Asus P8B75-M инструкция обслуживания

Motherboard P8B75-M[...]

ii E7142 First Edition (V1) February 2012 Copyright © 2012 ASUST eK Computer Inc. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the [...]

iii Contents Safety information ...................................................................................... vi About this guide ......................................................................................... vi P8B75-M specications summary ........................................................... viii Chapter 1: Product in[...]

iv Contents 1.13 Software support ........................................................................ 1-33 1.13.1 Installing an operating system ...................................... 1-33 1.13.2 Support DVD information .............................................. 1-33 1.13.3 Intel ® SBA support .............................................[...]

v Contents 2.5.5 System Agent Conguration ......................................... 2-18 2.5.6 ME Subsystem .............................................................. 2-18 2.5.7 AMT Conguration ........................................................ 2-19 2.5.8 USB Conguration ........................................................ 2-[...]

vi Safety information Electrical safety • T o prevent electric shock hazard, disconnect the power cable from the electric outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all pow[...]

vii Conventions used in this guide T o ensure that you perform certain tasks properly , take note of the following symbols used throughout this manual. DANGER/W ARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. NOTE: T ips and ad[...]

viii P8B75-M specications summary (continued on the next page) CPU LGA1 155 socket for Intel ® 3rd/2nd Generation Core™ i7 / Core™ i5 / Core™ i3 / Pentium ® / Celeron ® processors Supports Intel 22/32nm CPU Supports Intel ® T urbo Boost T echnology 2.0 * The Intel ® T urbo Boost T echnology 2.0 support depends on the CPU types. ** Ref[...]

ix P8B75-M specications summary ASUS unique features ASUS Exclusive Features: - ASUS EPU - GPU Boost - Network iControl featuring instant network bandwidth domination for top network program in use - ASUS USB 3.0 Boost - MemOK! - ASUS AI Suite II - Ai Charger - ASUS Anti-Surge Protection - ASUS UEFI BIOS featuring graphics user interface ASUS Qu[...]

x * Specications are subject to change without notice. BIOS features 128 Mb Flash ROM, UEFI BIOS, PnP , DMI v2.0, WfM 2.0, ACPI v2.0a, SM BIOS v2.5, Multi-language BIOS, ASUS CrashFree BIOS 3, ASUS EZ Flash 2, F12 PrintScreen function, F3 Shortcut function, and ASUS DRAM SPD (Serial Presence Detect) memory information Manageability WfM 2.0, DMI [...]

1-1 Chapter 1: Product introduction Chapter 1 Product introduction Motherboard ASUS P8B75-M motherboard Cables 1 x Serial A T A 6.0Gb/s cable 1 x Serial A T A 3.0Gb/s cable Accessories 1 x I/O shield Application DVD ASUS motherboard support DVD Documentation User Manual If any of the above items is damaged or missing, contact your retailer . 1.3 Sp[...]

ASUS P8B75-M 1-2 Intel ® B75 Express Chipset The Intel ® B75 Express Chipset is a single-chipset designed to support the 1 155 socket Intel ® 3rd/2nd generation Core™ i7 / i5 / i3 / Pentium ® / Celeron ® processors. It provides improved performance by utilizing serial point-to-point links, allowing increased bandwidth and stability . Additio[...]

1-3 Chapter 1: Product introduction 1.3.2 Innovative ASUS features ASUS UEFI BIOS Flexible and Easy BIOS Interface ASUS UEFI BIOS offers the rst mouse-controlled graphical BIOS designed with selectable modes, providing a user-friendly interface that goes beyond the traditional keyboard-only controls. It also natively supports fully-utilized hard[...]

ASUS P8B75-M 1-4 MemOK! MemOK! quickly ensures memory boot compatibility . This remarkable memory rescue tool requires a mere push of the button to patch memory issues. MemOK! determines failsafe settings and dramatically improves your system boot success. Get your system up and running in no time. AI Suite II With its fast user-friendly interface,[...]

