Bosch Appliances D1260 инструкция обслуживания

EN Owner's Manual Keypad D1260/D1260B[...]

D1260/D1260B | Owner's Manual 2 Bosch Security Systems | 9/04 | 50410D This system includes a telephone line seizure feature. The system may be programmed to communicate with a central monitoring station to report system events. You will not be able to use your phone while the system is communicating with the central monitoring station. In the[...]

D1260/D1260B | Owner's Manual | Contents Bosch Security Systems | 9/04 | 50410D 3 Special Alerts (COMMAND + 7 and COMMAND + 9) 30 Using COMMAND 7:.................................................... 30 Using COMMAND 9:.................................................... 31 Part III: Advanced Commands .................................. 32 Advan[...]

D1260/D1260B | Owner's Manual Contents 4 Bosch Security Systems | 9/04 | 50410D User (Token) Worksheet (User 227 to 249) (101-249 = D9412G only) .................................................................. 91 User (Passcode) Worksheet (Blank) .............................. 92 User (Token) Worksheet (Blank) ...............................[...]

D1260/D1260B | Owner's Manual | Contents Bosch Security Systems | 9/04 | 50410D 5 Int roduct ion Your security system helps to secure life, property, and investments against fire, theft, and bodily harm. The keypad is an advanced digital device that offers a variety of features not available with other systems. Its highly visible, backlit keyp[...]

D1260/D1260B | Owner's Manual | Introduction - About This Owner’s Manual 6 Bosch Security Systems | 9/04 | 50410D The numeric keypad section is a standard 3x4-keypad matrix that should be very familiar to you. It has been designed to closely resemble that of a standard telephone with the numeric keys of 1-0; and * and # keys. The display is [...]

D1260/D1260B | Owner's Manual | Part I: Security system basics Bosch Security Systems | 9/04 | 50410D 7 Part I : Securit y syst em basics Using the keypad Your security system provides quick access to functions by pressing the COMMAND key and one or two additional keys. D1260 D1260B Another way to access functions is through the Command Menu. [...]

D1260/D1260B | Owner's Manual | Part I: Security system basics - Points 8 Bosch Security Systems | 9/04 | 50410D Points What is a Point? A “point” is a detection device, or group of devices connected to your security system. Points display individually at the keypad with custom text. The text can describe a single door, motion sensor, smok[...]

D1260/D1260B | Owner's Manual | Part I: Security system basics - View Faulted or Bypassed Points Bosch Security Systems | 9/04 | 50410D 9 This manual uses the default idle state displays for examples of these idle states. Your security company may have programmed custom text for the idle displays in your system. The custom text and the default[...]

D1260/D1260B | Owner's Manual | Part I: Security system basics - Warning Displays and Tones 10 Bosch Security Systems | 9/04 | 50410D 4. The display returns to idle text after scrolling through the faulted and bypassed point information. The View Points> soft key will be shown when there are faulted points. To manually scroll faulted or byp[...]

D1260/D1260B | Owner's Manual | Part I: Security system basics - Fire Alarms Bosch Security Systems | 9/04 | 50410D 11 Fire Alarms Fire alarms are the highest priority events. When a fire point activates, your keypad emits a pulsating high- pitched fire tone. Evacuate all occupants and investigate for smoke or fire. Ensure that all occupants k[...]

D1260/D1260B | Owner's Manual | Part I: Security system basics - Burglary Alarms 12 Bosch Security Systems | 9/04 | 50410D Burglary Alarms Burglary alarms are the second priority. When a burglary point activates while your system is armed, your keypad emits a steady high-pitched burglary tone. The tone sounds for the time set by your security [...]

D1260/D1260B | Owner's Manual | Part I: Security system basics - Fire Trouble and Fire Supervisory Events Bosch Security Systems | 9/04 | 50410D 13 Fire Trouble and Fire Supervisory Events When a fire trouble or fire supervisory condition occurs, your keypad emits three warble tones, then a pause (repeatedly). The system displays the number of[...]

D1260/D1260B | Owner's Manual | Part I: Security system basics - Silencing an Alarm 14 Bosch Security Systems | 9/04 | 50410D Entry Delay Tone and Display When you enter an armed system through a point programmed for entry delay, the keypad emits a repeating warble tone and displays the following to remind you to turn off your security system.[...]

