing the Setup utility. When set to [Always], BIOS checks for user password both when accessing Setup and booting the system. Conguration options: [Setup] [Always][...]

ASUS P5LD2 4-43 Exit & Discard Changes Select this option only if you do not want to save the changes that you made to the Setup program. If you made changes to elds other than System Date, System Time, and Password, the BIOS asks for a conrmation before exiting. Discard Changes Allows you to discard the selections you made and restore th[...]

4-44 Chapter 4: BIOS setup Load Setup Defaults Allows you to load the default values for each of the parameters on the Setup menus. When you select this option or if you press <F5>, a conrmation window appears. Select <OK> to load the default values. Select Exit & Save Changes or make other changes before saving the values to the[...]

5 Software support This chapter describes the contents of the support CD that comes with the motherboard package.[...]

ASUS P5LD2 Chapter summary 5 5.1 Installing an operating system .............................................. 5-1 5.2 Support CD information ........................................................ 5-1 5.3 Software information ............................................................ 5-9 5.4 RAID congurations ................................[...]

ASUS P5LD2 5-1 5.1 Installing an operating system This motherboard supports Windows ® 2000/XP operating systems (OS). Always install the latest OS version and corresponding updates to maximize the features of your hardware. 5.2 Support CD information The support CD that came with the motherboard package contains the drivers, software applications,[...]

5-2 Chapter 5: Software support 5.2.2 Drivers menu The Driv ers m enu s hows the avail able devi ce dr ivers if the s ystem det ects ins talle d dev ices . Ins tall the n eces sary drive rs t o act ivate the devi ces. The screen display and driver options vary under different operating system versions. QFE Driver Installs the Quick Fix Engineering [...]

ASUS P5LD2 5-3 ITE8211 IDE Driver Installs the ITE8211 IDE controller driver. USB 2.0 Driver Installs the USB 2.0 driver. 5.2.3 Makedisk menu The Makedisk menu allows you to create a driver disk for the onboard RAID and IDE controllers. A driver disk is required when installing the RAID or IDE drivers during OS installation. The screen display and [...]

5-4 Chapter 5: Software support 5.2.3 Utilities menu The Utilities menu displays the software applications and utilities that the motherboard supports. Click on an item to install. Marvell Yukon VCT Application The Virt ual C able Test er (V CT) i s a cable diag nost ic ap plica tion that anal yzes and repo rts L AN c able fault s and sho rts. See [...]

ASUS P5LD2 5-5 5.2.4 Manuals menu The Manuals menu contains the user manuals for third party components and applications. Most user manual les are in Portable Document Format (PDF). Install the Adobe Acrobat Reader application from the Utilities tab before opening a user manual le. Microsoft DirectX ® 9.0c The Microsoft DirectX ® 9.0c is a [...]

5-6 Chapter 5: Software support 5.2.5 Contact information Click the Contact tab to display the ASUS contact information. You can also nd this information on the inside front cover of this user guide. 5.2.6 Other information The icons on the top right corner of the screen provide additional information on the motherboard and the contents of the s[...]

ASUS P5LD2 5-7 Technical Support Form Displays the ASUS Technical Support Request Form that you have to ll out when requesting technical support. Browse this CD Displays the contents of the support CD in graphical format.[...]

5-8 Chapter 5: Software support Filelist Displays the contents of the support CD in text format.[...]

ASUS P5LD2 5-9 5.3 Software information Most of the applications in the support CD have wizards that will conveniently guide you through the installation. View the online help or readme le that came with the software application for more information. 5.3.1 ASUS MyLogo™ The ASUS MyLogo™ utility lets you customize the boot logo. The boot logo [...]

5-10 Chapter 5: Software support 9. When the screen returns to the ASUS Update utility, ash the original BIOS to load the new boot logo. 10. After ashing the BIOS, restart the computer to display the new boot logo during POST. 8. Adjust the boot image to your desired size by selecting a value on the Ratio box. 7. When the logo images appear o[...]

ASUS P5LD2 5-11 3. Click the Run button to perform a cable test. 5.3.2 AI NET2 The AI NET2 features the Marvell ® Virtual Cable Tester™ (VCT). VCT is a cable diagnostic utility that reports LAN cable faults and shorts using the Time Domain Reectometry (TDR) technology. The VCT detects and reports open and shorted cables, impedance mismatches,[...]

