Axis M2014-E инструкция обслуживания

USER MANUAL AXIS M2014–E Network Camera[...]

About this document This manual is intended for administrators and users of the AXIS M2014-E Network Camera, and is applicable to rmware 5.40 and later. It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this product. Some knowledge of UNIX or Linux-based syste[...]

Europe This symbol means that the product shall not be disposed of together with household or commercial waste. Directive 2012/19/EU on waste electrical and electronic equipment (WEEE) is applicable in the European Union member states. To prevent potential harm to human health and the environment, the product must be disposed of in an approved and [...]

AXIS M2014–E Network Camera Table of Contents Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

AXIS M2014–E Network Camera Hardware Overview Hardware Overview 10 11 9 8 15 14 13 12 7 3 2 1 6 5 4 1 Power indicator LED 2 Status indicator LED 3 Network indicator LED 4 SD card slot (microSD card) 5 Camera connector 6 I/O terminal connector 7 Main unit 8 Network connector 9 Control button 10 Power connector 11 Mounting rail 12 Camera unit 13 St[...]

AXIS M2014–E Network Camera Hardware Overview NOTICE NOTICE NOTICE The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network switch shall be shielded (STP) and intended for their specic use. Make sure that the network switch is properly grounded. For information about regulatory requi[...]

AXIS M2014–E Network Camera Hardware Overview Note • The Status LED can be congured to be unlit during normal operation. To congure, go to Setup > System Options > Ports & Devices > LED . See the online help for more information. • The Status LED can be congured to ash while an event is active. • The Status LED can [...]

AXIS M2014–E Network Camera Hardware Overview 14 m m 14 m m 6 1 8[...]

AXIS M2014–E Network Camera Accessing the Product Accessing the Product To install the Axis product, refer to the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are Internet Explorer with Windows, Safari with Macintosh and Firefox with other operating system[...]

AXIS M2014–E Network Camera Accessing the Product Access from the Internet Once connected, the Axis product is accessible on your local network (LAN). To access the product from the Internet you must congure your network router to allow incoming data trafc to the product. To do this, enable the NAT-traversal feature, which will attempt to a[...]

AXIS M2014–E Network Camera Accessing the Product When using 50 Hz, the maximum frame rate is limited to 25 fps. Note Power line frequency is different in different geographic regions. In the Americas, 60 Hz is usually used; most other parts of the world use 50 Hz. Local variations may apply, always check with the local authorities. The Live View[...]

AXIS M2014–E Network Camera Accessing the Product To show the manual trigger buttons in the Live View page: 1. Go to Setup > Live View Layout . 2. Under Action Buttons , select Show manual trigger button . AXIS Media Control viewer toolbar The AXIS Media Control viewer toolbar is available in Internet Explorer only. See AXIS Media Control (AMC[...]

AXIS M2014–E Network Camera Media Streams Media Streams The Axis product provides several video stream formats. Your requirements and the properties of your network will determine the type you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, and to the list of available stream proles. Other applica[...]

AXIS M2014–E Network Camera Media Streams The AMC Control Panel can be used to congure various video settings. Please see the AXIS Media Control User’s Manual for more information. The AMC Control Panel is automatically installed on rst use, after which it can be congured. Open the AMC Control Panel from: • Windows Control Panel (fro[...]

AXIS M2014–E Network Camera Media Streams Note • <ip>= IP addess • The Axis product supports QuickTime 6.5.1 and later. • QuickTime adds latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee this. 15[...]

AXIS M2014–E Network Camera Setting Up the Product Setting Up the Product The Axis product can be congured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access to all settings. • Operators have access to[...]

AXIS M2014–E Network Camera Video Video It is possible to congure the following video features in your Axis product: • Video stream. See page 17 . • Stream proles. See page 18 . • Camera settings. See page 19 . • Overlay image. See page 19 . • Privacy mask. See page 20 . Video Stream You can dene the following video stream sett[...]

AXIS M2014–E Network Camera Video Image The default image settings can be congured under Video> Video Stream . Select the Image tab. The following settings are available: • Resolution . Select the default resolution. • Compression . The compression level affects the image quality, bandwidth and le size of saved images; the lower the [...]

AXIS M2014–E Network Camera Video For quick setup, use one of the predened stream proles. Each predened prole has a descriptive name, indicating its purpose. If required, the predened stream proles can be modied and new customized stream proles can be created. To create a new prole or modify an existing prole, go to [...]

AXIS M2014–E Network Camera Video An overlay text can display the current date and time, or a text string. When using a text string, modiers can be used to display information such as the current bit rate or the current frame rate. For information about available modiers, see File Naming & Date/Time Formats in the online help . To enabl[...]

AXIS M2014–E Network Camera Video Important Adding many privacy masks may affect the product’s performance. 21[...]

AXIS M2014–E Network Camera Live View Cong Live View Cong You can customize the Live View page and alter it to suit your requirements. It is possible to dene the following features of the Live View page. • Stream Prole. See page 18 . • Default Viewer for Browser. See page 22 . • Viewer Settings. See page 23 . • Action Buttons.[...]

AXIS M2014–E Network Camera Live View Cong Browser Viewer Description AMC Recommended viewer in Internet Explorer (H.264/Motion JPEG). QuickTime H.264. Java applet A slower imaging alternative to AMC (Motion JPEG). Requires one of the following installed on the client: • JVM (J2SE) 1.4.2 or higher. • JRE (J2SE) 5.0 or higher. Windows Inter[...]

AXIS M2014–E Network Camera Live View Cong For more information about I/O ports, see I/O Ports, on page 40 . 24[...]

AXIS M2014–E Network Camera Detectors Detectors Camera Tampering Camera Tampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, sprayed or severely defocused. To send an alarm, for example an email, an action rule must be set up. To congure tampering: 1. Go to Detectors > Camera Tampering . 2. Set t[...]

AXIS M2014–E Network Camera Detectors Note Using the motion detection feature may decrease the product’s overall performance. Set Up Motion Detection Windows To set up a motion detection Include Window, follow these instructions: 1. Go to Detectors > Motion Detection . 2. Select the Congure Included Windows option and click New . Select t[...]

AXIS M2014–E Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, for example video analytics and intelligent video capabilities such as recognition, tracking, detection and counting. For information about available applications, down[...]

AXIS M2014–E Network Camera Events Events The Axis product can be congured to perform actions when different events occur, for example, start a recording when motion is detected. The set of conditions that denes how and when the action is triggered is called an Action Rule . Available Action Rule triggers and conditions include: • Applica[...]

AXIS M2014–E Network Camera Events Setting Up an Action Rule An action rule denes the conditions that must be met for the product to perform an action, for example record video or send email notications. If multiple conditions are dened, all must be met to trigger the action. The following example describes how to set up an action rule t[...]

AXIS M2014–E Network Camera Events Note A network share can also be used as a storage device for recorded video. Go to System Options > Storage to congure a network share before setting up a continuous recording or an action rule to record video. See Storage, on page 39 for more information about storage devices. To add a recipient: 1. Go t[...]

AXIS M2014–E Network Camera Recordings Recordings The Axis product can be congured to record video continuously or according to an action rule: • To start a continuous recording, see page 31 . • To set up action rules, see page 29 . • To access recordings, see Recording List, on page 31 . • To congure camera controlled storage, see [...]

