Bissell 1699 инструкция обслуживания

Safety Instructions Product view / Accessories Assembly Features / Operations ProHeat ™ ClearView ® USER’S GUIDE 1699 SERIES - 120V 8905 SERIES - 120V 3 4 5 6-17 Routine Maintenance 18-20 T roubleshooting 21-22 Warranty 24 Replacement Parts 23 Consumer Services 22[...]

Thanks for buying a BISSELL ProHeat ™ ClearView ® W e’re glad you purchased a BISSELL ProHeat ClearView heated formula deep cleaner . Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Y our ProHeat ClearView is well made, and we back it with a limited one-year warranty .[...]

3 IMPOR T ANT SAFETY INSTRUCTIONS ■ Do not unplug by pulling on the cord. ■ Use only manufacturer’ s recommended attachments ■ Use only cleaning products formulated by BISSELL for use in this appliance ■ Keep openings free of dust, lint, hair , etc. ■ Do not point attachment nozzle at people or animals. ■ Keep appliance on a level sur[...]

4 SmartMix ® T ank DirtLifter ® PowerBrush Floor Nozzle Window SmartT emp ™ Ready Light ReadyT ools ™ Dial Lower Handle Belt Access Door Flow Indicator (Filter Inside) SmartMix ® Switch Flex Hose Power Cord Quick Release T ool Caddy SmartT emp ™ Switch T ank-in- T ank ™ Power Switch T rigger Upper Handle 4” Upholstery T ool Storage Han[...]

5 How T o Put It T ogether How to Use this Guide This User’ s Guide has been designed to help you get the utmost satisfaction from your BISSELL ProHeat ClearView . Y ou’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this Guide thoroughly before assembling you[...]

6 Special F eatures of Y our BISSELL ProHeat ™ ClearView ® The BISSELL SmartClean ® System The ProHeat ClearView is a home cleaning system that automatically mixes hot tap wa ter with the BISSELL advanced cleaning formula and heats the solution as it is applied to the carpet. The combination of heated cleaning solution, powered brush and suctio[...]

7 SmartMix Continued Replace SmartMix concentrate bottle. Note: If bottle leaks, check for proper positioning of o-ring and straw . Choose the SmartMix setting that fits the cleaning job. Water Rinse - use for gentle cleaning or for the final rinse after cleaning. Normal - automatically provides the best mix of water and concentrate for most cleani[...]

8 T ank-in-T ank Our T ank-in-T ank system is designed with a Bladder inside for clean water . As you clean, the Bladder will empty . Dirty water collects in the tank outside the Bladder . Step on handle release to lay the machine handle down out of the way . Lift the T ank-in-T ank handle. The handle locks the lid in place. Carry it like a bucket [...]

9 When It’ s T ime to Empty T ank-in-T ank 1. 2. 3. 4. 5. 6. 7. 8. 9. T ip: Thorough vacuuming before deep cleaning will prevent early clogging of lint trap . T ip: A special red float device in the tank will cause the cleaner to stop removing solution from the carpet and the motor sound will rise in pitch to let you know the dirty water tank is [...]

10 The Flow Indicator This is located on the machine base. It spins when the trigger is pressed to indicate that the machine is applying cleaning solution to the floor . It will stop spinning to indicate that the SmartMix bottle or Bladder needs to be refilled, or when the trigger is released. Flow Indicator does not spin when set to T ool setting.[...]

11 Disconnect the T urboBrush from the flex hose by pushing down on the button lock and pulling straight off. Once removed from the Flex Hose, the T urboBrush can be cleaned. A Move the switch to the “SUCTION” position. B Rinse under running water . C Check spray nozzle for dirt. If necessary , clean with a soft bristle brush. D Replace T urboB[...]

12 Pretreating is recommended to improve cleaning effectiveness for heavily soiled carpet in high traffic areas such as entryways and hall ways: Set the SmartMix dial to High T raffic . Set ReadyT ools dial to PreT reat . Plug into a proper outlet and turn on both the Power and Smart T emp Switches. While pressing the trigger slowly make several pa[...]

