Asus P5NT WS инструкция обслуживания

Motherboard P5NT WS[...]

ii E2945 First Edition V1 January 2007 Copyright © 2007 ASUST eK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the pur[...]

iii Contents Notices ........................................................................................................ vii Safety information .................................................................................... viii About this guide ......................................................................................... ix P[...]

iv Contents 2.5.5 PCI Express x1 slots ..................................................... 2-19 2.5.6 PCI-X slot ...................................................................... 2-19 2.5.7 PCI Express x16 slots ................................................... 2-19 2.6 Jumpers ..............................................................[...]

v Contents 4.3.4 Legacy Diskette A ......................................................... 4-14 4.3.5 Primary IDE Master/Slave ............................................. 4-15 4.3.6 S A T A 1 / 2 / 3/ 4 / 5/ 6 . . . .. . . .. . . .. . . .. . . .. . . .. . . .. . . .. . . . . . . . . . .. . . .. . . .. . . .. . . .. . . .. . . .. . . . . . . . .[...]

vi Contents 5.1 Installing an operating system ................................................... 5-1 5.2 Support DVD information ............................................................ 5-1 5.2.1 Running the Support DVD .............................................. 5-1 5.2.2 Drivers menu ......................................................[...]

vii Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has [...]

viii Safety information Electrical safety • T o prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect a[...]

ix About this guide This user guide contains the information you need when installing and conguring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports. • Chapter 2: Hardware informatio[...]

x Conventions used in this guide T o make sure that you perform certain tasks properly , take note of the following symbols used throughout this manual. T ypography Bold text Indicates a menu or an item to select. Italics Used to emphasize a word or a phrase. <Key> Key s encl osed i n the less- than a nd gre ater-t han s ign mea ns tha t you [...]

xi P5NT WS specications summary CPU LGA775 socket for Intel ® Core™2 Extreme / Core™2 Duo / Pentium ® Extreme / Pentium ® D / Pentium ® 4 / Celeron ® D Processors Intel ® Quad-core CPU Ready Compatible with Intel ® 06/05B/05A processors Note : Visit the ASUS website at www.asus.com for the Intel ® CPU support list. Chipset NVIDIA ® [...]

xii P5NT WS specications summary High Denition Audio Realtek ALC888 8-channel High Denition Audio CODEC - Supports Jack-Sensing, Multi-streaming and Jack-Retasking Coaxial, Optical S/PDIF out IEEE 1394 VIA6308S controller supports: - 2 x IEEE 1394a connectors USB Supports up to 10 USB 2.0/1.1 ports (6 at mid-board, 4 on the rear panel) ASU[...]

xiii P5NT WS specications summary Internal connectors 1 x Floppy disk drive connector 1 x IDE connector for 2 devices 6 x Serial A T A connectors 3 x USB 2.0 connectors support six additional USB 2.0 ports 1 x Serial port (COM) connector 1 x Chassis intrusion connector 1 x EZ Plug connector 1 x 24-pin A TX power connector 1 x 8-pin A TX 12V powe[...]

xiv[...]

1 Product introduction This chapter describes the motherboard features and the new technologies it supports.[...]

ASUS P5NT WS Chapter summary 1 1.1 Welcome! ...................................................................................... 1-1 1.2 Package contents ......................................................................... 1-1 1.3 Special features ............................................................................ 1-2[...]

ASUS P5NT WS 1-1 1.1 Welcome! Thank you for buying an ASUS ® P5NT WS motherboard! The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards! Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list b[...]

1-2 Chapter 1: Product Introduction 1.3 Special features 1.3.1 Product highlights Green ASUS This motherboard and its packaging comply with the European Union’s Restriction on the use of Hazardous Substances (RoHS). This is in line with the ASUS vision of creating environment-friendly and recyclable products/packaging to safeguard consumers’ he[...]

ASUS P5NT WS 1-3 Ser ial A T A II techn olo gy Th e m oth erb oa rd fu lly s up por ts the Serial A T A II 3.0 Gb/s technology through the Serial A T A interfaces and the NVIDIA ® chipset. The Serial A T A 3.0 Gb/s specication provides twice the bandwidth of the current Serial A T A products with a host of new features, including Native Command[...]

1-4 Chapter 1: Product Introduction 1.3.2 ASUS AI Lifestyle features ASUS has devoted special efforts to address the thermal issues across the motherboard, and most notably the areas that reside the CPU, power , Northbridge and Southbridge. Advanced thermal design Stack Cool 2 Stack Cool 2 is a fan-less and zero-noise cooling solution offered exclu[...]

ASUS P5NT WS 1-5 ASUS EZ DIY ASUS Q-Connector The ASUS Q-Connector allows you to connect or disconnect chassis front panel cables in one easy step with one complete module. This unique adapter eliminates the trouble of plugging in one cable at a time, making connection quick and accurate. See page 2-34 for details. ASUS CrashFree BIOS 2 The ASUS Cr[...]

1-6 Chapter 1: Product Introduction AI NOS™ Applications such as 3D games and video editing demand a huge chunk of system resource. Inject "nitrous oxide" into your CPU! The patented AI NOS™ (Non-delay Overclocking System) technology intelligently detects system load and automatically boosts performance for the most demanding tasks. U[...]

2 Hardware information This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers and connectors on the motherboard.[...]

ASUS P5NT WS Chapter summary 2 2.1 Before you proceed ..................................................................... 2-1 2.2 Motherboard overview ................................................................. 2-2 2.3 Central Processing Unit (CPU) ................................................... 2-7 2.4 System memory ...................[...]

ASUS P5NT WS 2-1 Onboard LED The motherboard comes with a standby power LED. The green LED lights up to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component. The illustration below shows the loca[...]

2-2 Chapter 2: Hardware information P5N T WS ® 2.2 Motherboard overview Before you install the motherboard, study the conguration of your chassis to ensure that the motherboard ts into it. Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so can cause you physical injury and damage motherboard co[...]

ASUS P5NT WS 2-3 2.2.3 ASUS Stack Cool 2 The motherboard comes with the ASUS Stack Cool 2 cooling solution that lowers the temperature of critical heat generating components. The motherboard uses a special design on the printed circuit board (PCB) to dissipate heat that critical components generate.[...]

