Broan E4DLSR инструкция обслуживания

E64000 SERIES INTENDED FOR DOMESTIC COOKING ONL Y INST ALLER: LEA VE THIS MANU AL WITH HOMEO WNER. HOMEO WNER: USE AND CARE INFORMA TION ON P A GES 13 AND 14. Broan-NuT one LLC; Har tf ord, Wisconsin www .broan.com 800-558-1711 Broan-NuT one Canada; Mississauga, Ontario www .broan.ca 877-896-1119 REGISTER Y OUR PRODUCT ON LINE A T : www .broan.com/[...]

W ARNING W ARNING - 2 - T O REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJUR Y TO PERSONS, OBSER VE THE FOLLO WING: 1. Use this unit only in the manner intended by the manuf acturer . If you hav e questions, contact the manuf acturer at the address or telephone number listed in the warranty . 2. Bef ore ser vicing or cleaning unit, switch po wer of[...]

HL0097 - 3 - RMP SERIES BA CKSPLASH (S T AINLESS S TEEL W ALL CO VERING WITH W ARMING SHEL VES . O PTIONAL .) 8” R OUND A DJUST ABLE E LBOW M ODEL 412 T RANSITION (3¼” X 10” TO 7”) A DAPTER /D AMPER 3¼’ ’ X 10’ ’ ( SUPPLIED WITH SINGLE BLOWER HOOD ) A DAPTER 4½” X 18½” ( SUPPLIED WITH DOUBLE BLOWER HOOD ) S T AND ARD D UCT ([...]

- 4 - HL009 8 RMP SERIES BA CKSPLASH (S T AINLESS S TEEL W ALL CO VERING WITH W ARMING SHEL VES . O PTIONAL ) E64000 SERIES HOOD - E64000 SERIES RANGE HOOD SYSTEM - IN-LINE AND EXTERIOR BLO WERS 332KR IN - LINE AND E XTERIOR B LOWER R OUGH - IN K IT ( SUPPLIED WITH HOOD ) M ODEL 418 10” R OUND A DJUST ABLE E LBOW M ODEL HLB3 (280 CFM ) I N - LINE[...]

- 5 - 1. SELECT BLOWER OPTION AND INST ALLA TION TYPE 1.2 D UCTED I NST ALLA TION The Broan Elite E64000 Series range hood includes many configurations: hood with single or double internal blow ers (included with the hood), or hood using e xter nal blo wers. For hood using e xter nal blo wers, the Broan Elite E64000 Series must be installed with in[...]

- 6 - 2. PREP ARE THE INST ALLA TION Make sure that the f ollowing items are included: - Range hood - Accessories: • Baffle filters • Baffle filters handles (located inside the hood) • 3¼” x 10” adapter/damper (located inside inter nal single blo wer hood) • 4½” x 18½” adapter (screwed inside internal double b lower hood) • In-[...]

- 7 - 2. PREP ARE THE INST ALLA TION (CONT’D) Cut-out the openings f or duct ( A ) and power cab le ( B ), in cabinet or wall, according to the direction of discharge chosen. See figures below . NO TE: F or all inter nal blo wer hoods, the cut-out opening f or house wiring can be made in cabinet bottom OR wall, no matter the discharge chosen (ver[...]

- 8 - 4. REMOVE FIL T ERS AND GREASE DRIP RAIL A. Remov e tape on filters. Remov e filters from hood and set aside. NO TE: It is recommended to star t with the center one(s). B. Remov e tape on grease drip rail ( 1 ). Lift out grease drip rail and set aside. HD0240 1 5. REMOVE THE ADAPTER (INTERNAL BLOWER HOODS ONL Y) Remov e both screws retaining [...]

- 9 - 6. CHOOSE THE OPENING(S) (INTERNAL BLOWER HOODS ONL Y) Remov e the knock out for the chosen opening(s) (horizontal at the bac k of the hood or vertical on top). See illustrations below . V ERTICAL DISCHARGE H ORIZONT AL DISCHARGE NO TE: F or ducted installation only . 1 2 3 HR0021 1 2 3 Punch out the appropriate electr ical knoc kout hole on [...]

- 10 - 7. HORIZONT AL DISCHARGE INST ALLA TION ( INTERNAL BLOWER(S) ONL Y) HD0271 Flip the blo wer and engage its flange in the back w all retaining brac ket. Using a 5/16” sock et and the screws pre viously remov ed, secure the blo wer to the hood. HD0272 8. INST ALL THE ADAPTER AND THE TRANSITION (IF NEED BE) (INTERNAL BLOWER HOOD ONL Y) Using [...]

- 11 - 10. INST ALL THE HOOD (ALL BLOWERS) HD0265 A B A B B INTERNAL BLO WER: Run power cab le to installation location. Place the hood in its location. Mar k the position of the scre ws (smaller par t of the ke y holes [ A ]) with a pen. Remov e the hood and install the (4) 1/2” doub le thread screws at marked positions , leaving a 1/8” gap. R[...]

- 12 - 13. INST ALL LIGHT BULBS This hood must use 120 V , 50 W , MR16 with GU10 base or P AR16 with GU10 base, shielded halogen lamps (not included). W ARNING In order to pre vent the risk of personal injury , do not install a lamp identified f or use only in enc losed fixtures. ! W ARNING In order to pre vent the risk of personal injury , the hal[...]

- 13 - 15. USE AND CARE Baffle Filters The baffle filters should be cleaned frequently . Use a war m detergent solution. W ash more often if your cooking style generates greater grease—lik e fr ying foods or w ok cooking. Remov e baffle filters by pushing them to wards the back of hood and rotating filters do wnward. Baffle filters are dishwasher[...]

- 14 - 16. OPERA TION (CONT’D) HC00 3 5 1) Halogen light knob 2) Blower operation indicator 3) ON/OFF blow er switch 4) Blower speed control knob 2 3 1 4 HC00 3 4 A) Halogen light knob B) Blower speed control knob A B COOKT OP LIGHTING (HALOGEN) A rotar y 3-position knob ( 1 ) controls the halogen lights (OFF - low intensity - high intensity). BL[...]

- 15 - 18. WIRING DIAGRAMS Broan Elite E64000 Series Internal blower hoods Broan Elite E64000 Series Exterior or In-Line blower hoods LINE NEUTRAL GROUND 120 V AC WHT M BRN BLU RED BLK M BRN BLU RED BLK WHT S PEED CONTROL H S THERMO S TAT BLU BLK BLK BLU BLK YEL WHT WHT WHT WHT WHT BLK BLK YEL YEL BLK ORA NEON LAMP ORA LAMP S WITCH L 1- 3 2 FAN S W[...]

- 16 - 19. SER VICE P ARTS HL0104 Broan Elite E64000 Series Internal blower hoods Broan Elite E64000 Series Exterior or In-Line blower hoods 6 7 14 17 * N OT SHO WN . K EY NO . P ART NO . D ESCRIPTION Q TY . ( H OOD WIDTH ) 30” 36” 42” 48” 2 SV06750 B ROAN E LITE L OGO 1 1 1 1 3 SV16569 L AMP S HELL , S OCKET & T RIM A SS ’ Y 2 2 3 3 [...]