1-5 Chapter 1: Product introduction 1.4 Before you proceed T ake note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or[...]

ASUS P8B75-M 1-6 P8B75-M 1.5 Motherboard overview Before you install the motherboard, study the conguration of your chassis to ensure that the motherboard ts into it. Ensure that you unplug the power cord before installing or removing the motherboard. Failure to do so can cause you physical injury and damage motherboard components. 1.5.1 Plac[...]

1-7 Chapter 1: Product introduction 1.5.3 Motherboard layout 1.5.4 Layout contents Connectors/Jumpers/Slots/LED Pa ge Connectors/Jumpers/Slots/LED Page 1. CPU and chassis fan connectors (4-pin CPU_F AN, 3-pin CHA_FAN1/2) 1-26 12. Speaker connector (4-pin SPEAKER) 1-27 2. A TX power connectors (24-pin EA TXPWR, 4-pin A TX12V) 1-25 13. USB 2.0 connec[...]

ASUS P8B75-M 1-8 1.6 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA1 155 socket designed for the Intel ® 3rd/2nd Generation Core™ i7 / Core™ i5 / Core™ i3 / Pentium ® / Celeron ® processors. Unplug all power cables before installing the CPU. • Upon purchase of the motherboard, ensure that the PnP cap is on t[...]

1-9 Chapter 1: Product introduction 1.6.1 Installing the CPU 1 2 3 The LGA1 156 CPU is incompatible with the LGA1 155 socket. DO NOT install a LGA1 156 CPU on the LGA1 155 socket. A B[...]

ASUS P8B75-M 1-10 A B C 5 4[...]

1-1 1 Chapter 1: Product introduction 1.6.2 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary . T o install the CPU heatsink and fan assembly 2 B A A B 3 1 4[...]

ASUS P8B75-M 1-12 A B B A T o uninstall the CPU heatsink and fan assembly 2 1[...]

1-13 Chapter 1: Product introduction P8B75-M P8B75-M 240-pin DDR3 DIMM sockets DIMM_A1 DIMM_A2 DIMM_B1 DIMM_B2 1.7 System memory 1.7.1 Overview The motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Modules (DIMM) sockets. A DDR3 module has the same physical dimensions as a DDR2 DIMM but is notched differently to prevent insta[...]

ASUS P8B75-M 1-14 P8B75-M Motherboard Qualied V endors Lists (QVL) DDR3-1600 MHz capability V endors Part No. Size SS/ DS Chip Brand Chip NO. Timing V oltage DIMM socket support (Optional) 1 DIMM 2 DIMMs 4 DIMMs A-DA TA AM2U16BC2P1 2GB SS A-DA TA 3CCD-1509A EL1 126T - - • • • A-DA TA AD31600E001GM(O)U3K 3GB(3 x 1GB) SS - - 8-8-8-24 1.65V -[...]

1-15 Chapter 1: Product introduction (continued on the next page) DDR3-1333 MHz capability V endors Part No. Size SS/ DS Chip Brand Chip NO. Timing V oltage DIMM socket support (Optional) 1 DIMM 2 DIMMs 4 DIMMs A-DA TA AD31333001GOU 1GB SS A-Data AD30908C8D-151C E0906 - - • A-DA TA AD3U1333C2G9 2GB SS A-DA T A 3CCD-1509HNA1126L - - • • • A-[...]

ASUS P8B75-M 1-16 DDR3-1333 MHz capability V endors Part No. Size SS/ DS Chip Brand Chip NO. Timing Voltage DIMM socket support (Optional) 1 DIMM 2 DIMMs 4 DIMMs KINGSTON KVR1333D3N9/4G(low prole) 4GB DS ELPIDA J2108BCSE-DJ-F - 1.5V • • • KINGSTON KVR1333D3N9/4G 4GB DS KTC D2568JENCNGD9U - 1.5V • • • KINGSTON KVR1333D3N9/4G 4GB DS Hy[...]