D1260/D1260B | Owner's Manual | Part II: System Commands - Entering a Passcode Bosch Security Systems | 9/04 | 50410D 15 Part I I : Syst em Commands Below is a summary of the commands covered in this section. Some of these functions may not be available in your system. Please consult your security company to determine which commands have been [...]

D1260/D1260B | Owner's Manual | Part II: System Commands - Turning On the System (Arming) 16 Bosch Security Systems | 9/04 | 50410D Turning On the System (Arming) Your security system can be turned on (armed) in many different ways, depending on the arming command used. Arming Commands are those commands used to turn on the system. The most ba[...]

D1260/D1260B | Owner's Manual | Part II: System Commands - Turning On the System (Arming) With Doors or Windo ws Open Bosch Security Systems | 9/04 | 50410D 17 Turning On the System (Arming) With Doors or Windows Open If a protected door or window is open, you may have the option of “force arming” with that point faulted. Faulted points (o[...]

D1260/D1260B | Owner's Manual | Part II: System Commands - Turning On the System (Arming) With Doors or Windows Open 18 Bosch Security Systems | 9/04 | 50410D 12. Once the last faulted point is displayed, pressing the Next> soft key will start displaying a summary and then specifics of any bypassed points. 13. Once the last bypassed point i[...]

D1260/D1260B | Owner's Manual | Part II: System Commands - MASTER ARM ? (COMMAND + 1) Bosch Security Systems | 9/04 | 50410D 19 MASTER ARM ? (COMMAND + 1) Description Use this function to turn on the entire system, both perimeter and interior. When you turn on the system, the display shows how many seconds of exit delay time you have to exit t[...]

D1260/D1260B | Owner's Manual | Part II: System Commands - MASTER ARM ? (COMMAND + 1) 20 Bosch Security Systems | 9/04 | 50410D Master Arming all Areas If you prefer, you may use the Master Arm ?> command in the Command Menu to initiate this function which will arm all available areas according to your authority level. 1. The display shows [...]

D1260/D1260B | Owner's Manual | Part II: System Commands - MASTER ARM INST ? (COMMAND + 1 + 1) Bosch Security Systems | 9/04 | 50410D 21 13. To disarm your security system, enter your personal passcode and press ENTER . 14. The display changes to show that all the areas are disarmed. Depending on what areas are armed or areas that you have aut[...]

D1260/D1260B | Owner's Manual | Part II: System Commands - PERIMETR INST (COMMAND + 2) 22 Bosch Security Systems | 9/04 | 50410D PERIMETR INST (COMMAND + 2) Turn On the Perimeter With No Delays Description Use this function to turn on only the perimeter of your building, leaving the interior of the building disarmed. This function allows no ex[...]

D1260/D1260B | Owner's Manual | Part II: System Commands - PERIMETR DELAY ? (COMMAND + 3) Bosch Security Systems | 9/04 | 50410D 23 PERIMETR DELAY ? (COMMAND + 3) Turn On the Perimeter With Delays Description In residential systems this function allows you to only arm the perimeter and exit through a door programmed for exit delay. The interio[...]

D1260/D1260B | Owner's Manual | Part II: System Commands - Silence the Trouble Sounder & Clear Trouble Display (COMMAND + 4) 24 Bosch Security Systems | 9/04 | 50410D Silence the Trouble Sounder & Clear Trouble Display (COMMAND + 4) Description Use COMMAND 4 to silence the trouble sounder during system events. This command also clears [...]

D1260/D1260B | Owner's Manual | Part II: System Commands - WALK TEST ? (COMMAND + 4 + 4) Bosch Security Systems | 9/04 | 50410D 25 4. Your system displays event summary lines and point text in this order: a. fire alarm summary line b. point text for each fire alarm event c. alarm summary line d. point text for each alarm event e. fire trouble [...]

D1260/D1260B | Owner's Manual | Part II: System Commands - WALK TEST ? (COMMAND + 4 + 4) 26 Bosch Security Systems | 9/04 | 50410D If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function. Press the MENU> soft key to enter the Command Menu. Press NEXT> soft key repeatedly. When you reach the WALK TE[...]

