Barco R9001390 инструкция обслуживания

OWNER'S MANUAL REALITY 9200 TCR+ R9001390[...]

[...]

BARCO PROJECTION SYSTEMS Date : 020798 OWNER'S MANUAL REALITY 9200 TCR+ R9001390 Art. No. : R5975938[...]

Due to constant research, the information in this manual is subject to change without notice. Produced by BARCO NV, July 1998. All rights reserved. Trademarks are the rights of their respective owners. BARCO n.v./Projection Systems Noordlaan 5 B-8520 Kuurne Belgium Tel : +32/56/368211 Fax : +32/56/351651 E-mail : sales.bps@barco.com Visite Barco at[...]

i-1 Table of Contents 5975938 BARCOREALITY 9200TCR+ 020798 TABLE OF CONTENTS .............................................................................................................. ............................................................. i-1 UNPACKING AND DIMENSIONS .......................................................................[...]

i-2 Table of Contents 5975938 BARCOREALITY 9200TCR+ 020798 Options ........................................................................................................................ ................................................................ 8-11 INSTALLATION MODE ..........................................................................[...]

1-1 Unpacking and Dimensions 5975938 BARCOREALITY 9200TCR+ 020798 1 1 23 4 5 379 Pull To op en UNP ACKING AND DIMENSIONS Unpacking To open the banding, pull on the clip as shown in the first drawing. Take the projector out of its shipping carton and place it on a table. For transportation, the projector is mounted on a wooden board with 3 bolts. Us[...]

1-2 Unpacking and Dimensions 5975938 BARCOREALITY 9200TCR+ 020798 310a.D RW Battery installation in the RCU. A battery (not yet installed to save the battery life time) is delivered inside the plastic bag with the power cord. To install the battery, remove the battery cover on the backside of the remote control by pushing the indicated handle a lit[...]

2-1 Installation Guidelines 5975938 BARCOREALITY 9200TCR+ 020798 2 INST ALLA TION GUIDELINES Installation Guidelines Careful consideration of things such as image size, ambient light level, projector placement and type of screen to use are critical to the optimum use of the projection system. * Environment Do not install the projection system in a [...]

2-2 Installation Guidelines 5975938 BARCOREALITY 9200TCR+ 020798 B = Distance between ceiling and top of the screen or between floor and bottom of the screen. A = Correction value, distance between bottom side of projector (without feet) and middle of the lens. Value to be subtracted from B to obtain the correct installation position. (A value is a[...]

3-1 Location and Functions of Control 5975938 BARCOREALITY 9200TCR+ 020798 3 RS 23 2 IN REMOTE PROJECTOR MO DE : GREEN - OPER ATION RED - S TANDB Y COMMUN ICATI ON PORT (800- PERIPHER ALS) RS232 OU T IR-ACK NOWLEDGED IR -REC EIVE D DIAGNOST ICS CODE IR-R ECEI VER 0 I This device com plies with Pa rt 15 of the FCC rules. Operation is subject to f ol[...]

3-2 Location and Functions of Control 5975938 BARCOREALITY 9200TCR+ 020798 - + - + - + - + - + 0 9 7 8 6 5 4 3 2 1 32a - + ? COLOR PHASE SHARPN TINT BRIGHTN STANDBY ENTER TEXT EXI T PAUSE b. Remote control This remote control includes a battery powered infrared (IR) trans- mitter that allows the user to control the projector remotely. This remote c[...]

Installation Set Up 4-1 5975938 BARCOREALITY 9200TCR+ 020798 4 INST ALLA TION SET UP The projector can be installed to project images in four different configurations : front/table, front/ceiling, rear/table and rear/ceiling. To change the Configuration, enter the adjustment mode by pushing ADJUST or ENTER . Highlight Installation by pushing the co[...]

Installation Set Up 4-2 5975938 BARCOREALITY 9200TCR+ 020798[...]

5-1 Connections 5975938 BARCOREALITY 9200TCR+ 020798 5 R G BV RGB H / C V On 98 27910 RGB H / C V H RS 232 I N REMO TE PROJ ECTOR MODE : GREE N - OPERA TI ON RED - STANDBY COMMU NIC AT ION P ORT (800- PERIPHERALS) RS 232 OUT IR- AC KNO WL ED GE D IR-RECEIVED DIA GNO S TIC S CODE IR -RECEIV ER 0 I This dev ice c omplies wi th Part 15 of the F CC rul[...]

