Asus Z97-WS инструкция обслуживания

Motherboard Z97-WS[...]

ii E9146 First Edition April 2014 Copyright© 2014 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser [...]

iii Contents Safety information ...................................................................................................... vi About this guide ........................................................................................................ vii Z97-WS specifications summary ........................................................[...]

iv Chapter 3: BIOS setup 3.1 Knowing BIOS ............................................................................................ 3-1 3.2 BIOS setup program .................................................................................. 3-2 3.2.1 EZ Mode...................................................................................... 3[...]

v 4.4.2 USB 3.0 Boost............................................................................. 4-8 4.4.3 EZ Update ................................................................................... 4-9 4.4.4 USB BIOS Flashback ................................................................ 4-11 4.4.5 USB Charger+ .............................[...]

vi Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all [...]

vii About this guide This user guide contains the information you need when installing and conguring the motherboard. How this guide is organized This guide contains the following parts: 1. Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports. It includes description of the swi[...]

viii Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task IMPORTANT: Instructio[...]

ix Z97-WS specifications summary CPU LGA1150 socket for the 4th Generation and New 4th Generation Intel ® Core™ i7/Intel ® Core™ i5/ Intel ® Core™ i3, Pentium ® and Celeron ® processors Supports Intel ® Turbo Boost Technology 2.0* * The Intel ® Turbo Boost Technology 2.0 support depends on the CPU types. Chipset Intel ® Z97 Express Ch[...]

x (continued on the next page) Z97-WS specifications summary Storage - 4 x SATA 6 Gb/s ports (gray) - Supports Intel ® Smart Response Technology, Intel ® Rapid Start Technology, Intel ® Smart Connect Technology** ASMedia ® SATA Express controller*** - 1 x SATA Express ports (black at top slot, compatible with 2 x SATA 6 Gb/s ports) ASMedia ® S[...]

xi ASUS Exclusive Features High Performance 5-Way Optimization by Dual Intelligent Processors 5 - Whole system optimization with a single click! 5-Way Optimization tuning key perfectly consolidates TPU, EPU, DIGI+ Power Control, Fan Xpert 3, and the whole new Turbo APP together, providing better CPU performance, efcient power saving, precise dig[...]

xii ASUS Exclusive Features Gaming Scenario Turbo APP - Featuring tuning system performance customization, network priority, and automatic audio scene congurations for selected applications Turbo LAN - Experience smooth online gaming with lower pings and less lags Q Stereo - Feel the sound power with different usage scenarios. Steam support - En[...]

xiii ASUS Quiet Thermal Solution Quiet Thermal Design - ASUS Fan Xpert 3 - ASUS Fanless Design: Heat-pipe solution ASUS Exclusive Overclocking Features Precision T weaker 2 - vCore: Adjustable CPU Core voltage at 0.001 V increment - iGPU: Adjustable CPU Graphics voltage at 0.001 V increment - vCCIO: Adjustable Analog and Digital I/O voltage at 0.00[...]

xiv Internal I/O connectors 4 x SATA 6Gb/s Connectors (4 x gray) 1 x 4-pin CPU Fan connector for both 3-pin (DC mode) and 4-pin (PWM mode) CPU coolers control* 1 x 4-pin CPU Optional Fan connector (CPU_OPT) 4 x 4-pin Chassis Fan connectors for 3-pin (DC mode) and 4-pin (PWM mode) coolers control 1 x Front panel audio connector (AAFP) 1 x S/PDIF out[...]

xv Package contents Check your motherboard package for the following items User Manual ASUS Z97-WS motherboard User manual Support DVD 8 x Serial ATA 6 Gb/s cables COM port bracket 1 x ASUS SLI™ bridge connector 1 x ASUS 4-Way SLI™ bridge connector 1 x ASUS 3-Way SLI™ bridge connector 1 x 2-in-1 Q-connector 1 x I/O Shield[...]

xvi Installation tools and components The tools and components in the table above are not included in the motherboard package. PC chassis Power supply unit Intel ® LGA1150 compatible CPU Fan Intel ® LGA1150 CPU DIMM SATA hard disk drive Graphics card Philips (cross) screwdriver SATA optical disc drive (optional) 1 bag of screws[...]

Z97-WS 1-1 Chapter 1 Product introduction 1 1.1 Special features 1.1.1 Product highlights LGA1150 socket for New 4th generation Intel ® Core™ i7/Intel ® Core™ i5/Intel ® Core™ i3, Pentium ® and Celeron ® processors This motherboard supports new 4th generation Intel ® Core™ i7/Intel ® Core™ i5/Intel ® Core™ i3, Pentium ® , and C[...]

1-2 Chapter 1: Product introduction Chapter 1 Dual-Channel DDR3 3400 (O.C) / 1600 / 1333 MHz Support The motherboard supports the dual-channel DDR3 memory that features data transfer rates of DDR3 3400 (O.C.)* / 1600 / 1333 MHz to boost the system’s performance, and to meet the higher bandwidth requirements of 3D graphics, multimedia and Internet[...]

Z97-WS 1-3 Chapter 1 Beat Thermal Chokes ASUS Beat Thermal Chokes deliver great durability, minimal power loss, and up to 93% power efciency under normal operation. A special n design results in 3-5 o C lower choke temperatures for added stability, which is increased exponentially by use of highly conductive and efcient gold-treated coatin[...]

1-4 Chapter 1: Product introduction Chapter 1 • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity. • Hold components by the edges [...]

Z97-WS 1-5 Chapter 1 Refer to 1.2.9 Internal connectors and 2.3.1 Rear I/O connection for more information about rear panel connectors and internal connectors. 1.2.2 Motherboard layout Z97-WS PCIEX16_1 PCIEX4_1 PCIEX16_2 PLX 8747 ICS 9DB433AGLF PCIEX16_3 Lithium Cell CMOS Power PCIEX16_4 AUDIO LAN1_USB3_12 LAN2_USB3_34 PCIEX1_1 PCIEX1_2 USB910 USB1[...]

1-6 Chapter 1: Product introduction Chapter 1 Layout contents Connectors/Jumpers/Buttons and switches/Slots Page 1. ATX power connectors (24-pin EATXPWR, 2 x 8-pin EATX12V) 2. CPU, CPU optional, and chassis fan connectors (4-pin CPU_FAN, 4-pin CPU_OPT, 4-pin CHA_FAN1-4 ) 3. LGA1150 CPU socket 4. CPU Over Voltage jumper (3-pin CPU_OV) 5. EPU switch [...]

Z97-WS 1-7 Chapter 1 1.2.3 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA1150 socket designed for the 4th Generation and the New 4th Generation Intel ® Core™ i7 / Intel ® Core™ i5 / Intel ® Core™ i3, Pentium ® , and Celeron ® processors. • Ensure that all power cables are unplugged before installing the CP[...]

1-8 Chapter 1: Product introduction Chapter 1 Recommended memory configurations 1.2.4 System memory The motherboard comes with eight DDR 3 (Double Data Rate 3) Dual Inline Memory Modules (DIMM) slots. A DDR3 module is notched differently from a DDR or DDR2 module. DO NOT install a DDR or DDR2 memory module to the DDR3 slot. Z97-WS Z97-WS 240-pin DD[...]

Z97-WS 1-9 Chapter 1 • You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel conguration. Any excess memory from the higher-sized channel is then mapped for single-channel operation. • According to Intel ® CPU spec, DIMM voltage below 1.65 V is recomme[...]