AXIS M2014–E Network Camera System Options System Options Security Users User access control is enabled by default and can be congured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to allow anonymous viewer login, which means that anybody may[...]

AXIS M2014–E Network Camera System Options IEEE 802.1X IEEE 802.1X is a standard for port-based Network Admission Control providing secure authentication of wired and wireless network devices. IEEE 802.1X is based on EAP (Extensible Authentication Protocol). To access a network protected by IEEE 802.1X, devices must authenticate themselves. The a[...]

AXIS M2014–E Network Camera System Options If using a host name for the NTP server, a DNS server must be congured. See DNS Conguration, on page 36 . • Set manually allows you to manually set date and time. If using an NTP server, select your Time zone from the drop-down list. If required, check Automatically adjust for daylight saving tim[...]

AXIS M2014–E Network Camera System Options Linux/Unix syntax arp -s <IP address> <serial number> temp ping -l 408 <IP address> Linux/Unix example arp -s 192.168.0.125 00:40:8c:18:10:00 temp ping -l 408 192.168.0.125 Windows syntax (this may require that you run the command prompt as an administrator) arp -s <IP address> &l[...]

AXIS M2014–E Network Camera System Options Advanced TCP/IP Settings DNS Conguration DNS (Domain Name Service) provides the translation of host names to IP addresses. The DNS settings are congured under System Options > Network > TCP/IP > Advanced . Select Obtain DNS server address via DHCP to use the DNS settings provided by the DH[...]

AXIS M2014–E Network Camera System Options NAT traversal (port mapping) for IPv4 A network router allows devices on a private network (LAN) to share a single connection to the Internet. This is done by forwarding network trafc from the private network to the “outside”, that is, the Internet. Security on the private network (LAN) is increas[...]

AXIS M2014–E Network Camera System Options QoS (Quality of Service) QoS (Quality of Service) guarantees a certain level of a specied resource to selected trafc on a network. A QoS-aware network prioritizes network trafc and provides a greater network reliability by controlling the amount of bandwidth an application may use. The QoS setti[...]

AXIS M2014–E Network Camera System Options RTP/H.264 The RTP port range and multicast settings are congured under System Options > Network > RTP . The RTP port range denes the range of ports from which the video ports are automatically selected. For multicast streams, only certain IP addresses and port numbers should be used. Select A[...]

AXIS M2014–E Network Camera System Options Network Share Network share allows you to add network storage such as a NAS (Network Attached Storage) or any server that uses CIFS (Common Internet File System) and use them for storage of recordings. To add a network share: 1. Go to System Options > Storage . 2. Click Network Share . 3. Enter the IP[...]

AXIS M2014–E Network Camera System Options Click Default to reset all settings, including the IP address, to the factory default values. This button should be used with caution. The Axis product can also be reset to factory default using the control button, see Reset to Factory Default Settings, on page 42 . To identify the product or test the St[...]

AXIS M2014–E Network Camera System Options Axis strongly recommends that you do not use this function unless you understand the consequences. Axis Support does not provide assistance for problems with customized scripts. To open the Script Editor, go to System Options > Advanced > Scripting . If a script causes problems, reset the product t[...]

AXIS M2014–E Network Camera Troubleshooting Troubleshooting Checking the Firmware Firmware is software that determines the functionality of network devices. One of your rst actions when troubleshooting a problem should be to check the current rmware version. The latest version may contain a correction that xes your particular problem. Th[...]

AXIS M2014–E Network Camera Troubleshooting arp -s <IP address> <serial number> temp ping -l 408 <IP address> In Windows , type the following from a command/DOS prompt (this may require that you run the command prompt as an administrator): arp -s <IP address> <serial number> ping -l 408 -t <IP address> 2. If th[...]

AXIS M2014–E Network Camera Troubleshooting The IP address has been changed by DHCP IP addresses obtained from a DHCP server are dynamic and may change. If the IP address has been changed, use AXIS IP Utility or AXIS Camera Management to located the product on the network. Identify the product using its model or serial number, or by the DNS name [...]

AXIS M2014–E Network Camera Troubleshooting Lower frame rate than expected See Performance Considerations, on page 49 . Reduce the number of applications running on the client computer. Limit the number of simultaneous viewers. Check with the network administrator that there is enough bandwidth available. Check in the AMC Control Panel (H.264 tag[...]

AXIS M2014–E Network Camera Technical Specications Technical Specications Function/group Item Specications Model AXIS M2014-E Image sensor Progressive scan RGB CMOS 1/4” Lens f=2.8 mm, F2.0, xed iris, xed focus Horizontal angle of view: 81° Vertical angle of view: 44° Diagonal angle of view: 87° Light sensitivity 1.0 lux – 1[...]

AXIS M2014–E Network Camera Technical Specications Function/group Item Specications Application Programming Interface Open API for software integration, including VAPIX® and AXIS Camera Application Platform from Axis Communications; specications available at www.axis.com Includes the ONVIF specication available at www.onvif.org Suppo[...]

AXIS M2014–E Network Camera Technical Specications Function/group Item Specications Video management software (sold separately) AXIS Camera Station — Video management software for viewing and recording up to 50 cameras See www.axis.com/products/video/software/ for more software applications via partners Optional accessories AXIS T8412 Ins[...]

User Manual Ver. M1.4 AXIS M2014–E Network Camera Date: March 2013 © Axis Communications AB, 2013 Part No. 51049[...]

So zeigen Sie mit Sternen versehene Nachrichten an: 1 Tippen Sie auf der Startbildschirm auf und dann auf . 2 Drücken Sie , und tippen Sie anschließend auf Nachrichten mit Stern . 3 Die mit Sternen versehenen Nachrichten werden in einer Liste angezeigt. So suchen Sie nach Nachrichten: 1 Tippen Sie auf der Startbildschirm auf und dann auf . 2 Drü[...]

fi 55 Sij oit ust ila n lämpö til a ja il mankie rto Sijoitushuo neen lämp ötila Kylm laite on suu nniteltu m rtylle ilmastolu okall e. Ilmas toluoka n m ukaan vaihdelle n laitetta voi kytt  paikoiss a, joiden lmptila o n seuraava. Laitteen ilm astoluokka o n merkitty tyypp ikilpe en, kuva + . Huomaut us Kylm laite[...]

Geräts mit Google Kalendar™ zu synchronisieren und Anwendungen und Spiele aus Google Play™ herunterzuladen. Die in diesem Kapitel beschriebenen Dienste und Funktionen werden nicht in allen Ländern oder Regionen oder von allen Netzen und/oder Dienstanbietern unterstützt. So richten Sie ein Google™-Konto auf dem Gerät ein: 1 Tippen Sie auf [...]

fi 57 Käy ttö ä koskev ia huom aut uk si a  K un kaapp i on kytke tty toimintaan, saattaa kest  mon ta tuntia , enn en k uin s detyt lm ptilat on saavu tettu. ˜l sijoita kaa ppiin elin tarv ikkeita aikaise mmin.  K aa pin sivuje n os ittaisella lmm ittmise ll es tetn kon de n ss iv ed en m uod os [...]

