Audiovox NVX430 инструкция обслуживания

User Manual GPS navigation software for Audiovox NVX430BT English Owners manual :128-8226 VER : 00[...]

Copyright note Audiovox Electronics Corp. 150 Marcus Blvd., Hauppauge, NY 11788 Call center: 800 290 6650 The product and the information contained herein may be changed at any time without prior notification. This manual or any parts of it may not be reproduced, transmitted in any form either electronically or mechanically (including photocopying)[...]

Thank you for choosing the NVX430BT Navi gator as your door-to-door in-car navigator. The memory card version is very easy to use. Read the Quick Start Guide first and start using The NVX430BT Naviga tor right away. This document is the detailed description of the software. Alt hough The NVX430BT Navigator can easily be discovered by experience, it[...]

Table of contents 1 .... Warnings and safety information 8 2 .... General information 9 3 .... Operating The NVX430BT Navigator (Controls) 10 3.1 Hardware buttons .................................................................... 10 3.2 Screen buttons and controls .................................................. 12 3.2.1 Direct selectors ......[...]

4.4.10.3 The active leg of the route ............................................................ 26 4.4.10.4 Inactive legs of the route .............................................................. 26 4.4.10.5 Roads in the route excl uded by your preferences ........................ 27 4.5 Screens with map ........................................[...]

5 .... Settings 52 5.1 General settings ....................................................................... 52 5.1.1 Safety Mode ........................................................................................ 52 5.1.2 Set Favorite Destinations .................................................................... 53 5.1.3 Automatic Night[...]

5.6.1.4 Coordinate display format ............................................................ 64 5.6.1.5 Cockpit layout .............................................................................. 64 5.6.2 Backlight settings ................................................................................ 64 5.6.2.1 Power management .............[...]

1 W a rnings and safety information The NVX430BT Navigator is a na vigation system that helps y ou find your way to your selected destination. It will determine your exact location with the help of an attached GPS device. The position information obtai ned from the GPS re ceiver will not be transmitted anywhere, so others will not be able to track [...]

2 General information To Enter a Destination address refer to item 6 (Find) in this manual for detailed instruction The NVX430BT Navigator is a navigation system optimized for in-car use. It provides door-to-door navigation for both single and mu lti-point routes using adaptable route parameters. The NVX430BT Na vigator is capable of planning route[...]

3 Operating The NVX430BT Navigator (Controls) The NVX430BT Navigator is designed for ea sy operation. All controls are operable by fingertips, or Stylus. Wherever possibl e, pushbuttons and lists are provided to make accessing functions or changing settings as easy as possible. 3.1 Hardware buttons Hardware buttons are mostly used on map scr eens t[...]

Back View o (2) Loudspeaker - Playback languag e statements and warnin gs. o (3) Stylus - Take the Stylus out of its compartment in orde r to use it, and replace it after use. The Stulys is for operating the touch scree n. Top / Bottom View o (4) Top mounting hole for bracket o (5) Power Button - Press and hold Power b utton for about two seconds t[...]

Left / Right View o (8) SD/MMC slot - Accepts an optional SD (Secure Digital) or MMC (Multi Media Card) Card for removable storage. o (9) Headphone Interface (3.5mm) - Connects to a pair of stereo headphone s. o (10) DC Adaptor Port - Connection to external po wer supply Vehical or AC adapter (5VDC, 2A). o (11) External Aerial Interf ace - Interfac[...]

Screens and controls The primary input channel of The NVX430BT Navigator is the touch screen. If you read on, you will realize that most parts of the screen are not only used to display information but also to initiate functions by tapping. Below you will find a list of the most frequently used controls in the program. 3.1.1 Direct selectors Some o[...]

If the value limits are not displayed at t he ends of the slider, the leftmost position means the minimum value, while the right most position represents the maximum value. This control can be operated in two ways. Ei ther drag the handle to move the slider to its new position, or tap the slider where you want t he handle to appear (the thumb jumps[...]

3.1.6 Sw itches in the Quick menu The switches of the Quick menu (4.7.2) behave as normal switches but they look different in order to fit in with the other menu buttons. Tap the button to toggle between the enabled and disabled states. 3.1.7 Virtual keyboards The NVX430BT Navigator is designed in a way that you only need to enter letters or number[...]

This type of keyboard has la rge, finger-friendly buttons. If you are used to computer keyboards, you may consider trying one of the QWERTY-type keypads. 3.1.7.2 QWERTY-type keyboards QWERTY-type keyboards have both letters and numbers on them. Their layout is the same as of the standard QWERTY and AZERTY (French) keyboards. To switch to your desir[...]

