BenQ MX722 инструкция обслуживания

MX722 Digital Pr ojector User Manual[...]

Table of contents 2 Ta b l e o f c o n t e n t s Important safety instructions ................... 3 Introduction .................. 7 Projector featu res .... ................... .............. 7 Shipping content s ....... ..................... .......... 8 Projector exte rior view.... ................... .... 9 Controls and functions . ..........[...]

Important safety inst ructions 3 Impor tant saf ety instructions Y our projector is designed and tested to meet the latest st andards f or safety of information technology equipment. Howev er , to ensur e safe use of this product, it is important that you follow the instructions mentioned in th is manual and mark ed on the pr o duct. Safety Instruc[...]

Important safety inst ructions 4 Safety Instructions (Continued) 7. The lamp becomes extr emely hot during operation. Allow the pr ojector to cool for appro xima tel y 45 m in utes prior to removing t he lamp assembl y for r eplacement. 8. Do not operate lamps beyo nd the rated lamp life. Excessive operation of lamps bey o nd the rated lif e could [...]

Important safety inst ructions 5 Safety Instructi ons (Continued) 13. Do not place this projector in an y of the following envir onments. - Space that is poorly ventilated or confined. Allow at least 50 cm clearance fr om walls and fr ee flow of air aroun d the projector . - Locations where te mperatur es may become excessively high, such as the in[...]

Important safety inst ructions 6 Safety Instructi ons (Continued) 17. Do not step on the projector or place any objects upon it. Besides pr obable ph ysical damage to the projector , doing so ma y result in accident s and possible injur y . 18. Do not place liquids near or on the projector . Liquids spill ed into the projector ma y cause it to fail[...]

Introduc tion 7 Intr oduction Pr ojector featur es The pr ojector offers the f ollo wing features. • Less than 0.5W in standb y condition Less than 0.5W powe r consumption under standby mode . • Filter Fr ee Filter free design to lo wer maintenance and operating costs. • Network Contr ol Integrated RJ45 connector for wir ed ne twork contr ol [...]

Introduction 8 Shipping contents Carefull y unpack and verify that y ou hav e all of the items shown belo w . If any of these items are missing, please contact y our place of purchase. Standard accessories The supp lied accessories w ill be suitable fo r y our r egion, and may diff er fr om thos e illustrated. *The warranty card is only supplied in[...]

Introduc tion 9 Pr ojector exterior view 1. External con tro l panel (See "Controls and functions" on page 10 for details.) 2. Lamp cov er 3. V ent (heated air exhaust) 4. Lens cap 5. Focus an d Zoom rings 6. V ent (cool air intak e) 7. Front IR r emote sensor 8. Projection lens 9. RJ45 LAN input jack 10. USB port 11. RS232 control port 1[...]

Introduction 10 Contr ols and functions Pr o jector 1. F ocus ring Adjusts the focus of the pr ojected image. 2. Zoom ring Adjusts the size of the image . 3. PO WER indicator light Lights up or flashes when the pr ojector is under operation. 4. T op IR remote sens or 5. MENU/EXIT T urns on the On-Screen Displa y (OSD) menu. Goes back to pr evious O[...]

Introduc tion 11 Remote contr ol 1. ON / OFF T oggles the projector between standb y mode and on. 2. Sour ce selection buttons (COMPUTER 1, COMPUTER 2, VIDEO, S-VI DEO, HDMI ) Selects an input sour ce for display . 3. MENU/EXIT T urns on the On-Screen Displa y (OSD) menu. Goes back to pre vio us OSD menu, exits and sa ves menu se ttings. 4. Left/ D[...]

Introduction 12 Remote contr ol effective range The remote control must be held at an an gle within 30 degr ees perpendicular to the projector's IR r emote control sensor(s) to function corre ct l y . The distance between the remote contr ol and the sensor(s) should not exceed 8 meters (~ 26 feet). Make s ure that ther e are no obstacles betw [...]

Introduc tion 13 Replacing the remote contr ol batteries 1. T o open the battery cover , turn the r emote control ov er to vie w its back, push on the finger grip on the cover and slide it up in the direction of the arrow as illustrated. The cover will slide off. 2. Remov e any existing batteries (if necessar y) and install tw o AA A batteries obse[...]