5-2 Connections 5975938 BARCOREALITY 9200TCR+ 020798 RGB V RGB H / C V On 98 27 910 RGB H / C V H RS 232 IN REMO TE PROJ ECTOR M ODE : GR EE N - OPER ATION RED - STANDB Y C OMMUN IC ATI O N PORT (8 00-PE RIPHE RALS) RS232 OUT IR-ACKNOWLEDG ED IR-RECEIVED DIAG NOSTIC S CODE IR-RECEIVER 0 I This device complies with Part 15 of the F CC rules. Oper at[...]

5-3 Connections 5975938 BARCOREALITY 9200TCR+ 020798 Select with or then <ENTER> <EXIT> to return. RGB V RGB H / C V On 98 27 91 0 RGB H / C V H RS 232 IN REMOT E PROJECTOR MODE : GREEN - OPERAT ION RED - STA NDBY COMMUN IC ATI ON PO RT (800-PERIPHERA LS) RS232 OU T IR-A CKNO WLED GED IR-RECEIVED DIAGNOST ICS COD E IR-RECEIVER SDI IN SD[...]

5-4 Connections 5975938 BARCOREALITY 9200TCR+ 020798 RGB V RGB H / C V H RS 232 IN REMO TE PROJ ECTOR MODE : GRE EN - OPER AT I ON RED - STAND BY C O M M U N IC A T IO N P O R T (800-PERIPHER ALS) RS 232 OU T IR-A CKNO WLED GED IR-R ECEI VED DIAGNOS TICS CODE Fixed 5-Input Slot (slot 2) Slot 2 has 5 BNC input terminals. The following signals can be[...]

5-5 Connections 5975938 BARCOREALITY 9200TCR+ 020798 S- V I D EO 98 27 900 VI DEO LR AUDI O On On TV t une r, e. g. TV D M 40 stereo VCR Audi o am pl i f i er C o m p o s ite Vi deo VCR S-VHS Lum a/ Chro m a RGB V RGB H / C V On 98 27910 RGB H / C V H RS 232 IN REMOT E PR OJ E C T O R M ODE : GREEN - OPERATI ON RED - STANDBY COMMUNI CATI ON P ORT ([...]

5-6 Connections 5975938 BARCOREALITY 9200TCR+ 020798 R G B H / C V On 98 27910 Float i ng Non-Fl oati ng R G BV RGB H / C V On 98 27 910 R G B H / C V H RS 232 IN REMOT E PROJECTOR MODE : GREEN - OPERAT ION RED - STA NDBY COM M UN ICATION PO RT (800-PERIPHERALS) RS2 32 OU T IR-ACK NOWLE DGED IR-RECEIVED DIAGNOSTICS CODE IR-RECEIVER SDI IN SDI OU T [...]

5-7 Connections 5975938 BARCOREALITY 9200TCR+ 020798 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. HDTV VCR RGB V RGB H / C V On 98 279 10 RGB H / C V H RS 232 IN REMOTE PROJECTOR M ODE : GREEN - OPERATION RED - STANDBY COMMUNICATI ON PORT (800- PERIPHERALS) RS2 32 OUT I R-ACK NO[...]

5-8 Connections 5975938 BARCOREALITY 9200TCR+ 020798 RGB H / C V On 98 2 7920 HDTV VCR RGB V RGB H / C V On 98 27910 RGB H / C V H RS 232 IN REMOTE PROJECTOR MO D E : GREEN - OPERATION RED - ST ANDBY COMMUNICATI ON PORT ( 800-PERI PHERALS) RS232 OU T IR-ACKNOWLEDG ED IR-R ECE IVED DIAG NOST ICS CODE IR-REC EIVE R SDI IN SD I OUT Fl o at i ng Non-Fl[...]

5-9 Connections 5975938 BARCOREALITY 9200TCR+ 020798 DI GI TAL VI DEO SOURCE Di gi t al Vi de o RGB V RGB H / C V On 98 27 910 RGB H / C V H RS 232 IN REMOTE PROJECT OR M OD E : GREEN - OPER AT ION RED - STAND BY COM MUNICATION PORT (800 -PERIPHERALS) RS232 OUT IR-ACKNOWLEDGED IR- RECEIV ED DIAGN OSTI CS CODE I R-R ECEI VER SDI IN SDI OUT Fl oat i [...]