1-17 Chapter 1: Product introduction DDR3-1066 MHz capability Side(s): SS - Single-sided DS - Double-sided DIMM support: • 1 DIMM : Supports one (1) module inserted into any slot as Single-channel memory conguration. We suggest that you install the module into A2 slot. • 2 DIMM s: Supports two (2) modules inserted into either the blue slots [...]

ASUS P8B75-M 1-18 1.7.3 Installing a DIMM Unplug the power supply before adding or removing DIMMs or other system components. Failure to do so can cause severe damage to both the motherboard and the components. 1. Press the retaining clips outward to unlock a DIMM socket. 2. Align a DIMM on the socket such that the notch on the DIMM matches the DIM[...]

1-19 Chapter 1: Product introduction 1.8 Expansion slots In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support. Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. 1[...]

ASUS P8B75-M 1-20 IRQ assignments for this motherboard A B C D E F G H Intel PCH SA T A controller #0 – – – shared – – – – Intel PCH SA T A controller #1 – – – shared – – – – Realtek 81 1 1F controller – shared – – – – – – 1.9 Jumpers 1. Intel ® ME jumper (3-pin DIS_ME) This jumper allows you to enable or [...]

1-21 Chapter 1: Product introduction 2. Clear RTC RAM (3-pin CLRTC) This jumper allows you to clear the Real T ime Clock (RTC) RAM in CMOS. Y ou can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information su[...]

ASUS P8B75-M 1-22 1.10 Connectors 1.10.1 Rear panel connectors 1. PS/2 Mouse port (green). This port is for a PS/2 mouse. 2. Video Graphics Adapter (VGA) port. This 15-pin port is for a VGA monitor or other VGA-compatible devices. 3. LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN) through a network hub. Refer to [...]

1-23 Chapter 1: Product introduction 7. USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0/1.1 devices. 8. USB 3.0 ports 1 and 2. These two 9-pin Universal Serial Bus (USB) ports connect to USB 3.0/2.0 devices. • DO NOT connect a keyboard / mouse to any USB 3.0 port when installing Windows[...]

ASUS P8B75-M 1-24 1.10.2 Internal connectors 1. Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector . • We recommend that you connect a high-denit[...]

1-25 Chapter 1: Product introduction • For a fully congured system, we recommend that you use a power supply unit (PSU) that complies with A TX 12 V Specication 2.0 (or later version) and provides a minimum power of 350 W . • DO NOT forget to connect the 4-pin A TX +12V power plug. Otherwise, the system will not boot up. • We recommend [...]

ASUS P8B75-M 1-26 Do not forget to connect the fan cables to the fan connectors. Insufcient air ow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors! 5. CPU and chassis fan connectors (4-pin CPU_F AN, 3-pin CHA_F AN1/2) Connect the fan cables to the fan connectors on[...]

1-27 Chapter 1: Product introduction 7. System panel connector (10-1 pin F_P ANEL) This connector supports several chassis-mounted functions. • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector . The system power LED lights up when you turn on the system power , a[...]

ASUS P8B75-M 1-28 9. Intel ® B75 Serial A T A 3.0Gb/s connectors (7-pin SA T A3G_1~5 [blue]) These connectors connect to Serial A T A 3.0 Gb/s hard disk drives and optical drives via Serial A T A 3.0 Gb/s signal cables. • Y ou must install Windows ® XP Service Pack 3 or later version before using Serial A T A hard disk drives. • When using ho[...]

1-29 Chapter 1: Product introduction 1 1. USB 3.0 connector (20-1 pin USB3_34) This connector is for the additional USB 3.0 ports. Connect the USB 3.0 bracket cable to this connector , then install the USB 3.0 bracket to the rear side of the chassis. If your chassis support customized front panel installation, with ASUS USB 3.0 header , you can hav[...]

ASUS P8B75-M 1-30 13. TPM connector (20-1 pin TPM) This connector supports a T rusted Platform Module (TPM) system, which can securely store keys, digital certicates, passwords, and data. A TPM system also helps enhance network security , protects digital identities, and ensures platform integrity . The TPM module is purchased separately! 14. Se[...]