So beantworten Sie eine E-Mail: 1 Tippen Sie auf der Startbildschirm auf . 2 Tippen Sie auf E-Mail . 3 Tippen Sie in Ihrem E-Mail-Posteingang auf die zu beantwortende Nachricht und tippen Sie auf . 4 Tippen Sie auf Antworten oder Allen antworten . 5 Geben Sie Ihre Antwort ein, und tippen Sie dann auf . So leiten Sie eine E-Mail weiter: 1 Tippen Sie[...]

So stellen Sie eine automatische Abwesenheitsnotiz in einem Exchange Active Sync-Konto ein: 1 Tippen Sie auf der Startbildschirm auf und dann auf E-Mail . 2 Drücken Sie , und tippen Sie anschließend auf Einstellungen . 3 Wählen Sie das EAS (Exchange Active Sync)-Konto, für das Sie eine automatische Abwesenheitsnotiz einstellen möchten. 4 Tippe[...]

"WALKMAN"-Anwendung Über die „WALKMAN“-Anwendung Optimieren Sie Ihre „WALKMAN“-Anwendung. Sie können Musik und Hörbücher anhören und anordnen, die Sie von einem Computer auf Ihr Gerät übertragen oder online gekauft und heruntergeladen haben. Um Inhalte für den der „WALKMAN“-Anwendung leicht verfügbar zu machen, könne[...]

Allgemeinere Informationen zum Anschluss des Geräts an einen Computer und zur Übertragung von Dateien finden Sie im Abschnitt Das Gerät mit einem Computer verbinden auf Seite 106. Verwenden der "WALKMAN"-Anwendung So spielen Sie Audioinhalte ab: 1 Tippen Sie auf der Startbildschirm auf und dann auf . 2 Wählen Sie in Meine Musik eine M[...]

[...]

28_ dépannage dépannage PROBLÈME SOLUTION L'appareil ne fonctionne pas du tout ou la température est trop élevée. • Assurez-vous que la fiche d’alimentation est correctement branchée. • La température indiquée sur le panneau avant est-elle correctement r églée? • L'appareil est-il directement exposé au sol[...]

So löschen Sie eine Verknüpfung: • Berühren und halten Sie in Meine Musik eine Verknüpfung, bis sie vergrößert wird und das Gerät vibriert. Ziehen Sie das Objekt anschließend in . Die folgenden Registerkarten können nicht gelöscht werden: Titel , Alben , Interpreten , Playlisten , Music Unlimited , Musik: Freunde und SensMe™ channels [...]

[...]

fi 66 Häiriö Mahdo llinen syy T oim enpide Sisvalo ei pala. LED-va laisin on via llinen . Katso k appale »Vala istus (L E D)«. Kaap in ov i oli liian kauan a uki. Sis valo sam muu noin 10 mi n ku luttua. Kun suljet laitteen oven ja avaat sen uude lleen, valo syttyy. Mik n n ytt ei pala. Virtakatko, s ulake on pal anut ; v erk [...]

[...]

pl 68 pl Spis tre ś ci plI ns t r uk cj a o bs - ug i Wskazówki bezp iecze ń stwa i wsk azó wki ost rzega wcz e Przed pierwszym w łą czeniem urz ą dzen ia Prosz  prze czy ta œ staran nie instrukcje u _ ytko wan ia i mon ta _ u! Zawier aj ł on e wa _ ne informa cje na temat ustaw ienia, u _ ytko wan ia i kon serwa[...]

pl 69 Po dczas u ż yt kowa nia  Do urz ł dz eni a ni e w ol no wk - ad a œ _ adny ch u rz ł dze / ele ktrycznych (np. grze jni kw, elekt ryczn ych k ostkar ek d o lodu itp.). Ni eb ez pi e cz e / stw o eks plozji!  Do czyszc zen ia i rozmra _ ania ni e sto s ow a œ nigd y urz ł dze / czys zc z ?[...]

pl 70 Dzieci w g ospodars twie domo w y m  O pakowa nia ani jego cz B ci nie pozo staw ia œ dzi ecio m do zabawy . Ni eb ez pi e cz e / stw o udus ze ni a sk - a d anym kar tonem i foli ł !  Ni e z ez wa la œ dz iecio m na zabaw  ur z ł dzeni em!  Prz y urz ł dzeni ach wypo sa _ onych wz[...]

4 Ein gespeicherter Favoritensender 5 Im Frequenzbereich zurückblättern, um einen Sender zu suchen 6 Sendersucher 7 Einen Sender als Favoriten speichern oder entfernen 8 Eingestellte Frequenz Verwenden Ihrer Radiosender-Favoriten Sie können die Radiosender, die Sie am meisten hören, als Favoriten speichern. Mithilfe von Favoriten können Sie sc[...]

So wechseln Sie zwischen Mono- und Stereowiedergabe: 1 Wenn das Radio geöffnet ist, drücken Sie . 2 Tippen Sie auf Stereo aktivieren . 3 Um bei Ihrem Radio erneut zur Monowiedergabe zu wechseln, drücken Sie und tippen Sie dann auf Monowiedergabe . Identifizieren von Radiotiteln mit TrackID™ Musiktitel, die im UKW-Radio Ihres Geräts gespielt w[...]

pl 73 Pod łą czenie elek try czne Gni azdk o s iec io we m usi zn ajdo wa œ si  blis ko urz ł d zenia i m usi by œ - atwo dost  pn e d la u _ y tk own ik a r wn ie _ po us tawieniu urz ł dzeni a. Urz ł dze nie s pe - nia w a ru nk i k l as y ochr onn ej I . Urz ł dzen ie po d -ł cza œ [...]

pl 74 Pane le obs ł ug i Rys unek 2 W łą czanie urz ą dz eni a Rys unek 2 Urz ł dze nie w -ł cz y œ przy cis kie m w -ł cz an ie/wy -ł cza nie 1. Rozl ega s i  d ] wi  kow y sygna - ostr zega wczy. Wska ] nik te mp era t ur y 2 mig a. Nacisn łœ prz y c isk na staw i ani a tempe ratury 4 [...]

Aufnehmen von lächelnden Gesichtern mit Smile Shutter™ Verwenden Sie die Smile Shutter™-Technologie, um ein Gesicht genau dann aufzunehmen, wenn es lächelt. Die Gesichtserkennung erfasst bis zu fünf Gesichter und wählt eines für „Smile Detection“ und den Autofokus aus. Sobald die ausgewählte Person lächelt, nimmt die Kamera automatis[...]

[...]

Ein Foto wird mit einer Verzögerung von 10 Sekunden aufgenommen, nachdem Sie auf den Kamerabildschirm getippt haben. Ein (2 Sekunden) Ein Foto wird mit einer Verzögerung von 2 Sekunden aufgenommen, nachdem Sie auf den Kamerabildschirm getippt haben. Aus Sobald Sie auf den Kamerabildschirm tippen, wird das Foto aufgenommen. Smile Shutter™ Verwen[...]

HDR Benutzen Sie die HDR-Einstellung (High-Dynamic Range), um ein Foto bei starkem Gegenlicht oder in Situationen mit scharfen Kontrasten aufzunehmen. HDR kompensiert den Detailverlust und erstellt ein Bild, das sowohl dunkle als auch helle Bereiche darstellt. Diese Einstellung ist nur im Aufnahmemodus Normal verfügbar. Weißabgleich Der Weißabgl[...]

