Barco R9001070 инструкция обслуживания

OWNER'S MANUAL DATA 2100 R9001070 Art. No. :R5975696 Date: 140798 BARCO PROJECTION SYSTEMS OWNER'S MANUAL DATA 2100 R9001070 Art. No. :R5975696 Date: 140798 BARCO PROJECTION SYSTEMS Rev. : 04 Rev. : 04[...]

Due to constant research, the information in this manual is subject to change without notice. Produced by BARCO NV, July 1998 All rights reserved. Trademarks are the rights of their respective owners. Printed in Belgium Due to constant research, the information in this manual is subject to change without notice. Produced by BARCO NV, July 1998 All [...]

Table of contents 5975696 BARCODATA 2100 140798 1-1 Table of contents 5975696 BARCODATA 2100 140798 1-1 WARNINGS & SAFETY INSTRUCTIONS ................................................................................................. ............................................ 1 - 1 AVERTISSEMENTS & PRESCRIPTIONS DE SECURITE ...............[...]

Table of contents 1-2 5975696 BARCODATA 2100 140798 Table of contents 1-2 5975696 BARCODATA 2100 140798 INSTALLATION SET UP ............................................................................................................ .......................................................... 4 - 1 LOCATION AND FUNCTION OF CONTROLS ..................[...]

Table of contents 5975696 BARCODATA 2100 140798 1-3 Table of contents 5975696 BARCODATA 2100 140798 1-3 Picture Controls with D irect Access. ........................................................................................... ............................................... 8 - 4 Sound Controls with Direct Access. ...........................[...]

Table of contents 1-4 5975696 BARCODATA 2100 140798 Table of contents 1-4 5975696 BARCODATA 2100 140798 INSTALLATION ................................................................................................................... .............................................................. 11-1 Starting Up the Installation Mode ...............[...]

Table of contents 5975696 BARCODATA 2100 140798 1-5 Table of contents 5975696 BARCODATA 2100 140798 1-5 Appendix D : Lens Cleaning Procedure ............................................................................................................................... .............. D-1 Appendix E : Source numbers 90 - 99 ..........................[...]

Safety Instructions 5975696 BARCODATA 2100 140798 1-1 Safety Instructions 5975696 BARCODATA 2100 140798 1-1 WARNINGS AVERTISSEMENTS Safety Instructions Prescriptions de sécurité On Safety sécurité On Installation installation On Servicing entretien et réparation On Cleaning nettoyage On Repacking re-emballage On Illumination éclairage WARNING[...]

Presciptions de sécurité 1-2 5975696 BARCODATA 2100 140798 Presciptions de sécurité 1-2 5975696 BARCODATA 2100 140798 Remarque sur la Sécurité Les projecteurs sont fabriqués conformément aux exigences des normes de sécurité internationales EN60950, UL 1950 et CSA C22.2 No. 950. Ces normes de sécurité sont imposées aux équipements de l[...]

Safety Instructions 5975696 BARCODATA 2100 140798 1-3 Safety Instructions 5975696 BARCODATA 2100 140798 1-3 Notice on Safety Projectors are built in accordance with the requirements of the international safety standards EN60950, UL 1950 and CSA C22.2 No. 950, which are the safety standards of information technology equipment including electrical bu[...]

Presciptions de sécurité 1-4 5975696 BARCODATA 2100 140798 Presciptions de sécurité 1-4 5975696 BARCODATA 2100 140798 RISQUE D'ELECTRO- CUTION NE PAS OUVRIR ATTENTION ATTENTION : AFIN DE REDUIRE LE RISQUE DE CHOCS ELECTRIQUES, NE PAS ENLEVER LE COUVERCLE (OU LE DOS) IL N'Y A PAS DE PIECES REPARABLES PAR L'UTILISATEUR A L'INT[...]

Safety Instructions 5975696 BARCODATA 2100 140798 1-5 Safety Instructions 5975696 BARCODATA 2100 140798 1-5 The lightning flash with an arrowhead within a triangle is intended to tell the user that parts inside this product are risk of electrical shock to persons. The exclamation point within a triangle is in- tended to tell the user that important[...]

Presciptions de sécurité 1-6 5975696 BARCODATA 2100 140798 Presciptions de sécurité 1-6 5975696 BARCODATA 2100 140798 Instructions pour lutilisateur : Si cet équipement cause des interférences de radio ou de télévision, lutilisateur peut essayer de corriger les interférences en appliquant une ou plusieurs de les mesures suivantes : -[...]

Safety Instructions 5975696 BARCODATA 2100 140798 1-7 Safety Instructions 5975696 BARCODATA 2100 140798 1-7 Instructions to the user : if this equipment does cause interference to radio or television reception, the user may try to correct the interference by one or more of the following measures : - Re-orientation of the receiving antenna for the r[...]

Presciptions de sécurité 1-8 5975696 BARCODATA 2100 140798 Presciptions de sécurité 1-8 5975696 BARCODATA 2100 140798 * Pour débrancher le cordon, le tirer par le connecteur, jamais par le cordon lui-même. * Si on utilise une rallonge, vérifier que le total des courants des appareils raccordés à cette rallonge ne dépasse pas la capacité [...]

