Avanti BD6000 инструкция обслуживания

INSTRUCTION MANUAL MANUAL DE INSTRUCCIONES Model Number / No. de Modelo: BD6000 BEER DISPENSER (DISPENSADOR / ENFRIADOR DE CERVEZA) BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS. La secció n en espa ñ ol empieza en la página 2 7 . Avanti has a policy of continuous improvement on its products and reserves the righ[...]

2 BEER DISPENSER SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual for your appliance. Always read and obey all safety message s . This is the Safety Alert Symbol. This symbol alerts you to potential hazards that can kill or injure you and others. All safety messages will [...]

3 IMPORTA NT SAFEGU IDES Before the appliance is used, it must be properly positioned and installed as described in this manual,so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance , follow basic precaution, including the following: ? Plug into a grounded 3 - prong outlet, do not remove groun[...]

4 REGISTRATION INFORMA TION Thank you for purchasing this fine Avanti pro duct. Please fill out this form and return it within 100 days of purchase and receive thes e important benefits to the following address: Avanti Products, A Division of The Mackle Co., Inc. P.O.Box 520604 – Miami, Florida 33152 ? Protect your product: We will keep the model[...]

5[...]

6 HELP US HELP YOU... Read this guide carefully. It is intended to help you operate and maintain your new Beer Dispenser properly. Keep it handy to answer your questions. If you don't understand something or you need more assistance , please call: Avanti Customer Service 800 - 220 - 5570 Keep proof of original purchase date (such as your sales[...]

7 T ABLE OF CONTENTS Beer Dispenser Safety 2 Important Safeguides 3 Registration Information ________________________________ ______________________ 4 Help Us Help You … ________________________________ __________________________ 6 Parts and Features ________________________________ ___________________________ 8 Important Safety Ins tructions ___[...]

8 P ARTS AND FEATURES 1. B eer Tower 2. Mylar Washer 3. Safety G uard Rail 4. Drip Tray 5. A djustable Thermostat 6. CO 2 Regulator 7. CO 2 Gas Cylinder 8. CO 2 Gas Cylinder Holder 9. Evaporator 10. Reversible Door 11. Beer Keg (Not I ncluded) 12. Metal Plate 13. Metal Bracket (2) 14. Castors with Loc k (4)[...]

9 IMPORTANT SAFETY INS TRUCTIONS ? WARNING ? To reduce the risk of fire, electrical shock, or injury when using your Beer Dispenser, follow these basic precautions: ? Read all instructions before using the unit. ? DANGER or WARNING: Risk of child entra pment. Child entrapment and suffocation are not problems of the past. Junked or abandoned applian[...]

10 under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and or grounding should be directed toward a certified electrician or an authorized Avanti Products service center. ? After plugging the appliance into a wall outlet, allow the unit to cool down for 2 - 3 hours before placing any co[...]

11 ? In stallation Inst ructions for Beer Dispenser WARNING CO 2 GAS CAN BE DANGEROUS WARNING : CO 2 cylinders contain high - pressure compressed gas which can be hazardous if not handled properly. Make sure you READ and UNDERSTAND the following procedures for CO 2 cylinders BEFORE INSTALLATION . 1. ALWAYS connect the CO 2 cylinder to a regulator. [...]

12 Castors wi th Lock Installation Sketch ? Remove the 4 castor s from one of the boxes inside the unit. Install the two castors with metal bracket at the front designated positions of the cabinet base and the rest two castors at the rear designated positions (Four screw h oles pre - supplied). ? In order to release or lock the brake, follow the be[...]

13 Installation Of t he Keg Coupler ? Insert the keg coupler provided into the locking neck of the beer keg and turn it cl ockwise to lock into position, making sure the keg coupler is in th e closed position. (See Figure 3 ) Figure 3 Inst allation of t he CO 2 Air Line Hose ? Attach the end o f the red hose to the hose connection on the keg couple[...]