Although QWERTY-type keyboards also c ontain number keys, when entering a house number, the program offers the more convenient numeric keypad. 4 Discovering the program through the screens The best way to discover The NVX430BT Na vigator is to expl ore each screen in detail, and to find out how to move fr om one to another. Read this chapter for a [...]

10 Button to open Map screen 11 Button to open About screen * Depends on program settings ** Same as removing the SD card 4.2 About screen Tap About on the Main menu screen to op en this screen. The About screen is not used in no It is here to inform you about the map lic enses you have, the creators of The NVX430BT Navigator and the legal aspects [...]

To identify satellites use t heir numbers also shown in the virtual sky. The more satellites your GPS tracks (t he green ones), the bet ter your calculated position will be. Additional pieces of information on this screen are: current position in latitude/longitude format, elevation, speed, date, time and calculated accuracy. Note: Accuracy can be [...]

• - Yellow means 2D reception. A GPS position has been acquired, The NVX225 Navigator is ready for navigat ion, but the GPS is using enough satellites for calculating the horizontal position only. Elevation data is not provided, and the position error may be significant. • - Green means 3D reception. The GPS receiver has enough satellites to ca[...]

display is common. The elements of the map are described here. For the controls and special functions of t he two map screens see 4.5. The current version of The NVX430BT Na vigator is primarily intended for land navigation. That is why maps in The NVX430BT Navigator lo ok similar to paper roadmaps (when using daytime colors and 2D map mode). Howev[...]

Note: If you need to zoom out briefly to lo cate your position on the m ap, use the Overview mode instead of zooming out and back in. The Overview mode is a 2D North-up view that can be started by tappi ng the compass button on the right (see 4.5.8). Note: The NVX430BT Navigator has a spec ial Smart Zoom function for navigation that automatically r[...]

4.4.4 Streets and roads The similarity of The NVX430BT Navigator to paper roadmaps is also convenient when it comes to streets, the most important element s of the map concerning navigation. The NVX430BT Na vigator uses similar colo r codes to those you are accustomed to, and the width of the streets also refers to their importance, so it will not [...]

Tip: These objects are normally displayed us ing textured polygons that look natural to the eye. Should you have a slow PND, yo u may wish to switch the textured display off (5.2.5) to free some of the resources of your PND by replacing textures with plain colored surfaces. 4.4.6 Current position and Lock-on-Road When your GPS position is available[...]

timeout The NVX430BT Navigat or restores Lock-to-Positi on (5.6.3.3), and the Cursor jumps back to the cu rrent GPS position. 4.4.8 Marked map points (Pin) The Cursor can be marked with a pin. Pins are shown as being stuck in the map. A pin is visible at all zoom levels and remain s in its position until you unpin it, or delete all pins in advanced[...]

Tip: Tap the map on or near a POI item to see the list of the na mes of the nearest POIs in a popup list, if it is enabled (4.7.2.5). To see the details of a particular POI in the list, tap the blue ’i’ icon on the right. If you have too may POIs nearby, this list may not be complete. In the Cursor menu (4.5.13) there is a button called POI tha[...]

4.4.10.5 Roads in the route excluded by your preferences Although you can choose whether to include or avoid some road types in Route parameter settings (5.4.4), sometimes they are impossible to avoi d near the starting point, via points or the destination. If so , The NVX430BT Navigator will display those segments of the route with an alternate co[...]

No. Display Control 1 (Cockpit only) Turn preview* Opens Route menu* 2 N/a Zooms in (optional) 3 N/a Zooms out (optional) 4 N/a Tilts down (optional) 5 N/a Tilts up (optional) 6 Indicates that Lock to GPS position and heading is inactive Re-enables Lock-to-Position / Smart Zoom 7 Selected map point (Cursor) Opens Popup Info and Cursor menu 8 (Map o[...]

This field also serves as a button. Tap it to get to the Route menu (4.7.3). The Map screen will show a button called R oute here if there is an active route. This also leads to the Route menu. 4.5.2 Zoom in and out (No. 2 & 3) These semi-transparent buttons are only displayed if ‘Zoom & Tilt’ is enabled in the Quick menu (4.7.2.2). As [...]

longer tilt the map by itself (automatic zooming and rotating remains active). You need to press Enter (3.1), or tap the Lock butt on (4.5.4) to return the tilt control to Smart Zoom. You can also set The NVX430B T Navigator to do this automatically after a few seconds (5.6.3.3). 4.5.4 Lock to GPS position and heading (No. 6) This semi-transparent [...]

