Asus P9X79-E WS инструкция обслуживания

Motherboard P9X79-E WS[...]

ii E8097 First Edition March 2013 Copyright © 2013 ASUST eK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchase[...]

iii Contents Notices ....................................................................................................................... vi Safety information .................................................................................................... viii About this guide ................................................................[...]

iv Contents 2.5 T urning off the computer ......................................................................... 2-52 Chapter 3: BIOS setup 3.1 Knowing BIOS ............................................................................................ 3-3 3.2 BIOS setup program ......................................................................[...]

v Contents 4.3.4 ASUS Update .............................................................................. 4-9 4.3.5 DIGI+ Power Control ................................................................. 4-10 4.3.6 EPU ........................................................................................... 4-12 4.3.7 F AN Xpert+ ................[...]

vi Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received including interference that may cause undesired operation. This equipment has been test[...]

vii REACH Complying with the REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS website at http://csr .asus.com/english/REACH.htm. ASUS Recycling/T akeback Services ASUS recycling and takeback programs come from our commitment to the highes[...]

viii Safety information Electrical safety T o prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power[...]

ix Where to nd more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information. 2. Optional documentation Y our product package may include optional document[...]

x DANGER/W ARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. NOTE : Tips and additional information to help you complete a task. IMPORT ANT : Instructions that you MUST follow to complete a task. Conventions used in this guide T [...]

xi P9X79-E WS specications summary CPU 2nd Generation Intel ® Core™ i7 Processor for the LGA 201 1 Socket Intel ® Xeon ® E5-1600 processor for the LGA 201 1 Socket Intel ® Xeon ® E5-2600 processor for the LGA 201 1 Socket Supports Intel ® T urbo Boost T echnology 2.0 *Refer to www .asus.com for CPU support list Chipset Intel ® X79 Expre[...]

xii 1394 VIA VT6315N controller support 1x1394a port Audio Realtek ® ALC 1 150 8-channel High Denition Audio CODEC - Supports 192kHz/ 24bit BD Lossless Sound - DTS Surround Sensation UltraPC II - Supports Jack-Detection, Multi-Streaming, and Front Panel Jack-Retasking - Optical S/PDIF Out port at back I/O ASUS Unique Features Industry leading D[...]

xiii Back Panel I/O Ports 2 x USB 3.0/2.0 ports (blue) 10 x USB 2.0/1.1 ports (white port can be switched to USB BIOS Flashback) 1 x USB BIOS Flashback Switch 1 x PS/2 KB/MS port 2 x eSA T A 6Gb/s ports 2 x LAN (RJ45) ports (2 x Intel ® LAN) 1 x optical S/PDIF Out port 8-channel Audio I/O Internal I/O Connectors 1 x USB 3.0/2.0 connector support a[...]

xiv[...]

Chapter 1: Product Introduction[...]

ASUS P9X79-E WS Chapter summary 1 This chapter describes the motherboard features and the new technologies it supports. This chapter contains the following sections: 1.1 Welcome! .................................................................................................... 1-3 1.2 Package contents .............................................[...]

ASUS P9X79-E WS 1-3 If any of the above items is damaged or missing, contact your retailer . Motherboard ASUS P9X79-E WS I/O modules 1 x 2-port USB 2.0 + 1-port 1394 module Cables 4 x Serial A T A 6.0 Gb/s cables 2 x Serial A T A 3.0 Gb/s power cables 2 x Serial A T A 3.0 Gb/s cables 1 x COM port cable Accessories 1 x ASUS Q-Shield (I/O shield ) 1 [...]

1-4 Chapter 1: Product Introduction 1.3 Special features 1.3.1 Product highlights Intel ® Socket 201 1 for 2nd Generation Intel ® Core ™ i7 Processor Extreme Edition This motherboard supports the latest Intel® 2nd Generation Core™ i7 Processor Extreme in LGA201 1 package, with memory and PCI Express controllers integrated to quad- channel (8[...]

ASUS P9X79-E WS 1-5 Power eSA T A 6Gb/s Ready 2X faster with fully charged power Powered eSA T A 6Gb/s combines data and power connectivity . Users enjoy 2X faster transfer rates, and can use external SA T A 6Gb/s devices with no additional power adapters. ASUS provides two extra ports with enhanced scalability , faster data retrieval, and double t[...]

1-6 Chapter 1: Product Introduction 1.3.3 ASUS features New DIGI+ Power Control All-New Digital Power Control for both CPU and DRAM ASUS X79 motherboards include New DIGI+ Power Control with two digital voltage regulator modules (VRMs), including an all-new DRAM controller that allows ultra-precise memory tuning in addition to CPU voltage control. [...]

ASUS P9X79-E WS 1-7 USB 3.0 Boost New ASUS USB 3.0 Boost technology supports UASP (USB Attached SCSI Protocol), the latest USB 3.0 standard. With USB 3.0 Boost technology , the performance of a USB device transmission speed is signicantly increased up to 130% (TBD), adding to an already impressive fast USB 3.0 transfer speed. With USB 3.0 Boost [...]

1-8 Chapter 1: Product Introduction ASUS Fanless Design—Heat-pipe solution The stylish heatsink offers 0dB cooling for a quiet PC environment. Attractive design enhances the look of the board and case, while temperatures in the chipset and power phase areas stay lower through high efciency heat exchange. Combining usability and aesthetics,the [...]

ASUS P9X79-E WS 1-9 ASUS Q-Design ASUS Q-Design enhances your DIY experience. All of Q-LED, Q-Slot, Q-Code and Q-DIMM design speed up and simplify the DIY process! ASUS Q-Shield The specially designed ASUS Q-Shield does without the usual "ngers" - making it convenient and easy to install. With better electric conductivity , it ideally [...]

1-10 Chapter 1: Product Introduction[...]

Chapter 2: Hardware Information[...]

ASUS P9X79-E WS Chapter summary 2 2.1 Before you proceed ................................................................................... 2-3 2.2 Motherboard overview ............................................................................... 2-4 2.3 Building your computer system ............................................................. [...]

2.1 Before you proceed T ake note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power s[...]

2.2 Motherboard overview 2.2.1 Motherboard layout Refer to 2.2.9 Internal Connectors for more information about rear panel connectors and internal connectors. 2-4 Chapter 2: Hardware information[...]

2.2.2 Layout contents Connectors/Jumpers/Switches/Slots Page 1. A TX Power connectors (24-pin EA TXPWR, 8-pin EA TX12V , 6-pin EA TX12V_1) 2-35 2. DDR3 DIMM slots 2-7 3. LGA201 1 CPU Socket 2-6 4. CPU, CPU OPT , Chassis fan connectors (4-pin CPU_F AN, 4-pin CHA_OPT , 4-pin CHA_F AN1/2/3/4) 2-32 5. Reset switch 2-1 1 6. Power-on switch 2-1 1 7. ASUS[...]

2.2.3 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA201 1 socket designed for the 2 nd Generation Intel ® Core™ i7 Processor Extreme Edition. • Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the socket contacts are not bent. Contact your retailer immediately if the PnP cap is missin[...]