1-10 Chapter 1: Product introduction Chapter 1 1.2.5 Expansion slots Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. Slot No. Slot Description 1 PCIe 3.0/2.0 x16_1 slot 2 PCIe 2.0 x1_1 slot 3 PCIe 3.0/2.0 x16_2 slot 4 PCIe 2.0 x4 slot 5 PCIe 3.0/2.0x1[...]

Z97-WS 1-11 Chapter 1 • We recommend that you provide sufcient power when running CrossFireX™ or SLI™ mode. • Connect a chassis fan to the motherboard connector labeled CHA_FAN1-4 when using multiple graphics cards for better thermal environment. • We recommend you connect an EATX 12V_1 cable when running CrossFireX and SLI. Slot No. P[...]

1-12 Chapter 1: Product introduction Chapter 1 A B C D E F G H PCIe x16_1 shared – – – – – – – PCIe x16_2 – shared – – – – – – PCIe x16_3 shared – – – – – – – PCIe x16_4 – shared – – – – – – PCIe x4_1 shared – – – – – – – PCIe x1_1 shared – – – – – – – PCIe x1_2 sha[...]

Z97-WS 1-13 Chapter 1 1.2.6 Onboard buttons and switches Onboard buttons and switches allow you to ne-tune performance when working on a bare or open-case system. This is ideal for overclockers and gamers who continually change settings to enhance system performance. 1. Power-on button The motherboard comes with a power-on button that allows you[...]

1-14 Chapter 1: Product introduction Chapter 1 3. MemOK! button Installing DIMMs that are not compatible with the motherboard may cause system boot failure, and the DRAM_LED near the MemOK! button lights continuously. Press and hold the MemOK! button until the DRAM_LED starts blinking to begin automatic memory compatibility tuning for successful bo[...]

Z97-WS 1-15 Chapter 1 4. TPU switch With its two-level adjustment functions, the TPU allows you to automatically adjusts the CPU ratio and clock speed for an optimal system performance. • Enable this switch when the system is powered off. • When the TPU switch is set to Enabled (TPU_I: CPU Ratio Boost), the system automatically adjusts the CPU [...]

1-16 Chapter 1: Product introduction Chapter 1 5. EPU switch Enable this switch to automatically detect the current PC loadings and intelligently moderate the power consumption. Enable this switch when the system is powered off. • The EPU LED (OLED2) near the EPU switch lights up when the EPU switch is enabled. Refer to section 1.2.8 Onboard LEDs[...]

Z97-WS 1-17 Chapter 1 7. EZ XMP switch Enable this switch to overclock the installed DIMMs, allowing you to enhance the DIMM’s speed and performance. Z97-WS Z97-WS EZ_XMP switch Disable (Default) Enable EZ_XMP 8. ASUS Dr. POWER switch This switch allows you to enable or disable the ASUS Dr. Power feature. Install the bundled ASUS Dr. Power Utilit[...]

1-18 Chapter 1: Product introduction Chapter 1 1.2.7 Jumpers 1. CPU Over Voltage jumper (3-pin CPU_OV) The CPU Over Voltage jumper allows you to set a higher CPU voltage for a exible overclocking system, depending on the type of the installed CPU. To gain more CPU voltage setting, insert the jumper to pins 2-3. To go back to its default CPU volt[...]

Z97-WS 1-19 Chapter 1 2. TPU LED (TPU_LED) The TPU LED lights up when the TPU switch is enabled. Z97-WS Z97-WS TPU LEDs TPU_LED 3. EPU LED (OLED2) The EPU LED lights up when the EPU switch is enabled. Z97-WS Z97-WS EPU LED OLED2 4. Power LED (+12V_PWR LED) This LED lights up when you turn on the system using the Power-on button. Z97-WS Z97-WS +12V_[...]

1-20 Chapter 1: Product introduction Chapter 1 5. ASUS Dr. Power LED (DR_POWER LED) The ASUS Dr. Power LED near the ASUS Dr. Power switch lights up when the ASUS Dr. Power switch is on Enable. 6. PWR_SUPPLY LED The ASUS Dr. Power LED near the EATX PWR connector lights up when the ASUS Dr. Power switch setting is on and the power supply unit has fai[...]

Z97-WS 1-21 Chapter 1 7. EZ XMP LED (XLED1) This LED lights up when you enable the EZ XMP switch. Z97-WS Z97-WS XLED1 XLED1 8. Q-Code LEDs The Q-Code LED design provides you with a 2-digit error code that displays the system status. Refer to the Q-Code table on the next page for details. Z97-WS Q-Code LEDs Q_CODE1 Z97-WS Q_CODE2[...]

1-22 Chapter 1: Product introduction Chapter 1 Q-Code table Code Description 00 Not used 01 Power on. Reset type detection (soft/hard). 02 AP initialization before microcode loading 03 System Agent initialization before microcode loading 04 PCH initialization before microcode loading 06 Microcode loading 07 AP initialization after microcode loading[...]

Z97-WS 1-23 Chapter 1 Code Description E9 S3 Resume PPI not Found EA S3 Resume Boot Script Error EB S3 OS Wake Error EC – EF Reserved for future AMI error codes F0 Recovery condition triggered by rmware (Auto recovery) F1 Recovery condition triggered by user (Forced recovery) F2 Recovery process started F3 Recovery rmware image is found F4 [...]

1-24 Chapter 1: Product introduction Chapter 1 Code Description 9C USB Detect 9D USB Enable 9E – 9F Reserved for future AMI codes A0 IDE initialization is started A1 IDE Reset A2 IDE Detect A3 IDE Enable A4 SCSI initialization is started A5 SCSI Reset A6 SCSI Detect A7 SCSI Enable A8 Setup Verifying Password A9 Start of Setup AA Reserved for ASL [...]

Z97-WS 1-25 Chapter 1 ACPI/ASL Checkpoints (under OS) Code Description 03 System is entering S3 sleep state 04 System is entering S4 sleep state 05 System is entering S5 sleep state 30 System is waking up from the S3 sleep state 40 System is waking up from the S4 sleep state AC System has transitioned into ACPI mode. Interrupt controller is in PIC [...]

1-26 Chapter 1: Product introduction Chapter 1 1.2.9 Internal connectors 1. Intel ® Z97 Serial ATA 6 Gb/s connectors (7-pin SATA6G_1/6, SATAEXPRESS_1) These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s signal cables. If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10 conguration[...]

Z97-WS 1-27 Chapter 1 2. ASMedia ® Serial ATA 6 Gb/s connectors (7-pin SATA6G_E1, SATA6G_E2, SATAEXPRESS_E1) These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s signal cables. • ASMedia storage controller can only support AHCI mode. • These SATA ports are for data drives only. • The SATAEXPRESS_E1 connector c[...]

1-28 Chapter 1: Product introduction Chapter 1 4. Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector. • We recommend that you connect a high-deni[...]

Z97-WS 1-29 Chapter 1 6. Chassis Fan control setting (3-pin CHAFAN_SEL) These jumpers allow you to switch fan pin selection. The CHAFAN_SEL jumper is for the front fans and rear fans control. Set pins 1-2 when using 3-pin fans or pins 2-3 when using 4-pin fans. Z97-WS Z97-WS Chassis Fan control setting 1 2 2 3 3-pin DC FAN (Default) 4-Pin Force PWM[...]