D1260/D1260B | Owner's Manual | Part II: System Commands - RESET SENSORS ? (COMMAND + 4 + 7) Bosch Security Systems | 9/04 | 50410D 27 RESET SENSORS ? (COMMAND + 4 + 7) Reset Sensors Description Detection devices, such as smoke detectors and shock sensors, must be reset after being activated. This function momentarily removes power from these [...]

D1260/D1260B | Owner's Manual | Part II: System Commands - WATCH MODE ? (COMMAND + 6) 28 Bosch Security Systems | 9/04 | 50410D WATCH MODE ? (COMMAND + 6) Watch Mode Description With your security system disarmed, you can use watch mode to monitor some points. Each time some points are faulted (door or window is opened) the keypad chimes once [...]

D1260/D1260B | Owner's Manual | Part II: System Commands - PERIMETR PART ? (COMMAND + 8) Bosch Security Systems | 9/04 | 50410D 29 If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function. Press the MENU> soft key to enter the Command Menu. Press NEXT> soft key repeatedly. When you reach the WATCH M[...]

D1260/D1260B | Owner's Manual | Part II: System Commands - Special Alerts (COMMAND + 7 and COMMAND + 9) 30 Bosch Security Systems | 9/04 | 50410D 4. When exit delay time expires and the system turns on, the display shows: 5. When performing a COMMAND 8 and no points are faulted or if the points return to normal before the exit delay time expir[...]