5-10 Connections 5975938 BARCOREALITY 9200TCR+ 020798 Screen Communi cat i on c abl e Proj ec t or IR R em o te R ece iver 800 Project i on room C ontrol r oom RGB V RGB H / C V On 98 27 9 10 RGB H / C V H RS 232 IN REMOTE PROJECT OR MODE : GREEN - OPERATI ON RED - S TANDB Y COMMUNI CATI ON PO RT (800-PER IPHE RALS) RS232 OU T IR -ACKNO WLEDGED IR-[...]

6-1 Controlling 5975938 BARCOREALITY 9200TCR+ 020798 6 C e ilin g Screen I R sensor RCU RGB V RGB H / C V On 98 27910 R G B H / C V H RS 232 I N REMOT E PROJECTOR MODE : GREEN - OPERATION RED - STANDBY COMM UNICATION PORT (800-PERIPH ERAL S) RS232 OUT IR-A CKN OWL EDGED IR-RECEIVED DIAG NO S TI CS CODE IR -RECEIVER 0 I This device complies with Par[...]

6-2 Controlling 5975938 BARCOREALITY 9200TCR+ 020798 0 127 How to Display a Projector Address? Press the ADDRESS key (recessed key on the RCU) with a pencil. The projector's address will be displayed in a 'Text box'. This text box disappears after a few seconds. To continue using the RCU, it is necessary to enter the same address wit[...]

7-1 Start up of the Adjustment Mode 5975109 BARCOREALITY 9200TCR+ 020798 7 ST ART UP OF THE ADJUSTMENT MODE Adjustment Mode All source parameters, picture tuning and geometry are made while in the 'Adjustment Mode' . Press the ADJUST or ENTER key to enter the 'Adjustment mode'. You are now in the 'Adjustment Mode'. The[...]

7-2 Start up of the Adjustment Mode 5975109 BARCOREALITY 9200TCR+ 020798[...]

8-1 Random Access Adjustment Mode 5975938 BARCOREALITY 9200TCR+ 020798 8 RANDOM ACCESS ADJUSTMENT MODE ADJUSTMENT MODE Select a path from below : RANDOM ACCESS INSTALLATION SERVICE Source 01 Select with or then <ENTER> <EXIT> to return. Starting up the Random Access Adjustment Mode Push the control disc up or down to highlight 'Ran[...]

8-2 Random Access Adjustment Mode 5975938 BARCOREALITY 9200TCR+ 020798 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Highlight File Service by pushing the control disc up or down and press ENTER to select. The File service[...]

8-3 Random Access Adjustment Mode 5975938 BARCOREALITY 9200TCR+ 020798 The file name will be displayed in the upper right corner. The following items can be adjusted : Total quantity horizontal pixels Active quantity horizontal pixels Horizontal start in pixels Horizontal period in µs (is automatically adapted during the instal- lation of a file w[...]

8-4 Random Access Adjustment Mode 5975938 BARCOREALITY 9200TCR+ 020798 Select with or <ENTER> to toggle or to change value <EXIT> to return EDIT FILE OPTIONS Source number 1 Clamp position [leading] Clamp delay 0 Clamp width 10 Field polarity [pos] Field select [both] Vertical refresh [sync] Vert. sync polarity [leading] Sync puls e Cla[...]

8-5 Random Access Adjustment Mode 5975938 BARCOREALITY 9200TCR+ 020798 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Rename To change the name of a selected file. Use the control disc to select RENAME and press ENTER . The Rename selection menu will be displayed. Use the control [...]

8-6 Random Access Adjustment Mode 5975938 BARCOREALITY 9200TCR+ 020798 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Delete To delete a selected file out of the list of files. Use the control disc to select DELETE and pres[...]

8-7 Random Access Adjustment Mode 5975938 BARCOREALITY 9200TCR+ 020798 0 2.5 CTI ON/OFF CTI : Color Transient Improvement. To improve the transition from one color to another. Highlight CTI by pushing the control disc up or down and press ENTER to toggle between ON and OFF. This function applies to PAL and NTSC video or S-video inputs only. Still V[...]

