Bosch Appliances NET 682 C инструкция обслуживания

BOSCH IT Istruzioni per l’uso GB Directions fo r use ES Instruccion es de manejo PT Instruções d e Serviço FR Mode d’emploi DE Gebrauchsanleit ung NL Gebruiksaanw ijzing NCT 685 C NET 682 C NCT 685 B NCT 685 N NET 682 N NCT 675 N BOSCH[...]

ITALIANO 3 – 17 Vi ringraziamo per aver scelto questo nostro prodotto. Vi consigliamo di leggere attentamente questo m anuale, che riporta tutte le indicazioni per mantenere inalterate le qualità estetiche e funzionali del piano di cottura. ENGLISH 18 – 32 Thank you for choosing our product. We advise you to read this manual carefully. It cont[...]

Contents 18 1. INSTRUCTIONS FOR SAFE A ND PROP ER USE _______________ 19 2. POSITIONI NG OF HOB ____________________________________ 21 3. ELECTRIC AL CON NECTIO N _______________________________ 22 4. GAS CON NECTION _______________________________________ 23 5. ADAPTAT ION TO DIF FER ENT TYPES O F G AS ________________ 25 6. FINAL O PERATION S __[...]

Introduction 19 1. INSTR UCTIONS FOR SAFE AND PROPER USE THIS MANUAL IS AN INTEGR AL PART OF TH E APPLIANC E AND THEREFOR E MUST BE KEPT IN ITS ENTIR ETY AND IN AN ACCESSIBL E PLACE FOR THE WHOL E WORKIN G LIFE OF TH E COOKING HOB. WE ADVIS E READI NG THIS M ANUAL AND ALL THE INST RUCTIONS THEREIN BEFO RE USING THE COO KING HO B. ALSO KEEP THE SERI[...]

Introduction 20 THE I DENTI FICATI ON P LATE, WITH TE CHNICAL DAT A, SE RIAL NUM BER AND MARK ING IS CLE ARLY V ISIB LE UNDER THE CASING. THE PLAT E ON THE CAS ING MUST NOT BE REMOV ED. BEFORE CON NECTIN G THE DEVIC E, MAKE SURE TH AT IT HAS BEEN REGULATED FOR THE TYPE O F GAS THAT WILL FEED IT, C HECKING THE LABEL UNDER THE CASING. DO NOT PUT PANS[...]

Instructions for the installer 21 2. POSITIONING OF HOB The following operation requires building and/or carpentry work so must be carried out by a competent tradesman. Installation can be carried out on various materials such as masonry, metal, solid wood or plastic laminated w ood as long as they are heat resistant (T 90°C). 2.1.1 Attachment to [...]

Instructions for the installer 22 3. ELECTRICAL CONNECTION Make sure that the voltage and capacity of the pow er line conform to the data shown on the plate located under the casing. Do not remove this plate for any reason. The plug on the end of the supply cable and the wall socket must be the same type and conform to the current electrical system[...]

Instructions for the installer 23 4. GAS CONNECTION Connection to the gas mains m ay be made with a rigid copper pipe or with a flexible pipe and conforming to the provisions defined by standard regulations in force. To facilitate connection, fitting A on the rear of the appliance may be adjusted laterally. For this purpose, loosen hexagon nut B , [...]

Instructions for the installer 24 4.1 Connection to L PG Use a pressure regulator and make the connection to the tank according to the provisions of standards regulations in force. Make sure that feed pressure conforms to the levels shown in the table in paragraph “5.2 Regulation for LPG”. 4.2 Ventilation of rooms The hob may be installed only [...]

Instructions for the installer 25 5. AD APT A TION T O DIFFERENT TYPES OF GAS Before performing any cleaning or maintenance work, detach the appliance from the electrical socket. The hob has been inspected for G20 (2H) natural gas at a pressure of 20 mbar. For functioning with other types of gas the nozzles must be replaced and the primary air adju[...]

Instructions for the installer 26 5.2 Regulation for LPG Loosen screw A and push support B all the w ay. Use a double head wrench to remove nozzle C and assemble the suitable one, following the instructions indicated in the reference charts, with respect to the type of gas to use. The screwing torque of the nozzle should never exceed 3 Nm . Reposit[...]

Instructions for the installer 27 5.3 Regulation for natural gas The hob has been inspected for G20 (2H) natural gas at a pressure of 20 mbar. To allow the unit to work with this type of gas, perform the sam e operations described in paragraph “5.2 Regulation for LPG”, but choose the nozzles and regulate the primary air for natural gas, as show[...]

Instructions for the installer 28 6. FINAL OPERA TIONS Having carried out the above adjustm ents, reassemble the appliance following, backwards, the instructions in paragraph “5.1 Removing the hob”. 6.1 Regulat ion of minimum f or natural gas Replace the components on the burner and slide the knobs on the gas tap pins. Light the burner and set [...]

Instructions for the installer 29 6.3 Arrangement of burner s on hob BURNERS 1 Auxiliary 2 Semi-r apid 3 Average rapid 4 Large rapid 5-6 Triple crow n 7 Double crown 6.4 Lubrication of gas taps After a while, the gas tap may become hard to turn or lock. If this happens, it has to be cleaned inside and re-greased. This must be done by a qualified te[...]

Instructions for the user 30 7. USING THE HOB Make sure that the flame-baffle crowns, the caps and the grid have been assembled correctly. G rid A (supplied) should be used for "woks" (Chinese pots). Adapter B (supplied) is to be used for small vessels. 7.1 Ignition of the burners with safety dev ice For each knob the corresponding burner[...]

Instructions for the user 31 7.3 Diameter of container s BURNERS 1 Auxiliary 2 Semi-r apid 3 Average rapid 4 Large rapid 5-6 Triple crow n 7 Double crown Ø min. e m ax. (in cm) 7-18 10-24 12-24 14-28 22-26 12-34[...]

Instructions for the user 32 8. CLEANING AND MAINTENANCE Before any intervention, disconnect the power supply of the device. 8.1 Cleaning Clean the cooking top regularly every time you use it, obviously after it has cooled. 8.1.1 Regular daily cleaning of the hob In order to clean and preserve the surface, always use specific products only , which [...]