Axis Communications P5534 инструкция обслуживания

USER MANUAL AXIS P5534 PTZ Dome Network Camera[...]

About this document This manual is int ended for administra tors and users of the AXIS P5534 Network Camera, and is applicable to fi rmware 5.40 and lat er. It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this product. Some knowle dge of UNIX or Linux-based sy[...]

AXIS P5534 PTZ Dome Netw ork Camer a T able of Content s H a r d w a r e o v e r v i e w ....... ................... ................ 5 C o n n e c t o r s ... .......... .......... ............ .......... ....... 5 L E Di n d i c a t o r s ............. .......... ............. .......... .... 6 M i d s p a nL E Di n d i c a t o r s ..............[...]

AXIS P5534 PTZ Dome Netw ork Camer a T able of Content s S y m p t o m s ,p o s s i b l ec a u s e sa n dr e m e d i a la c t i o n s ............. ......... 5 0 Technical Speci fi c a t i o n s ...................................... 54 P e r f o r m a n c ec o n s i d e r a t i o n s ..... .......... .......... ............ .. 5 6 4[...]

AXIS P5534 PTZ Dome Netw ork Camer a H a rd w a re ov e r v i ew Hardware overview 6 5 7 4 1 2 3 1 Part number (P/N) & Serial number (S/N) 2 Network connector (High PoE) 3 Multi-connector 4 Control button 5 SD memory card slot 6 Status LED indicator 7 Restart butto n Connectors Network connector - RJ-45 Ethernet connector. Supports Power over E[...]

AXIS P5534 PTZ Dome Netw ork Camer a H a rd w a re ov e r v i ew • C o n n e c t i n gt oA X I SI n t e r n e tD y n a m i cD N SS e r v i c e . S e e page 40 . To connect, press and hold the button for about 3 seconds. • Resetting the product to factory default settings. See page 46 . Restart button - Press to restart the product. Multi-connec[...]

AXIS P5534 PTZ Dome Netw ork Camer a A ccessin g the pr oduct Accessing the product To install the Axis product, refer to the Installation Guide supplied wi th the product. The product can be used with most operating sy stems and browsers . The recommended browsers are Internet Explorer with Wind ows, Safari with Macintosh and Firefox w ith other o[...]

AXIS P5534 PTZ Dome Netw ork Camer a A ccessin g the pr oduct Access from the Internet Once connected, the Axis product is accessible on your local net work (LAN). To access the product from the Internet you must con fi gure your network router to allow incoming data traf fi c to the product. To do this, e nable the NAT-traversal fea ture, which [...]

AXIS P5534 PTZ Dome Netw ork Camer a A ccessin g the pr oduct Controls on the Live View page Click View siz e to scale the image down to 800 pixels wide or to full scal e. Only ava ilable in MJPEG. The Stream Pro fi le drop-down list allows you to select a customized or pre-program med stream pro fi le. Stre am pro fi les are con fi gured under[...]

AXIS P5534 PTZ Dome Netw ork Camer a A ccessin g the pr oduct AMC Audio controls AMC audio buttons control the speakers and microphone connect ed to the client computer. The buttons are only visible when audio i s enable d. Speaker button — Click to turn the speakers on or off. Microphone button – Click to mute or unmute the microphone. In Simp[...]

AXIS P5534 PTZ Dome Netw ork Camer a A ccessin g the pr oduct Pan and Tilt bars – Use the arr ows to pan and tilt the camera view, or click on a position on the bar to steer the camera view to that position. Zoom bar – Use the arrows to zoom in and o ut, or click on a position on the bar to zoom to that position. Focus bar – Use the arrows to[...]

AXIS P5534 PTZ Dome Netw ork Camer a Media str eams Media streams The Axis product provides several audio and video stream form ats. Your requirem ents and the properties of your network will determine the type you use. The Live View page in the product provides access to H.264 and Motio n JPEG video streams, audio streams and to the list of availa[...]

AXIS P5534 PTZ Dome Netw ork Camer a Media str eams T h eA M CC o n t r o lP a n e lc a nb eu s e dt oc o n fi gure various video and audio se ttings. Pl ease see the AXIS Media Control User’s Manual for more information. The AMC Control Pane l is automatically installed on fi rst use, after whi ch it can be con fi gured. Open the AMC Control [...]

AXIS P5534 PTZ Dome Netw ork Camer a Media str eams Note • <ip>= IP addess • The Axis product supports QuickTime 6.5.1 and later. • QuickTime adds latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths a bove, although Axis do es not guarantee this. Accessing audio streams The L[...]

AXIS P5534 PTZ Dome Netw ork Camer a Settin g up the pr oduct Setting up the product The Axis product can be con fi gured by users with administrator or opera tor rights. Click Setup in the top right-hand corner of t h eL i v eV i e wp a g e . • Administrators have unrestricted a ccess to all settings. • Operators have access to all settings e[...]

