Audiovox PRO9600 инструкция обслуживания

FEA TURES:  2 Three Button RF T ransmitters  Anti Code Grabbing T echnology  Four Channel Receiver  Remote Panic In All Modes  Protected V alet  User Programmable Manual Override  7 Function LED  Intrusion Alert With Memory  Audible Arm, Disarm, T amper , and Defective Zone Siren Confirmation  Instant Siren Activation [...]

Y our PRO-9600 Remote Security System with on-board Satellite/Paging Access has many features and available options; some of which are selected at time of installation. For your reference, the list on the back page of this manual shows what features and options have been installed. Consult your installing dealer for options that may have been insta[...]

point is opened during the 30 second arming cycle, arming will be suspended. When all entry points are closed, the arming cycle will begin again. At the end of the 30 seconds, The parking lights will flash once, the siren will chirp once, and the dash mounted LED will begin to flash slowly confirming the system is armed. If the siren did not sound [...]

SILENT DISARMING: As you approach the vehicle, press and hold the arm/disarm button of your key chain trans- mitter for two seconds. The parking lights will flash twice, and the dash mounted LED will turn off confirming that the system is disarmed. If you have the optional door lock/unlock circuit installed, the doors will unlock. If you have the o[...]

PROGRAMMING YOUR MANUAL OVERRIDE CODE: Y our security system can be disarmed without the use of the keychain transmitter . This is necessary , since you will need the ability to disarm the system if you lose your transmitter , or if the transmitter battery fails. In order to provide the highest level of security , this system will allow you to prog[...]

3. As soon as the chirp that corresponds to your first digit sounds, quickly turn the ignition key; a) Off then on if your second digit is 1 b) Off then on, then of f, then on if your second digit is 2. c) Off then on, off then on, of f then on, if your second digit is 3. 4. The alarm will stop sounding, and you can now st art and operate your vehi[...]

The configuration listed indicates the default setting from the factory . If the installation of your unit specifies a different transmitter configuration, the transmitter operation will be listed on the rear page of this manual. REMOTE CHANNEL 2 / AUXILIAR Y 1 FUNCTIONS: This security system has an additional feature that can be connected to a num[...]

3. Unlocking of the vehicle Doors; (Must have power door locks and optional interface in- stalled). If you've ever locked your keys in your vehicle, this command requires no expla- nation. A simple phone call to the 1-800 number and you're in. 4. Channel 2 / Auxiliary 1; Whatever function is controlled by the alarm's channel 2 can al[...]

PRO-9600 SYSTEM FUNCTIONS A T A GLANCE DASH L.E.D. INDICA TION: RAPID FLASHING = P ASSIVE ARMING SLOW FLASHING = ARMED OFF = DISARMED ON SOLID = V ALET MODE 3 FLASH...P AUSE = INTRUSION ZONE 3 2 FLASH...P AUSE = INTRUSION ZONE 2 1 FLASH...P AUSE = INTRUSION ZONE 1 SIREN AND OR HORN CHIRP INDICA TION: 1 CHIRP = ARMED** 2 CHIRPS = DISARMED** 3 CHIRPS[...]

ALARM PAGER Channel 2 Auxiliary Output 1 Is Connected To Channel 3 Auxiliary Output 2 Is Connected To Channel 4 Auxiliary Output 3 Is Connected To PRODUCT INFORMATION Serial # Country Code Dealer/Distributor ID # Installation Date VEHICLE INFORMATION Vehicle Year Vehicle Manufacturer Vehicle Model Vehicle Color License Plate # Vehicle ID# YOUR TRAN[...]