1-31 Chapter 1: Product introduction MemOK! switch Installing DIMMs that are incompatible with the motherboard may cause system boot failure, and the DRAM_LED near the MemOK! switch lights continuously . Press and hold the MemOK! switch until the DRAM_LED starts blinking to begin automatic memory compatibility tuning for successful boot. • Refer [...]

ASUS P8B75-M 1-32 1.12 Onboard LEDs 1. Standby Power LED The motherboard comes with a standby power LED that lights up to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component. The illustration be[...]

1-33 Chapter 1: Product introduction 1.13 Software support 1.13.1 Installing an operating system This motherboard supports Windows ® XP / 64-bit XP / 7 / 64-bit 7 Operating Systems (OS). Always install the latest OS version and corresponding updates to maximize the features of your hardware. • Motherboard settings and hardware options vary . Ref[...]

ASUS P8B75-M 1-34 1.13.3 Intel ® SBA support Intel ® SBA (Small Business Advantage) is a combination of hardware and software that provides unique security and productivity capabilities designed for small businesses. Intel ® SBA requires MEI driver (AMT host software kit) installed. Platform requirements: • Windows ® 7 (32/64bit) • Panther [...]

Chapter 2: BIOS information 2-1 Chapter 2 BIOS information Save a copy of the original motherboard BIOS le to a USB ash disk in case you need to restore the BIOS in the future. Copy the original motherboard BIOS using the ASUS Update utility . • ASUS Update requires an Internet connection either through a network or an Internet Service Prov[...]

2-2 ASUS P8B75-M 2.1.2 ASUS EZ Flash 2 The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS-based utility . Before you start using this utility , download the latest BIOS le from the ASUS website at www .asus.com. T o update the BIOS using EZ Flash 2: 1. Insert the USB ash disk that contains the latest BIOS le to t[...]

Chapter 2: BIOS information 2-3 • This function supports USB ash disks with F A T 32/16 format and single partition only . • DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure! 2.1.3 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS ?[...]

2-4 ASUS P8B75-M Welcome to FreeDOS (http://www.freedos.org)! C:>d: D:> 3. When the Make Disk menu appears, select the FreeDOS command prompt item by pressing the item number . 4. At the FreeDOS prompt, type d: and press <Enter> to switch the disk from Drive C (optical drive) to Drive D (USB ash drive). Please select boot device: S[...]

Chapter 2: BIOS information 2-5 Updating the BIOS le T o update the BIOS le using BIOS Updater 1. At the FreeDOS prompt, type bupdater /pc /g and press <Enter>. ASUSTek BIOS Updater for DOS V1.28 Current ROM Update ROM A: Note [Enter] Select or Load [Tab] Switch [V] Drive Info [Up/Down/Home/End] Move [Esc] Exit P8B75.CAP 8390656 2012-01[...]

2-6 ASUS P8B75-M Using the power button , reset button , or the <Ctrl>+<Alt>+<Del> keys to force reset from a running operating system can cause damage to your data or system. We recommend to always shut down the system properly from the operating system. • The BIOS setup screens shown in this section are for reference purposes [...]

Chapter 2: BIOS information 2-7 EZ Mode By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ Mode provides you an overview of the basic system information, and allows you to select the display language, system performance mode and boot device priority . T o access the Advanced Mode , click Exit/Advanced Mode , then s[...]

2-8 ASUS P8B75-M Advanced Mode The Advanced Mode provides advanced options for experienced end-users to congure the BIOS settings. The gure below shows an example of the Advanced Mode . Refer to the following sections for the detailed congurations. T o access the EZ Mode, click Exit , then select ASUS EZ Mode . Main Ai T weaker Advanced Mo[...]

Chapter 2: BIOS information 2-9 Pop-up window Select a menu item and press <Enter> to display a pop-up window with the conguration options for that item. Scroll bar A scroll bar appears on the right side of a menu screen when there are items that do not t on the screen. Press the Up/Down arrow keys or <Page Up> / <Page Down>[...]