Safety Instructions 5975696 BARCODATA 2100 140798 1-9 Safety Instructions 5975696 BARCODATA 2100 140798 1-9 * Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord. * To disconnect the cord, pull it out by the plug. Never pull the cord itself. * If an extension cord is used with this product[...]

Presciptions de sécurité 1-10 5975696 BARCODATA 2100 140798 Presciptions de sécurité 1-10 5975696 BARCODATA 2100 140798 Contacter le service technique qualifié dans les cas suivants : - Si le cordon secteur ou la prise de courant est endommagé ou effiloché. - Si on a répandu du liquide dans le projecteur. - Si lappareil a été exposé ?[...]

Safety Instructions 5975696 BARCODATA 2100 140798 1-11 Safety Instructions 5975696 BARCODATA 2100 140798 1-11 risk of electric shock! Refer all projector service to a qualified BARCO service center. Call for service in the following conditions : - When the power cord or plug is damaged or frayed. - If liquid has been spilled into the projector. - I[...]

Presciptions de sécurité 1-12 5975696 BARCODATA 2100 140798 Presciptions de sécurité 1-12 5975696 BARCODATA 2100 140798 Eclairage Pour garantir la meilleure qualité possible de limage projetée, il est essentiel que léclairage ambiant incident sur lécran soit réduit au strict minimum. Lors de linstallation du projecteur et de l?[...]

Safety Instructions 5975696 BARCODATA 2100 140798 1-13 Safety Instructions 5975696 BARCODATA 2100 140798 1-13 in handy if you ever have to ship your projector. For maximum protection, repack your set as it was originally packed at the factory. On Illumination In order to obtain the best quality for the projected image, it is essential that the ambi[...]

Unpacking & Dimensions 5975696 BARCODATA 2100 140798 Unpacking & Dimensions 5975696 BARCODATA 2100 140798 2-1 2-1 UNPACKING DIMENSIONS BATTERY INSTALLATION ON THE RCU UNPACKING DIMENSIONS BATTERY INSTALLATION ON THE RCU[...]

Unpacking & Dimensions 2-2 5975696 BARCODATA 2100 140798 Unpacking & Dimensions 2-2 5975696 BARCODATA 2100 140798 Unpacking To open the banding, pull on the clip as shown in the first drawing. Take the projector out of its shipping carton and place it on a table. For transportation, the projector is mounted on a wooden board with 3 bolts (M[...]

Unpacking & Dimensions 5975696 BARCODATA 2100 140798 Unpacking & Dimensions 5975696 BARCODATA 2100 140798 2-3 2-3 Projector Dimensions (units : mm) 641.5 405 20 0.5 63 33 5 22 4 14 1 55 35 141.2 20 250 22 0 278 127 5 194.9 603 2 25 245 67.5 Projector Dimensions (units : mm) 641.5 405 20 0.5 63 335 224 141 55 35 141.2 20 250 220 278 127 5 19[...]

Unpacking & Dimensions 2-4 5975696 BARCODATA 2100 140798 Unpacking & Dimensions 2-4 5975696 BARCODATA 2100 140798 310a. DRW Battery Installation in the RCU. A battery (not yet installed to save the battery life time) is delivered inside the plastic bag with the power cord. Before using the RCU, start first the battery installation procedure[...]

Installation Guidelines 5975696 BARCODATA 2100 140798 3-1 Installation Guidelines 3-1 5975696 BARCODATA 2100 140798 INSTALLATION GUIDELINES Environment What about Ambient Light? Which Screen Type? What Image Size? How Big should the Image be? Where to Install the Projector? How to Install the Projector? INSTALLATION GUIDELINES Environment What abou[...]

Installation Guidelines 3-2 5975696 BARCODATA 2100 140798 Installation Guidelines 5975696 BARCODATA 2100 140798 3-2 Installation Guidelines Careful consideration of things as image size, ambient light level, projector placement and type of screen to use are critical to the optimum use of the projection system. * Environment Do not install the proje[...]

Installation Guidelines 5975696 BARCODATA 2100 140798 3-3 Installation Guidelines 3-3 5975696 BARCODATA 2100 140798 * Which Screen Type? There are two major categories of screens used for projection equipment. Those used for front projected images and those for rear projection applications. Screens are rated by how much light they reflect (or trans[...]

Installation Guidelines 3-4 5975696 BARCODATA 2100 140798 Installation Guidelines 5975696 BARCODATA 2100 140798 3-4 * Where to Install the Projector? Definitions of the Abbreviation on drawings B = Distance between ceiling and top of the screen or between floor and bottom of the screen. A = Correction value, distance between bottom side of projecto[...]

Installation Guidelines 5975696 BARCODATA 2100 140798 3-5 Installation Guidelines 3-5 5975696 BARCODATA 2100 140798 Table mounting of the BARCODATA 2100 (70% off-axis projection) Ceiling mounting of the BARCODATA 2100 (70% off-axis projection) Screen PD B Ce i ling Pr oj ec to r CD A CD = B + (S W x 0. 225) - A SH Opti c al axi s pr oj e ct i on le[...]