D1260/D1260B | Owner's Manual | Part II: System Commands - Special Alerts (COMMAND + 7 and COMMAND +9 ) Bosch Security Systems | 9/04 | 50410D 31 3. Your COMMAND 7 special alert has been programmed to:  notify your alarm company  ring a bell on your premises  display at your keypad Description: ________________________________________[...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - Advanced Commands 32 Bosch Security Systems | 9/04 | 50410D Part I I I : Advanced Commands Use this section of the manual to perform advanced system functions like add and delete user passcodes, reassign authority levels to user passcodes and operate or change programmed scheduled e[...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - BYPASS A POINT? (COMMAND + 0) Bosch Security Systems | 9/04 | 50410D 33 times. User Passcodes A three to six digit number entered at a keypad to access the system. BYPASS A POINT? (COMMAND + 0) Description This command allows you to bypass points that you do not want included in the[...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - BYPASS A POINT? (COMMAND + 0) 34 Bosch Security Systems | 9/04 | 50410D 5. If a digit is pressed, the display shows Enter point number: # . As soon as a digit key is pressed, the display changes to Entering point number: . (# is the point number entered) If you know the point number[...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - UNBYPASS A POINT? (COMMAND + 0 + 0) Bosch Security Systems | 9/04 | 50410D 35 UNBYPASS A POINT? ( COMMAND + 0 + 0) Description Unbypassing a point is a way to return a bypassed point to the security system so that it can once again respond to trouble and alarm conditions. Using Unby[...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - SEND REPORT ? (COMMAND + 4+1 or 4+2) 36 Bosch Security Systems | 9/04 | 50410D • FRONT DOOR is already bypassed. indicates that the point has already been bypassed. • FRONT DOOR cannot by bypassed. indicates the system is programmed not to allow that point to be bypassed. • In[...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - SEND REPORT ? (COMMAND + 4+1 or 4+2) Bosch Security Systems | 9/04 | 50410D 37 If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function. Press the MENU> soft key to enter the Command Menu. Press NEXT> soft key repeatedly. When you reach t[...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - REMOTE PROGRAM ? (COMMAND + 4 + 3) 38 Bosch Security Systems | 9/04 | 50410D REMOTE PROGRAM ? (COMMAND + 4 + 3) Description This function allows the user to initiate Remote Account Manager sessions. When the phone is ringing at the panel, the user initiates this function to have the[...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - REMOTE PROGRAM ? (COMMAND + 4 + 3) Bosch Security Systems | 9/04 | 50410D 39 11. At the conclusion of the programming session your system sends a report to the security company and then returns your telephone to normal service and your display to idle text. For systems with a phone [...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - CHANGE TIME/DATE (COMMAND + 4 + 5) 40 Bosch Security Systems | 9/04 | 50410D CHANGE TIME/DATE (COMMAND + 4 + 5) The time and date in your system must be correct for scheduled events to occur at the correct times. Check the time at least once a month to ensure accuracy. Use this func[...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - DOOR CONTROL (COMMAND + 4 + 6) Bosch Security Systems | 9/04 | 50410D 41 Enter the new date using a MM/DD/YY format. Ex: If the desired time is January 1, 2002, press 0 + 1 + 0 + 1 + 0 + 2 7. Press the Enter> soft key or the [ENTER] button. 8. The Time/Date Display> soft key i[...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - DOOR CONTROL (COMMAND + 4 + 6) 42 Bosch Security Systems | 9/04 | 50410D Cycle Door 1. If you wish to momentarily unlock an access door to allow a person into an area, press the Cycle Door> soft key. 2. The display will read * Cycle Door*1 2 3 4 5 6 7 8 if all door are at a norma[...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - Access Level Bosch Security Systems | 9/04 | 50410D 43 For example, if you wanted to secure Door 3, press 3 then press the ENTER key. The display changes to show that all the doors are at a normal state except for Door 3, which is secured. 4. Enter another door number to secure or p[...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - CHANGE DISPLAY (COMMAND + 4 + 9) 44 Bosch Security Systems | 9/04 | 50410D 8. After selecting whether to disable or enable the level, the display prompts you again to enter an Authority Level to modify. 9. Press the <Exit soft key when you are finished. CHANGE DISPLAY (COMMAND + [...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - EXTEND CLOSING (COMMAND + 5 + 1) Bosch Security Systems | 9/04 | 50410D 45 If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function. Press the MENU> soft key to enter the Command Menu. Press NEXT> soft key repeatedly. When you reach the C[...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - EXTEND CLOSING (COMMAND + 5 + 1) 46 Bosch Security Systems | 9/04 | 50410D If you have not armed or extended closing, the Please Close Now message and beep will reappear after 10 minutes. Your alarm company sets the length of time for the closing window. To extend the window, enter [...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - CHG SKEDS ? (COMMAND + 5 + 2) Bosch Security Systems | 9/04 | 50410D 47 CHG SKEDS ? (COMMAND + 5 + 2) Description A Sked is a function programmed to be performed automatically at a scheduled time by your security system. You can change the scheduled time for some functions, disable [...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - CHG SKEDS ? (COMMAND + 5 + 2) 48 Bosch Security Systems | 9/04 | 50410D • Only on holiday> Pressing this soft key will enable the sked only on holidays and change the first line of the display to Skd 1 X 08:00AM without the X . • Except on holiday> Pressing this soft key w[...