2-4 Chapter 2: Hardware information 2.2.4 Motherboard layout Refer to 2.7 Connectors for more information about rear panel connectors and internal connectors. • The Antenna jack and the WiFi-AP Solo LED indicator are only for the WiFi edition. • The USB910 port does not exist for the WiFi edition. P ANEL P5 NT WS ® CHASSIS 24.5cm (9.6in) CPU_F[...]

ASUS P5NT WS 2-5 2.2.5 Layout contents Slots Page 1. DDR2 DIMM slots 2-14 2. PCI slot 2-19 3. PCI-X slot 2-19 4. PCI Express x1 slots 2-19 5. PCI Express x16 slots 2-19 Jumper Page 1. Clear RTC RAM (3-pin CLR TC_EN ) 2-20 2. PCI-X Speed setting (6-pin PCIX_SPEED) 2-21 Rear panel connectors Page 1. PS/2 mouse port (green) 2-22 2. Parallel port 2-22 [...]

2-6 Chapter 2: Hardware information Internal connectors Page 1. Floppy disk drive connector (34-1 pin FLOPPY) 2-24 2. IDE connector (40-1 pin PRI_IDE ) 2-25 3. Serial A T A connectors (7-pin SA T A1-6 ) 2-26 4. USB connectors (10-1 pin USB56, USB 78, USB910 ) 2-27 5. Internal audio connector (4-pin CD) 2-27 6. IEEE 1394a port connectors (10-1 pin I[...]

ASUS P5NT WS 2-7 2.3 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA775 socket designed for the Intel ® Quad-core / Core™2 Extreme / Core™2 Duo / Pentium ® Extreme / Pentium ® D/ Pentium ® 4 and Celeron ® D processors. • Upon purchase of the motherboard, make sure that the PnP cap is on the socket and the soc[...]

2-8 Chapter 2: Hardware information 3. Lift the load lever in the direction of the arrow to a 135º angle. 2. Press the load lever with your thumb (A), then move it to the left (B) until it is released from the retention tab. Retention tab Load lever This side of the socket box should face you. PnP cap A B T o prevent damage to the socket pins, do [...]

ASUS P5NT WS 2-9 5. Position the CPU over the socket, making sure that the gold triangle is on the bottom-left corner of the socket then t the socket alignment key into the CPU notch. Alignment key Gold triangle mark 6. Close the load plate (A), then push the load lever (B) until it snaps into the retention tab. 7. If installing a dual-core CPU,[...]

2-10 Chapter 2: Hardware information Fastener Motherboard hole 2.3.2 Installing the CPU heatsink and fan The Intel ® LGA775 processor requires a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance. T o install the CPU heatsink and fan: 1. Place the heatsink on top of the installed CPU, making sure that [...]

ASUS P5NT WS 2-1 1 3. Connect the CPU fan cable to the connector on the motherboard labeled CPU_F AN. 2. Push down two fasteners at a time in a diagonal sequence to secure the heatsink and fan assembly in place. B A A A B B Do not forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector . A B [...]

2-12 Chapter 2: Hardware information T o uninstall the CPU heatsink and fan: 1. Disconnect the CPU fan cable from the connector on the motherboard. 2. Rotate each fastener counterclockwise. 3. Pull up two fasteners at a time in a diagonal sequence to disengage the heatsink and fan assembly from the motherboard. B B A A A A B B 4. Carefully remove t[...]

ASUS P5NT WS 2-13 5. Rotate each fastener clockwise to ensure correct orientation when reinstalling. Narrow end of the groove Refer to the documentation in the boxed or stand-alone CPU fan package for detailed information on CPU fan installation. The narrow end of the groove should point outward after resetting. (The photo shows the groove shaded f[...]

2-14 Chapter 2: Hardware information 2.4 System memory 2.4.1 Overview The motherboard comes with four Double Data Rate 2 (DDR2) Dual Inline Memory Modules (DIMM) sockets. A DDR2 module has the same physical dimensions as a DDR DIMM but has a 240-pin footprint compared to the 184-pin DDR DIMM. DDR2 DIMMs are notched differently to prevent installati[...]

ASUS P5NT WS 2-15 2.4.2 Memory congurations Y ou may install 256 MB, 512 MB, 1 GB, and 2 GB unbuffered non-ECC DDR2 DIMMs into the DIMM sockets. • For dual-channel conguration, the total size of memory module(s) installed per channel must be the same (DIMM_A1 + DIMM_A2 = DIMM_B1 + DIMM_B2). • Always install DIMMs with the same CAS latency[...]

2-16 Chapter 2: Hardware information 2.4.3 Installing a DIMM Unplug the power supply before adding or removing DIMMs or other system components. Failure to do so can cause severe damage to both the motherboard and the components. T o install a DIMM: 1. Unlock a DIMM socket by pressing the retaining clips outward. 2. Align a DIMM on the socket such [...]

ASUS P5NT WS 2-17 2.5 Expansion slots In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support. 2.5.1 Installing an expansion card T o install an expansion card: 1. Before installing the expansion card, read the documentation that came with it and make the necess[...]

2-18 Chapter 2: Hardware information 2.5.3 Interrupt assignments IRQ assignments for this motherboard A B C D E F G H PCIEx16_1 – – – – shared – – – PCIEx16_2 – – – – – shared – – PCIEx16_3 – – – – shared – – – PCIEx1_1 – – – – – shared – – PCIEx1_2 shared – – – – – – – PCI Slot [...]

ASUS P5NT WS 2-19 2.5.4 PCI slot The PCI slot supports cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI specications. Refer to the gure below for the location of the slots. 2.5.5 PCI Express x1 slots This motherboard supports PCI Express x1 network cards, SCSI cards and other cards that comply with the PCI E[...]

2-20 Chapter 2: Hardware information 2.6 Jumpers 1. Clear RTC RAM (CLRTC) Y ou can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. T o erase the RTC RAM: 1. T urn OFF the computer and unplug the power cord. 2. Move the jumper cap from pins 1-2 (default) to pins 2-3 to enable the CLRTC function. 3. [...]

ASUS P5NT WS 2-21 P5NT WS ® P5NT WS PCI-X Speed setting PCIX_SPEED AUTO by PCI-X Card (Default) Force PCI-X 133MHz Force PCI-X 100MHz 1 1 1 2. PCI-X Speed setting (6-pin PCIX_SPEED) This jumper allows you to set the PCI-X slot’s maximum frequency capability . 1~2: the slots will have 133 MHZ capability whether you install one or two cards. 3~4: [...]