Installation Guidelines 3-6 5975696 BARCODATA 2100 140798 Installation Guidelines 5975696 BARCODATA 2100 140798 3-6 ice technician. * How to Install a Projection Lens? The BARCODATA 2100 is supplied without any lens. The following lens is available : SD(1.2:1) - Video SD(1.2:1) SD(1.7:1) How to install the lens on the BARCODATA 2100? Remove the foa[...]

Installation Guidelines 5975696 BARCODATA 2100 140798 3-7 Installation Guidelines 3-7 5975696 BARCODATA 2100 140798 Always use the BARCO ceiling support to attach your BARCODATA 2100 to the ceiling. The installation instruction for this support is enclosed in the packet of the set. Note : A ceiling mount adapter plate is needed to mount the project[...]

Installation Set Up Installation Set Up 5975696 BARCODATA 2100 140798 4-1 4-1 5975696 BARCODATA 2100 140798 INSTALLATION SET UP Projector Configuration INSTALLATION SET UP Projector Configuration[...]

Installation Set Up 4-2 Installation Set Up 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 4-2 The BARCODATA 2100 can be installed to project images in four different configurations : front/table, front/ceiling, rear/table and rear/ceiling. 5 H D U 7 D E OH 5 HDU & HL O LQJ )U RQW  7DEO H )URQW &HLO LQJ The BARCODAT[...]

Installation Set Up Installation Set Up 5975696 BARCODATA 2100 140798 4-3 4-3 5975696 BARCODATA 2100 140798 To change the Configuration, enter the adjustment mode by pushing ADJUST or ENTER . Highlight Installation by pushing the control disk up or down and press ENTER to select. The installation menu will be displayed. ENTER displays the Installat[...]

Location and Functions of Control 5975696 BARCODATA 2100 140798 5-1 Location and Functions of Control 5975696 BARCODATA 2100 140798 5-1 LOCATION AND FUNCTION OF CONTROLS Front Panel Terminology Local Keypad Remote Control LOCATION AND FUNCTION OF CONTROLS Front Panel Terminology Local Keypad Remote Control[...]

Location and Functions of Control 5-2 Location and Functions of Control 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 5-2 Front Panel Terminology 0 I SO UR CE 1 SO UR CE 4 SO UR CE 5 SO UR CE 2 SO UR CE 3 AUDIO OUT AU DIO IN C AUDIO IN B AU DI O IN A VID EO VI DEO S VID EO RGB H/ CV RGBH/CV L - R L - R L - R L - R IR RR G G BB H/C H/ [...]

Location and Functions of Control 5975696 BARCODATA 2100 140798 5-3 Location and Functions of Control 5975696 BARCODATA 2100 140798 5-3 Power switch : '1 ' = o n, '0 ' = o ff Power input : switchable between 120 VAC and 230 VAC IR receiver : receiver for control signals transmitted from the RCU. Diagnostics code : a) source numb[...]

Location and Functions of Control 5-4 Location and Functions of Control 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 5-4 Control Panel Terminology a. Local Keypad Getting access The keypad is located behind a door, screened with the name of the projector. To open the door, push once on the indicated side of the door and turn it to th[...]

Location and Functions of Control 5975696 BARCODATA 2100 140798 5-5 Location and Functions of Control 5975696 BARCODATA 2100 140798 5-5 Remote Control (RCU) Local keypad COLO R PHASE SHARPN TINT BRIGH TN ST AN DB Y ENTER TEXT EX IT PAUSE CO NTRAST - + - + - + - + - + 0 9 7 8 6 5 4 3 2 1 - + - + - + - + - + Remote Control (RCU) Local keypad COLO R P[...]

Location and Functions of Control 5-6 Location and Functions of Control 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 5-6 Terminology Back light key : when activated, all keys will lit up and visible in the dark. ADJ. : ADJUST key, to enter the adjustment mode or for quick exit in the adjustment mode. A ddress key (sunk key), to enter[...]

Power Connection Power Connection 5975696 BARCODATA 2100 140798 6-1 6-1 5975696 BARCODATA 2100 140798 POWER CONNECTION POWER CONNECTION[...]

Power Connection 6-2 Power Connection 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 6-2 0I SOURCE 1 SOURCE 4 SOURCE 5 SOURCE 2 SOURCE 3 AUDI O OUT AUDIO IN C AUDIO IN B AUDIO IN A VIDEO VIDEO S VID EO RGBH/CV RGBH/CV L - R L - R L - R L - R IR R R GG BB H/C H/C VV RS 23 2 I N RS 232 OU T CO MM PORT CTRL hardw ired remote Read ins truc[...]

Power Connection Power Connection 5975696 BARCODATA 2100 140798 6-3 6-3 5975696 BARCODATA 2100 140798 - + - + - + - + - + 0 9 7 8 6 5 4 3 2 1 - + - + - + - + - + When switching on with the power switch, the projector starts in the stand by mode. The projector mode indication lamp is red. To start image projection, press the 'Stand by' but[...]

Power Connection 6-4 Power Connection 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 6-4 Lamp Lifetime 30 hours before end of lamp lifetime, the following message will scroll over the screen for 1 minute. This message will be repeated every 30 minutes. Press EXIT to remove the message before the minute is over. When the end of the lamp[...]

