AT&T 7700 инструкция обслуживания

This cordless telephone operates at the maximum power allowed by the Federal Communications Commission (FCC). Even so, the handset and base can communicate over only a certain distance — which can vary with the locations of the base and hand- set, the weather , and the construction of your home or office. If the handset is moved to a point where [...]

INST ALLA TION Modular Jack PULSE/TONE Switch T elephone Line Cor d Power Cor d FOR T ABLE/DESK INST ALLA TION 1 Choose a spot near an electrical outlet and a telephone jack. This phone requires a modular telephone jack and a standard electrical outlet (1 10v AC). 2 Install the handset battery . For an illustration of battery installation, see BA T[...]

FOR W ALL INST ALLA TION The wall mounting bracket is a wedged, triangular plastic piece attached to the bottom of the base. Y ou'll need to attach this piece so the thickest end of the bracket is facing the floor when you wall-mount the base. 1 Remove the mounting bracket. Push in on the two tabs at the lar ge end of the triangular mounting b[...]

Making a Call 1 Press P , and wait for the PHONE light to go on steadily . 2 When you hear a dial tone, dial the number . (For information about the Display Dial feature, see the CALLER ID section of this manual). Answering a Call Press P . The PHONE light goes on, and the call is connected. Ending a Call T o end a call, place the handset into the [...]

# OPERA TION Timer The screen displays the elapsed time of the call in hours, min- utes and seconds (up to 9 hours, 59 minutes, 59 seconds). The timer appears on the screen fifteen seconds after the last digit is dialed, and remains on the screen for the duration of the call. Flash Press F to activate custom-calling services such as Call W aiting o[...]

This cordless phone can store 20 telephone numbers and names that you dial just by pressing p and two of the number buttons. The telephone memory works with the Memory Match and Priority Ring features. When you receive a call from a number you’ve stored in memory , the screen displays the name information as you’ve stored it, not as the service[...]

Storing a Pause in a Memory Dial Number When storing a number in memory , press and hold down the number button that comes before the pause, until you hear the second beep. This inserts a 2-second pause after that digit. If you hold the number button down longer , you will hear more beeps as additional pauses are stored. NOTE: Each pause you stor e[...]

CALLER ID OPERA TION Caller's telephone number Caller's name V oice mail message waiting (with paid service of telephone company voice mail) New call information in call history since you last r eviewed This telephone number has been stor ed as a VIP Battery status indicator About Caller Identification This telephone is designed to store [...]

Program Area Codes Y ou must program the system to recognize your home area code in order to use the Display Dial feature described later in this section. After programming your home area code, the screen displays the 7 digits of the number (without the area code) when you receive a call from this area code. When you use the Display Dial feature, t[...]

Charging the Handset Batter y Pack The batteries need charging when: • The phone beeps four times when you press P . • The battery icon is empty on the handset screen. • The phone does not respond when you press P , and no lights go on. Place the handset face up or face down in the base so the CHARGING light goes on. (If you have wall-mounted[...]

IN CASE OF DIFFICUL TY If you have difficulty operating this phone, try the suggestions below . If you still have trouble, call 1 800 722-9125. If the phone does not work at all, check these items first • Make sure the power cord is plugged into the base and an electrical outlet. • Make sure the telephone line cord is plugged firmly into the ba[...]

IN CASE OF DIFFICUL TY The caller's name or phone number is not displayed during Call Waiting • Make sure you subscribe to the combined Caller ID service with Call W aiting. • The screen will not display the call information if someone is on an extension phone. Display Dial feature does not work • Check to make sure you have stored your [...]