8-8 Random Access Adjustment Mode 5975938 BARCOREALITY 9200TCR+ 020798 3 Dynamic Color Depth Increases color contrast for all video and data sources. Highlight Dynamic color depth by pushing the control disc up or down and press ENTER to select. OFF : default position MIN : half of the effect of MED. MED : maximum color contrast without change in c[...]

8-9 Random Access Adjustment Mode 5975938 BARCOREALITY 9200TCR+ 020798 Select with or then <ENTER> <EXIT> to return. RANDOM ACCESS ADJUSTMENT MODE FILE SERVICE PICTURE TUNING GEOMETRY GEOMETRY SHIFT SIZE SIDE KEYSTONE BLANKING OPTIONS Select with or then <ENTER> <EXIT> to return. GEOMETRY SHIFT SIZE SIDE KEYSTONE BLANKING OP[...]

8-10 Random Access Adjustment Mode 5975938 BARCOREALITY 9200TCR+ 020798 Size Highlight Size by pushing the control disc up or down and press ENTER to select. The size can be adjusted in a vertical or horizontal way. When adjusting the vertical size, The upper side of the image is fixed (table and ceiling mounted configurations) and only the lower s[...]

8-11 Random Access Adjustment Mode 5975938 BARCOREALITY 9200TCR+ 020798 Adjustment of the blanking on the top of the image Select with or then <ENTER> <EXIT> to return. Bottom bl anki ng Top bl anki ng Rig ht blank ing Left blank ing Adjustment of the blanking on the bottom of the image Correct by pushing the control disc up or down Adj[...]

8-12 Random Access Adjustment Mode 5975938 BARCOREALITY 9200TCR+ 020798[...]

9-1 Installation Mode 5975938 BARCOREALITY 9200TCR+ 020798 9 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. INST ALLA TION MODE Starting up the Installation Mode Push the control disc up or down to highlight Installation and then press ENTER . ENTER continues to the Installation m[...]

9-2 Installation Mode 5975938 BARCOREALITY 9200TCR+ 020798 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. 800 Peripheral When a RCVDS05 is connected to the projector, the type of output module of this RCVDS05 has to be defined in the 800 peripheral menu. The type of output module [...]

9-3 Installation Mode 5975938 BARCOREALITY 9200TCR+ 020798 CONVERGENCE GREEN TO MIDPOSITION GREEN BLUE ON GREEN RED ON GREEN HATCH ABOUT MOCA GREEN TO MIDPOSITION Are you sure to set the green motorized convergence adjustment to midposition ? This adjustment cannot be undone afterwards ! <ENTER> to continue <EXIT> to cancel Green to Mid[...]

9-4 Installation Mode 5975938 BARCOREALITY 9200TCR+ 020798 Red on Green convergence 1 Highlight 'Red on Green' by pushing the Control disc up or down and press ENTER to display the Red on green test pattern. The drawings and digit will be displayed in red. 2 Adjust position 1, 2 and 3 to obtain an optimal focus for these lines. 3 Due to i[...]

9-5 Installation Mode 5975938 BARCOREALITY 9200TCR+ 020798 Select with or then <ENTER> <EXIT> to return. Configuration Highlight "Configuration" by pushing the control disc up or down and press ENTER to select. For more information, see Projector configuration in chapter 4 : 'Installation Set Up'. OSD color (On-Scree[...]

9-6 Installation Mode 5975938 BARCOREALITY 9200TCR+ 020798[...]

Service Mode 10-1 5975938 BARCOREALITY 9200TCR+ 020798 10 Select with or then <ENTER> <EXIT> to return. SERVICE MODE Starting up the Service Mode Push the control disc up or down to highlight Service and then press ENTER . Some items in the Service mode are password protected (when the password function is active). Enter your password t[...]

Service Mode 10-2 5975938 BARCOREALITY 9200TCR+ 020798 SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS CHANGE BAUDRATE PC RESET LAMP RUNTIME LAMP RUNTINE HISTORY LAMP DRIVE MODE MORE... Select with or then <ENTER> <EXIT> to return. SERVICE BARCO LOGO PANEL ADJUSTMENTS PRESET INPUT BALANCE I2C DIAGNOSIS MORE..[...]