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - CHG SKEDS ? (COMMAND + 5 + 2) Bosch Security Systems | 9/04 | 50410D 49 Table 4: Sked Table SKED # Except on Holiday Time Date Day of Week Function SKED 1 Yes / No S M T W T F S SKED 2 Yes / No S M T W T F S SKED 3 Yes / No S M T W T F S SKED 4 Yes / No S M T W T F S SKED 5 Yes / No[...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - DEL USER ? (COMMAND + 5 + 3) 50 Bosch Security Systems | 9/04 | 50410D DEL USER ? (COMMAND + 5 + 3) This function allows a user to be deleted. This function will delete the passcode, Master User, and all sub-users associated with the user number. 1. Ensure your keypad shows idle dis[...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - CHG RELAYS ? (COMMAND + 5 + 4) Bosch Security Systems | 9/04 | 50410D 51 CHG RELAYS ? (COMMAND + 5 + 4) Your security company may program relays for automatic control and/or control from your keypad of devices such as premises lighting or entry gates. Contact them for further inform[...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - CHG PASSCODES ? (COMMAND + 5 + 5) 52 Bosch Security Systems | 9/04 | 50410D • To avoid conflicting with other passcodes and duress codes, your system does not let you change passcodes to an existing passcode or to within plus or minus 2 of an existing passcode. For example, if 123[...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - ADD/CHANGE USER (COMMAND + 5 + 6) Bosch Security Systems | 9/04 | 50410D 53 If the passcode does not match, the command center will emit a error tone and display Passcode not changed. 9. The display automatically returns to idle text after three seconds. ADD/CHANGE USER (COMMAND + 5[...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - ADD/CHANGE USER (COMMAND + 5 + 6) 54 Bosch Security Systems | 9/04 | 50410D 5. Enter the user number and press either the Enter> soft key or the ENTER button. 6. The display changes to show the user number entered and the user’s name (if any). (User 2 is used as an example.) Pr[...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - ADD/CHANGE USER (COMMAND + 5 + 6) Bosch Security Systems | 9/04 | 50410D 55 3. The display changes to Enter new passcode: Enter the new passcode. As soon as a number is pressed, Entering: appears on the third line next to the asterisks. The passcode is shown as asterisks (*) when en[...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - ADD/CHANGE USER (COMMAND + 5 + 6) 56 Bosch Security Systems | 9/04 | 50410D If the passcode does not match, the command center will emit an error tone and display Passcode not changed . 5. Press the <Exit soft key to return to the Add/Change Menu . Add/Change Level 1. Pressing th[...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - ADD/CHANGE USER (COMMAND + 5 + 6) Bosch Security Systems | 9/04 | 50410D 57 Press the <Exit soft key to exit out of this menu and return to the Level changed. display. 6. Repeat Step 5 for each area through Area 8. 7. Once the user’s authority level has been verified for Area 8[...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - ADD/CHANGE USER (COMMAND + 5 + 6) 58 Bosch Security Systems | 9/04 | 50410D D9412/D7412: D9112/D7212: Press the <No soft key to reject the name and return to Step 1 . Add/Change Card 1. Pressing the Card> soft key will allow you to add/change a user’s access card or credenti[...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - ADD/CHANGE USER (COMMAND + 5 + 6) Bosch Security Systems | 9/04 | 50410D 59 5. If the card is accepted, the display changes to either Card added. or Card changed if the card already exists in your system. Pressing the <Exit soft key exits out of this function and returns the disp[...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - DEFAULT TEXT ? (COMMAND + 5 + 7) 60 Bosch Security Systems | 9/04 | 50410D 5. If the card you are trying to add to the system already exists, an error tone sounds and the display changes to Card already exists. Please try again. If 20 seconds elapse without pressing a key returns th[...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - FIRE TEST ? (COMMAND + 5 + 8) Bosch Security Systems | 9/04 | 50410D 61 4. The current state of the area is displayed for 3 seconds before returning to idle text. FIRE TEST ? (COMMAND + 5 + 8) Use this function to test fire points and other 24-hour points to be certain they function[...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - DISPLAY REV ? (COMMAND + 5 + 9) 62 Bosch Security Systems | 9/04 | 50410D 5. As you fault each point, your command center will display the point text for 60 seconds and ring the fire sounders for 2 seconds. This verifies that the detection device is working properly. Your system aut[...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - Bosch Security Systems | 9/04 | 50410D 63 2. Press the COMMAND key. The display shows *System Command* . 3. Press the 5 key and then the 9 key. If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function. Press the MENU> soft key to enter the C[...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - SERVICE MENU ? (9 + 9 + Enter) 64 Bosch Security Systems | 9/04 | 50410D Using View Log 1. Press the View Log ?> soft key. 2. The display changes to Enter start date: Press the Go to last event> soft key to go to the last event in the log. Press the <Exit soft key to exit t[...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - SERVICE MENU ? (9 + 9 + Enter) Bosch Security Systems | 9/04 | 50410D 65 Using Print Log 1. Press the Print Log ?> soft key. 2. The display changes to Enter start date: Press the Print all events> soft key to print all events in the log. Press the <Exit soft key to exit thi[...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - SERVICE MENU ? (9 + 9 + Enter) 66 Bosch Security Systems | 9/04 | 50410D If you know the point number, you can enter it by pressing its number key and then the ENTER key. The display will change to show the point that was entered. If the point is invalid the message “Invalid Point[...]