1-30 Chapter 1: Product introduction Chapter 1 8. USB 3.0 connectors (20-1 pin USB3_E12, USB3_E34) These connectors allow you to connect a USB 3.0 module for additional USB 3.0 front or rear panel ports. With an installed USB 3.0 module, you can enjoy all the benets of USB 3.0 including faster data transfer speeds of up to 5 Gb/s, faster chargin[...]

Z97-WS 1-31 Chapter 1 DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! You can connect the front panel USB cable to the ASUS Q-Connector (USB) rst, and then install the Q-Connector (USB) to the USB connector onboard if your chassis supports front panel USB ports. The USB 2.0 module is purchased separately.[...]

1-32 Chapter 1: Product introduction Chapter 1 10. CPU, CPU optional, and chassis fan connectors (4-pin CPU_FAN, 4-pin CPU_OPT , 4-pin CHA_FAN1-4) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. • The CPU_FAN connector supports the CPU fan of maxi[...]

Z97-WS 1-33 Chapter 1 • For a fully congured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specication 2.0 (or later version) and provides a minimum power of 350 W. • DO NOT forget to connect the 4-pin/8-pin EATX12 V power plug. Otherwise, the system will not boot. • We recommend that you use a [...]

1-34 Chapter 1: Product introduction Chapter 1 • SystempowerLED(2-pinPLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode. • HarddiskdriveactivityLE[...]

Z97-WS 1-35 Chapter 1 13. DirectKey connector (2-pin DRCT) This connector is for the chassis-mounted button that supports the DirectKey function. Connect the button cable that supports DirectKey, from the chassis to this connector on the motherboard. Ensure that your chassis comes with the extra button cable that supports the DirectKey feature. Ref[...]

1-36 Chapter 1: Product introduction Chapter 1 15. M.2 socket 3 This socket allows you to install an M.2 (NGFF) SSD module. • This socket supports M Key and type 2260/2280 storage devices. • The M.2 Socket 3 shares bandwidth with SATAEXPRESS_1. Refer to section 3.6.3 PCH Storage Configuration of this user guide for more details. • When using [...]

Z97-WS 1-37 Chapter 1 17. Serial port connector (10-1 pin COM) This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis. The COM module is pur chased separately . Z97-WS Z97-WS Serial port (COM1) connector PIN 1 COM1 DCD TXD GND RTS[...]

1-38 Chapter 1: Product introduction Chapter 1[...]

Z97-WS 2-1 Chapter 2 Basic installation 2 2.1 Building your PC system 2.1.1 Motherboard installation The diagrams in this section are for reference only. The motherboard layout may vary with models, but the installation steps are the same for all models. 1. Install the ASUS Q-Shield to the chassis rear I/O panel. Chapter 2: Basic installation 2. Pl[...]

2-2 Chapter 2: Basic installation Chapter 2 3. Place nine screws into the holes indicated by circles to secure the motherboard to the chassis. DO NOT overtighten the screws! Doing so can damage the motherboard. Z97-WS[...]

Z97-WS 2-3 Chapter 2 2.1.2 CPU installation Ensure that you install the correct CPU designed for LGA1150 socket only. DO NOT install a CPU designed for LGA1155 and LGA1156 sockets on the LGA1150 socket.[...]

2-4 Chapter 2: Basic installation Chapter 2 2.1.3 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan, if necessary. To install the CPU heatsink and fan assembly[...]

Z97-WS 2-5 Chapter 2 To uninstall the CPU heatsink and fan assembly[...]

2-6 Chapter 2: Basic installation Chapter 2 To remove a DIMM 2.1.4 DIMM installation[...]

Z97-WS 2-7 Chapter 2 2.1.5 ATX Power connection OR[...]

2-8 Chapter 2: Basic installation Chapter 2 2.1.6 SATA device connection OR OR[...]

Z97-WS 2-9 Chapter 2 2.1.7 Front I/O Connector To install ASUS Q-Connector USB 2.0 AAFP To install USB 2.0 connector To install front panel audio connector USB 3.0 To install USB 3.0 connector HDD LED POWER SW RESET SW HDD LED- HDD LED+ PWR Reset Ground Ground HDD LED[...]

2-10 Chapter 2: Basic installation Chapter 2 2.1.8 Expansion Card installation To install PCIe x16 cards To install PCIe x1 cards[...]

Z97-WS 2-11 Chapter 2 2.2 BIOS update utility USB BIOS Flashback USB BIOS Flashback allows you to easily update the BIOS without entering the existing BIOS or operating system. Simply insert a USB storage device to the USB port (the USB port hole marked in white on the I/O shield) then press the USB BIOS Flashback button for three seconds to automa[...]

2-12 Chapter 2: Basic installation Chapter 2 6. Wait until the light goes out, indicating that the BIOS updating process is completed. For more BIOS update utilities in BIOS setup, refer to the section 3.11 Updating BIOS in Chapter 3. • Donotunplugportabledisk,powersystem,orpresstheCLR_CMOSbuttonwhile BIO[...]

Z97-WS 2-13 Chapter 2 2.3 Motherboard rear and audio connections 2.3.1 Rear I/O connection * and **: Refer to the tables on the next page for LAN port LEDs and audio port definitions. Rear panel connectors 1. Optical S/PDIF Out port 8. DisplayPort 2. HDMI port 9. eSATA port 3. USB 2.0 ports 5 and 6 10. USB BIOS Flashback button 4. Q-Code Logger but[...]

2-14 Chapter 2: Basic installation Chapter 2 • OnlyUSB3.0ports5and6supportAiCharger+function. • OnlyUSB2.0port6supportsUSBCharger+function • ThepluggedUSB3.0devicemayrunonxHCImodeorEHCImode,dependingonthe operating system’s setting. ?[...]

Z97-WS 2-15 Chapter 2 Connect to Headphone and Mic Connect to Stereo Speakers 2.3.2 Audio I/O connections Audio I/O ports ** Audio 2, 4, 6, or 8-channel configuration Port Headset 2-channel 4-channel 6-channel 8-channel Light Blue Line In Line In Line In Line In Lime Line Out Front Speaker Out Front Speaker Out Front Speaker Out Pink Mic In Mic In [...]

2-16 Chapter 2: Basic installation Chapter 2 Connect to 4.1 channel Speakers Connect to 5.1 channel Speakers Connect to 2.1 channel Speakers If you are using Windows 8.1 platform, use only the gray audio port for Side Speaker Out in a6-channelconguration.[...]

Z97-WS 2-17 Chapter 2 Connect to 7.1 channel Speakers When the DTS UltraPC II function is enabled, ensure to connect the rear speaker to the gray port. 2.4 Starting up for the first time 1. After making all the connections, replace the system case cover. 2. Ensure that all switches are off. 3. Connect the power cord to the power connector at the ba[...]

2-18 Chapter 2: Basic installation Chapter 2 BIOS Beep Description One short beep VGA detected Quick boot set to disabled No keyboard detected One continuous beep followed by two short beeps then a pause (repeated) No memory detected One continuous beep followed by three short beeps No VGA detected One continuous beep followed by four short beeps H[...]

Z97-WS 3-1 Chapter 3 The new ASUS UEFI BIOS is a Unied Extensible Interface that complies with UEFI architecture, offering a user-friendly interface that goes beyond the traditional keyboard- only BIOS controls to enable a more exible and convenient mouse input. You can easily navigate the new UEFI BIOS with the same smoothness as your operat[...]