Service Mode 10-3 5975938 BARCOREALITY 9200TCR+ 020798 RGB V RGB H / C V On 98 27910 RGB H / C V H RS 23 2 IN REMOTE PROJECTOR M ODE : GREEN - O PERATION RED - ST AND B Y COMMU NICATION PORT (800-PER IPHER ALS) RS232 OUT IR-ACKNOWLEDG ED IR-REC EIVE D DIAG NOSTIC S COD E IR-RE CEI VER 0 I Thi s dev i ce com pli e s wi th Part 15 of th e FCC rul es.[...]

Service Mode 10-4 5975938 BARCOREALITY 9200TCR+ 020798 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS CHANGE BAUDRATE PC RESET LAMP RUNTIME LAMP RU[...]

Service Mode 10-5 5975938 BARCOREALITY 9200TCR+ 020798 Select with or then <ENTER> <EXIT> to return. LAMP DRIVE MODE SILENT NORMAL BOOST Select with or then <ENTER> <EXIT> to return . Lamp Run Time History To get an overview of the different lamp run times, highlight Lamp Run Time History by pushing the control disc up or do[...]

Service Mode 10-6 5975938 BARCOREALITY 9200TCR+ 020798 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. I2C diagnosis. Gives an overview of the correct working of the I²C controlled IC's. Highlight I2C diagnosis by push[...]

A-1 Appendix A : Standard Source Set Up Files 5975938A BARCOREALITY 9200 DLC 020798 A ST ANDARD SOURCE SET UP FILES Name : name of file, contains the settings Resolution : image resolution, when fol- lowed by ...I means interlaced. FVERT Hz : vertical frame frequency of the source FHOR kHz : horizontal frequency of the source. FPIX MHz : pixel freq[...]

A-2 Appendix A : Standard Source Set Up Files 5975938A BARCOREALITY 9200 DLC 020798 NAME RESOLUTION FVERT FHOR FPIX PTOT PACT LTOT LACT Hz kHz MH z PAM500 640 X 400 60,000 26,400 22,810 86 4 840 440 400 PAM800 1120 X 375I 89,872 36,443 50,000 1372 1120 4 06 375 PC98_1 640 X 400 56,416 24,823 21,050 84 8 640 440 400 PC98_2 1120 X 375I 79,987 32,835 [...]

B-1 Lenses 5975938 BARCOREALITY 9200 TCR+ 020798 B Loosen the fastener ring of the lens by turning counter clockwise. Focus the image by turning the lens barrel to the left or the right. Attention : Do not turn out the lens too far, otherwise it will fall out of the lens holder. When the image is focused, secure the correct position of the lens wit[...]

B-2 Lenses 5975938 BARCOREALITY 9200 TCR+ 020798 Lenses e m a N s n e l h t g n e L ) h c n i ( m m s n e l . m a i d ) h c n i ( m m t h g i e w ) s b l ( g k r e b m u n r e d r o ) 1 : 2 . 1 ( D H Q) 6 9 . 9 ( 3 5 2) 4 4 . 7 ( 9 8 1) 2 . 9 1 ( 7 . 80 6 7 9 2 8 9 R ) 1 : 2 . 2 ( D H) 5 2 . 9 ( 5 3 2) 9 3 . 5 ( 7 3 1) 5 . 6 1 ( 5 . 70 6 0 9 2 8 9 [...]

C-1 Source Numbers 80 - 89 and 90 - 99 5975738 BARCOREALITY 9200TCR+ 020798 C SOURCE NUMBERS 80 - 89 AND 90 - 99 Projector without any 800 peripheral connected. The source numbers 80 - 89 and 90 - 99 do not correspond to physical inputs. An additional adjustment file can be created for these source numbers. This file can contain different settings.[...]

C-2 Source Numbers 80 - 89 and 90 - 99 5975738 BARCOREALITY 9200TCR+ 020798 Source numbers 81 - 85 Only valid if no input module is connected to slot 81 - 85 of a RCVDS05. The source numbers 81 - 85 correspond to the physical inputs 1 - 5 of the projector. e.g. When slot 1 of the projector has to be selected, key in source number 81. The relationsh[...]

5975938 BARCOREALITY 9200TCR+ 020798 3[...]