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - SERVICE MENU ? (9 + 9 + Enter) Bosch Security Systems | 9/04 | 50410D 67 • Low Brightness, • Contrast. Each of these selections have <- Level +> soft keys on either side of the display that allows you to increase (+) or decrease (-) the setting being displayed. The High an[...]

D1260/D1260B | Owner's Manual | Part IV: Multi-Area Use - Working with Multiple Areas from a Single Command Cent er 68 Bosch Security Systems | 9/04 | 50410D Part IV: Mult i-Area Use Working with Multiple Areas from a Single Command Center Each of the functions described in the preceding section on Advanced Commands is presented as though your[...]

D1260/D1260B | Owner's Manual | Part IV: Multi-Area Use - View Point Status Bosch Security Systems | 9/04 | 50410D 69 4. The display will change to show on the top line the area name and the current status on the second line. Pressing the Next> soft key will change the display to the next area and remain for 20 seconds or until the Next>[...]

D1260/D1260B | Owner's Manual | Part IV: Multi-Area Use - MOVE TO AREA ? (COMMAND + 5 + 0) 70 Bosch Security Systems | 9/04 | 50410D MOVE TO AREA ? (COMMAND + 5 + 0) With this function you can perform tasks in an area other than the one you’re in without having to physically go to that area. Your access to other areas is limited by the scope[...]

D1260/D1260B | Owner's Manual | Part IV: Multi-Area Use - Turning On the System Bosch Security Systems | 9/04 | 50410D 71 7. You are now able to perform tasks in this area. The number of areas to which you can move will be limited by the scope of the command center. If you try to move to an area for which the command center does not have scope[...]

D1260/D1260B | Owner's Manual | Part IV: Multi-Area Use - Turn On the Entire System Without Delays 72 Bosch Security Systems | 9/04 | 50410D 1. Enter your passcode and press ENTER. 2. The command center will display the following: Command center scope and/or your authority level limit the actual number of areas you may turn on. For example, if[...]

D1260/D1260B | Owner's Manual | Part IV: Multi-Area Use - Bosch Security Systems | 9/04 | 50410D 73 5. If the Next> soft key is pressed, the first area that can be armed (based on passcode entered and user authority level) is displayed ( AREA 1 WAREHOUSE is used an example of the first area that can be armed). 6. Pressing the Arm> soft k[...]

D1260/D1260B | Owner's Manual | Part IV: Multi-Area Use - Turning Off the System 74 Bosch Security Systems | 9/04 | 50410D 2. Press the Menu> key to enter the Command Menu. 3. Press the Next> soft key repeatedly until you reach the DISARM ?> prompt then press the adjacent soft key. 4. If entering through a door which is part of an are[...]

D1260/D1260B | Owner's Manual | Part IV: Multi-Area Use - Turning Off the System Bosch Security Systems | 9/04 | 50410D 75 5. Enter your passcode and press ENTER . The passcode is shown as asterisks (*) when entered and advance from the right side of the display to the left until all the passcode digits are entered. 6. If the entered passcode [...]

D1260/D1260B | Owner's Manual | Appendix - Supplementary Information for Adding Passcodes 76 Bosch Security Systems | 9/04 | 50410D Appendix Supplementary Information for Adding Passcodes Use the information contained in this Supplement to help you add user passcodes. User Authority Levels Your security company uses the information contained o[...]

D1260/D1260B | Owner's Manual | Appendix - Passcode Worksheet Bosch Security Systems | 9/04 | 50410D 77 Authority Levels 22 Print Log ? P E 23 User Command 7 ? CMD 7 P 24 User Command 9 ? CMD 9 P 25 Bypass a Point ? CMD 0 P E E E E 26 Unbypass a Point ? CMD 00 P E E E E 27 Reset Sensors ? CMD 47 E E E E E 28 Change Relays ? CMD 54 P E E 29 Rem[...]

D1260/D1260B | Owner's Manual | Appendix - Passcode Worksheet 78 Bosch Security Systems | 9/04 | 50410D User (Passcode) Worksheet (User 000 to 038) User User Area Authority ### Passcode Group 1 2 3 4 5 6 7 8 User Name 000 1 2 3 __ __ __ 15 15 15 15 15 15 15 15 SERVICE PASSCODE 001 123456 ________ ____ 1_ __ __ __ __ __ __ __ USER 1 002 __ __ _[...]

D1260/D1260B | Owner's Manual | Appendix - Passcode Worksheet Bosch Security Systems | 9/04 | 50410D 79 ♦ User (Token) Worksheet (User 000 to 038) D9412G/D7412G Only Use r Master ID ###-0 Sub-User ###-1 Sub-User ###-2 Sub-User ###-3 ## # Site Card Data Site Card Data Site Card Data Site Card Data 000 Not Available 001 002 003 004 005 006 007[...]