Connections Connections 5975696 BARCODATA 2100 140798 7-1 7-1 5975696 BARCODATA 2100 140798 INPUT CONNECTIONS Connecting a Video Source to the Video Input Connecting a S- Video Source to the S- Video Input Connecting a RGB Analog Source to the RGB Analog Input Connecting a Component Video Source to the RGB Inputs. Peripheral Equipment Connection Co[...]

Connections Connections 7-2 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 7-2 Signal Input Connection to the Projector. The following sources can be connected to the projector : - Composite Video - S-Video - RGBS or RGsB - RGBHV - RGB3S or RG3sB - Component Video Source input Input type Digit button on Audio input R C U (lock is off) [...]

Connections Connections 5975696 BARCODATA 2100 140798 7-3 7-3 5975696 BARCODATA 2100 140798 Connecting a Video Source to the BNC Input (source 1) Coposite video signals from a VCR, OFF air signal decoder, etc. ... 1 x BNC 1.0Vpp ± 3 dB Connect the audio input signals to the AUDIO A input when the audio lock is OFF (see also chapter "Controlli[...]

Connections Connections 7-4 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 7-4 Connecting a Video source to the Cinch (RCA) input (source 2) Coposite video signals from a VCR, OFF air signal decoder, etc. ... 1 x Cinch (RCA) 1.0Vpp ± 3 dB Connect the audio input signals to the AUDIO A input when the audio lock is OFF (see also chapter[...]

Connections Connections 5975696 BARCODATA 2100 140798 7-5 7-5 5975696 BARCODATA 2100 140798 Connecting a S-Video Source to the 4-pin mini DIN Input (source 3) Separate Y-luma/C-chroma signals for higher quality playback of Super VHS signals.. 1 x 4 pins plug pin configuration : 1 ground luminance 2 ground chrominance 3 luminance 1.0 Vpp ± 3 dB 4 c[...]

Connections Connections 7-6 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 7-6 Connecting a RGB Analog Source to Source 4 or 5 RGB analog input terminals with automatic sync detection. Sync can be separate Horizontal and Vertical sync (RGB-HV), Composite sync (RGB-S) or Sync signals on green(RGsB). Always use an interface when a comput[...]

Connections Connections 5975696 BARCODATA 2100 140798 7-7 7-7 5975696 BARCODATA 2100 140798 All input signals can be 75 ohm terminated via soft switches (see also Service mode). Connect the possible audio input signals for source 4 to the AUDIO B input when the audio lock is OFF and for source 5 to the AUDIO C input when the audio lock is OFF (see [...]

Connections Connections 7-8 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 7-8 Connecting a RGB3S Analog Source to Source 4 or 5. Connect your RGB signals with Tri-level sync, e.g. a professional VCR to the RGB input terminals of source 4 or source 5. RGB3S/RG3sB analog : 5 x BNC Red : 0.7 Vpp ± 3 dB Blue : 0.7 Vpp ± 3 dB Green : 0.7[...]

Connections Connections 5975696 BARCODATA 2100 140798 7-9 7-9 5975696 BARCODATA 2100 140798 Connecting a Computer, e.g. IBM PC (or compatible), Apple Macintosh to the RS 232 Input of the Projector. The BARCODATA 2100 projector has a RS232 port that allows it to communicate with a computer. Applications : remote control and data communications. a) r[...]

Connections Connections 7-10 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 7-10 Connecting a RCVDS 800 or RCVDS 05 to the BARCODATA 2100. - Up to 10 inputs with one RCVDS800 or 20 inputs with the RCVDS 05 and 90 inputs when RCVDS's are linked via the expansion module. - Serial communication with the projector. - Remote control bu[...]

Controlling Controlling 5975696 BARCODATA 2100 140798 8-1 8-1 5975696 BARCODATA 2100 140798 CONTROLLING How to Use the RCU Projector Address How to Display a Projector Address How to Program an Address into the RCU Picture Controls with Direct Access Sound Controls with Direct Access The Pause Key The Mute Key CONTROLLING How to Use the RCU Project[...]

Controlling 8-2 Controlling 8-2 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 The BARCODATA 2100 can be controlled with a. the RCU b. the hardwired RCU (cable is not included) c. the local keypad. Controlling the projector with the RCU and the hardwired RCU is equal. How to Use the RCU? a) Point the front of the RCU to the reflective [...]

Controlling Controlling 5975696 BARCODATA 2100 140798 8-3 8-3 5975696 BARCODATA 2100 140798 c) Point the front of the RCU directly at one of the IR sensors of the projector. When using the wireless remote control, make sure you are within the effective operating distance (30m (100ft) in a straight line). The remote control unit will not function pr[...]

Controlling 8-4 Controlling 8-4 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 How to Display a Projector Address? Press the ADDRESS key (recessed key on the RCU) with a pencil. The projector's address will be displayed in a 'Text box'. This text box disappears after a few seconds. To continue using the RCU, it is necess[...]

Controlling Controlling 5975696 BARCODATA 2100 140798 8-5 8-5 5975696 BARCODATA 2100 140798 Contrast Control A correct 'contrast' setting is important for good image reproduction. Adjust the contrast to the level you prefer, according to room lighting conditions. Use the + button for a higher contrast. Use the - button for lower contrast.[...]