13 Stain Removal Do Not Delay! Failure to attend to an accident soon after it occurs may cause it to set and become permanent. Before treating any stain, follow these pre-treatment steps: Blot up liquids with an absorbent cloth or paper towels. White materials are recommended because certain dyes may bleed and make the stain worse. Gently scrape up[...]

14 1. Check manufacturer’ s tag before cleaning. “W” or “WS” on the tag means you can use your ProHeat ClearView . If the tag is coded with “X” or “S” (with a diagonal strike through), or says “Dry Clean Only , ” do not proceed. Do not use on velvet or silk. If manufacturer’ s tag is missing or not coded, check with your fur[...]

15 Set up the machine following instructions in the Features section, pages 6-11. Use BISSELL Advanced Cleaning Formulas in SmartMix tank. Set the ReadyT ools dial to T ools or PreT reat. * SmartT emp heats the cleaning solution for carpet and bare floor application only . It does not heat solution sprayed through the accessory tools. Set SmartMix [...]

16 1. 2. 3. 4. 5. 1. 2. 3. 4. 5. 6. Cleaning Bare Floors The Bare Floor T ool is included in select models only . If your ProHeat CleaView did not come so equipped, you may contact BISSELL Consumer Services at www .bissell.com or 1-800-237-761 to order one. The Bare Floor T ool provides effective cleaning for linoleum, vinyl, and tile floors. Cauti[...]

17 Machine Preparation Set up machine following instructions in the Features section, pages 6-11. Be sure to thoroughly rinse out any remaining Fiber Cleansing Formula from the SmartMix bottle to prevent slippery linoleum, vinyl, and tile floors. Use BISSELL Floor Cleansing Formula in the SmartMix tank. Check ReadyT ools Dial - it should be set on [...]

18 Routine Maintenance T urn Power and SmartT emp switches OFF . Unplug power cord from the outlet and coil around Power Cord Quick Release. Remove and rinse tools in clean, running water , dry and replace in the T ool Caddy . Coil Flex Hose around storage brackets on T ool Caddy . Remove T ank-In-T ank, dispose of dirty water . See F eatures secti[...]

T urn the machine off and unplug from the wall outlet. Step on the release pedal and recline the handle down onto floor (see illustration). Remove T ank-In-T ank and SmartMix tanks. Set them aside (see illustration). Remove Belt Access Door located near the Floor Cleaning/ T ools switch by inserting a flat head screwdriver into the slot nearest to [...]

20 With the unit still on its side, loop one end of the replacement pump belt around the red pump pulley and then the other end around the silver motor shaft (see illustration). Do not twist the replacement pump belt. R e-install the toothed brush belt first onto the red pump pulley and then onto the toothed end of the brush (see illustration). Re-[...]

21 T roubleshooting SmartT emp Ready Light does not illuminate. Possible Causes Remedies The SmartT emp switch is not T urn on the SmartT emp switch. turned ON. The machine Power Switch is not Both switches must be ON to turned ON. activate the SmartT emp Ready Light. Reduced spray or no spray Possible Causes Remedies Bladder may be empty . Refill [...]

22 BISSELL Consumer Ser vices For information about repairs or replacement parts, or questions about your warranty , call: BISSELL Consumer Services 1-800-237-7691 Monday - Friday 8 a.m. — 9 p.m. EST Saturday 9 a.m. — 5 p.m. EST Or write: BISSELL HOMECARE, INC PO Box 3606 Grand Rapids MI 49501 A TTN: Consumer Services Or visit the BISSELL websi[...]

23 Replacement parts - BISSELL ProHeat ClearView Item P art No. P art Name 1* 210-9201 4” Small Area T ool 2* 603-0910 6” Stair T ool 3* 210-9148 Spraying Crevice T ool 4* 210-1197 T urboBrush ® 5* 214-9131 Bare Floor T ool 6* 014-9142 PreT reat Wand 7* 215-9155 T ough Stain Brush 8 015-9043 T ank Assembly Complete 9 015-4439 T ank Lid Assembl[...]

24 This warranty gives you specific legal rights, and you may also have other rights which may var y from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover , please contact BISSELL Consumer Ser vices by E-mail, telephone, or regular mail as described below . Limited One Y ear W [...]