Barco R5976562 инструкция обслуживания

B a rc o S L M G 1 0 Pe rfo rm e r Owners Manual R9010000 R5976562/03 20/10/2004[...]

Barco nv Eve nts Noordl aan 5, B-8520 Kuurne Phone: +32 56.36.89.70 Fax: +32 56.36.88.24 E-mail: events@barco.com Visit us at the web: www.barco.com P r i n t e di nB e l g i u m[...]

Changes Barco provides this manual ’as is’ without warranty of any kind, either ex pressed or implied, including but not limited to the i mplied war- ranties or merchantability and fitness for a particular purpose. Ba rco m ay make improvements and/or changes to the product(s) and/or the program(s) described in this publication at any time with[...]

[...]

Table of con tents T ABLE OF CONTENTS 1 . S a f e t y I n s t r u c t i o n s .................................................................................................. 5 1 . 1 W a r n i n g s .............................. ....................... ...................... ................... ...................... ........... 5 1 . 2 F C C s [...]

Table of con tents 7. Random Access Adjustme nt Mode .............................................................................5 7 7 . 1 O v e r v i e w F l o w ................. ...................... ....................... ...................... ....................... ........... .. 5 7 7 . 2 P i c t u r e S e r v i c e s ...................[...]

Table of con tents 9 . S e r v i c e M o d e...................................................................................................... 1 0 1 9 . 1 B u i l t - u p ................ ....................... ...................... ....................... ...................... ........... ......... 1 0 1 9 . 2 S t a r t u p ................[...]

Table of con tents 4 R5976562 BARCOSLM G10 PERFOR MER 20/10/2004[...]

1. Safety Inst ructions 1. SAFETY INSTRUCTIONS 1.1 W arnings T o prevent personnel injury The customer should never attempt to disassemble the lamp c asing or to dispose of the lamp casing other than by returning it to BARCO. T o prevent injuries and physical da mage, always read this m anual and all labels on the system b efore connecting to the w[...]

1. Safety Instruction s Extra Safety manual Read also safety instructions in separate manual ( R597 6125 ). 6 R5976562 BARCOSLM G10 PERFOR MER 20/10/2004[...]

2. Packaging and Di mensions 2. P ACKAGING AND DIMENSIONS Overview • Projector Packaging • Box Content • Lamp Packaging • Lens Packaging • Projector Case 2.1 Projector Packag ing W ay of Packaging The projector is packed in a carton box. T o provide p rotection du ring transportation, the projector is surrounded with foam. The package is [...]

2. Packaging a nd Dimension s 2.3 Lamp Packaging W ay of packaging As it is not allowed to transport the proj ector with the lamp mounted inside the projector , this lamp is packed in a separate carton box. Save this carton box , it can be used to repack the lamp when yo u ever have to transport your projector . 2.4 Lens Packaging W ay of Packaging[...]

2. Packaging and Di mensions Image 2-3 Side view di mensions R5976562 BARCOSLM G10 PERFORMER 20/10/2004 9[...]

2. Packaging a nd Dimension s 10 R5976562 BARCOSLM G10 PERFOR MER 20/10/2004[...]

3. Installation Gu idelines 3. INST ALLA TION GUIDELINES The engines are non sealed versions. 3.1 General W ARNING : Before installing t he projector , read first the safety instruc tions. Ambient T emperature Conditions. Careful consideration of things such as image size, ambient light le vel, projector placement and type of screen to use are crit[...]

3. Installa tion Guide lines Screens are rated by how much light they reflect (or transmit i n the case of rear projection systems) given a determined amount of light projected toward them. The ‘GAIN’ of a screen is the te rm used. Front and rear screens are both rated in terms of gain. The gain of screens range from a white matte screen with a[...]

3. Installation Gu idelines T able mounted, front projection, second way . Screen PD B Floor Projector CD SH Optical axis projection lens SH SW SIDE VIEW BACK VIEW Screen TOP VIEW SW Floor Table/Top side facing floor A CD = SH/2 + B + A - 554mm Image 3-2 T able mount ed configura tion up side dow n Ceiling mounted, fron t projection Screen PD B Cei[...]

3. Installa tion Guide lines Ceiling mounted, front projection, second way . Screen PD B Ceiling Projector CD SH Optical axis projection lens SH SW SIDE VIEW BACK VIEW Screen CEILING VIEW SW Ceiling Ceiling/Top side facing ceiling A CD = SH/2 + B + A - 554mm Image 3-4 Ceiling mounted p rojector 3.3 Safety Area around projector Safety area Make sure[...]

3. Installation Gu idelines A Image 3-5 Safety a rea around the proj ector R5976562 BARCOSLM G10 PERFORMER 20/10/2004 15[...]

3. Installa tion Guide lines 3.4 Projector tilting T urning around the projection axes (E) FRONT VIEW (D)Lamp Axis 15 ° 15 ° (C) Start point Image 3-6 Tilting diagram A Allowed Projector Tilting Area B Forbidden Projector Tilting Area C Start point D Lamp axis EF r o n t v i e w Consider the starting point at the lamp side (input side), the follo[...]

3. Installation Gu idelines 3.5.1 Access to the Lamp Unit. What has to be done T o access the lamp casing, a side panel has to be removed. Necessary t ools A flatblade screwdri ver of 5 mm R e m o v i n gt h es i d ep a n e l 1. Turn with a screwdriver the side panel lock screw a quarter turn counter clockwise. (image 3-7) 2. Pull the right side of[...]

3. Installa tion Guide lines Necessary t ools Flatblade screwdriver of 5mm or Nut driver 8mm Installin g the lam p unit 1. Remove the lock nut on the 3 spa cer screws (A). (image 3-9) 2. Line up the lamp unit guides with the guides on the projector f rame (B) and push the unit into the frame until it fits. (image 3-10) 3. Secure the position of the[...]