5-12 Chapter 5: Software support 5.3.3 Audio congurations The Realtek ® ALC882 audio CODEC provides 8-channel audio capability to deliver the ultimate audio experience on your computer. The software provides Jack-Sensing function, S/PDIF Out support, and interrupt capability. The ALC882 also includes the Realtek ® proprietary UAJ ® (Universal[...]

ASUS P5LD2 5-13 Information Click the information button ( ) to display information about the audio driver version, DirectX version, audio controller, audio codec, and language setting. Minimize Click the minimize button ( ) to minimize the window. Exit Click the exit button ( ) to exit the Realtek HD Audio Manager. Conguration options Click any[...]

5-14 Chapter 5: Software support Sound Effect The Realtek ® ALC882 Audio CODEC allows you to set your listening environment, adjust the equalizer, set the karaoke, or select pre-programmed equalizer settings for your listening pleasure. To set the sound effect options: 1. From the Realtek HD Audio Manager, click the Sound Effect tab. 2. Click the [...]

ASUS P5LD2 5-15 Audio I/O The Audio I/O option allows you congure your input/output settings. To set the Audio I/O options: 1. From the Realtek HD Audio Manager, click the Audio I/O tab. 2. Click the drop-down menu to select the channel conguration. 3. The control settings window displays the status of connected devices. Click for analog and [...]

5-16 Chapter 5: Software support 3D Audio Demo The 3D Audio Demo option gives you a demonstration of the 3D audio feature. To start the 3D Audio Demo: 1. From the Realtek HD Audio Manager, click the 3D Audio Demo tab. 2. Click the option buttons to change the sound, moving path, or environment settings. 3. Click to test your settings. 4. Click to e[...]

ASUS P5LD2 5-17 If you want to boot the system from a hard disk drive included in a created RAID set, copy rst the RAID driver from the support CD to a oppy disk before you install an operating system to the selected hard disk drive. Refer to section “5.6 Creating a RAID driver disk” for details. 5.4 RAID congurations The motherboard c[...]

5-18 Chapter 5: Software support 5.4.2 Intel ® RAID congurations This motherboard supports RAID 0, RAID 1, RAID 5, RAID 10 (0+1), and Intel ® Matrix Storage congurations for Serial ATA hard disks drives through the Intel ® ICH7R Southbridge chip. Setting the RAID item in BIOS You must set the RAID item in the BIOS Setup before you can crea[...]

ASUS P5LD2 5-19 Intel ® Matrix Storage Manager Option ROM Utility The Intel ® Matrix Storage Manager Option ROM utility allows you to create RAID 0, RAID 1, RAID 10 (0+1), and RAID 5 set(s) from Serial ATA hard disk drives that are connected to the Serial ATA connectors supported by the Southbridge. To enter the Intel ® Application Accelerator R[...]

5-20 Chapter 5: Software support Creating a RAID 0 set (striped) To create a RAID 0 set: 1. From the utility main menu, select 1. Create RAID Volume, then press <Enter>. This screen appears. 2. Enter a name for the RAID 0 set, then press <Enter>. 3. When the RAID Level item is highlighted, press the up/down arrow key to select RAID 0 (S[...]

ASUS P5LD2 5-21 6. Use the up/down arrow key to select the stripe size for the RAID 0 array, then press <Enter>. The available stripe size values range from 4 KB to 128 KB. The default stripe size is 128 KB. TIP: We recommend a lower stripe size for server systems, and a higher stripe size for multimedia computer systems used mainly for audio[...]

5-22 Chapter 5: Software support Creating a RAID 1 set (mirrored) To create a RAID 1 set: 1. From the utility main menu, select 1. Create RAID Volume, then press <Enter>. This screen appears. 2. Enter a name for the RAID 1 set, then press <Enter>. 3. When the RAID Level item is highlighted, press the up/down arrow key to select RAID 1(M[...]

ASUS P5LD2 5-23 Creating a RAID 10 set (RAID 0+1) To create a RAID 10 set: 1. From the utility main menu, select 1. Create RAID Volume, then press <Enter>. This screen appears. Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5 Copyright(C) 2003-05 Intel Corporation. All Rights Reserved. [ CREATE ARRAY MENU ] [ DISK/VOLUME IN[...]