AXIS P5534 PTZ Dome Netw ork Camer a Video and A udio Video and Audio The video and audio settings ca n be used to optimize video a nd audio quality. You can con fi gure the following: • Vide o stream settings. See page 16 . •S t r e a m p r o fi les. See page 17 . • Camera settings. See page 17 . • Over lay image. See page 19 . •P r i [...]

AXIS P5534 PTZ Dome Netw ork Camer a Video and A udio • The Li ve View page in Inter net Explorer in Windo ws. Ri ght-click in the image and select Pixel counter .U s e t h e m o u s e to move and resiz e the rectangle. Image You can modify the image resolution and compression, and rotate the image from the Image tab ( Video & Audio > Vide[...]

AXIS P5534 PTZ Dome Netw ork Camer a Video and A udio Image Appearance Increasing the Color level increases the color saturation. The value 100 gives maximum color saturation. The value 0 gives a black and white image. The image Brightness can be adjusted in the range 0–100, where a higher value produces a brighter image. Increasing the Sharpness[...]

AXIS P5534 PTZ Dome Netw ork Camer a Video and A udio I m a g ef r e e z eo nP T Z- Select All movements to freeze the image w hile the camera is moving during a pan, tilt or zoom operation. Once the camera reaches its new position, t he view from that position is shown. Presets freezes the image only when the camera moves between preset positions.[...]

AXIS P5534 PTZ Dome Netw ork Camer a Video and A udio Control viewer toolbar ). In Push-To-Talk mode, click and hold the button to s peak and release it w hen done. In Toggle mode, click once to switch between speaking and listening. The Talk/Listen mode is con fi gured from the Audio tab in the AMC control panel (see AXIS Media Control on page 12[...]

AXIS P5534 PTZ Dome Netw ork Camer a Video and A udio Audio Output An external speaker can be connected to the product’s Audio- out connector. The output can be used with high impedance headphones or connected to another ampli fi er with speakers. Con fi gure the audio output settings under Video & Audio > Audio Settings . Note A multi-c[...]

AXIS P5534 PTZ Dome Netw ork Camer a Live V ie w Con fi g Live View Con fi g You can customize the Live View page and alter it to suit your requirements. It is possible to de fi ne the following features of t h eL i v eV i e wp a g e . •S t r e a m P r o fi le. S ee page 17 . • Default Viewer for Bro wser. See page 22 . • Viewer Setting s[...]

AXIS P5534 PTZ Dome Netw ork Camer a Live V ie w Con fi g Browser Viewer Description AMC Recommended viewer in Internet Explorer (H.264/Motion JPEG) QuickTime H.264 Java applet A slower imaging alter native to AMC (Motion JPE G). Requires one of the following installed on the client: • JVM (J2SE) 1.4. 2 or higher • JRE (J2SE) 5.0 or higher Win[...]

AXIS P5534 PTZ Dome Netw ork Camer a Live V ie w Con fi g Note A multi-connector cable (available from Axis) is required wh en connecting external I/O devices to the Axis product. See Multi-Connector Cable (sold sep arately), on page 47 24[...]

AXIS P5534 PTZ Dome Netw ork Camer a PTZ (P a n T ilt Zoom) PTZ (Pan Tilt Zoom) Preset Positions A preset position is a prede fi ned view that can be used to quickly steer the camera to a speci fi c location. Preset positions can be accessed in several ways: • By selecting the preset from the Preset posi tions drop-do wn list in the Live View P[...]

AXIS P5534 PTZ Dome Netw ork Camer a PTZ (P a n T ilt Zoom) To con fi gure the Gatekeeper, follow the online instructions under PTZ > Gatekeeper . Guard Tour A guard tour displa ys the video stream from differ ent preset posi tions, one- by-one , in a prede termin ed order or at random a nd for con fi gurable time periods. The enabled guard to[...]

AXIS P5534 PTZ Dome Netw ork Camer a PTZ (P a n T ilt Zoom) When using a joystick (or emulating one with the mouse) the Enable proportional speed setting can be used to reduce the maximum pan/tilt movement speed, i.e. the speed the cam era view moves at w hen the joystick is pushed al l the way out in any direction. This is useful then the view is [...]

AXIS P5534 PTZ Dome Netw ork Camer a Detector s Detectors Motion Detection M o t i o nd e t e c t i o ni su s e dt og e n e r a t ea na l a r mw h e n e v e rm o v e m e n to c c u r s( o rs t o p s )i nt h ev i e w . U pt o1 0I n c l u d ea n dE x c l u d e windows can be con fi gured: • Include windows — target speci fi c areas within the w[...]