4.5.6 Map scale (No. 8) The scale indicator is only available on the M ap screen. In 2D map view it represents the scale of the map. In 3D view it is t he scale of the nearest part of the map only. You can use it in both 2D and 3D modes to scale the map. Drag and pull it right to zoom in, or left to zoom out. 4.5.7 Menu (No. 9) This button opens th[...]

the fixed zoom level of Overview in Ad vanced settings (5.6.3.2). An airplane icon indicates Overview mode. Tap the icon again to return to Track-up (automatic rotation) mode. 4.5.9 GPS position qualit y (No. 11) Similarly to the icon found on the GPS Data screen (4.3.3), the map screens also inform you about the GPS signal. They can show the same [...]

4.5.11 Sound muting (No. 13) By tapping this button you can quickly mu te all sounds of the PND. This will not modify the volume level and the enabled or disabled status of the voice guidance or the key sounds (all to be set on the Sound Settings screen: 5.3), just mutes the sound output. When muting is enabled, the speaker icon is crossed out. Tap[...]

reappear by reopening the Cursor menu using the arrow in the bottom right corner. When you open the menu manually, it will stay on until you cl ose it or switch to another screen. Tip: If you want to see the map around t he Cursor, close the Cursor menu and reopen it. When this menu is opened manually, the map is always moved to have the cursor in [...]

• Unpin : remove the pin near or at the Cu rsor. This menu point replaces Pin and is available only if the sele cted point is near or at a pin. • Add POI : opens the new POI capture window to let you add the selected map point to the list of your user points. This menu point is only available on the Map screen and if there are no POIs near the [...]

4.5.16 Distance to next turn (No. 18) This field shows the distance to go befor e reaching the next route event (turn, roundabout, exit, etc.) This field is only displayed when navigating a route. 4.5.17 Next street / Next settlement (No. 19) This field shows the road or street t hat comes next in the route itinerary. If you are not yet in the sett[...]

4.6.1 Route data displayed (for de stination and via points) In the top section of the screen you see information about the current route. These fields are continuously updated while you keep this screen open. When you open the screen, all fields contain information on reaching your final destination. Tap any of the fields to see dat a on the via p[...]

4.6.1.4 Time Left This is an estimated value that can also be displayed in one of the Route data fields on the Cockpit screen as ‘Time to destinati on’. It shows the time needed to reach the final destination of the r oute based on information ava ilable for the remaining segments of the r oute. The calculation cannot take into account tra ffic[...]

• - This icon shows that toll roads are included in the recommended route. • - This icon shows that you need to board a ferry along the recommended route. • - This icon shows that you need to pay for the ferry. • - This icon is displayed when The NVX430BT Navigator could not plan a route with all your road type preferences respected. Someti[...]

4.6.4 Parameters This button opens the Route parameter sett ings screen (5.4) otherwise opened from the Route menu (4.7.3). 4.7 Menu The Menu button can be found in the top right corner of the portrait and square map screens and in the bottom left corner of the landscape map screens. Tapping this button brings up a menu that allows you to access so[...]

Note: When you reach 2D view by tilting the map, Smart Zoom will tilt the map as you press the Lock button or it disappears after the timeout (set in Advanced settings) expires. Use the 3D Map toggle to permanently switch to 2D view. 4.7.2.2 Zoom & Tilt When the green light is on, addi tional transparent buttons (4 .5.2 and 4.5.3) appear on the[...]

If you highlight any of the POI groups by tapping them, the button in the bottom left corner will become Show if the POI group is hidden, or Hide if the group is shown or partly shown. Tip: To make a partly shown group fully s hown, tap this button twice. First you will hide the whole group, and then you will have it displayed with all its subgroup[...]

• Show/Hide : similarly to built-in POIs, you hav e the possibility to show or hide all POIs of the selected category on the map. Groups with a blue icon are displayed; groups with a grey icon are hidden. • New : you can create a new My POI group by tapping this button. You need to select an icon, a name, and the maximum zoom level at which the[...]

• Delete : you can delete any of your previously saved POIs. The NVX430BT Navigator will ask you to confirm this action. • Edit : you can edit the attributes (name, icon and group) of a previously created POI. • OK : if you tap this button, the map screen returns with the selected POI in the middle. 4.7.2.5 Popup Info When this feature is ena[...]

