Bosch Appliances DKE 63 инструкция обслуживания

a de Gebrauchs- und Montageanleit ung en Operating and installat ion instruct ions fr Mode d’emploi et notice de mont age nl Gebruiksaanwijzing en montagevoorschrift it Istruzioni d’uso e per il montaggio es Instrucciones de uso y de montaje pt Instruções de serviçio e de montagem sv Bruks- och Monteringsanvisning no Bruks- og Monteringsanvi[...]

2 mind. 650 mind. 550 de Seite 0 3–1 3 en page 14 – 24 fr page 25 – 35 nl pagina 36 – 46 it pagina 47 – 57 es página 58 – 68 Abb. 1 ELEKTRO ELECTR. ELETT . EL. Abb. 1 GAS GAZ KAASU GASS pt página 0 6 9– 0 79 sv sid 0 80– 0 90 no side 0 91– 101 fi sivu 102 – 112 da side 113 – 123 tr Sayfa 124 – 134[...]

14 Appliance description Operating Instructions Operating modes Exhaust-air mode: ❑ The extractor -hood fan extracts the kit- chen vapours and conveys them through the grease filter into the atmospher e. ❑ The grease filter absorbs the solid particles in the kitchen vapours. ❑ The kitchen is kept almost free of gr ease and odours. D When th[...]

Before using for the first time If you encounter a problem If you have any questions or if a fault occurs, please call Customer Service. (See list of Customer Service r epr esentatives). When you call, please quote the following: E-Nr . FD Enter the relevant numbers into the box above. The E-Nr . (product no.) and FD (production date) ar e shown o[...]

16 Operating procedur e Filters and maintenance Grease filters: Metal filters are used to trap the gr easy element of the vapours that develop during cooking. The filter mats are made fr om non- combustible metal. Caution: As the filter becomes more and mor e saturated with grease, not only does the risk of it catching fire incr ease but the e[...]

Filters and maintenance Removing and inserting the metal grease filters: 1. Press the catch on the gr ease filters inwards and fold the filters down. 3. Insert the grease filters (see r emoval and installation of the metal-mesh grease filters). Removing the filter: The filters are r emoved in reverse sequence. Replacing the activated carbon [...]

18 Replacing the light bulbs 1. Switch off the extractor hood and pull out the mains plug or switch off the electricity supply at the fuse box. 2. Remove the grease filters (see Filters and Maintenance). 3. Press down the bulb cover and disconnect from the light strip. 4. Replace the bulb (standard filament bulb, max 40 W , E14 bulb holder). 5. A[...]

19 Important information Installation Instructions: Additional information concerning gas cookers:  When installing gas hotplates, comply with the relevant national statutory re gulations (e.g. in Germany: T echnische Regeln Gasinstallation TRGI).  Always comply with the currently valid r egulations and installation instructions supplied by t[...]

20 Prior to installation Exhaust-air mode The exhaust air is discharged upwards through a ventilation shaft or dir ectly through the outside wall into the open. D Exhaust air should neither be directed into a smoke or exhaust flue that is currently used for other purposes, nor into a shaft that is used for ventilating rooms in which stoves or fir[...]

21 Prior to installation ❑ Flat ducts must have an internal cross- section that equates to that of round pipes. There should be no sharp bends. l 100 mm approx. 1 78 cm 2 l 125 mm approx. 113 cm 2 ❑ If pipes have differ ent diameters: Insert sealing strip. ❑ For exhaust-air mode, ensure that there is an adequate supply of fr esh air . Connect[...]

22 Electrical connection This is what you have to do: 1. Connect the green and yellow (Earth) wire to the terminal in the plug marked ‘E’ or with the symbol ( ), or coloured gr een or green and yellow . 2. Connect the blue (Neutral) wire to the terminal in the plug marked ‘N’ or coloured black. 3. Connect the brown (Live) wir e to the termi[...]

23 Installation This extractor hood is intended to be mounted onto the kitchen wall. 1. Remove the grease filter (r efer to Operating Instructions). 2. Draw a line on the wall from the ceiling to the lower edge of the hood at the centre of the location wher e the hood is going to be mounted. 3. Using the template, mark positions on the wall for th[...]

24 Installation 0 8. Insert the other 4 screws with washers.  Before the 4 scr ews are tightened down, align the extractor hood properly . 0 9. Connect up the air outlet pipe. 10. Connect the hood to the electricity supply . 13. Position the lower flue duct on the extractor hood and screw the extractor hood to the flue duct from below with 2 l[...]

136 Notes[...]

139 353121 90 cm: DHZ 9055 60 cm: DHZ 6055 90 cm: DHZ 9550 60 cm: DHZ 6550 1 2 1 DHZ 5145[...]

9000 019 148 Printed in Germany 0904 Es. Robert Bosch Hausgeräte GmbH[...]