2-22 Chapter 2: Hardware information 13 4 6 15 1 18 2 17 16 14 3 5 7 8 1 1 12 10 9 2.7 Connectors 2.7.1 Rear panel connectors 1. PS/2 mouse port (green). This port is for a PS/2 mouse. 2. Parallel port. This 25-pin port connects a parallel printer , a scanner , or other devices. 3. LAN 1 (RJ-45) port. Supported by Marvell ® 88E1 1 16 Gigabit LAN c[...]

ASUS P5NT WS 2-23 9. Antenna jack (Only for WiFi edition). This port is on the onboard wireless LAN module that allows you to set up a wireless network and exchange information with other wireless devices without tangling cables and wires. Connect the moveable omni-directional antenna to this jack. 10. W IF I- AP So lo L ED i nd ic at or (O nl y fo[...]

2-24 Chapter 2: Hardware information 2.7.2 Internal connectors 1. Floppy disk drive connector (34-1 pin FLOPPY) This connector is for the provided oppy disk drive (FDD) signal cable. Insert one end of the cable to this connector , then connect the other end to the signal connector at the back of the oppy disk drive. Pin 5 on the connector is [...]

ASUS P5NT WS 2-25 P5NT WS ® P5NT WS IDE connector NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1. PRI_IDE 2. IDE connector (40-1 pin PRI_IDE) The onboard IDE connector is for the Ultra DMA 133/100/66 signal cable. There are three connectors on each Ultra DMA 133/100/66 signal cable: blue, black, and gray . Connect [...]

2-26 Chapter 2: Hardware information Connect the right-angle side of SA T A signal cable to the SA T A device, or connect the right-angle side of the SA T A cable to the onboard SA T A port to avoid mechanical conict with huge graphics cards. Right-angle side 3. Serial A T A connectors (7-pin SA T A1-6) These connectors are for the Serial A T A [...]

ASUS P5NT WS 2-27 4. USB connectors (10-1 pin USB56, USB78, USB910) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specication that supports up to 480 Mbps connection speed. Never[...]

2-28 Chapter 2: Hardware information 6. IEE E 1394 a port connector (10-1 pin IE1394_1; 10-1 pin IE1394_2) The connectors are for IEEE 1394a ports. Connect the IEEE 1394a module cable to any of the connectors, then install the module to a slot opening at the back of the system chassis. Never connect a USB cable to the IEEE 1394a connector . Doing s[...]

ASUS P5NT WS 2-29 8. CPU, chassis, and power connectors (4-pin CPU_F AN, 3-pin CHA_F AN1~4, 3-pin PWR_F AN) The fan con nec tor s sup port cool ing fans of 1A~2.2A (26.4 W max.) at +12V . Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector . DO NOT fo[...]

2-30 Chapter 2: Hardware information 10. ATX po wer co nn ec tor s (24-pin EA TXPWR, 2 x 4-pin A TX12V , 4-pin EZ_PLUG) These connectors are for A TX power supply plugs. The power supply plugs are designed to t these connectors in only one orientation. Find the proper orientation and push down rmly until the connectors completely t. 9. Cha[...]

ASUS P5NT WS 2-31 • For a fully congured system, we recommend that you use a power supply unit (PSU) that complies with A TX 12 V Specication 2.0 (or later version) and provides a minimum power of 550 W . • Do not forget to connect the 4-pin/8pin EA TX12V power plug; otherwise, the system will not boot. • Make sure to connect the EZ Plu[...]

2-32 Chapter 2: Hardware information 1 1. TPM co nne cto r (20-1 pin TPM) [Optional]) This connector supports a T rusted Platform Module (TPM) system, which can securely store keys, digital certicates, passwords, and data. A TPM system also helps enhance network security , protects digital identities, and ensures platform integrity . The TPM mod[...]

ASUS P5NT WS 2-33 • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect t he chassis power LED cable to this connector . The system power LED lights up when you turn on the system power , and blinks when the system is in sleep mode. • Hard disk drive activity LED (2-pin IDE_LED) This 2-pin connector is for th[...]

2-34 Chapter 2: Hardware information ASUS Q-Connector (system panel) Y ou can use the ASUS Q-Connector to connect/disconnect chassis front panel cables in a few steps. Refer to the instructions below to install the ASUS Q-Connector . 1. Connect the front panel cables to the ASUS Q-Connector . Refer to the labels on the Q-Connector to know the detai[...]

3 Powering up This chapter describes the power up sequence, the vocal POST messages, and ways of shutting down the system.[...]

ASUS P5NT WS Chapter summary 3 3.1 Starting up for the rst time ........................................................ 3-1 3.2 T urning off the computer ............................................................. 3-2[...]

ASUS P5NT WS 3-1 3.1 Starting up for the rst time 1. After making all the connections, replace the system case cover . 2. Be sure that all switches are off. 3. Connect the power cord to the power connector at the back of the system chassis. 4. Connect the power cord to a power outlet that is equipped with a surge protector . 5. T urn on the devi[...]

3-2 Chapter 3: Powering up 3.2 Turning off the computer 3.2.1 Using the OS shut down function If you are using Windows ® 2000: 1. Click the Start button then click Shut Down. 2. Make sure that the Shut Down option button is selected, then click the OK button to shut down the computer . 3. The power supply should turn off after Windows ® shuts dow[...]

4 BIOS setup This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.[...]

Chapter summary 4 ASUS P5NT WS 4.1 Managing and updating your BIOS ............................................ 4-1 4.2 BIOS setup program .................................................................... 4-9 4.3 Main menu .................................................................................. 4-13 4.4 Advanced menu ..................[...]

ASUS P5NT WS 4-1 4.1 Managing and updating your BIOS The following utilities allow you to manage and update the motherboard Basic Input/Output System (BIOS) setup. 1. ASUS Update (Updates the BIOS in Windows ® environment.) 2. ASUS EZ Flash 2 (Updates the BIOS in DOS using a oppy disk or a USB ash disk.) 3. Award BIOS Flash Utility (Updates [...]

4-2 Chapter 4: BIOS setup Quit all Windows ® applications before you update the BIOS using this utility . 3. Select the ASUS FTP site nearest you to avoid network trafc, or click Auto Select . Click Next . Updating the BIOS through the Internet T o update the BIOS through the Internet: 1. Launch the ASUS Update utility from the Windows ® deskt[...]

ASUS P5NT WS 4-3 Updating the BIOS through a BIOS le T o update the BIOS through a BIOS le: 1. Launch the ASUS Update utility from the Windows ® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate . The ASUS Update main window appears. 2. Select Update BIOS from a le option from the drop-down menu, then click[...]