Controlling 8-6 Controlling 8-6 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 Volume Control Volume control adjusts the volume. Use the + button for a higher volume. Use the - button for a lower volume. Bass Control Bass control adjusts the bass level (low tones). Use the + button for more low tones. Use the - button for less low tone[...]

Start Up of the Adjustment Mode 9-1 Start Up of the Adjustment Mode 9-1 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 START UP OF THE ADJUSTMENT MODE START UP OF THE ADJUSTMENT MODE[...]

Start Up of the Adjustment Mode 9-2 Start Up of the Adjustment Mode 9-2 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 Adjustment Mode All source set ups, picture tunings and geometry are made while in the 'Adjustment mode' . Press the ADJUST or ENTER key to enter the 'Adjustment mode'. You are now in the 'Adju[...]

Start Up of the Adjustment Mode 9-3 Start Up of the Adjustment Mode 9-3 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 Some items in the Adjustment mode are password protected. While selecting such an item, the projector asks to enter your password (Password protection is only available when the password strap on the controller module [...]

Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-1 Random Access Adjustment Mode 10-1 5975696 BARCODATA 2100 140798 RANDOM ACCESS ADJUSTMENT MODE File Service Picture Tuning Audio Tuning Geometry RANDOM ACCESS ADJUSTMENT MODE File Service Picture Tuning Audio Tuning Geometry[...]

Random Access Adjustment Mode Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-2 10-2 5975696 BARCODATA 2100 140798 Starting Up the Random Access Adjustment Mode Push the control disk up or down to highlight 'Random Access' and then press ENTER . ADJUSTMENT MODE Select a path from below : RANDOM ACCESS INSTALLATION SERVICE S[...]

Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-3 Random Access Adjustment Mode 10-3 5975696 BARCODATA 2100 140798 File Service Before using a new source, a correct file has to be installed. The projector's memory contains a list of files corresponding to the most used sources. When the new source corresponds with one of these f[...]

Random Access Adjustment Mode Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-4 10-4 5975696 BARCODATA 2100 140798 Load File Push the control disk up or down to select LOAD and press ENTER to display the Load menu. The Load menu displays the corresponding files depending on the installed filter. This filter can be "Fit" or [...]

Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-5 Random Access Adjustment Mode 10-5 5975696 BARCODATA 2100 140798 Edit File The Edit file menu makes it possible to change the settings of the file according to the real settings of the connected source. Consult the source specification before entering the data. To start up the EDIT me[...]

Random Access Adjustment Mode Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-6 10-6 5975696 BARCODATA 2100 140798 a file with LOAD) Active vertical lines Vertical shift in lines Interlaced : toggle on/off (is automatically set to its correct position during the installation of a file with LOAD) All settings can individually be chang[...]

Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-7 Random Access Adjustment Mode 10-7 5975696 BARCODATA 2100 140798 How to find the correct values for the displayed item? During the installation of a file with LOAD, the horizontal period, the total number of vertical lines and the interlaced mode are automatically measured and filled [...]

Random Access Adjustment Mode Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-8 10-8 5975696 BARCODATA 2100 140798 Select "Vertical" by pushing the control disk key up or down and press ENTER . The full image is displayed. The "Vertical Total lines" are already filled when an active file is selected to be edited. [...]

Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-9 Random Access Adjustment Mode 10-9 5975696 BARCODATA 2100 140798 Options Source number : The source number of a non-active source can be changed to any other source number. This makes it possible to create already a file for future source numbers. Clamp pulse width : The width of the [...]

Random Access Adjustment Mode Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-10 10-10 5975696 BARCODATA 2100 140798 Rename To change the name of a selected file. Use the control disk to select RENAME and press ENTER . The Rename selection menu will be displayed. FILE SERVICE LOAD EDIT RENAME COPY DELETE OPTIONS RENAME FILE Filename [...]

Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-11 Random Access Adjustment Mode 10-11 5975696 BARCODATA 2100 140798 Copy To copy a selected file into a new file. Use the control disk to select COPY and press ENTER . The Copy selection menu will be displayed. Use the control disk to select a file name and press ENTER to select. The C[...]

Random Access Adjustment Mode Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-12 10-12 5975696 BARCODATA 2100 140798 Delete To delete a selected file out of the list of files. Use the control disk to select DELETE and press ENTER . The delete selection menu will be displayed. DELETE FILE Fi len am e Src Resolution -------------------[...]

Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-13 Random Access Adjustment Mode 10-13 5975696 BARCODATA 2100 140798 File Options Use the control disk to select OPTIONS and press ENTER . The option selection menu will be displayed. FILE SERVICE LOAD EDIT RENAME COPY DELETE OPTIONS Press ENTER to toggle between [name] and [index] [nam[...]

Random Access Adjustment Mode Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-14 10-14 5975696 BARCODATA 2100 140798 Sync SLOW/FAST Only active for sources 1, 2 and 3. When not source 1, 2 or 3, the following indication will be given on the menu : Sync (-). Highlight Sync by pushing the control disk up or down and press ENTER to togg[...]

Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-15 Random Access Adjustment Mode 10-15 5975696 BARCODATA 2100 140798 Color Balance Highlight Color Balance by pushing the control disk up or down and press ENTER to select the color balance selection menu. The next choices are possible : Fixed color balance : - 3200 K (reddish) - 6500 K[...]