3. Installation Gu idelines Image 3-10 Inserting the lamp Image 3-1 1 Securing the lamp 3.5.3 Reinstall ing the Side Panel What has to be done After the new lamp unit has been installed, the side panel has to be remounted. Necessary t ools A flatblade screwdri ver of 5 mm Reinstall ing the side panel 1. Move the cover guides under the back cover an[...]

3. Installa tion Guide lines Image 3-12 Mounting the side cover Image 3-13 Closing the side cover Image 3-14 L o c k i n gt h es i d ec o v e r 3.6 Re-adjusting the lamp position i n the lamp casing W ARNING : As the p rojector has to be open ed, this proced ure has to be performed by qu alified service tech- nician. Why With higher run times, the [...]

3. Installation Gu idelines Suggestion Lamp runtime is 105 hours It is advisable to adjust the Z-axis of the lamp to obtain maximum light output (see owners manual) <ENTER> to confirm Menu 3-1 The user can now adjust the Z-axis by following the next procedure. How to readj ust. 1. On the side of the inputs, turn the retaining bolt a quarter c[...]

3. Installa tion Guide lines A Image 3-16 C AUTION : Never turn the other screws ! These are factory aligned. 3. 7 Le nses O verview • Lenses • Lens selection • Lens formulas • Lens Installation • Clean ing the lens 3.7.1 Lenses A vailable l enses TLD(1.6–2.0:1) R984 0670 TLD(2.0–2.8:1) R9840680 TLD(2. 8–5.0:1) R9840690 TLD(1.2:1) R[...]

3. Installation Gu idelines TLD HB(2.0–2.8:1) R9842080 TLD HB(2.8–5.0:1) R9842100 TLD HB(5.0–8.0:1) R9842120 3.7.2 Lens selec tion How to s elect ? 1. Determine the required screen width. 2. Determine the a pproximate position of the projector in the pr ojection room with regard to the scre en and measure the projector- screen distance (PD). [...]

3. Installa tion Guide lines 3.7.4 Lens Install ation How to insta ll ? Follow the next procedure: 1. Remove th e foam rubber in the opening of the lens holder . 2. T ake the lens assembly out of its packing material and remove the lens caps on both sides. 3. Move the handle (A) of the lens anchor system to the right. (image 3-17) 4. Push the lens,[...]

3. Installation Gu idelines 3.8 Battery Installation in the RCU How is the batte ry delivered ? A battery (not yet installed to save the battery life time) is delivered inside the plastic bag with the power cord. How to insta ll ? 1. Remove the batt ery cover on the backside of the remote control by pushing the indicated handle a little towards the[...]

3. Installa tion Guide lines Image 3-21 Stacking two projectors Image 3-22 Closing the riggin g sockets A Image 3-23 Mounting the securit y chain Image 3-24 Mounting the security hoo k 26 R5976562 BARCOSLM G10 PERFOR MER 20/10/2004[...]

3. Installation Gu idelines C B B Image 3-25 Mounting the security hook (de tail) How to open a secured rigging poi nt? 1. Push the ring (A) of the first projector downwards and hold it in that position. (image 3-26) 2. Turn the locked part (B) of the second projecto r a quarter counter clockwise and move it upwards. A B Image 3- 26 Opening t he ri[...]

3. Installa tion Guide lines 3.10 Rigging points and Accessories Clamps Slots are made in the carry handle frame for easy inserting the overlockers and for easy adjusting the clamps position so that this position matches with the rigging p oints. Consult a professional structural engineer prior to suspe nding th e ceiling mount from a structure not[...]

3. Installation Gu idelines How to mount t he Overlockers to th e truss? T o mount the overlocker to the truss, handle as follow : 1. Open the fixation han dle. (image 3-30) 2. Hook the clamp arou nd the tube. The trigger automatically shuts the clamp. 3. Close the fixation handle and secure it by turning the hand screw . (image 3-31) Image 3-30 Op[...]

3. Installa tion Guide lines 30 R5976562 BARCOSLM G10 PERFOR MER 20/10/2004[...]

4. Connecti ons 4. CONNECTIONS Overview • Power connection • Switching on • Switching to standby • Switching off • Input Source Connections • Communication Connections 4.1 Power connection AC Power cord connection Use the supplied power cord to connect your projector to the wall outlet. Plug the female power connector into the male conn[...]

4. Connecti ons Lamp run time indica tion while running When the total run time of the lamp is 30 hours less then 1000, the following warning message will be displayed for 1 minute. This warning message will be repeated every 30 min utes. Pre ss EXIT to remove the message before the minute is over . Remaining Lamp run time 20h Image 4-2 When the to[...]

4. Connecti ons 4.3 Switching to standby H o wt os w i t c ht os t a n d b y ? 1. Press Standby to switch the projector to standby . 4.4 Switching off How to swi tch off the pro jector? 1. Press first Standby . 2. Let cool down the p rojector until the fans stop blowing, at least 15 min. 3. Switch off the projector with the power switch. 4.5 Input [...]

4. Connecti ons slot 1 RGB/Component slot 2 Video slot 3 not used slot 4 not used When using a RCVDS05, it is recommended to use a 5-cable output module in the RCVDS. The outputs of this module has to be connected to slot 1 of the projector . T o switch the project or in the 5-cable mode see "Fixed slot (slot 1 & 2)", page 35. 4.5.3 I[...]

4. Connecti ons How to select the new installed module? The new installed module can be selected with the digit buttons on the RCU or the local keyp ad. 4.5.4 Fixed slot (slo t 1 & 2) Where to find? Slot 1 & 2 has 5 BNC input terminals for 5 cable input and a DVI plug for DVI input. Slot 1 has also an DVI output for loop through to a second[...]

4. Connecti ons 5. Press ENTER . The internal system will scan the inputs and displays the result in the Input Slots menu. 6. Push the cursor key ↑ or ↓ to select th e first or second slot. (menu 4-6) ADJUSTMENT MODE Select a path from below : RANDOM ACCESS INSTALLATION SERVICE Select with ↑ or ↓ then <ENTER> <EXIT> to return Me[...]