AXIS P5534 PTZ Dome Netw ork Camer a Detector s Parameter Object Size History Sensitivity Description Object size relative to window size. Object memory length. Difference in luminance between background and object. High level (100%) Only very large objects trigger motion detection. An object that appears in the window triggers motion detection for[...]

AXIS P5534 PTZ Dome Netw ork Camer a Applications Applications Third party applications can be uploa ded to and installed on the Axis product. For information a bout available applications, downloads, trials and licenses, go to www.axis.com/applications To upload an application, go to Applications > Overview , click Browse to locate the fi le a[...]

AXIS P5534 PTZ Dome Netw ork Camer a Ev e n t s Events The Axis product can be con fi gured to perform actions when different events occur, for example, start a recording wh en motion is detected. The set of conditions that de fi nes how and when the action is triggered is called an Action Rule . Available Action Rule triggers and conditions incl[...]

AXIS P5534 PTZ Dome Netw ork Camer a Ev e n t s - Use Schedule — trigger the rule according to the selected schedule, see Schedules, on page 33 . Available actions include: • Day/Night Vision Mode —s e td a ym o d e( I Rc u t fi lter on) or night mode (IR cut fi lter off). • Output Port — activate an I/O port to control an external devi[...]

AXIS P5534 PTZ Dome Netw ork Camer a Ev e n t s 8. Select Network Share from the Storage drop-down list. To add additional criteria, se lect the Additional conditions option and add additional triggers. To prevent an action from being triggered repeatedly, a Wait at least time can b e set. Enter the time in hours, minutes and s econds, during which[...]

AXIS P5534 PTZ Dome Netw ork Camer a Ev e n t s Recurrences Recurrences are used to trigge r Action Rules repea tedly, for example ev ery 5 minutes or every hour. To set up a recurrence: 1. Go to Events > Recurrences and click Add . 2. Enter a descriptive na me and recurrence patter n. 3. Click OK . To use the recurrence in an Action Rule, fi r[...]

AXIS P5534 PTZ Dome Netw ork Camer a Re c o rd i n g s Recordings T h eA x i sp r o d u c t c a nb ec o n fi gured to record video continuously or according to an action rule: • To start a continuous recording, see page 35 . • To s et up action rules, see page 32 . • To access recordings, see Recording List, on page 35 . •T o c o n fi gur[...]

AXIS P5534 PTZ Dome Netw ork Camer a Re c o rd i n g s Note If a new stream pro fi le is selected while a recording is ongoing, the reco rding will be stopped and saved in the recording list and a new recording with the new stream pro fi le will star t. All previous c ontinuous recordings will remain in the recording list until they are remove d [...]

AXIS P5534 PTZ Dome Netw ork Camer a System Options System Options Security Users User access control is enabled by default and can be con fi gured under System Options > Security > Users . An administrator can set up other users by givi ng them user names and passw ords. It i s also possible to allow anonymous viewer login, which means that[...]

AXIS P5534 PTZ Dome Netw ork Camer a System Options IEEE 802.1X IEEE 802.1X is a standard for port-based Network Admission Control p roviding secure authentication of wired and wireless network devices. IEEE 802.1X is based on EAP (Extensible Authentication Protocol). To access a network protected by IEEE 802.1X, devices must auth enticate themselv[...]

AXIS P5534 PTZ Dome Netw ork Camer a System Options To change the date and time settings, select the preferred Time mode under New Server Time : • Synchronize with computer time sets date and time according to the computer’s clock. With this op tion, date and time are set once and will not be updated automatically. • Synchronize with NTP Serv[...]

AXIS P5534 PTZ Dome Netw ork Camer a System Options AXIS Video Hosting System (AVHS) AVHS used in conjunction with an AVHS service, provides easy and s ecure Internet access to live and recorded video accessible from any location. For more information and help to fi nd a local AVHS Service Pro vider go to www.axis.com/hosting AVHS is enabled by de[...]

AXIS P5534 PTZ Dome Netw ork Camer a System Options Link-Local IPv4 Address Link-Local Address is enabled by default an d assigns the Axis product an additional IP address which can be used to access the product from other hosts on the same segment on the loca l network. The product can have a Link-Local IP and a static or DHCP-supplied IP address [...]

AXIS P5534 PTZ Dome Netw ork Camer a System Options Note This FTP server has nothing to do with the product’s ability to transfer images via FTP to other locations and serv ers. RTSP The RTSP server running in the Axis product allows a connecting client to start an H.264 stream. The RTSP port number can be changed under System Options > Networ[...]

AXIS P5534 PTZ Dome Netw ork Camer a System Options The following traps are available: •C o l d s t a r t •W a r m s t a r t •L i n k u p • Authentication failed SNMP v3 provides encryption and secure passwords. To use traps with SNM P v3, an SNMP v3 management application is required. To use SNMP v3, HTTPS must be enabled, see HTTPS, on pa[...]