3-2 Chapter 3: BIOS setup Chapter 3 • The BIOS setup screens shown in this section are for reference purposes only, and may not exactly match what you see on your screen. • Ensure that a USB mouse is connected to your motherboard if you want to use the mouse to control the BIOS setup program. • If the system becomes unstable after changing an[...]

Z97-WS 3-3 Chapter 3 3.2.1 EZ Mode By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ Mode provides you an overview of the basic system information, and allows you to select the display language, system performance mode and boot device priority. To access the Advanced Mode, click Exit/Advanced Mode , then select Ad[...]

3-4 Chapter 3: BIOS setup Chapter 3 3.2.2 Advanced Mode The Advanced Mode provides advanced options for experienced end-users to congure the BIOS settings. The gure below shows an example of the Advanced Mode. Refer to the following sections for the detailed congurations. To switch from EZ Mode to Advanced Mode, click Advanced Mode F7 or p[...]

Z97-WS 3-5 Chapter 3 Menu bar The menu bar on top of the screen has the following main items: My Favorites For saving the frequently-used system settings and conguration. Main For changing the basic system conguration Ai T weaker For changing the overclocking settings Advanced For changing the advanced system settings Monitor For displaying t[...]

3-6 Chapter 3: BIOS setup Chapter 3 Quick Note (F9) This button above the menu bar allows you to key in notes of the activities that you have done in BIOS. • The Quick Note function does not support the following keyboard functions: delete, cut, copy and paste. • You can only use the alphanumeric characters to enter your notes. Hot keys This bu[...]

Z97-WS 3-7 Chapter 3 3.2.3 QFan Control The QFan Control allows you to set a fan prole or manually congure the operating speed of your CPU and chassis fans. Click to select a fan to be configured Click to activate PWM Mode Click to undo the changes Click to apply the fan setting Click to go back to main menu Select a profile to apply to your [...]

3-8 Chapter 3: BIOS setup Chapter 3 Configuring fans manually Select Manual from the list of proles to manually congure your fans’ operating speed. To congure your fans: 1. Select the fan that you want to congure and to view its current status. 2. Click and drag the speed points to adjust the fans’ operating speed. 3. Click Apply to[...]

Z97-WS 3-9 Chapter 3 3.2.4 EZ Tuning Wizard EZ Tuning Wizard allows you to overclock your CPU and DRAM, computer usage, and CPU fan to their best settings. You can also easily set RAID in your system using this feature. Tuning your system settings To tune your settings: 1. Press <F11> on your keyboard or click from the BIOS screen to open EZ [...]

3-10 Chapter 3: BIOS setup Chapter 3 Creating RAID To create RAID: 1. Press <F11> on your keyboard or click from the BIOS screen to open EZ Tuning Wizard screen. 2. Click RAID then click Next . • Ensure that your HDDs have no existing RAID volumes. • Ensure to connect your HDDs to Intel ® SATA connectors. 3. Select the type of storage fo[...]

Z97-WS 3-11 Chapter 3 3.3 My Favorites MyFavorites is your personal space where you can easily save and access your favorite BIOS items.[...]

3-12 Chapter 3: BIOS setup Chapter 3 Adding items to My Favorites To add BIOS items: 1. Press <F3> on your keyboard or click from the BIOS screen to open Setup Tree Map screen. 2. On the Setup Tree Map screen, select the BIOS items that you want to save in MyFavorites screen. 3. Select an item from main menu panel, then click the submenu that[...]

Z97-WS 3-13 Chapter 3 3.4 Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings. Security The Security menu items allow you to change the system security se[...]

3-14 Chapter 3: BIOS setup Chapter 3 Administrator Password If you have set an administrator password, we recommend that you enter the administrator password for accessing the system. Otherwise, you might be able to see or change only selected elds in the BIOS setup program. To set an administrator password: 1. Select the Administrator Password [...]

Z97-WS 3-15 Chapter 3 To change a user password: 1. Select the User Password item and press <Enter>. 2. From the Enter Current Password box, key in the current password, then press <Enter>. 3. From the Create New Password box, key in a new password, then press <Enter>. 4. Conrm the password when prompted. To clear the user pass[...]

3-16 Chapter 3: BIOS setup Chapter 3 Ai Overclock Tuner [Auto] This item allows you to select the CPU overclocking options to achieve the desired CPU internal frequency. Select any of these preset overclocking conguration options: [Auto] Automatically optimizes the CPU ratio and BCLK frequency. [Manual] Loads the optimal settings for the system.[...]

Z97-WS 3-17 Chapter 3 ASUS MultiCore Enhancement [Auto] [Auto] This item allows you to maximize the oveclocking performance optimized by ASUS core ratio settings. [Disabled] This item allows you to set to default core ratio settings. CPU Core Ratio [Auto] This item allows you to set the CPU core ratio limit per core or synchronize automatically to [...]

3-18 Chapter 3: BIOS setup Chapter 3 Internal PLL Overvoltage [Auto] This item allows you to enable the internal PLL Overvoltage for K-SKU CPUs to get the extreme overclocking capability. Conguration options: [Auto] [Enabled] [Disabled] BCLK Frequency: DRAM Frequency Ratio [Auto] Allows you to set the BCLK Frequency to DRAM Frequency ratio mode.[...]

Z97-WS 3-19 Chapter 3 Primary Timings DRAM CAS# Latency [Auto] Conguration options: [Auto] [1] – [31] DRAM RAS# to CAS# Delay [Auto] Conguration options: [Auto] [1] – [31] DRAM RAS# PRE Time [Auto] Conguration options: [Auto] [1] – [31] DRAM RAS# ACT Time [Auto] Conguration options: [Auto] [1] – [63] DRAM Command Rate [Auto] Con[...]

3-20 Chapter 3: BIOS setup Chapter 3 DRAM RTL (CHA_R0D1) [Auto] Conguration options: [Auto] [1] - [63] DRAM RTL (CHA_R1D0) [Auto] Conguration options: [Auto] [1] - [63] DRAM RTL (CHA_R1D1) [Auto] Conguration options: [Auto] [1] - [63] DRAM RTL (CHB_R0D0) [Auto] Conguration options: [Auto] [1] - [63] DRAM RTL (CHB_R0D1) [Auto] Congura[...]

Z97-WS 3-21 Chapter 3 tWRRD_dd [Auto] Conguration options: [Auto] [1] - [15] tWRWR [Auto] Conguration options: [Auto] [1] - [7] tWRWR_dr [Auto] Conguration options: [Auto] [1] - [15] tWRWR_dd [Auto] Conguration options: [Auto] [1] - [15] Dec_WRD [Auto] Conguration options: [Auto] [0] [1] tRDWR [Auto] Conguration options: [Auto] [1[...]

3-22 Chapter 3: BIOS setup Chapter 3 Skew Control Changing subitems in this menu may enhance the DRAM overclocking capability and stability. Transmitter Rising Slope [Auto] Conguration options: [Auto] [0] – [31] Transmitter Falling Slope [Auto] Conguration options: [Auto] [0] – [31] Transmitter Control Time [Auto] Conguration options: [...]

Z97-WS 3-23 Chapter 3 VRM Spread Spectrum [Disabled] This item allows to enhance the system stability. Conguration options: [Disabled] [Enabled] Active Frequency Mode [Disabled] This item allows to enhance the power saving condition of your system. Conguration options: [Disabled] [Enabled] CPU Power Phase Control [Auto] This item allows you t[...]