D1260/D1260B | Owner's Manual | Appendix - Passcode Worksheet 80 Bosch Security Systems | 9/04 | 50410D User (Passcode) Worksheet (User 039 to 075) User User Area Authority ### Passcode Group 1 2 3 4 5 6 7 8 User Name 039 __ __ __ __ __ __ ____ __ __ __ __ __ __ __ __ USER 39 040 __ __ __ __ __ __ ____ __ __ __ __ __ __ __ __ USER 40 041 __ __[...]

D1260/D1260B | Owner's Manual | Appendix - Passcode Worksheet Bosch Security Systems | 9/04 | 50410D 81 ♦ User (Token) Worksheet (User 039 to 075) D9412G/D7412G Only User Master ID ###-0 Sub-User ###-1 Sub-User ###-2 Sub-User ###-3 ### Site Card Data Site Card Data Site Card Data Site Card Data 039 040 041 042 043 044 045 046 047 048 049 050[...]

D1260/D1260B | Owner's Manual | Appendix - Passcode Worksheet 82 Bosch Security Systems | 9/04 | 50410D User (Passcode) Worksheet (User 076 to 114) (101-249 = D9412G only) User User Area Authority ### Passcode Group 1 2 3 4 5 6 7 8 User Name 076 __ __ __ __ __ __ ____ __ __ __ __ __ __ __ __ USER 76 077 __ __ __ __ __ __ ____ __ __ __ __ __ __[...]

D1260/D1260B | Owner's Manual | Appendix - Passcode Worksheet Bosch Security Systems | 9/04 | 50410D 83 ♦ User (Token) Worksheet (User 076 to 114) D9412G/D7412G Only (101-249 = D9412G only) User Master ID ###-0 Sub-User ###-1 Sub-User ###-2 Sub-User ###-3 ### Site Card Data Site Card Data Site Card Data Site Card Data 076 077 078 079 080 081[...]

D1260/D1260B | Owner's Manual | Appendix - Passcode Worksheet 84 Bosch Security Systems | 9/04 | 50410D User (Passcode) Worksheet (User 115 to 150) (101-249 = D9412G only) User User Area Authority ### Passcode Group 1 2 3 4 5 6 7 8 User Name 115 __ __ __ __ __ __ __ __ __ __ __ __ __ USER 115 116 __ __ __ __ __ __ __ __ __ __ __ __ __ USER 116[...]

D1260/D1260B | Owner's Manual | Appendix - Passcode Worksheet Bosch Security Systems | 9/04 | 50410D 85 User (Token) Worksheet (User 115 to 150) (101-249 = D9412G only) User Master ID ###-0 Sub-User ###-1 Sub-User ###-2 Sub-User ###-3 ### Site Card Data Site Card Data Site Card Data Site Card Data 115 116 117 118 119 120 121 122 123 124 End RA[...]

D1260/D1260B | Owner's Manual | Appendix - Passcode Worksheet 86 Bosch Security Systems | 9/04 | 50410D User (Passcode) Worksheet (User 151 to 189) (101-249 = D9412G only) User User Area Authority ### Passcode Group 1 2 3 4 5 6 7 8 User Name 151 __ __ __ __ __ __ ____ __ __ __ __ __ __ __ __ USER 151 _ 152 __ __ __ __ __ __ ____ __ __ __ __ __[...]

D1260/D1260B | Owner's Manual | Appendix - Passcode Worksheet Bosch Security Systems | 9/04 | 50410D 87 User (Token) Worksheet (User 151 to 189) (101-249 = D9412G only) User Master ID ###-0 Sub-User ###-1 Sub-User ###-2 Sub-User ###-3 ### Site Card Data Site Card Data Site Card Data Site Card Data 151 152 153 154 155 156 157 158 159 160 161 16[...]

D1260/D1260B | Owner's Manual | Appendix - Passcode Worksheet 88 Bosch Security Systems | 9/04 | 50410D User (Passcode) Worksheet (User 190 to 226) (101-249 = D9412G only) User User Area Authority ### Passcode Group 1 2 3 4 5 6 7 8 User Name 190 __ __ __ __ __ __ ____ __ __ __ __ __ __ __ __ USER 190 191 __ __ __ __ __ __ ____ __ __ __ __ __ _[...]