Random Access Adjustment Mode Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-16 10-16 5975696 BARCODATA 2100 140798 Gamma With the gamma correction adjustment, it is possible to bring the details in dark image parts more to the front (lower gamma values) or to reduce the importance of these details (higher gamma values). To change t[...]

Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-17 Random Access Adjustment Mode 10-17 5975696 BARCODATA 2100 140798 Audio Tuning Highlight Audio Tuning by pushing the control disk up or down and press ENTER to select. The Audio Tuning menu will be displayed. The next items are available : - volume - balance - bass - treble - mute - [...]

Random Access Adjustment Mode Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-18 10-18 5975696 BARCODATA 2100 140798 ling'. Mute Select 'Mute' to stop the sound reproduction. The image is still displayed. Highlight 'Mute' with the control disk and press ENTER to toggle Select with é o r ê then <ENTER>[...]

Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-19 Random Access Adjustment Mode 10-19 5975696 BARCODATA 2100 140798 Fade Select Fade by pushing the control disk up or down. The fade can be adjusted between -15 and 15. Fade on -15 : no sound reproduction on the external loudspeakers, max on the internal loudspreaker with the same vol[...]

Random Access Adjustment Mode Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-20 10-20 5975696 BARCODATA 2100 140798 Geometry Highlight Geometry by pushing the control disk up or down and press ENTER to select the geometry selection menu. The following adjustment are possible : - horizontal and vertical image shift. - horizontal and [...]

Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-21 Random Access Adjustment Mode 10-21 5975696 BARCODATA 2100 140798 Size Highlight Size by pushing the control disk up or down and press Select with é o r ê then <ENTER> <EXIT> to return. GEOMETRY SHIFT SIZE ZOOM BLANKING SCALE ENTER to select. The size can be adjusted in[...]

Random Access Adjustment Mode Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-22 10-22 5975696 BARCODATA 2100 140798 Zoom Highlight Zoom by pushing the control disk up or down and press ENTER to select. Push the control disk to the right or forward to zoom in (more detail). Push the control disk to the left or backward to zoom out (l[...]

Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-23 Random Access Adjustment Mode 10-23 5975696 BARCODATA 2100 140798 Blanking Highlight Blanking by pushing the control disk up or down and press ENTER to select. Blanking adjustments affect only the edges of the projected image and are used to frame the projected image on to the screen[...]

Random Access Adjustment Mode Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-24 10-24 5975696 BARCODATA 2100 140798 BLANKING BLANKING [ON] TOP BOTTOM LEFT RIGHT RESET Select with é o r ê then <ENTER> <EXIT> to return. Adjustment of the blanking on the top of the image Adjustment of the blanking on the bottom of the ima[...]

Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-25 Random Access Adjustment Mode 10-25 5975696 BARCODATA 2100 140798 Scale [1:1] When 'Scale 1:1' is selected, the real input signal without image conversion is displayed on the screen witha resolution of 800 x 600 pixels. Parts of the image cannot be displayed and will be los[...]

Random Access Adjustment Mode Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-26 10-26 5975696 BARCODATA 2100 140798[...]

Installation 11-1 Installation 5975696 BARCODATA 2100 140798 11-1 5975696 BARCODATA 2100 140798 INSTALLATION Configuration Internal Patterns INSTALLATION Configuration Internal Patterns[...]

Installation 11-2 Installation 11-2 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 Starting Up the Installation Mode Push the control disk up or down to highlight Installation and then press ENTER . ADJUSTMENT MODE Select a path from below : RANDOM ACCESS INSTALLATION SERVICE Source 01 INSTALLATION CONFIGURATION INTERNAL PATTERNS Selec[...]

Installation 11-3 Installation 5975696 BARCODATA 2100 140798 11-3 5975696 BARCODATA 2100 140798 Configuration Highlight "Configuration" by pushing the control disk up or down and press ENTER to select. For more information, see Projector configuration in chapter Instal- lation Set Up. Select with é o r ê then <ENTER> <EXIT> [...]

Installation 11-4 Installation 11-4 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798[...]

Service Mode 5975696 BARCODATA 2100 140798 12-1 Service Mode 5975696 BARCODATA 2100 140798 12-1 SERVICE MODE Identification Change Password Change Projector Address Change Baudrate PC Reset Lamp Run Time Lamp Run Time History Preset Input Balance Change Language I²C Diagnosis 75 W Termination Dimming SERVICE MODE Identification Change Password Cha[...]

Service Mode 12-2 5975696 BARCODATA 2100 140798 Service Mode 12-2 5975696 BARCODATA 2100 140798 Starting Up the Service Mode Push the control disk up or down to highlight Service and then press ENTER . Some items in the Service mode are password protected (when the password function is active). Enter your password to continue. All other password pr[...]

Service Mode 5975696 BARCODATA 2100 140798 12-3 Service Mode 5975696 BARCODATA 2100 140798 12-3 SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE PROJ. ADDRESS CHANGE BAUDRATE PC RESET LAMP RUNTIME LAMP RUNTIME HISTORY PRESET INPUT BALANCE MORE ... SERVICE CHANGE LANGUAGE 75 Ω TERMINATION DIMMING I2C DIAGNOSIS MORE ... BARCO DATA 2100 Proj. address :[...]