4. Connecti ons OUT IN On R9840450 HD SDI DIGITAL MODULE OUT IN On 9840110 SDI DIGITAL INPUT COMM PORT TRIGGER OUT RS232/422 OUT RS232/422 IN IR-Receiver Diagnostic Code Green Operation Red Stand-by IR Sync OK Hardwired remote CTRL 1 Hardwired remote CTRL 2 Two way hardwired remote CTRL 3 On On On On DIGITAL VIDEO SOURCE Digital Video DVI INPU T DV[...]

4. Connecti ons OUT IN On R9840450 HD SDI DIGITAL MODULE OUT IN On 9840110 SDI DIGITAL INPUT COMM PORT TRIGGER OUT RS232/422 OUT RS232/422 IN IR-Receiver Diagnostic Code Green Operation Red Stand-by IR Sync OK Hardwired remote CTRL 1 Hardwired remote CTRL 2 Two way hardwired remote CTRL 3 On On On On DIGITAL VIDEO SOURCE Digital Video DVI INPU T DV[...]

4. Connecti ons OUT IN On R9840450 HD SDI DIGI TAL MODULE P R P B On COMM PO RT Ethernet RS232/422 OUT RS232/422 IN IR-Receiver Diagnostic Code Green Operation Red Stand-by IR Sync OK Hardwired remote CTRL 1 Hardwired remote CTRL 2 Two way hardwired remote CTRL 3 On On On On DVI INPUT DVI INPUT DVI OUTPUT High Bandwidth 5 CABLE INPUT High Bandwidth[...]

4. Connecti ons 4.6 Communication Connections Overview • RS232 (RS422) Connection • Linked System • Communication with peripherals • Network connect ion 4.6.1 RS232 (RS422) Connection Applic ation 1. Remote control : - e asy adjustment of projector via an IBM PC (or compatible) or MAC connection. - a llow storage of multiple projector confi[...]

4. Connecti ons 45678 9 123 45678 9 1 Pin Number Pin Number DB9 Female Connector DB9 Female Connector 23 Image 4-8 Make a Custom Null Modem Cable R5976562 BARCOSLM G10 PERFORMER 20/10/2004 41[...]

4. Connecti ons To next COMM 800 S p litte r COM 800 Splitter 1 (R9827941) Front Slave 1 TO SWITC HER COMM 800 Splitter To Slave 2 To Slave 3 Custom Null Modem Cable TO IR R ECEIVER Front Slave 4 To Slave 5 To Slave 6 TO SWITC HER COMM 800 Splitter TO IR R ECEIVER Back TO PRO J.1 TO PR OJ.2 T O PROJ.3 TO PRO J.4 Back TO PRO J.1 TO PROJ.2 TO PRO J.3[...]

4. Connecti ons 4.6.3 Communication wi th peripherals What is possible wit h an RCVDS05 connected. • Up to 20 inputs with the RCVDS 05 and 90 inputs when RCVDS’s are linked via the expansion module. • Serial communication with the projector . • Remote control buttons on the RCVDS to control the projector (source selection and analog setting[...]

4. Connecti ons OUT IN On R9840450 HD SDI DIGITAL MODULE OUT IN On 9840110 SDI DIGITAL INPUT COMM PORT TRIGGER OUT RS232/422 OUT RS232/422 IN IR-Receiver Diagnostic Code Green Operation Red Stand-by IR Sync OK Hardwired remote CTRL 1 Hardwired remote CTRL 2 Two way hardwired remote CTRL 3 On On On On DVI INPU T DVI INPU T DVI OUTPUT High Bandwidth [...]

5. Getting Started 5. GETTING ST ARTED 5.1 RCU & Local keypad How controlling t he projector ? The projector can be controlled by the local keypad or by the remote control unit. Location of the loca l keypad ? The local keypad is located on the input side of the projector . Remote control funct ions. This remote control includes a ba ttery powe[...]

5. Getting Star ted 1 Barco key selection key , to get direct access to the lens a djustment menus. 2 ADJ ADJUST key , to enter or exit the adjustment mode. 3 Address key (recessed key), to enter the address of the projector (between 0 and 9). Press the recessed address key with a pencil, followed by pressing one digit button between 0a n d9 . 4 ST[...]

5. Getting Started - + - + - + - + - + 0 9 7 8 6 5 4 3 2 1 ENTER 32a PAUSE - + PHASE FREEZ TEXT EXIT ADJ STBY SHARPNESS TINT COLOR BRIGHTNESS CONTRAST HELP ? COLOR PHASE SHARPN TINT BRIGHTN STANDBY ENTER TEXT EXIT PAUSE 2 1 4 3 5 6 8 0 9 7 CONTRAST A Image 5-2 Lamp Run time indication see chapter "4. Connections", "Switching on"[...]

5. Getting Star ted ERROR DMD out of operating temperature range Automatic shutdown is activated Menu 5-1 5.4 Quick Set Up A djustments Overview • Quick Language Change • Quick Lens Adjustment • Quick On Screen Color change 5.4.1 Quick Language Change What can be done? Only if different on screen languages are avai lable, these can be changed[...]

5. Getting Started LENS ADJUSTMENT ZOOM/FOCUS ZOOM with or , FOCUS with or <ENTER> to shift <EXIT> to return Image 5-3 Press the selection key * to switch to a nother pattern. D ifferent patterns are available. Quick s hift adju stment 1. Press the Selection key * , Barco key . The zoom/focus menu will be displayed (image 5-3). 2. Press[...]

5. Getting Star ted 6. Push the cursor key ↑ or ↓ to highlight Highlighted item color . 7. Press ENTER to toggle betw een red, green and yellow. ADJUSTMENT MODE Select a path from below : RANDOM ACCESS INSTALLATION SERVICE Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 5-5 INSTALLATION INPUT SLOTS 800 PERIPHERAL SOURCE SW[...]

