Beltronics V895 инструкция обслуживания

Beltronics 5442 West Chester Road West Chester OH 45069 USA USA 800-341-2288 Canada 800-268-3994 www.beltronics.com ©2005 Beltronics Made In Canada Features, specifications and prices subject to change without notice. Model: V895 DIGITAL RADAR • LASER • SAFETY DETECTOR Owner’s Manual 121V895-0 17813_Vector895 Manual 3/21/05 8:18 AM Page 1[...]

The Bel V895 is the most advanced radar, laser and safety detector ever designed by Beltronics. The Bel V895 includes full X, K, SuperWide Ka, and Safety Warning System radar capability, front and rear laser detection, varactor-tuned (VTO) microwave receiver, digital signal processing (DSP) for superior range and reduced false alarms, our patented [...]

T able of Contents Quick Refer ence Guide 4-5 Installation 6-7 • Power Connection 6 • Mounting Location 6 • Windshield Mount 7 Contr ols and Featur es 8- 1 0 • Power and Volume Control 8 • Power-on indication 8 • Voice 8 • AutoMute 8 • Mute 8 • Highway / AutoScan / City Button 9 • Brightness and Dark Mode 9 • Audible Alerts 1 [...]

Radar Antenna and Laser Lens The rear panel of your V895 should have a clear view of the road ahead. For best performance, do not mount the V895 directly behind windshield wipers or tinted areas. Page 6 Alphanumeric Matrix Display Your V895’s display will show Highway, AutoScan, or City as its power-on indication. If you prefer, you can choose ot[...]

Power Connection To power your V895, plug the small end of the power cord, (telephone-type connector) into the modular jack on the V895’s right side, and plug the lighter plug adapter into your vehicle’s lighter socket or accessory socket. Your V895 operates on 12 volts DC negative ground only . The lighter plug provided is a standard size and [...]

Contr ols and Featur es Power To turn your V895 on or off, press the PWR button located on the top. When you turn your V895 on, it goes through a sequence of alerts. If you prefer, you may program your V895 for a shorter power-on sequence. See the Programming section for details. V olume Press and hold the Volume/Mute button located on the top case[...]

Contr ols and Featur es 1 0 Power Connector The V895’s power jack uses a telephone- type connector. This 4-conductor connector only works with the included power cord, optional direct-wire, or SmartPlug cord. For more information or to order, call us toll-free at 1-800-341-2288. Signal Str ength Meter Your V895’s alphanumeric display consists o[...]

1 2 Over view of Pr ogramming 1 3 Pilot HWY Pilot H Voice ON Voice OFF PwrOn STD PwrOn FST aMute ON aMute OFF City STD City LoX City NoX Bands DFT Bands MOD POP ON or OFF (default is off) SWS ON or OFF (default is off) Press the CHANGE button to change your setting within a category * Full word: Highway or AutoScan or City Letter: H or A or C * Voi[...]

1 4 1 5 City Mode Sensitivity City STD (Standard) In this setting, when you put your V895 in the City mode, X-band sensitivity is signifi cantly reduced, to reduce annoyance from X-band intrusion alarms and motion sensors. (factory default) City LoX (Low X band sensitivity) In this setting, when you put your V895 in the City mode, X-band sensitivi[...]

1 6 1 7 T echnical Details Interpr eting Aler ts Although the V895 has a comprehensive warning system and this handbook is as complete as we can make it, only experience will teach you what to expect from your V895 and how to interpret what it tells you. The specifi c type of radar being used, the type of transmission (continuous or instant-on) an[...]

1 8 1 9 T echnical Details How Radar W orks Traffi c radar, which consists of microwaves, travels in straight lines and is easily refl ected by objects such as cars, trucks, even guardrails and overpasses. Radar works by directing its microwave beam down the road. As your vehicle travels into range, the microwave beam bounces off your car, and th[...]

20 2 1 T echnical Details How Safety Radar W orks Safety Warning System, or SWS, uses a modifi ed K-band radar signal. The SWS safety radar system has 64 possible messages (60 currently allocated). The SWS messages your V895 can display are listed on the facing page. From the factory, your V895 is programmed with SWS decoding OFF. If SWS is used i[...]

22 2 3 T r oubleshooting Pr oblem The V895 beeps briefl y at the same location every day, but no radar source is in sight. The V895 does not seem sensitive to radar or laser. The V895 did not alert when a police car was in view. The V895 did not provide a Safety signal while within range of an emergency vehicle. The V895’s display is not working[...]

24 2 5 Ser vice Ser vice Pr ocedur e If your V895 ever needs service, please follow these simple steps: 1 Check the troubleshooting section of this manual. It may have a solution to your problem. 2 Call us at 1-800-341-2288. We may be able to solve your problem over the phone. If the problem requires that you send your V895 to the factory for repai[...]

26 2 7 R egi st er o n li n e: @ ww w . beltr onics .co m BEL TRONICS PRODUCT REGISTRA TION CARD E If you purchased your detector directly from BELTRONICS, you do not need to fi ll this out. E If you did not purchase your detector directly from BELTRONICS, please fi ll out this section and return to us, or register online at our web address: www.[...]

28 H Remove car d along per forations H A TTN CUST OMER SER VICE BEL TR ONICS INC 5442 WEST CHESTER RD WEST CHESTER OH 45069-9789 17813_Vector895 Manual 3/21/05 8:18 AM Page 31[...]