Service Mode 12-4 5975696 BARCODATA 2100 140798 Service Mode 12-4 5975696 BARCODATA 2100 140798 Select with ê o r é then <ENTER> <EXIT> to return. SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE PROJ. ADDRESS CHANGE BAUDRATE PC RESET LAMP RUNTIME LAMP RUNTIME HISTORY PRESET INPUT BALANCE MORE ... SERVICE CHANGE LANGUAGE 75 W TERMINATION[...]

Service Mode 5975696 BARCODATA 2100 140798 12-5 Service Mode 5975696 BARCODATA 2100 140798 12-5 Identification To display the Identification sreen, push the control disk up or down to highlight Identification and press ENTER to display the Identification screen. The Identification screen gives an overview of : - type of projector - projector addres[...]

Service Mode 12-6 5975696 BARCODATA 2100 140798 Service Mode 12-6 5975696 BARCODATA 2100 140798 - Baud rate : transfer speed for communication with a IBM PC (or compatible) or MAC. The baud rate of the projector must be the same as the baud rate of the connected computer. When there is a difference, consult Set up of the baud rate for commu- nicati[...]

Service Mode 5975696 BARCODATA 2100 140798 12-7 Service Mode 5975696 BARCODATA 2100 140798 12-7 How to Change the Password ? Highlight Change password by pushing the control disk up or down and press ENTER to display the Change Password menu. ENTER displays the Change Password menu EXIT returns to the adjustment selection menu. The old password is [...]

Service Mode 12-8 5975696 BARCODATA 2100 140798 Service Mode 12-8 5975696 BARCODATA 2100 140798 Change Projector Address Every projector requires an individual address between 0 and 255. This address can be software installed. To change that address, push the control disk up or down to highlight Change Proj. Address and press ENTER . The Change Pro[...]

Service Mode 5975696 BARCODATA 2100 140798 12-9 Service Mode 5975696 BARCODATA 2100 140798 12-9 The next baud rates are available : - 9600 - 4800 - 2400 - 1200 - 600 - 300 - 150 - 75 The actual baud rate will be highlighted. To change the baud rate, push the control disk up or down and press ENTER to accept the new baud rate setting. Reset Lamp Run[...]

Service Mode 12-10 5975696 BARCODATA 2100 140798 Service Mode 12-10 5975696 BARCODATA 2100 140798 Lamp Run Time History To get an overview of the different lamp run times, highlight Lamp Run Time History by pushing the control disk up or down and press ENTER . ENTER displays the Lamp Run Time History menu. EXIT returns to the adjustment selection m[...]

Service Mode 5975696 BARCODATA 2100 140798 12-11 Service Mode 5975696 BARCODATA 2100 140798 12-11 Preset Input Balance Highlight the Black Balance by pushing the control disk up or down and press ENTER to select. With the Black Balance adjustment, the black level of the red and blue channels can be adjusted in comparison with the green channel. Use[...]

Service Mode 12-12 5975696 BARCODATA 2100 140798 Service Mode 12-12 5975696 BARCODATA 2100 140798 Change Language Highlight Language by pushing the control disk up or down and press ENTER to select the Language Selection menu. For the moment, only English is available. SERVICE CHANGE LANGUAGE 75 Ω TERMINATION DIMMING I2C DIAGNOSIS MORE ... CHANGE[...]

Service Mode 5975696 BARCODATA 2100 140798 12-13 Service Mode 5975696 BARCODATA 2100 140798 12-13 S e l e ct w it h o r then <ENTER> <EXIT> to return. SERVICE CHANGE LANGUAGE 75 Ω TERMINATION DIMMING I2C DIAGNOSIS MORE ... DIMMING 0 100 50 Dimming (for lamps with order numbers R9829510 and R9829740) Highlights 'Dimming' by p[...]

Service Mode 12-14 5975696 BARCODATA 2100 140798 Service Mode 12-14 5975696 BARCODATA 2100 140798 SERVICE CHANGE LANGUAGE 75 Ω TERMINATION DIMMING I2C DIAGNOSIS MORE ... I2C DIAGNOSIS DCA INPUT ANALOG TDA8444 42H # # # INPUT ANALOG PC F8574A 74H # # # INPUT ANALOG PC F8574A 78H # # # INPUT ANALOG TDA8444 4EH # # # DECODER 40H # # # LA MP DR IVE R[...]

Optional Equipment 5975696 BARCODATA 2100 140798 13-1 Optional Equipment 5975696 BARCODATA 2100 140798 13-1 OPTIONAL EQUIPMENT IR Remote Receiver Hardwired RCU RCVDS800/RCVDS05 VS05 Interfaces Adapter and Communication Cables Ceiling Mount Kit CM50 OPTIONAL EQUIPMENT IR Remote Receiver Hardwired RCU RCVDS800/RCVDS05 VS05 Interfaces Adapter and Comm[...]