Each track log has a color, shown to the left of its name when the track log is visible on the map. If the track is not visible, an underscore character is shown here. Tapping the line of the highlighted tra ck log will toggle between showing and hidin g that log. The track log wil l be drawn on the map using the color next to its name. When a trac[...]

• Replay : push this button to see a simulation of the saved track log on the map. A green icon (4.5.12) will appear on the map screens to let you know it is not a fly over but a simulation based on a real saved log. • Delete : you can delete a track log if it is not needed any more. The NVX430BT Navigator will ask you to confirm this action. ?[...]

4.7.3 Route tab This menu contains options to manage different settings in the program. 4.7.3.1 Recalculate This menu point is only available if an active route exists and GPS position is present. It brings up a menu with four options. Using one of these functions you can modify the current route. Recalculate This function repeats the r oute calcul[...]

The NVX430BT Navigator still keeps on navi gatin g towards that point. When there are no via points left (only the destination), the name of th is button turns to Delete Route, and it cancels the navigation. Bypass When you run into a traffic jam or roadbl ock, you may want to have The NVX430BT Navigator calculate a route that departs the original [...]

Note: When a POI item is used as a route waypoint, deleting the route will not delete the POI item itself, just its role in the route. 4.7.3.3 Itinerary This function opens the itinerar y (route event list) of the active route. The Itinerary has three different display modes and two functions. Display modes Display modes are different only in the n[...]

recalculate the route excluding that turn. If the next street is important in the route, it is likely that The NVX430B T Navigator will replace the turn with several easier ones to get to the same street. • Road : when you exclude a road, The NVX430BT Navigator will calculate a route that does not use that road. It is useful when y ou anticipate [...]

you open the list during navigation, or t he point where The NVX430BT Navigator most recently recalculated the route. This means the list is permanently updated, and via points drop out during the journey. The last item in the list is y our final destination. Use the arrows on the right to browse thr ough the list and tap any line to highlight it. [...]

4.7.4 Main button The Main button at the bottom right corner leads to the Main menu screen described in 4.1. 5 Settings The NVX430BT Navigator provides several settings in order to let you customize the functions of the program. The Settings screen can be accessed directly from the Main menu screen (4.1) and from the map screens by using the batter[...]

When you disable Safety Mode, The NVX430BT Nav igator will warn you. 5.1.2 Set Favorite Destinations You can select two of your most frequent des tinations to be your favorites (6.2.5). You can start navigating to either of t hem by only two taps on the screen. The original names of these points are Home and Work. You can rename them and spec ify t[...]

fully correct for all roads in the map. This setting lets you decide whether you want to receive the warnings or not. If you turn on this switch, The NVX430B T Navigator will open a new screen to let you customize the parameters us ed by the speed warning. You can set two different kinds of behavior for the warning: one is applied up to a certain s[...]

100 km/h 105 km/h (=100 km/h + 5%) 120 km/h 126 km/h (=120 km/h + 5%) 160 km/h 168 km/h (=160 km/h + 5%) 5.1.5 Off-route Recalculation Once a route is planned, this setting will tell The NVX430BT Navigator what to do when you deviate from that route. 5.1.5.1 Automatic The route will be recalculated automatica lly a few seconds after you go astray. [...]

5.1.5.3 Disabled If you stick to the original route, and you wi sh to get back to it on your own, you can disable recalculation. This way gui dance will stop until you return to the recommended route. 5.2 Map settings You can set a few parameters determini ng the appearance of the maps in The NVX430BT Navigator. 5.2.1 Daylight / Night color profile[...]

5.2.4 Show Street Labels You can set whether or not to see the nam es of the streets and the POI icons on the map when driving. Based on the current zoom and tilt levels, street names are displayed either aligned with t he street or on signposts stuc k into the streets (4.4.4). If you switch these signs on, it will be easier to recognize your locat[...]

5.3.2 Voice gu idance volume/switch The switch on the left can turn on or mute The NVX430BT Navigator's audible guidance. When turned on, the slider on t he right will adjust the loudness of voice prompts. In its leftmost posit ion the voice guidance is s uppressed, in its rightmost position the master volume applies. 5.3.3 Key sound volume/sw[...]

Note: The Mute function (4.5.11) accessi ble from the map screens overrides the settings on this screen. When The NVX430B T Navigator is muted, all sounds disappear. These settings will not be changed; only the output will be muted temporarily. 5.4 Route parameter settings This is a very important page. Settings here determine how routes will be ca[...]