Recommended memory congurations 2.2.4 System memory The motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Modules (DIMM) slots. A DDR3 module is notched differently from a DDR or DDR2 module. DO NOT install a DDR or DDR2 memory module to the DDR3 slot. DIMM_D1 DIMM_D1 DIMM_B1 DIMM_D1 DIMM_B1 DIMM_A1 DIMM_C1 DIMM_D2 DIMM_D1[...]

Memory congurations Y ou may install 1GB, 2GB, 4GB, 8GB unbuffered ECC or non-ECC DDR3 DIMMs into the DIMM sockets depending on the installed CPU. • Y ou may install varying memory sizes in Channel A, Channel B, Channel C and Channel D. The system maps the total size of the lower-sized channel for the dual- channel conguration. Any excess m[...]

2.2.5 Expansion slots Ensure to unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. No. Slot Description 1 PCIEX16_1 PCIe 3.0 x16_1 slot (single at x16 mode, blue) 2 PCIEX16_2 PCIe 3.0 x16_6 slot (x8 mode, black) 3 PCIEX16_3 PCIe 3.0 x16_1 slot (single at[...]

IRQ assignments for this motherboard A B C D E F G H PCIEx16_1 shared – – – – – – – PCIEx16_2 shared – – – – – – – PCIEx16_3 shared – – – – – – – PCIEx16_4 shared – – – – – – – PCIEx16_5 shared – – – – – – – PCIEx16_6 shared – – – – – – – PCIEx16_7 shared – – ?[...]

2.2.6 Onboard switches Onboard switches allow you to ne-tune performance when working on a bare or open- case system. This is ideal for overclockers and gamers who continually change settings to enhance system performance. 1. Power-on button The motherboard comes with a power-on switch that allows you to power up or wake up the system. The switc[...]

3. EPU switch T urning this switch to Enable will automatically detect the current PC loadings and intelligently moderate the power consumption. For ensuring system performance, turn the switch setting to Enable when the system is powered off. 4. TPU switch T urning this switch to Enable will automatically optimize the system for fast, yet stable c[...]

5. MemOK! switch Installing DIMMs that are incompatible with the motherboard may cause system boot failure, and the DIAGLED near the MemOK! switch lights continuously . Press and hold the MemOK! switch until the DIAG_LED starts blinking to begin automatic memory compatibility tuning for successful boot. • Refer to section 2.2.7 Onboard LEDs for t[...]

6. ASUS Dr . POWER switch This switch allows you to enable or disable the ASUS Dr . Power feature. Install the bundled ASUS Dr . Power Utility then enable this switch to allow the system to display notication messages in your Windows screen if a problem is detected with your power supply unit (PSU). 2-14 Chapter 2: Hardware information[...]

2.2.7 Onboard LEDs 1. Diagnosis LED These diagnosis LEDs of CPU, DRAM, VGA card, and HDD indicate key component status during POST (Power-on Self T est), providing an elegant embellishment to the motherboard design. The LED lights will ash sequentially during system bootup. If an error is found, the LED next to the error device will continue lig[...]

3. TPU LED The TPU LED lights up when the TPU switch is turned to Enable . 4. Q-Code LED The Q -Code L ED desi gn prov ides yo u the 2- digit d isplay , allowin g you to know th e system status. Refer to the Q-Code table on the next page for details. 2-16 Chapter 2: Hardware information[...]

Q-Code table Code Description 00 Not used 01 Power on. Reset type detection (soft/hard). 02 AP initialization before microcode loading 03 System Agent initialization before microcode loading 04 PCH initialization before microcode loading 05 Initialization before microcode loading 06 Microcode loading 07 AP initialization after microcode loading 08 [...]

Code Description 31 Memory Installed 32 – 36 CPU post-memory initialization 37 – 3A Post-Memory System Agent initialization is started 3B – 3E Post-Memory PCH initialization is started 3F – 4E Post memory initialization codes 4F DXE IPL is started 50 – 53 Memory initialization error . Invalid memory type or incompatible memory speed 54 Un[...]

Q-Code table (continued) Code Description F5-F7 Reserved for future AMI progress codes F8 Recovery PPI is not available F9 Recovery capsule is not found F A Invalid recovery capsule FB-FF Reserved for future AMI error codes 60 DXE Core is started 61 NVRAM initialization 62 Installation of the PCH Runtime Services 63 – 67 CPU DXE initialization is[...]

Q-Code table (continued) Code Description 97 Console Output devices connect 98 Console input devices connect 99 Super IO Initialization 9A USB initialization is started 9B USB Reset 9C USB Detect 9D USB Enable 9E-9F Reserved for future AMI codes A0 IDE initialization is started A1 IDE Reset A2 IDE Detect A3 IDE Enable A4 SCSI initialization is star[...]

Code Description AC Reserved for ASL (see ASL Status Codes section below) AD Ready T o Boot event AE Legacy Boot event AF Exit Boot Services event B0 Runtime Set Virtual Address MAP Begin B1 Runtime Set Virtual Address MAP End B2 Legacy Option ROM Initialization B3 System Reset B4 USB hot plug B5 PCI bus hot plug B6 Clean-up of NVRAM B7 Congurat[...]

Code Description 0x01 System is entering S1 sleep state 0x02 System is entering S2 sleep state 0x03 System is entering S3 sleep state 0x04 System is entering S4 sleep state 0x05 System is entering S5 sleep state 0x10 System is waking up from the S1 sleep state 0x20 System is waking up from the S2 sleep state 0x30 System is waking up from the S3 sle[...]

6. PGLED3 LED The ASUS Dr . Power LED near the ASUS Dr. Power switch lights up when the ASUS Dr . Power switch is turned to enable. 7. +12V_PWR LED The ASUS Dr . Power LED near EA TX12V connector lights up when the ASUS Dr . Power switch setting is turned to enable and there is no power detected going into the processor . ASUS P9X79-E WS 2-23[...]

2.2.8 Jumper 1. Clear RTC RAM (3-pin CLRTC) This jumper allows you to clear the Real T ime Clock (RTC) RAM in CMOS. Y ou can reset the system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information such as system passwords. T o erase the RTC RAM 1. Turn O[...]

2. Chassis Fan control setting (3-pin CHAF AN_SEL) These jumpers allow you to switch for fan pin selection. The CHAF AN_SEL jumper is for the front fans and rear fans control. Set to pins 1–2 when using 3-pin fans or pins 2–3 when using 4-pin fans. • If you use a 4-pin fan but set the jumper to pin 1-2, the fan you installed may not work. •[...]

2.2.9 Internal connectors 1. Intel ® X79 Serial A T A 6.0 Gb/s connectors (7-pin SA T A6G_1/2 [gray]) These connectors connect to Serial A T A 6.0 Gb/s hard disk drives via Serial A T A 6.0 Gb/s signal cables. • These connectors are set to [IDE Mode] by default. If you intend to create a Serial A T A RAID set using these connectors, set the SA T[...]