4-4 Chapter 4: BIOS setup 4.1.2 Creating a bootable oppy disk 1. Do either one of the following to create a bootable oppy disk. DOS environment a. Insert a 1.44MB oppy disk into the drive. b. At the DOS prompt, type format A: / S then press <Enter>. Windows ® XP environment a. Insert a 1.44 MB oppy disk to the oppy disk drive.[...]

ASUS P5NT WS 4-5 T o update the BIOS using EZ Flash 2: 1. Visit the ASUS website (www .asus.com) to download the latest BIOS le for the motherboard. 2. Save the BIOS le to a oppy disk, then restart the system. 3. Y ou can launch the EZ Flash 2 by two methods. (1) Insert the oppy disk/USB ash disk that contains the BIOS le to the ?[...]

4-6 Chapter 4: BIOS setup 4.1.4 Updating the BIOS The Basic Input/Output System (BIOS) can be updated using the AwardBIOS Flash Utility . Follow these instructions to update the BIOS using this utility . 1. Download the latest BIOS le from the ASUS web site. Rename the le to P5NT -WS.BIN and save it to a oppy disk, CD ROM or a USB ash d[...]

ASUS P5NT WS 4-7 7. Press <N> when the utility prompts you to save the current BIOS le. The following screen appears. 8. The utility veries the BIOS le in the oppy disk, CD ROM or a USB ash disk and starts ashing the BIOS le. Do not turn off or reset the system during the ashing process! AwardBIOS Flash Utility for ASU[...]

4-8 Chapter 4: BIOS setup 4. The utility saves the current BIOS le to the oppy disk, then returns to the BIOS ashing process. 3. T ype a lename for the current BIOS le in the Save current BIOS as eld, then press <Enter>. T o save the current BIOS le using the AwardBIOS Flash Utility: 1. Follow steps 1 to 6 of the previous[...]

ASUS P5NT WS 4-9 4.1.6 ASUS CrashFree BIOS 2 utility The ASUS CrashFree BIOS 2 is an auto recovery tool that allows you to restore the BIOS le when it fails or gets corrupted during the updating process. Y ou can update a corrupted BIOS le using the motherboard support DVD or the oppy disk that contains the updated BIOS le. • Prepare [...]

4-10 Chapter 4: BIOS setup 4.2 BIOS setup program This motherboard supports a programmable Low-Pin Count (LPC) chip that you can update using the provided utility described in section “4.1 Managing and updating your BIOS.” Use the BIOS Setup program when you are installing a motherboard, reconguring your system, or prompted to“Run Setup.?[...]

ASUS P5NT WS 4-1 1 4.2.1 BIOS menu screen Select Menu Item Specic Help Change the day, month, year and century. Legend bar General help Menu bar Sub-menu items Conguration elds Menu items Phoenix-Award BIOS CMOS Setup Utility Main Advanced Power Boot Tools Exit F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults ESC: Exit →[...]

4-12 Chapter 4: BIOS setup 4.2.4 Menu items The highlighted item on the menu bar displays the specic items for that menu. For example, selecting Main shows the Main menu items. The other items (Advanced, Power , Boot, and Exit) on the menu bar have their respective menu items. 4.2.5 Sub-menu items A solid triangle before each item on any menu sc[...]

ASUS P5NT WS 4-13 4.2.7 Pop-up window Select a menu item then press <Enter> to display a pop-up window with the conguration options for that item. F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults ESC: Exit →← : Select Menu Enter: Select SubMenu F10: Save and Exit Phoenix-Award BIOS CMOS Setup Utility Main Advanced Powe[...]

4-14 Chapter 4: BIOS setup F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults ESC: Exit →← : Select Menu Enter: Select SubMenu F10: Save and Exit Phoenix-Award BIOS CMOS Setup Utility Main Advanced Power Boot Tools Exit Select Menu Item Specic Help Change the day, month, year and century. System Time 15 : 30 : 36 System Date S[...]

ASUS P5NT WS 4-15 4.3.5 Primary IDE Master/Slave While entering Setup, the BIOS automatically detects the presence of IDE devices. There is a separate sub-menu for each IDE device. Select a device item then press <Enter> to display the IDE device information. The BIOS automatically detects the values opposite the dimmed items (Capacity , Cyli[...]

4-16 Chapter 4: BIOS setup Capacity Displays the auto-detected hard disk capacity . This item is not congurable. Cylinder Shows the number of the hard disk cylinders. This item is not congurable. Head Shows the number of the hard disk read/write heads. This item is not congurable. Sector Shows the number of sectors per track. This item is [...]

ASUS P5NT WS 4-17 4.3.6 S A T A 1 / 2 / 3 / 4 / 5 / 6 While entering Setup, the BIOS automatically detects the presence of Serial A T A devices. There is a separate sub-menu for each SA T A device. Select a device item then press <Enter> to display the SA T A device information. The BIOS automatically detects the values opposite the dimmed it[...]

4-18 Chapter 4: BIOS setup Head Shows the number of the hard disk read/write heads. This item is not congurable. Landing Zone Shows the number of landing zone per track. This item is not congurable. Sector Shows the number of sectors per track. This item is not congurable. After entering the IDE hard disk drive information into BIOS, use a[...]

ASUS P5NT WS 4-19 4.4 Advanced menu The Advanced menu items allow you to change the settings for system devices. Phoenix-Award BIOS CMOS Setup Utility Main Advanced Power Boot Tools Exit Select Menu Item Specic Help Press [Enter] to set. JumperFree Conguration AI NET2 CPU Conguration Chipset PCIPnP Onboard Device Conguration USB Cong[...]

4-20 Chapter 4: BIOS setup Overclock Options [Disabled] Allows you to set the overclocking options. Conguration options: [Disabled] [Overclock 5%] [Overclock 10%] [Overclock 15%] [Overclock 20%] The following item becomes user-congurable when you set AI T uning to [AI N.O.S.] N.O.S. Mode [Auto] Allows you to set the Non-delay Overclocking Sys[...]

ASUS P5NT WS 4-21 Select Menu Item Specic Help Set C55 PCIE Overclock System Clocks NB PCIEX16 Frequency [Auto] SB PCIEX16 Frequency [Auto] SPP<->MCP Ref Clock, MHz [Auto] Phoenix-AwardBIOS CMOS Setup Utility Advanced System Clocks NB PCIEX16 Frequency/SB PCIEX16 Frequency [Auto] Allows you to set the NB/SB PCIEX16 overclocking frequency .[...]

