Broan Broam Elite Range Hood инструкция обслуживания

MODELS RMIP33 AND RMIP45 INTENDED FOR DOMESTIC COOKING ONL Y INST ALLER: LEA VE THIS MANU AL WITH HOMEO WNER. HOMEO WNER: USE AND CARE INFORMA TION ON P A GES 12 AND 13. Broan-NuT one LLC; Har tf ord, Wisconsin www .broan.com 800-558-1711 Broan-NuT one Canada; Mississauga, Ontario www .broan.ca 877-896-1119 REGISTER Y OUR PRODUCT ON LINE A T : www [...]

W ARNING W ARNING - 2 - T O REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJUR Y TO PERSONS, OBSER VE THE FOLLO WING: 1. Use this unit only in the manner intended by the manuf acturer . If you hav e questions, contact the manuf acturer at the address or telephone number listed in the warranty . 2. Bef ore ser vicing or cleaning unit, switch po wer of[...]

HL0067 - 3 - RMP Series Backsplash (Stainless Steel wall cov ering with war ming shelves . Optional) RML3336S, RML3342S , RML4548S, RML4554S or RML4560S Custom Hood Liner (optional) Model 415 7” Rd adjustable elbow (optional) 8” Rd adjustable elbow (optional) Model 412 transition (3¼ ” x 10” to 7”) Adapter and damper 3¼ ’ ’ x 10’ [...]

- 4 - HL006 8 RMP Series Backsplash (Stainless Steel wall cov ering with war ming shelves . Optional) RML3336S, RML3342S , RML4548S, RML4554S or RML4560S Custom Hood Liner (optional) Model 418 10” Rd adjustable elbo w (optional) Model HLB3 (280 cfm) in-line blo wer (includes one 8” to 10” round transition) RMIP33 OR RMIP45 INSERT - RMIP33 AND[...]

- 5 - 1. SELECT BLOWER OPTION AND INST ALL DUCTWORK Either an interior or exterior blo wer or in-line blo wer may be used with this insert. The inser t model RMIP33 or RMIP45 must be installed with blo wer models P5, P8, HLB3, HLB6, HLB9, HLB11, 331H, 332H, 335 or 336 only . Other blo wers cannot be substituted. (Blowers sold separately). Plan wher[...]

- 6 - 3. INST ALL BACKSPLASH (OPTIONAL) It is recommended to install the backsplash bef ore the custom hood inser t. The custom hood will cover the bac ksplash top mounting screws . In order to be able to install the bac ksplash, make sure y ou hav e at least 18’ ’ clearance between bottom of custom hood and range control panel or cooktop . (Se[...]

- 7 - 8. CUT THE HOLE IN CUST OM HOOD BASE If it is not done yet, cut a hole in the bottom of the cabinet, using the dimensions shown beside . NO TES : 1. The notch shown in the inset must be cut only if t he RMIPWC optional remote control will be installed. 2. The recommended distance from the back to the rearmost cutout edge is 2¼ ’ ’ minimu[...]

- 8 - 1 1. INST ALL THE DEVIA T OR (INTERIOR BLOWER) Install the de viator as shown. NO TE : T o prev ent the deviator from sliding out of the rough-in plate , put some tape on the de viator base after sliding it into the rough-in plate (provided with the P5 and P8 b lower) opening. If installed correctly , the deviator will protrude about 1/8” a[...]

- 9 - 13. CONNECT WIRING (ALL BLOWERS) Connect cable into wiring bo x using provided wire connectors. Connect wires as f ollow: BLA CK to BLACK, WHITE to WHITE and GREEN or BARE wire under ground scre w . DO NOT FORGET TO CONNECT THE GROUND . Reinstall wiring cover . W ARNING Risk of electrical shock. Electrical wiring must be done b y qualified pe[...]

- 10 - 16. DUCTING CONNECTION (ALL BLOWERS) A. When there is access to the top of the hood, connect ductwork and seal connections with duct tape after Step 17 Install the inser t. B. When there is no access to the top of the hood, carefully pull down the metal duct through the custom hood base hole. Slide this duct ov er the transition (interior bl[...]

- 11 - Secure the blo wer by installing 2 more no . 8 x 3/8’ ’ screws f or the P5 blo wer and 4 more no . 8 x 3/8’ ’ screws f or P8 into the locations shown in the pictures belo w (single blow er or dual blower). Reinstall impeller(s) and cover . HD0080 HD0081 Single blo wer (P5) Dual blo wer (P8) 18. INST ALL THE BLOWER (INTERIOR BLOWER) ([...]

- 12 - Grease filters and impeller(s). The grease filters, impeller(s) and g rease rail should be cleaned frequently . Use a warm detergent solution. Grease filters and impeller(s) are dishwasher saf e. Remov e greasse filters by pushing them to wards the back of hood and rotating do wnward. Clean all-metal filters in the dishwasher using a non-pho[...]

22. OPERA TION BLO WER The blo wer is operated using two (2) controls or with the RMIPWC optional w all control. Use the red, lighted on/off s witch to star t and stop the blow er . When tur ned on, the b lower will operate at the pre vious setting of the speed control. T ur n the speed control knob clockwise to decrease b lower speed - countercloc[...]

KEY P ART MODEL NO . NUMBER DESCRIPTION 33 45 RANGEMASTER LOGO FIL TER CLIP THERMOST A T SPEED CONTROL SCREW NO . 8-32 x 1/2’ ’, QUADREX MALE CONNECT OR FEMALE CONNECT OR TERMINAL STRIP LOCK NUT NO 8-32 SOCKET LAMP SPST DOUBLE SWITCH (HAL. LIGHT) SPST LIGHTED SINGLE SWITCH (BLOWER) SPEED CONTROL BUTT ON MICROMESH FIL TERS 9.25’ ’ x 12.5’ [...]

KEY NO . P ART NUMBER DESCRIPTION QTY . - 15 - SER VICE P ARTS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 SV13296 SV03500 SV12997 SV03577 SV02160 SV01869 SV01857 SV01582 SV14973 SV01810 SV03400 SV01766 SV00871 SV02001 SV01831 SV11705 SV11614 SV01927 SV03495 SV03494 SV13230 SV03496 SV00660 SV05520 SV00613 1 1 1 1 1 4 1 1 1 1 1 1 3 3[...]

21 22 23 2 3 20 24 25 1 19 18 17 16 15 13 6 9 10 11 12 14 4 5 KEY NO . P ART NUMBER DESCRIPTION QTY . 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 SV14971 SV13296 SV03500 SV14975 SV03577 SV01582 SV02160 SV01857 SV01766 SV03400 SV14974 SV01810 SV03399 SV03457 SV00871 SV01831 SV11705 SV11614 SV02001 SV01927 SV03495 SV03494 SV1496[...]