2. Intel ® X79 Serial A T A 3.0 Gb/s connectors (7-pin SA T A3G_3–6 [blue]) These connectors connect to Serial A T A 3.0 Gb/s hard disk drives and optical disc drives via Serial A T A 3.0 Gb/s signal cables. If you installed Serial A T A hard disk drives, you can create a RAID 0, 1, 5, and 10 conguration with the Intel ® Rapid Storage T echn[...]

3. Marvell ® Serial A T A 6.0 Gb/s connectors (7-pin SA T A6G_E1/E2/E3/E4 [gray]) These connectors connect to Serial A T A 6.0 Gb/s hard disk drives via Serial A T A 6.0 Gb/s signal cables. • For high performance of ASUS SSD Caching II, please connect one HDD and one SSD to Marvell ® SA T A6G_E12/E34 connectors. • F or reg ula r u sag e, the [...]

4. USB 3.0 connector (20-1 pin USB3_34) This con nector is for the a dditi onal USB 3 .0 p orts, and compl ies w ith the U SB 3. 0 specicaton that supports up to 5.0 Gbps connection speed. If the USB 3.0 front panel cable is available from your system chassis, with this USB 3.0 connector , you can have a front panel USB 3.0 solution. Y ou can co[...]

Y ou can connect the front panel USB cable to the ASUS Q-Connector (USB, blue) rst, and then install the Q-Connector (USB) to the USB connector onboard if your chassis supports front panel USB ports. Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! 5. USB 2.0 connectors (T ype A: USB13; 10-1 pin USB1 1 12; [...]

6. IEEE 1394a port connector (10-1 pin IE1394_1) This connector is for an IEEE 1394a port. Connect the IEEE 1394a module cable to this connector , then install the module to a slot opening at the back of the system chassis. Never connect a USB cable to the IEEE 1394a connector . Doing so will damage the motherboard! The IEEE 1394a module is purchas[...]

8. CPU, CPU OPT , Chassis fan connectors (4-pin CPU_F AN; 4-pin CPU_OPT ; 4-pin CHA_F AN1/2/3/4) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector . • The CPU_FAN connector supports the CPU fan of maximum 2A (24 W) fan power. • If you install two V[...]

9. Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector . • We recommend that you connect a high-denition front panel audio module to this connecto[...]

10. Serial port connector (10-1 pin COM1) This connector is for a serial (COM) port. Connect the serial port module cable to this connector , then install the module to a slot opening at the back of the system chassis. The COM module is purchased separately . 1 1. TPM connector (20-1 pin TPM) This connector supports a T rusted Platform Module (TPM)[...]

12. A TX power connectors (24-pin EA TXPWR; 8-pin EA TX12V , 6-pin EA TX12V_1) These connectors are for A TX power supply plugs. The power supply plugs are designed to t these connectors in only one orientation. Find the proper orientation and push down rmly until the connectors completely t. • For a fully congured system, we recommen[...]

• System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector . The system power LED lights up when you turn on the system power , and blinks when the system is in sleep mode. • Hard disk drive activity LED (2-pin IDE_LED) This 2-pin connector is for the HDD Activity LED.[...]

2.3 Building your computer system 2.3.1 Additional tools and components to build a PC system 1 bag of screws Philips (cross) screwdriver PC chassis Power supply unit Intel LGA 201 1 CPU Intel LGA 201 1 compatible CPU Fan DIMM SA T A hard disk drive SA T A optical disc drive (optional) Graphics card The tools and components in the table above are no[...]

2.3.2 CPU installation Please note the order in opening/ closing the double latch. Follow the instructions printed on the metal sealing hatch or the illustrations shown below in this manual. The plastic cap will pop up automatically once the CPU is in place and the hatch properly sealed down. 1 2 B A Load lever C B A 3 4 B A 2-38 Chapter 2: Hardwar[...]

9 7 8 5 6 T riangle mark B A B A ASUS P9X79-E WS 2-39[...]

2.3.3 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before yo u i ns ta ll th e hea ts in k a nd fa n if necessary . T o install the CPU heatsink and fan assembly 1 2 A B B A 2-40 Chapter 2: Hardware information[...]

1 2 3 T o remove a DIMM 2.3.4 DIMM installation B A ASUS P9X79-E WS 2-41[...]

2.3.5 Motherboard installation The diagrams in this section are for reference only . The motherboard layout may vary with models, but the installation steps remain the same. 2 1 2-42 Chapter 2: Hardware information[...]

DO NOT overtighten the screws! Doing so can damage the motherboard. 3 ASUS P9X79-E WS 2-43[...]

2.3.6 A TX Power connection 1 2 OR 2-44 Chapter 2: Hardware information[...]

2.3.7 SA T A device connection 2 OR 1 ASUS P9X79-E WS 2-45[...]

2.3.8 Front I/O Connector IDE_LED POWER SW RESET SW IDE_LED- IDE_LED+ PWR Reset Ground Ground 1 2 USB AAFP T o install ASUS Q-Connector T o install USB Connector T o install front panel audio connector The actual location may vary with motherboards. 2-46 Chapter 2: Hardware information[...]

2.3.9 Rear panel connection Rear panel connectors 1. PS/2 mouse and keyboard port 7. USB BIOS Flashback button 2. LAN (RJ-45) port 1* 8. Optical S/PDIF Out port 3. USB 3.0 ports 1 and 2 9. USB 2.0 ports 7 and 8 4. LAN (RJ-45) port 2** 10. External SA T A 6.0 Gb/s ports 1 and 2 5. USB 2.0 ports 1 and 2 1 1. USB 2.0 ports 9 and 10 6. USB 2.0 ports 3,[...]

**Audio 2, 4, 6, or 8-channel conguration Port Headset 2-channel 4-channel 6-channel 8-channel Light Blue Line In Line In Line In Line In Lime Line Out Front Speaker Out Front Speaker Out Front Speaker Out Pink Mic In Mic In Mic In Mic In Orange – – Center/Subwoofer Center/Subwoofer Black – Rear Speaker Out Rear Speaker Out Rear Speaker Ou[...]

Connect to Stereo Speakers Connect to 2.1 channel Speakers Connect to 4.1 channel Speakers ASUS P9X79-E WS 2-49[...]

Connect to 5.1 channel Speakers Connect to 7.1 channel Speakers 2-50 Chapter 2: Hardware information[...]

1. Download the BIOS Flashback program le from the ASUS service website (www.asus. com). Save the program le to a USB portable disk. 2. On the rear I/O port, plug the USB disk to USB port 1 with the WHITE interior . (See red box in the image below) 3. Press the BIOS Flashback button for 3 seconds, and the light will begin to ash (on the th[...]

2.4 Starting up for the rst time 1. After making all the connections, replace the system case cover . 2. Be sure that all switches are of f. 3. Connect the power cord to the power connector at the back of the system chassis. 4. Connect the power cord to a power outlet that is equipped with a surge protector . 5. T urn on the devices in the follo[...]

Chapter 3: BIOS setup[...]