Optional Equipment 13-2 5975696 BARCODATA 2100 140798 Optional Equipment 13-2 5975696 BARCODATA 2100 140798 IR Receiver 800 This infra red receiver unit makes it possible to control the BARCODATA 2100 from another room. There is a communication line with cable between the IR receiver and the projector or the RCVDS. The control information from the [...]

Optional Equipment 5975696 BARCODATA 2100 140798 13-3 Optional Equipment 5975696 BARCODATA 2100 140798 13-3 RCVDS 800 / RCVDS 05 An optional RCVDS 800 source selector makes it possible to connect up to ten sources to the projector, an optional RCVDS 05 source selector makes it possible to connect up to 20 sources to the projector. When RCVDS's[...]

Optional Equipment 13-4 5975696 BARCODATA 2100 140798 Optional Equipment 13-4 5975696 BARCODATA 2100 140798 Interface Universal Analog Interface Order number : R9826100 RGB 120 MHz Analog Interface Order number : R9826570 VGA interface Order number : R9828070 (230V) R9828079 (120V) MAC interface Order number : R9828050 (230V) R9828059 (120V) Multif[...]

Appendix A : Standard Source Set Up Files 5975696 BARCODATA 2100 140798 A-1 Appendix A : Standard Source Set Up Files 5975696 BARCODATA 2100 140798 A-1 NAME RESOLUTION FVERT FHOR FPIX PTOT PACT LTOT LACT Hz kHz MH z CGA 640 X 200 59,924 15,700 14,318 912 640 262 200 NTSC 675 X 240I 29,970 15,734 13,500 858 720 263 240 PAL 675 X 278I 25,000 15,625 1[...]

Appendix A : Standard Source Set Up Files A-2 5975696 BARCODATA 2100 140798 Appendix A : Standard Source Set Up Files A-2 5975696 BARCODATA 2100 140798 NAME RESOLUTION FVERT FHOR FPIX PTOT PACT LTOT LACT Hz kHz MH z VGA75ISO 640 X 480 75,000 39,375 31,500 800 640 525 480 MAC_2 640 X 480 66,667 35,000 30,240 864 640 525 480 MA C_L C 640 X 480 66,619[...]

Appendix A : Standard Source Set Up Files 5975696 BARCODATA 2100 140798 A-3 Appendix A : Standard Source Set Up Files 5975696 BARCODATA 2100 140798 A-3 NAME RESOLUTION FVERT FHOR FPIX PTOT PACT LTOT LACT Hz kHz MH z SG_60_3 960 X 680 60,000 43,200 54,432 1260 960 720 68 0 NAME RESOLUTION FVERT FHOR FPIX PTOT PACT LTOT LACT Hz kHz MH z SG_60_3 960 X[...]

Appendix B : Battery Replacement in the RCU 5975696 BARCODATA 2100 140798 B-1 Appendix B : Battery Replacement in the RCU 5975696 BARCODATA 2100 140798 1-1 Battery Replacement in the RCU. Remove the battery cover on he backside of the remote control by pushing the indicated handle a little to the bottom of the RCU. Lift up the top side of the cover[...]

Appendix C : Focusing the Lens 5975696 BARCODATA 2100 140798 C-1 Appendix C : Focusing the Lens 5975696 BARCODATA 2100 140798 C-1 Focusing the Lens Loosen the fastener ring of the lens by turning counter clock- wise. Focus the image by turning the lens barrel to the left or the right. Attention : Do not turn out the lens too far, otherwise it will [...]

Appendix D : Lens Cleaning Procedure 5975696 BARCODATA 2100 140798 D-1 Appendix D : Lens Cleaning Procedure 5975696 BARCODATA 2100 140798 D-1 Lens Cleaning Procedure Cleaning procedure for the SD lens To minimize the possibility of damaging the optical coating or scratch- ing exposed lens surfaces, we have developed recommendations for cleaning len[...]

Appendix E : Source Number 90 - 99 5975696 BARCODATA 2100 140798 E-1 Appendix E : Source Number 90 - 99 5975696 BARCODATA 2100 140798 E-1 Source Numbers 90 - 99 These source numbers do not correspond to physical inputs. They can only be used when the projector is equipped with a RCVDS 800 or RCVDS 05 or VS05. An additional adjustment file can be cr[...]

Appendix F : Lenses 5975696 BARCODATA 2100 140798 A-1 Appendix F : Lenses 5975696 BARCODATA 2100 140798 A-1 Lenses This APPENDIX gives an overview of the table and formula for the available lenses for the BARCODATA 2100. An overview of all tables, diagrams and formulas can also be found in the manual "Installation diagrams for BARCO projectors[...]

Appendix F : Lenses A-2 5975696 BARCODATA 2100 140798 Appendix F : Lenses A-2 5975696 BARCODATA 2100 140798 Lens formulas to calculate the projector distance. SD(1. 15:1) Metric PD= 1.079 x SW + 0.2929 Inch PD= 1.079 x SW + 11.53 SD(1 .2:1) Metric PD= 1.135 x SW + 0.334 Inch PD= 1.135 x SW +13.15 SD(1. 7:1) Metric PD= 1.4304 x SW + 0.4908 Inch PD= [...]

Insert card RCU 5975696 BARCODATA 2100 140798 Insert card RCU 5975696 BARCODATA 2100 140798 " "[...]