4-22 Chapter 4: BIOS setup FSB (QDR), MHz [800] Use the numeric keypad to enter a new value or use the <+> and <-> keys to adjust the frequency . The values range from 533 to 3000. MEM (DDR), MHz [667] Use the numeric keypad to enter a new value or use the <+> and <-> keys to adjust the frequency . The values range from 400 [...]

ASUS P5NT WS 4-23 POST Check LAN Cable [Disabled] POST Check LAN2 Cable [Disabled] Enables or disables checking of the LAN/LAN2 cable during the Power-On Self-T est (POST). Configuration options: [Disabled] [Enabled] 4.4.3 CPU Conguration This sub-menu allows you to adjust the CPU-related items. Select an item, then press <Enter> to edit. [...]

4-24 Chapter 4: BIOS setup Limit CPUID MaxV al [Disabled] Conguration options: [Disabled] [Enabled] Hyper-Threading T echnology [Enabled] Conguration options: [Disabled] [Enabled] The following item appears only when you installed an Intel ® Pentium ® 4 CPU that supports the Enhanced Intel SpeedStep ® T echnology (EIST). Intel(R) SpeedStep[...]

ASUS P5NT WS 4-25 Memory Timing Setting F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults ESC: Exit →← : Select Menu Enter: Select SubMenu F10: Save and Exit Select Menu Item Specic Help Phoenix-AwardBIOS CMOS Setup Utility Advanced Memory Timing Setting tCL (CAS Latency) [Auto] tRCD [Auto] tRP [Auto] tRAS [Auto] Command Per [...]

4-26 Chapter 4: BIOS setup Async Latency [Auto] Conguration options: [Auto] [1.00nS] [1.25nS] [1.50nS] [1.75nS] [2.00nS] [2.25nS] [2.50nS] SLI Broadcast Aperture [Disabled] Conguration options: [Auto] [Disabled] LDT Frequency [5x] Conguration options: [1x] [2x] [3x]...[8x] NVIDIA GPU Ex [Disabled] Enables or disables the NVIDIA ® GPU Ex f[...]

ASUS P5NT WS 4-27 Select Menu Item Specic Help Select Yes if you are using a Plug and Play capable operating system. Select No if you need the BIOS to congure non-boot devices. PCIPnP Plug & Play O/S [No] Primary Display Adapter [PCI] Phoenix-Award BIOS CMOS Setup Utility Advanced 4.4.5 PCIPnP Plug & Play O/S [No] When set to [No], th[...]

4-28 Chapter 4: BIOS setup F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults ESC: Exit →← : Select Menu Enter: Select SubMenu F10: Save and Exit Select Menu Item Specic Help Onboard Device Conguration IDE Function Setup Serial-ATA Conguration HD Audio [Auto] Front Panel Support Type [AC97] Onboard 1st nVidia LAN [Enable[...]

ASUS P5NT WS 4-29 Serial-A T A Conguration This sub-menu allows you to change Serial A T A settings. Select an item then press <Enter> to edit. Select Menu Item Specic Help Phoenix-Award BIOS CMOS Setup Utility Advanced Serial-ATA Conguration Serial-ATA Controller [Enabled] RAID Enabled [Disabled] x SATA1 RAID Disabled x SATA2 RAID D[...]

4-30 Chapter 4: BIOS setup Silicon SA T AII Controller [Enabled] Allows you to disable or enable the function of the extended SA T AII controller . Conguration options: [Disabled] [Enabled] Silicon SA T AII option ROM [Disabled] Allows you to disable or enable the extended SA T AII option ROM. Conguration options: [Disabled] [Enabled] Onboard[...]

ASUS P5NT WS 4-31 4.5 Power menu The Power menu items allow you to change the settings for the Advanced Conguration and Power Interface (ACPI) and the Advanced Power Management (APM). Select an item then press <Enter> to display the conguration options. 4.5.1 ACPI Suspend T ype [S1&S3] Allows you to select the Advanced Conguratio[...]

4-32 Chapter 4: BIOS setup 4.5.3 APM Conguration Restore on AC Power Loss [Power-Off] Allows you to enable or disable the Restore on AC Power Loss function. Conguration options: [Power-Off] [Power-On] PWR Button < 4 secs [Instant-Off] Allows you to set the event after the power button is pressed for more than 4 seconds. Conguration opti[...]

ASUS P5NT WS 4-33 Alarm Time (hh:mm:ss) [ X: X: X] T o set the time of alarm: 1. Highlight this item and press <Enter> to display a pop-up menu for the hour eld. 2. Key-in a value (Min=0, Max=23), then press <Enter>. 3. Press <T AB> to move to the minutes eld then press <Enter>. 4. Key-in a minute value (Min=0, Max=59)[...]

4-34 Chapter 4: BIOS setup V oltage Monitor Select Menu Item Specic Help Press [Enter] to set. Phoenix-Award BIOS CMOS Setup Utility Power F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults ESC: Exit →← : Select Menu Enter: Select SubMenu F10: Save and Exit Voltage Monitor CPU_FAN Type [PWM Mode] Vcore Voltage [ 1.31V] 3.3V Vo[...]

ASUS P5NT WS 4-35 CPU Fan Speed warning [600 RPM] Allows you to set the CPU fan warning speed function, which gives off a warning when the CPU fan speed is too low . If you set this item to [Disabled], the system will not warn you even if no fan is installed or if the fan is not functioning properly . Conguration options: [Disabled] [600 RPM] [1[...]

4-36 Chapter 4: BIOS setup 4.6 Boot menu The Boot menu items allow you to change the system boot options. Select an item then press <Enter> to display the sub-menu. Phoenix-Award BIOS CMOS Setup Utility Main Advanced Power Boot Tools Exit Select Menu Item Specic Help Select Boot Device Priority Boot Device Priority Removable Drives Hard Di[...]

ASUS P5NT WS 4-37 4.6.2 Removable Drives 1. Floppy Disks Allows you to assign a removable drive attached to the system. Select Menu Item Specic Help Removable Drives 1. Floppy Disks Phoenix-Award BIOS CMOS Setup Utility Boot 4.6.3 Hard Disk Drives 1. SA T A X: XXXXXXXXX Allows you to assign hard disk drives attached to the system. Select Menu It[...]