2-10 ASUS P8B75-M 2.3.1 System Language [English] Allows you to choose the BIOS language version from the options. Conguration options: [English] [Español] [Русский] 2.3.2 System Date [Day xx/xx/xxxx] Allows you to set the system date. 2.3.3 System Time [xx:xx:xx] Allows you to set the system time. 2.3.4 Security The Security menu items [...]

Chapter 2: BIOS information 2-1 1 Administrator Password If you have set an administrator password, we recommend that you enter the administrator password for accessing the system. Otherwise, you might be able to see or change only selected elds in the BIOS setup program. T o set an administrator password: 1. Select the Administrator Password it[...]

2-12 ASUS P8B75-M Main Ai T weaker Advanced Monitor Boot T ool Exit Version 2.10.1208. Copyright (C) 2012 American Megatrends, Inc. Forces a DDR3 frequency slower than the common tCK detected via SPD. →← : Select Screen ↑↓ : Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous V alues F3: Shortcut F5: Optimized Defaults [...]

Chapter 2: BIOS information 2-13 2.4.3 EPU Power Saving Mode [Disabled] Allows you to enable or disable the EPU power saving function. Conguration options: [Disabled] [Enabled] EPU Setting [Auto] This item appears only when you set the EPU Power Saving Mode item to [Enabled] and allows you to select the EPU power saving mode. Conguration opti[...]

2-14 ASUS P8B75-M Long Duration Maintained [Auto] Allows you to maintain the turbo ratio’s long duration power . Use the <+> and <-> keys to adjust the value. Short Duration Power Limit [Auto] Allows you to limit the turbo ratio’s long duration power . Use the <+> and <-> keys to adjust the value. Primary Plane Current L[...]

Chapter 2: BIOS information 2-15 2.4.12 PCH V oltage [Auto] Allows you to set the Platform Controller Hub voltage. The values range from 0.7350V to 1.6850V with a 0.0050V interval. • The values of the CPU Offset V oltage , DRAM V oltage , and PCH V oltage items are labeled in different color , indicating the risk levels of high voltage settings. [...]

2-16 ASUS P8B75-M 2.5.2 CPU Conguration The items in this menu show the CPU-related information that the BIOS automatically detects. The items shown in submenu may be different due to the CPU you installed. Intel Adaptive Thermal Monitor [Enabled] [Enabled] Enables the overheated CPU to throttle its clock speed to cool down. [Disabled] Disables [...]

Chapter 2: BIOS information 2-17 CPU Power Management Conguration CPU Ratio [Auto] Allows you to set the ratio between the CPU Core Clock and the BCLK Frequency . Use <+> and <-> keys to adjust the ratio. The valid value ranges vary according to your CPU model. Enhanced Intel SpeedStep T echnology [Enabled] Allows you to enable or di[...]

2-18 ASUS P8B75-M S.M.A.R.T . Status Check [Enabled] S.M.A.R.T . (Self-Monitoring, Analysis and Reporting T echnology) is a monitor system. When read/write of your hard disk errors occur , this feature allows the hard disk to report warning messages during the POST . Conguration options: [Enabled] [Disabled] Hot Plug [Disabled] This item only ap[...]

Chapter 2: BIOS information 2-19 2.5.7 AMT Conguration The items in this menu allow you to change the Intel ® Active Management T echnology (AMT) feature. Intel AMT [Enabled] Allow you to enable or disable the Intel ® Active Management T echnology (AMT) in the BIOS extension. Conguration options: [Enabled] [Disabled] iAMT H/W is always enab[...]

2-20 ASUS P8B75-M Legacy USB3.0 Support [Enabled] This item appears only on P8Q67-M DO/USB3/TPM. [Enabled] Enables the support for USB 3.0 devices on legacy operating systems (OS). [Disabled] Disables the function. Intel xHCI Mode [Enabled] Allows you to select an operation mode for the Intel xHCI controller . Conguration options: [Smart Auto] [[...]