Positioning your project or 14 P ositioning y our projector Choosing a location Y our projector is designed to be installed in one of f our possible in sta llation locations: Y our room la yout or personal prefer ence will dictate which installation locatio n y ou select. T ake into consideration the size and position of y our screen, the lo cation[...]

Positioning your project or 15 Obtaining a pr eferr ed pr ojected image size The distance from the pr ojector lens to the screen, the zoom setting, and the video format each factors in the p rojected image size. Pr ojection dimensions Refer t o "Dimensions" on page 57 for the center of lens dimensions of this projector befor e calculating[...]

Connection 16 Connection When connecting a sig nal sour ce to the projector , be sure to: 1. T urn all equipment off befor e making any connections. 2. Use the corr ect signal cables for each sour ce . 3. Ensure the cables are firml y inserted. • In the conn ections shown below , some cables ma y not be included with the pr ojector (see "Shi[...]

Connection 17 LCD or a function key with a monitor symbol on th e notebook. Press FN and the labeled function ke y simultaneously . Refer to your notebook's document ation to f in d y our no t ebook's ke y combination. • The D-Sub outpu t only works when an ap propriate D-Sub input is made to the COMPUTER- 1 jack. • If you wish to use[...]

Connection 18 The table below describes the connection methods for differ ent devices, and wher e the sound is fr om. The projector can pla y sound if the connected RJ45 cabl e or USB cable carries audi o signal. There is no need to connect the audio cable when the Network Display sour ce is selected. About the microphone input • If you wish to u[...]

Operation 19 Operation Star ting up the pr ojector 1. Plug the power cor d into the pr ojecto r and into a powe r outlet. T urn on the power outlet switch (wher e fitted). Check that the PO WER indicator light on the projector lights orange after power has been applied. Please use the original accessories (e.g. pow er cord) only with the device to [...]

Operat ion 20 Adjusting the pr ojected image Adjusting the pr ojection angle T o a djust the pr ojec tor: Scre w the adjuster feet to fine-tune the horizontal angle. T o retract the feet, scr ew the adjuster fee t in a reve rse dir ect ion . If the pr ojector is not placed on a flat surface or the screen and the pr ojector are not perpendicular to [...]

Operation 21 Corr ecting k eystone K eystoning ref ers to the situation w here t he pr ojected image is notice ably wider at either the top or bottom. It occurs when the pr oj ector is not perpendicular to the screen. T o correct this, follow ONE of these steps: • Using the remote contr ol Press / on the pr ojector or remote contr ol to displa y [...]

Operat ion 22 Using the menus The projector is equipp ed with On-Scr een Display (OS D) menus for making various adjustment s and settings. The OSD screenshots below are f o r r eference on l y , and ma y differ from the actual design. Below is the ov erview of the OSD menu. The following example describes ho w to set the OSD language. 1. Press ME [...]

Operation 23 Securing the pr ojector Using a security cable lock The projector has to be installed in a safe pl ace to prev ent theft. Otherwise , pur chase a lock, such as the K e nsington lock, to secure the projector . Y ou can locate a K ensington lock slot on the rear side of the pr ojector . See item 22 on page 9 for details. A K ensington se[...]

Operat ion 24 If you f orget the passw ord If the passw ord function is activated, y ou will be ask ed to enter the six-digit password e ver y time you turn on the projector . If you enter the wrong passw ord, the passw ord error message as pictur ed to the right displa ys lasting for 3 seconds, and the INPUT PA S S W O R D message follows. Y ou ca[...]

Operation 25 Disabling the passw ord function T o disable password pr otection, go back to the SY STEM SETUP: Advanced > Security Settings > Change Security Settings menu after opening the OSD men u system . Pr es s MODE/E NTER. The message “INPUT P ASSW ORD” displa ys. Enter the current pass word. i. If the passwor d is co r rect, the OS[...]

Operat ion 26 To d o t h i s : 1. Press MENU/EXIT and the n press / until the SOURCE menu is highlighted. 2. Press to highlight Color Space Conversion and press / to select a suitable color space. This function is only available wh en the HDMI-input port is in use . Magnifying and sear ching for details If you need to find th e details on the pr oj[...]