3-24 Chapter 3: BIOS setup Chapter 3 Fixed DRAM Switching Frequency (KHz) [300] This item allows you to set a higher frequency for an increased overclocking range or a lower frequency for an enhanced system stability. Use the <+> or <-> to adjust the value. The values range from 300 KHz to 500 KHz with an interval of 50 KHz. DRAM Power [...]

Z97-WS 3-25 Chapter 3 CPU Internal Power Fault Control Thermal Feedback [Auto] Allows your system to take precautionary actions to protect the CPU when the thermal condition of the external regulator exceeds the threshold. Conguration options: [Auto] [Disabled] [Enabled] CPU Integrated VR Fault Management [Auto] Disable this item to prevent trip[...]

3-26 Chapter 3: BIOS setup Chapter 3 Power Fast Ramp Response [Auto] This item allows you to enhance the response of the CPU voltage regulator during the load transients. Use the <+> or <-> to adjust the value. The values range from 0.00 to 1.50. Conguration options: [Auto] [0.00] - [1.50] CPU Internal Power Saving Control Power Savi[...]

Z97-WS 3-27 Chapter 3 CPU Core Voltage Offset Use the <+> or <-> keys to adjust the value. The values range from 0.001 V to 0.999 V with a 0.001 V interval. The following item appears only when you set the CPU Core Voltage to [Adaptive Mode] . Additional Turbo Mode CPU Core Voltage [Auto] This item allows you to set the amount of voltag[...]

3-28 Chapter 3: BIOS setup Chapter 3 Total Adaptive Mode CPU Cache Voltage [Auto] This item sums up the voltages of the CPU Cache Voltage offset and Additional Turbo Mode CPU Cache Voltage options. CPU System Agent Voltage Offset Mode Sign [+] [+] To offset the voltage by a positive value. [–] To offset the voltage by a negative value. CPU System[...]

Z97-WS 3-29 Chapter 3 CPU Input Voltage [Auto] This item allows you to set an input voltage for the CPU by the external voltage regulator. By default, this item takes the standard value of the installed CPU. You can use the <+> or <-> keys to adjust the value. The values range from 0.800 V to 2.700 V with a 0.010 V interval. DRAM Voltag[...]

3-30 Chapter 3: BIOS setup Chapter 3 DRAM DATA REF Voltage on CHA/CHB [Auto] This item allows you to set the DRAM reference voltage on the data lines on Channels A and B. You can use the <+> or <-> keys to adjust the value. The values range from 0.39500x to 0.63000x with a 0.00500x interval. To set a value for the DRAM reference voltage[...]

Z97-WS 3-31 Chapter 3 3.6 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced menu items. Incorrect eld values can cause the system to malfunction.[...]

3-32 Chapter 3: BIOS setup Chapter 3 3.6.1 CPU Configuration The items in this menu show the CPU-related information that the BIOS automatically detects. The items in this menu may vary based on the CPU installed. Intel Adaptive Thermal Monitor [Enabled] This item allows you to protect the CPU by decreasing its frequency as it reaches the thermal t[...]

Z97-WS 3-33 Chapter 3 Execute Disable Bit [Enabled] Execute Disable prevents certain classes of malicious buffer overow attacks when combined with a supporting OS (SuSE Linux 9.2, RedHat Enterprise 3 Update 3). Conguration options: [Disabled] [Enabled] Intel Virtualization Technology [Enabled] When set to [Enabled] , a VMM can utilize the add[...]

3-34 Chapter 3: BIOS setup Chapter 3 CPU C-Status [Auto] This item allows you to set the power saving of the CPU states. Conguration options: [Auto] [Disabled] [Enabled] The following items appear only when you set the CPU C-Status to [Enabled] . Enhanced C1 state [Enabled] This item allows your CPU to reduce power consumption when the system is[...]

Z97-WS 3-35 Chapter 3 3.6.2 PCH Configuration PCI Express Configuration This item allows you to congure the PCI Express slots. PCIe Speed [Auto] This item allows your system to automatically select the PCI Express port speed. When set to [Gen1], the PCI-E port runs at PCI-E 1.0 speed. When set to [Gen2], the PCI-E port runs at PCI-E 2.0 speed. C[...]

3-36 Chapter 3: BIOS setup Chapter 3 Hybrid Hard Disk Support [Disabled] This item allows you to enable or disable the hybrid hard disk support for a faster resume time. Conguration options: [Enabled] [Disabled] Intel Smart Connect Technology This item allows the system to support Intel Smart Connect Technology, that periodically refreshes selec[...]

Z97-WS 3-37 Chapter 3 SATAExpress_1 SRIS Support [Auto] Conguration options: [Auto] [Disable] SATA Mode Selection [AHCI] This item allows you to set the SATA conguration. [Disabled] Disables the SATA function. [IDE Mode] Set to [IDE Mode] when you want to use the Serial ATA hard disk drives as Parallel ATA physical storage devices. [AHCI Mode[...]

3-38 Chapter 3: BIOS setup Chapter 3 3.6.4 System Agent Configuration CPU Display Audio [Enabled] This item allows you to enable or disable the CPU display audio support. Conguration options: [Enabled] [Disabled] Graphics Configuration This item allows you to select a primary display from CPU and PCIe graphical devices. Primary Display [Auto] Th[...]

Z97-WS 3-39 Chapter 3 NB PCIe Configuration This item allows you to congure the NB PCI Express settings. PCIEx16_1/4 Link Speed [Auto] This item allows you to congure the PCIEx16 speed for slots 1~4. Conguration options: [Auto] [Gen1] [Gen2] [Gen3] Memory Configuration This item allows you to congure the memory conguration parameters[...]

3-40 Chapter 3: BIOS setup Chapter 3 Intel xHCI Mode [Smart Auto] [Auto] The xHCI is automatically enabled and runs at USB 3.0 mode when the xHCI driver is installed in the operating system. [Smart Auto] Upon detection, the xHCI driver supports the USB 3.0 mode during both POST and operating system. [Enabled] Enables the xHCI controller. [Disabled][...]

Z97-WS 3-41 Chapter 3 PCIE Native Power Management [Disabled] This item allows you to enhance the power saving feature of PCI Express and perform ASPM operations in the operating system. Conguration options: [Disabled] [Enabled] The following item appears only when you set the PCI Express Native Power Management to [Enabled] . Native ASPM [Disab[...]

3-42 Chapter 3: BIOS setup Chapter 3 3.6.7 Onboard Devices Configuration Scroll down to view the other BIOS items. HD Audio Controller [Enabled] This item allows you to use the Azalia High Denition Audio Controller Conguration options: [Disabled] [Enabled] The following items appear only when you set the HD Audio Controller to [Enabled] . Fro[...]

Z97-WS 3-43 Chapter 3 PCI-EX4_1 Slot (black) Bandwidth [Enabled] [Auto] This item allows your system to run at X2 mode and disable the SATAEXPRESS_E1 when a PCI-E device is detected. SATAEXPRESS_ E1 is automatically enabled when no device is connected. [X2 mode] This item allows your system to run at X2 mode for system resource optimization with th[...]

3-44 Chapter 3: BIOS setup Chapter 3 Intel LAN Controller (LAN1-LAN2) [Enabled] This item allows you to enable or disable the Intel LAN1/2 controllers. Conguration options: [Disabled] [Enabled] The following item appears only when you set the Intel LAN Controller to [Enabled] . Intel PXE OPROM (LAN1-LAN2) [Disabled] This item allows you to enabl[...]