ASUS P9X79-E WS Chapter summary 3 This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. This chapter contains the following sections: 3.1 Knowing BIOS ............................................................................................ 3-3 3.2 BIOS [...]

ASUS P9X79-E WS 3-3 The new ASUS UEFI BIOS is an Extensible Firmware Interface that complies with UEFI architecture, offering a user-friendly interface that goes beyond traditional keyboard-only BIOS controls to enable more exible and convenient mouse input. Users can easily navigate the new UEFI BIOS with the same smoothness as their operating [...]

3-4 Chapter 3: BIOS setup 3.2.1 EZ Mode By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ Mode provides you an overview of the basic system information, and allows you to select the display language, system performance mode and boot device priority . T o access the Advanced Mode, click Exit/Advanced Mode , then se[...]

ASUS P9X79-E WS 3-5 3.2.2 Advanced Mode The Advanced Mode provides advanced options for experienced end-users to congure the BIOS settings. The gure below shows an example of the Advanced Mode. Refer to the following sections for the detailed congurations. T o access the EZ Mode, click Exit , then select ASUS EZ Mode . Menu bar The menu ba[...]

3-6 Chapter 3: BIOS setup Menu items The highlighted item on the menu bar displays the specic items for that menu. For example, selecting Main shows the Main menu items. The other items (Ai T weaker, Advanced, Monitor , Boot, T ool, and Exit) on the menu bar have their respective menu items. Back button This button appears when entering a submen[...]

ASUS P9X79-E WS 3-7 3.3 Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings. Security The Security menu items allow you to change the system security sett[...]

3-8 Chapter 3: BIOS setup Administrator Password If you have set an administrator password, we recommend that you enter the administrator password for accessing the system. Otherwise, you might be able to see or change only selected elds in the BIOS setup program. T o set an administrator password: 1. Select the Administrator Password item and p[...]

ASUS P9X79-E WS 3-9 3.4 Ai Tweaker menu The Ai T weaker menu items allow you to congure overclocking-related items. Be cautious when changing the settings of the Ai T weaker menu items. Incorrect eld values can cause the system to malfunction. The conguration options for this section vary depending on the CPU and DIMM model you installed o[...]

3-10 Chapter 3: BIOS setup Scroll down to display the following items: Ai Overclock T uner [Auto] Allows you to select the CPU overclocking options to achieve the desired CPU internal frequency . Select any of these preset overclocking conguration options: [Auto] Loads the optimal settings for the system. [Manual] Allows you to individually set [...]

ASUS P9X79-E WS 3-1 1 T urbo Ratio [Auto] Allows you to manually adjust the T urbo CPU ratio. [Auto] All Turbo ratio are set by Intel CPU default settings [By ALL Cores (Can Adjust in OS)] All numbers of active cores will be set to one single Turbo ratio in OS [By Per Core (Cannot Adjust in OS)] All numbers of active cores can be set to an individu[...]

3-12 Chapter 3: BIOS setup Primary Timings DRAM CAS# Latency [Auto] Use the <+> and <-> keys to adjust the value. The values range from 3 to 15 with 1 interval. DRAM RAS# to CAS# Delay [Auto] Use the <+> and <-> keys to adjust the value. The values range from 4 to 15 with 1 interval. DRAM RAS# PRE Time [Auto] Use the <+&g[...]

ASUS P9X79-E WS 3-13 tRWDD [Auto] Use the <+> and <-> keys to adjust the value. The values range from 0 to 15 with 1 interval. tWRDR [Auto] Use the <+> and <-> keys to adjust the value. The values range from 0 to 7 with 1 interval. tWRDD [Auto] Use the <+> and <-> keys to adjust the value. The values range from 0[...]

3-14 Chapter 3: BIOS setup DRAM IOL (CHA D1 R1) [Auto] Conguration options: [Auto] [Advance 14 Clock] – [Advance 1 Clock] [Normal] [Delay 1 Clock] – [Delay 14 Clock] DRAM RTL (CHB D0 R0) [Auto] Conguration options: [Auto] [Advance 14 Clock] [Advance 12 Clock] [Advance 10 Clock] [Advance 8 Clock] [Advance 6 Clock] [Advance 4 Clock] [Advanc[...]

ASUS P9X79-E WS 3-15 DRAM IOL (CHC D0 R0) [Auto] Conguration options: [Auto] [Advance 14 Clock] – [Advance 1 Clock] [Normal] [Delay 1 Clock] – [Delay 14 Clock] DRAM RTL (CHC D0 R1) [Auto] Conguration options: [Auto] [Advance 14 Clock] [Advance 12 Clock] [Advance 10 Clock] [Advance 8 Clock] [Advance 6 Clock] [Advance 4 Clock] [Advance 2 Cl[...]

3-16 Chapter 3: BIOS setup DRAM IOL (CHD D0 R1) [Auto] Conguration options: [Auto] [Advance 14 Clock] – [Advance 1 Clock] [Normal] [Delay 1 Clock] – [Delay 14 Clock] DRAM RTL (CHD D1 R0) [Auto] Conguration options: [Auto] [Advance 14 Clock] [Advance 12 Clock] [Advance 10 Clock] [Advance 8 Clock] [Advance 6 Clock] [Advance 4 Clock] [Advanc[...]

ASUS P9X79-E WS 3-17 T ransmitter Slew [Auto] Conguration options: [Auto] [Normal] [More] MCH Recheck [Auto] Conguration options: [Auto] [Disabled] [Enabled] MRC Fast W arm Boot [Auto] Conguration options: [Auto] [Disabled] DIGI+ Power Control CPU Load-Line Calibration [Auto] CPU Load-line is dened by Intel spec and affects CPU voltage.[...]

3-18 Chapter 3: BIOS setup VCCSA Current Capability [100%] Allows you to set the VCCSA current capability . A higher value brings wider total DRAM controller power range and extends the overclocking frequency range simultaneously . Conguration options: [100%] [1 10%] [120%] [130%] CPU VCCSA Boot Up V oltage [Auto] This adjusts the voltage for VC[...]

ASUS P9X79-E WS 3-19 Manual Adjustment [Medium] This item appears when you set the CPU Power Phase Control item to [Manual Adjustment]. Select Ultra Fast for a faster response. The reaction time will be longer when Regular is selected. Configuration options: [Ultra Fast] [Fast] [Medium] [Regular] Do not remove the thermal module when switching to E[...]

3-20 Chapter 3: BIOS setup CPU Performance Settings The items in this menu is setting for CPU Ratio/Features. CPU Ratio [Auto] This item allows user manually adjust the maximum non-turbo CPU ratio. The value will be limited to CPU-based or factory settings. Adjusting the CPU Ratio value will change CPU Performance Settings. Use the <+> and &l[...]

ASUS P9X79-E WS 3-21 CPU VCORE V oltage [Offset Mode] This adjusts the power supply for the processor cores and cache to help core frequency overclocking. [Manual Mode] Allows you to set a xed CPU VCORE voltage. [Offset Mode] Allows you to set the Of fset voltage. CPU VCORE Manual V oltage [Auto] This item appears only when you set the CPU VCORE[...]