5.4.2.3 Economical This setting is a wise combination of the previous two. Although basically going for the fastest solution, if ther e is another route taking a bi t more time but a lot less distance compared to the fastest one, The NVX430BT Navigator will choose this one instead to save fuel. 5.4.3 Vehicle You can set the type of the vehicle that[...]

5.4.4.3 Ferries The accessibility of temporary ferries is not necessarily included in the map data. Furthermore you may need to pay fare, so y ou may consider disab ling them from the preset enabled status. 5.4.4.4 U-turns Although displayed amongst road types, this is a type of action. Most drivers prefer to replace them with a few normal left and[...]

5.5.1 Program language This button displays the current writt en language of the progr am. By tapping the button you can select from a list of ava ilable languages. The NVX430BT Navigator will have to be restarted if you change this setting. The NVX430B T Navigator will ask for confirmation before it restarts. 5.5.2 Voice language This button shows[...]

5.6 Advanced settings These screens let you set a large number of different advanced settings and initiate some special functions. These settings and functions are divided into six groups. Tap on any button to set the corresponding parameters. They a ll open new windows where you can make your desired changes. 5.6.1 Display options These settings d[...]

Note: you will still have the possibility to switch the map to 2D view or north-up orientation, but the map will return to 2D mode whenever Cockpit mode is started. 5.6.1.3 Zoom in after find When this switch is turned off, The NVX430 BT Navigator will centre the map to the location selected in Find but will not change the z oom level. If you turn [...]

5.6.2.1 Power management At the top of the screen you can set how the backlight will behave when the screen has not been touched for a while. Backlight always on You can choose to have the lights always on. Smart power save You can also initiate this special feat ure of The NVX430BT Na vigator. Smart Power save will light up the screen only when y [...]

5.6.3.1 Smart Zoom settings You can set how close Smart Zoom can zoom in when approaching the next turn (Zoom-in limit), and the maximum zoom leve l to zoom out when the next turn is further away (Zoom-out limit). The default val ues are set to be optimal in most cases. 5.6.3.2 Enable Overview mode You can configure how the Overview mode is trigger[...]

Turn this switch on if you want The NVX4 30BT Navigator to return to your current GPS position after you have moved the map dur ing navigation. This is useful if you have moved the map accidentally, or if you have moved it to quickly check something near your route. After a certain timeout set below, th e Lock button disappears, and the map immedia[...]

5.6.4.1 Off-route sensitiv ity and Recalculation delay Depending on the quality of your GPS device, the GPS antenna location in the car and the environment you are driving in, ro ute recalculation can behave differently. The NVX430BT Navigator may think yo u have departed the proposed route and perform a recalculation even if you have not done so. [...]

GPS errors. For pedestrian use you may c onsider disabling Lock-on-Road to make The NVX430BT Navigator always show your exact position. Note: By turning off Lock-on-Road you also tu rn off the GPS positi on error filtering. The position shown on the map will be subject to all position errors and position fluctuations. 5.6.5 User data management Eve[...]

By tapping this button you will lose all of the changes made since the time of the latest backup. The NVX430BT Navigator wil l warn you about this before overwriting the current database with the backup. 5.6.5.3 Remove Pins Normally pins can be deleted on e by one. Since they are s hown at all zoom levels, and you may end up having too many of them[...]

6.1 Find & GO (Main menu) As just mentioned, the fastest way to find your destination and start navigating is to tap Find & GO in the Main Menu (4.1). This will put you on the Find screen, and as soon as you pick a destination, The NVX430 BT Navigator will im mediately show the Cockpit screen and start navigation. This means that if you pla[...]

6.2.1 Find an Address, St reet, Intersection or City Searching for a city, a street, an intersec tion, or an exact address can all be done in the Find Address module? If you know at l east a part of the address, this is the quickest way to find the location. The following illustration shows the structur e of the address-s earch module. There are fi[...]

If you find that the list of re cently used cities contains settlements you will not visit in the near future, you can choose to empty the list by the Clear button in the bottom left corner. Selecting a new settlement to search in If you are looking for a city or town (or state) you cannot find on the list, tap Other City in the top right corner . [...]

splits the word. That is why you can sear ch for ‘Alleyn-Et-Cawood’ with all the following search criteria: ‘A E C’, ‘Et A’, or ‘Al Ca’. Tip: If you have finished enter ing the street name and the matching names are still on more than one page, just tap Done, and select your desired settlement from the list. Turn the pages with the [...]