Z97-WS 3-45 Chapter 3 Restore AC Power Loss [Power Off] This item allows your system to go to ON state, OFF state, or both states after an AC power loss. When setting your system to [Last State], it goes to the previous state before the AC power loss. Conguration options: [Power Off] [Power On] [Last State] Power On By PCI-E [Disabled] This item[...]

3-46 Chapter 3: BIOS setup Chapter 3 3.7 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. Scroll down to display the other BIOS items. Qfan Tuning Click this item to automatically detect the lowest speed and congure the minimum duty cycle for each fan. CPU Temperature / MB Tem[...]

Z97-WS 3-47 Chapter 3 CPU Q-Fan Control [Auto] [Auto] Detects the type of CPU fan installed and automatically switch the control modes. [PWM mode] Enables the CPU Q-Fan control in PWM mode for 4-pin CPU fan. [DC mode] Enables the CPU Q-Fan control in DC mode for 3-pin CPU fan. [Disabled] Disables the CPU Q-Fan control feature. The following items a[...]

3-48 Chapter 3: BIOS setup Chapter 3 CPU Fan Min. Duty Cycle(%) [60] Use the <+> or <-> keys to adjust the minimum CPU fan duty cycle. The values range from 20% to 100%. When the CPU temperature is under 40ºC, the CPU fan operates at the minimum duty cycle. Chassis Fan 1/4 Q-Fan Control 1/4 [DC Mode] These items allow you to set the ch[...]

Z97-WS 3-49 Chapter 3 Chassis Fan 1/4 Lower Temperature [40] Use the <+> or <-> keys to adjust the chassis fans’ lower temperature. The values range from 40 ° C to 75 ° C.. Chassis Fan 1/4 Min. Duty Cycle(%) [60] Use the <+> or <-> keys to adjust the minimum chassis fan duty cycle. The values range from 60% to 100%. When[...]

3-50 Chapter 3: BIOS setup Chapter 3 3.8 Boot menu The Boot menu items allow you to change the system boot options. Boot Configuration Fast Boot [Enabled] [Disabled] This item allows your system to go back to its normal boot speed. [Enabled] This item allows your system to accelerate the boot speed. The following items appear only when you set the [...]

Z97-WS 3-51 Chapter 3 Network Stack Driver Support [Disabled] [Disabled] Select to skip the network stack driver from loading during POST. [Enabled] Select to load the network stack driver during POST. Next Boot after AC Power Loss [Normal Boot] [Normal Boot] Returns to normal boot on the next boot after an AC power loss. [Fast Boot] Accelerates th[...]

3-52 Chapter 3: BIOS setup Chapter 3 Option ROM Messages [Enabled] [Enabled] The third-party ROM messages will be displayed during POST. [Disabled] Disables the ROM messages and displays only the ASUS logo during POST. Interrupt 19 Capture [Disabled] This item allows you to trap Interrupt 19 by the option ROMs. Conguration options: [Disabled] [E[...]

Z97-WS 3-53 Chapter 3 Boot from Storage Devices [Legacy OpROM first] This item allows you to select the type of storage devices that you want to launch. Conguration options: [Both, Legacy OpROM rst] [Both, UEFI rst] [Legacy OpROM rst] [UEFI driver rst] [Ignore] Boot from PCI-E/PCI Expansion Devices [Legacy OpROM first] This item allo[...]

3-54 Chapter 3: BIOS setup Chapter 3 KEK Management The KEK (Key-exchange Key or Key Enrollment Key) manages the Signature database (db) and Revoked Signature database (dbx). Key-exchange Key (KEK) refers to Microsoft ® Secure Boot Key-Enrollment Key (KEK). Delete KEK Allows you to delete the KEK from your system. Once the KEK is deleted, the db a[...]

Z97-WS 3-55 Chapter 3 dbx Management The dbx (Revoked Signature database) lists the forbidden images of db items that are no longer trusted and cannot be loaded. Delete the dbx Allows you to delete the DBX le from your system. Doing so may expose the system to security threats. Load Default dbx Select Yes to load the system default dbx or select[...]

3-56 Chapter 3: BIOS setup Chapter 3 3.9 Tool menu The Tool menu items allow you to congure options for special functions. Select an item then press <Enter> to display the submenu. Setup Animator This item allows you to enable or disable the Setup animator. Conguration options: [Disabled] [Enabled] 3.9.1 ASUS EZ Flash 2 Utility This ite[...]

Z97-WS 3-57 Chapter 3 Load from Profile This item allows you to load the previous BIOS settings saved in the BIOS Flash. Key in the prole number that saved your BIOS settings, press <Enter>, and then select Yes . • DO NOT shut down or reset the system while updating the BIOS to prevent the system boot failure! • We recommend that you u[...]

3-58 Chapter 3: BIOS setup Chapter 3 3.9.3 ASUS DRAM SPD Information This item allows you to view the DRAM SPD information.[...]

Z97-WS 3-59 Chapter 3 3.10 Exit menu The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. You can access the EZ Mode from the Exit menu. Load Optimized Defaults This option allows you to load the default values for each of the parameters on the Setup menus. When you[...]

3-60 Chapter 3: BIOS setup Chapter 3 3.11 Updating BIOS The ASUS website publishes the latest BIOS versions to provide enhancements on system stability, compatibility,and performance. However, BIOS updating is potentially risky. If there is no problem using the current version of BIOS, DO NOT manually update the BIOS. Inappropriate BIOS updating ma[...]

Z97-WS 3-61 Chapter 3 3.11.2 ASUS EZ Flash 2 ASUS EZ Flash 2 allows you to update the BIOS without having to use a bootable oppy disk or an OS-based utility. Before you start using this utility, download the latest BIOS from the ASUS website at www.asus.com. To update the BIOS using EZ Flash 2: 1. Insert the USB ash disk that contains the lat[...]

3-62 Chapter 3: BIOS setup Chapter 3 • This function can support devices such as a USB ash disk with FAT 32/16 format and single partition only. • DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure! Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load [...]

Z97-WS 3-63 Chapter 3 3.11.4 ASUS BIOS Updater ASUS BIOS Updater allows you to update the BIOS in DOS environment. The screen captures used in this section are for reference only and may not be exactly the same as actually shown on your computer screen. Before updating BIOS • Prepare the motherboard support DVD and a USB ash drive. • Downloa[...]

3-64 Chapter 3: BIOS setup Chapter 3 ASUSTeK BIOS Updater for DOS V1.30 [2014/01/01] Current ROM BOARD: Z97-DELUXE VER: 0210 (H :00 B :00) DATE: 02/12/2014 Update ROM BOARD: Unknown VER: Unknown DATE: Unknown PATH: C: C: D: FORMAN~1 <DIR> Z97-DE~1.CAP 8390626 2014-02-10 21:14:34 Note [Enter] Select or Load [Tab] Switch [V] Drive Info [Up/Dow[...]

Z97-WS 3-65 Chapter 3 5. Select Yes then press <Enter>. When BIOS update is done, press <ESC> to exit BIOS Updater. 6. Restart your computer. DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure. Ensure to load the BIOS default settings to ensure system compatibility and stability. Select Load Opti[...]

3-66 Chapter 3: BIOS setup Chapter 3[...]

Z97-WS 4-1 Chapter 4 Software support 4 4.1 Installing an operating system • Thismotherboardsupports32-bit/64-bitWindows ® 7,32-bit/64-bitWindows ® 8,and 32-bit/64-bitWindows ® 8.1operatingsystems(OS). • Motherboardsettingsandhardwareoptionsvary.Thesetupprocedures?[...]