3-22 Chapter 3: BIOS setup DRAM V oltage (CHA, CHB) [Auto] Allows you to set the DRAM voltage. The values range from 1.20V to 1.99V with a 0.005V interval. DRAM V oltage (CHC, CHD) [Auto] Allows you to set the DRAM voltage. The values range from 1.20V to 1.99V with a 0.005V interval. According to Intel CPU spec, DIMMs with voltage requirement over [...]

ASUS P9X79-E WS 3-23 DRAM CTRL REF V oltage on CHB [Auto] Allows you to set the DRAM CTRL REF Voltage on Channel B. The values range from 0.3950x to 0.6300x with a 0.005x interval. DRAM DA T A REF V oltage on CHB [Auto] Allows you to set the DRAM DA T A REF V oltage on Channel B. The values range from 0.3950x to 0.6300x with a 0.005x interval. DRAM[...]

3-24 Chapter 3: BIOS setup Be cautious when changing the settings of the Advanced menu items. Incorrect eld values can cause the system to malfunction. 3.5 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices.[...]

ASUS P9X79-E WS 3-25 3.5.1 CPU Conguration The items in this menu show the CPU-related information that the BIOS automatically detects. The items shown in this screen may be different due to the CPU you installed. Intel Adaptive Thermal Monitor [Enabled] This function includes TM1, TM2, and EMTTM. [Disabled] Disables the CPU thermal monitor func[...]

3-26 Chapter 3: BIOS setup Active Processor Cores [All] Allows you to choose the number of CPU cores to activate in each processor package. Conguration options: [All] [1] [2] [3] [4] [5] Limit CPUID Maximum [Disabled] [Enabled] Allows legacy operating systems to boot even without support for CPUs with extended CPUID functions. [Disabled] Disable[...]

ASUS P9X79-E WS 3-27 CPU C3 Report [Auto] Allows you to disable or enable the CPU C3 report to OS. CPU C6 Report [Auto] Allows you to disable or enable the CPU C6 report to OS. CPU C7 Report [Auto] Allows you to disable or enable the CPU C7 report to OS. 3.5.2 System Agent Conguration Intel (R) VT -d [Disabled] Allows you to enable virtualizatio[...]

3-28 Chapter 3: BIOS setup 3.5.3 PCH Conguration High Precision Timer [Enabled] Allows you to enable or disable the High Precision Event T imer . Conguration options: [Disabled] [Enabled] 3.5.4 SA T A Conguration Whil e ente ring Se tup, t he BIOS autom atical ly d etects the pr esence of SA T A dev ices. The S A T A Port items show N ot P[...]

ASUS P9X79-E WS 3-29 SA T A Mode [AHCI Mode] Allows you to set the SA T A conguration. [Disabled] Disables the SA T A function. [IDE Mode] Set to [IDE Mode] when you want to use the Serial A T A hard disk drives as Parallel A T A physical storage devices. Hotplug support congurations for SA T A are disallowed under this mode. [AHCI Mode] Set [...]

3-30 Chapter 3: BIOS setup SA T A6G_5 (Blue) Hot Plug [Disabled] This item appears only when you set the previous item to [AHCI Mode] and [RAID mode]. It allows users to enable/disable SA T A Hot Plug Support. Conguration options: [Disabled] [Enabled]. SA T A6G_6 (Blue) Hot Plug [Disabled] This item appear only when you set the previous item to [...]

ASUS P9X79-E WS 3-31 The USB Devices item shows the auto-detected values. If no USB device is detected, the item shows None . Legacy USB Support [Enabled] [Disabled] The USB devices can be used only for the BIOS setup program. [Enabled] Enables the support for USB devices on legacy operating systems (OS). [Auto] Allows the system to detect the pres[...]

3-32 Chapter 3: BIOS setup 3.5.6 Onboard Devices Conguraton Azalia HD Audio [Enabled] [Disabled] Disables the controller. [Enabled] Enables the High Denition Audio Controller . The following two items appear only when you set the HD Audio Controller item to [Enabled]. Front Panel T ype [HD] Allows you to set the front panel audio connector (A[...]

ASUS P9X79-E WS 3-33 Intel LAN1 Controller [Enabled] [Disabled] Disables the controller. [Enabled] Enables the Intel LAN controller . Intel LAN1 OPROM [Disabled] This item appears only when you set the previous item to [Enabled] and allows you to enable or disable the LAN1 PXE OptionRom of the Intel LAN controller . Conguration options: [Disable[...]

3-34 Chapter 3: BIOS setup Restore AC Power Loss [Power Off] [Power On] The system goes into on state after an AC power loss. [Power Off] The system goes into off state after an AC power loss. [Last State] The system goes into either off or on state, whatever the system state was before the AC power loss. Power On By PS/2 Keyboard [Disabled] [Disab[...]

ASUS P9X79-E WS 3-35 3.6 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. CPU T emperature / MB T emperature [xxxºC/xxxºF] The onboard hardware monitor automatically detects and displays the CPU and motherboard temperatures. Select Ignore if you do not wish to display the detec[...]

3-36 Chapter 3: BIOS setup CPU Fan Speed [xxxx RPM] or [Ignore] / [N/A] CPU OPT Speed [xxxx RPM] or [Ignore] / [N/A] Chassis Fan 1/2/3/4 Speed [xxxx RPM] or [Ignore] / [N/A] The onboard hardware monitor automatically detects and displays the CPU, CPU OPT , and chassis fan speed in rotations per minute (RPM). If the fan is not connected to the mothe[...]

ASUS P9X79-E WS 3-37 Chassis 1/2/3/4 Q-Fan Control [Enabled] [Disabled] Disables the Chassis Q-Fan control feature. [Enabled] Enables the Chassis Q-Fan control feature. Chassis 1/2/3/4 Fan Speed Low Limit [600 RPM] This item appears only when you enable the Chassis 1/2/3/4 Q-Fan Control feature and allows you to disable or set the chassis fan warni[...]

3-38 Chapter 3: BIOS setup 3.7 Boot menu The Boot menu items allow you to change the system boot options. Boot Conguration Fast Boot [Enabled] [Enabled] Select to accelerate the boot speed. [Disabled] Select to go back to normal boot. The following four items appear when you set Fast Boot to [Enabled]. USB Support [Partial Initialization] [Disab[...]

ASUS P9X79-E WS 3-39 PS/2 Keyboard and Mouse Support [Auto] Select any of these settings when PS/2 keyboard and mouse are installed. These settings only apply when Fast Boot is enabled. [Auto] For a faster POST time, PS/2 devices will only be available when the system boots up or rebooted when the PS/2 devices have not been reconnected or changed. [...]

3-40 Chapter 3: BIOS setup Setup Mode [EZ Mode] [A dv an ce d Mo de ] Sets Advanced Mode as the default screen for entering the BIOS setup program. [EZ Mode] Sets EZ Mode as the default screen for entering the BIOS setup program. CSM (Compatibility Support Module) Allows you to congure the CSM (Compatibility Support Module) items to fully suppor[...]