Bildstabilisator Beim Fotografieren ist es mitunter schwierig, das Gerät ruhig zu halten. Der Stabilisator gleicht kleinere Bewegungen der Hand aus und sorgt so für eine bessere Aufnahmequalität. Geotagging Ergänzen Sie Fotos um Informationen über den Aufnahmeort. Ein Wenn Geotagging aktiviert ist, wird dem Foto die ungefähre geografische Pos[...]

pl 80 Wyposa ż enie P - k i i pojem niki w komo rze ch - od zenia in a d r z w i a c h u r z ł dzeni a mo _ na dow olnie konfigurowa œ w z a l e _ no B ci od potrzeby:  W tym c e lu p o ci ł gn łœ p - k  , unie Bœ z p rzo d u d o g ry i w yj łœ . Rysun ek 8  Po jemn[...]

pl 81 Wy łą czanie urz ą dz e nia iw y łą czanie na d ł u ż szy czas Wy łą czanie urz ą dzen ia Rys unek 1 Nacisn łœ przy ci sk w -ł cz anie / wy -ł cz ani e 1. Spr _ ar k a i o B wiet l e ni e we wn  trzne wy -ł cz aj ł si  . Wy łą czanie urz ą dzen ia na d ł u ż szy cza s Je [...]

Durch Drücken und Halten des Auslösers wird das erste Video aufgenommen, sobald die Videokamera aus dem Energiesparmodus aktiviert wurde. Nur starten (Videokamera) Durch Drücken und Halten des Auslösers wird die Videokamera aus dem Energiesparmodus aktiviert. Aus Fokusmodus Die Fokuseinstellung bestimmt, welcher Teil eines Videos scharf dargest[...]

72 73 Genere Sul touchpad trascinare un dito verso sinistr a, oppure premere il tasto freccia sinistra sul telecomando, quindi selezionare Genere . Selezionare il genere di canale TV desiderato. La categoria Genere può essere usata solo quando la Mod. Canale dell'Elenco canali è impostata su Canali aggiunti. Tuttavia, Canali aggiunti deve co[...]

[...]

1 Rasteransicht von Fotos and Videos. 2 Menüoptionen anzeigen. 3 Blättern Sie nach oben oder unten, um den Inhalt anzuzeigen. 4 Tippen Sie auf ein Foto oder Video, um es anzuzeigen. 5 Datum und Anzahl der Objekte in der Gruppe unten. So zeigen Sie Fotos und Videos in der Rasteransicht an: 1 Tippen Sie auf der Startbildschirm auf . 2 Tippen Sie au[...]

[...]

So zeigen Sie Inhalte in der Listenansicht in der Karte Meine SD-Karte an: 1 Tippen Sie auf dem Startbildschirm auf . 2 Tippen Sie auf Album > Meine Alben > Meine SD-Karte . 3 Tippen Sie auf den Ordner, den Sie öffnen möchten. Der Inhalt des Ordners wird in einem Raster in chronologischer Reihenfolge angezeigt. Videos sind durch gekennzeich[...]

So verwenden Sie ein Foto: 1 Wenn Sie ein Foto auf den Bildschirm anzeigen, tippen Sie auf den Bildschirm, um die Symbolleisten einzublenden, und tippen Sie anschließend auf > Verwenden als . 2 Wählen Sie aus der angezeigten Liste eine Option aus. 3 Befolgen Sie die entsprechenden Schritte, um ein Foto zu verwenden. So bearbeiten Sie ein Foto:[...]

So spulen Sie ein Video schnell vor und zurück: 1 Um die Bedienelemente ein- oder auszublenden, tippen Sie auf den Bildschirm. 2 Ziehen Sie die Fortschrittsleiste zum Zurückspulen nach links, zum Vorspulen nach rechts. So passen Sie die Lautstärke eines Videos an: • Drücken Sie die Lautstärketaste. So geben Sie ein Video weiter: 1 Tippen Sie[...]

[...]

[...]

[...]

82 83 Timeshift Timeshift registra temporaneamente il pr ogramma in onda. Utilizzando questa funzione, l'utente può mettere in pausa e riprendere la visione di un programma in onda e persino tornare indietr o o andare avanti nella riproduzione del progr amma live. Tuttavia, la funzione Timeshift è disponibile solo per i canali digitali. Inol[...]

Video Unlimited™ Über Video Unlimited™ Verwenden Sie den Video Unlimited™-Dienst, um sich Videos auszuleihen und zu kaufen, die Sie nicht nur auf Ihrem Android-Gerät, sondern auch auf einem PC, der PlayStation ® Portable (PSP ® ) oder der PlayStation ® 3 anzeigen können. Wählen Sie aus einer Auswahl der neuesten Hollywood-Filme, Action[...]

[...]

[...]

[...]

So suchen Sie manuell nach Wi-Fi® -Netzen: 1 Tippen Sie auf dem Startbildschirm auf . 2 Tippen Sie auf Einstellungen > Wi-Fi . 3 Drücken Sie , und tippen Sie anschließend auf Scan . 4 Tippen Sie auf den Namen des Netzes, um das Telefon mit einem Wi-Fi® -Netz zu verbinden. So fügen Sie ein Wi-Fi®-Netzwerk manuell hinzu: 1 Stellen Sie sicher[...]

[...]

So benennen Sie den mobilen Hotspot um bzw. sichern diesen: 1 Tippen Sie auf der Startbildschirm auf . 2 Tippen Sie auf Einstellungen > Mehr... > Anbindung & mobiler Hotspot . 3 Tippen Sie auf Einstellungen mobiler Wi-Fi-Hotspot > WLAN-Hotspot konfigurieren . 4 Geben Sie die Netzwerk-SSID für das Netzwerk ein. 5 Tippen Sie auf das Fel[...]

Netzwerk weiter. Die Funktion zur Freigabe von Inhalten muss auf dem Servergerät aktiviert sein und es muss Ihrem Gerät eine Zugriffsberechtigung erteilen. Außerdem muss es mit dem gleichen Wi-Fi® Netz wie Ihr Gerät verbunden sein. So spielen Sie einen freigegebenen Titel auf Ihrem Gerät ab: 1 Stellen Sie sicher, dass die Geräte, an die Sie [...]

So richten Sie die Funktion zum Weitergeben von Dateien an andere DLNA Certified™-Geräte ein: 1 Verbinden Sie das Gerät mit einem Wi-Fi® -Netz. 2 Tippen Sie auf der Startbildschirm auf und dann auf . 3 Tippen Sie auf Meine Musik , um die Musikbibliothek zu öffnen. 4 Drücken Sie , und tippen Sie anschließend auf Medienserver . 5 Ziehen Sie a[...]

92 93 P osizione schermo Menu > Immagine > Formato immagine > Zoom/P osizione Prov a ora La posizione dello schermo può essere regolata se l'opzione Formato immagine è impostata su Wide Zoom , Zoom . Zoom non è disponibile quando Formato immagine è impostata su Wide Zoom . 1. Per regolare la posizione dello schermo, selezionare Zo[...]

[...]

