Bazooka NOS8 инструкция обслуживания

Models: NOS6, N OS8, NOS8A, NOS8P , N OS8W , SCUBA8[...]

Dear Friend, Thank you for selecting Bazooka ® Mobile Audio for your car stereo system. This Bazooka subwoofer represents our continued commitment to efficiency and design. An innovative manufacturing process we developed for the Bazooka provides consumers with state-of-the-art speaker system design. At Bazooka Mobile Audio, we take pride manufact[...]

2 WARRANTY All SAS ® subwoofer products are covered under warranty for ONE full year from the date of purchase. T erms and conditions of the warranty are as stated on the warranty card included in the box with the product. SAS recommends that you use only authorized BAZOOKA ® dealers to install this product. Improper or incorrectly performed inst[...]

Woofer Size 6.5 (NOS6) 8 (NOS8, NOS8W , NOS8P) V oice Coil Size 1 high power . /high temp. 2 high pwr . /h igh tem p . Magnet Size 20 oz. 36 oz. Fr eq ue ncy resp on se * 39-1 500 hz. 39-1500 hz. Efficiency* 100 dB* 1 02 dB* Power Handling 6-100 watts/channel 6-300 watts/channel Dimensions 18x6.75x8 27.5" x 8.5" x 10&[...]

INST ALLA TION Please take time to read through this manual and plan out your installation before you begin! Locate an area in the rear of the vehicle where you would like to place the Bazooka speaker systems. The location you have selected must meet the following requirements in order for the Bazooka to be properly installed in the vehicle: 1.) Th[...]

5 FINISHING THE LOOK (Step 1) In order to complete the look of your subwoofer , you will need to install the included wire loom over the wire and attach the nozzle to the top of the tank. T o begin, the wiring needs to be routed THROUGH the nozzle. If necessary , begin by feeding the wire through the nozzle as shown in the picture below . Continue [...]

6 Next, install the wire loom by pushing the loom onto the wire, as shown in below. Starting from the free end and working your way up to the nozzle. ( Note: Pulling the wire loom will r esult in binding, making it more dif ficult to put the loom in place. ) Remove the locking nut from the nozzle by turning counter -clockwise ¼ turn. Once the wire[...]

HA TCHBACK INST ALLA TION tube size is exaggerated for emphasis TRUCK INST ALLA TION tube size is exaggerated for emphasis SEDAN INST ALLA TION tube size is exaggerated for emphasis VEHICLE PLACEMENT RECOMMENDA TIONS 7[...]

8 Space floor mount brackets 13 apart (inside edge to inside edge) Floor Mount Bracket Mounting the NOS T ube: Once you have found a suitable location, you need to mount the NOS T ube. Mounting the unit ensures that it will give you years of trouble- free performance, and also guarantees that your unit is correctly oriented for it to operate pro[...]

Red Black RCA Green/White Orange RCA Brown/Gr ey POWER WIRE (NOS8A only) The power wire must be fused and connected directly to the positive terminal of the battery to provide a power source with a low voltage drop and low noise. Do not make the power connection at the fuse block or any point other than the battery . Improper power sources can redu[...]

10 antenna or power leads, or near sensitive equipment or harnesses. The power wire carries substantial currents and could induce noise. GROUND WIRE (NOS8A only) The ground wire must be connected directly to the vehicle chassis near the amplifier . W e do not recommend extending the ground wire in any installation, as this can cause unwanted ground[...]

If you have any questions contact the SAS T echnical Support Department at: Phone - (800) THE TUBE  Fax - (225) 272-9844 In Canada: (604) 988 2966 Email - tech@bazooka.com  W ebsite - www .bazooka.com 15049 Florida Blvd., Baton Rouge, LA. 70819 SAS, BAZOOKA, BASS TUBES, and LISTEN TO YOUR EARS are registered trademarks of Southern Audio Servi[...]