4-38 Chapter 4: BIOS setup 4.6.4 Boot Settings Conguration F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults ESC: Exit →← : Select Menu Enter: Select SubMenu F10: Save and Exit Select Menu Item Specic Help Press [Enter] to enable or disable. Boot Settings Conguration Case Open Warning [Enabled] Quick Boot [Enabled] Boot[...]

ASUS P5NT WS 4-39 T ypematic Rate (Chars/Sec) [6] Allows you to select the rate at which a character repeats when you hold a key . Conguration options: [6] [8] [10] [12] [15] [20] [24] [30] T ypematic Delay (Msec) [250] Allows you to set the delay before keystrokes begin to repeat. Conguration options: [250] [500] [750] [1000] OS Select for D[...]

4-40 Chapter 4: BIOS setup 3. When prompted, conrm the password by typing the exact characters again, then press <Enter>. The password eld setting is changed to Set. T o clear the password: 1. Select the password eld and press <Enter> twice. The following message appears: PASSWORD DISABLED !!! Press any key to continue... 2. Pr[...]

ASUS P5NT WS 4-41 The succeeding items become user-congurable when you enable the ASUS Music Alarm. 4.7 Tools menu The T ools menu items allow you to congure options for special functions. Select an item then press <Enter> to display the sub-menu. Select Menu Item Specic Help ASUS Music Alarm ASUS O.C. Prole ASUS EZ Flash 2 F1:Hel[...]

4-42 Chapter 4: BIOS setup 4.7.2 ASUS O.C. Prole This item allows you to store or load multiple BIOS settings. Select Menu Item Specic Help Press [Enter] to select. ASUS BIOS Prole Load BIOS Prole Save BIOS Prole Phoenix-Award BIOS CMOS Setup Utility Tools Select Menu Item Specic Help Load BIOS Prole from Prole 1. Load BIOS [...]

ASUS P5NT WS 4-43 Load from Prole 1/2 Allows you to load the previous BIOS settings saved in the BIOS Flash. Press <Enter> to load the le. Load from File Allows you to load the previous BIOS le saved in the hard disk/oppy disk/USB ash disk with the F A T32/16/12 format. Follow the instructions below to load the BIOS le. 1. I[...]

4-44 Chapter 4: BIOS setup 4.7.3 ASUS EZ Flash 2 Allows you to run ASUS EZ Flash 2. When you press <Enter>, a conrmation message appears. Use the left/right arrow key to select between [Y es] or [No], then press <Enter> to conrm your choice. ASUSTek O.C. Prole Utility B318 BOARD: P5NT WS VER: 0111 DATE: 11/30/2006 Current CMOS [...]

ASUS P5NT WS 4-45 4.8 Exit menu The Exit menu items allow you to load the optimal or failsafe default values for the BIOS items, and save or discard your changes to the BIOS items. Exit & Save Changes Once you are nished making your selections, choose this option from the Exit menu to ensure the values you selected are saved to the CMOS RAM.[...]

4-46 Chapter 4: BIOS setup[...]

5 Software support This chapter describes the contents of the support DVD that comes with the motherboard package.[...]

ASUS P5NT WS Chapter summary 5 5.1 Installing an operating system ................................................... 5-1 5.2 Support DVD information ............................................................ 5-1 5.3 Software information ................................................................... 5-9 5.4 RAID congurations .............[...]

ASUS P5NT WS 5-1 If Autorun is NOT enabled in your computer , browse the contents of the Support DVD to locate the le ASSETUP .EXE from the BIN folder . Double-click the ASSETUP .EXE to run the DVD. 5.1 Installing an operating system This motherboard supports Windows ® 2000/2003 Server/XP/64-bit XP/Vista operating systems (OS). Always install t[...]

5-2 Chapter 5: Software support 5.2.2 Drivers menu The drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices. ASUS InstAll - Installation Wizard for Drivers Launches the ASUS InstAll driver installation wizard. Nvidia nForce Chipset Driver Installs the NVIDIA ?[...]

ASUS P5NT WS 5-3 5.2.3 Utilities menu The Utilities menu shows the applications and other software that the motherboard supports. ASUS InstAll - Installation Wizard for Utilities Launches the ASUS InstAll utilities installation wizard. ASUS PC Probe II This smart utility monitors the fan speed, CPU temperature, and system voltages, and alerts you o[...]

5-4 Chapter 5: Software support ADOBE Acrobat Reader V7.0 Installs the Adobe ® Acrobat ® Reader that allows you to open, view , and print documents in Portable Document Format (PDF). Microsoft DirectX 9.0c Installs the Microsoft ® DirectX 9.0c driver . The Microsoft DirectX ® 9.0c is a multimedia technology that enhances computer graphics and s[...]

ASUS P5NT WS 5-5 5.2.4 Make Disk menu The Make Disk menu contains items to create the NVIDIA ® SA T A RAID driver disk. NVIDIA 32bit 2000/2003/XP/Vista SA T A RAID Driver NVIDIA 64bit 2003/XP/Vista SA T A RAID Driver Allows you to create an NVIDIA ® Serial A T A RAID driver disk for a 32-bit/64-bit system. Sil3531 32bit 2K/XP/2003/Vista SA T A Dr[...]

5-6 Chapter 5: Software support 5.2.6 ASUS Contact information Click the Contact tab to display the ASUS contact information. Y ou can also nd this information on the inside front cover of this user guide. 5.2.5 Manuals menu The Manuals menu contains a list of supplementary user manuals. Click an item to open the folder of the user manual. Most [...]

ASUS P5NT WS 5-7 5.2.7 Other information The icons on the top right corner of the screen give additional information on the motherboard and the contents of the Support DVD. Click an icon to display the specied information. Motherboard Info Displays the general specications of the motherboard. Browse this DVD Displays the Support DVD contents [...]

5-8 Chapter 5: Software support Filelist Displays the contents of the Support DVD and a brief description of each in text format. T echnical support form Displays the ASUS T echnical Support Request Form that you have to ll out when requesting technical support.[...]

ASUS P5NT WS 5-9 5.3 Software information Most of the applications in the Support DVD have wizards that will conveniently guide you through the installation. View the online help or readme le that came with the software application for more information. 5.3.1 ASUS MyLogo2™ The ASUS MyLogo2™ utility lets you customize the boot logo. The boot [...]