5. Getting Started OUT IN On R9840450 HD SDI DIGITA L MODULE OUT IN On 9840110 SDI DIGITAL INPUT COMM PORT 10/(100) BASE-T RS232/422 OUT RS232/422 IN IR-Receiver Diagnostic Code Green Operation Red Stand-by IR Sync OK Hardwired remote CTRL 1 Hardwired remote CTRL 2 Two way hardwired remote CTRL 3 On On On On RCU DVI INPU T DVI INPU T DVI OUTPUT Hig[...]

5. Getting Star ted Directly to one of the IR sensors When using the wireless remote control, make sure you are within th e effective operating distance (30m, 100ft in a straight line). The remote control unit will not function properly if strong light strike s the sensor window or if there are obstacles between the remote control unit and the proj[...]

5. Getting Started Common Addres s Every projector has a common address ’0’ or ’1’. The c hoice between ’0’ and ’1’ can be selected in the Service mode. 5.6.2 Displaying and Pro gramming addresses Displaying the P rojector Address on the Scr een. 1. Press Address key (recessed key on the RCU ) with a pencil. The projector ’s addre[...]

5. Getting Star ted T o restart the image : •P r e s s Pause key . •P r e s s EXIT key • Select a source number . The Stand-by Ke y When the Stand-by key is pressed, the image projection is stopped and the projector goes to stand-by . T his situation is used when a projection stop is planned for a longer period. 54 R5976562 BARCOSLM G10 PERFO[...]

6. St art up of the Adjust ment mode 6 . S T A R TU PO FT H EA D J U S T M E N TM O D E 6.1 Start up Possible paths There are 3 possible paths to follow once in the Adjustment mode. They are : • Installation - Installation should be selected if a new input modu le is installed or a new source is connected to an e xisting input module. Also when t[...]

6. St art up of the Adjustme nt mode Entering your password 1. The first digit position is h ighlighted. Enter the first digit. (menu 6-2) The highlighted square jumps to the next position. 2. Continue with the other digits E x a m p l e: 2319 When your password is correct, you gain access to the selected item. When your password is wrong. The erro[...]

7. Rand om Access Adjustment Mode 7. RANDOM ACCESS ADJUSTMENT MODE Overview • Overview Flow •P i c t u r e S e r v i c e s • Picture T uning • Geometry • ScenergiX • Picture in Picture (PiP) • Save Changes 7.1 Overview Flow Overview RANDOM ACCES ADJUSTMENT MODE PICTURE TUNING COLOR TEMPERATURE GAMMA DECODING DYNAMIC COLOR DEPTH NOISE [...]

7. Rand om Access Adjustment Mode Start up 1. Push the cursor key ↑ or ↓ to highlight Random Access . (menu 7-1) 2. Press ENTER . (menu 7-2) ADJUSTMENT MODE Select a path from below : RANDOM ACCESS INSTALLATION SERVICE Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 7-1 RANDOM ACCESS ADJUSTMENT MODE FILE SERVICE PICTURE TU[...]

7. Rand om Access Adjustment Mode Possible file Manip ulations The following file manipulations are possible : • Load : installation of a file for a new source. • Edit : editing a loaded file to the source specs. • Rename : renaming a file. • Copy : copying a file. • Delete : deleting a file • Options : way of sorting the files. 7.2.3 S[...]

7. Rand om Access Adjustment Mode H o wt ol o a daf i l e? 1. Push the cursor key ↑ or ↓ to select the best fitting file. (menu 7-7) 2. Press ENTER to selec t. A confirm Load file menu will be displayed with the newly created file and the one on which the new file is based on. (menu 7-8) 3. Press ENTER to confirm the new creation or EXIT to ret[...]

7. Rand om Access Adjustment Mode 7.2.5.2 Changing the settings Differ ent methods The 3 different methods to change a setting will be described hereafter . These methods are: • with the numeric keys on the remote control. • with the arrow keys selecting the changing digit. • with the arrow keys counting up or down. How to change a set ting w[...]

7. Rand om Access Adjustment Mode V e rtical Start numb er of lines between the start of the input signal and start of the image on the screen. Interlaced [On] or [Off] this selection is automatically filled when active file has to be edited. If the image is wrong due to mismeasurement, use the ENT ER key to toggle between [On] and [Off]. (for inte[...]

7. Rand om Access Adjustment Mode V e rtical refresh [sync/async] The way of updating the image information. Not available for P AL-NTSC-SECAM sources. This option will be displayed in gra y . • For sources with a vertical frequency up to 60 Hz : the vertical refresh rate is the same as the vertical frequency of the incoming source. This i s a ne[...]

7. Rand om Access Adjustment Mode 7.2.6 Rename Start Up T o change the name of a selected file : 1. Push the cursor key ↑ or ↓ to highlight Rename . (menu 7-13) 2. Press ENTER . The Rename selection menu will be displayed. (menu 7-14) 3. Push the cursor key ↑ or ↓ to select a file name. 4. Press ENTER to selec t. The Rename file menu will b[...]

7. Rand om Access Adjustment Mode 7.2.7 Copy Start Up T o copy the name of a selected file : 1. Push the cursor key ↑ or ↓ to highlight Copy . 2. Press ENTER . The Copy selection menu will be di splayed. (menu 7-17) 3. Push the cursor key ↑ or ↓ to select a file name. 4. Press ENTER to selec t. The Copy file menu will be displayed with the [...]

7. Rand om Access Adjustment Mode 4. Press ENTER to selec t. If [all] is selected, your password has to be entered before all files will be deleted. A confirmation menu "Delete file ’file name’?" is displayed. (menu 7-22) 5. Press ENTER to delete the file, press EXIT if you want to keep it. Note: The active file cannot be deleted. FIL[...]