14 Installation o f CO 2 Air Line Hose t o Re gulator ? Attach the open end of the red hose provided to the hose barb connection on the regulator. ? Secure hose by using the steel clamp provided. Use P liers /screwdriver to tighten clamp and assure no leaks. (See Figure 7 ) Figure 7 Installation Of The Beer Tower ? Remove the top plug by twisting a[...]

15 Adjusting t he CO 2 Regulator ? The gauge monitors low internal keg pressure and sh ould be adjusted to read 10 - 12 PSI . (See Figure 10) ? In order to d o that: 1. Release adjustment lock nut marked 2. 2. Using a flat screwdriver, turn regulator screw marked 3. If increased low pressure is sought, rotate screw clockwise. By rotating it counter[...]

16 ? Converting Your Beer Dispenser To An “All Refriger ator” 1. Turn the control knob to the “OFF” position. 2. Close the main val ve on the CO 2 cylinder. 3. Close the secondary shut - off valve on the regulator pipe. 4. Close the connection between the beer keg and the keg coupler. 5. Drain any remaining beer from the lines. 6. Disconnec[...]

17 ? Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a clean soft cloth. ? Vacation Time ? Short vacations: Leave the Beer Dispenser operating during va cations of less than three weeks. ? Long vacations: If the appliance will not be used for several months, remove all contents and unplug the power c[...]

18 FLAT BEER Foamy head disappears quickly: beer lacks usual zestful brewery fresh flavor. Causes Corrections 1) ? Greasy glass 1) ? Do not wash beer glasses together with glasses that have contained milk or any other fatty substance. Lipstick is a fatty substance.. Make sure it is removed from glass. ? Excess amount of germicides build up and leav[...]

19 7) ? Contaminated air source. ? Oil or grease fumes. 7) ? Filter all air after it lea ves compressor. ? Oil fume from compressor, of kitchen grease fumes, pumped into beer, will cause Flat Beer. ? If possible CO 2 gas should be used as a pressure source. 8) ? Moisture in Air system. 8) ? With the use of an air compressor, it is imperative to hav[...]

20 ? Dirty a ir lines should be washed with a good cleaning compound, normally used for cleaning coils, and then rinsed clean. 3) ? Rubber hose will absorb and retain odors. 3) ? Rubber hose will absorb and retain odors. An approved Vinyl tubing is best for air since it does not absorb moisture, and is not affected by oily substances. ? A fresh, ou[...]

21 2) ? Yeast growth, or other obstructions in faucet. ? Worn faucet p arts and worn faucet washers. 2) ? Clean faucet spout with a good brush daily. Scour all internal faucet parts at least once a week. ? Replace worn washers as required. If faucet does not open wide, worn parts or entire faucet must be replaced. 3) ? Kinks, dent s, or twists in c[...]

22 pressure must be slightly higher than the internal pressure of the beer (no more than 18 lbs. s hould be applied.) ? The colder the beer and the higher the applied CO 2 pressure, the more rapid the absorption of CO 2 by the beer. This over - carbonates the beer, causing Wild Beer. 11) ? Not enough pressure. ? No pressure. 11) ? Check for defecti[...]

23 PROBLEMS WITH YOUR BEER DISPENSER? You can solve many c ommon Beer Dispenser problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the servicer. TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSE Beer Dispenser does not operat e. Not plugged in. The circuit breaker[...]

24 SERVICE FOR YOUR BEER DISPENSER We are proud of our customer service organization and the network of professional service technicians that provide service on your Avanti Beer Dispenser. With the purchase of your Avanti Beer Dispenser, you c an have the confidence that if you ever need additional information or assistance, the Avanti Products Cus[...]

25 YOUR Avant i Products WARRANTY Staple your sales receipt here. Proof of original purchase date is needed to obtain service under warranty. WHAT IS COVERED LIMITED ONE - YEAR WARRANTY For one year from the date of purchase by the original owner, Avanti Products will , at its option, repair or replace any part of the Beer Dispenser which proves to[...]