Note: In Australia you can skip this part by tapping done before entering any letters. This way you can search for a street name in the whole state. In other countries this step is compulsory. If you press done befo re entering any letters, the list of settlements will appear in alphabe t ical order. Changing the country If your destination is in a[...]

Tip: If you are looking for an intersection, c hoose the street that ha s a rare or unusual name first. This way you need to enter fewer le tters to get the list of results. You may also choose the shorter of the two streets fi rst. This way it will be faster to choose the second one from the list of crossing streets after the first street has been[...]

desired street name from the list of available intersections of the previously selected street (displayed in the top centre of t he screen). The crossing of the two streets will be the selected point. 6.2.2 Find in History If you have used Find before, or saved map points as POIs, marked points with a pin, or picked and used points of the map befor[...]

When you enter this page, the coordinates of the current G PS position (or the selected map point (Cursor) if Lock-to-Positi on is inactive) are show n at the top of the display. The coordinates are always shown in th e format configured in advanced settings Display options (5.6.1.4), but you can en ter the coordinates in any of the three formats. [...]

confirm that it matches what you want. To change the reference, tap the Change ref. button in the top right corner. Once you tap the Change ref. button, y ou are presented with these choices: • Address : you can specify an address to be searched around, or a settlement to search in. The centre of this settl ement will be used as the reference poi[...]

Search results are ordered by their distance from the given reference point (nearest first). Note: In the case of POI items that you hav e created, you can also see the results in alphabetical order. Push the button with the label ABC that appears between Filter and the page number. Once the desired POI item is selected, The NVX4 30BT Navigator wil[...]

7. Bluetooth Phone Operation Tap the icon to enter the Bluetooth display menu as shown below. Where: —— Phone Keypad —— Pair —— Call Record —— Attribute —— Last Dialed Call; tap to —— Pair Devices redial the last dialed call. 7.1 Pair  Tap the pair icon; the Pair scr een will be displayed:  On the mobile phone, se lect[...]

N o t e s : 1. When pairing, please make su re the distance between the device and the mobile phone is within the pairing range. 2 . After successful pairing, tapping will go unanswered. 3 . After successful pairing, if the Sleep/Wake up Button is pressec to turn off the device, when the device is turned on again, the device w ill connect to the mo[...]

7.2.1 Menu Operation —— Minimize the window —— Volume up —— Volume down —— Call time —— Mute —— Transfer the call from the de vice to the mobile phone —— Hung up the call —— Tap to open the numeric keypad. The following display, can be used to input the extensi on or the numeric confirmation. Tap ; the numeric keypad[...]

7.2.2 Answering/Re jecting an Incoming Call When there is an incoming call, the “Incomming Call” screen will be displayed: —— Answer the incoming call In talk mode. (The operation is the same with outgoing call talk mode operation.) —— Rejecting the incoming call 7.2.3 Call Record In the Bluetooth display menu, tapping will enter call r[...]

Tap the numeric icon 0,1~ 9 to input the pin code. Tap to clear the wrong number. Tap to confirm and return to the A ttribute display, and the pin code you have set will be displayed in the Pin Code bar. —— Activate the check box if Bluet ooth function is to remain enabled after the Bluetooth interface menu is closed. —— Tap to select the r[...]

Notes: 1. In navigation mode you can obs erve the following display: At anytime, tap icon to switch from any mode to the Bluetooth mode. 2. In navigation mode, if there is an incoming call, the display will switch to the Incoming Call display: You can tap the to reject the incoming call. Tap to answer the incoming call. When the call is finished, t[...]

Tapping will call the number, and t he outgoing call display will appear. (Refer to the “O utgoing call” display above.) 8. Multimedia Tap on the main menu to enter the Mu ltimedia selection display; three items appear for selection: Photo, Video and Audio. 8.1 PHOTO Tap icon in Multimedia menu to open the Photo folder with pictures similar to [...]

Tap to scan the pictures in slide m ode. In slide mode, tapping anywhere ont the screen will return to the normal display. 8.2 AUDIO The unit can play music or sound files with MP3/WMA9/MAV format. Tapping icon the unit will enter the corresponding folder automatically as followed: Tap the corresponding file name to open the file; the Play interfac[...]

8.3 VIDEO Tap icon to enter video Scan m ode, and the following screen will be displayed: Tap file icon to open the video file. When you open a video file, the adjacent screen will be displayed:  Dragging the slide block can fast forward/reverse the playback.  Dragging the slide block right or left adjusts the volume level up or down.  Tap[...]