7. Rand om Access Adjustment Mode 7.3 Picture T uning Overview •S t a r t u p •C T I • Color T emperature • Gamma • Decoding • Dynamic Color Depth • Noise Reduction • Input Balance 7.3.1 Start up Start up T o improve the image quality , the items in the Pi cture Tuning m enu can be toggled or adjusted. T o start up th e Picture T un[...]

7. Rand om Access Adjustment Mode 7.3.3 Color T emperature A vailable Color tempera tures • Projector white • Broadcast 3200K • Film 5400K • Video 6500K • Computer 9300K • Custom balance Start Up 1. Push the cursor key ↑ or ↓ to highlight Color T emperature . (menu 7-28 ) 2. Press ENTER to selec t. The color temperature selection me[...]

7. Rand om Access Adjustment Mode Changing the gamma val ue 1. Push the cursor key ↑ or ↓ to highlight Gamma . (menu 7-30) 2. Press ENTER to selec t. 3. Change the gamma value by pushing the cursor ke y ← or → until the desired value is reached. Note: Default value of gamma : 2.2 4. Press EXIT to return to th e Picture T uning menu. PICTURE[...]

7. Rand om Access Adjustment Mode Changin g the Dynam ic Color depth va lue. 1. Push the cursor key ↑ or ↓ to highlight Dynamic Color Depth . (menu 7-32) 2. Press ENTER to selec t. 3. Change the value by pushing the cursor key ← or → until the desired dark color saturation is reached. 4. Press EXIT to return th e Picture T uning menu. PICTU[...]

7. Rand om Access Adjustment Mode Before starting the Input Balance functi on, generate a sign al with dominant black an d white areas. 7.3.8.1 Input Balance for RGB input signals Step to be taken for RGB i nput signals T o adjust the input balance, the following steps have to be executed in the following order : 1. Start with the black balance. 2.[...]

7. Rand om Access Adjustment Mode 7.3.8.2 Input Balance for YUV signals Steps to be take n for YUV 1. Is the input balance menu alre ady activated ? If yes, go to step 4 If no, go to step 2 2. Push the cursor key ↑ or ↓ to highlight Input Balance . (menu 7-37) 3. Press ENTER to selec t. The Input Balance menu will be displayed. (menu 7-38) 4. P[...]

7. Rand om Access Adjustment Mode 7.4 Geometry Overview • Introduction • Geometry start up •S h i f t •S i z e • Side Keystone •B l a n k i n g • Aspect Ratio • Geometry Options 7.4.1 Intr oduction Introduction An adjustment can be done as follow : 1. Using the cursor key to adjust 2. Entering the value with the digit ke ys. Therefo[...]

7. Rand om Access Adjustment Mode Image 7-4 Shift adjust ment A Shift to the left B Shift to the r ight C Shift upwards D Shift do wnwards How to sh ift the ima ge ? 1. Push the cursor key ↑ or ↓ to highligh t Shift . (menu 7-42) 2. Press ENTER to selec t. 3. Push the cursor key ↑ or ↓ to sh ift the image in a vertical direction. Push the c[...]

7. Rand om Access Adjustment Mode When adjusting the vertical size, Th e upper side of the image is fixe d (table and ceiling mounted configura tions) and only the lower side can be moved to its exact position. When adjusting the horizontal size, the left side of the image is fixed and only the right side can be moved to its exact position. Image 7[...]

7. Rand om Access Adjustment Mode Image 7-6 Side Keystone Side keystone adjustment 1. Push the cursor key ↑ or ↓ to highlight Side Keystone . (menu 7-44) 2. Press ENTER to selec t. 3. Push the cursor key ← or → to adjust the keystone of the image. When the upper part of the image is wider than the lower pa rt of the image, push the cursor k[...]

7. Rand om Access Adjustment Mode Image 7-7 Blanking A T op blanking B Bottom blanking C Left blanking D Right blanking Adjusting th e blanking. 1. Push the cursor key ↑ or ↓ to highlight Blanking . (menu 7-45) 2. Press ENTER to display the blanking menu. (menu 7-46) 3. Push the cursor key ↑ or ↓ to highlight the desire d blanking. 4. Press[...]

7. Rand om Access Adjustment Mode How to set up the des ired aspect ratio ? 1. Push the cursor key ↑ or ↓ to highlight Aspect R atio . (menu 7-47) 2. Press ENTER to scroll between [5:4], [4:3], [16:9], [2.35], [1.88] or [1.78]. GEOMETRY SHIFT SIZE SIDE KEYSTONE BLANKING ASPECT RATIO [4:3] OPTIONS Select with ↑ or ↓ then <ENTER> <EX[...]

7. Rand om Access Adjustment Mode 7.5.1 Order informati on Order numbers SLM G5 R9840880 SLM R6 R9840890 SLM G8/G10 R9841500 SLM R8/R10/R9+/R12+ R9841510 7.5.2 Intr oduction When available ? ScenergiX is only available as an option, some menu items will be grayed out when this option is not installed. Why Sce nerg iX ? When working in a multichanne[...]

7. Rand om Access Adjustment Mode 7.5.3 Preparati ons ScenergiX Preparati ons T o ensure proper Scene rgiX adjustment, be sure that the follo wing adjustments are done perfectly on all projectors: • Convergence (Electronic Convergence). • Geometry • Color Matching (Color T empera ture, Input Balance, Gamm a) 7.5.4 Scenergi x How to activa te [...]

7. Rand om Access Adjustment Mode Horizontal Resolution source : number of active pixels of the source. Adjustment of Ac tive pixels (Pact) o f the first project or 1. Go to File –> Edit menu of first projector . 2. Enter value for horizontal active (= Pact) as follows : Pact = [(Horz. resolution of 1 projector)/(T otal hor z. screen resolutio[...]

7. Rand om Access Adjustment Mode Adjustment of Acti ve lines (Lact) of second project or 1. Go to File –> Edit menu o f second projector . 2. Enter value for vertical act (= Lact) as follows : Lact = [(V ert.. resolu tion of 1 projector)/(T otal ve rt. screen resolution)] x (vert. resolution source) 3. Vertical start (= Lstart) = original sta[...]