Chapter 2: BIOS information 2-21 Change Settings [IO=3F8h; IRQ=4] Allows you to select the Serial Port base address. Conguration options: [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3] Parallel Port Conguration The sub-items in this menu allow you to set the parallel port conguration. Parallel Port [Enabled] Allows you[...]

2-22 ASUS P8B75-M 2.6 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. Scroll down to display the following items: Main Ai T weaker Advanced Monitor Boot Tool Exit Version 2.10.1208. Copyright (C) 2012 American Megatrends, Inc. →← : Select Screen ↑↓ : Select Item Enter: S[...]

Chapter 2: BIOS information 2-23 2.6.1 CPU T emperature / MB T emperature [xxx�C/xxx�F] [xxx�C/xxx�F] The onboard hardware monitor automatically detects and displays the CPU and motherboard temperatures. Select Ignore if you do not wish to display the detected temperatures. 2.6.2 CPU / Chassis Fan Speed [xxxx RPM] or [Ignore] / [N/A] The on[...]

2-24 ASUS P8B75-M 2.6.4 Chassis Q-Fan Control [Enabled] [Disabled] Disables the Chassis Q-Fan control feature. [Enabled] Enables the Chassis Q-Fan control feature. Chassis Fan Speed Low Limit [600 RPM] This item appears only when you enable the Chassis Q-Fan Control feature and allows you to disable or set the chassis fan warning speed. Congurat[...]

Chapter 2: BIOS information 2-25 2.7 Boot menu The Boot menu items allow you to change the system boot options. 2.7.1 Bootup NumLock State [On] [On] Sets the power-on state of the NumLock to [On]. [Off] Sets the power-on state of the NumLock to [Off]. 2.7.2 Full Screen Logo [Enabled] [Enabled] Enables the full screen logo display feature. [Disabled[...]

2-26 ASUS P8B75-M 2.7.4 Option ROM Messages [Force BIOS] [Force BIOS] The third-party ROM messages will be forced to display during the boot sequence. [Keep Current] The third-party ROM messages will be displayed only if the third-party manufacturer had set the add-on device to do so. 2.7.5 Setup Mode [EZ Mode] [A dv an ce d Mo de ] Sets Advanced M[...]

Chapter 2: BIOS information 2-27 2.8 T ools menu The T ools menu items allow you to congure options for special functions. Select an item then press <Enter> to display the submenu. 2.8.1 ASUS EZ Flash 2 Utility Allows you to run ASUS EZ Flash 2. Press [Enter] to launch the ASUS EZ Flash 2 screen. For more details, see section 2.1.2 ASUS EZ[...]

2-28 ASUS P8B75-M 2.9 Exit menu The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. Y ou can access the EZ Mode from the Exit menu. Load Optimized Defaults This option allows you to load the default values for each of the parameters on the Setup menus. When you sel[...]

ASUS P8B75-M A-1 Appendices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received including interference that may cause undesired operation. This eq[...]

A-2 Appendices VCCI: Japan Compliance Statement VCCI Class B Statement KC: Korea W arning Statement Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Thi[...]

ASUS contact information ASUST eK COMPUTER INC. Address 15 Li-T e Road, Peitou, T aipei, T aiwan 1 1259 T elephone +886-2-2894-3447 Fax +886-2-2890-7798 E-mail info@asus.com.tw Web site www .asus.com.tw T echnical Support T elephone +86-21-3842991 1 Online support support.asus.com ASUS COMPUTER INTERNA TIONAL (America) Address 800 Corporate Way , F[...]

EC Declaration of Conformity We, the undersigned, Manufacturer: ASUSTek COMPUTER INC. Address, City: No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN R.O.C. Country: TAIWAN Authorized representative in Europe: ASUS COMPUTER GmbH Address, City: HARKORT STR. 21-23, 40880 RATINGEN Country: GERMANY declare the following apparatus: Product name : Motherbo[...]