ASUS P9X79-E WS 3-41 Key Management This item appears only when you set Secure Boot Mode to [Custom] . It allows you to manage the Secure Boot keys. Install Default Secure Boot keys Allows you to immediately load the default Security Boot keys, Platform key (PK), Key-exchange Key (KEK), Signature database (db), and Revoked Signatures (dbx). When th[...]

3-42 Chapter 3: BIOS setup 3.8.1 ASUS EZ Flash 2 Utility Allows you to run ASUS EZ Flash 2 Utility to update BIOS. When you press <Enter>, a conrmation message appears. Use the left/right arrow key to select between [Y es] or [No], then press <Enter> to conrm your choice. For more details, refer to section 3.10.2 ASUS EZ Flash 2 u[...]

ASUS P9X79-E WS 3-43 3.8.3 ASUS O.C. Prole This item allows you to store or load multiple BIOS settings. The Setup Prole Status items will show Not Installed if no prole is created. • DO NOT shut down or reset the system while updating the BIOS to prevent the system boot failure! • We re commend that y ou u pdate t he B IOS le only [...]

3-44 Chapter 3: BIOS setup 3.9 Exit menu The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. Y ou can access the EZ Mode from the Exit menu. Load Optimized Defaults This option allows you to load the default values for each of the parameters on the Setup menus. Whe[...]

ASUS P9X79-E WS 3-45 3.10.1 ASUS Update utility The ASUS Update is a utility that allows you to manage, save, and update the motherboard BIOS in Windows ® environment. The ASUS Update utility allows you to: Update the BIOS directly from the Internet Download the latest BIOS le from the Internet Update the BIOS from an updated BIOS le Save th[...]

3-46 Chapter 3: BIOS setup Updating the BIOS through the Internet T o update the BIOS through the Internet: 1. From the ASUS Update screen, select Update BIOS from Internet , and then click Next . 2. Select the ASUS FTP site nearest you to avoid network trafc. If you want to enable the BIOS downgradable function and auto BIOS backup function, ch[...]

ASUS P9X79-E WS 3-47 • The screenshots in this section are for reference only . The actual BIOS information vary by models. • Refer to the software manual in the support DVD or visit the ASUS website at www .asus.com for detailed software conguration. Updating the BIOS through a BIOS le T o update the BIOS through a BIOS le: 1. From th[...]

3-48 Chapter 3: BIOS setup 3.10.2 ASUS EZ Flash 2 utility The ASUS EZ Flash 2 feature allows you to update the BIOS without having to use a bootable oppy disk or an OS-based utility . Before you start using this utility , download the latest BIOS from the ASUS website at www .asus.com. T o update the BIOS using EZ Flash 2: 1. Insert the USB a[...]

ASUS P9X79-E WS 3-49 3.10.3 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the BIOS le when it fails or gets corrupted during the updating process. Y ou can restore a corrupted BIOS le using the motherboard support DVD or a USB ash drive that contains the BIOS le. The [...]

3-50 Chapter 3: BIOS setup Booting the system in DOS environment 1. Insert the USB ash drive with the latest BIOS le and BIOS Updater to the USB port. 2. Boot your computer . When the ASUS Logo appears, press <F8> to show the BIOS Boot Device Select Menu . Insert the support DVD into the optical drive and select the optical drive as the[...]

ASUS P9X79-E WS 3-51 2. The BIOS Updater backup screen appears indicating the BIOS backup process. When BIOS backup is done, press any key to return to the DOS prompt. ASUSTek BIOS Updater for DOS V1.18 [2011/04/29] Current CAP Update CAP Note Saving BIOS: PATH: A: BOARD: P9X79-E WS VER: 0220 DATE: 08/09/2011 BOARD: Unknown VER: Unknown DATE: Unkn[...]

3-52 Chapter 3: BIOS setup 4. Select Y es and press <Enter>. When BIOS update is done, press <ESC> to exit BIOS Updater . Restart your computer . DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure! • For BIOS Updater version 1.04 or later, the utility automatically exits to the DOS prompt after[...]

Chapter 4: Software support[...]

ASUS P9X79-E WS Chapter summary 4 This chapter describes the contents of the support DVD that comes with the motherboard package and the software. This chapter contains the following sections: 4.1 Installing an operating system ................................................................. 4-3 4.2 Support DVD information ........................[...]

ASUS P9X79-E WS 4-3 If Autorun is NOT enabled in your computer , browse the contents of the support DVD to locate the le ASSETUP .EXE from the BIN folder . Double-click the ASSETUP .EXE to run the DVD. 4.1 Installing an operating system This motherboard supports Windows ® 8 / 64-bit 8 / 7 / 64-bit 7 operating systems (OS). Always install the la[...]

4-4 Chapter 4: Software support 4.2.2 Obtaining the software manuals The software manuals are included in the support DVD. Follow the instructions below to get the necessary software manuals. The software manual les are in Portable Document Format (PDF). Install the Adobe ® Acrobat ® Reader from the Utilities menu before opening the les. Th[...]

ASUS P9X79-E WS 4-5 4.3 Software information Most of the applications in the support DVD have wizards that will conveniently guide you through the installation. View the online help or readme le that came with the software application for more information. 4.3.1 ASUS AI Suite II AI Suite II is an all-in-one interface that integrates several ASUS[...]

4-6 Chapter 4: Software support 4.3.2 ASUS SSD Caching II ASUS SSD Caching II uses installed SSDs for multi-caching of frequently accessed data or applications. It combines multiple SSDs’ performance and hard-drive capacity to boost the system’s overall performance. Launching ASUS SSD Caching II T o launch ASUS SSD Caching, click T ool > ASU[...]

ASUS P9X79-E WS 4-7 3. T o cancel caching, click . • During initialization, you can proceed with doing any system operations. Y ou can check the caching status later or wait for a pop-up message notifying that initialization is completed. • For regular usage, the SA T A6G_E12/E34 connectors are recommended for data drives. • After disabling S[...]

4-8 Chapter 4: Software support 4.3.3 Ai Charger+ This utility allows you to fast-charge your portable BC 1.1* mobile devices on your computer’s USB port three times faster than the standard USB devices**. • * Check your manufacturer if your USB device is a Battery Charging Specication 1.1 (BC 1.1) compliant or compatible device. • ** Actu[...]

ASUS P9X79-E WS 4-9 4.3.4 ASUS Update ASUS Update lays out the options for updating BIOS on your system. Update BIOS utility on your system or simply save the utility for later use just by following the directions on this convenient updating feature. Launching ASUS Update Afte r in stall ing AI Suit e II from the mothe rboar d su pport DVD, laun ch[...]

4-10 Chapter 4: Software support 4.3.5 DIGI+ Power Control DIGI+ PowerControl allows you to adjust VRM voltage and frequency modulation to enhance reliability and stability . It also provides the highest power efciency , generating less heat to longer component lifespan and minimize power loss. Afte r in stall ing AI Suit e II from the mothe rbo[...]