26 WI RING DIAGRAM[...]

27 INSTRUCCIONES EN ESPAÑOL PRECAUCIÓN Para reducir el riesgo de incendio, descarga eléctrica, o daño cuando use su electrodoméstico, siga las siguientes precauciones. ? Lea todas las instruccio nes antes de usar su electrodoméstico. ? Peligro o Precaución : Existe el riesgo que los niños queden atrapados. ? Antes de desechar su dispensador[...]

28 (estufa, calentador, radiador, etc.). Los rayos solares directos pueden malograr la capa acrílica, y las fuentes de calor pu eden ocasionar un aumento en el consumo eléctrico. Los ambientes extremadamente fríos pueden afectar la eficiencia del enfriamiento de su dispensador. ? Evite ubicar el dispensador en áreas húmedas. ? Conecte el dispe[...]

29 a. Uno en el regulador de CO2 (GAS CARBONICO). b. Uno en el acoplador del producto o en la línea de presión del gas. Instalación del Soporte del Cilindro de CO2 (GAS CARBONICO) ? Instale el soporte de metal sobre los 4 tornillos localizados en la parte posterior. Alinee los agujeros en el soporte con los tornillos presionando firm emente haci[...]

30 ? Agarre el soporte del barril por las asas y deslícelo de ntro de la cabina. (Vea figura 7 ) Instalación del adaptador del barril ? Inserte el adaptador del barril que se provee dentro del cue llo del barril de cerveza y gírelo en sentido horario para asegurarlo en posición Instalación de la manguera de aire CO2 (GAS CARBONICO) o Una el ex[...]

31 ? Convierta su Dispensador de Cerveza en “Todo un Refrigerador” 1. Gire el control a la posición “OFF”. 2. Cierre la válvula principal en el cilindro de CO2 (GAS CARBONICO). 3. Cierre la válvula de desconexión secundaria en el t ubo del regulador. 4. Cierre la conexión entre el barril de la cerveza y el acoplador del barril. 5. Dren[...]

32 servicio posventa de su localidad o al empleado que le vendio la unidad. ? Limpieza de su Dispensador de Cerveza ? Girar el control de temperatura a OFF, desenchufe el Dispensador de Cerveza y vacíe el contenido. ? Lave el interior con agua tibia y un trapo suave remojado en una solución de bicarbonato de sodio. La solución consiste en 2 cuch[...]

33 CERVEZA ACIDA La bebida tiene un olor y sabor a rancio o pasado CAUSAS CORRECCIONES ? La línea de aire está contaminada ? Ver OFF - Taste Beer Corrección . ? Transporte in apropiado de los barriles de cerveza, cuando se transporta en un camión no refrigerado durante la temporada de verano en que las temperaturas son muy altas, puede causar q[...]

34 escurridor de rejillas de metal. ? Enjuague con agua helada o fresca sólo antes de servir la cerveza. Es mejor serv ir la cerveza en un vaso mojado. ? Chorro inapropiado del Dispensador de Cerveza ? Abra el grifo rápida y completamente. ? Verifique y encuentre la distancia correcta entre el grifo y el vaso en el momento que sale la cerveza del[...]

35 se usan para limpiar de mangueras de espiral, y enjuagándolas cuidadosamente ? Mangueras de goma absorben y retienen olores ? M angueras de goma absorben y retienen olores. Puede usar tubo de vinilo regulado y aprobado y son lo mejor para el aire ya que no absorben humedad y no pueden ser afectados por sustancias grasosas. Una línea de aire fr[...]

36 rápidamente el CO2. Esto carbonata la cerveza en exceso, causando que la cerveza se ponga rebelde. ? No hay presión o esta no es suficiente ? Ve rifique las salidas de aire defectuosas. Vea corrección . ? Siempre encienda la presión antes de verter cerveza. PROBLEMAS CON SU DISPENSADOR DE CERVEZA Usted puede resolver muchos problemas comunes[...]