Operation 27 About the aspect ratio • In the pictures below , the black portions are inac tive ar eas and the white por tions are activ e areas. • OSD menus can be displayed on those unused black areas. 1. Auto : Scales an image proportionally to fit the projector's nativ e resolution in its horizontal or vertical width. This is suitable f[...]

Operat ion 28 Optimizing the image Using W all Color In the situation wher e you ar e pr ojecting on to a colored surface such as a painted wall which ma y n ot be white, the Wall Color featur e can help correct the projected pictur e’ s colors to pre vent possible color difference betw een the sour ce and projected pictur es. T o use this functi[...]

Operation 29 6. Press to select a men u item to be ch anged and adjust the value with / . See "Fine-tuning the image quality in user modes" below for details. Fine-tuning the image quality in user modes According to the detected signal type and selected pictur e mo de, some of the below functions ma y not be available. Based on your needs[...]

Operat ion 30 Setting a prefer red color temperature T o set a preferr ed color temperature: 1. Highlight Color Temperature and select Warm , Normal or Cool b y pressi ng / on the projector or remote control. 2. Press to highlight Color Temperature Fine Tuning and pr ess MODE/ ENTER . The Color Temperatur e Fine Tuning page displays. 3. Press / to [...]

Operation 31 Please ref er to the illustration to the right for how the colors relate to each other . For example, if you select Red and set its range at 0, only pur e red in the projected picture will be selected. Incr easing its range will include red close to yellow and r ed close to magenta. 5. Press to highlight Saturation and adjus t its valu[...]

Operat ion 32 4. Press to h ighlight Timer Position and set t h e timer position by pressing / . 5. Press to highlight Timer Counti ng Direction and select your desir ed counting direction b y pr essing / . 6. Press to highlight Sound Reminder and decide if y ou want to activate sound reminder b y pressin g / . If you select On , a double beep soun[...]

Operation 33 Hiding the image In order to dra w the audience's full attention to the presenter , you can use BLANK on the projector or ECO BLANK on the remote contr ol t o hide the scr een image. The word “ BLANK ” appears in th e corner of the screen w hile the image is hidden. When this function is activated with an audio inpu t connecte[...]

Operat ion 34 Adjusting the sound The sound adjustments made as below will ha ve an effect on the projector speak er(s). Be sure y ou hav e made a correct connect ion to the pr ojector audio input. See "Connection" on page 16 for how the audio input is connected. Muting the sound T o tempora ril y turn o ff the sound: 1. Press MENU/EXIT a[...]

Operation 35 Using the teaching templates The pr ojector provides sev eral preset patterns fo r various teaching purposes. T o activate the pattern: 1. Open the OSD menu and go to the DISPLAY > Teaching Temp late menu and press / to select Blackboard or Whiteboard . 2. Press / to choose the pattern y ou need. 3. Press MODE/ ENTER to activate the[...]

Operat ion 36 Shutting down the pr ojector 1. Press POWER or OFF and a confirmation message will display pr ompting you . If you don't respond in a f ew seconds, the message will disappear . 2. Press POWER or OFF a second time. The PO WER indicator light flashes orange, the projection lamp shuts do wn, and the fans will continue to run for app[...]

Operation 37 Menu operation Menu system Please note that the on-screen displa y (OSD) menus var y according to the signal type selected and the projector model y ou are usin g. Main menu Sub-menu Options 1. DISPLAY Wall Co lor Off/Light Y ellow/Pink/Light Green/Blu e/ Blackboard Aspect Ratio Auto/Real/4:3/16:9/1 6:10 Keystone Position Phase H. Size[...]

Operat ion 38 Main menu Sub-menu Options 4. SYSTEM SETUP: Basic Presentation Timer Timer Period 1~240 minu tes Timer Display Alwa ys/3 min/2 min/1 min/Ne ver Timer Position T op-Left/Bottom-Left/T op -Right/ Bottom-Right Timer Coun ting Direction Count Down/C ount Up Sound Reminder On/Off On / Off Language Projector Installation Front T able/Rear T[...]