ASUS P9X79-E WS 4-1 1 • The actual performance boost may vary depending on your CPU specication. • Do not remove the thermal module. The thermal conditions should be monitored. DRAM Pow er Function no. Function description 1 DRAM Current Capability A higher value brings a wider total power range and extends the overclocking frequency range s[...]

4-12 Chapter 4: Software support 4.3.6 EPU EPU is an energy-efcient tool that satises different computing needs. This utility provides several modes that you can select to save system power . Selecting Auto mode will have the system shift modes automatically according to current system status. Y ou can also customize each mode by conguring[...]

ASUS P9X79-E WS 4-13 Refer to the software manual in the support DVD or visit the ASUS website at www .asus.com for detailed software conguration. 4.3.7 F AN Xpert+ F AN Xpe rt+ i ntell igent ly al lows you to ad just both the CPU a nd ch assis fan spee ds acco rdin g to differe nt am bien t tem perat ures cause d by differ ent c limat e co ndit[...]

4-14 Chapter 4: Software support 4.3.8 MyLogo2 This MyLogo utility lets you customize the boot logo. The boot logo is the image that appears on screen during the Power-On-Self-T ests (POST). Personalize your computer from the very beginning! Launching ASUS Update Afte r in stall ing AI Suit e II from the mothe rboar d su pport DVD, laun ch My Logo [...]

ASUS P9X79-E WS 4-15 2. Click on Auto T une to adjust image size compatibility or adjust the resolution bar . 3. Y ou can click on Booting Preview to preview the boot image. Then click Next. 4. Click on Flash to start updating the image to the boot logo. 5. Click on Y es to reboot or you can also see the new logo next time you restart your computer[...]

4-16 Chapter 4: Software support 4.3.9 Probe II Probe II is a utility that monitors the computer’s vital components, and detects and alerts you of any problem with these components. Probe II senses fan rotations, CPU temperature, and system voltages, among others. With this utility , you are assured that your computer is always at a healthy opera[...]

ASUS P9X79-E WS 4-17 4.3.10 T urboV EVO ASUS T urboV EVO introduces T urboV that allows you to manually adjust the CPU frequency and related voltages as well as Auto T uning function that offers automatic and easy overclocking and system level up. Af ter i nstal ling AI Su ite I I fro m the moth erbo ard s uppor t DVD, lau nch TurboV EVO b y cl ick[...]

4-18 Chapter 4: Software support Using Advanced Mode Click on the Advanced Mode tab to adjust the advanced voltage settings. Advanced mode Applies all changes immediately Undoes all changes without applying Click to restore all start-up settings Current values T arget values V oltage Adjustment bars CPU Ratio Allows you to manually adjust the CPU r[...]

ASUS P9X79-E WS 4-19 Auto T uning ASUS T urboV EVO includes two auto tuning modes, providing the most exible auto-tuning options. • The overclocking result varies with the CPU model and the system conguration. • T o prevent overheating from damaging the motherboard, a better thermal environment is strongly recommended. Fast T uning : fast[...]

4-20 Chapter 4: Software support 3. TurboV automatically overclocks the CPU, saves BIOS settings and restarts the system. After re-entering Windows, a message appears indicating auto tuning success. Click OK to exit. Using Extreme T uning 1. Click the Auto T uning tab and then click Extreme . 2. Read through the warning messages and click OK to sta[...]

ASUS P9X79-E WS 4-21 4.3.1 1 USB 3.0 Boost The ASUS exclusive USB 3.0 Boost provides speed boost for USB 3.0 devices and the up-to-date support of USB Attached SCSI Protocol (UASP). With USB 3.0 Boost, you can accelerate the transfer speed of your USB 3.0 devices with ease. Launching USB 3.0 Boost Afte r in stall ing AI Suit e II from the mothe rbo[...]

4-22 Chapter 4: Software support A. Realtek HD Audio Manager with DTS UltraPC II for Windows ® 7™ / Vista™ 4.3.12 Audio congurations The Realtek ® audio CODEC provides 8-channel audio capability to deliver the ultimate audio experience on your computer . The software provides Jack-Sensing function, S/PDIF Out support, and interrupt capabil[...]

ASUS P9X79-E WS 4-23 4.3.13 ASUS Dr . Power Utility ASUS Dr . Power is a monitoring utility that provides notications when the power supply is unable to provide sufcient power to the system. Y ou can choose to allow continuous notications or stop messages from appearing until the next time you reboot your computer . The utility is used to [...]

4-24 Chapter 4: Software support When ASUS Dr . Power detects that your system is running low on power , an event notication pops up to indicate that your power supply requires attention. The message will be displayed for 15 seconds or until you click the Close button. ASUS Dr . Power will notify you of the power status if the same conditions ar[...]

ASUS P9X79-E WS 4-25 4.4 RAID congurations The motherboard supports the following SA T A RAID solutions: • Intel ® Rapid Storage T echnology with RAID 0, RAID 1, RAID 10 and RAID 5 support. • Mavell ® RAID utility with RAID 0 and RAID 1 support. • Y ou must install Windows ® XP Service Pack 3 or later versions before using Serial A T A [...]

4-26 Chapter 4: Software support 4.4.2 Installing Serial A T A hard disks The motherboard supports Serial A T A hard disk drives. For optimal performance, install identical drives of the same model and capacity when creating a disk array . T o install the SA T A hard disks for a RAID conguration: 1. Install the SA T A hard disks into the drive b[...]

ASUS P9X79-E WS 4-27 Creating a RAID set T o create a RAID set: 1. From the utility main menu, select 1. Create RAID V olume and press <Enter>. The following screen appears: 2. Enter a name for the RAID set and press <Enter>. 3. When the RAID Level item is selected, press the up/down arrow key to select a RAID level to create, and then [...]

4-28 Chapter 4: Software support 5. Use the up/down arrow key to select a drive, and then press <Space> to select. A small triangle marks the selected drive. Press <Enter> after completing your selection. 6. Use the up/down arrow key to select the stripe size for the RAID array (for RAID 0, 10 and 5 only),and then press <Enter>. T[...]

ASUS P9X79-E WS 4-29 Deleting a RAID set T ake caution when deleting a RAID set. Y ou will lose all data on the hard disk drives when you delete a RAID set. T o delete a RAID set: 1. From the utility main menu, select 2. Delete RAID V olume and press <Enter>. The following screen appears: Exiting the Intel ® Rapid Storage T echnology Option [...]

4-30 Chapter 4: Software support 4.4.5 Marvell RAID utility The onboard Marvell SA T A 6.0 Gb/s controller allows you to create a RAID 0 or RAID 1 array using two SA T A hard disk drives. Refer to Chapter 2 of your motherboard user manual for the exact location of the Marvell SA T A 6.0 Gb/s connector . T o enter the Marvell utility , press <Ctr[...]