94 95 ● Bilanc. bianco 10p Controlla il bilanciamento del bianco regolando la luminosità dei colori rosso, v erde e blu con intervalli di 10 punti. L'opzione è disponibile solo se Modalità immagine è impostata su Film e potrebbe non essere supportata da alcuni dispositivi esterni. La funzione è disponibile solo per TV LED. Prov a ora ?[...]

96 Opzioni immagine Menu > Immagine > Opzioni immagine Prov a ora Opzioni immagine T oni colore Standard Vista pulita digitale Auto Filtro disturbo MPEG Auto Livello di nero HDMI Basso Modalità Film Off Motion Plus Standard Ottimizz. del nero Off " L'immagine visualizzata può variare in base al modello. Utilizzare Opzioni immagine[...]

[...]

[...]

98 99 Uso del prodotto come schermo PC Configurazione impostazioni video (basato su Windows 7) Affinché il prodotto funzioni in modo ottimale come schermo PC, è necessario configurare correttamente le impostazioni video. " In base alla versione di Windows e alla scheda video in uso, le pr ocedure da seguire sul PC potrebbero essere leggermen[...]

100 Impostazioni Audio di base Menu > Suono Suono Modalità audio Standard Effetto audio Audio 3D Basso Impostazioni altoparlanti Impostazioni supplementari Reset audio " L'immagine visualizzata può variare in base al modello. Utilizzare Impostazioni audio per modificare la modalità audio, attivare/disattivare l'effetto surr oun[...]

[...]

[...]

Synchronisieren von Daten auf dem Gerät Über das Synchronisieren von Daten auf dem Gerät Je nach den auf dem Gerät installierten Anwendungen können Sie Kontakte, E-Mails, Kalendertermine und andere Informationen von mehreren E-Mail-Konten, Synchronisierungdiensten und anderen Konten mit dem Gerät synchronisieren. Die Synchronisierung des Ger?[...]

104 Orologio e timer Sistema Impostazione Lingua menu English Ora Gestione disp. Soluzione Eco Prot. Auto. dopo. 2 ore Servizio dati Disabilita " L'immagine visualizzata può variare in base al modello. Utilizzare l'orologio e il timer per rendere l'uso progr ammato del televisore ancora più semplice ed efficiente. Una volta im[...]

So synchronisieren Sie Elemente manuell mit Ihrem Konto für die Facebook™- Integration: 1 Tippen Sie auf dem Startbildschirm auf . 2 Tippen Sie auf Einstellungen > Xperia™ mit Facebook . 3 Wählen Sie das Konto aus, das Sie synchronisieren möchten. 4 Drücken Sie , und tippen Sie anschließend auf Jetzt synchronisieren . So entfernen Sie e[...]

106 ● Sorgente Seleziona una sorgente del segnale dall’elenco. Specificare quale canale o sorgente dovrà essere visualizzata all'accensione del televisore. Per specificare un dispositiv o USB, è necessario che tale dispositivo sia collegato al televisore. Per ripr odurre il contenuto da una sorgente HDMI o Comp., ad esempio un lettore DV[...]

106 107 Protezione dello schermo e manutenzione Sistema Impostazione Lingua menu English Ora Gestione disp. Soluzione Eco Prot. Auto. dopo. 2 ore Servizio dati Disabilita " L'immagine visualizzata può variare in base al modello. Vi sono diverse funzioni che consentono di ridurre il consumo energetico e mantenere il televisore in buono st[...]

108 Sistema protezione plasmi Menu > Sistema > Sistema protezione plasmi Questa funzione è disponibile solo per TV PDP. Per ridurre i rischi legati alla bruciatur a dello schermo, il televisore utilizza la tecnologia di protezione Spostamento pixel . Spostamento pixel sposta leggermente l'immagine sullo schermo per evitare un uso eccess[...]

So bearbeiten Sie eine vorhandene Alarmeinstellung: 1 Tippen Sie auf der Startbildschirm auf . 2 Tippen Sie auf Wecker und Uhr . 3 Tippen Sie auf den zu bearbeitenden Alarm. 4 Tippen Sie auf Uhrzeit und blättern Sie nach oben und unten, um die Uhrzeit einzustellen. 5 Tippen Sie auf Fertig . 6 Bearbeiten Sie bei Bedarf andere Alarmeinstellungen. 7 [...]

110 P assword Sistema Soluzione Eco Prot. Auto. dopo. 2 ore Servizio dati Disabilita Generale Cambia PIN Anynet+ (HDMI-CEC) On DivX® Video On Demand " L'immagine visualizzata può variare in base al modello. Questo TV richiede una password per bloccare i canali e resettare le impostazioni ai v alori predefiniti. Cambio passw ord Menu >[...]

110 111 Funzioni supplementari Sistema Impostazione Lingua menu English Ora Gestione disp. Soluzione Eco Prot. Auto. dopo. 2 ore Servizio dati Disabilita " L'immagine visualizzata può variare in base al modello. Vi sono molte funzioni che consentono all'utente di personalizzare il televisore in base alle proprie preferenze. Modifica[...]

[...]

112 113 Logo di avvio Menu > Sistema > Generale > Logo di avvio Prov a ora Attiva/disattiv a il logo mentre il televisore si avvia. Anti sfarfallio Menu > Sistema > Generale > Anti sfarfallio Prov a ora Modifica la frequenza del cavo per interr ompere il disturbo della webcam TV . " Questa funzione è disponibile quando la we[...]

114 Smart Hub Menu > Funzioni Smart > Apri Smart Hub Prov a ora Smart Hub è il cuore di questo Smart TV Samsung. Questo servizio trasforma il televisore in un centro di intrattenimento multifunzione. Grazie al servizio Smart Hub, l'utente può na vigare in Internet, scaricare applicazioni e restare in contatto con la famiglia e gli amic[...]

[...]

[...]

So erstellen Sie ein Entsperr-PIN für den Bildschirm: 1 Tippen Sie auf der Startseite auf > Einstellungen > Sicherheit > Bildschirmsperre > PIN . 2 Geben Sie eine numerische PIN ein. 3 Tippen Sie ggf. auf , um die Tastatur zu minimieren. 4 Tippen Sie auf Weiter . 5 Geben Sie die numerische PIN erneut ein, und bestätigen Sie sie. 6 Tip[...]

Referenz Überblick über Einstellungen Machen Sie sich mit den Einstellungen des Geräts vertraut, damit Sie sie an Ihre eigenen Anforderungen anpassen können. Wi-Fi Wi-Fi® ein- oder ausschalten, nach verfügbaren Wi-Fi®- Netzen suchen oder das Wi-Fi®-Netz hinzufügen. Bluetooth Bluetooth™ ein- oder ausschalten, nach verfügbaren Bluetooth?[...]

118 119 Social Social Scelte di Amici T emi caldi Amici Videoch. " L'immagine visualizzata può variare in base al modello. Per guardare i filmati più recenti su Y ouTube o i video degli amici su Facebook e Twitter. E' inoltre possibile effettuare videochiamate utilizzando la webcam TV (venduta separ atamente). Questo servizio potre[...]

[...]

[...]

[...]

122 123 Gestione delle app E' possibile personalizzare la schermata Apps pers.. E' anche possibile gestire le applicazioni installate e configurare le impostazioni di aggiornamento delle applicazioni. Mod. Apps pers. Per spostare le applicazioni nella cartella Apps pers. A ccedere a Altre app. , selezionare Opzioni , quindi selezionare Mo[...]