5-10 Chapter 5: Software support 9. When the screen returns to the ASUS Update utility , ash the original BIOS to load the new boot logo. 10. After ashing the BIOS, restart the computer to display the new boot logo during POST . 8. Adjust the boot image to your desired size by selecting a value on the Ratio box. 7. When the logo images appear[...]

ASUS P5NT WS 5-1 1 5.3.2 Audio congurations The Realtek ® ALC888 audio CODEC provides 8-channel audio capability to deliver the ultimate audio experience on your computer . The software provides Jack- Sensing function, S/PDIF Out support, and interrupt capability . The ALC888 also includes the Realtek® proprietary UAJ® (Universal Audio Jack) [...]

5-12 Chapter 5: Software support Information Click the information button ( ) to display information about the audio driver version, DirectX version, audio controller , audio codec, and language setting. Minimize Click the minimize button ( ) to minimize the window . Exit Click the exit button ( ) to exit the Realtek HD Audio Manager . Congurati[...]

ASUS P5NT WS 5-13 Sound Effect The Realtek ® ALC888 Audio CODEC allows you to set your listening environment, adjust the equalizer , set the karaoke, or select pre-programmed equalizer settings for your listening pleasure. T o set the sound effect options: 1. From the Realtek HD Audio Manager , click the Sound Effect tab. 2. Click the shortcut but[...]

5-14 Chapter 5: Software support Audio I/O The Audio I/O option allows you congure your input/output settings. T o set the Audio I/O options: 1. From the Realtek HD Audio Manager , click the Audio I/O tab. 2. Click the drop-down menu to select the channel conguration. 3. The con trol set tings window d isplays the status of connected devices.[...]

ASUS P5NT WS 5-15 3D Audio Demo The 3D Audio Demo option gives you a demonstration of the 3D audio feature. T o start the 3D Audio Demo: 1. From the Realtek HD Audio Manager , click the 3D Audio Demo tab. 2. Click the option buttons to change the sound, moving path, or environment settings. 3. Click to test your settings. 4. Click to effect the 3D [...]

5-16 Chapter 5: Software support 5.3.3 ASUS PC Probe II PC Probe II is a utility that monitors the computer’s vital components, and detects and alerts you of any problem with these components. PC Probe II senses fan rotations, CPU temperature, and system voltages, among others. Because PC Probe II is software-based, you can start monitoring your [...]

ASUS P5NT WS 5-17 Button Function Opens the Conguration window Opens the Report window Opens the Desktop Management Interface window Opens the Peripheral Component Interconnect window Opens the Windows Management Instrumentation window Opens the hard disk drive, memory , CPU usage window Shows/Hides the Preference section Minimizes the applicati[...]

5-18 Chapter 5: Software support Changing the monitor panels position T o change the position of the monitor panels in the desktop, click the arrow down button of the Scheme options, then select another position from the list box. Click OK when nished. Moving the monitor panels All monitor panels move together using a magnetic effect. If you wan[...]

ASUS P5NT WS 5-19 Monitoring sensor alert The monitor panel turns red when a component value exceeds or is lower than the threshold value. Refer to the illustrations below . Large display Small display WMI browser Click to display the WMI (Windows Management Instrumentation) browser . This browser displays various Windows® management information. [...]

5-20 Chapter 5: Software support PCI browser Click to display the PCI (Peripheral Component Interconnect) browser . This browser provides information on the PCI devices installed on your system. Click the plus sign (+) before the PCI Information item to display available information. Usage The Usage browser displays real-time information on the CPU[...]

ASUS P5NT WS 5-21 Memory usage The Memory tab shows both used and available physical memory . The pie chart at the bottom of the window represents the used (blue) and the available Conguring PC Probe II Click to view and adjust the sensor threshold values. The Cong window has two tabs: Sensor/Threshold and Preference. The Sensor/ Threshold ta[...]

5-22 Chapter 5: Software support 5.3.4 ASUS Music Alarm This motherboard is equipped with an audio alarm clock called ASUS Music Alarm. The ASUS Music Alarm gives you a personal wake-up called with your favorite CD music when the system is off. The onboard audio CODEC supports this feature, which requires an optical drive (CD-ROM, CD-RW , or DVD-RO[...]

ASUS P5NT WS 5-23 OS conguration T o congure ASUS Music Alarm in Windows ® 1. Place the Support DVD into the optical drive. 2. Click the Utilities tab and choose ASUS Music Alarm to install the utility . 3. Insert an audio CD into the optical drive. 4. Launch the ASUS Music Alarm application by going to Start > ASUS > ASUS Music Alarm [...]

5-24 Chapter 5: Software support 7. Click the arrow ( ) next to Options in the Options section. The Options panel appears. Disable or select the Repeat mode, then specify the length of the alarm music to play . Set the desired volume. When done, click OK . 8. After you have nished making all the required settings, turn off the system. Adjusting [...]

ASUS P5NT WS 5-25 5.3.5 ASUS AI Suite ASUS AI Suite allows you to launch AI Gear , AI N.O.S., AI Booster , AI Nap, and Q-Fan utilities easily . Installing AI Suite T o install AI Suite on your computer: 1. Place the support DVD to the optical drive. The Drivers installation tab appears if your computer has an enabled Autorun feature. 2. Click the U[...]

5-26 Chapter 5: Software support Other feature buttons Click on right corner of the main window to open the monitor window . Click on right corner of the expanded window to switch the temperature from degrees Centigrade to degrees Fahrenheit. Displays the CPU/ system temperature, CPU/memory/PCIE voltage, and CPU/ chassis fan speed Displays the FSB/[...]

ASUS P5NT WS 5-27 5.3.6 ASUS AI Gear ASUS AI Gear provides four system performance options that allows you to select the best performance setting for your computing needs. This easy-to-use utility adjusts the processor frequency and vCore voltage to minimize system noise and power consumption. After installing AI Suite from the bundled support DVD,[...]

5-28 Chapter 5: Software support 5.3.7 ASUS AI Nap This feature allows you to minimize the power consumption of your computer whenever you are away . Enable this feature for minimum power consumption and a more quiet system operation. After installing AI Suite from the bundled support DVD, you can launch the utility by double-clicking the AI Suite [...]

ASUS P5NT WS 5-29 5.3.8 ASUS AI N.O.S. This ASUS Non-delay Overclocking System feature intelligently determines the system load and automatically boosts the performance for the most demanding tasks. After installing AI Suite from the bundled support DVD, you can launch the utility by double-clicking the AI Suite icon on the Windows OS taskbar and c[...]