5-24 Chapter 5: Software support Creating a RAID 5 set (parity) To create a RAID 5 set: 1. From the utility main menu, select 1. Create RAID Volume, then press <Enter>. This screen appears. Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5 Copyright(C) 2003-05 Intel Corporation. All Rights Reserved. [ CREATE ARRAY MENU ] [ D[...]

ASUS P5LD2 5-25 4. The Disks item is highlighted, press <Enter> to select the hard disk drives to congure as RAID. The following pop-up screen appears. [ SELECT DISKS ] [ ↑↓ ]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete Port Drive Model Serial # Size Status 0 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk 1 XXXXXXXXXXXX XXXXXX[...]

5-26 Chapter 5: Software support Deleting a RAID set Take caution when deleting a RAID set. You will lose all data on the hard disk drives when you delete a RAID set. To delete a RAID set: 1. From the utility main menu, select 2. Delete RAID Volume, then press <Enter> to display this screen. 2. Use the up/down arrow key to select the RAID set[...]

ASUS P5LD2 5-27 Exiting the Intel ® Matrix Storage Manager utility To exit the utility: 1. From the utility main menu, select 4. Exit, then press <Enter>. This window appears. Are you sure you want to exit? (Y/N): [ CONFIRM EXIT ] 2. Press <Y> to exit or press <N> to return to the utility main menu. Resetting Disks to Non-RAID Ta[...]

5-28 Chapter 5: Software support Resetting a RAID set hard disks drive Take caut ion b efore you r eset a RAI D volu me HD D to non-RA ID. R esett ing a RA ID vo lume HDD de letes all inter nal RA ID st ructu re on the d rive. To reset a RAID set hard disk drive: 1. From the utility main menu, select [3. Reset Disks to Non-RAID], then press <Ent[...]

ASUS P5LD2 5-29 5.5 Creating a RAID driver disk A oppy disk with the RAID driver is required when installing Windows ® 2000/XP operating system on a hard disk drive that is included in a RAID set. You can create a RAID driver disk in DOS (using the Makedisk application in the support CD) or in Windows ® environment. To create a RAID driver dis[...]

5-30 Chapter 5: Software support To create a RAID driver disk in Windows ® environment: 1. Place the motherboard support CD in the optical drive. 2. When the Drivers menu appears, select the RAID driver disk you wish to create: • Click Make ICH7 32 bit RAID Driver Disk to create an Intel ® ICH7 RAID driver disk for a 32-bit system. • Click Ma[...]

A CPU features The Appendix describes the CPU features that the motherboard supports.[...]

ASUS P5LD2 Chapter summary A A.1 Intel ® EM64T ......................................................................... A-1 A.2 Enhanced Intel SpeedStep ® Technology (EIST) .................... A-1 A.3 Intel ® Hyper-Threading Technology ...................................... A-3[...]

ASUS P5LD2 A-1 A.1 Intel ® EM64T • The motherboard is fully compatible with Intel ® Pentium ® 4 LGA775 processors running on 32-bit operating systems. • The motherboard comes with a BIOS le that supports EM64T. You can download the latest BIOS le from the ASUS website (www.asus. com/support/download/) if you need to update the BIOS [...]

A-2 Appendix: CPU features A.2.2 Using the EIST To use the EIST feature: 1. Tu rn o n t he co mp ut er, t he n e nt er th e BI OS Se tup . 2. Go t o the A dva nc ed Me nu , h ig hl igh t CP U C on g ura ti on , then press <Enter>. 3. Set the Intel(R) SpeedStep Technology item to [Automatic], then press <Enter>. See page 4-26 for deta[...]

ASUS P5LD2 A-3 A.3 Intel ® Hyper-Threading Technology • The motherboard supports Intel ® Pentium ® 4 LGA775 processors with Hyper-Threading Technology. • Hy per -T hre adi ng Te chn ol ogy is s upp ort ed un de r W ind ow s ® XP and Linux 2.4.x (kernel) and later versions only. Under Linux, use the Hyper-Threading compiler to compile the co[...]

A-4 Appendix: CPU features[...]