Index „WALKMAN“-Widget ...............................................63 A Abspielen Musik ............................................................... 59 Akku ........................................................................ 12 Aktualisieren Ihres Geräts ..................................... 119 Alarm ...............................[...]

124 125 Fitness Fitness è un'applicazione che aiuta a stare in forma. Creare un profilo, impostare un piano di esercizi e iniziare l'allenamento seguendo un regime strutturato. Leggere e accettare i termini e le condizioni d'uso prima di usare l'applicazione Fitness. Prov a ora [ Eseguire una fase di riscaldamento o di stretchi[...]

126 W eb Browser W ebBrowser è un br owser web. W ebBrowser consente di navigare in Internet con il televisore, esattamente come si farebbe con un computer, e di guardare i programmi TV dur ante la navigazione. L'esperienza di na vigazione, tuttavia, potrebbe risultare diversa da quella di un computer. L'uso di una tastier a e di un mous[...]

126 127 Impost. app. Menu > Funzioni Smart > Impost. app. Prov a ora Per configur are le applicazioni installate sul televisore. Auto Ticker Menu > Funzioni Smart > Impost. app. > Auto Ticker Configurare i ticker selezionati per la visualizzazione automatica all'accensione del televisore. Un tick er è un servizio che visualizza[...]

[...]

4. Enter the number of copies, and then tou c h the OK button. 5. Touc h th e Start button. 122 Chapter 6 Copy ENWW[...]

Copy a multipl e-page original The do cument feed er holds up to 100 pag es (depe nding on the th icknes s of the pag es). 1. Place the document into the document feeder with the pages facing up. Adjust the paper guides to fit the size of the document. 2. From the Home screen on the pr oduct control panel, touch the Copy button. 3. Tou ch th e Copi[...]

130 131 Film e Progr ammi TV Film e Programmi TV Preferiti In primo piano Film Programmi TV Acquistato " L'immagine visualizzata può variare in base al modello. Utilizzare la funzione Film e Programmi TV per acquistare e guardare film e pr ogrammi TV senza disporre di un lettore DVD / Blu-r ay. Film e Progr ammi TV è un aggregatore di c[...]

132 Elenco consigli personalizzati Se si sta utilizzando la funzione Film e Programmi TV per la prima v olta, o non è stato effettuato l'accesso all'account Samsung, film e programmi TV nuo vi e tra i più popolari v erranno proposti nell'elenco Recommendation . L'elenco dei consigli personalizzati si basa sui contenuti visuali[...]

3. Tou ch th e Collate on (Sets in page order) option. Touch the OK button. 4. Touc h the Sta rt button. 126 Chapter 6 Copy ENWW[...]

[...]

134 135 Uso di dispositivi di memoria esterni in rete Il televisore è in grado di visualizzare direttamente i file multimediali da dispositivi di web stor age e computer e da dispositivi DLNA-enabled collegati al televisore in rete. Per visualizzare i file multimediali su un dispositiv o di memoria esterno, questo deve supportare la funzione DLNA [...]

[...]

3. Gently close the scanner lid. 4. From the Home screen on the pr oduct control panel, touch the Copy button. 5. Touc h the Sides button. 6. To make a two-sided copy from a one-sided original, touch the 1-sided original, 2-sided output button. To make a two-sided copy from a two-sided original, touch the 2-sided original, 2-sided output button. To[...]

138 Effettuare la scansione di un video Trascinare un dito sul touchpad a sinistra/destr a. Esegue la scansione dei 10 secondi precedenti o successivi. ● Premere † / … . Incrementa la velocità di riproduzione fino al 300%. P er ripristinare la normale velocità di riproduzione, premere ∂ . In alternativa, mettere il video in pausa e premer[...]

138 139 Impostazioni aggiuntive per la ripr oduzione video ● Ripetizione Selezionare il tasto a schermo Modalità Ripeti . Viene modificata la modalità di ripetizione. Ripeti uno ripete solo il file corrente, mentre Ripet tut ripete tutti i file contenuti nella cartella. ● Formato immagine Selezionare il tasto Formato immagine , quindi il form[...]

[...]

140 141 Riproduzione di foto Selezionare una foto tra quelle in elenco per visualizzarla sullo schermo. Usare il telecomando o i tasti a schermo per controllare la riproduzione di foto. T occare il touchpad o premere il tasto E del telecomando standard per visualizzare i tasti di controllo a schermo. Premere RETURN per nasconderli. P er interromper[...]

142 Mini lettore Durante la visualizzazione di foto accompagnate da musica di sottofondo, è possibile controllare la musica. Selezionare il tasto a schermo Musica di sottofondo , quindi selezionare Mini lettore . E' possibile mettere in pausa la riproduzione o saltare al brano precedente o successiv o. Impostazioni aggiuntive per la ripr oduz[...]

[...]

144 Impostazione Anynet+ (HDMI-CEC) Menu > Sistema > Anynet+ (HDMI-CEC) Prov a ora Abilita/Disabilita Anynet+ (HDMI-CEC) ● Anynet+ (HDMI-CEC) Abilita/Disabilita Anynet+ (HDMI-CEC). Disabilitando questa voce, vengono disattiv ate tutte le funzioni relative a Anynet+. Prov a ora ● Spegnimento auto Spegne tutti i dispositivi esterni allo spe[...]

Copy a book 1. Lift the scanner lid. 2. Place the book on the scanner glass with the spine aligned with the mark on the rear, center of the scanner glass. 3. Gently close the scanner lid. 138 Chapter 6 Copy ENWW[...]

4. From the Home screen on the pr oduct control panel, touch the Start button. 5. Repeat thes e steps for ea ch page that y ou want t o co py. NOTE: This product does not have the capability to distinguish left and right pages. A ssemble the copied pages carefully. ENWW Copy a book 139[...]

147 Supporto Il televisore è dotato di diversi sistemi integrati pr ogettati per supportare l'utente e il sistema TV . Gestione remota Menu > Supporto > Gestione remota Prov a ora Supporto Gestione remota e-Manual (risoluzione dei problemi) Auto diagnosi Aggiornamento software Modalità d'uso Uso domestico Contattare Samsung "[...]

148 Come funziona? Ottenere un servizio di assistenza remota Samsung T ech per il proprio televisore è una cosa molto semplice. Basta chiamare il centro assistenza Samsung e richiedere assistenza remota. Accedere al menu sul televisore, quindi accedere alla sezione Supporto. Selezionare Gestione remota e fornire il Pin all'agente. L'agen[...]

142 Chapter 6 Copy ENWW[...]

150 T est audio Menu > Supporto > Auto diagnosi > T est audio Prov a ora Usare la melodia preimpostata per verificare eventuali pr oblemi audio. Se gli altoparlanti TV non riproducono alcun suono, verificare che Seleziona altoparlante sia impostato su Altoparlante TV , quindi riprov are. Se il problema persiste, il televisore potrebbe pres[...]

Set up scan/send features The product offers the following scan and send features: ● Scan and save files to a folder on your network. ● Scan and save files to the product memory. ● Scan and save files to a USB flash drive. ● Scan and send documents to one or more email addresses. Some scan and send features are not available on the product [...]