7. Rand om Access Adjustment Mode Image 7-12 Width selec tions Image 7-13 Width set up for projector 1 R5976562 BARCOSLM G10 PERFORMER 20/10/2004 83[...]

7. Rand om Access Adjustment Mode Image 7-14 Width set up for projector 2 7.5.8 Adjusting the bl ack level of the imag es Why For dark images, the overlap zone will be brighter then the rest of the images. Therefore we can rise the black level of the remaining image (exclu ding the overlap zone). How to adjus t? 1. Push the cursor key ↑ or ↓ to[...]

7. Rand om Access Adjustment Mode 7.6 Picture in Picture ( PiP) Overview • Introduction to PiP • Picture in Picture activation • Picture in Picture source • Position of Picture in Picture window • Set up of the Quick Selection 7.6.1 Introduct ion to PiP PiP PiP stands for "Picture in Picture" and allows to display multiple windo[...]

7. Rand om Access Adjustment Mode 7.6.2 Picture in Pictu re activation How to activate P IP? 1. Push the cursor k ey ↑ or ↓ to highlight PIP . (menu 7-54 ) 2. Press ENTER to selec t. The PIP menu will be displayed. (menu 7 -55) 3. Push the cursor key ↑ or ↓ to highlight Status . 4. Press ENTER to toggle between ON and OFF . ON PIP is active[...]

7. Rand om Access Adjustment Mode How to pos ition? 1. Push the cursor key ↑ or ↓ to highlight Position . (menu 7-57) 2. Press ENTER to toggle bet ween T op-Left , T op-Right , Bottom-Left or Bottom-Righ t. PIP STATUS [ON] SOURCE 01 POSITION [Top-Left] QUICK SELECT [OFF] Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 7-57[...]

7. Rand om Access Adjustment Mode 88 R5976562 BARCOSLM G10 PERFOR MER 20/10/2004[...]

8. Installa tion Mode 8. INST ALLA TION MODE Overview • Start up of the Installation mode • Input Slots • 800 peripheral • Source Switching •N o S i g n a l • Contrast Enhancement • Convergence • Configuration • Lens Adjustment • Quick Access Keys •O S D • Internal Patterns 8.1 Start up of the Installation mode Start up 1. P[...]

8. Inst allation Mo de T o view or the change the input configurati on. 1. Push the cursor key ↑ or ↓ to highlight Input Slots . (menu 8-3) 2. Press ENTER to selec t. The input slots menu will be displayed. (menu 8-4) INSTALLATION INPUT SLOTS 800 PERIPHERAL SOURCE SWITCHING NO SIGNAL CONTRAST ENHANCEMENT CONVERGENCE CONFIGURATION LENS QUICK ACC[...]

8. Installa tion Mode 8.3 800 peripheral Overview • Defining the output module of the RCVDS05. • Defining the Infrared Communication protocol • CLO using Comm 800 8.3.1 Defining the output modul e of the RCVDS05. Which module are avail able? When a RCVDS05 is connected to the projector , the type of output module of this RCVDS05 has to be def[...]

8. Inst allation Mo de 8.3.3 CLO using Comm 800 What can be done? CLO can be activated in a linked system setup usi ng the COM800 Protocol + Ports. By using the CO M800 Protocol + Ports, the RS232 Ports can be used for a RS232 lin ked setup, CLO is received through the COM800 Ports, general RS232 comm ands are received through the RS232 Ports. How [...]

8. Installa tion Mode Image 8-1 Example of seamless switching with Fad e effect. When an effect is selected within seam less source switching, wait until the effect is terminated before sw itch- ing to another sour ce (± 2 seconds). 8.5 No Signal Overview • Changing the Background Color • Changing the Shutdown Setting • Changing the Shutdown[...]

8. Inst allation Mo de 8.5.2 Changing the Shutdown Sett ing How to change ? 1. Push the cursor key ↑ or ↓ to highlight No Signal . (menu 8-14) 2. Press ENTER to selec t. The no signal menu will be displayed. (menu 8-15) 3. Push the cursor key ↑ or ↓ to highlight Shutdow n .menu 8-15 4. Press ENTER to toggle between [O n] or [Off]. INSTALLAT[...]

8. Installa tion Mode T o change the Contrast Enhancement value 1. Push the cursor key ↑ or ↓ to highlight Contrast Enhancement . (menu 8-18) 2. Press ENTER to selec t. The contrast enhancement menu will be displayed. (menu 8-19) 3. Push the cursor key ↑ or ↓ to highlight the desired contrast enhancement, normal or high. 4. Press ENTER to s[...]

8. Inst allation Mo de Set up the Correct Configurat ion 1. Push the cursor key ↑ or ↓ to highlight Configuration . (menu 8-23) 2. Press ENTER to selec t. The configuration menu will be displayed. INSTALLATION INPUT SLOTS 800 PERIPHERAL SOURCE SWITCHING NO SIGNAL CONTRAST ENHANCEMENT CONVERGENCE CONFIGURATION LENS QUICK ACCESS KEYS OSD INTERNAL[...]

8. Installa tion Mode How to Zoom/Focus ? 1. Push the cursor key ↑ or ↓ to select Zoom/Focus. (menu 8-26) 2. Push the cursor key ↑ or ↓ to zoom and ← or → to focus the image.see "Quick Set Up Adjustments", page 48 3. When finished, press EXIT to return to the lens adjustment menu or press ENTER to go to the shift function. LEN[...]

8. Inst allation Mo de Options The zoom/focus and shift can be set the same for all files. 1. Push the cursor key ↑ or ↓ to highlight Op tions . (menu 8-28) 2. Press ENTER to selec t. The Lens Options menu will be displayed. (menu 8-29) 3. Press ENTER to toggle between ’Y es’ or ’No’. [Y es] all lens settings will be the same for all fi[...]