4-2 Chapter 4: Software support Chapter 4 The Drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to use the devices. The Utilities menu shows the applications and other software that the motherboard supports. The AHCI/RAID Driver menu contains the RAID/AHCI driver disk. The Manual [...]

Z97-WS 4-3 Chapter 4 4.2.2 Obtaining the software manuals ThesoftwaremanualsareincludedinthesupportDVD.Followtheinstructionsbelowtoget thenecessarysoftwaremanuals. ThesoftwaremanuallesareinPortableDocumentFormat(PDF).InstalltheAdobe® Acrobat ® Reade[...]

4-4 Chapter 4: Software support Chapter 4 4.3 Software information MostoftheapplicationsinthesupportDVDhavewizardsthatwillconvenientlyguideyou throughtheinstallation.Viewtheonlinehelporreadmelethatcamewiththesoftware applicationformoreinformation. [...]

Z97-WS 4-5 Chapter 4 Launching AI Suite 3 Windows ® 7 OS FromtheDesktop,clickortap Start > All Programs > ASUS > AI Suite 3 > AI Suite 3 . YoucanalsolaunchAISuiteinWindows ® 7byclickingortapping ontheNotication area. Windows ® 8 and Windows ® 8.1 OS Tolaunch?[...]

4-6 Chapter 4: Software support Chapter 4 AI Suite 3 main menu bar System Information USB 3.0 Boost Ai Charger+ EZ Update USB Charger+ USB BIOS Flashback Dual Intelligent Processors 5 AI Suite 3 Main menu TheAISuite3mainmenugivesyoueasy-accesscontrolsandinsighttowhat’sgoingon withyourcomputer?[...]

Z97-WS 4-7 Chapter 4 4.4.1 Ai Charger+ AiCharger+allowsyoutofast-chargeyourportableBC1.1*mobiledevicesonyour computer’sUSBportthreetimesfasterthanthestandardUSBdevices**. Launching Ai Charger+ TolaunchAiCharger+,clickortap onthetop-rightcorner[...]

4-8 Chapter 4: Software support Chapter 4 4.4.2 USB 3.0 Boost USB3.0BoosttechnologysupportsUASP(USBAttachedSCSIProtocol)thatautomatically speedsupthetransferratesofyourUSBstoragedevices. Launching USB 3.0 Boost TolaunchUSB3.0Boost,clickortap onthetop-rig[...]

Z97-WS 4-9 Chapter 4 4.4.3 EZ Update EZUpdateisautilitythatallowsyoutoautomaticallyupdateyourmotherboard’ssoftware, driversandBIOSeasily. Withthisutlity,youcanalsomanuallyupdatetheBIOSandselectthebootlogothatdisplays duringPOST. Launching EZ U[...]

4-10 Chapter 4: Software support Chapter 4 Manually update the BIOS and selecting a boot logo Click or tap to search an image file for your boot logo Click or tap to go back to EZ Update main screen Click or tap to proceed the updating BIOS and boot logo Afteryouclickortap BIOS Update button,clickortap Flash toup[...]

Z97-WS 4-11 Chapter 4 4.4.4 USB BIOS Flashback USBBIOSFlashbackallowsyoutocheckandsavethelatestBIOSversiontoaUSB storagedevice.UsethisutilitytoquicklycheckforthelatestavailableBIOSandsettheBIOS downloadschedule. Launching USB BIOS Flashback Tola[...]

4-12 Chapter 4: Software support Chapter 4 Downloading the latest BIOS Beforeyoustartdownloading,ensurethatyouhaveinstalledtheUSBstoragedeviceto yourcomputer’sUSBportthatsupportsUSBBIOSFlashback.Refertosection 2.3.1 Rear I/O connection ofthisuserguidefor?[...]

Z97-WS 4-13 Chapter 4 4.4.5 USB Charger+ USBCharger+allowsyoutoquick-chargeyourportableUSBdevicesevenifyourcomputer isoff,insleepmodeorhibernatemode. BeforeusingUSBCharger+,ensuretodisabletheErPReadyitemfromthe Advanced > APM > ErP Ready i[...]

4-14 Chapter 4: Software support Chapter 4 4.4.6 Push Notice Thisutilityallowsyougetthedetailedstatusofyoursystemtoyoursmartdevice.Youcan alsosendmessagestoyoursmartdeviceusingthisutility. Beforeusingthisutility,ensurethatyoupairyourcomputerw[...]

Z97-WS 4-15 Chapter 4 Setting up PC Mode alerts of your computer Thisfeatureallowsyoutorestart,shutdown,orputyourcomputertosleepmodeandsends analerttoyoursmartdevice. Tick these to enable mode alerts Set the day and time to enable the PC modes Set the minutes to send the alert bef[...]

4-16 Chapter 4: Software support Chapter 4 Viewing your computer status on your smart device Tap Push Notice onyoursmartdevicetolaunchPushNotice. Sending messages to your smart device Thisfeatureallowsyoutosendmessagestoyoursmartdevice. YoucanalsosendmessagesviathePush[...]

Z97-WS 4-17 Chapter 4 4.4.7 System Information Thisutilityallowsyougetthedetailedinformationofthemotherboard,CPU,andmemory settings. Launching the System Information TolaunchSystemInformation,clickortap onthetop-rightcorneroftheAISuite3 mainmenu,then?[...]

4-18 Chapter 4: Software support Chapter 4 4.5 Audio configurations TheRealtek ® audioCODECprovides8-channelaudiocapabilitytodelivertheultimateaudio experienceonyourcomputer.ThesoftwareprovidesJack-Sensingfunction,S/PDIFOut support,andinterruptcapability.TheCODE[...]

Z97-WS 4-19 Chapter 4 A. Realtek ® HD Audio Manager with DTS UltraPC II for Windows ® 8.1 / Windows ® 8 / Windows ® 7 Configuration option tabs (vary with the audio devices connected) Advanced settings Set default device button Control settings panel Analog and digital connector status[...]

4-20 Chapter 4: Software support Chapter 4 4.6 ASUS Dr. Power Utility ASUSDr.Powerisamonitoringutilitythatprovidesnoticationswhenthepowersupply isunabletoprovidesufcientpowertothesystem.Youcanchoosetoallowcontinuous noticationsorstopmessagesf[...]

Z97-WS 4-21 Chapter 4 WhenASUSDr.Powerdetectsthatyoursystemisrunninglowonpower,anevent noticationpopsuptoindicatethatyourpowersupplyrequiresattention.Themessagewill bedisplayedfor15secondsoruntilyouclicktheClosebutton.ASUS?[...]

4-22 Chapter 4: Software support Chapter 4[...]

Z97-WS 5-1 Chapter 5 RAID support 5 5.1 RAID configurations The motherboard supports Intel ® Rapid Storage Technology with RAID 0, RAID 1, RAID 10, and RAID 5 solution. If you want to install a Windows ® operating system to a hard disk drive included in a RAID set, you have to create a RAID driver disk and load the RAID driver during OS installat[...]

5-2 Chapter 5: RAID congurations Chapter 5 5.1.2 Installing Serial ATA hard disks The motherboard supports Serial ATA hard disk drives. For optimal performance, install identical drives of the same model and capacity when creating a disk array. To install the SATA hard disks for a RAID conguration: 1. Install the SATA hard disks into the driv[...]