152 Aggiorn. automatico Menu > Supporto > Aggiornamento software > Aggiorn. automatico Prov a ora Questa opzione esegue l'aggiornamento del televisore mentre è in modalità standby. In modalità standby, il televisore sembr a spento ma ha ancor a accesso a Internet. Ciò permette l'aggiornamento automatico del televisore quando [...]

152 153 Servizio dati Questa funzione è disponibile solo in Italia. Questo servizio consente all'utente di utilizzare le informazioni (testo, fermo immagini, grafica, documenti, software, ecc.) trasmesse dall'emittente. Esec. auto Serv . dati Menu > Sistema > Esec. auto Serv. dati Imposta se eseguire automaticamente o meno il Servi[...]

3. Select the category of scan and send settings that you want to configure. 4. Open the D efault Job Options menu, and configure the options. Touch the Save button to save the settings. ENWW Change default scan/send setting s from the product control panel 147[...]

154 155 HbbTV In base alla nazione, questa funzione potrebbe non essere supportata. Tramite HbbTV è possibile accedere ai servizi offerti da fornitori di contenuti di intrattenimento, online pr ovider e produttori europei. " In alcuni paesi, HbbTV è un servizio dati. " Questo servizio potrebbe essere supportato in altri paesi. " Al[...]

2. From the Home screen on the pr oduct control panel, touch the Save to N etw ork Folder button. NOTE: If prompted, type your user name and password. 3. To use one of the preset job settings, select one of the items in the Quick Sets list. 4. To set up a new job, touch the File Name: te xt field to open a keyboard, and then type the name for the f[...]

5. If necessary, touch the File Type dro p-down menu to select a different o u tput file format. 6. Touch the Add button that is below the Folder Path field to open a k eyboard, and then type the path to the ne twork folder. Use this format for the path: pat hpath Tou ch th e OK button. 150 Chapter 7 Scan/send ENWW[...]

[...]

158 159 Funzioni T eletext (In base alla nazione) La pagina dell'indice del servizio T eletext contiene informazioni sull'uso del servizio. Per visualizzare correttamente le informazioni del servizio T eletext, è necessario che la ricezione del canale sia stabile. In caso contrario, alcune informazioni potrebbero andare perdute o alcune [...]

[...]

160 161 Blocco antifurto K ensington Un blocco Kensington è un dispositiv o fisico usato per proteggere il televisore da possibili furti. Cercare l'alloggiamento Kensington sul retr o del televisore. L'alloggiamento è identificato dall'icona a forma di K . A vvolgere il cavo del blocco intorno a un oggetto tr oppo pesante per esser[...]

[...]

Send a scanne d document to one or more emai l addresses 1. Place the document face-down on the scanner glass, or place it face-up in the document feeder and a djust the paper guid es to fit the size of the document. 2. From the Home screen on the pr oduct control panel, touch the E-mail button. NOTE: If prompted, type your user name and password. [...]

164 Component Risoluzione Frequenza (Hz) 1280 x 720p 50 / 59.94 / 60 1920 x 1080i 50 / 59.94 / 60 1920 x 1080p 23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60 Canale digitale Risoluzione Frequenza (Hz) 1280 x 720p 50 / 59.94 / 60 1920 x 1080i 50 / 59.94 / 60 1920 x 1080p 25 Video/Foto Per maggiori informazioni v edere "Formato sottotitoli e con[...]

[...]

[...]

166 167 Codec Video Estensione file Contenitore Codec Video Risoluzione Frame rate (fps) Bit rate (Mbps) Codec audio *.avi Divx 3.11 / 4 / 5 / 6 *.mkv *.asf MPEG4 SP/ASP *.wmv *.mp4 AV I MKV H.264 BP/MP/HP AC 3 LPCM *.3gp *.vro ASF MP4 Motion JPEG 1920x1080 (WMV v7,v8, ADPCM(IMA, MS) A AC *.mpg *.mpeg 3GP MOV Microsoft MPEG-4 v3 MSMPEG4 v3: 1280x72[...]

168 Codec Video Altre limitazioni I Codec potrebbero funzionare in modo anomalo in caso di problemi con i dati del contenuti. In caso di errore nel contenitore o nel contenuto non sarà possibile riprodurre il video o la sua ripr oduzione non sarà corretta. Potrebbe non essere possibile ripr odurre l'audio o il video se hanno standard di bit [...]

[...]

[...]

[...]

[...]

172 173 Licenza DivX Certified® to play DivX® video up to HD 1080p, including premium content. DivX®, DivX Certified® and associated logos are trademarks of Rovi Corpor ation or its subsidiaries and are used under licence. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corpor ation. This is an offi[...]

174 Prodotto su licenza di Dolby Labor atories. Dolby e il simbolo della doppia D sono marchi di Dolby Labor atories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Marchi: Rovi e Rovi Guide sono marchi di Ro vi C[...]

[...]

176 Il funzionamento del televisore è anomalo. Possibile soluzione La qualità dell'immagine TV non sembra all'altezza di quella vista in negozio. I display mostrati in negozio sono tutti collegati a canali digitali HD (alta definizione). Se si dispone di un ricevitore satellitare/via cavo analogico, eseguire l'aggiornamento a un ri[...]

4. Touch a Tim e Form at op tion. 5. Touch the Save button to save the se ttings. 170 Chapter 8 Fax ENWW[...]

Configure fa x dialing settings 1. From the Home screen on the product control panel, scro ll to and touch the Administration button. 2. Open the following menus: ● Fax Settings ● Fax Send Settings ● Fax Send Setup ● Fax Dialing Settings Configure any of the following se ttings: Menu item Description Fax Dial Volume Use the Fax Dial Volume [...]

178 179 Connessione computer Il funzionamento del televisore è anomalo. Possibile soluzione Viene visualizzato il messaggio "Modal non supportata" Impostare la risoluzione di uscita del PC in modo che corrisponda alla risoluzione supportata dal prodotto. L'immagine è buona ma senza audio. Se si sta utilizzando una connessione HDMI,[...]

[...]

[...]

182 Servizio dati Il funzionamento del televisore è anomalo. Possibile soluzione Perché ricev o messaggi sullo schermo se non ho selezionato l'opzione Servizio dati? Se l'opzione Esec. auto Serv. dati è impostata su On , i messaggi v erranno automaticamente visualizzati a schermo durante la visione di un progr amma che supporta il Serv[...]

[...]

184 Anynet+ (HDMI-CEC) Il funzionamento del televisore è anomalo. Possibile soluzione Anynet+ non funziona. V erificare che si stia utilizzando un dispositivo Anynet+. Il sistema Anynet+ può essere utilizzato solo con dispositivi che supportano Anynet+. Solo un dispositivo esterno può essere collegato al Ricevitore . Controllare se il cav o di a[...]

Use a fax printing schedul e NOTE: Before enabling a fax-print ing schedule, a schedule must be cr eated. 1. From the Home screen on the product control panel, scro ll to and touch the Administration button. 2. Open the following menus: ● Fax Settings ● Fax Receive Settings ● Fax Printing Schedule 3. Touch the Use Fax Printing Schedule option[...]