5-30 Chapter 5: Software support 5.3.9 ASUS Q-Fan This ASUS Q-Fan Control feature allows you to set the appropriate performance level of the CPU Q-Fan or the Chassis Q-Fan for more efcient system operation. After enabling the Q-Fan function, the fans can be set to automatically adjust depending on the temperature, to decrease fan speed, or to ac[...]

ASUS P5NT WS 5-31 5.3.10 ASUS AI Booster The ASUS AI Booster application allows you to overclock the CPU speed in WIndows ® environment without the hassle of booting the BIOS. After installing AI Suite from the bundled support DVD, you can launch the utility by double-clicking the AI Suite icon on the Windows ® OS taskbar and click the AI Booster[...]

5-32 Chapter 5: Software support 5.4 RAID congurations The motherboard comes with two RAID controllers that allow you to congure Serial A T A hard disk drives as RAID sets. • The NVIDIA ® Southbridge includes a high performance SA T A RAID controller that supports RAID 0, RAID 1, RAID 0+1, RAID 5 and JBOD for six independent Serial A T A c[...]

ASUS P5NT WS 5-33 If you want to boot the system from a hard disk drive included in a RAID set, rst copy the RAID driver from the Support DVD to a oppy disk before you install an operating system to a selected hard disk drive. Refer to section “5.5 Creating a RAID driver disk” for details. Setting the BIOS RAID items After installing the [...]

5-34 Chapter 5: Software support • For detailed descriptions on the NVIDIA ® RAID conguration, refer to the “NVIDIA ® RAID User Guide” found in your motherboard Support DVD. • When using Windows ® 2000 operating system, make sure to install the Windows ® 2000 Service Pack 4 or later version. Make sure to re-enter your NVRAID settings[...]

ASUS P5NT WS 5-35 Creating a RAID V olume T o create a RAID volume: 1. From the NVIDIA ® RAID utility Dene a New Array menu, select RAID Mode then press <Enter>. The following submenu appears. Use the up or down arrow keys to select a RAID mode then press <Enter>. Mirroring Striping Stripe Mirroring Spanning TIP: For server systems,[...]

5-36 Chapter 5: Software support Rebuilding a RAID array T o rebuild a RAID array: 1. From the Array List menu, use the up or down arrow keys to select a RAID array then press <Enter>. The RAID Array details appear . [Ctrl-X]Exit [ ↑↓ ]Select [B]Set Boot [N]New Array [ENTER]Detail NVIDIA RAID Utility Oct 5 2004 - Array List - Boot Id Stat[...]

ASUS P5NT WS 5-37 A new set of navigation keys is displayed on the bottom of the screen. 2. Press <R> to rebuild a RAID array . The following screen appears. 3. Use the up or down arrow keys to select a RAID array to rebuild, then press <F7>. The following conrmation message appears. [ ↑↓ ] Select [F6] Back [F7] Finish Array 1 : [...]

5-38 Chapter 5: Software support Deleting a RAID array T o delete a RAID array: 1. From the Array List menu, use the up or down arrow keys to select a RAID array then press <Enter>. The RAID Array details appear . [R] Rebuild [D] Delete [C] Clear Disk [ENTER] Return Array 1 : NVIDIA MIRROR XXX.XXG - Array Detail - RAID Mode: Mirroring Stripin[...]

ASUS P5NT WS 5-39 Clearing a disk data T o clear disk data: 1. From the Array List menu, use the up or down arrow keys to select a RAID array then press <Enter>. The RAID Array details appear . [R] Rebuild [D] Delete [C] Clear Disk [ENTER] Return Array 1 : NVIDIA MIRROR XXX.XXG - Array Detail - RAID Mode: Mirroring Striping Width: 1 Striping [...]

5-40 Chapter 5: Software support 5.5 Creating a RAID driver disk A oppy disk with the RAID driver is required when installing Windows ® 2000/XP operating system on a hard disk drive that is included in a RAID set. T o create a RAID driver disk: 1. Place the motherboard support DVD into the CD-ROM drive. 2. Select Make Disk tab. 3. From the Make[...]

6 This chapter tells how to install PCI Express graphics cards. NVIDIA ® dual gr aphi cs tec hno lo gy support[...]

ASUS P5NT WS Chapter summary 6.1 Overview ....................................................................................... 6-1 6.2 Dual graphics cards setup .......................................................... 6-2[...]

ASUS P5NT WS 6-1 6.1 Overview The motherboard supports the NVIDIA ® dual graphics technology that allows you to install two identical PCI Express™ x16 graphics cards. Follow the installation procedures in this section. Requirements • Y ou should have two identical graphics cards that are NVIDIA ® certied. • Make sure that your graphics c[...]

6-2 Chapter 6: NVIDIA ® dual graphics technology support 6.2 Dual graphics card setup 6.2.1 Installing dual graphics cards Install only identical graphics cards that are NVIDIA ® -certied. Different types of graphics cards will not work together properly . T o install the graphics cards: 1. Prepare two graphics cards. Each graphics card should[...]

ASUS P5NT WS 6-3 4. Insert the second graphics card into the other slot (PCIEX16_3). Make sure that the card is properly seated on the slot. If required, connect an auxiliary power source to the PCI Express graphics cards. 3. Insert one graphics card into one of the blue slots (PCIEX16_1). Make sure that the card is properly seated on the slot.[...]

6-4 Chapter 6: NVIDIA ® dual graphics technology support 7. Connect a VGA cable or a DVI-I cable to the graphics card/s. We recommend to install an additional chassis fan for better thermal environment. 5. Align and insert the connector to the goldngers on each graphics card. Make sure that the connector is rmly in place. 6. When installing [...]

ASUS P5NT WS 6-5 NVIDIA Settings icon T o enable the multi-GPU feature: 1. Click the NVIDIA Settings icon on your Windows taskbar . 2. From the pop-up menu, select nView Desktop Manager then click nView Properties. Make sure that your PCI Express graphics card driver supports t he NVIDIA dual graphics technology . Download the latest driver from th[...]

6-6 Chapter 6: NVIDIA ® dual graphics technology support 5. From the Display Properties dialog box, select the Settings tab then click Advanced. 6. Select the NVIDIA GeForce tab. 7. Click the slider to display the following screen, then select the SLI multi-GPU item. 8. Click the Enable SLI multi-GPU check box. 9. Click OK when done. Slider[...]