ASUS P9X79-E WS 4-31 4. Use the up or down arrow key to move the selection bar and press <Enter> to congure further RAID settings. RAID Level: Select a RAID Level. Conguration options: [RAID 0] [RAID 10] [RAID1] Stripe Size: Species the size of single data block on the virtual disk. In general, a larger stripe size is recommended for[...]

4-32 Chapter 4: Software support 6. Press <F10>. The following warning message appears: Press <Y> to save the RAID setting and exit the Marvell RAID utility . Do you want to exit from Marvell BIOS Setup? Y es N o Exit Delete an existing RAID Array 1. Select the RAID array to delete and press <Enter>. Select Delete and press <En[...]

ASUS P9X79-E WS 4-33 Do you want to delete this virtual disk ? Y es N o Delete Virtual Disk 2. The following warning message appears: Press <Y> to delete the selected RAID array . The following warning message appears: Do you want to delete MBR from this virtual disk ? Y es N o Delete MBR Press <Y> to delete the Master Boot Record (MBR)[...]

4-34 Chapter 4: Software support[...]

Chapter 5: Multiple GPU technology support[...]

ASUS P9X79-E WS Chapter summary 5 This chapter describes the motherboard features and the new technologies it supports. This chapter contains the following sections: 5.1 A TI ® CrossFireX™ technology .................................................................. 5-3 5.2 NVIDIA ® SLI™ technology ............................................[...]

ASUS P9X79-E WS 5-3 5.1 ATI ® CrossFireX™ technology The motherboard supports the A TI ® CrossFireX™ technology that allows you to install multi- graphics processing units (GPU) graphics cards. Follow the installation procedures in this section. 5.1.1 Requirements • In CrossFireX mode, you should have two identical CrossFireX-ready graphics[...]

5-4 Chapter 5: Multiple GPU technology support 5.1.3 Installing two CrossFireX™ graphics cards The following pictures are for reference only . The graphics cards and the motherboard layout may vary with models, but the installation steps remain the same. 1. Prepare two CrossFireX-ready graphics cards. 2. Insert the two graphics card into the PCIE[...]

ASUS P9X79-E WS 5-5 5. Connect two independent auxiliary power sources from the power supply to the two graphics cards separately . 6. Connect a VGA or a DVI cable to the graphics card. 5.1.4 Installing three CrossFireX™ graphics cards 1. Prepare three CrossFireX-ready graphics cards. 2. Insert the three graphics card into the PCIEX16 slots. If y[...]

5-6 Chapter 5: Multiple GPU technology support 5.1.5 Installing four CrossFireX™ graphics cards 1. Prepare four CrossFireX-ready graphics cards. 2. Insert the four graphics card into the PCIEX16 slots. Refer to Chapter 1 in this user manual for the locations of the PCIEX16 slots recommended for multi-graphics card installation. 3. Ensure that the[...]

ASUS P9X79-E WS 5-7 5.1.6 Installing the device drivers Refer to the documentation that came with your graphics card package to install the device drivers. Ensure that your PCI Express graphics card driver supports the AMD® CrossFireX™ technology . Download the latest driver from the AMD website (www.amd.com). 5.1.7 Enabling the AMD ® CrossFire[...]

5-8 Chapter 5: Multiple GPU technology support 1 Enabling Dual CrossFireX technology 1. In the Catalyst Control Center window , click Performance > AMD CrossFireX TM . 2. Select Enable CrossFireX TM . 3. Select a GPU combination from the drop-down list. 4. Click Apply to save and activate the GPU settings made. 2 3 4[...]

ASUS P9X79-E WS 5-9 5.2 NVIDIA ® SLI™ technology The motherboard supports the NVIDIA ® SLI™ (Scalable Link Interface) technology that allows you to install multi-graphics processing units (GPU) graphics cards. Follow the installation procedures in this section. 5.2.1 Requirements • In Dual SLI mode, you should have two identical SLI-ready g[...]

5-10 Chapter 5: Multiple GPU technology support 5.2.2 Installing two SLI-ready graphics cards The following pictures are for reference only . The graphics cards and the motherboard layout may vary with models, but the installation steps remain the same. Goldngers SLI bridge 1. Prepare two SLI-ready graphics cards. 2. Insert the two graphics card[...]

ASUS P9X79-E WS 5-1 1 5.2.3 Installing three SLI-ready graphics cards 3-Way SLI bridge 1. Prepare three SLI-ready graphics cards. 2. Insert the three graphics card into the PCIEX16 slots. If your motherboard has more than two PCIEX16 slots, refer to Chapter 2 in this user manual for the locations of the PCIEX16 slots recommended for multi-graphics [...]

5-12 Chapter 5: Multiple GPU technology support 5.2.4 Installing four SLI-ready graphics cards 1. Prepare four SLI-ready graphics cards. 2. Insert the four graphics card into the PCIEX16 slots. If your motherboard has more than two PCIEX16 slots, refer to Chapter 2 in this user manual for the locations of the PCIEX16 slots recommended for multi-gra[...]

ASUS P9X79-E WS 5-13 B1. If you cannot see the NVIDIA Control Panel item in step (A), select Screen Resolution . B2. From the Screen Resolution window, click Advanced settings . 5.2.5 Enabling the NVIDIA ® SLI™ technology After installing your graphics cards and the device drivers, enable the SLI feature in NVIDIA® Control Panel under the Windo[...]

5-14 Chapter 5: Multiple GPU technology support B3. The NVIDIA Control Panel window appears. Enabling SLI settings From the NVIDIA Control Panel window , select Congure SLI , Surround , PhysX . In the Quad-SLI enabled , click Maximize 3D Performance SLI to set the display for viewing SLI rendered content. When done, click Apply .[...]

ASUS P9X79-E WS 5-15 5.3 NVIDIA ® CUDA™ technology The motherboard supports the NVIDIA ® CUDA™ technology and up to 4 NVIDIA ® T esla™ computing processor cards(based on different type tesla cards), providing the optimum multi purpose computing performance. Follow the installation procedures in this section. 5.3.1 Requirements • 32/64-bi[...]

5-16 Chapter 5: Multiple GPU technology support 4. Refer to the documentation that came with your graphics card package to install the device drivers. 5. T o verify graphics card driver installation, right-click My Computer and select Properties from the menu. Click the Hardware tab, and then click Device Manager . Click the “+” sign before Dis[...]

ASUS contact information ASUST eK COMPUTER INC. Address 15 Li-T e Road, Peitou, T aipei, T aiwan 1 1259 T elephone +886-2-2894-3447 Fax +886-2-2890-7798 E-mail info@asus.com.tw Web site www .asus.com.tw T echnical Support T elephone +86-21-3842991 1 Online support support.asus.com ASUS COMPUTER INTERNA TIONAL (America) Address 800 Corporate Way , F[...]

EC Declaration of Conformity We, the undersigned, Manufacturer: ASUSTeK COMPUTER INC. Address, City: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN Country: TAIWAN Authorized representative in Europe: ASUS COMPUTER GmbH Address, City: HARKORT STR. 21-23, 40880 RATINGEN Country: GERMANY declare the following apparatus: Product name : Motherboard[...]