186 W eb Bro wser 1. Selezionare W eb Browser . La schermata di na vigazione può variare in base al computer. 2. Il browser w eb non è compatibile con le applicazioni Jav a. 3. Non è possibile eseguire il download dei file. Se si tenta di eseguire il download di un file, viene visualizzato un messaggio di errore. 4. Il browser w eb potrebbe non [...]

[...]

Fax archiv ing and forwardi ng Use the fax archive feature to save archival copies of all incoming faxes, all outgoing faxes, or both, to a specified e mail address, network folder, or FTP server. Use the fax forwarding feature to forward all received faxes, all outgoing faxes, or both, to another fax number. When f ax forwarding is enabled, t he r[...]

[...]

4. Tou ch th e Speed Dial Na me field to display the keyboard. 5. Type a name for the speed dial. ENWW Create a speed dial list 183[...]

6. Type a fax number for the speed dial. NOTE: To enter additional fax numbers for a speed dial, touch the screen to the right of the last digit of the previously entered fax numbe r. When the cursor appears, touch the enter key to move the cursor to the nex t line. Repeat this step to enter all the numbers for the speed dial. Tou ch th e OK button[...]

[...]

[...]

Delete a singl e number from a speed dial list 1. From the Home screen on the product control panel, scro ll to and touch the Fax button. 2. Touch the Speed Dials button to display the Speed D ials screen. 3. Touch the One Touch Speed Dials nu mber of the list to open the k eyboard. 4. Touch the down arrow on the S pe ed Dial Name box to open the d[...]

[...]

[...]

Send a fax by using a spee d dial 1. Place the document face-down on the scanner glass, or place it face-up in the document feeder and a djust the paper guid es to fit the size of the document. 2. From the Home screen on the pr oduct control panel, touch the Fax button. 190 Chapter 8 Fax ENWW[...]

[...]

Search a speed-dia l list by name NOTE: If you do not know the unique name of the speed dial, ty pe a letter to select any portion of the list. For example, to view speed-dial names that beg i n with the letter N, type the letter N. If no matching entries exist, a messag e appears before the search shows the entry that is closest to the l e tter N.[...]

Send a fax by using fax add ress book numbers The fax address book feature allows you to store fax numbers on the product. Your Microsoft® Exchange c ontact list might also be enabled on the produc t to appear in t he fax address book. 1. From the Home screen on the pr oduct control panel, touch the Fax button. 2. Tou ch th e Address Book icon to [...]

4. Touch the names to highlight and then touch the right a rrow icon to move the highlighted names to the Fax Recipients section. 5. Touc h the OK button to return t o the Fax scr een. 6. Touc h the Sta rt button to send the fax. 194 Chapter 8 Fax ENWW[...]

Search the fax add ress book Use the fax address book search feature to c omplete a name search of the address book. 1. From the Home screen on the product control panel, touch the Fax button. 2. Touch the Address Book but ton. 3. Select the All Contacts or Loc al C ontact s option in the drop-down menu at the top of the fax address book screen. 4.[...]

Cancel a fax To cancel a current fax job, touch the Cancel Job button on the fax status screen. 196 Chapter 8 Fax ENWW[...]

Use Fax over VoI P networks VoIP technology converts the analog phone signal into digital bits. These are then assembled into packets which travel on the Intern et. The packets are converted and tr ansmitted back to analog signals at or near the destination. Transmission of information on the Internet is digital instead of analog. Therefore, there [...]

[...]

[...]

[...]

9 Manage the product ● Configure IP network settings ● HP Embedded Web Server ● HP Utility (M ac OS X) ● Use HP Web Jetadmin software ● Economy settings ● Product security features ● Upgrade the product firmwa re ENWW 201[...]

Configure IP network settings Printer sharing discl aimer HP does not support peer-to-peer networking, as the f e ature is a fun c tion of M icrosoft operating systems and not of the HP print drivers. Go to Microsoft at www.micro soft.com . View or change network settin gs Use the HP Embedded Web Server to view or change IP configuration settings. [...]

5. Touch the IP Address , Subnet M ask , or Default Gateway option. 6. Touch the first field to open a keypad. Enter the correct digits for the fie ld, and then touch the OK button. Repeat t he process for each fie ld, and then touc h the Sa ve button. Manually configure IPv6 T CP/IP parameters from the control panel Use the control-panel Administr[...]

HP Embedde d Web Serve r Use the HP Embedded Web Server to v iew product status, configure product network settings, and to manage printing functions from your computer instead of fr om the product control pane l. The fo llowing are exampl es of wh at you can do using the HP Embed ded Web Serve r: ● View product status information ● Determine t[...]

[...]

Table 9-2 HP Embedd ed Web Server Gener al ta b (co ntinu ed) Menu Description Control Panel Ad ministration Menu Shows the menu str ucture of the A dminist ration menu on the co ntrol panel. NOTE: You can configure setting s on this screen, but the HP Embedded W eb Serv er prov ide s more advanced co nfiguratio n options t han ar e available throu[...]

Scan/Digital S end tab Table 9-4 HP Embedded Web Server Scan/Digital Send tab Menu Description Address Book A dd email addresses into t he produ ct on e at a time, a nd ed it email addresses that have al ready bee n saved in the pr oduct. You can al so use th e Import /Export ta b to tra nsfer a la rge list of frequen tly-used em ail addr esses to [...]

[...]

Security tab Table 9-7 HP Embedded Web Server Securi ty tab Menu Description General Security Confi gure an admini strator password so yo u can restri ct access to ce rtain featu res on the product. Set PJL passwor d for process ing PJL comma nds. Set fi le system acces s and firmwa re upgrade sec urity. Enab le or dis able the Host U SB por t on t[...]

[...]

[...]

Menu I tem Description Commands Sends special characters or print commands to the product after the print job. NOTE: This opti on is available o nly af ter you ope n the View me nu and se lect the S how Advanced Options ite m. Printer Settings Sup plies Management Conf igures h ow th e prod uct sh ould be have when supp lies ar e nearing the end of[...]

Use HP Web Jetadmin softw are HP Web Je tadmin is an awa rd-winning, industry-leadi ng tool for efficien tly ma naging a wide variety of networked HP products, including printers, multifun ction products, and digital se nders. This single solution allows you to remotely install, monitor, maintain, troubleshoot, and secure your printing and imaging [...]

Economy settings Print with Econo Mode This product has an EconoMode option for printing drafts of documents. Using EconoMode can use less toner, which might e xtend the life of the toner ca rtridge. However, using EconoMode can also reduce pri nt qual ity. HP does not recommend the full-time use of EconoM ode . If EconoMo d e is used full-time, th[...]

● Sleep Timer Settings ● Sleep Mode/Auto off After 3. Select the app ropriate time period, and then touch the Sav e button. NOTE: The s leep-mode default time is 30 minutes. NOTE: When the product is in sleep mode, the power-button light flashes. Set the sleep schedule NOTE: You must configure the date and t ime settings before you can use the [...]

10. Configure the following settings: ● Time ● Event Da ys 11. Touch the OK button, and then touch the Save button. 216 Chapter 9 Manage the product ENWW[...]

Product security features Security statements The product supports security standards and recommended protocols that help you keep t he product secure, protect critical information on your netw ork, and simplify the way you monitor and maintain the pro duct. For in-depth information about HP's s ecure imaging and printing solutions, visit www.[...]