8. Installa tion Mode 8.1 1 OSD Overview • Color Settings • Menu Position 8.1 1.1 Color Settings How to change 1. Push the cursor key ↑ or ↓ to highligh t OSD . (menu 8-32 ) 2. Press ENTER to selec t. 3. Push the cursor key ↑ or ↓ to highlight Highlighted item color . (menu 8-33) 4. Press ENTER to toggle betw een Y ellow , R ed and Blue[...]

8. Inst allation Mo de Av a i l a b l e p a t t e r n s - Outline -H a t c h - C olor bars - Multiburst - C hecker board - Pa ge Char - Alpha numeric char How to se lect an intern al patterns? 1. Push the cursor key ↑ or ↓ to highlight Internal Patter ns . (menu 8-36) 2. Press ENTER to selec t. The internal patterns menu will be displayed. (men[...]

9. Service Mode 9. SER VICE MODE 9.1 Built-up Built-up The service menu is built-up in two parts which are connected together with the ’mo re’ item. If the desire d item is not in the list of the displayed menu, select ’more’ with the cursor key and push ENTER to display the other items in the service menu. 9.2 Start up Start up 1. Push the[...]

9. Service Mode Start Up 1. Push the cursor key ↑ or ↓ to highlight Ide ntification . (menu 9-4) 2. Press ENTER to display the Identification screen. (menu 9-5) SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS SERIAL COMMUNICATION NETWORK LAMP DIMMING MORE... Select with ↑ or ↓ then <ENTER> <EXIT> to r[...]

9. Service Mode Image 9-1 Image 9-2 Access password switch Image 9-3 Metal top cover Image 9-4 H ow to change the password ? 1. Push the cursor key ↑ or ↓ to highlight Change Password . (me nu 9-6) 2. Press ENTER to display the C hange Password menu. (menu 9-7) Note: Only possible when Ow ner . The old passwords are displayed. 3. Push the curso[...]

9. Service Mode Set up of an Access Contro l List. 1. Push the cursor key ↑ or ↓ to highlight Change Password. (menu 9-8) 2. Press ENTER to display the Change password menu. (menu 9-9) Note: Only possible when Ow ner . 3. Push the cursor key ↑ or ↓ to highlight Access Control List . 4. Press ENTER to display the Access Control List menu. (m[...]

9. Service Mode 9.5 Changing Language Start up 1. Push the cursor key ↑ or ↓ to highlight Change Langua ge . (menu 9-1 1 ) 2. Press ENTER to display the Chan ge Language menu. (menu 9-12) 3. Push the cursor key ↑ or ↓ to highlight the desired language. 4. Press ENTER to change the language. Available languages: English SERVICE IDENTIFICATIO[...]

9. Service Mode 4. Press ENTER to activate . The address digit will be highlighted. 5. Select 0 or 1 with the ↑ or ↓ keys Or , enter the new value with the numeric keys. SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS SERIAL COMMUNICATION NETWORK LAMP DIMMING MORE... Select with ↑ or ↓ then <ENTER> <EXIT[...]

9. Service Mode 9.7.2 Baud rate Setting Set up T o change the baud rate, handle as follow: 1. Push the cursor key ↑ or ↓ to highlight Baudrate . (menu 9-19) The actual baud rate will be displayed. 2. Press ENTER to toggle between the available baudrates. Default : 9600 SERIAL COMMUNICATION PROJECTOR ADDRESS 001 BAUDRATE [115200] INTERFACE STAND[...]

9. Service Mode 9.7.4 RS422 T ermination Set up The last projector in a line should be RS422 terminated (ON position). All others in the line should be in the OFF position. T o change the terminatio n position : 1. Push the cursor key ↑ or ↓ to highlight RS422 T ermination. (menu 9 -21) The actual settin g will be displayed. 2. Press ENTER to t[...]

9. Service Mode Entering the necessary addresse s. 1. Select the IP a ddress with the cursor keys. (menu 9-24) 2. Press ENTE R to edit. 3. Enter or reprogram the address with the numeric keys (conta ct your network responsible for the correct address). An address contains 4 octets with a maximum value of 255, separated by a bullet. 4. Repeat the ab[...]

9. Service Mode 100 Clo value Time [h] L i g h t o u t p u t [ % ] Image 9-5 CLO function of one projector Linked CLO, used by multiple projectors If the linked CLO function is in the OFF position, the lamp of each projector will follow its own life cycle curve (dotted lines). When in the ON position and linked as described below , all projectors w[...]

9. Service Mode Proj 1 Proj 2 Proj 3 Proj 4 in in in in out out out RS RS RS Terminator Image 9-7 Principal di agram : linking via RS p ort Linking via the Comm port The constant light output of the projectors can be set to the same v alue by linking the projectors via the Comm port and using one or more Comm 80 0 splitters (See Connections, Linke [...]

9. Service Mode How to display the l amp menu 1. Push the cursor key ↑ or ↓ to highlight Lamp . (menu 9-26) 2. Press ENTER to selec t. The lamp menu will be displayed. (menu 9-27) SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS SERIAL COMMUNICATION NETWORK LAMP DIMMING MORE... Select with ↑ or ↓ then <ENTER>[...]

9. Service Mode How to di m 1. Push the cursor key ↑ or ↓ to highlight Dimming . (menu 9-28) 2. Press ENTER to selec t. A dimming slider box appears on the screen. 3. Use the ↑ or ↓ keys to dim the lamp until the desired light output is reached. SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS SERIAL COMMUNICATION[...]

9. Service Mode 9.12 Add-Ins How to get add ins? The available add-ins can be activated by entering your personal access key when buying this function. Please contact your reseller . He will ask for the serial number of your pro jector . A vailable Add I ns CLO : When activated, the lam p option ‘Constant light output’ in the menu ‘Lamp’ be[...]