D1260/D1260B | Owner's Manual | Appendix - Passcode Worksheet Bosch Security Systems | 9/04 | 50410D 89 ♦ User (Token) Worksheet (User 190 to 226) D9412G/D7412G Only (101-249 = D9412G only) User Master ID ###-0 Sub-User ###-1 Sub-User ###-2 Sub-User ###-3 ### Site Card Data Site Card Data Site Card Data Site Card Data 190 191 192 193 194 195[...]

D1260/D1260B | Owner's Manual | Appendix - Passcode Worksheet 90 Bosch Security Systems | 9/04 | 50410D User (Passcode) Worksheet (User 227 to 249) (101-249 = D9412G only) User User Area Authority ### Passcode Group 1 2 3 4 5 6 7 8 User Name 227 __ __ __ __ __ __ ____ __ __ __ __ __ __ __ __ USER 227 228 __ __ __ __ __ __ ____ __ __ __ __ __ _[...]

D1260/D1260B | Owner's Manual | Appendix - Passcode Worksheet Bosch Security Systems | 9/04 | 50410D 91 User (Token) Worksheet (User 227 to 249) (101-249 = D9412G only) User Master ID ###-0 Sub-User ###-1 Sub-User ###-2 Sub-User ###-3 ### Site Card Data Site Card Data Site Card Data Site Card Data 227 228 229 230 231 232 233 234 235 236 237 23[...]

D1260/D1260B | Owner's Manual | Appendix - Passcode Worksheet 92 Bosch Security Systems | 9/04 | 50410D User (Passcode) Worksheet (Blank) Area Authority User ### Passcode User Group 1 2 3 4 5 6 7 8 User Name __ __ __ __ __ __ ____ __ __ __ __ __ __ __ __ USER ___ __ __ __ __ __ __ ____ __ __ __ __ __ __ __ __ USER ___ __ __ __ __ __ __ ____ __[...]

D1260/D1260B | Owner's Manual | Appendix - Security System Limitations Bosch Security Systems | 9/04 | 50410D 93 User (Token) Worksheet (Blank) Master ID ###-0 Sub-User ###-1 Sub-User ###-2 Sub-User ###-3 Use r ### Site Card Data Site Card Data Site Card Data Site Card Data Security System Limitations Not even the most advanced security system[...]

D1260/D1260B | Owner's Manual | Appendix - Fire Safety and Evacuation 94 Bosch Security Systems | 9/04 | 50410D Although having a security system may make you eligible for reduced insurance premiums, the system is no substitute for insurance. Warning devices cannot compensate you for loss of life or property. Fire Safety and Evacuation Residen[...]

D1260/D1260B | Owner's Manual | Appendix - Standard Displays Bosch Security Systems | 9/04 | 50410D 95 Standard Displays Your command center uses standard and custom displays to show the status of the security system. Many standard displays are described below. Your system may not use all of them. Descriptions of your custom text follow. Syste[...]

D1260/D1260B | Owner's Manual | Appendix - System Trouble Displays 96 Bosch Security Systems | 9/04 | 50410D System Trouble Displays If you see any of the system trouble displays shown below, contact your security company to determine whether repairs are needed. The Silence> soft key is only displayed if a trouble tone is present. Press the[...]

D1260/D1260B | Owner's Manual | Appendix - System Trouble Displays Bosch Security Systems | 9/04 | 50410D 97 Service Phone Line #1 (or #2) Indicates telephone line trouble. Call your phone company from another phone to report telephone trouble. This message may not appear in some systems. Service Printer Printer number could also be 18 or 19 I[...]

D1260/D1260B | Owner's Manual | Appendix - Security System Glossary 98 Bosch Security Systems | 9/04 | 50410D Security System Glossary Area A group of detection devices connected to your security system. Arm To turn on your controlled points (burglar detection devices). When an area is armed and a controlled point trips, an alarm occurs or ent[...]

D1260/D1260B | Owner's Manual | Appendix - Maintenance and Service Bosch Security Systems | 9/04 | 50410D 99 Maintenance and Service This security system requires very little maintenance, however, you should test the system weekly to ensure it is working properly. A test schedule and maintenance program can be arranged. If you notice a change [...]

© 2004 Bosch Security Systems 50410D Bosch Security Systems 130 Perinton Parkway Fairport, NY 14450-9199 Customer Service: (800) 289-0096 Technical Support: (888) 886-6189[...]