Operation 39 Main menu Sub-menu Options 5. SYSTEM SETUP: Advanced High Altitude Mode On/Off Audio Settings Mute On/Off Volume Microphone Volume Power On/Off Ring Tone On/Off Lamp Settings Lamp Mode Normal/Economic Reset Lamp Timer Equivalent Lamp Security Settings Change Password Change Security Settings Powe r On Loc k We b C o n t r o l L o c k B[...]

Operat ion 40 Note that the menu items ar e available when th e projector detects at least one valid signal. If there is no equipment connected to the pr ojector or no signal detected, limited menu items are accessible. 6. INFORMA TION Current System Status • Source • Picture Mode • Lamp Mode • Resolut ion • 3D Format • Color System •[...]

Operation 41 Description of each menu Function Description Wall Color Corre cts the pr ojected picture’ s color when the pr ojection surface is not white. See "Using W all Color" on page 28 f or details. Aspect Ratio There are sev eral options to set the image' s aspect ratio depending on your input signal source. See "Selecti[...]

Operat ion 42 Function Description Teaching Template See "Using the teaching templa tes" on page 35 for details. Picture Mode Pre-defined pictur e modes are pr ovided so you can optimize y our projector image set-up to su it your program type. See "Selecting a picture mode" on page 28 f or details. Reference Mode Selects a pictu[...]

Operation 43 Function Description Quick Auto Search See "Switching input signal" on page 25 for details. Color Space Conversion See "Changing Color Space" on page 25 f or details. Presentation Timer Reminds the presenter to finis h th e presentation within a certain time frame. See "Setting the presentation timer" on p[...]

Operat ion 44 Function Description Operation Settings Direct Power On Allows the projector to turn on au tomatically once the power is f ed through the pow er cord. Signal Power On Sets whether to turn the projecto r directly on without pr essing POWER or ON when the projector is in standby mode and the signal is f eed thr ough the V GA cable . Aut[...]

Operation 45 Function Description High Altitude Mode A mode for operation in high altitude areas. See "Operating in a high altitude envir onment" on page 33 for detai ls. Audio Settings See "Adjusting the sound" on page 34 for details. Lamp Settings Lamp Mode See "Setti ng Lamp M ode as E conomic" on page 49 for detail[...]

Operat ion 46 Function Description Standby Settings Network Selecting On enables the function. The projector is able to pr ovide the network function when it is in standby mode. Microphone Selecting On enables the function. The pr ojector can output the micr ophone signal when it is in standby mode and all th e necessary equipment is corr ectly con[...]

Operation 47 Function Description Current System Status Source Shows the current signal source. Picture Mode Shows the s elected mode in the PICTURE menu. Lamp Mode Sh ows th e curre nt la mp mo de. Resolution Shows the nativ e resolution of the input signal. 3D Format Shows the cur rent 3D mode. Color System Shows input system format: NTSC, P AL, [...]

Maintenance 48 Maintenance Car e of the projector Y our projector needs little maintenance. The on ly thing y ou need to do on a r egular basis is to keep th e lens and case clean. Nev er remove an y parts of the projector except th e lamp. Contact y our dealer if other parts need replacing. Cleaning the lens Clean the lens whenev er you notice dir[...]

Maintenance 49 Lamp information Getting to know the lamp hour When the projector is in operation, the durati on (in hours) of lamp usage is automatically calculated by the built-in timer . See "Setting Lamp Mode as Economic" below for more inf ormation on Economic mode. T o obta in the lamp hour information: 1. Press MENU/EXIT a nd then p[...]

Maintenance 50 Timing of r eplacing the lamp When the Lamp indicat or lights up r ed or a message appears suggesting i t is time to replace the lamp , please install a new lamp or consult your dealer . An old lamp ma y cause a malfunction in the pr ojector and in some instances the lamp ma y explode . Go to http://lamp .benq.com for a r eplacement [...]

Maintenance 51 Replacing the lamp • T o reduce the ri sk of electrical shock, alwa ys turn the projector off and disconnect the power cor d before changing the l amp. • T o reduce the risk of sev e r e burns, a llow the project or to cool for at least 45 minutes befor e r eplacing the lamp. • T o reduce the risk of injuries t o fingers and da[...]