9. Service Mode Start Up 1. Push the cursor key ↑ or ↓ to highlight Preset Inpu t Balance . (menu 9-34) 2. Press ENTER to selec t. The following warning will be displayed : (menu 9-35) Preset input balance is reserved to qualified s ervice personnel. If you are not qualified, press EXIT to cancel the panel adjust- ments. SERVICE BARCO LOGO ADD [...]

9. Service Mode 9.15 Diagnosis 9.15.1 How to start up the Diagnosis? What can be seen? The diagnosis menu gives the possibility to select an overview of the I 2 C controlled IC’s and an overview of the working of the formatter . Start up 1. Push the cursor key ↑ or ↓ to highlight Diagnosis . (menu 9-38) 2. Press ENTER to selec t. The diagnosi[...]

9. Service Mode 9.15.3 Formatt er How to select t he overvi ew? 1. Push the cursor key ↑ or ↓ to highlight Forma tter . (menu 9-42) 2. Press ENTER to selec t. An overview of the working of the formatter will be displayed. (menu 9-43) DIAGNOSIS I2C FORMATTER SMPS LPS1 LPS2 LPS3 VOLTAGES FANSPEED Select with ↑ or ↓ then <ENTER> <EXIT[...]

9. Service Mode 9.15.6 V oltages How to select t he overvi ew? 1. Push the cursor key ↑ or ↓ to highlight Voltages . (menu 9-48) 2. Press ENTER to selec t. The voltage overview window will be displayed. (menu 9-49) DIAGNOSIS I2C FORMATTER SMPS LPS1 LPS2 LPS3 VOLTAGES FANSPEED Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu[...]

10. Prog rammable Function Keys 10. PROGRAMMABLE FUNCTION KEYS 10.1 Function Keys What can be done with these keys? The five function keys on top of an adapted remote control can be programmed as short cut keys (quick access) to almost any adjustment menu. How can a function key be programmed? A function key can only be programmed when in the adjus[...]

10. Pr ogrammable Function Keys 120 R5976562 BARCOSLM G10 PERFOR MER 20/10/2004[...]

A. Standard Sou rce set up Files A. ST ANDARD SOURCE SET UP FILES A.1 T able overview T able over view The following standard source files are pre-programmed in the projector . Name 1 Resolu- tion 2 Fvert Hz 3 FHor kHz 4 Fpix MHz 5 Ptot 6 Pact 7 Ltot 8 Lact 9 1600_48V 1600x600i 48,0 40 62,500 135,000 2160 1600 651 600 1600_60V 1600x1200 60,0 00 75,[...]

A. Standard Source set up Files Name 1 Resolu- tion 2 Fvert Hz 3 FHor kHz 4 Fpix MHz 5 Ptot 6 Pact 7 Ltot 8 Lact 9 MAC_3 512x384 60,147 24,4 80 15,667 640 512 407 384 MAC_4 560_384 60,147 24,480 17,2 34 704 560 407 384 MAC_5 512x342 60,158 22,2 59 16,670 704 512 370 342 MAC_6 832x624 74,546 49,7 22 57,280 1 152 832 667 624 MAC_7 1024x768 74,907 60,[...]

A. Standard Sou rce set up Files Name 1 Resolu- tion 2 Fvert Hz 3 FHor kHz 4 Fpix MHz 5 Ptot 6 Pact 7 Ltot 8 Lact 9 SVGA_72V 800x600 72,084 48,0 80 50,003 1040 800 667 600 VGA_72V 640x480 72,800 37,8 56 31,496 832 640 520 480 VGA_GR 640x480 59,941 31,4 69 25,175 800 640 525 480 VGA_TXT 720x400 70,087 31,4 69 28,322 900 720 449 400 VGA75ISO 640x480 [...]

A. Standard Source set up Files 124 R5976562 BARCOSLM G10 PERFOR MER 20/10/2004[...]

B. Cleaning the dust filter s B. CLEANING THE DUST FIL TERS W ARNING : As the p rojector has to be open ed, this proced ure has to be performed by qu alified service tech- nician. When should it be done? Depending on the environment, the dust filters should be cleaned at least when replacing the lamp. W hen the projector operates in dusty environme[...]

B. Cleaning the dust filt ers Image B-1 Removing stacking sockets Image B-2 Input box slide out 126 R5976562 BARCOSLM G10 PERFOR MER 20/10/2004[...]

B. Cleaning the dust filter s Image B-3 Front screw top cover removal Image B-4 Dust filter removal How to cle an 1. Clean the dust filter with a d ry cloth or blow out with compressed air . Reinsert the dust filte rs and put the cover back on its place by fo llowing the opposit e procedure. T ake care to click the lens light cover into its p ositi[...]

B. Cleaning the dust filt ers B.2 Dust filter on the back side Necessary t ools • Flat screwdriver • Philips screwdriver What should be done T o get access to the dust filters, the back cover must be removed. How to remove 1. Loosen the 3 screw on the back side. (image B-6) 2. T ake off the cover . 3. Turn out 2 times 4 screws to remove both du[...]

B. Cleaning the dust filter s Image B-7 Dust filter removal Image B-8 Dust filter removal How to cle an 1. Clean the dust filter with a d ry cloth or blow out with compressed air . Reinsert the dust filters and put the cover b ack on its place by follow ing the opposite p rocedure. B.3 Dust filter on the bottom side Necessary t ools No tools. How t[...]

B. Cleaning the dust filt ers Image B-9 Dust filter bo ttom side How to cle an 1. Clean the dust filter with a d ry cloth or blow out with compressed air . 2. Reinsert the dust filter . 130 R5976562 BARCOSLM G10 PERFOR MER 20/10/2004[...]

Revision Sheet To : Barco nv Even ts/Documenta tion Noordlaan 5, B-8520 Kuurne Phone: +32 56.36.8 9.70, Fax: +32 56.36.88.24 E-mail: antoon.dejaegher@barco.com, Web: www.barco.com From: Date: Please correct the following points in this documentation ( R5976562/03 ): page wrong correct R5976562 B ARCO SLM G10 P ERFORMER 20/10/2004[...]