Z97-WS 5-3 Chapter 5 5.1.4 Intel ® Rapid Storage Technology Option ROM utility To enter the Intel ® Rapid Storage Technology Option ROM utility: 1. Turn on the system. 2. During POST, press <Ctrl> + <I> to display the utility main menu. The navigation keys at the bottom of the screen allow you to move through the menus and select the [...]

5-4 Chapter 5: RAID congurations Chapter 5 Creating a RAID set To create a RAID set: 1. From the utility main menu, select 1. Create RAID Volume and press <Enter>. The following screen appears: 2. Enter a name for the RAID set and press <Enter>. 3. When the RAID Level item is selected, press the up/down arrow key to select a RAID lev[...]

Z97-WS 5-5 Chapter 5 5. Use the up/down arrow key to select a drive, and then press <Space> to select. A small triangle marks the selected drive. Press <Enter> after completing your selection. 6. Use the up/down arrow key to select the stripe size for the RAID array (for RAID 0, 10 and 5 only),then press <Enter>. The available str[...]

5-6 Chapter 5: RAID congurations Chapter 5 Deleting a RAID set Be cautious when deleting a RAID set. You will lose all data on the hard disk drives when you delete a RAID set. To delete a RAID set: 1. From the utility main menu, select 2. Delete RAID Volume and press <Enter>. The following screen appears: 2. Use the up/down arrow key to se[...]

Z97-WS 5-7 Chapter 5 Exiting the Intel ® Rapid Storage Technology Option ROM utility To exit the utility: 1. From the utility main menu, select 5. Exit , then press <Enter>. The following warning message appears: 2. Press <Y> to exit or press <N> to return to the utility main menu. 5.2 Creating a RAID driver disk A oppy disk w[...]

5-8 Chapter 5: RAID congurations Chapter 5 5.2.2 Creating a RAID driver disk in Windows ® To create a RAID driver disk in Windows ® : 1. Start Windows ® . 2. Plug the USB oppy disk drive and insert a oppy disk. 3. Place the motherboard support DVD into the optical drive. 4. Go to the Intel AHCI/RAID Driver menu then click Intel AHCI/RAI[...]

Z97-WS 6-1 Chapter 6 Multiple GPU support 6 6.1 AMD ® CrossFireX™ technology The motherboard supports the AMD ® CrossFireX™ technology that allows you to install multi-graphics processing units (GPU) graphics cards. Follow the installation procedures in this section. 6.1.1 Requirements • In Dual CrossFireX mode, you should have two ident[...]

6-2 Chapter 6: Multiple GPU support Chapter 6 6.1.3 Installing two CrossFireX™ graphics cards The following pictures are for reference only. The graphics cards and the motherboard layout may vary with models, but the installation steps remain the same. 1. Prepare two CrossFireX-ready graphics cards. 2. Insert the two graphics card into the PCIEX1[...]

Z97-WS 6-3 Chapter 6 5. Connect two independent auxiliary power sources from the power supply to the two graphics cards separately. 6. ConnectaVGAoraDVIcabletothe graphics card. 6.1.4 Installing three CrossFireX™ graphics cards 1. Prepare three CrossFireX-ready graphics cards. 2. Insert the three graphics card into t[...]

6-4 Chapter 6: Multiple GPU support Chapter 6 6.1.5 Installing four CrossFireX™ graphics cards 1. Prepare four CrossFireX-ready graphics cards. 2. Insert the four graphics cards into the PCIEX16 slots. Refer to Chapter 1 in this user manual for the locations of the PCIEX16 slots recommended for multi-graphics card installation. 3. Ensure that the[...]

Z97-WS 6-5 Chapter 6 6.1.6 Installing the device drivers Refer to the documentation that came with your graphics card package to install the device drivers. Ensure that your PCI Express graphics card driver supports the AMD® CrossFireX™ technology. Download the latest driver from the AMD website (www.amd.com). 6.1.7 Enabling the AMD ® CrossFire[...]

6-6 Chapter 6: Multiple GPU support Chapter 6 Enabling Dual CrossFireX technology 1. IntheAMDVisionEngineControlCenterwindow,click Performance > AMD CrossFireX TM . 2. Select Enable CrossFireX TM . 3. Select a GPU combination from the drop-down list. 4. Click Apply to save and activate the GPU settings made. 1 2 3 4[...]

Z97-WS 6-7 Chapter 6 6.2 NVIDIA ® SLI™ technology ThemotherboardsupportstheNVIDIA ® SLI™ (Scalable Link Interface) technology that allows you to install multi-graphics processing units (GPU) graphics cards. Follow the installation procedures in this section. 6.2.1 Requirements • InSLImode,youshouldhavetwo[...]

6-8 Chapter 6: Multiple GPU support Chapter 6 4. AlignandrmlyinserttheSLIbridgeconnectortothegoldngersoneachgraphics card.Ensurethattheconnectorisrmlyinplace. 5. Connect two independent auxiliary power sources from the power supply to the two graphics cards separately. 6.[...]

Z97-WS 6-9 Chapter 6 4. Alignandrmlyinsertthe3-waySLI bridgeconnectortothegoldngerson each graphics card. Ensure that the connectorisrmlyinplace. 5. Connect three independent auxiliary power sources from the power supply to the three graphics cards separately. 6. ConnectaVGA[...]

6-10 Chapter 6: Multiple GPU support Chapter 6 6.2.6 Enabling the NVIDIA ® SLI™ technology Afterinstallingyourgraphicscardsandthedevicedrivers,enabletheSLIfeatureinNVIDIA ® ControlPanelundertheWindows ® 7operatingsystem. Launching the NVIDIA Control Panel Youcanlaunchthe?[...]

Z97-WS 6-11 Chapter 6 B2. From the Screen Resolution window, click Advanced settings . B3. TheNVIDIAControlPanelwindow appears. Enabling SLI settings FromtheNVIDIAControlPanelwindow, select Configure SLI , Surround , PhysX . In the Quad-SLI enabled , click Maximize 3D Performance SLI to set the display for viewin[...]

6-12 Chapter 6: Multiple GPU support Chapter 6[...]

ASUS Z97-WS A-1 Appendices Appendices Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received including interference that may cause unde[...]

A-2 Appendices Appendices IC: Canadian Compliance Statement ComplieswiththeCanadianICES-003ClassBspecications.ThisdevicecomplieswithRSS 210 of Industry Canada. This Class B device meets all the requirements of the Canadian interference-causing equipment regulations. This device complies with Industry Canada[...]

ASUS Z97-WS A-3 Appendices REACH Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm. DO NOT throw the motherboard in municipal waste. This product has been designed t[...]

A-4 Appendices Appendices Bluetooth Industry Canada Statement This Class B device meets all requirements of the Canadian interference-causing equipment regulations. Cet appareil numérique de la Class B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. NCC: Taiwan Wireless Statement Japan RF Equipment Statement KC ([...]

ASUS Z97-WS A-5 Appendices ASUS contact information ASUSTeK COMPUTER INC. Address 15 Li-Te Road, Peitou, Taipei, Taiwan 11259 Telephone +886-2-2894-3447 Fax +886-2-2890-7798 E-mail info@asus.com.tw Web site www.asus.com.com/ Technical Support Telephone +86-21-38429911 Fax +86-21-5866-8722, ext. 9101# Online support http://www.asus.com/tw/support/ A[...]

A-6 Appendices Appendices[...]