Maintenance 52 14. Connect the pow e r and r estar t th e projector . Do not turn the power on with the lamp cover r emoved. 7. Use the handle to slowly pull the lamp out of the pr ojector . • Pulling it too quickly may caus e the lamp to break and scatter brok en glass in the projector . • Do not place the lamp in locations where water mig ht [...]

Maintenance 53 Resetting the lamp timer 15. After the startup logo , open the On-Sc reen Displa y (OSD) menu. Go to the SYSTEM SETUP: Advanced > Lamp Settings menu. Press MODE/ENTER . The Lamp Settin gs page displa ys. Highlight Reset Lamp Timer . A warning message is displa yed asking if you want to r eset the lamp timer . Hig h light Reset and[...]

Maintenance 54 Indicators Light Status & Description Po w e r e v e n t s Orange Off Off Stand-by mode. Green Flashing Off Off Pow ering up. Green Off Off Normal operation. Orange Flashing Off Off No rmal po wer -down cooling Red Off Off Download Green Off Re d CW start fail Red Flashing Off Off Scaler shutdown fail (data board) Red Off Red Sca[...]

Troubleshooting 55 T r oubleshooting The projector does not turn on. No picture Blurr ed image Remote contr ol does not work The passw ord is incorrect Cause Remedy There is n o pow er from the pow er cord. Plug the po wer cor d into the A C power jack on the pro jector , and plug the po wer cord into th e power outlet. If the power outlet has a sw[...]

Specifications 56 Specifications Pr ojector specifications All specifications ar e subject to change without notice . Optical Resolution 1024 x 768 XGA Display system 1-CHIP DMD Lens F/Number F = 2.59 -2.87 Lamp 300 W lamp Electrical Power supply AC100–240V , 4.5 A, 50-60 Hz (Automatic) Power consumption 398 W (Max); < 0.5 W (S tandby) Mechani[...]

Specificatio ns 57 Dimensions Ceiling mount installation 238 120.5 42 50.5 Unit: mm 339 633 25 127.7 577.7 537.9 125.99 176.29 254.29 130.93 71.46 228 65.5 84 242.04 338.99 Ceiling Mount screw: M4 (Max L = 25 mm; Mi n L = 20 mm) Unit: mm[...]

Specifications 58 Timing char t Suppor ted timing f or PC input • *Supported timing for 3D signal with Frame Sequential , Top Bottom and Side by Side for mat. **Suppor ted timing fo r 3D signal with Frame Sequential format. ***Supported timing for 3D signal with Top Bottom and Side by Side format . Resolution Mode Ve r t i c a l Fr equency (Hz) H[...]

Specificatio ns 59 • The timings showing above ma y not be su pported due to EDID file and VGA graphic card limitations. It is possible that some timings cannot be chosen. Suppor ted timing f or HDMI (HDCP) input • *Supported timing for 3D signal with Frame Sequential , Top Bottom and Side by Side for mat. **Suppor ted timing fo r 3D signal wit[...]

Specifications 60 *Supported timing f or 3D signal with Frame Sequ ential forma t. **Supported timing f o r 3D signal with Frame Packing form at. ***Supported timing f o r 3D signal with Side by Side format. Suppor ted timing f or Component-YP b P r input • * Supported timing f or 3D signal with Frame Sequential for mat. • Displa ying a 1080i(1[...]

Specificatio ns 61 Suppor ted timing f or Video and S-Video inputs * Supported timing for 3D signal wit h Frame Sequential fo rmat. Video mode Horizontal Freq uen cy ( kHz ) Ve r t i c a l F r e q u e n c y (Hz) Color sub-carrier Fr equency (MHz) NTSC* 15. 73 60 3.58 P AL 15.63 50 4.43 SECAM 15. 63 50 4 .25 or 4.41 P AL-M 15.73 60 3.58 P AL-N 15.63[...]

Warranty and Co pyright information 62 W arranty and Cop yright information Limited warranty BenQ warrants this pr oduct against any de fects in material an d workman s hip , under normal usage and storag e. Proof of pur chase date will be required with an y warranty claim. In the ev ent this product is found to be defective within the war r an ty [...]