AXIS P5534 PTZ Dome Netw ork Camer a System Options If the card’s status shows as failed, click Check disk to see if the problem can be found and then try Repair . To avoid fi lling the card, it is recommended to remove recordings continuously. Under Recording Settings , select Remove recordings older than and select the number of days or weeks.[...]

AXIS P5534 PTZ Dome Netw ork Camer a System Options Click Restore to reset most settings to the factory default va lues. The following settings a re not affected: • the boot protocol (DHCP or static) • the stati c IP address • the default router • the subn et mask •t h e s y s t e m t i m e • the IEEE 802.1X settings Click Default to re[...]

AXIS P5534 PTZ Dome Netw ork Camer a System Options The log levels for the System Log and the Access Log are set under System Options > Support > Logs & Reports > Con fi guration . The Access Log can be con fi gured to list a ll connections to the product (select Critical, Warning s & Info). If require d, a different log level ca[...]

AXIS P5534 PTZ Dome Netw ork Camer a Multi-Connector Cable (sold separ ately) Multi-Connector Cable (sold separately) When connecting external equipme nt to the Axis product, a multi-connecto r cable (available from Axis) is req uired in order to maintain the product’s IP rating. The multi-connect or cable can be purchased from your Axis reseller[...]

AXIS P5534 PTZ Dome Netw ork Camer a Multi-Connector Cable (sold separ ately) Connection diagram: 3.3 V max 250 mA 1 2 A B A I/O con fi gured as input B I/O con fi gured as output I/O connector DC power input AC power input 48[...]

AXIS P5534 PTZ Dome Netw ork Camer a T r oubleshooting Troubleshooting Checking the fi rmware Firmware is softwar e that determines the f unctionality of ne twork devices. One o f your fi rst actions when tro ubleshooting a problem should be to check the curr ent fi rmware version. The late st version may contain a correction that fi xes your p[...]

AXIS P5534 PTZ Dome Netw ork Camer a T r oubleshooting arp -s <IP address> <serial number> temp ping -s 408 <IP address> In Windows , type the following from a command/DOS prompt: arp -s <IP address> <serial number> ping -l 408 -t <IP address> 2. If the product does not reply within a few seconds, res tart it and[...]

AXIS P5534 PTZ Dome Netw ork Camer a T r oubleshooting The product is accessible locally but not externally Router con fi guration To con fi gure your router to allow incoming data traf fi c to the Axis product, enable the NAT-traversal feature which will attempt to automatically con fi gure the router to allow access to the Axis product, see N[...]

AXIS P5534 PTZ Dome Netw ork Camer a T r oubleshooting No images displayed on web page Problems with AXIS Media Control ( Internet Explorer only ) To enable the updating of vide o images in Internet Expl orer, set the browser to allow Acti veX controls. Also, make sure that AXIS Media Co ntrol is installed on your com puter. Installation of additio[...]

AXIS P5534 PTZ Dome Netw ork Camer a T r oubleshooting No audio Incorrect setup Check the sound card in the computer. Ensure th at mute is not selected a nd that the volume settings are correct. No audio or very poor audio quality Check that Enable audio support is selected under Setup > System Options > Security > Audio Support . Check th[...]

AXIS P5534 PTZ Dome Netw ork Camer a T echnical Speci fi cations Technical Speci fi cations Function/group Item Speci fi cat ions Model AXIS P5534 50 Hz, AXIS 5534 60 Hz Image sensor Progressive scan CCD 1/3” Lens f=4.7 – 84.6 mm, F1.6 – 2.8, autofocus, automatic day/night Horizontal angle of view: 55.2° - 3.2° Minimum illumination Color[...]

AXIS P5534 PTZ Dome Netw ork Camer a T echnical Speci fi cations Function/group Item Speci fi cat ions Security Password protection, IP address fi ltering, HTTPS encryption*, IEEE 802.1X network access control*, digest authentication, user access log *This product includes softw are develope d by the Open SSL Project for use in the Open SSL Tool[...]

AXIS P5534 PTZ Dome Netw ork Camer a T echnical Speci fi cations Function/group Item Speci fi cat ions Approvals EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1, EN 61000-6-2, EN 55024, FCC Part 15 Subpart B Class B, ICES- 003 Class B, VCCI Class B, C-tick AS/NZS CISPR 22, EN 60950-1, KCC Class B IEC 60721-4-3 Class 3K3, 3M3, EN/IEC 60[...]

User Manual Ver. M1.12 AXIS P5534 P TZ Dome Network Camera Date: December 2011 © Axis Communic ations AB, 2 011 Part No. 45 175[...]